|
|
|
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
|
|
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
|
|
// (found in the LICENSE.Apache file in the root directory).
|
|
|
|
//
|
|
|
|
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
|
|
|
|
// Use of this source code is governed by a BSD-style license that can be
|
|
|
|
// found in the LICENSE file. See the AUTHORS file for names of contributors.
|
|
|
|
#pragma once
|
|
|
|
|
|
|
|
#include <cstdint>
|
|
|
|
#include <memory>
|
|
|
|
#include <unordered_map>
|
|
|
|
#include <vector>
|
|
|
|
|
|
|
|
#include "db/log_format.h"
|
|
|
|
#include "rocksdb/compression_type.h"
|
Rate-limit automatic WAL flush after each user write (#9607)
Summary:
**Context:**
WAL flush is currently not rate-limited by `Options::rate_limiter`. This PR is to provide rate-limiting to auto WAL flush, the one that automatically happen after each user write operation (i.e, `Options::manual_wal_flush == false`), by adding `WriteOptions::rate_limiter_options`.
Note that we are NOT rate-limiting WAL flush that do NOT automatically happen after each user write, such as `Options::manual_wal_flush == true + manual FlushWAL()` (rate-limiting multiple WAL flushes), for the benefits of:
- being consistent with [ReadOptions::rate_limiter_priority](https://github.com/facebook/rocksdb/blob/7.0.fb/include/rocksdb/options.h#L515)
- being able to turn off some WAL flush's rate-limiting but not all (e.g, turn off specific the WAL flush of a critical user write like a service's heartbeat)
`WriteOptions::rate_limiter_options` only accept `Env::IO_USER` and `Env::IO_TOTAL` currently due to an implementation constraint.
- The constraint is that we currently queue parallel writes (including WAL writes) based on FIFO policy which does not factor rate limiter priority into this layer's scheduling. If we allow lower priorities such as `Env::IO_HIGH/MID/LOW` and such writes specified with lower priorities occurs before ones specified with higher priorities (even just by a tiny bit in arrival time), the former would have blocked the latter, leading to a "priority inversion" issue and contradictory to what we promise for rate-limiting priority. Therefore we only allow `Env::IO_USER` and `Env::IO_TOTAL` right now before improving that scheduling.
A pre-requisite to this feature is to support operation-level rate limiting in `WritableFileWriter`, which is also included in this PR.
**Summary:**
- Renamed test suite `DBRateLimiterTest to DBRateLimiterOnReadTest` for adding a new test suite
- Accept `rate_limiter_priority` in `WritableFileWriter`'s private and public write functions
- Passed `WriteOptions::rate_limiter_options` to `WritableFileWriter` in the path of automatic WAL flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9607
Test Plan:
- Added new unit test to verify existing flush/compaction rate-limiting does not break, since `DBTest, RateLimitingTest` is disabled and current db-level rate-limiting tests focus on read only (e.g, `db_rate_limiter_test`, `DBTest2, RateLimitedCompactionReads`).
- Added new unit test `DBRateLimiterOnWriteWALTest, AutoWalFlush`
- `strace -ftt -e trace=write ./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -rate_limit_auto_wal_flush=1 -rate_limiter_bytes_per_sec=15 -rate_limiter_refill_period_us=1000000 -write_buffer_size=100000000 -disable_auto_compactions=1 -num=100`
- verified that WAL flush(i.e, system-call _write_) were chunked into 15 bytes and each _write_ was roughly 1 second apart
- verified the chunking disappeared when `-rate_limit_auto_wal_flush=0`
- crash test: `python3 tools/db_crashtest.py blackbox --disable_wal=0 --rate_limit_auto_wal_flush=1 --rate_limiter_bytes_per_sec=10485760 --interval=10` killed as normal
**Benchmarked on flush/compaction to ensure no performance regression:**
- compaction with rate-limiting (see table 1, avg over 1280-run): pre-change: **915635 micros/op**; post-change:
**907350 micros/op (improved by 0.106%)**
```
#!/bin/bash
TEST_TMPDIR=/dev/shm/testdb
START=1
NUM_DATA_ENTRY=8
N=10
rm -f compact_bmk_output.txt compact_bmk_output_2.txt dont_care_output.txt
for i in $(eval echo "{$START..$NUM_DATA_ENTRY}")
do
NUM_RUN=$(($N*(2**($i-1))))
for j in $(eval echo "{$START..$NUM_RUN}")
do
