You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
rocksdb/table/block_based/block_test.cc

1656 lines
63 KiB

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
Improve / clean up meta block code & integrity (#9163) Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
3 years ago
#include "table/block_based/block.h"
#include <stdio.h>
Improve / clean up meta block code & integrity (#9163) Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
3 years ago
#include <algorithm>
#include <set>
#include <string>
#include <unordered_set>
#include <utility>
#include <vector>
Block per key-value checksum (#11287) Summary: add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are 1. checksum construction and verification in block.cc/h 2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h) 3. unit tests/crash test updates Tests: * Added unit tests * Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576` Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled. Performance: Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory. For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates): ``` SETUP make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench ./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none BENCHMARK ./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE The readrandom ops/sec looks like the following: Block cache size: 2GB 1.2GB * 0.9 1.2GB * 0.8 1.2GB * 0.5 8MB Main 240805 223604 198176 161653 139040 PR prot_bytes=0 238691 226693 200127 161082 141153 PR prot_bytes=1 214983 193199 178532 137013 108211 prot_bytes=1 vs -10% -15% -10.8% -15% -23% prot_bytes=0 ``` The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287 Reviewed By: ajkr Differential Revision: D43970708 Pulled By: cbi42 fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940
2 years ago
#include "db/db_test_util.h"
#include "db/dbformat.h"
#include "db/memtable.h"
#include "db/write_batch_internal.h"
#include "rocksdb/db.h"
#include "rocksdb/env.h"
#include "rocksdb/iterator.h"
#include "rocksdb/slice_transform.h"
#include "rocksdb/table.h"
Improve / clean up meta block code & integrity (#9163) Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
3 years ago
#include "table/block_based/block_based_table_reader.h"
#include "table/block_based/block_builder.h"
#include "table/format.h"
#include "test_util/testharness.h"
#include "test_util/testutil.h"
#include "util/random.h"
namespace ROCKSDB_NAMESPACE {
Separate internal and user key comparators in `BlockIter` (#6944) Summary: Replace `BlockIter::comparator_` and `IndexBlockIter::user_comparator_wrapper_` with a concrete `UserComparatorWrapper` and `InternalKeyComparator`. The motivation for this change was the inconvenience of not knowing the concrete type of `BlockIter::comparator_`, which prevented calling specialized internal key comparison functions to optimize comparison of keys with global seqno applied. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6944 Test Plan: benchmark setup -- single file DBs, in-memory, no compression. "normal_db" created by regular flush; "ingestion_db" created by ingesting a file. Both DBs have same contents. ``` $ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000 $ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}') $ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ ``` benchmark run command: ``` $ TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=$SEEK_NEXT -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=0 -threads=1 -reads=200000000 -mmap_read=1 -verify_checksum=false ``` results: perf improved marginally for ingestion_db and did not change significantly for normal_db: SEEK_NEXT | DB | code | ops/sec | % change -- | -- | -- | -- | -- 0 | normal_db | master | 350880 |   0 | normal_db | PR6944 | 351040 | 0.0 0 | ingestion_db | master | 343255 |   0 | ingestion_db | PR6944 | 349424 | 1.8 10 | normal_db | master | 218711 |   10 | normal_db | PR6944 | 217892 | -0.4 10 | ingestion_db | master | 220334 |   10 | ingestion_db | PR6944 | 226437 | 2.8 Reviewed By: pdillinger Differential Revision: D21924676 Pulled By: ajkr fbshipit-source-id: ea4288a2eefa8112eb6c651a671c1de18c12e538
4 years ago
std::string GenerateInternalKey(int primary_key, int secondary_key,
int padding_size, Random *rnd,
size_t ts_sz = 0) {
char buf[50];
char *p = &buf[0];
snprintf(buf, sizeof(buf), "%6d%4d", primary_key, secondary_key);
std::string k(p);
if (padding_size) {
k += rnd->RandomString(padding_size);
}
Separate internal and user key comparators in `BlockIter` (#6944) Summary: Replace `BlockIter::comparator_` and `IndexBlockIter::user_comparator_wrapper_` with a concrete `UserComparatorWrapper` and `InternalKeyComparator`. The motivation for this change was the inconvenience of not knowing the concrete type of `BlockIter::comparator_`, which prevented calling specialized internal key comparison functions to optimize comparison of keys with global seqno applied. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6944 Test Plan: benchmark setup -- single file DBs, in-memory, no compression. "normal_db" created by regular flush; "ingestion_db" created by ingesting a file. Both DBs have same contents. ``` $ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000 $ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}') $ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ ``` benchmark run command: ``` $ TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=$SEEK_NEXT -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=0 -threads=1 -reads=200000000 -mmap_read=1 -verify_checksum=false ``` results: perf improved marginally for ingestion_db and did not change significantly for normal_db: SEEK_NEXT | DB | code | ops/sec | % change -- | -- | -- | -- | -- 0 | normal_db | master | 350880 |   0 | normal_db | PR6944 | 351040 | 0.0 0 | ingestion_db | master | 343255 |   0 | ingestion_db | PR6944 | 349424 | 1.8 10 | normal_db | master | 218711 |   10 | normal_db | PR6944 | 217892 | -0.4 10 | ingestion_db | master | 220334 |   10 | ingestion_db | PR6944 | 226437 | 2.8 Reviewed By: pdillinger Differential Revision: D21924676 Pulled By: ajkr fbshipit-source-id: ea4288a2eefa8112eb6c651a671c1de18c12e538
4 years ago
AppendInternalKeyFooter(&k, 0 /* seqno */, kTypeValue);
std::string key_with_ts;
if (ts_sz > 0) {
PadInternalKeyWithMinTimestamp(&key_with_ts, k, ts_sz);
return key_with_ts;
}
return k;
}
// Generate random key value pairs.
// The generated key will be sorted. You can tune the parameters to generated
// different kinds of test key/value pairs for different scenario.
void GenerateRandomKVs(std::vector<std::string> *keys,
std::vector<std::string> *values, const int from,
const int len, const int step = 1,
const int padding_size = 0,
const int keys_share_prefix = 1, size_t ts_sz = 0) {
Random rnd(302);
// generate different prefix
for (int i = from; i < from + len; i += step) {
// generating keys that shares the prefix
for (int j = 0; j < keys_share_prefix; ++j) {
Separate internal and user key comparators in `BlockIter` (#6944) Summary: Replace `BlockIter::comparator_` and `IndexBlockIter::user_comparator_wrapper_` with a concrete `UserComparatorWrapper` and `InternalKeyComparator`. The motivation for this change was the inconvenience of not knowing the concrete type of `BlockIter::comparator_`, which prevented calling specialized internal key comparison functions to optimize comparison of keys with global seqno applied. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6944 Test Plan: benchmark setup -- single file DBs, in-memory, no compression. "normal_db" created by regular flush; "ingestion_db" created by ingesting a file. Both DBs have same contents. ``` $ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000 $ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}') $ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ ``` benchmark run command: ``` $ TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=$SEEK_NEXT -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=0 -threads=1 -reads=200000000 -mmap_read=1 -verify_checksum=false ``` results: perf improved marginally for ingestion_db and did not change significantly for normal_db: SEEK_NEXT | DB | code | ops/sec | % change -- | -- | -- | -- | -- 0 | normal_db | master | 350880 |   0 | normal_db | PR6944 | 351040 | 0.0 0 | ingestion_db | master | 343255 |   0 | ingestion_db | PR6944 | 349424 | 1.8 10 | normal_db | master | 218711 |   10 | normal_db | PR6944 | 217892 | -0.4 10 | ingestion_db | master | 220334 |   10 | ingestion_db | PR6944 | 226437 | 2.8 Reviewed By: pdillinger Differential Revision: D21924676 Pulled By: ajkr fbshipit-source-id: ea4288a2eefa8112eb6c651a671c1de18c12e538
4 years ago
// `DataBlockIter` assumes it reads only internal keys.
