You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
rocksdb/db/table_properties_collector_...

510 lines
18 KiB

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
#include "db/table_properties_collector.h"
#include <map>
#include <memory>
#include <string>
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
#include <utility>
#include <vector>
#include "db/db_impl/db_impl.h"
#include "db/dbformat.h"
#include "file/sequence_file_reader.h"
#include "file/writable_file_writer.h"
#include "options/cf_options.h"
#include "rocksdb/flush_block_policy.h"
#include "rocksdb/table.h"
#include "table/block_based/block_based_table_factory.h"
#include "table/meta_blocks.h"
#include "table/plain/plain_table_factory.h"
#include "table/table_builder.h"
#include "test_util/testharness.h"
#include "test_util/testutil.h"
#include "util/coding.h"
namespace ROCKSDB_NAMESPACE {
class TablePropertiesTest : public testing::Test,
public testing::WithParamInterface<bool> {
public:
void SetUp() override { backward_mode_ = GetParam(); }
bool backward_mode_;
};
// Utilities test functions
namespace {
static const uint32_t kTestColumnFamilyId = 66;
static const std::string kTestColumnFamilyName = "test_column_fam";
Support "level_at_creation" in TablePropertiesCollectorFactory::Context (#8919) Summary: Context: Exposing the level of the sst file (i.e, table) where it is created in `TablePropertiesCollectorFactory::Context` allows users of `TablePropertiesCollectorFactory` to customize some implementation details of `TablePropertiesCollectorFactory` and `TablePropertiesCollector` based on the level of creation. For example, `TablePropertiesCollector::NeedCompact()` can return different values based on level of creation. - Declared an extra field `level_at_creation` in `TablePropertiesCollectorFactory::Context` - Allowed `level_at_creation` to be passed in as an argument in `IntTblPropCollectorFactory::CreateIntTblPropCollector()` and `UserKeyTablePropertiesCollectorFactory::CreateIntTblPropCollector()`, the latter of which is an internal wrapper of user's passed-in `TablePropertiesCollectorFactory::CreateTablePropertiesCollector()` used in table-building process - Called `IntTblPropCollectorFactory::CreateIntTblPropCollector()` with `level_at_creation` passed into both `BlockBasedTableBuilder` and `PlainTableBuilder` - `PlainTableBuilder` previously did not capture `level_at_creation` from `TableBuilderOptions` in `PlainTableFactory`. In order for it to call the method with this parameter, this PR also made `PlainTableBuilder` capture `level_at_creation` as a required parameter - Called `IntTblPropCollectorFactory::CreateIntTblPropCollector()` with `level_at_creation` its overridden functions in its derived classes, including `RegularKeysStartWithAFactory::CreateIntTblPropCollector()` in `table_properties_collector_test.cc`, `SstFileWriterPropertiesCollectorFactory::CreateIntTblPropCollector()` in `sst_file_writer_collectors.h` Pull Request resolved: https://github.com/facebook/rocksdb/pull/8919 Test Plan: - Passed the added assertion for `context.level_at_creation` - Passed existing tests - Run `Make` to make sure adding a required parameter to `PlainTableBuilder`'s constructor does not break anything Reviewed By: anand1976 Differential Revision: D30951729 Pulled By: hx235 fbshipit-source-id: c4a0173b0d9344a4cf47e1b987d759c1c73cb474
3 years ago
static const int kTestLevel = 1;
void MakeBuilder(
const Options& options, const ImmutableOptions& ioptions,
const MutableCFOptions& moptions,
const InternalKeyComparator& internal_comparator,
const IntTblPropCollectorFactories* int_tbl_prop_collector_factories,
std::unique_ptr<WritableFileWriter>* writable,
std::unique_ptr<TableBuilder>* builder) {
std::unique_ptr<FSWritableFile> wf(new test::StringSink);
writable->reset(
new WritableFileWriter(std::move(wf), "" /* don't care */, EnvOptions()));
TableBuilderOptions tboptions(
ioptions, moptions, internal_comparator, int_tbl_prop_collector_factories,
Add more LSM info to FilterBuildingContext (#8246) Summary: Add `num_levels`, `is_bottommost`, and table file creation `reason` to `FilterBuildingContext`, in anticipation of more powerful Bloom-like filter support. To support this, added `is_bottommost` and `reason` to `TableBuilderOptions`, which allowed removing `reason` parameter from `rocksdb::BuildTable`. I attempted to remove `skip_filters` from `TableBuilderOptions`, because filter construction decisions should arise from options, not one-off parameters. I could not completely remove it because the public API for SstFileWriter takes a `skip_filters` parameter, and translating this into an option change would mean awkwardly replacing the table_factory if it is BlockBasedTableFactory with new filter_policy=nullptr