./db_bench --benchmarks=fillrandom -db=$TEST_TMPDIR -disable_auto_compactions=1 -write_buffer_size=6710886 > dont_care_output.txt && ./db_bench --benchmarks=compact -use_existing_db=1 -db=$TEST_TMPDIR -level0_file_num_compaction_trigger=1 -rate_limiter_bytes_per_sec=100000000 | egrep 'compact'
done > compact_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' compact_bmk_output.txt >> compact_bmk_output_2.txt
done
```
- compaction w/o rate-limiting (see table 2, avg over 640-run): pre-change: **822197 micros/op**; post-change: **823148 micros/op (regressed by 0.12%)**
```
Same as above script, except that -rate_limiter_bytes_per_sec=0
```
- flush with rate-limiting (see table 3, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench ): pre-change: **745752 micros/op**; post-change: **745331 micros/op (regressed by 0.06 %)**
```
#!/bin/bash
TEST_TMPDIR=/dev/shm/testdb
START=1
NUM_DATA_ENTRY=8
N=10
rm -f flush_bmk_output.txt flush_bmk_output_2.txt
for i in $(eval echo "{$START..$NUM_DATA_ENTRY}")
do
NUM_RUN=$(($N*(2**($i-1))))
for j in $(eval echo "{$START..$NUM_RUN}")
do
./db_bench -db=$TEST_TMPDIR -write_buffer_size=1048576000 -num=1000000 -rate_limiter_bytes_per_sec=100000000 -benchmarks=fillseq,flush | egrep 'flush'
done > flush_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' flush_bmk_output.txt >> flush_bmk_output_2.txt
done
```
- flush w/o rate-limiting (see table 4, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench): pre-change: **487512 micros/op**, post-change: **485856 micors/ops (improved by 0.34%)**
```
Same as above script, except that -rate_limiter_bytes_per_sec=0
```
| table 1 - compact with rate-limiting|
#-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%)
-- | -- | -- | -- | -- | --
10 | 896978 | 16046.9 | 901242 | 15670.9 | 0.475373978
20 | 893718 | 15813 | 886505 | 17544.7 | -0.8070778478
40 | 900426 | 23882.2 | 894958 | 15104.5 | -0.6072681153
80 | 906635 | 21761.5 | 903332 | 23948.3 | -0.3643141948
160 | 898632 | 21098.9 | 907583 | 21145 | 0.9960695813
3.20E+02 | 905252 | 22785.5 | 908106 | 25325.5 | 0.3152713278
6.40E+02 | 905213 | 23598.6 | 906741 | 21370.5 | 0.1688000504
**1.28E+03** | **908316** | **23533.1** | **907350** | **24626.8** | **-0.1063506533**
average over #-run | 901896.25 | 21064.9625 | 901977.125 | 20592.025 | 0.008967217682
| table 2 - compact w/o rate-limiting|
#-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%)
-- | -- | -- | -- | -- | --
10 | 811211 | 26996.7 | 807586 | 28456.4 | -0.4468627768
20 | 815465 | 14803.7 | 814608 | 28719.7 | -0.105093413
40 | 809203 | 26187.1 | 797835 | 25492.1 | -1.404839082
80 | 822088 | 28765.3 | 822192 | 32840.4 | 0.01265071379
160 | 821719 | 36344.7 | 821664 | 29544.9 | -0.006693285661
3.20E+02 | 820921 | 27756.4 | 821403 | 28347.7 | 0.05871454135
**6.40E+02** | **822197** | **28960.6** | **823148** | **30055.1** | **0.1156657103**
average over #-run | 8.18E+05 | 2.71E+04 | 8.15E+05 | 2.91E+04 | -0.25
| table 3 - flush with rate-limiting|
#-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%)
-- | -- | -- | -- | -- | --
10 | 741721 | 11770.8 | 740345 | 5949.76 | -0.1855144994
20 | 735169 | 3561.83 | 743199 | 9755.77 | 1.09226586
40 | 743368 | 8891.03 | 742102 | 8683.22 | -0.1703059588
80 | 742129 | 8148.51 | 743417 | 9631.58| 0.1735547324
160 | 749045 | 9757.21 | 746256 | 9191.86 | -0.3723407806
**3.20E+02** | **745752** | **9819.65** | **745331** | **9840.62** | **-0.0564530836**
6.40E+02 | 749006 | 11080.5 | 748173 | 10578.7 | -0.1112140624
average over #-run | 743741.4286 | 9004.218571 | 744117.5714 | 9090.215714 | 0.05057441238
| table 4 - flush w/o rate-limiting|
#-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%)
-- | -- | -- | -- | -- | --
10 | 477283 | 24719.6 | 473864 | 12379 | -0.7163464863
20 | 486743 | 20175.2 | 502296 | 23931.3 | 3.195320734
40 | 482846 | 15309.2 | 489820 | 22259.5 | 1.444352858
80 | 491490 | 21883.1 | 490071 | 23085.7 | -0.2887139108
160 | 493347 | 28074.3 | 483609 | 21211.7 | -1.973864238
**3.20E+02** | **487512** | **21401.5** | **485856** | **22195.2** | **-0.3396839462**
6.40E+02 | 490307 | 25418.6 | 485435 | 22405.2 | -0.9936631539
average over #-run | 4.87E+05 | 2.24E+04 | 4.87E+05 | 2.11E+04 | 0.00E+00
Reviewed By: ajkr
Differential Revision: D34442441
Pulled By: hx235
fbshipit-source-id: 4790f13e1e5c0a95ae1d1cc93ffcf69dc6e78bdd
3 years ago
|
|
|
#include "rocksdb/env.h"
|
Pass IOStatus to write path and set retryable IO Error as hard error in BG jobs (#6487)
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.