keys->emplace_back(GenerateInternalKey(i, j, padding_size, &rnd, ts_sz));
// 100 bytes values
values->emplace_back(rnd.RandomString(100));
}
}
}
class BlockTest : public testing::Test,
public testing::WithParamInterface<
std::tuple<bool, test::UserDefinedTimestampTestMode>> {
public:
bool keyUseDeltaEncoding() const { return std::get<0>(GetParam()); }
bool isUDTEnabled() const {
return test::IsUDTEnabled(std::get<1>(GetParam()));
}
bool shouldPersistUDT() const {
return test::ShouldPersistUDT(std::get<1>(GetParam()));
}
};
// block test
TEST_P(BlockTest, SimpleTest) {
Random rnd(301);
Options options = Options();
if (isUDTEnabled()) {
options.comparator = test::BytewiseComparatorWithU64TsWrapper();
}
size_t ts_sz = options.comparator->timestamp_size();
std::vector<std::string> keys;
std::vector<std::string> values;
BlockBuilder builder(16, keyUseDeltaEncoding(),
false /* use_value_delta_encoding */,
BlockBasedTableOptions::kDataBlockBinarySearch,
0.75 /* data_block_hash_table_util_ratio */, ts_sz,
shouldPersistUDT(), false /* is_user_key */);
int num_records = 100000;
GenerateRandomKVs(&keys, &values, 0, num_records, 1 /* step */,
0 /* padding_size */, 1 /* keys_share_prefix */, ts_sz);
// add a bunch of records to a block
for (int i = 0; i < num_records; i++) {
builder.Add(keys[i], values[i]);
}
// read serialized contents of the block
Slice rawblock = builder.Finish();
// create block reader
BlockContents contents;
contents.data = rawblock;
Block reader(std::move(contents));
// read contents of block sequentially
int count = 0;
InternalIterator *iter = reader.NewDataIterator(
options.comparator, kDisableGlobalSequenceNumber, nullptr /* iter */,
nullptr /* stats */, false /* block_contents_pinned */,
shouldPersistUDT());
for (iter->SeekToFirst(); iter->Valid(); count++, iter->Next()) {
// read kv from block
Slice k = iter->key();
Slice v = iter->value();
// compare with lookaside array
ASSERT_EQ(k.ToString().compare(keys[count]), 0);
ASSERT_EQ(v.ToString().compare(values[count]), 0);
}
delete iter;
// read block contents randomly
iter = reader.NewDataIterator(
options.comparator, kDisableGlobalSequenceNumber, nullptr /* iter */,
nullptr /* stats */, false /* block_contents_pinned */,
shouldPersistUDT());
for (int i = 0; i < num_records; i++) {
// find a random key in the lookaside array
int index = rnd.Uniform(num_records);
Slice k(keys[index]);
// search in block for this key
iter->Seek(k);
ASSERT_TRUE(iter->Valid());
Slice v = iter->value();
ASSERT_EQ(v.ToString().compare(values[index]), 0);
}
delete iter;
}
// return the block contents
BlockContents GetBlockContents(std::unique_ptr<BlockBuilder> *builder,
const std::vector<std::string> &keys,
const std::vector<std::string> &values,
bool key_use_delta_encoding, size_t ts_sz,
bool should_persist_udt,
const int /*prefix_group_size*/ = 1) {
builder->reset(
new BlockBuilder(1 /* restart interval */, key_use_delta_encoding,
false /* use_value_delta_encoding */,
BlockBasedTableOptions::kDataBlockBinarySearch,
0.75 /* data_block_hash_table_util_ratio */, ts_sz,
should_persist_udt, false /* is_user_key */));
// Add only half of the keys
for (size_t i = 0; i < keys.size(); ++i) {
(*builder)->Add(keys[i], values[i]);
}
Slice rawblock = (*builder)->Finish();
BlockContents contents;
contents.data = rawblock;
return contents;
}
void CheckBlockContents(BlockContents contents, const int max_key,
const std::vector<std::string> &keys,
const std::vector<std::string> &values,
bool is_udt_enabled, bool should_persist_udt) {
const size_t prefix_size = 6;
// create block reader
BlockContents contents_ref(contents.data);
Block reader1(std::move(contents));
Block reader2(std::move(contents_ref));
std::unique_ptr<const SliceTransform> prefix_extractor(
NewFixedPrefixTransform(prefix_size));
Separate internal and user key comparators in `BlockIter` (#6944) Summary: Replace `BlockIter::comparator_` and `IndexBlockIter::user_comparator_wrapper_` with a concrete `UserComparatorWrapper` and `InternalKeyComparator`. The motivation for this change was the inconvenience of not knowing the concrete type of `BlockIter::comparator_`, which prevented calling specialized internal key comparison functions to optimize comparison of keys with global seqno applied. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6944 Test Plan: benchmark setup -- single file DBs, in-memory, no compression. "normal_db" created by regular flush; "ingestion_db" created by ingesting a file. Both DBs have same contents. ``` $ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000 $ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}') $ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ ``` benchmark run command: ``` $ TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=$SEEK_NEXT -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=0 -threads=1 -reads=200000000 -mmap_read=1 -verify_checksum=false ``` results: perf improved marginally for ingestion_db and did not change significantly for normal_db: SEEK_NEXT | DB | code | ops/sec | % change -- | -- | -- | -- | -- 0 | normal_db | master | 350880 |   0 | normal_db | PR6944 | 351040 | 0.0 0 | ingestion_db | master | 343255 |   0 | ingestion_db | PR6944 | 349424 | 1.8 10 | normal_db | master | 218711 |   10 | normal_db | PR6944 | 217892 | -0.4 10 | ingestion_db | master | 220334 |   10 | ingestion_db | PR6944 | 226437 | 2.8 Reviewed By: pdillinger Differential Revision: D21924676 Pulled By: ajkr fbshipit-source-id: ea4288a2eefa8112eb6c651a671c1de18c12e538
4 years ago
std::unique_ptr<InternalIterator> regular_iter(reader2.NewDataIterator(
is_udt_enabled ? test::BytewiseComparatorWithU64TsWrapper()
: BytewiseComparator(),
kDisableGlobalSequenceNumber, nullptr /* iter */, nullptr /* stats */,
false /* block_contents_pinned */, should_persist_udt));
// Seek existent keys
for (size_t i = 0; i < keys.size(); i++) {
regular_iter->Seek(keys[i]);
ASSERT_OK(regular_iter->status());
ASSERT_TRUE(regular_iter->Valid());
Slice v = regular_iter->value();
ASSERT_EQ(v.ToString().compare(values[i]), 0);
}
// Seek non-existent keys.
// For hash index, if no key with a given prefix is not found, iterator will
// simply be set as invalid; whereas the binary search based iterator will
// return the one that is closest.
for (int i = 1; i < max_key - 1; i += 2) {
Separate internal and user key comparators in `BlockIter` (#6944) Summary: Replace `BlockIter::comparator_` and `IndexBlockIter::user_comparator_wrapper_` with a concrete `UserComparatorWrapper` and `InternalKeyComparator`. The motivation for this change was the inconvenience of not knowing the concrete type of `BlockIter::comparator_`, which prevented calling specialized internal key comparison functions to optimize comparison of keys with global seqno applied. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6944 Test Plan: benchmark setup -- single file DBs, in-memory, no compression. "normal_db" created by regular flush; "ingestion_db" created by ingesting a file. Both DBs have same contents. ``` $ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000 $ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}') $ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ ``` benchmark run command: ``` $ TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=$SEEK_NEXT -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=0 -threads=1 -reads=200000000 -mmap_read=1 -verify_checksum=false ``` results: perf improved marginally for ingestion_db and did not change significantly for normal_db: SEEK_NEXT | DB | code | ops/sec | % change -- | -- | -- | -- | -- 0 | normal_db | master | 350880 |   0 | normal_db | PR6944 | 351040 | 0.0 0 | ingestion_db | master | 343255 |   0 | ingestion_db | PR6944 | 349424 | 1.8 10 | normal_db | master | 218711 |   10 | normal_db | PR6944 | 217892 | -0.4 10 | ingestion_db | master | 220334 |   10 | ingestion_db | PR6944 | 226437 | 2.8 Reviewed By: pdillinger Differential Revision: D21924676 Pulled By: ajkr fbshipit-source-id: ea4288a2eefa8112eb6c651a671c1de18c12e538
4 years ago
// `DataBlockIter` assumes its APIs receive only internal keys.
auto key = GenerateInternalKey(i, 0, 0, nullptr,
is_udt_enabled ? 8 : 0 /* ts_sz */);
regular_iter->Seek(key);
ASSERT_TRUE(regular_iter->Valid());
}
}
// In this test case, no two key share same prefix.
TEST_P(BlockTest, SimpleIndexHash) {
const int kMaxKey = 100000;
size_t ts_sz = isUDTEnabled() ? 8 : 0;
std::vector<std::string> keys;
std::vector<std::string> values;
GenerateRandomKVs(&keys, &values, 0 /* first key id */,
kMaxKey /* last key id */, 2 /* step */,
8 /* padding size (8 bytes randomly generated suffix) */,
1 /* keys_share_prefix */, ts_sz);
std::unique_ptr<BlockBuilder> builder;
auto contents = GetBlockContents(
&builder, keys, values, keyUseDeltaEncoding(), ts_sz, shouldPersistUDT());
CheckBlockContents(std::move(contents), kMaxKey, keys, values, isUDTEnabled(),
shouldPersistUDT());
}
TEST_P(BlockTest, IndexHashWithSharedPrefix) {
const int kMaxKey = 100000;
// for each prefix, there will be 5 keys starts with it.
const int kPrefixGroup = 5;
size_t ts_sz = isUDTEnabled() ? 8 : 0;
std::vector<std::string> keys;
std::vector<std::string> values;
// Generate keys with same prefix.
GenerateRandomKVs(&keys, &values, 0, // first key id
kMaxKey, // last key id
2 /* step */,
10 /* padding size (8 bytes randomly generated suffix) */,
kPrefixGroup /* keys_share_prefix */, ts_sz);
std::unique_ptr<BlockBuilder> builder;
auto contents =
GetBlockContents(&builder, keys, values, keyUseDeltaEncoding(),
isUDTEnabled(), shouldPersistUDT(), kPrefixGroup);
CheckBlockContents(std::move(contents), kMaxKey, keys, values, isUDTEnabled(),
shouldPersistUDT());
}
// Param 0: key use delta encoding
// Param 1: user-defined timestamp test mode
INSTANTIATE_TEST_CASE_P(
P, BlockTest,
::testing::Combine(::testing::Bool(),
::testing::ValuesIn(test::GetUDTTestModes())));
// A slow and accurate version of BlockReadAmpBitmap that simply store
// all the marked ranges in a set.
class BlockReadAmpBitmapSlowAndAccurate {
public:
void Mark(size_t start_offset, size_t end_offset) {
assert(end_offset >= start_offset);
marked_ranges_.emplace(end_offset, start_offset);
}
void ResetCheckSequence() { iter_valid_ = false; }
// Return true if any byte in this range was Marked
// This does linear search from the previous position. When calling
// multiple times, `offset` needs to be incremental to get correct results.
// Call ResetCheckSequence() to reset it.
bool IsPinMarked(size_t offset) {
if (iter_valid_) {
// Has existing iterator, try linear search from
// the iterator.
for (int i = 0; i < 64; i++) {
if (offset < iter_->second) {
return false;
}
if (offset <= iter_->first) {
return true;
}
iter_++;
if (iter_ == marked_ranges_.end()) {
iter_valid_ = false;
return false;
}
}
}
// Initial call or have linear searched too many times.
// Do binary search.
