You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
rocksdb/db/db_impl/db_impl_debug.cc

321 lines
9.3 KiB

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
#ifndef NDEBUG
#include "db/column_family.h"
#include "db/db_impl/db_impl.h"
#include "db/error_handler.h"
#include "db/periodic_work_scheduler.h"
#include "monitoring/thread_status_updater.h"
#include "util/cast_util.h"
namespace ROCKSDB_NAMESPACE {
uint64_t DBImpl::TEST_GetLevel0TotalSize() {
InstrumentedMutexLock l(&mutex_);
return default_cf_handle_->cfd()->current()->storage_info()->NumLevelBytes(0);
}
Status DBImpl::TEST_SwitchWAL() {
WriteContext write_context;
InstrumentedMutexLock l(&mutex_);
void* writer = TEST_BeginWrite();
auto s = SwitchWAL(&write_context);
TEST_EndWrite(writer);
return s;
}
Expose DB methods to lock and unlock the WAL (#5146) Summary: Expose DB methods to lock and unlock the WAL. These methods are intended to use by MyRocks in order to obtain WAL coordinates in consistent way. Usage scenario is following: MySQL has performance_schema.log_status which provides information that enables a backup tool to copy the required log files without locking for the duration of copy. To populate this table MySQL does following: 1. Lock the binary log. Transactions are not allowed to commit now 2. Save the binary log coordinates 3. Walk through the storage engines and lock writes on each engine. For InnoDB, redo log is locked. For MyRocks, WAL should be locked. 4. Ask storage engines for their coordinates. InnoDB reports its current LSN and checkpoint LSN. MyRocks should report active WAL files names and sizes. 5. Release storage engine's locks 6. Unlock binary log Backup tool will then use this information to copy InnoDB, RocksDB and MySQL binary logs up to specified positions to end up with consistent DB state after restore. Currently, RocksDB allows to obtain the list of WAL files. Only missing bit is the method to lock the writes to WAL files. LockWAL method must flush the WAL in order for the reported size to be accurate (GetSortedWALFiles is using file system stat call to return the file size), also, since backup tool is going to copy the WAL, it is better to be flushed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5146 Differential Revision: D14815447 Pulled By: maysamyabandeh fbshipit-source-id: eec9535a6025229ed471119f19fe7b3d8ae888a3
6 years ago
bool DBImpl::TEST_WALBufferIsEmpty(bool lock) {
if (lock) {
log_write_mutex_.Lock();
}
log::Writer* cur_log_writer = logs_.back().writer;
Expose DB methods to lock and unlock the WAL (#5146) Summary: Expose DB methods to lock and unlock the WAL. These methods are intended to use by MyRocks in order to obtain WAL coordinates in consistent way. Usage scenario is following: MySQL has performance_schema.log_status which provides information that enables a backup tool to copy the required log files without locking for the duration of copy. To populate this table MySQL does following: 1. Lock the binary log. Transactions are not allowed to commit now 2. Save the binary log coordinates 3. Walk through the storage engines and lock writes on each engine. For InnoDB, redo log is locked. For MyRocks, WAL should be locked. 4. Ask storage engines for their coordinates. InnoDB reports its current LSN and checkpoint LSN. MyRocks should report active WAL files names and sizes. 5. Release storage engine's locks 6. Unlock binary log Backup tool will then use this information to copy InnoDB, RocksDB and MySQL binary logs up to specified positions to end up with consistent DB state after restore. Currently, RocksDB allows to obtain the list of WAL files. Only missing bit is the method to lock the writes to WAL files. LockWAL method must flush the WAL in order for the reported size to be accurate (GetSortedWALFiles is using file system stat call to return the file size), also, since backup tool is going to copy the WAL, it is better to be flushed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5146 Differential Revision: D14815447 Pulled By: maysamyabandeh fbshipit-source-id: eec9535a6025229ed471119f19fe7b3d8ae888a3
6 years ago
auto res = cur_log_writer->TEST_BufferIsEmpty();
if (lock) {
log_write_mutex_.Unlock();
}
return res;
}
uint64_t DBImpl::TEST_MaxNextLevelOverlappingBytes(
ColumnFamilyHandle* column_family) {
ColumnFamilyData* cfd;
if (column_family == nullptr) {
cfd = default_cf_handle_->cfd();
} else {
auto cfh = static_cast_with_check<ColumnFamilyHandleImpl>(column_family);
cfd = cfh->cfd();
}
InstrumentedMutexLock l(&mutex_);
return cfd->current()->storage_info()->MaxNextLevelOverlappingBytes();
}
void DBImpl::TEST_GetFilesMetaData(
ColumnFamilyHandle* column_family,
std::vector<std::vector<FileMetaData>>* metadata,
std::vector<std::shared_ptr<BlobFileMetaData>>* blob_metadata) {