The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487
Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check
Reviewed By: anand1976
Differential Revision: D20685017
Pulled By: zhichao-cao
fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
5 years ago
|
|
|
#include "rocksdb/io_status.h"
|
|
|
|
#include "rocksdb/slice.h"
|
|
|
|
#include "rocksdb/status.h"
|
|
|
|
#include "util/compression.h"
|
|
|
|
#include "util/hash_containers.h"
|
|
|
|
|
|
|
|
namespace ROCKSDB_NAMESPACE {
|
|
|
|
|
Move rate_limiter, write buffering, most perf context instrumentation and most random kill out of Env
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
10 years ago
|
|
|
class WritableFileWriter;
|
|
|
|
|
|
|
|
namespace log {
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Writer is a general purpose log stream writer. It provides an append-only
|
|
|
|
* abstraction for writing data. The details of the how the data is written is
|
|
|
|
* handled by the WritableFile sub-class implementation.
|
|
|
|
*
|
|
|
|
* File format:
|
|
|
|
*
|
|
|
|
* File is broken down into variable sized records. The format of each record
|
|
|
|
* is described below.
|
|
|
|
* +-----+-------------+--+----+----------+------+-- ... ----+
|
|
|
|
* File | r0 | r1 |P | r2 | r3 | r4 | |
|
|
|
|
* +-----+-------------+--+----+----------+------+-- ... ----+
|
|
|
|
* <--- kBlockSize ------>|<-- kBlockSize ------>|
|
|
|
|
* rn = variable size records
|
|
|
|
* P = Padding
|
|
|
|
*
|
|
|
|
* Data is written out in kBlockSize chunks. If next record does not fit
|
|
|
|
* into the space left, the leftover space will be padded with \0.
|
|
|
|
*
|
|
|
|
* Legacy record format:
|
|
|
|
*
|
|
|
|
* +---------+-----------+-----------+--- ... ---+
|
|
|
|
* |CRC (4B) | Size (2B) | Type (1B) | Payload |
|
|
|
|
* +---------+-----------+-----------+--- ... ---+
|
|
|
|
*
|
|
|
|
* CRC = 32bit hash computed over the record type and payload using CRC
|
|
|
|
* Size = Length of the payload data
|
|
|
|
* Type = Type of record
|
|
|
|
* (kZeroType, kFullType, kFirstType, kLastType, kMiddleType )
|
|
|
|
* The type is used to group a bunch of records together to represent
|
|
|
|
* blocks that are larger than kBlockSize
|
|
|
|
* Payload = Byte stream as long as specified by the payload size
|
|
|
|
*
|
|
|
|
* Recyclable record format:
|
|
|
|
*
|
|
|
|
* +---------+-----------+-----------+----------------+--- ... ---+
|
|
|
|
* |CRC (4B) | Size (2B) | Type (1B) | Log number (4B)| Payload |
|
|
|
|
* +---------+-----------+-----------+----------------+--- ... ---+
|
|
|
|
*
|
|
|
|
* Same as above, with the addition of
|
|
|
|
* Log number = 32bit log file number, so that we can distinguish between
|
|
|
|
* records written by the most recent log writer vs a previous one.
|
|
|
|
*/
|
|
|
|
class Writer {
|
|
|
|
public:
|
|
|
|
// Create a writer that will append data to "*dest".
|
|
|
|
// "*dest" must be initially empty.
|
|
|
|
// "*dest" must remain live while this Writer is in use.
|
|
|
|
explicit Writer(std::unique_ptr<WritableFileWriter>&& dest,
|
|
|
|
uint64_t log_number, bool recycle_log_files,
|
|
|
|
bool manual_flush = false,
|
|
|
|
CompressionType compressionType = kNoCompression);
|
|
|
|
// No copying allowed
|
|
|
|
Writer(const Writer&) = delete;
|
|
|
|
void operator=(const Writer&) = delete;
|
|
|
|
|
|
|
|
~Writer();
|
|
|
|
|
Rate-limit automatic WAL flush after each user write (#9607)
Summary:
**Context:**
WAL flush is currently not rate-limited by `Options::rate_limiter`. This PR is to provide rate-limiting to auto WAL flush, the one that automatically happen after each user write operation (i.e, `Options::manual_wal_flush == false`), by adding `WriteOptions::rate_limiter_options`.
