You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
rocksdb/db/blob/blob_file_reader.cc

625 lines
18 KiB

Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
#include "db/blob/blob_file_reader.h"
#include <cassert>
#include <string>
#include "db/blob/blob_contents.h"
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
#include "db/blob/blob_log_format.h"
#include "file/file_prefetch_buffer.h"
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
#include "file/filename.h"
#include "monitoring/statistics_impl.h"
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
#include "options/cf_options.h"
#include "rocksdb/file_system.h"
#include "rocksdb/slice.h"
#include "rocksdb/status.h"
#include "table/multiget_context.h"
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
#include "test_util/sync_point.h"
#include "util/compression.h"
#include "util/crc32c.h"
#include "util/stop_watch.h"
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
namespace ROCKSDB_NAMESPACE {
Status BlobFileReader::Create(
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2 years ago
const ImmutableOptions& immutable_options, const ReadOptions& read_options,
const FileOptions& file_options, uint32_t column_family_id,
HistogramImpl* blob_file_read_hist, uint64_t blob_file_number,
const std::shared_ptr<IOTracer>& io_tracer,
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
std::unique_ptr<BlobFileReader>* blob_file_reader) {
assert(blob_file_reader);
assert(!*blob_file_reader);
uint64_t file_size = 0;
std::unique_ptr<RandomAccessFileReader> file_reader;
{
const Status s =
OpenFile(immutable_options, file_options, blob_file_read_hist,
blob_file_number, io_tracer, &file_size, &file_reader);
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
if (!s.ok()) {
return s;
}
}
assert(file_reader);
Statistics* const statistics = immutable_options.stats;
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
CompressionType compression_type = kNoCompression;
{
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2 years ago
const Status s =
ReadHeader(file_reader.get(), read_options, column_family_id,
statistics, &compression_type);
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
if (!s.ok()) {
return s;
}
}
{
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2 years ago
const Status s =
ReadFooter(file_reader.get(), read_options, file_size, statistics);
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
if (!s.ok()) {
return s;
}
}
blob_file_reader->reset(
new BlobFileReader(std::move(file_reader), file_size, compression_type,
immutable_options.clock, statistics));
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
return Status::OK();
}
Status BlobFileReader::OpenFile(
const ImmutableOptions& immutable_options, const FileOptions& file_opts,
HistogramImpl* blob_file_read_hist, uint64_t blob_file_number,
const std::shared_ptr<IOTracer>& io_tracer, uint64_t* file_size,
std::unique_ptr<RandomAccessFileReader>* file_reader) {
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
assert(file_size);
assert(file_reader);
const auto& cf_paths = immutable_options.cf_paths;
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
assert(!cf_paths.empty());
const std::string blob_file_path =
BlobFileName(cf_paths.front().path, blob_file_number);
FileSystem* const fs = immutable_options.fs.get();
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
assert(fs);
constexpr IODebugContext* dbg = nullptr;
{
TEST_SYNC_POINT("BlobFileReader::OpenFile:GetFileSize");
const Status s =
fs->GetFileSize(blob_file_path, IOOptions(), file_size, dbg);
if (!s.ok()) {
return s;
}
}
if (*file_size < BlobLogHeader::kSize + BlobLogFooter::kSize) {
return Status::Corruption("Malformed blob file");
}
std::unique_ptr<FSRandomAccessFile> file;
{
TEST_SYNC_POINT("BlobFileReader::OpenFile:NewRandomAccessFile");
const Status s =
fs->NewRandomAccessFile(blob_file_path, file_opts, &file, dbg);
if (!s.ok()) {
return s;
}
}
assert(file);
if (immutable_options.advise_random_on_open) {
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
file->Hint(FSRandomAccessFile::kRandom);
}
file_reader->reset(new RandomAccessFileReader(
std::move(file), blob_file_path, immutable_options.clock, io_tracer,
immutable_options.stats, BLOB_DB_BLOB_FILE_READ_MICROS,
blob_file_read_hist, immutable_options.rate_limiter.get(),
immutable_options.listeners));
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
return Status::OK();
}
Status BlobFileReader::ReadHeader(const RandomAccessFileReader* file_reader,
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2 years ago
const ReadOptions& read_options,
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
uint32_t column_family_id,
Statistics* statistics,
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
CompressionType* compression_type) {
assert(file_reader);
assert(compression_type);
Slice header_slice;
Buffer buf;
AlignedBuf aligned_buf;
{
TEST_SYNC_POINT("BlobFileReader::ReadHeader:ReadFromFile");
constexpr uint64_t read_offset = 0;
constexpr size_t read_size = BlobLogHeader::kSize;
Add rate limiter priority to ReadOptions (#9424) Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
3 years ago
// TODO: rate limit reading headers from blob files.