iter_ = marked_ranges_.lower_bound(
std::make_pair(offset, static_cast<size_t>(0)));
if (iter_ == marked_ranges_.end()) {
iter_valid_ = false;
return false;
}
iter_valid_ = true;
return offset <= iter_->first && offset >= iter_->second;
}
private:
std::set<std::pair<size_t, size_t>> marked_ranges_;
std::set<std::pair<size_t, size_t>>::iterator iter_;
bool iter_valid_ = false;
};
TEST_F(BlockTest, BlockReadAmpBitmap) {
uint32_t pin_offset = 0;
SyncPoint::GetInstance()->SetCallBack(
"BlockReadAmpBitmap:rnd", [&pin_offset](void *arg) {
pin_offset = *(static_cast<uint32_t *>(arg));
});
SyncPoint::GetInstance()->EnableProcessing();
std::vector<size_t> block_sizes = {
1, // 1 byte
32, // 32 bytes
61, // 61 bytes
64, // 64 bytes
512, // 0.5 KB
1024, // 1 KB
1024 * 4, // 4 KB
1024 * 10, // 10 KB
1024 * 50, // 50 KB
1024 * 1024 * 4, // 5 MB
777,
124653,
};
const size_t kBytesPerBit = 64;
Random rnd(301);
for (size_t block_size : block_sizes) {
std::shared_ptr<Statistics> stats = ROCKSDB_NAMESPACE::CreateDBStatistics();
BlockReadAmpBitmap read_amp_bitmap(block_size, kBytesPerBit, stats.get());
BlockReadAmpBitmapSlowAndAccurate read_amp_slow_and_accurate;
size_t needed_bits = (block_size / kBytesPerBit);
if (block_size % kBytesPerBit != 0) {
needed_bits++;
}
ASSERT_EQ(stats->getTickerCount(READ_AMP_TOTAL_READ_BYTES), block_size);
// Generate some random entries
std::vector<size_t> random_entry_offsets;
for (int i = 0; i < 1000; i++) {
random_entry_offsets.push_back(rnd.Next() % block_size);
}
std::sort(random_entry_offsets.begin(), random_entry_offsets.end());
auto it =
std::unique(random_entry_offsets.begin(), random_entry_offsets.end());
random_entry_offsets.resize(
std::distance(random_entry_offsets.begin(), it));
std::vector<std::pair<size_t, size_t>> random_entries;
for (size_t i = 0; i < random_entry_offsets.size(); i++) {
size_t entry_start = random_entry_offsets[i];
size_t entry_end;
if (i + 1 < random_entry_offsets.size()) {
entry_end = random_entry_offsets[i + 1] - 1;
} else {
entry_end = block_size - 1;
}
random_entries.emplace_back(entry_start, entry_end);
}
for (size_t i = 0; i < random_entries.size(); i++) {
read_amp_slow_and_accurate.ResetCheckSequence();
auto &current_entry = random_entries[rnd.Next() % random_entries.size()];
read_amp_bitmap.Mark(static_cast<uint32_t>(current_entry.first),
static_cast<uint32_t>(current_entry.second));
read_amp_slow_and_accurate.Mark(current_entry.first,
current_entry.second);
size_t total_bits = 0;
for (size_t bit_idx = 0; bit_idx < needed_bits; bit_idx++) {
total_bits += read_amp_slow_and_accurate.IsPinMarked(
bit_idx * kBytesPerBit + pin_offset);
}
size_t expected_estimate_useful = total_bits * kBytesPerBit;
size_t got_estimate_useful =
stats->getTickerCount(READ_AMP_ESTIMATE_USEFUL_BYTES);
ASSERT_EQ(expected_estimate_useful, got_estimate_useful);
}
}
SyncPoint::GetInstance()->DisableProcessing();
SyncPoint::GetInstance()->ClearAllCallBacks();
}
TEST_F(BlockTest, BlockWithReadAmpBitmap) {
Random rnd(301);
Options options = Options();
std::vector<std::string> keys;
std::vector<std::string> values;
BlockBuilder builder(16);
int num_records = 10000;
GenerateRandomKVs(&keys, &values, 0, num_records, 1 /* step */);
// add a bunch of records to a block
for (int i = 0; i < num_records; i++) {
builder.Add(keys[i], values[i]);
}
Slice rawblock = builder.Finish();
const size_t kBytesPerBit = 8;
// Read the block sequentially using Next()
{
std::shared_ptr<Statistics> stats = ROCKSDB_NAMESPACE::CreateDBStatistics();
// create block reader
BlockContents contents;
contents.data = rawblock;
Block reader(std::move(contents), kBytesPerBit, stats.get());
// read contents of block sequentially
size_t read_bytes = 0;
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
DataBlockIter *iter = reader.NewDataIterator(
Separate internal and user key comparators in `BlockIter` (#6944) Summary: Replace `BlockIter::comparator_` and `IndexBlockIter::user_comparator_wrapper_` with a concrete `UserComparatorWrapper` and `InternalKeyComparator`. The motivation for this change was the inconvenience of not knowing the concrete type of `BlockIter::comparator_`, which prevented calling specialized internal key comparison functions to optimize comparison of keys with global seqno applied. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6944 Test Plan: benchmark setup -- single file DBs, in-memory, no compression. "normal_db" created by regular flush; "ingestion_db" created by ingesting a file. Both DBs have same contents. ``` $ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000 $ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}') $ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ ``` benchmark run command: ``` $ TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=$SEEK_NEXT -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=0 -threads=1 -reads=200000000 -mmap_read=1 -verify_checksum=false ``` results: perf improved marginally for ingestion_db and did not change significantly for normal_db: SEEK_NEXT | DB | code | ops/sec | % change -- | -- | -- | -- | -- 0 | normal_db | master | 350880 |   0 | normal_db | PR6944 | 351040 | 0.0 0 | ingestion_db | master | 343255 |   0 | ingestion_db | PR6944 | 349424 | 1.8 10 | normal_db | master | 218711 |   10 | normal_db | PR6944 | 217892 | -0.4 10 | ingestion_db | master | 220334 |   10 | ingestion_db | PR6944 | 226437 | 2.8 Reviewed By: pdillinger Differential Revision: D21924676 Pulled By: ajkr fbshipit-source-id: ea4288a2eefa8112eb6c651a671c1de18c12e538
4 years ago
options.comparator, kDisableGlobalSequenceNumber, nullptr, stats.get());
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {
iter->value();
read_bytes += iter->TEST_CurrentEntrySize();
double semi_acc_read_amp =
static_cast<double>(read_bytes) / rawblock.size();
double read_amp = static_cast<double>(stats->getTickerCount(
READ_AMP_ESTIMATE_USEFUL_BYTES)) /
stats->getTickerCount(READ_AMP_TOTAL_READ_BYTES);
// Error in read amplification will be less than 1% if we are reading
// sequentially
double error_pct = fabs(semi_acc_read_amp - read_amp) * 100;
EXPECT_LT(error_pct, 1);
}
delete iter;
}
// Read the block sequentially using Seek()
{
std::shared_ptr<Statistics> stats = ROCKSDB_NAMESPACE::CreateDBStatistics();
// create block reader
BlockContents contents;
contents.data = rawblock;
Block reader(std::move(contents), kBytesPerBit, stats.get());
size_t read_bytes = 0;
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
DataBlockIter *iter = reader.NewDataIterator(
Separate internal and user key comparators in `BlockIter` (#6944) Summary: Replace `BlockIter::comparator_` and `IndexBlockIter::user_comparator_wrapper_` with a concrete `UserComparatorWrapper` and `InternalKeyComparator`. The motivation for this change was the inconvenience of not knowing the concrete type of `BlockIter::comparator_`, which prevented calling specialized internal key comparison functions to optimize comparison of keys with global seqno applied. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6944 Test Plan: benchmark setup -- single file DBs, in-memory, no compression. "normal_db" created by regular flush; "ingestion_db" created by ingesting a file. Both DBs have same contents. ``` $ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000 $ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}') $ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ ``` benchmark run command: ``` $ TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=$SEEK_NEXT -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=0 -threads=1 -reads=200000000 -mmap_read=1 -verify_checksum=false ``` results: perf improved marginally for ingestion_db and did not change significantly for normal_db: SEEK_NEXT | DB | code | ops/sec | % change -- | -- | -- | -- | -- 0 | normal_db | master | 350880 |   0 | normal_db | PR6944 | 351040 | 0.0 0 | ingestion_db | master | 343255 |   0 | ingestion_db | PR6944 | 349424 | 1.8 10 | normal_db | master | 218711 |   10 | normal_db | PR6944 | 217892 | -0.4 10 | ingestion_db | master | 220334 |   10 | ingestion_db | PR6944 | 226437 | 2.8 Reviewed By: pdillinger Differential Revision: D21924676 Pulled By: ajkr fbshipit-source-id: ea4288a2eefa8112eb6c651a671c1de18c12e538
4 years ago
options.comparator, kDisableGlobalSequenceNumber, nullptr, stats.get());
for (int i = 0; i < num_records; i++) {
Slice k(keys[i]);
// search in block for this key
iter->Seek(k);
iter->value();
read_bytes += iter->TEST_CurrentEntrySize();
double semi_acc_read_amp =
static_cast<double>(read_bytes) / rawblock.size();
double read_amp = static_cast<double>(stats->getTickerCount(
READ_AMP_ESTIMATE_USEFUL_BYTES)) /
stats->getTickerCount(READ_AMP_TOTAL_READ_BYTES);
// Error in read amplification will be less than 1% if we are reading
// sequentially
double error_pct = fabs(semi_acc_read_amp - read_amp) * 100;
EXPECT_LT(error_pct, 1);
}
delete iter;
}
// Read the block randomly
{
std::shared_ptr<Statistics> stats = ROCKSDB_NAMESPACE::CreateDBStatistics();
// create block reader
BlockContents contents;
contents.data = rawblock;
Block reader(std::move(contents), kBytesPerBit, stats.get());
size_t read_bytes = 0;
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
DataBlockIter *iter = reader.NewDataIterator(
Separate internal and user key comparators in `BlockIter` (#6944) Summary: Replace `BlockIter::comparator_` and `IndexBlockIter::user_comparator_wrapper_` with a concrete `UserComparatorWrapper` and `InternalKeyComparator`. The motivation for this change was the inconvenience of not knowing the concrete type of `BlockIter::comparator_`, which prevented calling specialized internal key comparison functions to optimize comparison of keys with global seqno applied. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6944 Test Plan: benchmark setup -- single file DBs, in-memory, no compression. "normal_db" created by regular flush; "ingestion_db" created by ingesting a file. Both DBs have same contents. ``` $ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000 $ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}') $ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ ``` benchmark run command: ``` $ TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=$SEEK_NEXT -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=0 -threads=1 -reads=200000000 -mmap_read=1 -verify_checksum=false ``` results: perf improved marginally for ingestion_db and did not change significantly for normal_db: SEEK_NEXT | DB | code | ops/sec | % change -- | -- | -- | -- | -- 0 | normal_db | master | 350880 |   0 | normal_db | PR6944 | 351040 | 0.0 0 | ingestion_db | master | 343255 |   0 | ingestion_db | PR6944 | 349424 | 1.8 10 | normal_db | master | 218711 |   10 | normal_db | PR6944 | 217892 | -0.4 10 | ingestion_db | master | 220334 |   10 | ingestion_db | PR6944 | 226437 | 2.8 Reviewed By: pdillinger Differential Revision: D21924676 Pulled By: ajkr fbshipit-source-id: ea4288a2eefa8112eb6c651a671c1de18c12e538
4 years ago
options.comparator, kDisableGlobalSequenceNumber, nullptr, stats.get());
std::unordered_set<int> read_keys;
for (int i = 0; i < num_records; i++) {
int index = rnd.Uniform(num_records);
Slice k(keys[index]);
iter->Seek(k);
iter->value();
if (read_keys.find(index) == read_keys.end()) {
read_keys.insert(index);
read_bytes += iter->TEST_CurrentEntrySize();
}
double semi_acc_read_amp =
static_cast<double>(read_bytes) / rawblock.size();
double read_amp = static_cast<double>(stats->getTickerCount(
READ_AMP_ESTIMATE_USEFUL_BYTES)) /
stats->getTickerCount(READ_AMP_TOTAL_READ_BYTES);
double error_pct = fabs(semi_acc_read_amp - read_amp) * 100;
// Error in read amplification will be less than 2% if we are reading
// randomly
EXPECT_LT(error_pct, 2);
}
delete iter;
}
}
TEST_F(BlockTest, ReadAmpBitmapPow2) {
std::shared_ptr<Statistics> stats = ROCKSDB_NAMESPACE::CreateDBStatistics();
ASSERT_EQ(BlockReadAmpBitmap(100, 1, stats.get()).GetBytesPerBit(), 1u);
ASSERT_EQ(BlockReadAmpBitmap(100, 2, stats.get()).GetBytesPerBit(), 2u);
ASSERT_EQ(BlockReadAmpBitmap(100, 4, stats.get()).GetBytesPerBit(), 4u);
ASSERT_EQ(BlockReadAmpBitmap(100, 8, stats.get()).GetBytesPerBit(), 8u);
ASSERT_EQ(BlockReadAmpBitmap(100, 16, stats.get()).GetBytesPerBit(), 16u);
ASSERT_EQ(BlockReadAmpBitmap(100, 32, stats.get()).GetBytesPerBit(), 32u);
ASSERT_EQ(BlockReadAmpBitmap(100, 3, stats.get()).GetBytesPerBit(), 2u);
ASSERT_EQ(BlockReadAmpBitmap(100, 7, stats.get()).GetBytesPerBit(), 4u);
ASSERT_EQ(BlockReadAmpBitmap(100, 11, stats.get()).GetBytesPerBit(), 8u);
ASSERT_EQ(BlockReadAmpBitmap(100, 17, stats.get()).GetBytesPerBit(), 16u);
ASSERT_EQ(BlockReadAmpBitmap(100, 33, stats.get()).GetBytesPerBit(), 32u);
ASSERT_EQ(BlockReadAmpBitmap(100, 35, stats.get()).GetBytesPerBit(), 32u);
}
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
class IndexBlockTest
: public testing::Test,
public testing::WithParamInterface<
std::tuple<bool, bool, bool, test::UserDefinedTimestampTestMode>> {
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
public:
IndexBlockTest() = default;
bool keyIncludesSeq() const { return std::get<0>(GetParam()); }
bool useValueDeltaEncoding() const { return std::get<1>(GetParam()); }
bool includeFirstKey() const { return std::get<2>(GetParam()); }
bool isUDTEnabled() const {
return test::IsUDTEnabled(std::get<3>(GetParam()));
}
bool shouldPersistUDT() const {
return test::ShouldPersistUDT(std::get<3>(GetParam()));
}
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
};
// Similar to GenerateRandomKVs but for index block contents.