Note that we are NOT rate-limiting WAL flush that do NOT automatically happen after each user write, such as `Options::manual_wal_flush == true + manual FlushWAL()` (rate-limiting multiple WAL flushes), for the benefits of:
- being consistent with [ReadOptions::rate_limiter_priority](https://github.com/facebook/rocksdb/blob/7.0.fb/include/rocksdb/options.h#L515)
- being able to turn off some WAL flush's rate-limiting but not all (e.g, turn off specific the WAL flush of a critical user write like a service's heartbeat)
`WriteOptions::rate_limiter_options` only accept `Env::IO_USER` and `Env::IO_TOTAL` currently due to an implementation constraint.
- The constraint is that we currently queue parallel writes (including WAL writes) based on FIFO policy which does not factor rate limiter priority into this layer's scheduling. If we allow lower priorities such as `Env::IO_HIGH/MID/LOW` and such writes specified with lower priorities occurs before ones specified with higher priorities (even just by a tiny bit in arrival time), the former would have blocked the latter, leading to a "priority inversion" issue and contradictory to what we promise for rate-limiting priority. Therefore we only allow `Env::IO_USER` and `Env::IO_TOTAL` right now before improving that scheduling.
A pre-requisite to this feature is to support operation-level rate limiting in `WritableFileWriter`, which is also included in this PR.
**Summary:**
- Renamed test suite `DBRateLimiterTest to DBRateLimiterOnReadTest` for adding a new test suite
- Accept `rate_limiter_priority` in `WritableFileWriter`'s private and public write functions
- Passed `WriteOptions::rate_limiter_options` to `WritableFileWriter` in the path of automatic WAL flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9607
Test Plan:
- Added new unit test to verify existing flush/compaction rate-limiting does not break, since `DBTest, RateLimitingTest` is disabled and current db-level rate-limiting tests focus on read only (e.g, `db_rate_limiter_test`, `DBTest2, RateLimitedCompactionReads`).
- Added new unit test `DBRateLimiterOnWriteWALTest, AutoWalFlush`
- `strace -ftt -e trace=write ./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -rate_limit_auto_wal_flush=1 -rate_limiter_bytes_per_sec=15 -rate_limiter_refill_period_us=1000000 -write_buffer_size=100000000 -disable_auto_compactions=1 -num=100`
- verified that WAL flush(i.e, system-call _write_) were chunked into 15 bytes and each _write_ was roughly 1 second apart
- verified the chunking disappeared when `-rate_limit_auto_wal_flush=0`
- crash test: `python3 tools/db_crashtest.py blackbox --disable_wal=0 --rate_limit_auto_wal_flush=1 --rate_limiter_bytes_per_sec=10485760 --interval=10` killed as normal
**Benchmarked on flush/compaction to ensure no performance regression:**
- compaction with rate-limiting (see table 1, avg over 1280-run): pre-change: **915635 micros/op**; post-change:
**907350 micros/op (improved by 0.106%)**
```
#!/bin/bash
TEST_TMPDIR=/dev/shm/testdb
START=1
NUM_DATA_ENTRY=8
N=10
rm -f compact_bmk_output.txt compact_bmk_output_2.txt dont_care_output.txt
for i in $(eval echo "{$START..$NUM_DATA_ENTRY}")
do
NUM_RUN=$(($N*(2**($i-1))))
for j in $(eval echo "{$START..$NUM_RUN}")
do
./db_bench --benchmarks=fillrandom -db=$TEST_TMPDIR -disable_auto_compactions=1 -write_buffer_size=6710886 > dont_care_output.txt && ./db_bench --benchmarks=compact -use_existing_db=1 -db=$TEST_TMPDIR -level0_file_num_compaction_trigger=1 -rate_limiter_bytes_per_sec=100000000 | egrep 'compact'
done > compact_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' compact_bmk_output.txt >> compact_bmk_output_2.txt
done
```
- compaction w/o rate-limiting (see table 2, avg over 640-run): pre-change: **822197 micros/op**; post-change: **823148 micros/op (regressed by 0.12%)**
```
Same as above script, except that -rate_limiter_bytes_per_sec=0
```
- flush with rate-limiting (see table 3, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench ): pre-change: **745752 micros/op**; post-change: **745331 micros/op (regressed by 0.06 %)**
```
#!/bin/bash
TEST_TMPDIR=/dev/shm/testdb
START=1
NUM_DATA_ENTRY=8
N=10
rm -f flush_bmk_output.txt flush_bmk_output_2.txt
for i in $(eval echo "{$START..$NUM_DATA_ENTRY}")
do
NUM_RUN=$(($N*(2**($i-1))))
for j in $(eval echo "{$START..$NUM_RUN}")
do
./db_bench -db=$TEST_TMPDIR -write_buffer_size=1048576000 -num=1000000 -rate_limiter_bytes_per_sec=100000000 -benchmarks=fillseq,flush | egrep 'flush'