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2 years ago
const Status s =
ReadFromFile(file_reader, read_options, read_offset, read_size,
statistics, &header_slice, &buf, &aligned_buf,
Env::IO_TOTAL /* rate_limiter_priority */);
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
if (!s.ok()) {
return s;
}
TEST_SYNC_POINT_CALLBACK("BlobFileReader::ReadHeader:TamperWithResult",
&header_slice);
}
BlobLogHeader header;
{
const Status s = header.DecodeFrom(header_slice);
if (!s.ok()) {
return s;
}
}
constexpr ExpirationRange no_expiration_range;
if (header.has_ttl || header.expiration_range != no_expiration_range) {
return Status::Corruption("Unexpected TTL blob file");
}
if (header.column_family_id != column_family_id) {
return Status::Corruption("Column family ID mismatch");
}
*compression_type = header.compression;
return Status::OK();
}
Status BlobFileReader::ReadFooter(const RandomAccessFileReader* file_reader,
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2 years ago
const ReadOptions& read_options,
uint64_t file_size, Statistics* statistics) {
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
assert(file_size >= BlobLogHeader::kSize + BlobLogFooter::kSize);
assert(file_reader);
Slice footer_slice;
Buffer buf;
AlignedBuf aligned_buf;
{
TEST_SYNC_POINT("BlobFileReader::ReadFooter:ReadFromFile");
const uint64_t read_offset = file_size - BlobLogFooter::kSize;
constexpr size_t read_size = BlobLogFooter::kSize;
Add rate limiter priority to ReadOptions (#9424) Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
3 years ago
// TODO: rate limit reading footers from blob files.
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2 years ago
const Status s =
ReadFromFile(file_reader, read_options, read_offset, read_size,
statistics, &footer_slice, &buf, &aligned_buf,
Env::IO_TOTAL /* rate_limiter_priority */);
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
if (!s.ok()) {
return s;
}
TEST_SYNC_POINT_CALLBACK("BlobFileReader::ReadFooter:TamperWithResult",
&footer_slice);
}
BlobLogFooter footer;
{
const Status s = footer.DecodeFrom(footer_slice);
if (!s.ok()) {
return s;
}
}
constexpr ExpirationRange no_expiration_range;
if (footer.expiration_range != no_expiration_range) {
return Status::Corruption("Unexpected TTL blob file");
}
return Status::OK();
}
Status BlobFileReader::ReadFromFile(const RandomAccessFileReader* file_reader,
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2 years ago
const ReadOptions& read_options,
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
uint64_t read_offset, size_t read_size,
Statistics* statistics, Slice* slice,
Add rate limiter priority to ReadOptions (#9424) Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
3 years ago
Buffer* buf, AlignedBuf* aligned_buf,
Env::IOPriority rate_limiter_priority) {
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
assert(slice);
assert(buf);
assert(aligned_buf);
assert(file_reader);
RecordTick(statistics, BLOB_DB_BLOB_FILE_BYTES_READ, read_size);
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
Status s;
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2 years ago
IOOptions io_options;
s = file_reader->PrepareIOOptions(read_options, io_options);
if (!s.ok()) {
return s;
}
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
if (file_reader->use_direct_io()) {
constexpr char* scratch = nullptr;
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2 years ago
s = file_reader->Read(io_options, read_offset, read_size, slice, scratch,
Add rate limiter priority to ReadOptions (#9424) Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
3 years ago
aligned_buf, rate_limiter_priority);
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
} else {
buf->reset(new char[read_size]);
constexpr AlignedBuf* aligned_scratch = nullptr;
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2 years ago
s = file_reader->Read(io_options, read_offset, read_size, slice, buf->get(),
aligned_scratch, rate_limiter_priority);
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
}
if (!s.ok()) {
return s;
}
if (slice->size() != read_size) {
return Status::Corruption("Failed to read data from blob file");
}
return Status::OK();
}
BlobFileReader::BlobFileReader(
std::unique_ptr<RandomAccessFileReader>&& file_reader, uint64_t file_size,
CompressionType compression_type, SystemClock* clock,
Statistics* statistics)
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
: file_reader_(std::move(file_reader)),
file_size_(file_size),
compression_type_(compression_type),
clock_(clock),
statistics_(statistics) {
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
assert(file_reader_);
}
BlobFileReader::~BlobFileReader() = default;
Status BlobFileReader::GetBlob(
const ReadOptions& read_options, const Slice& user_key, uint64_t offset,
uint64_t value_size, CompressionType compression_type,
FilePrefetchBuffer* prefetch_buffer, MemoryAllocator* allocator,
std::unique_ptr<BlobContents>* result, uint64_t* bytes_read) const {
assert(result);
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
const uint64_t key_size = user_key.size();
if (!IsValidBlobOffset(offset, key_size, value_size, file_size_)) {
return Status::Corruption("Invalid blob offset");
}
if (compression_type != compression_type_) {
return Status::Corruption("Compression type mismatch when reading blob");
}
// Note: if verify_checksum is set, we read the entire blob record to be able
// to perform the verification; otherwise, we just read the blob itself. Since
// the offset in BlobIndex actually points to the blob value, we need to make
// an adjustment in the former case.