Use a sorted vector instead of a map to store blob file metadata (#9526) Summary: The patch replaces `std::map` with a sorted `std::vector` for `VersionStorageInfo::blob_files_` and preallocates the space for the `vector` before saving the `BlobFileMetaData` into the new `VersionStorageInfo` in `VersionBuilder::Rep::SaveBlobFilesTo`. These changes reduce the time the DB mutex is held while saving new `Version`s, and using a sorted `vector` also makes lookups faster thanks to better memory locality. In addition, the patch introduces helper methods `VersionStorageInfo::GetBlobFileMetaData` and `VersionStorageInfo::GetBlobFileMetaDataLB` that can be used by clients to perform lookups in the `vector`, and does some general cleanup in the parts of code where blob file metadata are used. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9526 Test Plan: Ran `make check` and the crash test script for a while. Performance was tested using a load-optimized benchmark (`fillseq` with vector memtable, no WAL) and small file sizes so that a significant number of files are produced: ``` numactl --interleave=all ./db_bench --benchmarks=fillseq --allow_concurrent_memtable_write=false --level0_file_num_compaction_trigger=4 --level0_slowdown_writes_trigger=20 --level0_stop_writes_trigger=30 --max_background_jobs=8 --max_write_buffer_number=8 --db=/data/ltamasi-dbbench --wal_dir=/data/ltamasi-dbbench --num=800000000 --num_levels=8 --key_size=20 --value_size=400 --block_size=8192 --cache_size=51539607552 --cache_numshardbits=6 --compression_max_dict_bytes=0 --compression_ratio=0.5 --compression_type=lz4 --bytes_per_sync=8388608 --cache_index_and_filter_blocks=1 --cache_high_pri_pool_ratio=0.5 --benchmark_write_rate_limit=0 --write_buffer_size=16777216 --target_file_size_base=16777216 --max_bytes_for_level_base=67108864 --verify_checksum=1 --delete_obsolete_files_period_micros=62914560 --max_bytes_for_level_multiplier=8 --statistics=0 --stats_per_interval=1 --stats_interval_seconds=20 --histogram=1 --memtablerep=skip_list --bloom_bits=10 --open_files=-1 --subcompactions=1 --compaction_style=0 --min_level_to_compress=3 --level_compaction_dynamic_level_bytes=true --pin_l0_filter_and_index_blocks_in_cache=1 --soft_pending_compaction_bytes_limit=167503724544 --hard_pending_compaction_bytes_limit=335007449088 --min_level_to_compress=0 --use_existing_db=0 --sync=0 --threads=1 --memtablerep=vector --allow_concurrent_memtable_write=false --disable_wal=1 --enable_blob_files=1 --blob_file_size=16777216 --min_blob_size=0 --blob_compression_type=lz4 --enable_blob_garbage_collection=1 --seed=<some value> ``` Final statistics before the patch: ``` Cumulative writes: 0 writes, 700M keys, 0 commit groups, 0.0 writes per commit group, ingest: 284.62 GB, 121.27 MB/s Interval writes: 0 writes, 334K keys, 0 commit groups, 0.0 writes per commit group, ingest: 139.28 MB, 72.46 MB/s ``` With the patch: ``` Cumulative writes: 0 writes, 760M keys, 0 commit groups, 0.0 writes per commit group, ingest: 308.66 GB, 131.52 MB/s Interval writes: 0 writes, 445K keys, 0 commit groups, 0.0 writes per commit group, ingest: 185.35 MB, 93.15 MB/s ``` Total time to complete the benchmark is 2611 seconds with the patch, down from 2986 secs. Reviewed By: riversand963 Differential Revision: D34082728 Pulled By: ltamasi fbshipit-source-id: fc598abf676dce436734d06bb9d2d99a26a004fc
3 years ago
assert(metadata);
auto cfh = static_cast_with_check<ColumnFamilyHandleImpl>(column_family);
Use a sorted vector instead of a map to store blob file metadata (#9526) Summary: The patch replaces `std::map` with a sorted `std::vector` for `VersionStorageInfo::blob_files_` and preallocates the space for the `vector` before saving the `BlobFileMetaData` into the new `VersionStorageInfo` in `VersionBuilder::Rep::SaveBlobFilesTo`. These changes reduce the time the DB mutex is held while saving new `Version`s, and using a sorted `vector` also makes lookups faster thanks to better memory locality. In addition, the patch introduces helper methods `VersionStorageInfo::GetBlobFileMetaData` and `VersionStorageInfo::GetBlobFileMetaDataLB` that can be used by clients to perform lookups in the `vector`, and does some general cleanup in the parts of code where blob file metadata are used. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9526 Test Plan: Ran `make check` and the crash test script for a while. Performance was tested using a load-optimized benchmark (`fillseq` with vector memtable, no WAL) and small file sizes so that a significant number of files are produced: ``` numactl --interleave=all ./db_bench --benchmarks=fillseq --allow_concurrent_memtable_write=false --level0_file_num_compaction_trigger=4 --level0_slowdown_writes_trigger=20 --level0_stop_writes_trigger=30 --max_background_jobs=8 --max_write_buffer_number=8 --db=/data/ltamasi-dbbench --wal_dir=/data/ltamasi-dbbench --num=800000000 --num_levels=8 --key_size=20 --value_size=400 --block_size=8192 --cache_size=51539607552 --cache_numshardbits=6 --compression_max_dict_bytes=0 --compression_ratio=0.5 --compression_type=lz4 --bytes_per_sync=8388608 --cache_index_and_filter_blocks=1 --cache_high_pri_pool_ratio=0.5 --benchmark_write_rate_limit=0 --write_buffer_size=16777216 --target_file_size_base=16777216 --max_bytes_for_level_base=67108864 --verify_checksum=1 --delete_obsolete_files_period_micros=62914560 --max_bytes_for_level_multiplier=8 --statistics=0 --stats_per_interval=1 --stats_interval_seconds=20 --histogram=1 --memtablerep=skip_list --bloom_bits=10 --open_files=-1 --subcompactions=1 --compaction_style=0 --min_level_to_compress=3 --level_compaction_dynamic_level_bytes=true --pin_l0_filter_and_index_blocks_in_cache=1 --soft_pending_compaction_bytes_limit=167503724544 --hard_pending_compaction_bytes_limit=335007449088 --min_level_to_compress=0 --use_existing_db=0 --sync=0 --threads=1 --memtablerep=vector --allow_concurrent_memtable_write=false --disable_wal=1 --enable_blob_files=1 --blob_file_size=16777216 --min_blob_size=0 --blob_compression_type=lz4 --enable_blob_garbage_collection=1 --seed=<some value> ``` Final statistics before the patch: ``` Cumulative writes: 0 writes, 700M keys, 0 commit groups, 0.0 writes per commit group, ingest: 284.62 GB, 121.27 MB/s Interval writes: 0 writes, 334K keys, 0 commit groups, 0.0 writes per commit group, ingest: 139.28 MB, 72.46 MB/s ``` With the patch: ``` Cumulative writes: 0 writes, 760M keys, 0 commit groups, 0.0 writes per commit group, ingest: 308.66 GB, 131.52 MB/s Interval writes: 0 writes, 445K keys, 0 commit groups, 0.0 writes per commit group, ingest: 185.35 MB, 93.15 MB/s ``` Total time to complete the benchmark is 2611 seconds with the patch, down from 2986 secs. Reviewed By: riversand963 Differential Revision: D34082728 Pulled By: ltamasi fbshipit-source-id: fc598abf676dce436734d06bb9d2d99a26a004fc