done > flush_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' flush_bmk_output.txt >> flush_bmk_output_2.txt
done
```
- flush w/o rate-limiting (see table 4, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench): pre-change: **487512 micros/op**, post-change: **485856 micors/ops (improved by 0.34%)**
```
Same as above script, except that -rate_limiter_bytes_per_sec=0
```
| table 1 - compact with rate-limiting|
#-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%)
-- | -- | -- | -- | -- | --
10 | 896978 | 16046.9 | 901242 | 15670.9 | 0.475373978
20 | 893718 | 15813 | 886505 | 17544.7 | -0.8070778478
40 | 900426 | 23882.2 | 894958 | 15104.5 | -0.6072681153
80 | 906635 | 21761.5 | 903332 | 23948.3 | -0.3643141948
160 | 898632 | 21098.9 | 907583 | 21145 | 0.9960695813
3.20E+02 | 905252 | 22785.5 | 908106 | 25325.5 | 0.3152713278
6.40E+02 | 905213 | 23598.6 | 906741 | 21370.5 | 0.1688000504
**1.28E+03** | **908316** | **23533.1** | **907350** | **24626.8** | **-0.1063506533**
average over #-run | 901896.25 | 21064.9625 | 901977.125 | 20592.025 | 0.008967217682
| table 2 - compact w/o rate-limiting|
#-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%)
-- | -- | -- | -- | -- | --
10 | 811211 | 26996.7 | 807586 | 28456.4 | -0.4468627768
20 | 815465 | 14803.7 | 814608 | 28719.7 | -0.105093413
40 | 809203 | 26187.1 | 797835 | 25492.1 | -1.404839082
80 | 822088 | 28765.3 | 822192 | 32840.4 | 0.01265071379
160 | 821719 | 36344.7 | 821664 | 29544.9 | -0.006693285661
3.20E+02 | 820921 | 27756.4 | 821403 | 28347.7 | 0.05871454135
**6.40E+02** | **822197** | **28960.6** | **823148** | **30055.1** | **0.1156657103**
average over #-run | 8.18E+05 | 2.71E+04 | 8.15E+05 | 2.91E+04 | -0.25
| table 3 - flush with rate-limiting|
#-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%)
-- | -- | -- | -- | -- | --
10 | 741721 | 11770.8 | 740345 | 5949.76 | -0.1855144994
20 | 735169 | 3561.83 | 743199 | 9755.77 | 1.09226586
40 | 743368 | 8891.03 | 742102 | 8683.22 | -0.1703059588
80 | 742129 | 8148.51 | 743417 | 9631.58| 0.1735547324
160 | 749045 | 9757.21 | 746256 | 9191.86 | -0.3723407806
**3.20E+02** | **745752** | **9819.65** | **745331** | **9840.62** | **-0.0564530836**
6.40E+02 | 749006 | 11080.5 | 748173 | 10578.7 | -0.1112140624
average over #-run | 743741.4286 | 9004.218571 | 744117.5714 | 9090.215714 | 0.05057441238
| table 4 - flush w/o rate-limiting|
#-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%)
-- | -- | -- | -- | -- | --
10 | 477283 | 24719.6 | 473864 | 12379 | -0.7163464863
20 | 486743 | 20175.2 | 502296 | 23931.3 | 3.195320734
40 | 482846 | 15309.2 | 489820 | 22259.5 | 1.444352858
80 | 491490 | 21883.1 | 490071 | 23085.7 | -0.2887139108
160 | 493347 | 28074.3 | 483609 | 21211.7 | -1.973864238
**3.20E+02** | **487512** | **21401.5** | **485856** | **22195.2** | **-0.3396839462**
6.40E+02 | 490307 | 25418.6 | 485435 | 22405.2 | -0.9936631539
average over #-run | 4.87E+05 | 2.24E+04 | 4.87E+05 | 2.11E+04 | 0.00E+00
Reviewed By: ajkr
Differential Revision: D34442441
Pulled By: hx235
fbshipit-source-id: 4790f13e1e5c0a95ae1d1cc93ffcf69dc6e78bdd
3 years ago
|
|
|
IOStatus AddRecord(const Slice& slice,
|
|
|
|
Env::IOPriority rate_limiter_priority = Env::IO_TOTAL);
|
|
|
|
IOStatus AddCompressionTypeRecord();
|
|
|
|
|
|
|
|
// If there are column families in `cf_to_ts_sz` not included in
|
|
|
|
// `recorded_cf_to_ts_sz_` and its user-defined timestamp size is non-zero,
|
|
|
|
// adds a record of type kUserDefinedTimestampSizeType or
|
|
|
|
// kRecyclableUserDefinedTimestampSizeType for these column families.
|
|
|
|
// This timestamp size record applies to all subsequent records.
|
|
|
|
IOStatus MaybeAddUserDefinedTimestampSizeRecord(
|
|
|
|
const UnorderedMap<uint32_t, size_t>& cf_to_ts_sz,
|
|
|
|
Env::IOPriority rate_limiter_priority = Env::IO_TOTAL);
|
|
|
|
|
Move rate_limiter, write buffering, most perf context instrumentation and most random kill out of Env
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
10 years ago
|
|
|
WritableFileWriter* file() { return dest_.get(); }
|
|
|
|
const WritableFileWriter* file() const { return dest_.get(); }
|
|
|
|
|
|
|
|
uint64_t get_log_number() const { return log_number_; }
|
|
|
|
|
Pass IOStatus to write path and set retryable IO Error as hard error in BG jobs (#6487)
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.