const uint64_t adjustment =
read_options.verify_checksums
? BlobLogRecord::CalculateAdjustmentForRecordHeader(key_size)
: 0;
assert(offset >= adjustment);
const uint64_t record_offset = offset - adjustment;
const uint64_t record_size = value_size + adjustment;
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
Slice record_slice;
Buffer buf;
AlignedBuf aligned_buf;
bool prefetched = false;
if (prefetch_buffer) {
Status s;
constexpr bool for_compaction = true;
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2 years ago
IOOptions io_options;
s = file_reader_->PrepareIOOptions(read_options, io_options);
if (!s.ok()) {
return s;
}
prefetched = prefetch_buffer->TryReadFromCache(
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2 years ago
io_options, file_reader_.get(), record_offset,
Add rate limiter priority to ReadOptions (#9424) Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
3 years ago
static_cast<size_t>(record_size), &record_slice, &s,
read_options.rate_limiter_priority, for_compaction);
if (!s.ok()) {
return s;
}
}
if (!prefetched) {
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
TEST_SYNC_POINT("BlobFileReader::GetBlob:ReadFromFile");
PERF_COUNTER_ADD(blob_read_count, 1);
PERF_COUNTER_ADD(blob_read_byte, record_size);
PERF_TIMER_GUARD(blob_read_time);
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2 years ago
const Status s = ReadFromFile(
file_reader_.get(), read_options, record_offset,
static_cast<size_t>(record_size), statistics_, &record_slice, &buf,
&aligned_buf, read_options.rate_limiter_priority);
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
if (!s.ok()) {
return s;
}
}
TEST_SYNC_POINT_CALLBACK("BlobFileReader::GetBlob:TamperWithResult",
&record_slice);
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
if (read_options.verify_checksums) {
const Status s = VerifyBlob(record_slice, user_key, value_size);
if (!s.ok()) {
return s;
}
}
const Slice value_slice(record_slice.data() + adjustment, value_size);
{
const Status s = UncompressBlobIfNeeded(
value_slice, compression_type, allocator, clock_, statistics_, result);
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
if (!s.ok()) {
return s;
}
}
if (bytes_read) {
*bytes_read = record_size;
}
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
return Status::OK();
}
void BlobFileReader::MultiGetBlob(
const ReadOptions& read_options, MemoryAllocator* allocator,
autovector<std::pair<BlobReadRequest*, std::unique_ptr<BlobContents>>>&
blob_reqs,
uint64_t* bytes_read) const {
const size_t num_blobs = blob_reqs.size();
assert(num_blobs > 0);
assert(num_blobs <= MultiGetContext::MAX_BATCH_SIZE);
#ifndef NDEBUG
for (size_t i = 0; i < num_blobs - 1; ++i) {
assert(blob_reqs[i].first->offset <= blob_reqs[i + 1].first->offset);
}
#endif // !NDEBUG
std::vector<FSReadRequest> read_reqs;
autovector<uint64_t> adjustments;
uint64_t total_len = 0;
read_reqs.reserve(num_blobs);
for (size_t i = 0; i < num_blobs; ++i) {
BlobReadRequest* const req = blob_reqs[i].first;
assert(req);
assert(req->user_key);
assert(req->status);
const size_t key_size = req->user_key->size();
const uint64_t offset = req->offset;
const uint64_t value_size = req->len;
if (!IsValidBlobOffset(offset, key_size, value_size, file_size_)) {
*req->status = Status::Corruption("Invalid blob offset");
continue;
}
if (req->compression != compression_type_) {
*req->status =
Status::Corruption("Compression type mismatch when reading a blob");
continue;
}
const uint64_t adjustment =
read_options.verify_checksums
? BlobLogRecord::CalculateAdjustmentForRecordHeader(key_size)
: 0;
assert(req->offset >= adjustment);
adjustments.push_back(adjustment);
FSReadRequest read_req;
read_req.offset = req->offset - adjustment;
read_req.len = req->len + adjustment;
total_len += read_req.len;
read_reqs.emplace_back(std::move(read_req));
}
RecordTick(statistics_, BLOB_DB_BLOB_FILE_BYTES_READ, total_len);
Buffer buf;
AlignedBuf aligned_buf;
Status s;
bool direct_io = file_reader_->use_direct_io();
if (direct_io) {
for (size_t i = 0; i < read_reqs.size(); ++i) {
read_reqs[i].scratch = nullptr;
}
} else {
buf.reset(new char[total_len]);
std::ptrdiff_t pos = 0;
for (size_t i = 0; i < read_reqs.size(); ++i) {
read_reqs[i].scratch = buf.get() + pos;
pos += read_reqs[i].len;
}
}
TEST_SYNC_POINT("BlobFileReader::MultiGetBlob:ReadFromFile");
PERF_COUNTER_ADD(blob_read_count, num_blobs);
PERF_COUNTER_ADD(blob_read_byte, total_len);
s = file_reader_->MultiRead(IOOptions(), read_reqs.data(), read_reqs.size(),
Add rate limiter priority to ReadOptions (#9424) Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
3 years ago
direct_io ? &aligned_buf : nullptr,
read_options.rate_limiter_priority);
if (!s.ok()) {
for (auto& req : read_reqs) {
req.status.PermitUncheckedError();
}
for (auto& blob_req : blob_reqs) {
BlobReadRequest* const req = blob_req.first;
assert(req);
assert(req->status);
if (!req->status->IsCorruption()) {
// Avoid overwriting corruption status.