void GenerateRandomIndexEntries(std::vector<std::string> *separators,
std::vector<BlockHandle> *block_handles,
std::vector<std::string> *first_keys,
const int len, size_t ts_sz = 0,
bool zero_seqno = false) {
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
Random rnd(42);
// For each of `len` blocks, we need to generate a first and last key.
// Let's generate n*2 random keys, sort them, group into consecutive pairs.
std::set<std::string> keys;
while ((int)keys.size() < len * 2) {
// Keys need to be at least 8 bytes long to look like internal keys.
Block per key-value checksum (#11287) Summary: add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are 1. checksum construction and verification in block.cc/h 2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h) 3. unit tests/crash test updates Tests: * Added unit tests * Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576` Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled. Performance: Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory. For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates): ``` SETUP make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench ./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none BENCHMARK ./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE The readrandom ops/sec looks like the following: Block cache size: 2GB 1.2GB * 0.9 1.2GB * 0.8 1.2GB * 0.5 8MB Main 240805 223604 198176 161653 139040 PR prot_bytes=0 238691 226693 200127 161082 141153 PR prot_bytes=1 214983 193199 178532 137013 108211 prot_bytes=1 vs -10% -15% -10.8% -15% -23% prot_bytes=0 ``` The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287 Reviewed By: ajkr Differential Revision: D43970708 Pulled By: cbi42 fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940
2 years ago
std::string new_key = test::RandomKey(&rnd, 12);
if (zero_seqno) {
AppendInternalKeyFooter(&new_key, 0 /* seqno */, kTypeValue);
}
if (ts_sz > 0) {
std::string key;
PadInternalKeyWithMinTimestamp(&key, new_key, ts_sz);
keys.insert(std::move(key));
} else {
keys.insert(std::move(new_key));
}
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
}
uint64_t offset = 0;
for (auto it = keys.begin(); it != keys.end();) {
first_keys->emplace_back(*it++);
separators->emplace_back(*it++);
uint64_t size = rnd.Uniform(1024 * 16);
BlockHandle handle(offset, size);
Improve / clean up meta block code & integrity (#9163) Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
3 years ago
offset += size + BlockBasedTable::kBlockTrailerSize;
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
block_handles->emplace_back(handle);
}
}
TEST_P(IndexBlockTest, IndexValueEncodingTest) {
Random rnd(301);
Options options = Options();
if (isUDTEnabled()) {
options.comparator = test::BytewiseComparatorWithU64TsWrapper();
}
size_t ts_sz = options.comparator->timestamp_size();
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
std::vector<std::string> separators;
std::vector<BlockHandle> block_handles;
std::vector<std::string> first_keys;
const bool kUseDeltaEncoding = true;
BlockBuilder builder(16, kUseDeltaEncoding, useValueDeltaEncoding(),
BlockBasedTableOptions::kDataBlockBinarySearch,
0.75 /* data_block_hash_table_util_ratio */, ts_sz,
shouldPersistUDT(), !keyIncludesSeq());
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
int num_records = 100;
GenerateRandomIndexEntries(&separators, &block_handles, &first_keys,
num_records, ts_sz, false /* zero_seqno */);
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
BlockHandle last_encoded_handle;
for (int i = 0; i < num_records; i++) {
std::string first_key_to_persist_buf;
Slice first_internal_key = first_keys[i];
if (ts_sz > 0 && !shouldPersistUDT()) {
StripTimestampFromInternalKey(&first_key_to_persist_buf, first_keys[i],
ts_sz);
first_internal_key = first_key_to_persist_buf;
}
IndexValue entry(block_handles[i], first_internal_key);
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
std::string encoded_entry;
std::string delta_encoded_entry;
entry.EncodeTo(&encoded_entry, includeFirstKey(), nullptr);
if (useValueDeltaEncoding() && i > 0) {
entry.EncodeTo(&delta_encoded_entry, includeFirstKey(),
&last_encoded_handle);
}
last_encoded_handle = entry.handle;
const Slice delta_encoded_entry_slice(delta_encoded_entry);
if (keyIncludesSeq()) {
builder.Add(separators[i], encoded_entry, &delta_encoded_entry_slice);
} else {
const Slice user_key = ExtractUserKey(separators[i]);
builder.Add(user_key, encoded_entry, &delta_encoded_entry_slice);
}
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
}
// read serialized contents of the block
Slice rawblock = builder.Finish();
// create block reader
BlockContents contents;
contents.data = rawblock;
Block reader(std::move(contents));
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
const bool kTotalOrderSeek = true;
IndexBlockIter *kNullIter = nullptr;
Statistics *kNullStats = nullptr;
// read contents of block sequentially
InternalIteratorBase<IndexValue> *iter = reader.NewIndexIterator(
Separate internal and user key comparators in `BlockIter` (#6944) Summary: Replace `BlockIter::comparator_` and `IndexBlockIter::user_comparator_wrapper_` with a concrete `UserComparatorWrapper` and `InternalKeyComparator`. The motivation for this change was the inconvenience of not knowing the concrete type of `BlockIter::comparator_`, which prevented calling specialized internal key comparison functions to optimize comparison of keys with global seqno applied. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6944 Test Plan: benchmark setup -- single file DBs, in-memory, no compression. "normal_db" created by regular flush; "ingestion_db" created by ingesting a file. Both DBs have same contents. ``` $ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000 $ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}') $ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ ``` benchmark run command: ``` $ TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=$SEEK_NEXT -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=0 -threads=1 -reads=200000000 -mmap_read=1 -verify_checksum=false ``` results: perf improved marginally for ingestion_db and did not change significantly for normal_db: SEEK_NEXT | DB | code | ops/sec | % change -- | -- | -- | -- | -- 0 | normal_db | master | 350880 |   0 | normal_db | PR6944 | 351040 | 0.0 0 | ingestion_db | master | 343255 |   0 | ingestion_db | PR6944 | 349424 | 1.8 10 | normal_db | master | 218711 |   10 | normal_db | PR6944 | 217892 | -0.4 10 | ingestion_db | master | 220334 |   10 | ingestion_db | PR6944 | 226437 | 2.8 Reviewed By: pdillinger Differential Revision: D21924676 Pulled By: ajkr fbshipit-source-id: ea4288a2eefa8112eb6c651a671c1de18c12e538
4 years ago
options.comparator, kDisableGlobalSequenceNumber, kNullIter, kNullStats,
kTotalOrderSeek, includeFirstKey(), keyIncludesSeq(),
!useValueDeltaEncoding(), false /* block_contents_pinned */,
shouldPersistUDT());
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
iter->SeekToFirst();
for (int index = 0; index < num_records; ++index) {
ASSERT_TRUE(iter->Valid());
Slice k = iter->key();
IndexValue v = iter->value();
if (keyIncludesSeq()) {
EXPECT_EQ(separators[index], k.ToString());
} else {
const Slice user_key = ExtractUserKey(separators[index]);
EXPECT_EQ(user_key, k);
}
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
EXPECT_EQ(block_handles[index].offset(), v.handle.offset());
EXPECT_EQ(block_handles[index].size(), v.handle.size());
EXPECT_EQ(includeFirstKey() ? first_keys[index] : "",
v.first_internal_key.ToString());
iter->Next();
}
delete iter;
// read block contents randomly
Separate internal and user key comparators in `BlockIter` (#6944) Summary: Replace `BlockIter::comparator_` and `IndexBlockIter::user_comparator_wrapper_` with a concrete `UserComparatorWrapper` and `InternalKeyComparator`. The motivation for this change was the inconvenience of not knowing the concrete type of `BlockIter::comparator_`, which prevented calling specialized internal key comparison functions to optimize comparison of keys with global seqno applied. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6944 Test Plan: benchmark setup -- single file DBs, in-memory, no compression. "normal_db" created by regular flush; "ingestion_db" created by ingesting a file. Both DBs have same contents. ``` $ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000 $ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}') $ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ ``` benchmark run command: ``` $ TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=$SEEK_NEXT -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=0 -threads=1 -reads=200000000 -mmap_read=1 -verify_checksum=false ``` results: perf improved marginally for ingestion_db and did not change significantly for normal_db: SEEK_NEXT | DB | code | ops/sec | % change -- | -- | -- | -- | -- 0 | normal_db | master | 350880 |   0 | normal_db | PR6944 | 351040 | 0.0 0 | ingestion_db | master | 343255 |   0 | ingestion_db | PR6944 | 349424 | 1.8 10 | normal_db | master | 218711 |   10 | normal_db | PR6944 | 217892 | -0.4 10 | ingestion_db | master | 220334 |   10 | ingestion_db | PR6944 | 226437 | 2.8 Reviewed By: pdillinger Differential Revision: D21924676 Pulled By: ajkr fbshipit-source-id: ea4288a2eefa8112eb6c651a671c1de18c12e538
4 years ago
iter = reader.NewIndexIterator(
options.comparator, kDisableGlobalSequenceNumber, kNullIter, kNullStats,
kTotalOrderSeek, includeFirstKey(), keyIncludesSeq(),
!useValueDeltaEncoding(), false /* block_contents_pinned */,
shouldPersistUDT());
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
for (int i = 0; i < num_records * 2; i++) {
// find a random key in the lookaside array
int index = rnd.Uniform(num_records);
Slice k(separators[index]);
// search in block for this key
iter->Seek(k);
ASSERT_TRUE(iter->Valid());
IndexValue v = iter->value();
if (keyIncludesSeq()) {
EXPECT_EQ(separators[index], iter->key().ToString());
} else {
const Slice user_key = ExtractUserKey(separators[index]);
EXPECT_EQ(user_key, iter->key());
}
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
EXPECT_EQ(block_handles[index].offset(), v.handle.offset());
EXPECT_EQ(block_handles[index].size(), v.handle.size());
EXPECT_EQ(includeFirstKey() ? first_keys[index] : "",
v.first_internal_key.ToString());
}
delete iter;
}
// Param 0: key includes sequence number (whether to use user key or internal
// key as key entry in index block).