option. I marked this public skip_filters option as deprecated because of this oddity. (skip_filters on the read side probably makes sense.) At least `skip_filters` is now largely hidden for users of `TableBuilderOptions` and is no longer used for implementing the optimize_filters_for_hits option. Bringing the logic for that option closer to handling of FilterBuildingContext makes it more obvious that hese two are using the same notion of "bottommost." (Planned: configuration options for Bloom-like filters that generalize `optimize_filters_for_hits`) Recommended follow-up: Try to get away from "bottommost level" naming of things, which is inaccurate (see VersionStorageInfo::RangeMightExistAfterSortedRun), and move to "bottommost run" or just "bottommost." Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246 Test Plan: extended an existing unit test to exercise and check various filter building contexts. Also, existing tests for optimize_filters_for_hits validate some of the "bottommost" handling, which is now closely connected to FilterBuildingContext::is_bottommost through TableBuilderOptions::is_bottommost Reviewed By: mrambacher Differential Revision: D28099346 Pulled By: pdillinger fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
4 years ago
options.compression, options.compression_opts, kTestColumnFamilyId,
Support "level_at_creation" in TablePropertiesCollectorFactory::Context (#8919) Summary: Context: Exposing the level of the sst file (i.e, table) where it is created in `TablePropertiesCollectorFactory::Context` allows users of `TablePropertiesCollectorFactory` to customize some implementation details of `TablePropertiesCollectorFactory` and `TablePropertiesCollector` based on the level of creation. For example, `TablePropertiesCollector::NeedCompact()` can return different values based on level of creation. - Declared an extra field `level_at_creation` in `TablePropertiesCollectorFactory::Context` - Allowed `level_at_creation` to be passed in as an argument in `IntTblPropCollectorFactory::CreateIntTblPropCollector()` and `UserKeyTablePropertiesCollectorFactory::CreateIntTblPropCollector()`, the latter of which is an internal wrapper of user's passed-in `TablePropertiesCollectorFactory::CreateTablePropertiesCollector()` used in table-building process - Called `IntTblPropCollectorFactory::CreateIntTblPropCollector()` with `level_at_creation` passed into both `BlockBasedTableBuilder` and `PlainTableBuilder` - `PlainTableBuilder` previously did not capture `level_at_creation` from `TableBuilderOptions` in `PlainTableFactory`. In order for it to call the method with this parameter, this PR also made `PlainTableBuilder` capture `level_at_creation` as a required parameter - Called `IntTblPropCollectorFactory::CreateIntTblPropCollector()` with `level_at_creation` its overridden functions in its derived classes, including `RegularKeysStartWithAFactory::CreateIntTblPropCollector()` in `table_properties_collector_test.cc`, `SstFileWriterPropertiesCollectorFactory::CreateIntTblPropCollector()` in `sst_file_writer_collectors.h` Pull Request resolved: https://github.com/facebook/rocksdb/pull/8919 Test Plan: - Passed the added assertion for `context.level_at_creation` - Passed existing tests - Run `Make` to make sure adding a required parameter to `PlainTableBuilder`'s constructor does not break anything Reviewed By: anand1976 Differential Revision: D30951729 Pulled By: hx235 fbshipit-source-id: c4a0173b0d9344a4cf47e1b987d759c1c73cb474
3 years ago
kTestColumnFamilyName, kTestLevel);
builder->reset(NewTableBuilder(tboptions, writable->get()));
}
} // namespace
// Collects keys that starts with "A" in a table.
class RegularKeysStartWithA : public TablePropertiesCollector {
public:
const char* Name() const override { return "RegularKeysStartWithA"; }
Status Finish(UserCollectedProperties* properties) override {
std::string encoded;
std::string encoded_num_puts;
std::string encoded_num_deletes;
std::string encoded_num_single_deletes;
std::string encoded_num_size_changes;
PutVarint32(&encoded, count_);
PutVarint32(&encoded_num_puts, num_puts_);
PutVarint32(&encoded_num_deletes, num_deletes_);
PutVarint32(&encoded_num_single_deletes, num_single_deletes_);
PutVarint32(&encoded_num_size_changes, num_size_changes_);
*properties = UserCollectedProperties{
{"TablePropertiesTest", message_},
{"Count", encoded},
{"NumPuts", encoded_num_puts},
{"NumDeletes", encoded_num_deletes},
{"NumSingleDeletes", encoded_num_single_deletes},
{"NumSizeChanges", encoded_num_size_changes},
};
return Status::OK();
}
Status AddUserKey(const Slice& user_key, const Slice& /*value*/,
EntryType type, SequenceNumber /*seq*/,
uint64_t file_size) override {
// simply asssume all user keys are not empty.