The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487
Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check
Reviewed By: anand1976
Differential Revision: D20685017
Pulled By: zhichao-cao
fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
5 years ago
|
|
|
IOStatus WriteBuffer();
|
|
|
|
|
Pass IOStatus to write path and set retryable IO Error as hard error in BG jobs (#6487)
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.
The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487
Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check
Reviewed By: anand1976
Differential Revision: D20685017
Pulled By: zhichao-cao
fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
5 years ago
|
|
|
IOStatus Close();
|
|
|
|
|
Add manual_wal_flush, FlushWAL() to stress/crash test (#10698)
Summary:
**Context/Summary:**
Introduce `manual_wal_flush_one_in` as titled.
- When `manual_wal_flush_one_in > 0`, we also need tracing to correctly verify recovery because WAL data can be lost in this case when `FlushWAL()` is not explicitly called by users of RocksDB (in our case, db stress) and the recovery from such potential WAL data loss is a prefix recovery that requires tracing to verify. As another consequence, we need to disable features can't run under unsync data loss with `manual_wal_flush_one_in`
Incompatibilities fixed along the way:
```
db_stress: db/db_impl/db_impl_open.cc:2063: static rocksdb::Status rocksdb::DBImpl::Open(const rocksdb::DBOptions&, const string&, const std::vector<rocksdb::ColumnFamilyDescriptor>&, std::vector<rocksdb::ColumnFamilyHandle*>*, rocksdb::DB**, bool, bool): Assertion `impl->TEST_WALBufferIsEmpty()' failed.
```
- It turns out that `Writer::AddCompressionTypeRecord` before this assertion `EmitPhysicalRecord(kSetCompressionType, encode.data(), encode.size());` but do not trigger flush if `manual_wal_flush` is set . This leads to `impl->TEST_WALBufferIsEmpty()' is false.
- As suggested, assertion is removed and violation case is handled by `FlushWAL(sync=true)` along with refactoring `TEST_WALBufferIsEmpty()` to be `WALBufferIsEmpty()` since it is used in prod code now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10698
Test Plan:
- Locally running `python3 tools/db_crashtest.py blackbox --manual_wal_flush_one_in=1 --manual_wal_flush=1 --sync_wal_one_in=100 --atomic_flush=1 --flush_one_in=100 --column_families=3`
- Joined https://github.com/facebook/rocksdb/pull/10624 in auto CI testings with all RocksDB stress/crash test jobs
Reviewed By: ajkr
Differential Revision: D39593752
Pulled By: ajkr
fbshipit-source-id: 3a2135bb792c52d2ffa60257d4fbc557fb04d2ce
2 years ago
|
|
|
bool BufferIsEmpty();
|
|
|
|
|
|
|
|
private:
|
|
|
|
std::unique_ptr<WritableFileWriter> dest_;
|
|
|
|
size_t block_offset_; // Current offset in block
|
|
|
|
uint64_t log_number_;
|
|
|
|
bool recycle_log_files_;
|
|
|
|
|
|
|
|
// crc32c values for all supported record types. These are
|
|
|
|
// pre-computed to reduce the overhead of computing the crc of the
|
|
|
|
// record type stored in the header.
|
|
|
|
uint32_t type_crc_[kMaxRecordType + 1];
|
|
|
|
|
Rate-limit automatic WAL flush after each user write (#9607)
Summary:
**Context:**
WAL flush is currently not rate-limited by `Options::rate_limiter`. This PR is to provide rate-limiting to auto WAL flush, the one that automatically happen after each user write operation (i.e, `Options::manual_wal_flush == false`), by adding `WriteOptions::rate_limiter_options`.
Note that we are NOT rate-limiting WAL flush that do NOT automatically happen after each user write, such as `Options::manual_wal_flush == true + manual FlushWAL()` (rate-limiting multiple WAL flushes), for the benefits of:
- being consistent with [ReadOptions::rate_limiter_priority](https://github.com/facebook/rocksdb/blob/7.0.fb/include/rocksdb/options.h#L515)
- being able to turn off some WAL flush's rate-limiting but not all (e.g, turn off specific the WAL flush of a critical user write like a service's heartbeat)
`WriteOptions::rate_limiter_options` only accept `Env::IO_USER` and `Env::IO_TOTAL` currently due to an implementation constraint.