// Param 1: use value delta encoding
// Param 2: include first key
// Param 3: user-defined timestamp test mode
INSTANTIATE_TEST_CASE_P(
P, IndexBlockTest,
::testing::Combine(::testing::Bool(), ::testing::Bool(), ::testing::Bool(),
::testing::ValuesIn(test::GetUDTTestModes())));
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
Block per key-value checksum (#11287) Summary: add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are 1. checksum construction and verification in block.cc/h 2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h) 3. unit tests/crash test updates Tests: * Added unit tests * Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576` Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled. Performance: Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory. For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates): ``` SETUP make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench ./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none BENCHMARK ./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE The readrandom ops/sec looks like the following: Block cache size: 2GB 1.2GB * 0.9 1.2GB * 0.8 1.2GB * 0.5 8MB Main 240805 223604 198176 161653 139040 PR prot_bytes=0 238691 226693 200127 161082 141153 PR prot_bytes=1 214983 193199 178532 137013 108211 prot_bytes=1 vs -10% -15% -10.8% -15% -23% prot_bytes=0 ``` The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287 Reviewed By: ajkr Differential Revision: D43970708 Pulled By: cbi42 fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940
2 years ago
class BlockPerKVChecksumTest : public DBTestBase {
public:
BlockPerKVChecksumTest()
: DBTestBase("block_per_kv_checksum", /*env_do_fsync=*/false) {}
template <typename TBlockIter>
void TestIterateForward(std::unique_ptr<TBlockIter> &biter,
size_t &verification_count) {
while (biter->Valid()) {
verification_count = 0;
biter->Next();
if (biter->Valid()) {
ASSERT_GE(verification_count, 1);
}
}
}
template <typename TBlockIter>
void TestIterateBackward(std::unique_ptr<TBlockIter> &biter,
size_t &verification_count) {
while (biter->Valid()) {
verification_count = 0;
biter->Prev();
if (biter->Valid()) {
ASSERT_GE(verification_count, 1);
}
}
}
template <typename TBlockIter>
void TestSeekToFirst(std::unique_ptr<TBlockIter> &biter,
size_t &verification_count) {
verification_count = 0;
biter->SeekToFirst();
ASSERT_GE(verification_count, 1);
TestIterateForward(biter, verification_count);
}
template <typename TBlockIter>
void TestSeekToLast(std::unique_ptr<TBlockIter> &biter,
size_t &verification_count) {
verification_count = 0;
biter->SeekToLast();
ASSERT_GE(verification_count, 1);
TestIterateBackward(biter, verification_count);
}
template <typename TBlockIter>
void TestSeekForPrev(std::unique_ptr<TBlockIter> &biter,
size_t &verification_count, std::string k) {
verification_count = 0;
biter->SeekForPrev(k);
ASSERT_GE(verification_count, 1);
TestIterateBackward(biter, verification_count);
}
template <typename TBlockIter>
void TestSeek(std::unique_ptr<TBlockIter> &biter, size_t &verification_count,
std::string k) {
verification_count = 0;
biter->Seek(k);
ASSERT_GE(verification_count, 1);
TestIterateForward(biter, verification_count);
}
bool VerifyChecksum(uint32_t checksum_len, const char *checksum_ptr,
const Slice &key, const Slice &val) {
if (!checksum_len) {
return checksum_ptr == nullptr;
}
return ProtectionInfo64().ProtectKV(key, val).Verify(
static_cast<uint8_t>(checksum_len), checksum_ptr);
}
};
TEST_F(BlockPerKVChecksumTest, EmptyBlock) {
// Tests that empty block code path is not broken by per kv checksum.
BlockBuilder builder(
16 /* block_restart_interval */, true /* use_delta_encoding */,
false /* use_value_delta_encoding */,
BlockBasedTableOptions::DataBlockIndexType::kDataBlockBinarySearch);
Slice raw_block = builder.Finish();
BlockContents contents;
contents.data = raw_block;
std::unique_ptr<Block_kData> data_block;
Options options = Options();
BlockBasedTableOptions tbo;
uint8_t protection_bytes_per_key = 8;
BlockCreateContext create_context{
&tbo, nullptr /* statistics */, false /* using_zstd */,
protection_bytes_per_key, options.comparator};
create_context.Create(&data_block, std::move(contents));
std::unique_ptr<DataBlockIter> biter{data_block->NewDataIterator(
options.comparator, kDisableGlobalSequenceNumber)};
biter->SeekToFirst();
ASSERT_FALSE(biter->Valid());
ASSERT_OK(biter->status());
Random rnd(33);
biter->SeekForGet(GenerateInternalKey(1, 1, 10, &rnd));
ASSERT_FALSE(biter->Valid());
ASSERT_OK(biter->status());
biter->SeekToLast();
ASSERT_FALSE(biter->Valid());
ASSERT_OK(biter->status());
biter->Seek(GenerateInternalKey(1, 1, 10, &rnd));
ASSERT_FALSE(biter->Valid());
ASSERT_OK(biter->status());
biter->SeekForPrev(GenerateInternalKey(1, 1, 10, &rnd));
ASSERT_FALSE(biter->Valid());
ASSERT_OK(biter->status());
}
TEST_F(BlockPerKVChecksumTest, UnsupportedOptionValue) {
Options options = Options();
options.block_protection_bytes_per_key = 128;
Destroy(options);
ASSERT_TRUE(TryReopen(options).IsNotSupported());
}
TEST_F(BlockPerKVChecksumTest, InitializeProtectionInfo) {
// Make sure that the checksum construction code path does not break
// when the block is itself already corrupted.
Options options = Options();
BlockBasedTableOptions tbo;
uint8_t protection_bytes_per_key = 8;
BlockCreateContext create_context{
&tbo, nullptr /* statistics */, false /* using_zstd */,
protection_bytes_per_key, options.comparator};
{
std::string invalid_content = "1";
Slice raw_block = invalid_content;
BlockContents contents;
contents.data = raw_block;
std::unique_ptr<Block_kData> data_block;
create_context.Create(&data_block, std::move(contents));
std::unique_ptr<DataBlockIter> iter{data_block->NewDataIterator(
options.comparator, kDisableGlobalSequenceNumber)};
ASSERT_TRUE(iter->status().IsCorruption());
}
{
std::string invalid_content = "1";
Slice raw_block = invalid_content;
BlockContents contents;
contents.data = raw_block;
std::unique_ptr<Block_kIndex> index_block;
create_context.Create(&index_block, std::move(contents));
std::unique_ptr<IndexBlockIter> iter{index_block->NewIndexIterator(
options.comparator, kDisableGlobalSequenceNumber, nullptr, nullptr,
true, false, true, true)};
ASSERT_TRUE(iter->status().IsCorruption());
}
{
std::string invalid_content = "1";
Slice raw_block = invalid_content;
BlockContents contents;
contents.data = raw_block;
std::unique_ptr<Block_kMetaIndex> meta_block;
create_context.Create(&meta_block, std::move(contents));
std::unique_ptr<MetaBlockIter> iter{meta_block->NewMetaIterator(true)};
ASSERT_TRUE(iter->status().IsCorruption());
}
}
TEST_F(BlockPerKVChecksumTest, ApproximateMemory) {
// Tests that ApproximateMemoryUsage() includes memory used by block kv
// checksum.
const int kNumRecords = 20;
std::vector<std::string> keys;
std::vector<std::string> values;
GenerateRandomKVs(&keys, &values, 0, kNumRecords, 1 /* step */,
24 /* padding_size */);
std::unique_ptr<BlockBuilder> builder;
auto generate_block_content = [&]() {
builder = std::make_unique<BlockBuilder>(16 /* restart_interval */);
for (int i = 0; i < kNumRecords; ++i) {
builder->Add(keys[i], values[i]);
}
Slice raw_block = builder->Finish();
BlockContents contents;
contents.data = raw_block;
return contents;
};
Options options = Options();
BlockBasedTableOptions tbo;
uint8_t protection_bytes_per_key = 8;
BlockCreateContext with_checksum_create_context{
&tbo,
nullptr /* statistics */,
false /* using_zstd */,
protection_bytes_per_key,
options.comparator,
true /* index_value_is_full */};
BlockCreateContext create_context{
&tbo, nullptr /* statistics */, false /* using_zstd */,
0, options.comparator, true /* index_value_is_full */};
{
std::unique_ptr<Block_kData> data_block;
create_context.Create(&data_block, generate_block_content());
size_t block_memory = data_block->ApproximateMemoryUsage();
std::unique_ptr<Block_kData> with_checksum_data_block;
with_checksum_create_context.Create(&with_checksum_data_block,
generate_block_content());
ASSERT_GT(with_checksum_data_block->ApproximateMemoryUsage() - block_memory,
100);
}
{
std::unique_ptr<Block_kData> meta_block;
create_context.Create(&meta_block, generate_block_content());
size_t block_memory = meta_block->ApproximateMemoryUsage();
std::unique_ptr<Block_kData> with_checksum_meta_block;
with_checksum_create_context.Create(&with_checksum_meta_block,
generate_block_content());
// Rough comparison to avoid flaky test due to memory allocation alignment.