if (user_key.data()[0] == 'A') {
++count_;
}
if (type == kEntryPut) {
num_puts_++;
} else if (type == kEntryDelete) {
num_deletes_++;
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
} else if (type == kEntrySingleDelete) {
num_single_deletes_++;
}
if (file_size < file_size_) {
message_ = "File size should not decrease.";
} else if (file_size != file_size_) {
num_size_changes_++;
}
return Status::OK();
}
UserCollectedProperties GetReadableProperties() const override {
return UserCollectedProperties{};
}
private:
std::string message_ = "Rocksdb";
uint32_t count_ = 0;
uint32_t num_puts_ = 0;
uint32_t num_deletes_ = 0;
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
uint32_t num_single_deletes_ = 0;
uint32_t num_size_changes_ = 0;
uint64_t file_size_ = 0;
};
// Collects keys that starts with "A" in a table. Backward compatible mode
// It is also used to test internal key table property collector
class RegularKeysStartWithABackwardCompatible
: public TablePropertiesCollector {
public:
const char* Name() const override { return "RegularKeysStartWithA"; }
Status Finish(UserCollectedProperties* properties) override {
std::string encoded;
PutVarint32(&encoded, count_);
*properties = UserCollectedProperties{{"TablePropertiesTest", "Rocksdb"},
{"Count", encoded}};
return Status::OK();
}
Status Add(const Slice& user_key, const Slice& /*value*/) override {
// simply asssume all user keys are not empty.
if (user_key.data()[0] == 'A') {
++count_;
}
return Status::OK();
}
UserCollectedProperties GetReadableProperties() const override {
return UserCollectedProperties{};
}
private:
uint32_t count_ = 0;
};
class RegularKeysStartWithAInternal : public IntTblPropCollector {
public:
const char* Name() const override { return "RegularKeysStartWithA"; }
Status Finish(UserCollectedProperties* properties) override {
std::string encoded;
PutVarint32(&encoded, count_);
*properties = UserCollectedProperties{{"TablePropertiesTest", "Rocksdb"},
{"Count", encoded}};
return Status::OK();
}
Status InternalAdd(const Slice& user_key, const Slice& /*value*/,
uint64_t /*file_size*/) override {
// simply asssume all user keys are not empty.
if (user_key.data()[0] == 'A') {
++count_;
}
return Status::OK();
}
Refactor to avoid confusing "raw block" (#10408) Summary: We have a lot of confusing code because of mixed, sometimes completely opposite uses of of the term "raw block" or "raw contents", sometimes within the same source file. For example, in `BlockBasedTableBuilder`, `raw_block_contents` and `raw_size` generally referred to uncompressed block contents and size, while `WriteRawBlock` referred to writing a block that is already compressed if it is going to be. Meanwhile, in `BlockBasedTable`, `raw_block_contents` either referred to a (maybe compressed) block with trailer, or a maybe compressed block maybe without trailer. (Note: left as follow-up work to use C++ typing to better sort out the various kinds of BlockContents.) This change primarily tries to apply some consistent terminology around the kinds of block representations, avoiding the unclear "raw". (Any meaning of "raw" assumes some bias toward the storage layer or toward the logical data layer.) Preferred terminology: * **Serialized block** - bytes that go into storage. For block-based table (usually the case) this includes the block trailer. WART: block `size` may or may not include the trailer; need to be clear about whether it does or not. * **Maybe compressed block** - like a serialized block, but without the trailer (or no promise of including a trailer). Must be accompanied by a CompressionType. * **Uncompressed block** - "payload" bytes that are either stored with no compression, used as input to compression function, or result of decompression function. * **Parsed block** - an in-memory form of a block in block cache, as it is used by the table reader. Different C++ types are used depending on the block type (see block_like_traits.h). Other refactorings: * Misc corrections/improvements of internal API comments * Remove a few misleading / unhelpful / redundant comments. * Use move semantics in some places to simplify contracts * Use better parameter names to indicate which parameters are used for outputs * Remove some extraneous `extern` * Various clean-ups to `CacheDumperImpl` (mostly unnecessary code) Pull Request resolved: https://github.com/facebook/rocksdb/pull/10408 Test Plan: existing tests Reviewed By: akankshamahajan15 Differential Revision: D38172617 Pulled By: pdillinger fbshipit-source-id: ccb99299f324ac5ca46996d34c5089621a4f260c
2 years ago
void BlockAdd(uint64_t /* block_uncomp_bytes */,
uint64_t /* block_compressed_bytes_fast */,
uint64_t /* block_compressed_bytes_slow */) override {
// Nothing to do.