- The constraint is that we currently queue parallel writes (including WAL writes) based on FIFO policy which does not factor rate limiter priority into this layer's scheduling. If we allow lower priorities such as `Env::IO_HIGH/MID/LOW` and such writes specified with lower priorities occurs before ones specified with higher priorities (even just by a tiny bit in arrival time), the former would have blocked the latter, leading to a "priority inversion" issue and contradictory to what we promise for rate-limiting priority. Therefore we only allow `Env::IO_USER` and `Env::IO_TOTAL` right now before improving that scheduling.
A pre-requisite to this feature is to support operation-level rate limiting in `WritableFileWriter`, which is also included in this PR.
**Summary:**
- Renamed test suite `DBRateLimiterTest to DBRateLimiterOnReadTest` for adding a new test suite
- Accept `rate_limiter_priority` in `WritableFileWriter`'s private and public write functions
- Passed `WriteOptions::rate_limiter_options` to `WritableFileWriter` in the path of automatic WAL flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9607
Test Plan:
- Added new unit test to verify existing flush/compaction rate-limiting does not break, since `DBTest, RateLimitingTest` is disabled and current db-level rate-limiting tests focus on read only (e.g, `db_rate_limiter_test`, `DBTest2, RateLimitedCompactionReads`).
- Added new unit test `DBRateLimiterOnWriteWALTest, AutoWalFlush`
- `strace -ftt -e trace=write ./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -rate_limit_auto_wal_flush=1 -rate_limiter_bytes_per_sec=15 -rate_limiter_refill_period_us=1000000 -write_buffer_size=100000000 -disable_auto_compactions=1 -num=100`
- verified that WAL flush(i.e, system-call _write_) were chunked into 15 bytes and each _write_ was roughly 1 second apart
- verified the chunking disappeared when `-rate_limit_auto_wal_flush=0`
- crash test: `python3 tools/db_crashtest.py blackbox --disable_wal=0 --rate_limit_auto_wal_flush=1 --rate_limiter_bytes_per_sec=10485760 --interval=10` killed as normal
**Benchmarked on flush/compaction to ensure no performance regression:**
- compaction with rate-limiting (see table 1, avg over 1280-run): pre-change: **915635 micros/op**; post-change:
**907350 micros/op (improved by 0.106%)**
```
#!/bin/bash
TEST_TMPDIR=/dev/shm/testdb
START=1
NUM_DATA_ENTRY=8
N=10
rm -f compact_bmk_output.txt compact_bmk_output_2.txt dont_care_output.txt
for i in $(eval echo "{$START..$NUM_DATA_ENTRY}")
do
NUM_RUN=$(($N*(2**($i-1))))
for j in $(eval echo "{$START..$NUM_RUN}")
do
./db_bench --benchmarks=fillrandom -db=$TEST_TMPDIR -disable_auto_compactions=1 -write_buffer_size=6710886 > dont_care_output.txt && ./db_bench --benchmarks=compact -use_existing_db=1 -db=$TEST_TMPDIR -level0_file_num_compaction_trigger=1 -rate_limiter_bytes_per_sec=100000000 | egrep 'compact'
done > compact_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' compact_bmk_output.txt >> compact_bmk_output_2.txt
done
```
- compaction w/o rate-limiting (see table 2, avg over 640-run): pre-change: **822197 micros/op**; post-change: **823148 micros/op (regressed by 0.12%)**
```
Same as above script, except that -rate_limiter_bytes_per_sec=0
```
- flush with rate-limiting (see table 3, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench ): pre-change: **745752 micros/op**; post-change: **745331 micros/op (regressed by 0.06 %)**
```
#!/bin/bash
TEST_TMPDIR=/dev/shm/testdb
START=1
NUM_DATA_ENTRY=8
N=10
rm -f flush_bmk_output.txt flush_bmk_output_2.txt
for i in $(eval echo "{$START..$NUM_DATA_ENTRY}")
do
NUM_RUN=$(($N*(2**($i-1))))
for j in $(eval echo "{$START..$NUM_RUN}")
do
./db_bench -db=$TEST_TMPDIR -write_buffer_size=1048576000 -num=1000000 -rate_limiter_bytes_per_sec=100000000 -benchmarks=fillseq,flush | egrep 'flush'
done > flush_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' flush_bmk_output.txt >> flush_bmk_output_2.txt
done
```