ASSERT_GT(with_checksum_meta_block->ApproximateMemoryUsage() - block_memory,
100);
}
{
// Index block has different contents.
std::vector<std::string> separators;
std::vector<BlockHandle> block_handles;
std::vector<std::string> first_keys;
GenerateRandomIndexEntries(&separators, &block_handles, &first_keys,
kNumRecords);
auto generate_index_content = [&]() {
builder = std::make_unique<BlockBuilder>(16 /* restart_interval */);
BlockHandle last_encoded_handle;
for (int i = 0; i < kNumRecords; ++i) {
IndexValue entry(block_handles[i], first_keys[i]);
std::string encoded_entry;
std::string delta_encoded_entry;
entry.EncodeTo(&encoded_entry, false, nullptr);
last_encoded_handle = entry.handle;
const Slice delta_encoded_entry_slice(delta_encoded_entry);
builder->Add(separators[i], encoded_entry, &delta_encoded_entry_slice);
}
Slice raw_block = builder->Finish();
BlockContents contents;
contents.data = raw_block;
return contents;
};
std::unique_ptr<Block_kIndex> index_block;
create_context.Create(&index_block, generate_index_content());
size_t block_memory = index_block->ApproximateMemoryUsage();
std::unique_ptr<Block_kIndex> with_checksum_index_block;
with_checksum_create_context.Create(&with_checksum_index_block,
generate_index_content());
ASSERT_GT(
with_checksum_index_block->ApproximateMemoryUsage() - block_memory,
100);
}
}
std::string GetDataBlockIndexTypeStr(
BlockBasedTableOptions::DataBlockIndexType t) {
return t == BlockBasedTableOptions::DataBlockIndexType::kDataBlockBinarySearch
? "BinarySearch"
: "BinaryAndHash";
}
class DataBlockKVChecksumTest
: public BlockPerKVChecksumTest,
public testing::WithParamInterface<std::tuple<
BlockBasedTableOptions::DataBlockIndexType,
uint8_t /* block_protection_bytes_per_key */,
uint32_t /* restart_interval*/, bool /* use_delta_encoding */>> {
public:
DataBlockKVChecksumTest() = default;
BlockBasedTableOptions::DataBlockIndexType GetDataBlockIndexType() const {
return std::get<0>(GetParam());
}
uint8_t GetChecksumLen() const { return std::get<1>(GetParam()); }
uint32_t GetRestartInterval() const { return std::get<2>(GetParam()); }
bool GetUseDeltaEncoding() const { return std::get<3>(GetParam()); }
std::unique_ptr<Block_kData> GenerateDataBlock(
std::vector<std::string> &keys, std::vector<std::string> &values,
int num_record) {
BlockBasedTableOptions tbo;
BlockCreateContext create_context{&tbo, nullptr /* statistics */,
false /* using_zstd */, GetChecksumLen(),
Options().comparator};
builder_ = std::make_unique<BlockBuilder>(
static_cast<int>(GetRestartInterval()),
GetUseDeltaEncoding() /* use_delta_encoding */,
false /* use_value_delta_encoding */, GetDataBlockIndexType());
for (int i = 0; i < num_record; i++) {
builder_->Add(keys[i], values[i]);
}
Slice raw_block = builder_->Finish();
BlockContents contents;
contents.data = raw_block;
std::unique_ptr<Block_kData> data_block;
create_context.Create(&data_block, std::move(contents));
return data_block;
}
std::unique_ptr<BlockBuilder> builder_;
};
INSTANTIATE_TEST_CASE_P(
P, DataBlockKVChecksumTest,
::testing::Combine(
::testing::Values(
BlockBasedTableOptions::DataBlockIndexType::kDataBlockBinarySearch,
BlockBasedTableOptions::DataBlockIndexType::
kDataBlockBinaryAndHash),
::testing::Values(0, 1, 2, 4, 8) /* protection_bytes_per_key */,
::testing::Values(1, 2, 3, 8, 16) /* restart_interval */,
::testing::Values(false, true)) /* delta_encoding */,
[](const testing::TestParamInfo<std::tuple<
BlockBasedTableOptions::DataBlockIndexType, uint8_t, uint32_t, bool>>
&args) {
std::ostringstream oss;
oss << GetDataBlockIndexTypeStr(std::get<0>(args.param))
<< "ProtectionPerKey" << std::to_string(std::get<1>(args.param))
<< "RestartInterval" << std::to_string(std::get<2>(args.param))
<< "DeltaEncode" << std::to_string(std::get<3>(args.param));
return oss.str();
});
TEST_P(DataBlockKVChecksumTest, ChecksumConstructionAndVerification) {
uint8_t protection_bytes_per_key = GetChecksumLen();
std::vector<int> num_restart_intervals = {1, 16};
for (const auto num_restart_interval : num_restart_intervals) {
const int kNumRecords =
num_restart_interval * static_cast<int>(GetRestartInterval());
std::vector<std::string> keys;
std::vector<std::string> values;
GenerateRandomKVs(&keys, &values, 0, kNumRecords + 1, 1 /* step */,
24 /* padding_size */);
SyncPoint::GetInstance()->DisableProcessing();
std::unique_ptr<Block_kData> data_block =
GenerateDataBlock(keys, values, kNumRecords);
const char *checksum_ptr = data_block->TEST_GetKVChecksum();
// Check checksum of correct length is generated
for (int i = 0; i < kNumRecords; i++) {
ASSERT_TRUE(VerifyChecksum(protection_bytes_per_key,
checksum_ptr + i * protection_bytes_per_key,
keys[i], values[i]));
}
std::vector<SequenceNumber> seqnos{kDisableGlobalSequenceNumber, 0};
// Could just use a boolean flag. Use a counter here just to keep open the
// possibility of checking the exact number of verifications in the future.
size_t verification_count = 0;
// The SyncPoint is placed before checking checksum_len == 0 in
// Block::VerifyChecksum(). So verification count is incremented even with
// protection_bytes_per_key = 0. No actual checksum computation is done in
// that case (see Block::VerifyChecksum()).
SyncPoint::GetInstance()->SetCallBack(
"Block::VerifyChecksum::checksum_len",
[&verification_count, protection_bytes_per_key](void *checksum_len) {
ASSERT_EQ((*static_cast<uint8_t *>(checksum_len)),
protection_bytes_per_key);
++verification_count;
});
SyncPoint::GetInstance()->EnableProcessing();
for (const auto seqno : seqnos) {
std::unique_ptr<DataBlockIter> biter{
data_block->NewDataIterator(Options().comparator, seqno)};
// SeekForGet() some key that does not exist
biter->SeekForGet(keys[kNumRecords]);
TestIterateForward(biter, verification_count);
verification_count = 0;
biter->SeekForGet(keys[kNumRecords / 2]);
ASSERT_GE(verification_count, 1);
TestIterateForward(biter, verification_count);
TestSeekToFirst(biter, verification_count);
TestSeekToLast(biter, verification_count);
TestSeekForPrev(biter, verification_count, keys[kNumRecords / 2]);
TestSeek(biter, verification_count, keys[kNumRecords / 2]);
}
}
}
class IndexBlockKVChecksumTest
: public BlockPerKVChecksumTest,
public testing::WithParamInterface<
std::tuple<BlockBasedTableOptions::DataBlockIndexType, uint8_t,
uint32_t, bool, bool>> {
public:
IndexBlockKVChecksumTest() = default;
BlockBasedTableOptions::DataBlockIndexType GetDataBlockIndexType() const {
return std::get<0>(GetParam());
}
uint8_t GetChecksumLen() const { return std::get<1>(GetParam()); }
uint32_t GetRestartInterval() const { return std::get<2>(GetParam()); }
bool UseValueDeltaEncoding() const { return std::get<3>(GetParam()); }
bool IncludeFirstKey() const { return std::get<4>(GetParam()); }
std::unique_ptr<Block_kIndex> GenerateIndexBlock(
std::vector<std::string> &separators,
std::vector<BlockHandle> &block_handles,
std::vector<std::string> &first_keys, int num_record) {
Options options = Options();
BlockBasedTableOptions tbo;
uint8_t protection_bytes_per_key = GetChecksumLen();
BlockCreateContext create_context{
&tbo,
nullptr /* statistics */,
false /* _using_zstd */,
protection_bytes_per_key,
options.comparator,
!UseValueDeltaEncoding() /* value_is_full */,
IncludeFirstKey()};
builder_ = std::make_unique<BlockBuilder>(
static_cast<int>(GetRestartInterval()), true /* use_delta_encoding */,
UseValueDeltaEncoding() /* use_value_delta_encoding */,
GetDataBlockIndexType());
BlockHandle last_encoded_handle;
for (int i = 0; i < num_record; i++) {
IndexValue entry(block_handles[i], first_keys[i]);
std::string encoded_entry;
std::string delta_encoded_entry;
entry.EncodeTo(&encoded_entry, IncludeFirstKey(), nullptr);
if (UseValueDeltaEncoding() && i > 0) {
entry.EncodeTo(&delta_encoded_entry, IncludeFirstKey(),
&last_encoded_handle);
}
last_encoded_handle = entry.handle;
const Slice delta_encoded_entry_slice(delta_encoded_entry);
builder_->Add(separators[i], encoded_entry, &delta_encoded_entry_slice);
}
// read serialized contents of the block
Slice raw_block = builder_->Finish();
// create block reader
BlockContents contents;
contents.data = raw_block;
std::unique_ptr<Block_kIndex> index_block;
create_context.Create(&index_block, std::move(contents));
return index_block;
}
std::unique_ptr<BlockBuilder> builder_;
};
INSTANTIATE_TEST_CASE_P(
P, IndexBlockKVChecksumTest,
::testing::Combine(
::testing::Values(
BlockBasedTableOptions::DataBlockIndexType::kDataBlockBinarySearch,
BlockBasedTableOptions::DataBlockIndexType::
kDataBlockBinaryAndHash),
::testing::Values(0, 1, 2, 4, 8), ::testing::Values(1, 3, 8, 16),
::testing::Values(true, false), ::testing::Values(true, false)),
[](const testing::TestParamInfo<
std::tuple<BlockBasedTableOptions::DataBlockIndexType, uint8_t,
uint32_t, bool, bool>> &args) {
std::ostringstream oss;
oss << GetDataBlockIndexTypeStr(std::get<0>(args.param)) << "ProtBytes"
<< std::to_string(std::get<1>(args.param)) << "RestartInterval"
<< std::to_string(std::get<2>(args.param)) << "ValueDeltaEncode"
<< std::to_string(std::get<3>(args.param)) << "IncludeFirstKey"
<< std::to_string(std::get<4>(args.param));
return oss.str();
});
TEST_P(IndexBlockKVChecksumTest, ChecksumConstructionAndVerification) {
Options options = Options();
uint8_t protection_bytes_per_key = GetChecksumLen();
std::vector<int> num_restart_intervals = {1, 16};
std::vector<SequenceNumber> seqnos{kDisableGlobalSequenceNumber, 10001};
for (const auto num_restart_interval : num_restart_intervals) {
const int kNumRecords =
num_restart_interval * static_cast<int>(GetRestartInterval());
for (const auto seqno : seqnos) {
std::vector<std::string> separators;
std::vector<BlockHandle> block_handles;
std::vector<std::string> first_keys;
GenerateRandomIndexEntries(&separators, &block_handles, &first_keys,
kNumRecords, 0 /* ts_sz */,
Block per key-value checksum (#11287) Summary: add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are 1. checksum construction and verification in block.cc/h 2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h) 3. unit tests/crash test updates Tests: * Added unit tests * Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576` Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled. Performance: Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory. For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates): ``` SETUP make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench ./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none BENCHMARK ./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE The readrandom ops/sec looks like the following: Block cache size: 2GB 1.2GB * 0.9 1.2GB * 0.8 1.2GB * 0.5 8MB Main 240805 223604 198176 161653 139040 PR prot_bytes=0 238691 226693 200127 161082 141153 PR prot_bytes=1 214983 193199 178532 137013 108211 prot_bytes=1 vs -10% -15% -10.8% -15% -23% prot_bytes=0 ``` The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287 Reviewed By: ajkr Differential Revision: D43970708 Pulled By: cbi42 fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940
2 years ago
seqno != kDisableGlobalSequenceNumber);
SyncPoint::GetInstance()->DisableProcessing();
std::unique_ptr<Block_kIndex> index_block = GenerateIndexBlock(
separators, block_handles, first_keys, kNumRecords);
IndexBlockIter *kNullIter = nullptr;
Statistics *kNullStats = nullptr;
// read contents of block sequentially
std::unique_ptr<IndexBlockIter> biter{index_block->NewIndexIterator(
options.comparator, seqno, kNullIter, kNullStats,
true /* total_order_seek */, IncludeFirstKey() /* have_first_key */,
true /* key_includes_seq */,
!UseValueDeltaEncoding() /* value_is_full */,
true /* block_contents_pinned*/,
true /* user_defined_timestamps_persisted */,
nullptr /* prefix_index */)};
Block per key-value checksum (#11287) Summary: add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are 1. checksum construction and verification in block.cc/h 2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h) 3. unit tests/crash test updates Tests: * Added unit tests * Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576` Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled. Performance: Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory. For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates): ``` SETUP make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench ./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none BENCHMARK ./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE The readrandom ops/sec looks like the following: Block cache size: 2GB 1.2GB * 0.9 1.2GB * 0.8 1.2GB * 0.5 8MB Main 240805 223604 198176 161653 139040 PR prot_bytes=0 238691 226693 200127 161082 141153 PR prot_bytes=1 214983 193199 178532 137013 108211 prot_bytes=1 vs -10% -15% -10.8% -15% -23% prot_bytes=0 ``` The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287 Reviewed By: ajkr Differential Revision: D43970708 Pulled By: cbi42 fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940
2 years ago
biter->SeekToFirst();
const char *checksum_ptr = index_block->TEST_GetKVChecksum();
// Check checksum of correct length is generated
for (int i = 0; i < kNumRecords; i++) {
// Obtaining the actual content written as value to index block is not
// trivial: delta-encoded value is only persisted when not at block
// restart point and that keys share some byte (see more in
// BlockBuilder::AddWithLastKeyImpl()). So here we just do verification
// using value from iterator unlike tests for DataBlockIter or
// MetaBlockIter.