3 years ago
assert(cfh);
auto cfd = cfh->cfd();
Use a sorted vector instead of a map to store blob file metadata (#9526) Summary: The patch replaces `std::map` with a sorted `std::vector` for `VersionStorageInfo::blob_files_` and preallocates the space for the `vector` before saving the `BlobFileMetaData` into the new `VersionStorageInfo` in `VersionBuilder::Rep::SaveBlobFilesTo`. These changes reduce the time the DB mutex is held while saving new `Version`s, and using a sorted `vector` also makes lookups faster thanks to better memory locality. In addition, the patch introduces helper methods `VersionStorageInfo::GetBlobFileMetaData` and `VersionStorageInfo::GetBlobFileMetaDataLB` that can be used by clients to perform lookups in the `vector`, and does some general cleanup in the parts of code where blob file metadata are used. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9526 Test Plan: Ran `make check` and the crash test script for a while. Performance was tested using a load-optimized benchmark (`fillseq` with vector memtable, no WAL) and small file sizes so that a significant number of files are produced: ``` numactl --interleave=all ./db_bench --benchmarks=fillseq --allow_concurrent_memtable_write=false --level0_file_num_compaction_trigger=4 --level0_slowdown_writes_trigger=20 --level0_stop_writes_trigger=30 --max_background_jobs=8 --max_write_buffer_number=8 --db=/data/ltamasi-dbbench --wal_dir=/data/ltamasi-dbbench --num=800000000 --num_levels=8 --key_size=20 --value_size=400 --block_size=8192 --cache_size=51539607552 --cache_numshardbits=6 --compression_max_dict_bytes=0 --compression_ratio=0.5 --compression_type=lz4 --bytes_per_sync=8388608 --cache_index_and_filter_blocks=1 --cache_high_pri_pool_ratio=0.5 --benchmark_write_rate_limit=0 --write_buffer_size=16777216 --target_file_size_base=16777216 --max_bytes_for_level_base=67108864 --verify_checksum=1 --delete_obsolete_files_period_micros=62914560 --max_bytes_for_level_multiplier=8 --statistics=0 --stats_per_interval=1 --stats_interval_seconds=20 --histogram=1 --memtablerep=skip_list --bloom_bits=10 --open_files=-1 --subcompactions=1 --compaction_style=0 --min_level_to_compress=3 --level_compaction_dynamic_level_bytes=true --pin_l0_filter_and_index_blocks_in_cache=1 --soft_pending_compaction_bytes_limit=167503724544 --hard_pending_compaction_bytes_limit=335007449088 --min_level_to_compress=0 --use_existing_db=0 --sync=0 --threads=1 --memtablerep=vector --allow_concurrent_memtable_write=false --disable_wal=1 --enable_blob_files=1 --blob_file_size=16777216 --min_blob_size=0 --blob_compression_type=lz4 --enable_blob_garbage_collection=1 --seed=<some value> ``` Final statistics before the patch: ``` Cumulative writes: 0 writes, 700M keys, 0 commit groups, 0.0 writes per commit group, ingest: 284.62 GB, 121.27 MB/s Interval writes: 0 writes, 334K keys, 0 commit groups, 0.0 writes per commit group, ingest: 139.28 MB, 72.46 MB/s ``` With the patch: ``` Cumulative writes: 0 writes, 760M keys, 0 commit groups, 0.0 writes per commit group, ingest: 308.66 GB, 131.52 MB/s Interval writes: 0 writes, 445K keys, 0 commit groups, 0.0 writes per commit group, ingest: 185.35 MB, 93.15 MB/s ``` Total time to complete the benchmark is 2611 seconds with the patch, down from 2986 secs. Reviewed By: riversand963 Differential Revision: D34082728 Pulled By: ltamasi fbshipit-source-id: fc598abf676dce436734d06bb9d2d99a26a004fc
3 years ago
assert(cfd);
InstrumentedMutexLock l(&mutex_);
Use a sorted vector instead of a map to store blob file metadata (#9526) Summary: The patch replaces `std::map` with a sorted `std::vector` for `VersionStorageInfo::blob_files_` and preallocates the space for the `vector` before saving the `BlobFileMetaData` into the new `VersionStorageInfo` in `VersionBuilder::Rep::SaveBlobFilesTo`. These changes reduce the time the DB mutex is held while saving new `Version`s, and using a sorted `vector` also makes lookups faster thanks to better memory locality. In addition, the patch introduces helper methods `VersionStorageInfo::GetBlobFileMetaData` and `VersionStorageInfo::GetBlobFileMetaDataLB` that can be used by clients to perform lookups in the `vector`, and does some general cleanup in the parts of code where blob file metadata are used. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9526 Test Plan: Ran `make check` and the crash test script for a while. Performance was tested using a load-optimized benchmark (`fillseq` with vector memtable, no WAL) and small file sizes so that a significant number of files are produced: ``` numactl --interleave=all ./db_bench --benchmarks=fillseq --allow_concurrent_memtable_write=false --level0_file_num_compaction_trigger=4 --level0_slowdown_writes_trigger=20 --level0_stop_writes_trigger=30 --max_background_jobs=8 --max_write_buffer_number=8 --db=/data/ltamasi-dbbench --wal_dir=/data/ltamasi-dbbench --num=800000000 --num_levels=8 --key_size=20 --value_size=400 --block_size=8192 --cache_size=51539607552 --cache_numshardbits=6 --compression_max_dict_bytes=0 --compression_ratio=0.5 --compression_type=lz4 --bytes_per_sync=8388608 --cache_index_and_filter_blocks=1 --cache_high_pri_pool_ratio=0.5 --benchmark_write_rate_limit=0 --write_buffer_size=16777216 --target_file_size_base=16777216 --max_bytes_for_level_base=67108864 --verify_checksum=1 --delete_obsolete_files_period_micros=62914560 --max_bytes_for_level_multiplier=8 --statistics=0 --stats_per_interval=1 --stats_interval_seconds=20 --histogram=1 --memtablerep=skip_list --bloom_bits=10 --open_files=-1 --subcompactions=1 --compaction_style=0 --min_level_to_compress=3 --level_compaction_dynamic_level_bytes=true --pin_l0_filter_and_index_blocks_in_cache=1 --soft_pending_compaction_bytes_limit=167503724544 --hard_pending_compaction_bytes_limit=335007449088 --min_level_to_compress=0 --use_existing_db=0 --sync=0 --threads=1 --memtablerep=vector --allow_concurrent_memtable_write=false --disable_wal=1 --enable_blob_files=1 --blob_file_size=16777216 --min_blob_size=0 --blob_compression_type=lz4 --enable_blob_garbage_collection=1 --seed=<some value> ``` Final statistics before the patch: ``` Cumulative writes: 0 writes, 700M keys, 0 commit groups, 0.0 writes per commit group, ingest: 284.62 GB, 121.27 MB/s Interval writes: 0 writes, 334K keys, 0 commit groups, 0.0 writes per commit group, ingest: 139.28 MB, 72.46 MB/s ``` With the patch: ``` Cumulative writes: 0 writes, 760M keys, 0 commit groups, 0.0 writes per commit group, ingest: 308.66 GB, 131.52 MB/s Interval writes: 0 writes, 445K keys, 0 commit groups, 0.0 writes per commit group, ingest: 185.35 MB, 93.15 MB/s ``` Total time to complete the benchmark is 2611 seconds with the patch, down from 2986 secs. Reviewed By: riversand963 Differential Revision: D34082728 Pulled By: ltamasi fbshipit-source-id: fc598abf676dce436734d06bb9d2d99a26a004fc
3 years ago
const auto* current = cfd->current();
assert(current);
const auto* vstorage = current->storage_info();
assert(vstorage);
metadata->resize(NumberLevels());
Use a sorted vector instead of a map to store blob file metadata (#9526) Summary: The patch replaces `std::map` with a sorted `std::vector` for `VersionStorageInfo::blob_files_` and preallocates the space for the `vector` before saving the `BlobFileMetaData` into the new `VersionStorageInfo` in `VersionBuilder::Rep::SaveBlobFilesTo`. These changes reduce the time the DB mutex is held while saving new `Version`s, and using a sorted `vector` also makes lookups faster thanks to better memory locality. In addition, the patch introduces helper methods `VersionStorageInfo::GetBlobFileMetaData` and `VersionStorageInfo::GetBlobFileMetaDataLB` that can be used by clients to perform lookups in the `vector`, and does some general cleanup in the parts of code where blob file metadata are used. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9526 Test Plan: Ran `make check` and the crash test script for a while. Performance was tested using a load-optimized benchmark (`fillseq` with vector memtable, no WAL) and small file sizes so that a significant number of files are produced: ``` numactl --interleave=all ./db_bench --benchmarks=fillseq --allow_concurrent_memtable_write=false --level0_file_num_compaction_trigger=4 --level0_slowdown_writes_trigger=20 --level0_stop_writes_trigger=30 --max_background_jobs=8 --max_write_buffer_number=8 --db=/data/ltamasi-dbbench --wal_dir=/data/ltamasi-dbbench --num=800000000 --num_levels=8 --key_size=20 --value_size=400 --block_size=8192 --cache_size=51539607552 --cache_numshardbits=6 --compression_max_dict_bytes=0 --compression_ratio=0.5 --compression_type=lz4 --bytes_per_sync=8388608 --cache_index_and_filter_blocks=1 --cache_high_pri_pool_ratio=0.5 --benchmark_write_rate_limit=0 --write_buffer_size=16777216 --target_file_size_base=16777216 --max_bytes_for_level_base=67108864 --verify_checksum=1 --delete_obsolete_files_period_micros=62914560 --max_bytes_for_level_multiplier=8 --statistics=0 --stats_per_interval=1 --stats_interval_seconds=20 --histogram=1 --memtablerep=skip_list --bloom_bits=10 --open_files=-1 --subcompactions=1 --compaction_style=0 --min_level_to_compress=3 --level_compaction_dynamic_level_bytes=true --pin_l0_filter_and_index_blocks_in_cache=1 --soft_pending_compaction_bytes_limit=167503724544 --hard_pending_compaction_bytes_limit=335007449088 --min_level_to_compress=0 --use_existing_db=0 --sync=0 --threads=1 --memtablerep=vector --allow_concurrent_memtable_write=false --disable_wal=1 --enable_blob_files=1 --blob_file_size=16777216 --min_blob_size=0 --blob_compression_type=lz4 --enable_blob_garbage_collection=1 --seed=<some value> ``` Final statistics before the patch: ``` Cumulative writes: 0 writes, 700M keys, 0 commit groups, 0.0 writes per commit group, ingest: 284.62 GB, 121.27 MB/s Interval writes: 0 writes, 334K keys, 0 commit groups, 0.0 writes per commit group, ingest: 139.28 MB, 72.46 MB/s ``` With the patch: ``` Cumulative writes: 0 writes, 760M keys, 0 commit groups, 0.0 writes per commit group, ingest: 308.66 GB, 131.52 MB/s Interval writes: 0 writes, 445K keys, 0 commit groups, 0.0 writes per commit group, ingest: 185.35 MB, 93.15 MB/s ``` Total time to complete the benchmark is 2611 seconds with the patch, down from 2986 secs. Reviewed By: riversand963 Differential Revision: D34082728 Pulled By: ltamasi fbshipit-source-id: fc598abf676dce436734d06bb9d2d99a26a004fc
3 years ago
for (int level = 0; level < NumberLevels(); ++level) {
const std::vector<FileMetaData*>& files = vstorage->LevelFiles(level);
(*metadata)[level].clear();