*req->status = s;
}
}
return;
}
assert(s.ok());
uint64_t total_bytes = 0;
for (size_t i = 0, j = 0; i < num_blobs; ++i) {
BlobReadRequest* const req = blob_reqs[i].first;
assert(req);
assert(req->user_key);
assert(req->status);
if (!req->status->ok()) {
continue;
}
assert(j < read_reqs.size());
auto& read_req = read_reqs[j++];
const auto& record_slice = read_req.result;
if (read_req.status.ok() && record_slice.size() != read_req.len) {
read_req.status =
IOStatus::Corruption("Failed to read data from blob file");
}
*req->status = read_req.status;
if (!req->status->ok()) {
continue;
}
// Verify checksums if enabled
if (read_options.verify_checksums) {
*req->status = VerifyBlob(record_slice, *req->user_key, req->len);
if (!req->status->ok()) {
continue;
}
}
// Uncompress blob if needed
Slice value_slice(record_slice.data() + adjustments[i], req->len);
*req->status =
UncompressBlobIfNeeded(value_slice, compression_type_, allocator,
clock_, statistics_, &blob_reqs[i].second);
if (req->status->ok()) {
total_bytes += record_slice.size();
}
}
if (bytes_read) {
*bytes_read = total_bytes;
}
}
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
Status BlobFileReader::VerifyBlob(const Slice& record_slice,
const Slice& user_key, uint64_t value_size) {
PERF_TIMER_GUARD(blob_checksum_time);
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
BlobLogRecord record;
const Slice header_slice(record_slice.data(), BlobLogRecord::kHeaderSize);
{
const Status s = record.DecodeHeaderFrom(header_slice);
if (!s.ok()) {
return s;
}
}
if (record.key_size != user_key.size()) {
return Status::Corruption("Key size mismatch when reading blob");
}
if (record.value_size != value_size) {
return Status::Corruption("Value size mismatch when reading blob");
}
record.key =
Slice(record_slice.data() + BlobLogRecord::kHeaderSize, record.key_size);
if (record.key != user_key) {
return Status::Corruption("Key mismatch when reading blob");
}
record.value = Slice(record.key.data() + record.key_size, value_size);
{
TEST_SYNC_POINT_CALLBACK("BlobFileReader::VerifyBlob:CheckBlobCRC",
&record);
const Status s = record.CheckBlobCRC();
if (!s.ok()) {
return s;
}
}
return Status::OK();
}
Status BlobFileReader::UncompressBlobIfNeeded(
const Slice& value_slice, CompressionType compression_type,
MemoryAllocator* allocator, SystemClock* clock, Statistics* statistics,
std::unique_ptr<BlobContents>* result) {
assert(result);
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
if (compression_type == kNoCompression) {
Major Cache refactoring, CPU efficiency improvement (#10975) Summary: This is several refactorings bundled into one to avoid having to incrementally re-modify uses of Cache several times. Overall, there are breaking changes to Cache class, and it becomes more of low-level interface for implementing caches, especially block cache. New internal APIs make using Cache cleaner than before, and more insulated from block cache evolution. Hopefully, this is the last really big block cache refactoring, because of rather effectively decoupling the implementations from the uses. This change also removes the EXPERIMENTAL designation on the SecondaryCache support in Cache. It seems reasonably mature at this point but still subject to change/evolution (as I warn in the API docs for Cache). The high-level motivation for this refactoring is to minimize code duplication / compounding complexity in adding SecondaryCache support to HyperClockCache (in a later PR). Other benefits listed below. * static_cast lines of code +29 -35 (net removed 6) * reinterpret_cast lines of code +6 -32 (net removed 26) ## cache.h and secondary_cache.h * Always use CacheItemHelper with entries instead of just a Deleter. There are several motivations / justifications: * Simpler for implementations to deal with just one Insert and one Lookup. * Simpler and more efficient implementation because we don't have to track which entries are using helpers and which are using deleters * Gets rid of hack to classify cache entries by their deleter. Instead, the CacheItemHelper includes a CacheEntryRole. This simplifies a lot of code (cache_entry_roles.h almost eliminated). Fixes https://github.com/facebook/rocksdb/issues/9428. * Makes it trivial to adjust SecondaryCache behavior based on kind of block (e.g. don't re-compress filter blocks). * It is arguably less convenient for many direct users of Cache, but direct users of Cache are now rare with introduction of typed_cache.h (below). * I considered and rejected an alternative approach in which we reduce customizability by assuming each secondary cache compatible value starts with a Slice referencing the uncompressed block contents (already true or mostly true), but we apparently intend to stack secondary caches. Saving an entry from a compressed secondary to a lower tier requires custom handling offered by SaveToCallback, etc. * Make CreateCallback part of the helper and introduce CreateContext to work with it (alternative to https://github.com/facebook/rocksdb/issues/10562). This cleans up the interface while still allowing context to be provided for loading/parsing values into primary cache. This model works for async lookup in BlockBasedTable reader (reader owns a CreateContext) under the assumption that it always waits on secondary cache operations to finish. (Otherwise, the CreateContext could be destroyed while async operation depending on it continues.) This likely contributes most to