ASSERT_TRUE(VerifyChecksum(protection_bytes_per_key, checksum_ptr,
biter->key(), biter->raw_value()));
}
size_t verification_count = 0;
// The SyncPoint is placed before checking checksum_len == 0 in
// Block::VerifyChecksum(). To make the testing code below simpler and not
// having to differentiate 0 vs non-0 checksum_len, we do an explicit
// assert checking on checksum_len here.
SyncPoint::GetInstance()->SetCallBack(
"Block::VerifyChecksum::checksum_len",
[&verification_count, protection_bytes_per_key](void *checksum_len) {
ASSERT_EQ((*static_cast<uint8_t *>(checksum_len)),
protection_bytes_per_key);
++verification_count;
});
SyncPoint::GetInstance()->EnableProcessing();
TestSeekToFirst(biter, verification_count);
TestSeekToLast(biter, verification_count);
TestSeek(biter, verification_count, first_keys[kNumRecords / 2]);
}
}
}
class MetaIndexBlockKVChecksumTest
: public BlockPerKVChecksumTest,
public testing::WithParamInterface<
uint8_t /* block_protection_bytes_per_key */> {
public:
MetaIndexBlockKVChecksumTest() = default;
uint8_t GetChecksumLen() const { return GetParam(); }
uint32_t GetRestartInterval() const { return 1; }
std::unique_ptr<Block_kMetaIndex> GenerateMetaIndexBlock(
std::vector<std::string> &keys, std::vector<std::string> &values,
int num_record) {
Options options = Options();
BlockBasedTableOptions tbo;
uint8_t protection_bytes_per_key = GetChecksumLen();
BlockCreateContext create_context{
&tbo, nullptr /* statistics */, false /* using_zstd */,
protection_bytes_per_key, options.comparator};
builder_ =
std::make_unique<BlockBuilder>(static_cast<int>(GetRestartInterval()));
// add a bunch of records to a block
for (int i = 0; i < num_record; i++) {
builder_->Add(keys[i], values[i]);
}
Slice raw_block = builder_->Finish();
BlockContents contents;
contents.data = raw_block;
std::unique_ptr<Block_kMetaIndex> meta_block;
create_context.Create(&meta_block, std::move(contents));
return meta_block;
}
std::unique_ptr<BlockBuilder> builder_;
};
INSTANTIATE_TEST_CASE_P(P, MetaIndexBlockKVChecksumTest,
::testing::Values(0, 1, 2, 4, 8),
[](const testing::TestParamInfo<uint8_t> &args) {
std::ostringstream oss;
oss << "ProtBytes" << std::to_string(args.param);
return oss.str();
});
TEST_P(MetaIndexBlockKVChecksumTest, ChecksumConstructionAndVerification) {
Options options = Options();
BlockBasedTableOptions tbo;
uint8_t protection_bytes_per_key = GetChecksumLen();
BlockCreateContext create_context{
&tbo, nullptr /* statistics */, false /* using_zstd */,
protection_bytes_per_key, options.comparator};
std::vector<int> num_restart_intervals = {1, 16};
for (const auto num_restart_interval : num_restart_intervals) {
const int kNumRecords = num_restart_interval * GetRestartInterval();
std::vector<std::string> keys;
std::vector<std::string> values;
GenerateRandomKVs(&keys, &values, 0, kNumRecords + 1, 1 /* step */,
24 /* padding_size */);
SyncPoint::GetInstance()->DisableProcessing();
std::unique_ptr<Block_kMetaIndex> meta_block =
GenerateMetaIndexBlock(keys, values, kNumRecords);
const char *checksum_ptr = meta_block->TEST_GetKVChecksum();
// Check checksum of correct length is generated
for (int i = 0; i < kNumRecords; i++) {
ASSERT_TRUE(VerifyChecksum(protection_bytes_per_key,
checksum_ptr + i * protection_bytes_per_key,
keys[i], values[i]));
}
size_t verification_count = 0;
// The SyncPoint is placed before checking checksum_len == 0 in
// Block::VerifyChecksum(). To make the testing code below simpler and not
// having to differentiate 0 vs non-0 checksum_len, we do an explicit assert
// checking on checksum_len here.
SyncPoint::GetInstance()->SetCallBack(
"Block::VerifyChecksum::checksum_len",
[&verification_count, protection_bytes_per_key](void *checksum_len) {
ASSERT_EQ((*static_cast<uint8_t *>(checksum_len)),
protection_bytes_per_key);
++verification_count;
});
SyncPoint::GetInstance()->EnableProcessing();
// Check that block iterator does checksum verification
std::unique_ptr<MetaBlockIter> biter{
meta_block->NewMetaIterator(true /* block_contents_pinned */)};
TestSeekToFirst(biter, verification_count);
TestSeekToLast(biter, verification_count);
TestSeek(biter, verification_count, keys[kNumRecords / 2]);
TestSeekForPrev(biter, verification_count, keys[kNumRecords / 2]);
}
}
class DataBlockKVChecksumCorruptionTest : public DataBlockKVChecksumTest {
public:
DataBlockKVChecksumCorruptionTest() = default;
std::unique_ptr<DataBlockIter> GenerateDataBlockIter(
std::vector<std::string> &keys, std::vector<std::string> &values,
int num_record) {
// During Block construction, we may create block iter to initialize per kv
// checksum. Disable syncpoint that may be created for block iter methods.
SyncPoint::GetInstance()->DisableProcessing();
block_ = GenerateDataBlock(keys, values, num_record);
std::unique_ptr<DataBlockIter> biter{block_->NewDataIterator(
Options().comparator, kDisableGlobalSequenceNumber)};
SyncPoint::GetInstance()->EnableProcessing();
return biter;
}
protected:
std::unique_ptr<Block_kData> block_;
};
TEST_P(DataBlockKVChecksumCorruptionTest, CorruptEntry) {
std::vector<int> num_restart_intervals = {1, 3};
for (const auto num_restart_interval : num_restart_intervals) {
const int kNumRecords =
num_restart_interval * static_cast<int>(GetRestartInterval());
std::vector<std::string> keys;
std::vector<std::string> values;
GenerateRandomKVs(&keys, &values, 0, kNumRecords + 1, 1 /* step */,
24 /* padding_size */);
SyncPoint::GetInstance()->SetCallBack(
"BlockIter::UpdateKey::value", [](void *arg) {
char *value = static_cast<char *>(arg);
// values generated by GenerateRandomKVs are of length 100
++value[10];
});
// Purely for reducing the number of lines of code.