Use a sorted vector instead of a map to store blob file metadata (#9526) Summary: The patch replaces `std::map` with a sorted `std::vector` for `VersionStorageInfo::blob_files_` and preallocates the space for the `vector` before saving the `BlobFileMetaData` into the new `VersionStorageInfo` in `VersionBuilder::Rep::SaveBlobFilesTo`. These changes reduce the time the DB mutex is held while saving new `Version`s, and using a sorted `vector` also makes lookups faster thanks to better memory locality. In addition, the patch introduces helper methods `VersionStorageInfo::GetBlobFileMetaData` and `VersionStorageInfo::GetBlobFileMetaDataLB` that can be used by clients to perform lookups in the `vector`, and does some general cleanup in the parts of code where blob file metadata are used. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9526 Test Plan: Ran `make check` and the crash test script for a while. Performance was tested using a load-optimized benchmark (`fillseq` with vector memtable, no WAL) and small file sizes so that a significant number of files are produced: ``` numactl --interleave=all ./db_bench --benchmarks=fillseq --allow_concurrent_memtable_write=false --level0_file_num_compaction_trigger=4 --level0_slowdown_writes_trigger=20 --level0_stop_writes_trigger=30 --max_background_jobs=8 --max_write_buffer_number=8 --db=/data/ltamasi-dbbench --wal_dir=/data/ltamasi-dbbench --num=800000000 --num_levels=8 --key_size=20 --value_size=400 --block_size=8192 --cache_size=51539607552 --cache_numshardbits=6 --compression_max_dict_bytes=0 --compression_ratio=0.5 --compression_type=lz4 --bytes_per_sync=8388608 --cache_index_and_filter_blocks=1 --cache_high_pri_pool_ratio=0.5 --benchmark_write_rate_limit=0 --write_buffer_size=16777216 --target_file_size_base=16777216 --max_bytes_for_level_base=67108864 --verify_checksum=1 --delete_obsolete_files_period_micros=62914560 --max_bytes_for_level_multiplier=8 --statistics=0 --stats_per_interval=1 --stats_interval_seconds=20 --histogram=1 --memtablerep=skip_list --bloom_bits=10 --open_files=-1 --subcompactions=1 --compaction_style=0 --min_level_to_compress=3 --level_compaction_dynamic_level_bytes=true --pin_l0_filter_and_index_blocks_in_cache=1 --soft_pending_compaction_bytes_limit=167503724544 --hard_pending_compaction_bytes_limit=335007449088 --min_level_to_compress=0 --use_existing_db=0 --sync=0 --threads=1 --memtablerep=vector --allow_concurrent_memtable_write=false --disable_wal=1 --enable_blob_files=1 --blob_file_size=16777216 --min_blob_size=0 --blob_compression_type=lz4 --enable_blob_garbage_collection=1 --seed=<some value> ``` Final statistics before the patch: ``` Cumulative writes: 0 writes, 700M keys, 0 commit groups, 0.0 writes per commit group, ingest: 284.62 GB, 121.27 MB/s Interval writes: 0 writes, 334K keys, 0 commit groups, 0.0 writes per commit group, ingest: 139.28 MB, 72.46 MB/s ``` With the patch: ``` Cumulative writes: 0 writes, 760M keys, 0 commit groups, 0.0 writes per commit group, ingest: 308.66 GB, 131.52 MB/s Interval writes: 0 writes, 445K keys, 0 commit groups, 0.0 writes per commit group, ingest: 185.35 MB, 93.15 MB/s ``` Total time to complete the benchmark is 2611 seconds with the patch, down from 2986 secs. Reviewed By: riversand963 Differential Revision: D34082728 Pulled By: ltamasi fbshipit-source-id: fc598abf676dce436734d06bb9d2d99a26a004fc
3 years ago
(*metadata)[level].reserve(files.size());
for (const auto& f : files) {
(*metadata)[level].push_back(*f);
}
}
Use a sorted vector instead of a map to store blob file metadata (#9526) Summary: The patch replaces `std::map` with a sorted `std::vector` for `VersionStorageInfo::blob_files_` and preallocates the space for the `vector` before saving the `BlobFileMetaData` into the new `VersionStorageInfo` in `VersionBuilder::Rep::SaveBlobFilesTo`. These changes reduce the time the DB mutex is held while saving new `Version`s, and using a sorted `vector` also makes lookups faster thanks to better memory locality. In addition, the patch introduces helper methods `VersionStorageInfo::GetBlobFileMetaData` and `VersionStorageInfo::GetBlobFileMetaDataLB` that can be used by clients to perform lookups in the `vector`, and does some general cleanup in the parts of code where blob file metadata are used. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9526 Test Plan: Ran `make check` and the crash test script for a while. Performance was tested using a load-optimized benchmark (`fillseq` with vector memtable, no WAL) and small file sizes so that a significant number of files are produced: ``` numactl --interleave=all ./db_bench --benchmarks=fillseq --allow_concurrent_memtable_write=false --level0_file_num_compaction_trigger=4 --level0_slowdown_writes_trigger=20 --level0_stop_writes_trigger=30 --max_background_jobs=8 --max_write_buffer_number=8 --db=/data/ltamasi-dbbench --wal_dir=/data/ltamasi-dbbench --num=800000000 --num_levels=8 --key_size=20 --value_size=400 --block_size=8192 --cache_size=51539607552 --cache_numshardbits=6 --compression_max_dict_bytes=0 --compression_ratio=0.5 --compression_type=lz4 --bytes_per_sync=8388608 --cache_index_and_filter_blocks=1 --cache_high_pri_pool_ratio=0.5 --benchmark_write_rate_limit=0 --write_buffer_size=16777216 --target_file_size_base=16777216 --max_bytes_for_level_base=67108864 --verify_checksum=1 --delete_obsolete_files_period_micros=62914560 --max_bytes_for_level_multiplier=8 --statistics=0 --stats_per_interval=1 --stats_interval_seconds=20 --histogram=1 --memtablerep=skip_list --bloom_bits=10 --open_files=-1 --subcompactions=1 --compaction_style=0 --min_level_to_compress=3 --level_compaction_dynamic_level_bytes=true --pin_l0_filter_and_index_blocks_in_cache=1 --soft_pending_compaction_bytes_limit=167503724544 --hard_pending_compaction_bytes_limit=335007449088 --min_level_to_compress=0 --use_existing_db=0 --sync=0 --threads=1 --memtablerep=vector --allow_concurrent_memtable_write=false --disable_wal=1 --enable_blob_files=1 --blob_file_size=16777216 --min_blob_size=0 --blob_compression_type=lz4 --enable_blob_garbage_collection=1 --seed=<some value> ``` Final statistics before the patch: ``` Cumulative writes: 0 writes, 700M keys, 0 commit groups, 0.0 writes per commit group, ingest: 284.62 GB, 121.27 MB/s Interval writes: 0 writes, 334K keys, 0 commit groups, 0.0 writes per commit group, ingest: 139.28 MB, 72.46 MB/s ``` With the patch: ``` Cumulative writes: 0 writes, 760M keys, 0 commit groups, 0.0 writes per commit group, ingest: 308.66 GB, 131.52 MB/s Interval writes: 0 writes, 445K keys, 0 commit groups, 0.0 writes per commit group, ingest: 185.35 MB, 93.15 MB/s ``` Total time to complete the benchmark is 2611 seconds with the patch, down from 2986 secs. Reviewed By: riversand963 Differential Revision: D34082728 Pulled By: ltamasi fbshipit-source-id: fc598abf676dce436734d06bb9d2d99a26a004fc
3 years ago
if (blob_metadata) {
*blob_metadata = vstorage->GetBlobFiles();
}
}
uint64_t DBImpl::TEST_Current_Manifest_FileNo() {
return versions_->manifest_file_number();
}
uint64_t DBImpl::TEST_Current_Next_FileNo() {
return versions_->current_next_file_number();
}
Status DBImpl::TEST_CompactRange(int level, const Slice* begin,
const Slice* end,
Allowing L0 -> L1 trivial move on sorted data Summary: This diff updates the logic of how we do trivial move, now trivial move can run on any number of files in input level as long as they are not overlapping The conditions for trivial move have been updated Introduced conditions: - Trivial move cannot happen if we have a compaction filter (except if the compaction is not manual) - Input level files cannot be overlapping Removed conditions: - Trivial move only run when the compaction is not manual - Input level should can contain only 1 file More context on what tests failed because of Trivial move ``` DBTest.CompactionsGenerateMultipleFiles This test is expecting compaction on a file in L0 to generate multiple files in L1, this test will fail with trivial move because we end up with one file in L1 ``` ``` DBTest.NoSpaceCompactRange This test expect compaction to fail when we force environment to report running out of space, of course this is not valid in trivial move situation because trivial move does not need any extra space, and did not check for that ``` ``` DBTest.DropWrites Similar to DBTest.NoSpaceCompactRange ``` ``` DBTest.DeleteObsoleteFilesPendingOutputs This test expect that a file in L2 is deleted after it's moved to L3, this is not valid with trivial move because although the file was moved it is now used by L3 ``` ``` CuckooTableDBTest.CompactionIntoMultipleFiles Same as DBTest.CompactionsGenerateMultipleFiles ``` This diff is based on a work by @sdong https://reviews.facebook.net/D34149 Test Plan: make -j64 check Reviewers: rven, sdong, igor Reviewed By: igor Subscribers: yhchiang, ott, march, dhruba, sdong Differential Revision: https://reviews.facebook.net/D34797
10 years ago
ColumnFamilyHandle* column_family,
bool disallow_trivial_move) {
ColumnFamilyData* cfd;
if (column_family == nullptr) {
cfd = default_cf_handle_->cfd();
} else {
auto cfh = static_cast_with_check<ColumnFamilyHandleImpl>(column_family);
cfd = cfh->cfd();
}
int output_level =
(cfd->ioptions()->compaction_style == kCompactionStyleUniversal ||
cfd->ioptions()->compaction_style == kCompactionStyleFIFO)
? level
: level + 1;
return RunManualCompaction(cfd, level, output_level, CompactRangeOptions(),
begin, end, true, disallow_trivial_move,
port::kMaxUint64 /*max_file_num_to_ignore*/,
"" /*trim_ts*/);
}
Status DBImpl::TEST_SwitchMemtable(ColumnFamilyData* cfd) {
WriteContext write_context;
InstrumentedMutexLock l(&mutex_);
if (cfd == nullptr) {
cfd = default_cf_handle_->cfd();
}
Status s;
void* writer = TEST_BeginWrite();
if (two_write_queues_) {
WriteThread::Writer nonmem_w;
nonmem_write_thread_.EnterUnbatched(&nonmem_w, &mutex_);
s = SwitchMemtable(cfd, &write_context);
nonmem_write_thread_.ExitUnbatched(&nonmem_w);
} else {
s = SwitchMemtable(cfd, &write_context);
}
TEST_EndWrite(writer);
return s;
}
Status DBImpl::TEST_FlushMemTable(bool wait, bool allow_write_stall,
ColumnFamilyHandle* cfh) {
FlushOptions fo;
fo.wait = wait;
fo.allow_write_stall = allow_write_stall;
ColumnFamilyData* cfd;
if (cfh == nullptr) {
cfd = default_cf_handle_->cfd();
} else {
auto cfhi = static_cast_with_check<ColumnFamilyHandleImpl>(cfh);
cfd = cfhi->cfd();
}
return FlushMemTable(cfd, fo, FlushReason::kTest);
}
Status DBImpl::TEST_FlushMemTable(ColumnFamilyData* cfd,
const FlushOptions& flush_opts) {
return FlushMemTable(cfd, flush_opts, FlushReason::kTest);
}
Status DBImpl::TEST_AtomicFlushMemTables(
const autovector<ColumnFamilyData*>& cfds, const FlushOptions& flush_opts) {
return AtomicFlushMemTables(cfds, flush_opts, FlushReason::kTest);
}