the observed performance improvement because it saves an std::function backed by a heap allocation. * Use char* for serialized data, e.g. in SaveToCallback, where void* was confusingly used. (We use `char*` for serialized byte data all over RocksDB, with many advantages over `void*`. `memcpy` etc. are legacy APIs that should not be mimicked.) * Add a type alias Cache::ObjectPtr = void*, so that we can better indicate the intent of the void* when it is to be the object associated with a Cache entry. Related: started (but did not complete) a refactoring to move away from "value" of a cache entry toward "object" or "obj". (It is confusing to call Cache a key-value store (like DB) when it is really storing arbitrary in-memory objects, not byte strings.) * Remove unnecessary key param from DeleterFn. This is good for efficiency in HyperClockCache, which does not directly store the cache key in memory. (Alternative to https://github.com/facebook/rocksdb/issues/10774) * Add allocator to Cache DeleterFn. This is a kind of future-proofing change in case we get more serious about using the Cache allocator for memory tracked by the Cache. Right now, only the uncompressed block contents are allocated using the allocator, and a pointer to that allocator is saved as part of the cached object so that the deleter can use it. (See CacheAllocationPtr.) If in the future we are able to "flatten out" our Cache objects some more, it would be good not to have to track the allocator as part of each object. * Removes legacy `ApplyToAllCacheEntries` and changes `ApplyToAllEntries` signature for Deleter->CacheItemHelper change. ## typed_cache.h Adds various "typed" interfaces to the Cache as internal APIs, so that most uses of Cache can use simple type safe code without casting and without explicit deleters, etc. Almost all of the non-test, non-glue code uses of Cache have been migrated. (Follow-up work: CompressedSecondaryCache deserves deeper attention to migrate.) This change expands RocksDB's internal usage of metaprogramming and SFINAE (https://en.cppreference.com/w/cpp/language/sfinae). The existing usages of Cache are divided up at a high level into these new interfaces. See updated existing uses of Cache for examples of how these are used. * PlaceholderCacheInterface - Used for making cache reservations, with entries that have a charge but no value. * BasicTypedCacheInterface<TValue> - Used for primary cache storage of objects of type TValue, which can be cleaned up with std::default_delete<TValue>. The role is provided by TValue::kCacheEntryRole or given in an optional template parameter. * FullTypedCacheInterface<TValue, TCreateContext> - Used for secondary cache compatible storage of objects of type TValue. In addition to BasicTypedCacheInterface constraints, we require TValue::ContentSlice() to return persistable data. This simplifies usage for the normal case of simple secondary cache compatibility (can give you a Slice to the data already in memory). In addition to TCreateContext performing the role of Cache::CreateContext, it is also expected to provide a factory function for creating TValue. * For each of these, there's a "Shared" version (e.g. FullTypedSharedCacheInterface) that holds a shared_ptr to the Cache, rather than assuming external ownership by holding only a raw `Cache*`. These interfaces introduce specific handle types for each interface instantiation, so that it's easy to see what kind of object is controlled by a handle. (Ultimately, this might not be worth the extra complexity, but it seems OK so far.) Note: I attempted to make the cache 'charge' automatically inferred from the cache object type, such as by expecting an ApproximateMemoryUsage() function, but this is not so clean because there are cases where we need to compute the charge ahead of time and don't want to re-compute it. ## block_cache.h This header is essentially the replacement for the old block_like_traits.h. It includes various things to support block cache access with typed_cache.h for block-based table. ## block_based_table_reader.cc Before this change, accessing the block cache here was an awkward mix of static polymorphism (template TBlocklike) and switch-case on a dynamic BlockType value. This change mostly unifies on static polymorphism, relying on minor hacks in block_cache.h to distinguish variants of Block. We still check BlockType in some places (especially for stats, which could be improved in follow-up work) but at least the BlockType is a static constant from the template parameter. (No more awkward partial redundancy between static and dynamic info.) This likely contributes to the overall performance improvement, but hasn't been tested in isolation. The other key source of simplification here is a more unified system of creating block cache objects: for directly populating from primary cache and for promotion from secondary cache. Both use BlockCreateContext, for context and for factory functions. ## block_based_table_builder.cc, cache_dump_load_impl.cc Before this change, warming caches was super ugly code. Both of these source files had switch statements to basically transition from the dynamic BlockType world to the static TBlocklike world. None of that mess is needed anymore as there's a new, untyped WarmInCache function that handles all the details just as promotion from SecondaryCache would. (Fixes `TODO akanksha: Dedup below code` in block_based_table_builder.cc.) ## Everything else Mostly just updating Cache users to use new typed APIs when reasonably possible, or changed Cache APIs when not. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10975 Test Plan: tests updated Performance test setup similar to https://github.com/facebook/rocksdb/issues/10626 (by cache size, LRUCache when not "hyper" for HyperClockCache): 34MB 1thread base.hyper -> kops/s: 0.745 io_bytes/op: 2.52504e+06 miss_ratio: 0.140906 max_rss_mb: 76.4844 34MB 1thread new.hyper -> kops/s: 0.751 io_bytes/op: 2.5123e+06 miss_ratio: 0.140161 max_rss_mb: 79.3594 34MB 1thread base -> kops/s: 0.254 io_bytes/op: 1.36073e+07 miss_ratio: 0.918818 max_rss_mb: 45.9297 34MB 1thread new -> kops/s: 0.252 io_bytes/op: 1.36157e+07 miss_ratio: 0.918999 max_rss_mb: 44.1523 34MB 32thread base.hyper -> kops/s: 7.272 io_bytes/op: 2.88323e+06 miss_ratio: 0.162532 max_rss_mb: 516.602 34MB 32thread new.hyper -> kops/s: 7.214 io_bytes/op: 2.99046e+06 miss_ratio: 0.168818 max_rss_mb: 518.293 34MB 32thread base -> kops/s: 3.528 io_bytes/op: 1.35722e+07 miss_ratio: 0.914691 max_rss_mb: 264.926 34MB 32thread new -> kops/s: 3.604 io_bytes/op: 1.35744e+07 miss_ratio: 0.915054 max_rss_mb: 264.488 233MB 1thread base.hyper -> kops/s: 53.909 io_bytes/op: 2552.35 miss_ratio: 0.0440566 max_rss_mb: 241.984 233MB 1thread new.hyper -> kops/s: 62.792 io_bytes/op: 2549.79 miss_ratio: 0.044043 max_rss_mb: 241.922 233MB 1thread base -> kops/s: 1.197 io_bytes/op: 2.75173e+06 miss_ratio: 0.103093 max_rss_mb: 241.559 233MB 1thread new -> kops/s: 1.199 io_bytes/op: 2.73723e+06 miss_ratio: 0.10305 max_rss_mb: 240.93 233MB 32thread base.hyper -> kops/s: 1298.69 io_bytes/op: 2539.12 miss_ratio: 0.0440307 max_rss_mb: 371.418 233MB 32thread new.hyper -> kops/s: 1421.35 io_bytes/op: 2538.75 miss_ratio: 0.0440307 max_rss_mb: 347.273 233MB 32thread base -> kops/s: 9.693 io_bytes/op: 2.77304e+06 miss_ratio: 0.103745 max_rss_mb: 569.691 233MB 32thread new -> kops/s: 9.75 io_bytes/op: 2.77559e+06 miss_ratio: 0.103798 max_rss_mb: 552.82 1597MB 1thread base.hyper -> kops/s: 58.607 io_bytes/op: 1449.14 miss_ratio: 0.0249324 max_rss_mb: 1583.55 1597MB 1thread new.hyper -> kops/s: 69.6 io_bytes/op: 1434.89 miss_ratio: 0.0247167 max_rss_mb: 1584.02 1597MB 1thread base -> kops/s: 60.478 io_bytes/op: 1421.28 miss_ratio: 0.024452 max_rss_mb: 1589.45 1597MB 1thread new -> kops/s: 63.973 io_bytes/op: 1416.07 miss_ratio: 0.0243766 max_rss_mb: 1589.24 1597MB 32thread base.hyper -> kops/s: 1436.2 io_bytes/op: 1357.93 miss_ratio: 0.0235353 max_rss_mb: 1692.92 1597MB 32thread new.hyper -> kops/s: 1605.03 io_bytes/op: 1358.04 miss_ratio: 0.023538 max_rss_mb: 1702.78 1597MB 32thread base -> kops/s: 280.059 io_bytes/op: 1350.34 miss_ratio: 0.023289 max_rss_mb: 1675.36 1597MB 32thread new -> kops/s: 283.125 io_bytes/op: 1351.05 miss_ratio: 0.0232797 max_rss_mb: 1703.83 Almost uniformly improving over base revision, especially for hot paths with HyperClockCache, up to 12% higher throughput seen (1597MB, 32thread, hyper). The improvement for that is likely coming from much simplified code for providing context for secondary cache promotion (CreateCallback/CreateContext), and possibly from less branching in block_based_table_reader. And likely a small improvement from not reconstituting key for DeleterFn. Reviewed By: anand1976 Differential Revision: D42417818 Pulled By: pdillinger fbshipit-source-id: f86bfdd584dce27c028b151ba56818ad14f7a432
2 years ago
BlobContentsCreator::Create(result, nullptr, value_slice, allocator);
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
return Status::OK();
}
UncompressionContext context(compression_type);
UncompressionInfo info(context, UncompressionDict::GetEmptyDict(),
compression_type);
size_t uncompressed_size = 0;
constexpr uint32_t compression_format_version = 2;
CacheAllocationPtr output;
{
PERF_TIMER_GUARD(blob_decompress_time);
StopWatch stop_watch(clock, statistics, BLOB_DB_DECOMPRESSION_MICROS);
output = UncompressData(info, value_slice.data(), value_slice.size(),
&uncompressed_size, compression_format_version,
allocator);
}
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
TEST_SYNC_POINT_CALLBACK(
"BlobFileReader::UncompressBlobIfNeeded:TamperWithResult", &output);
if (!output) {
return Status::Corruption("Unable to uncompress blob");
}
Major Cache refactoring, CPU efficiency improvement (#10975) Summary: This is several refactorings bundled into one to avoid having to incrementally re-modify uses of Cache several times. Overall, there are breaking changes to Cache class, and it becomes more of low-level interface for implementing caches, especially block cache. New internal APIs make using Cache cleaner than before, and more insulated from block cache evolution. Hopefully, this is the last really big block cache refactoring, because of rather effectively decoupling the implementations from the uses. This change also removes the EXPERIMENTAL designation on the SecondaryCache support in Cache. It seems reasonably mature at this point but still subject to change/evolution (as I warn in the API docs for Cache). The high-level motivation for this refactoring is to minimize code duplication / compounding complexity in adding SecondaryCache support to HyperClockCache (in a later PR). Other benefits listed below. * static_cast lines of code +29 -35 (net removed 6) * reinterpret_cast lines of code +6 -32 (net removed 26) ## cache.h and secondary_cache.h * Always use CacheItemHelper