- flush w/o rate-limiting (see table 4, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench): pre-change: **487512 micros/op**, post-change: **485856 micors/ops (improved by 0.34%)**
```
Same as above script, except that -rate_limiter_bytes_per_sec=0
```
| table 1 - compact with rate-limiting|
#-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%)
-- | -- | -- | -- | -- | --
10 | 896978 | 16046.9 | 901242 | 15670.9 | 0.475373978
20 | 893718 | 15813 | 886505 | 17544.7 | -0.8070778478
40 | 900426 | 23882.2 | 894958 | 15104.5 | -0.6072681153
80 | 906635 | 21761.5 | 903332 | 23948.3 | -0.3643141948
160 | 898632 | 21098.9 | 907583 | 21145 | 0.9960695813
3.20E+02 | 905252 | 22785.5 | 908106 | 25325.5 | 0.3152713278
6.40E+02 | 905213 | 23598.6 | 906741 | 21370.5 | 0.1688000504
**1.28E+03** | **908316** | **23533.1** | **907350** | **24626.8** | **-0.1063506533**
average over #-run | 901896.25 | 21064.9625 | 901977.125 | 20592.025 | 0.008967217682
| table 2 - compact w/o rate-limiting|
#-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%)
-- | -- | -- | -- | -- | --
10 | 811211 | 26996.7 | 807586 | 28456.4 | -0.4468627768
20 | 815465 | 14803.7 | 814608 | 28719.7 | -0.105093413
40 | 809203 | 26187.1 | 797835 | 25492.1 | -1.404839082
80 | 822088 | 28765.3 | 822192 | 32840.4 | 0.01265071379
160 | 821719 | 36344.7 | 821664 | 29544.9 | -0.006693285661
3.20E+02 | 820921 | 27756.4 | 821403 | 28347.7 | 0.05871454135
**6.40E+02** | **822197** | **28960.6** | **823148** | **30055.1** | **0.1156657103**
average over #-run | 8.18E+05 | 2.71E+04 | 8.15E+05 | 2.91E+04 | -0.25
| table 3 - flush with rate-limiting|
#-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%)
-- | -- | -- | -- | -- | --
10 | 741721 | 11770.8 | 740345 | 5949.76 | -0.1855144994
20 | 735169 | 3561.83 | 743199 | 9755.77 | 1.09226586
40 | 743368 | 8891.03 | 742102 | 8683.22 | -0.1703059588
80 | 742129 | 8148.51 | 743417 | 9631.58| 0.1735547324
160 | 749045 | 9757.21 | 746256 | 9191.86 | -0.3723407806
**3.20E+02** | **745752** | **9819.65** | **745331** | **9840.62** | **-0.0564530836**
6.40E+02 | 749006 | 11080.5 | 748173 | 10578.7 | -0.1112140624
average over #-run | 743741.4286 | 9004.218571 | 744117.5714 | 9090.215714 | 0.05057441238
| table 4 - flush w/o rate-limiting|
#-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%)
-- | -- | -- | -- | -- | --
10 | 477283 | 24719.6 | 473864 | 12379 | -0.7163464863
20 | 486743 | 20175.2 | 502296 | 23931.3 | 3.195320734
40 | 482846 | 15309.2 | 489820 | 22259.5 | 1.444352858
80 | 491490 | 21883.1 | 490071 | 23085.7 | -0.2887139108
160 | 493347 | 28074.3 | 483609 | 21211.7 | -1.973864238
**3.20E+02** | **487512** | **21401.5** | **485856** | **22195.2** | **-0.3396839462**
6.40E+02 | 490307 | 25418.6 | 485435 | 22405.2 | -0.9936631539
average over #-run | 4.87E+05 | 2.24E+04 | 4.87E+05 | 2.11E+04 | 0.00E+00
Reviewed By: ajkr
Differential Revision: D34442441
Pulled By: hx235
fbshipit-source-id: 4790f13e1e5c0a95ae1d1cc93ffcf69dc6e78bdd
3 years ago
|
|
|
IOStatus EmitPhysicalRecord(
|
|
|
|
RecordType type, const char* ptr, size_t length,
|
|
|
|
Env::IOPriority rate_limiter_priority = Env::IO_TOTAL);
|
|
|
|
|
|
|
|
// If true, it does not flush after each write. Instead it relies on the upper
|
|
|
|
// layer to manually does the flush by calling ::WriteBuffer()
|
|
|
|
bool manual_flush_;
|
|
|
|
|
|
|
|
// Compression Type
|
|
|
|
CompressionType compression_type_;
|
|
|
|
StreamingCompress* compress_;
|
|
|
|
// Reusable compressed output buffer
|
|
|
|
std::unique_ptr<char[]> compressed_buffer_;
|
|
|
|
|
|
|
|
// The recorded user-defined timestamp size that have been written so far.
|
|
|
|
// Since the user-defined timestamp size cannot be changed while the DB is
|
|
|
|
// running, existing entry in this map cannot be updated.
|
|
|
|
UnorderedMap<uint32_t, size_t> recorded_cf_to_ts_sz_;
|
|
|
|
};
|
|
|
|
|
|
|
|
} // namespace log
|
|
|
|
} // namespace ROCKSDB_NAMESPACE
|