Fix race condition in BackupEngineTest.ChangeManifestDuringBackupCreation (#9327) Summary: The failure looked like this: ``` utilities/backupable/backupable_db_test.cc:3161: Failure Value of: db_chroot_env_->FileExists(prev_manifest_path).IsNotFound() Actual: false Expected: true ``` The failure could be coerced consistently with the following patch: ``` diff --git a/db/db_impl/db_impl_compaction_flush.cc b/db/db_impl/db_impl_compaction_flush.cc index 80410f671..637636791 100644 --- a/db/db_impl/db_impl_compaction_flush.cc +++ b/db/db_impl/db_impl_compaction_flush.cc @@ -2772,6 +2772,8 @@ void DBImpl::BackgroundCallFlush(Env::Priority thread_pri) { if (job_context.HaveSomethingToClean() || job_context.HaveSomethingToDelete() || !log_buffer.IsEmpty()) { mutex_.Unlock(); + bg_cv_.SignalAll(); + sleep(1); TEST_SYNC_POINT("DBImpl::BackgroundCallFlush:FilesFound"); // Have to flush the info logs before bg_flush_scheduled_-- // because if bg_flush_scheduled_ becomes 0 and the lock is ``` The cause was a familiar problem, which is manual flush/compaction may return before files they obsoleted are removed. The solution is just to wait for "scheduled" work to complete, which includes all phases including cleanup. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9327 Test Plan: after this PR, even the above patch to coerce the bug cannot cause the test to fail. Reviewed By: riversand963 Differential Revision: D33252208 Pulled By: ajkr fbshipit-source-id: 720a7eaca58c7247d221911fffe3d5e1dbf581e9
3 years ago
Status DBImpl::TEST_WaitForBackgroundWork() {
InstrumentedMutexLock l(&mutex_);
WaitForBackgroundWork();
return error_handler_.GetBGError();
Fix race condition in BackupEngineTest.ChangeManifestDuringBackupCreation (#9327) Summary: The failure looked like this: ``` utilities/backupable/backupable_db_test.cc:3161: Failure Value of: db_chroot_env_->FileExists(prev_manifest_path).IsNotFound() Actual: false Expected: true ``` The failure could be coerced consistently with the following patch: ``` diff --git a/db/db_impl/db_impl_compaction_flush.cc b/db/db_impl/db_impl_compaction_flush.cc index 80410f671..637636791 100644 --- a/db/db_impl/db_impl_compaction_flush.cc +++ b/db/db_impl/db_impl_compaction_flush.cc @@ -2772,6 +2772,8 @@ void DBImpl::BackgroundCallFlush(Env::Priority thread_pri) { if (job_context.HaveSomethingToClean() || job_context.HaveSomethingToDelete() || !log_buffer.IsEmpty()) { mutex_.Unlock(); + bg_cv_.SignalAll(); + sleep(1); TEST_SYNC_POINT("DBImpl::BackgroundCallFlush:FilesFound"); // Have to flush the info logs before bg_flush_scheduled_-- // because if bg_flush_scheduled_ becomes 0 and the lock is ``` The cause was a familiar problem, which is manual flush/compaction may return before files they obsoleted are removed. The solution is just to wait for "scheduled" work to complete, which includes all phases including cleanup. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9327 Test Plan: after this PR, even the above patch to coerce the bug cannot cause the test to fail. Reviewed By: riversand963 Differential Revision: D33252208 Pulled By: ajkr fbshipit-source-id: 720a7eaca58c7247d221911fffe3d5e1dbf581e9
3 years ago
}
Status DBImpl::TEST_WaitForFlushMemTable(ColumnFamilyHandle* column_family) {
ColumnFamilyData* cfd;
if (column_family == nullptr) {
cfd = default_cf_handle_->cfd();
} else {
auto cfh = static_cast_with_check<ColumnFamilyHandleImpl>(column_family);
cfd = cfh->cfd();
}
return WaitForFlushMemTable(cfd, nullptr, false);
}
Status DBImpl::TEST_WaitForCompact(bool wait_unscheduled) {
// Wait until the compaction completes
return WaitForCompact(wait_unscheduled);
}
Status DBImpl::TEST_WaitForPurge() {
InstrumentedMutexLock l(&mutex_);
while (bg_purge_scheduled_ && error_handler_.GetBGError().ok()) {
bg_cv_.Wait();
}
return error_handler_.GetBGError();
}
Status DBImpl::TEST_GetBGError() {
InstrumentedMutexLock l(&mutex_);
return error_handler_.GetBGError();
}
void DBImpl::TEST_LockMutex() { mutex_.Lock(); }
void DBImpl::TEST_UnlockMutex() { mutex_.Unlock(); }
void* DBImpl::TEST_BeginWrite() {
auto w = new WriteThread::Writer();
write_thread_.EnterUnbatched(w, &mutex_);
return reinterpret_cast<void*>(w);
}
void DBImpl::TEST_EndWrite(void* w) {
auto writer = reinterpret_cast<WriteThread::Writer*>(w);
write_thread_.ExitUnbatched(writer);
delete writer;
}
size_t DBImpl::TEST_LogsToFreeSize() {
InstrumentedMutexLock l(&mutex_);
return logs_to_free_.size();
}
uint64_t DBImpl::TEST_LogfileNumber() {
InstrumentedMutexLock l(&mutex_);
return logfile_number_;
}
Status DBImpl::TEST_GetAllImmutableCFOptions(
std::unordered_map<std::string, const ImmutableCFOptions*>* iopts_map) {
std::vector<std::string> cf_names;
std::vector<const ImmutableCFOptions*> iopts;
{
InstrumentedMutexLock l(&mutex_);
for (auto cfd : *versions_->GetColumnFamilySet()) {
cf_names.push_back(cfd->GetName());
iopts.push_back(cfd->ioptions());
}
}
iopts_map->clear();
for (size_t i = 0; i < cf_names.size(); ++i) {
iopts_map->insert({cf_names[i], iopts[i]});
}
return Status::OK();
}
uint64_t DBImpl::TEST_FindMinLogContainingOutstandingPrep() {
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
7 years ago
return logs_with_prep_tracker_.FindMinLogContainingOutstandingPrep();
}
size_t DBImpl::TEST_PreparedSectionCompletedSize() {
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
7 years ago
return logs_with_prep_tracker_.TEST_PreparedSectionCompletedSize();
}
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
7 years ago
size_t DBImpl::TEST_LogsWithPrepSize() {
return logs_with_prep_tracker_.TEST_LogsWithPrepSize();
}
uint64_t DBImpl::TEST_FindMinPrepLogReferencedByMemTable() {
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
7 years ago
autovector<MemTable*> empty_list;