typedef std::unique_ptr<DataBlockIter> IterPtr;
typedef void(IterAPI)(IterPtr & iter, std::string &);
std::string seek_key = keys[kNumRecords / 2];
auto test_seek = [&](IterAPI iter_api) {
IterPtr biter = GenerateDataBlockIter(keys, values, kNumRecords);
ASSERT_OK(biter->status());
iter_api(biter, seek_key);
ASSERT_FALSE(biter->Valid());
ASSERT_TRUE(biter->status().IsCorruption());
};
test_seek([](IterPtr &iter, std::string &) { iter->SeekToFirst(); });
test_seek([](IterPtr &iter, std::string &) { iter->SeekToLast(); });
test_seek([](IterPtr &iter, std::string &k) { iter->Seek(k); });
test_seek([](IterPtr &iter, std::string &k) { iter->SeekForPrev(k); });
test_seek([](IterPtr &iter, std::string &k) { iter->SeekForGet(k); });
typedef void (DataBlockIter::*IterStepAPI)();
auto test_step = [&](IterStepAPI iter_api, std::string &k) {
IterPtr biter = GenerateDataBlockIter(keys, values, kNumRecords);
SyncPoint::GetInstance()->DisableProcessing();
biter->Seek(k);
ASSERT_TRUE(biter->Valid());
ASSERT_OK(biter->status());
SyncPoint::GetInstance()->EnableProcessing();
std::invoke(iter_api, biter);
ASSERT_FALSE(biter->Valid());
ASSERT_TRUE(biter->status().IsCorruption());
};
if (kNumRecords > 1) {
test_step(&DataBlockIter::Prev, seek_key);
test_step(&DataBlockIter::Next, seek_key);
}
}
}
INSTANTIATE_TEST_CASE_P(
P, DataBlockKVChecksumCorruptionTest,
::testing::Combine(
::testing::Values(
BlockBasedTableOptions::DataBlockIndexType::kDataBlockBinarySearch,
BlockBasedTableOptions::DataBlockIndexType::
kDataBlockBinaryAndHash),
::testing::Values(4, 8) /* block_protection_bytes_per_key */,
::testing::Values(1, 3, 8, 16) /* restart_interval */,
::testing::Values(false, true)),
[](const testing::TestParamInfo<std::tuple<
BlockBasedTableOptions::DataBlockIndexType, uint8_t, uint32_t, bool>>
&args) {
std::ostringstream oss;
oss << GetDataBlockIndexTypeStr(std::get<0>(args.param)) << "ProtBytes"
<< std::to_string(std::get<1>(args.param)) << "RestartInterval"
<< std::to_string(std::get<2>(args.param)) << "DeltaEncode"
<< std::to_string(std::get<3>(args.param));
return oss.str();
});
class IndexBlockKVChecksumCorruptionTest : public IndexBlockKVChecksumTest {
public:
IndexBlockKVChecksumCorruptionTest() = default;
std::unique_ptr<IndexBlockIter> GenerateIndexBlockIter(
std::vector<std::string> &separators,
std::vector<BlockHandle> &block_handles,
std::vector<std::string> &first_keys, int num_record,
SequenceNumber seqno) {
SyncPoint::GetInstance()->DisableProcessing();
block_ =
GenerateIndexBlock(separators, block_handles, first_keys, num_record);
std::unique_ptr<IndexBlockIter> biter{block_->NewIndexIterator(
Options().comparator, seqno, nullptr, nullptr,
true /* total_order_seek */, IncludeFirstKey() /* have_first_key */,
true /* key_includes_seq */,
!UseValueDeltaEncoding() /* value_is_full */,
true /* block_contents_pinned */,
true /* user_defined_timestamps_persisted */,
nullptr /* prefix_index */)};
Block per key-value checksum (#11287) Summary: add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are 1. checksum construction and verification in block.cc/h 2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h) 3. unit tests/crash test updates Tests: * Added unit tests * Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576` Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled. Performance: Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory. For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates): ``` SETUP make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench ./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none BENCHMARK ./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE The readrandom ops/sec looks like the following: Block cache size: 2GB 1.2GB * 0.9 1.2GB * 0.8 1.2GB * 0.5 8MB Main 240805 223604 198176 161653 139040 PR prot_bytes=0 238691 226693 200127 161082 141153 PR prot_bytes=1 214983 193199 178532 137013 108211 prot_bytes=1 vs -10% -15% -10.8% -15% -23% prot_bytes=0 ``` The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287 Reviewed By: ajkr Differential Revision: D43970708 Pulled By: cbi42 fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940
2 years ago
SyncPoint::GetInstance()->EnableProcessing();
return biter;
}
protected:
std::unique_ptr<Block_kIndex> block_;
};
INSTANTIATE_TEST_CASE_P(
P, IndexBlockKVChecksumCorruptionTest,
::testing::Combine(
::testing::Values(
BlockBasedTableOptions::DataBlockIndexType::kDataBlockBinarySearch,
BlockBasedTableOptions::DataBlockIndexType::
kDataBlockBinaryAndHash),
::testing::Values(4, 8) /* block_protection_bytes_per_key */,
::testing::Values(1, 3, 8, 16) /* restart_interval */,
::testing::Values(true, false), ::testing::Values(true, false)),
[](const testing::TestParamInfo<
std::tuple<BlockBasedTableOptions::DataBlockIndexType, uint8_t,
uint32_t, bool, bool>> &args) {
std::ostringstream oss;
oss << GetDataBlockIndexTypeStr(std::get<0>(args.param)) << "ProtBytes"
<< std::to_string(std::get<1>(args.param)) << "RestartInterval"
<< std::to_string(std::get<2>(args.param)) << "ValueDeltaEncode"
<< std::to_string(std::get<3>(args.param)) << "IncludeFirstKey"
<< std::to_string(std::get<4>(args.param));
return oss.str();
});
TEST_P(IndexBlockKVChecksumCorruptionTest, CorruptEntry) {
std::vector<int> num_restart_intervals = {1, 3};
std::vector<SequenceNumber> seqnos{kDisableGlobalSequenceNumber, 10001};
for (const auto num_restart_interval : num_restart_intervals) {
const int kNumRecords =
num_restart_interval * static_cast<int>(GetRestartInterval());
for (const auto seqno : seqnos) {
std::vector<std::string> separators;
std::vector<BlockHandle> block_handles;
std::vector<std::string> first_keys;
GenerateRandomIndexEntries(&separators, &block_handles, &first_keys,
kNumRecords, 0 /* ts_sz */,
Block per key-value checksum (#11287) Summary: add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are 1. checksum construction and verification in block.cc/h 2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h) 3. unit tests/crash test updates Tests: * Added unit tests * Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576` Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled. Performance: Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory. For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates): ``` SETUP make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench ./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none BENCHMARK ./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE The readrandom ops/sec looks like the following: Block cache size: 2GB 1.2GB * 0.9 1.2GB * 0.8 1.2GB * 0.5 8MB Main 240805 223604 198176 161653 139040 PR prot_bytes=0 238691 226693 200127 161082 141153 PR prot_bytes=1 214983 193199 178532 137013 108211 prot_bytes=1 vs -10% -15% -10.8% -15% -23% prot_bytes=0 ``` The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287 Reviewed By: ajkr Differential Revision: D43970708 Pulled By: cbi42 fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940
2 years ago
seqno != kDisableGlobalSequenceNumber);
SyncPoint::GetInstance()->SetCallBack(
"BlockIter::UpdateKey::value", [](void *arg) {
char *value = static_cast<char *>(arg);
// value can be delta-encoded with different lengths, so we corrupt
// first bytes here to be safe
++value[0];
});
typedef std::unique_ptr<IndexBlockIter> IterPtr;
typedef void(IterAPI)(IterPtr & iter, std::string &);
std::string seek_key = first_keys[kNumRecords / 2];
auto test_seek = [&](IterAPI iter_api) {
std::unique_ptr<IndexBlockIter> biter = GenerateIndexBlockIter(
separators, block_handles, first_keys, kNumRecords, seqno);
ASSERT_OK(biter->status());
iter_api(biter, seek_key);
ASSERT_FALSE(biter->Valid());
ASSERT_TRUE(biter->status().IsCorruption());
};
test_seek([](IterPtr &iter, std::string &) { iter->SeekToFirst(); });
test_seek([](IterPtr &iter, std::string &) { iter->SeekToLast(); });
test_seek([](IterPtr &iter, std::string &k) { iter->Seek(k); });
typedef void (IndexBlockIter::*IterStepAPI)();
auto test_step = [&](IterStepAPI iter_api, std::string &k) {
std::unique_ptr<IndexBlockIter> biter = GenerateIndexBlockIter(
separators, block_handles, first_keys, kNumRecords, seqno);
SyncPoint::GetInstance()->DisableProcessing();
biter->Seek(k);
ASSERT_TRUE(biter->Valid());
ASSERT_OK(biter->status());
SyncPoint::GetInstance()->EnableProcessing();
std::invoke(iter_api, biter);
ASSERT_FALSE(biter->Valid());
ASSERT_TRUE(biter->status().IsCorruption());
};
if (kNumRecords > 1) {
test_step(&IndexBlockIter::Prev, seek_key);
test_step(&IndexBlockIter::Next, seek_key);
}
}
}
}
class MetaIndexBlockKVChecksumCorruptionTest
: public MetaIndexBlockKVChecksumTest {
public:
MetaIndexBlockKVChecksumCorruptionTest() = default;
std::unique_ptr<MetaBlockIter> GenerateMetaIndexBlockIter(
std::vector<std::string> &keys, std::vector<std::string> &values,
int num_record) {
SyncPoint::GetInstance()->DisableProcessing();
block_ = GenerateMetaIndexBlock(keys, values, num_record);
std::unique_ptr<MetaBlockIter> biter{
block_->NewMetaIterator(true /* block_contents_pinned */)};
SyncPoint::GetInstance()->EnableProcessing();
return biter;
}
protected:
std::unique_ptr<Block_kMetaIndex> block_;
};
INSTANTIATE_TEST_CASE_P(
P, MetaIndexBlockKVChecksumCorruptionTest,
::testing::Values(4, 8) /* block_protection_bytes_per_key */,
[](const testing::TestParamInfo<uint8_t> &args) {
std::ostringstream oss;
oss << "ProtBytes" << std::to_string(args.param);
return oss.str();
});
TEST_P(MetaIndexBlockKVChecksumCorruptionTest, CorruptEntry) {
Options options = Options();
std::vector<int> num_restart_intervals = {1, 3};
for (const auto num_restart_interval : num_restart_intervals) {
const int kNumRecords =
num_restart_interval * static_cast<int>(GetRestartInterval());
std::vector<std::string> keys;
std::vector<std::string> values;
GenerateRandomKVs(&keys, &values, 0, kNumRecords + 1, 1 /* step */,
24 /* padding_size */);
SyncPoint::GetInstance()->SetCallBack(
"BlockIter::UpdateKey::value", [](void *arg) {
char *value = static_cast<char *>(arg);
// values generated by GenerateRandomKVs are of length 100
++value[10];
});
typedef std::unique_ptr<MetaBlockIter> IterPtr;
typedef void(IterAPI)(IterPtr & iter, std::string &);
typedef void (MetaBlockIter::*IterStepAPI)();
std::string seek_key = keys[kNumRecords / 2];
auto test_seek = [&](IterAPI iter_api) {
IterPtr biter = GenerateMetaIndexBlockIter(keys, values, kNumRecords);
ASSERT_OK(biter->status());
iter_api(biter, seek_key);
ASSERT_FALSE(biter->Valid());
ASSERT_TRUE(biter->status().IsCorruption());
};
test_seek([](IterPtr &iter, std::string &) { iter->SeekToFirst(); });
test_seek([](IterPtr &iter, std::string &) { iter->SeekToLast(); });
test_seek([](IterPtr &iter, std::string &k) { iter->Seek(k); });
test_seek([](IterPtr &iter, std::string &k) { iter->SeekForPrev(k); });
auto test_step = [&](IterStepAPI iter_api, const std::string &k) {
IterPtr biter = GenerateMetaIndexBlockIter(keys, values, kNumRecords);
SyncPoint::GetInstance()->DisableProcessing();
biter->Seek(k);
ASSERT_TRUE(biter->Valid());
ASSERT_OK(biter->status());
SyncPoint::GetInstance()->EnableProcessing();
std::invoke(iter_api, biter);
ASSERT_FALSE(biter->Valid());
ASSERT_TRUE(biter->status().IsCorruption());
};
if (kNumRecords > 1) {
test_step(&MetaBlockIter::Prev, seek_key);
test_step(&MetaBlockIter::Next, seek_key);
}
}
}
} // namespace ROCKSDB_NAMESPACE
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
10 years ago
int main(int argc, char **argv) {
ROCKSDB_NAMESPACE::port::InstallStackTraceHandler();
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
10 years ago
::testing::InitGoogleTest(&argc, argv);
return RUN_ALL_TESTS();
}