with entries instead of just a Deleter. There are several motivations / justifications: * Simpler for implementations to deal with just one Insert and one Lookup. * Simpler and more efficient implementation because we don't have to track which entries are using helpers and which are using deleters * Gets rid of hack to classify cache entries by their deleter. Instead, the CacheItemHelper includes a CacheEntryRole. This simplifies a lot of code (cache_entry_roles.h almost eliminated). Fixes https://github.com/facebook/rocksdb/issues/9428. * Makes it trivial to adjust SecondaryCache behavior based on kind of block (e.g. don't re-compress filter blocks). * It is arguably less convenient for many direct users of Cache, but direct users of Cache are now rare with introduction of typed_cache.h (below). * I considered and rejected an alternative approach in which we reduce customizability by assuming each secondary cache compatible value starts with a Slice referencing the uncompressed block contents (already true or mostly true), but we apparently intend to stack secondary caches. Saving an entry from a compressed secondary to a lower tier requires custom handling offered by SaveToCallback, etc. * Make CreateCallback part of the helper and introduce CreateContext to work with it (alternative to https://github.com/facebook/rocksdb/issues/10562). This cleans up the interface while still allowing context to be provided for loading/parsing values into primary cache. This model works for async lookup in BlockBasedTable reader (reader owns a CreateContext) under the assumption that it always waits on secondary cache operations to finish. (Otherwise, the CreateContext could be destroyed while async operation depending on it continues.) This likely contributes most to the observed performance improvement because it saves an std::function backed by a heap allocation. * Use char* for serialized data, e.g. in SaveToCallback, where void* was confusingly used. (We use `char*` for serialized byte data all over RocksDB, with many advantages over `void*`. `memcpy` etc. are legacy APIs that should not be mimicked.) * Add a type alias Cache::ObjectPtr = void*, so that we can better indicate the intent of the void* when it is to be the object associated with a Cache entry. Related: started (but did not complete) a refactoring to move away from "value" of a cache entry toward "object" or "obj". (It is confusing to call Cache a key-value store (like DB) when it is really storing arbitrary in-memory objects, not byte strings.) * Remove unnecessary key param from DeleterFn. This is good for efficiency in HyperClockCache, which does not directly store the cache key in memory. (Alternative to https://github.com/facebook/rocksdb/issues/10774) * Add allocator to Cache DeleterFn. This is a kind of future-proofing change in case we get more serious about using the Cache allocator for memory tracked by the Cache. Right now, only the uncompressed block contents are allocated using the allocator, and a pointer to that allocator is saved as part of the cached object so that the deleter can use it. (See CacheAllocationPtr.) If in the future we are able to "flatten out" our Cache objects some more, it would be good not to have to track the allocator as part of each object. * Removes legacy `ApplyToAllCacheEntries` and changes `ApplyToAllEntries` signature for Deleter->CacheItemHelper change. ## typed_cache.h Adds various "typed" interfaces to the Cache as internal APIs, so that most uses of Cache can use simple type safe code without casting and without explicit deleters, etc. Almost all of the non-test, non-glue code uses of Cache have been migrated. (Follow-up work: CompressedSecondaryCache deserves deeper attention to migrate.) This change expands RocksDB's internal usage of metaprogramming and SFINAE (https://en.cppreference.com/w/cpp/language/sfinae). The existing usages of Cache are divided up at a high level into these new interfaces. See updated existing uses of Cache for examples of how these are used. * PlaceholderCacheInterface - Used for making cache reservations, with entries that have a charge but no value. * BasicTypedCacheInterface<TValue> - Used for primary cache storage of objects of type TValue, which can be cleaned up with std::default_delete<TValue>. The role is provided by TValue::kCacheEntryRole or given in an optional template parameter. * FullTypedCacheInterface<TValue, TCreateContext> - Used for secondary cache compatible storage of objects of type TValue. In addition to BasicTypedCacheInterface constraints, we require TValue::ContentSlice() to return persistable data. This simplifies usage for the normal case of simple secondary cache compatibility (can give you a Slice to the data already in memory). In addition to TCreateContext performing the role of Cache::CreateContext, it is also expected to provide a factory function for creating TValue. * For each of these, there's a "Shared" version (e.g. FullTypedSharedCacheInterface) that holds a shared_ptr to the Cache, rather than assuming external ownership by holding only a raw `Cache*`. These interfaces introduce specific handle types for each interface instantiation, so that it's easy to see what kind of object is controlled by a handle. (Ultimately, this might not be worth the extra complexity, but it seems OK so far.) Note: I attempted to make the cache 'charge' automatically inferred from the cache object type, such