Fix a silent data loss for write-committed txn (#9571) Summary: The following sequence of events can cause silent data loss for write-committed transactions. ``` Time thread 1 bg flush | db->Put("a") | txn = NewTxn() | txn->Put("b", "v") | txn->Prepare() // writes only to 5.log | db->SwitchMemtable() // memtable 1 has "a" | // close 5.log, | // creates 8.log | trigger flush | pick memtable 1 | unlock db mutex | write new sst | txn->ctwb->Put("gtid", "1") // writes 8.log | txn->Commit() // writes to 8.log | // writes to memtable 2 | compute min_log_number_to_keep_2pc, this | will be 8 (incorrect). | | Purge obsolete wals, including 5.log | V ``` At this point, writes of txn exists only in memtable. Close db without flush because db thinks the data in memtable are backed by log. Then reopen, the writes are lost except key-value pair {"gtid"->"1"}, only the commit marker of txn is in 8.log The reason lies in `PrecomputeMinLogNumberToKeep2PC()` which calls `FindMinPrepLogReferencedByMemTable()`. In the above example, when bg flush thread tries to find obsolete wals, it uses the information computed by `PrecomputeMinLogNumberToKeep2PC()`. The return value of `PrecomputeMinLogNumberToKeep2PC()` depends on three components - `PrecomputeMinLogNumberToKeepNon2PC()`. This represents the WAL that has unflushed data. As the name of this method suggests, it does not account for 2PC. Although the keys reside in the prepare section of a previous WAL, the column family references the current WAL when they are actually inserted into the memtable during txn commit. - `prep_tracker->FindMinLogContainingOutstandingPrep()`. This represents the WAL with a prepare section but the txn hasn't committed. - `FindMinPrepLogReferencedByMemTable()`. This represents the WAL on which some memtables (mutable and immutable) depend for their unflushed data. The bug lies in `FindMinPrepLogReferencedByMemTable()`. Originally, this function skips checking the column families that are being flushed, but the unit test added in this PR shows that they should not be. In this unit test, there is only the default column family, and one of its memtables has unflushed data backed by a prepare section in 5.log. We should return this information via `FindMinPrepLogReferencedByMemTable()`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9571 Test Plan: ``` ./transaction_test --gtest_filter=*/TransactionTest.SwitchMemtableDuringPrepareAndCommit_WC/* make check ``` Reviewed By: siying Differential Revision: D34235236 Pulled By: riversand963 fbshipit-source-id: 120eb21a666728a38dda77b96276c6af72b008b1
3 years ago
return FindMinPrepLogReferencedByMemTable(versions_.get(), empty_list);
}
Status DBImpl::TEST_GetLatestMutableCFOptions(
ColumnFamilyHandle* column_family, MutableCFOptions* mutable_cf_options) {
InstrumentedMutexLock l(&mutex_);
auto cfh = static_cast_with_check<ColumnFamilyHandleImpl>(column_family);
*mutable_cf_options = *cfh->cfd()->GetLatestMutableCFOptions();
return Status::OK();
}
int DBImpl::TEST_BGCompactionsAllowed() const {
InstrumentedMutexLock l(&mutex_);
return GetBGJobLimits().max_compactions;
}
int DBImpl::TEST_BGFlushesAllowed() const {
InstrumentedMutexLock l(&mutex_);
return GetBGJobLimits().max_flushes;
}
SequenceNumber DBImpl::TEST_GetLastVisibleSequence() const {
if (last_seq_same_as_publish_seq_) {
return versions_->LastSequence();
} else {
return versions_->LastAllocatedSequence();
}
}
size_t DBImpl::TEST_GetWalPreallocateBlockSize(
uint64_t write_buffer_size) const {
InstrumentedMutexLock l(&mutex_);
return GetWalPreallocateBlockSize(write_buffer_size);
}
#ifndef ROCKSDB_LITE
void DBImpl::TEST_WaitForStatsDumpRun(std::function<void()> callback) const {
if (periodic_work_scheduler_ != nullptr) {
static_cast<PeriodicWorkTestScheduler*>(periodic_work_scheduler_)
->TEST_WaitForRun(callback);
move dump stats to a separate thread (#4382) Summary: Currently statistics are supposed to be dumped to info log at intervals of `options.stats_dump_period_sec`. However the implementation choice was to bind it with compaction thread, meaning if the database has been serving very light traffic, the stats may not get dumped at all. We decided to separate stats dumping into a new timed thread using `TimerQueue`, which is already used in blob_db. This will allow us schedule new timed tasks with more deterministic behavior. Tested with db_bench using `--stats_dump_period_sec=20` in command line: > LOG:2018/09/17-14:07:45.575025 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS ------- LOG:2018/09/17-14:08:05.643286 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS ------- LOG:2018/09/17-14:08:25.691325 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS ------- LOG:2018/09/17-14:08:45.740989 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS ------- LOG content: > 2018/09/17-14:07:45.575025 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS ------- 2018/09/17-14:07:45.575080 7fe99fbfe700 [WARN] [db/db_impl.cc:606] ** DB Stats ** Uptime(secs): 20.0 total, 20.0 interval Cumulative writes: 4447K writes, 4447K keys, 4447K commit groups, 1.0 writes per commit group, ingest: 5.57 GB, 285.01 MB/s Cumulative WAL: 4447K writes, 0 syncs, 4447638.00 writes per sync, written: 5.57 GB, 285.01 MB/s Cumulative stall: 00:00:0.012 H:M:S, 0.1 percent Interval writes: 4447K writes, 4447K keys, 4447K commit groups, 1.0 writes per commit group, ingest: 5700.71 MB, 285.01 MB/s Interval WAL: 4447K writes, 0 syncs, 4447638.00 writes per sync, written: 5.57 MB, 285.01 MB/s Interval stall: 00:00:0.012 H:M:S, 0.1 percent ** Compaction Stats [default] ** Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Pull Request resolved: https://github.com/facebook/rocksdb/pull/4382 Differential Revision: D9933051 Pulled By: miasantreble fbshipit-source-id: 6d12bb1e4977674eea4bf2d2ac6d486b814bb2fa
6 years ago
}
}
PeriodicWorkTestScheduler* DBImpl::TEST_GetPeriodicWorkScheduler() const {
return static_cast<PeriodicWorkTestScheduler*>(periodic_work_scheduler_);
}
#endif // !ROCKSDB_LITE
size_t DBImpl::TEST_EstimateInMemoryStatsHistorySize() const {
return EstimateInMemoryStatsHistorySize();
}
} // namespace ROCKSDB_NAMESPACE
#endif // NDEBUG