as by expecting an ApproximateMemoryUsage() function, but this is not so clean because there are cases where we need to compute the charge ahead of time and don't want to re-compute it. ## block_cache.h This header is essentially the replacement for the old block_like_traits.h. It includes various things to support block cache access with typed_cache.h for block-based table. ## block_based_table_reader.cc Before this change, accessing the block cache here was an awkward mix of static polymorphism (template TBlocklike) and switch-case on a dynamic BlockType value. This change mostly unifies on static polymorphism, relying on minor hacks in block_cache.h to distinguish variants of Block. We still check BlockType in some places (especially for stats, which could be improved in follow-up work) but at least the BlockType is a static constant from the template parameter. (No more awkward partial redundancy between static and dynamic info.) This likely contributes to the overall performance improvement, but hasn't been tested in isolation. The other key source of simplification here is a more unified system of creating block cache objects: for directly populating from primary cache and for promotion from secondary cache. Both use BlockCreateContext, for context and for factory functions. ## block_based_table_builder.cc, cache_dump_load_impl.cc Before this change, warming caches was super ugly code. Both of these source files had switch statements to basically transition from the dynamic BlockType world to the static TBlocklike world. None of that mess is needed anymore as there's a new, untyped WarmInCache function that handles all the details just as promotion from SecondaryCache would. (Fixes `TODO akanksha: Dedup below code` in block_based_table_builder.cc.) ## Everything else Mostly just updating Cache users to use new typed APIs when reasonably possible, or changed Cache APIs when not. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10975 Test Plan: tests updated Performance test setup similar to https://github.com/facebook/rocksdb/issues/10626 (by cache size, LRUCache when not "hyper" for HyperClockCache): 34MB 1thread base.hyper -> kops/s: 0.745 io_bytes/op: 2.52504e+06 miss_ratio: 0.140906 max_rss_mb: 76.4844 34MB 1thread new.hyper -> kops/s: 0.751 io_bytes/op: 2.5123e+06 miss_ratio: 0.140161 max_rss_mb: 79.3594 34MB 1thread base -> kops/s: 0.254 io_bytes/op: 1.36073e+07 miss_ratio: 0.918818 max_rss_mb: 45.9297 34MB 1thread new -> kops/s: 0.252 io_bytes/op: 1.36157e+07 miss_ratio: 0.918999 max_rss_mb: 44.1523 34MB 32thread base.hyper -> kops/s: 7.272 io_bytes/op: 2.88323e+06 miss_ratio: 0.162532 max_rss_mb: 516.602 34MB 32thread new.hyper -> kops/s: 7.214 io_bytes/op: 2.99046e+06 miss_ratio: 0.168818 max_rss_mb: 518.293 34MB 32thread base -> kops/s: 3.528 io_bytes/op: 1.35722e+07 miss_ratio: 0.914691 max_rss_mb: 264.926 34MB 32thread new -> kops/s: 3.604 io_bytes/op: 1.35744e+07 miss_ratio: 0.915054 max_rss_mb: 264.488 233MB 1thread base.hyper -> kops/s: 53.909 io_bytes/op: 2552.35 miss_ratio: 0.0440566 max_rss_mb: 241.984 233MB 1thread new.hyper -> kops/s: 62.792 io_bytes/op: 2549.79 miss_ratio: 0.044043 max_rss_mb: 241.922 233MB 1thread base -> kops/s: 1.197 io_bytes/op: 2.75173e+06 miss_ratio: 0.103093 max_rss_mb: 241.559 233MB 1thread new -> kops/s: 1.199 io_bytes/op: 2.73723e+06 miss_ratio: 0.10305 max_rss_mb: 240.93 233MB 32thread base.hyper -> kops/s: 1298.69 io_bytes/op: 2539.12 miss_ratio: 0.0440307 max_rss_mb: 371.418 233MB 32thread new.hyper -> kops/s: 1421.35 io_bytes/op: 2538.75 miss_ratio: 0.0440307 max_rss_mb: 347.273 233MB 32thread base -> kops/s: 9.693 io_bytes/op: 2.77304e+06 miss_ratio: 0.103745 max_rss_mb: 569.691 233MB 32thread new -> kops/s: 9.75 io_bytes/op: 2.77559e+06 miss_ratio: 0.103798 max_rss_mb: 552.82 1597MB 1thread base.hyper -> kops/s: 58.607 io_bytes/op: 1449.14 miss_ratio: 0.0249324 max_rss_mb: 1583.55 1597MB 1thread new.hyper -> kops/s: 69.6 io_bytes/op: 1434.89 miss_ratio: 0.0247167 max_rss_mb: 1584.02 1597MB 1thread base -> kops/s: 60.478 io_bytes/op: 1421.28 miss_ratio: 0.024452 max_rss_mb: 1589.45 1597MB 1thread new -> kops/s: 63.973 io_bytes/op: 1416.07 miss_ratio: 0.0243766 max_rss_mb: 1589.24 1597MB 32thread base.hyper -> kops/s: 1436.2 io_bytes/op: 1357.93 miss_ratio: 0.0235353 max_rss_mb: 1692.92 1597MB 32thread new.hyper -> kops/s: 1605.03 io_bytes/op: 1358.04 miss_ratio: 0.023538 max_rss_mb: 1702.78 1597MB 32thread base -> kops/s: 280.059 io_bytes/op: 1350.34 miss_ratio: 0.023289 max_rss_mb: 1675.36 1597MB 32thread new -> kops/s: 283.125 io_bytes/op: 1351.05 miss_ratio: 0.0232797 max_rss_mb: 1703.83 Almost uniformly improving over base revision, especially for hot paths with HyperClockCache, up to 12% higher throughput seen (1597MB, 32thread, hyper). The improvement for that is likely coming from much simplified code for providing context for secondary cache promotion (CreateCallback/CreateContext), and possibly from less branching in block_based_table_reader. And likely a small improvement from not reconstituting key for DeleterFn. Reviewed By: anand1976 Differential Revision: D42417818 Pulled By: pdillinger fbshipit-source-id: f86bfdd584dce27c028b151ba56818ad14f7a432
2 years ago
result->reset(new BlobContents(std::move(output), uncompressed_size));
Introduce a blob file reader class (#7461) Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
return Status::OK();
}
} // namespace ROCKSDB_NAMESPACE