return;
}
UserCollectedProperties GetReadableProperties() const override {
return UserCollectedProperties{};
}
private:
uint32_t count_ = 0;
};
class RegularKeysStartWithAFactory : public IntTblPropCollectorFactory,
public TablePropertiesCollectorFactory {
TablePropertiesCollectorFactory Summary: This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options. Here's description of task #4296714: I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB. For example, this table has 3155 entries and 1391828 deleted keys. The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for. Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API. In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe. Test Plan: Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one). Also, all other tests Reviewers: sdong, dhruba, haobo, kailiu Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D18579
11 years ago
public:
explicit RegularKeysStartWithAFactory(bool backward_mode)
: backward_mode_(backward_mode) {}
TablePropertiesCollector* CreateTablePropertiesCollector(
TablePropertiesCollectorFactory::Context context) override {
EXPECT_EQ(kTestColumnFamilyId, context.column_family_id);
Support "level_at_creation" in TablePropertiesCollectorFactory::Context (#8919) Summary: Context: Exposing the level of the sst file (i.e, table) where it is created in `TablePropertiesCollectorFactory::Context` allows users of `TablePropertiesCollectorFactory` to customize some implementation details of `TablePropertiesCollectorFactory` and `TablePropertiesCollector` based on the level of creation. For example, `TablePropertiesCollector::NeedCompact()` can return different values based on level of creation. - Declared an extra field `level_at_creation` in `TablePropertiesCollectorFactory::Context` - Allowed `level_at_creation` to be passed in as an argument in `IntTblPropCollectorFactory::CreateIntTblPropCollector()` and `UserKeyTablePropertiesCollectorFactory::CreateIntTblPropCollector()`, the latter of which is an internal wrapper of user's passed-in `TablePropertiesCollectorFactory::CreateTablePropertiesCollector()` used in table-building process - Called `IntTblPropCollectorFactory::CreateIntTblPropCollector()` with `level_at_creation` passed into both `BlockBasedTableBuilder` and `PlainTableBuilder` - `PlainTableBuilder` previously did not capture `level_at_creation` from `TableBuilderOptions` in `PlainTableFactory`. In order for it to call the method with this parameter, this PR also made `PlainTableBuilder` capture `level_at_creation` as a required parameter - Called `IntTblPropCollectorFactory::CreateIntTblPropCollector()` with `level_at_creation` its overridden functions in its derived classes, including `RegularKeysStartWithAFactory::CreateIntTblPropCollector()` in `table_properties_collector_test.cc`, `SstFileWriterPropertiesCollectorFactory::CreateIntTblPropCollector()` in `sst_file_writer_collectors.h` Pull Request resolved: https://github.com/facebook/rocksdb/pull/8919 Test Plan: - Passed the added assertion for `context.level_at_creation` - Passed existing tests - Run `Make` to make sure adding a required parameter to `PlainTableBuilder`'s constructor does not break anything Reviewed By: anand1976 Differential Revision: D30951729 Pulled By: hx235 fbshipit-source-id: c4a0173b0d9344a4cf47e1b987d759c1c73cb474
3 years ago
EXPECT_EQ(kTestLevel, context.level_at_creation);
if (!backward_mode_) {
return new RegularKeysStartWithA();
} else {
return new RegularKeysStartWithABackwardCompatible();
}
}
IntTblPropCollector* CreateIntTblPropCollector(
Support "level_at_creation" in TablePropertiesCollectorFactory::Context (#8919) Summary: Context: Exposing the level of the sst file (i.e, table) where it is created in `TablePropertiesCollectorFactory::Context` allows users of `TablePropertiesCollectorFactory` to customize some implementation details of `TablePropertiesCollectorFactory` and `TablePropertiesCollector` based on the level of creation. For example, `TablePropertiesCollector::NeedCompact()` can return different values based on level of creation. - Declared an extra field `level_at_creation` in `TablePropertiesCollectorFactory::Context` - Allowed `level_at_creation` to be passed in as an argument in `IntTblPropCollectorFactory::CreateIntTblPropCollector()` and `UserKeyTablePropertiesCollectorFactory::CreateIntTblPropCollector()`, the latter of which is an internal wrapper of user's passed-in `TablePropertiesCollectorFactory::CreateTablePropertiesCollector()` used in table-building process - Called `IntTblPropCollectorFactory::CreateIntTblPropCollector()` with `level_at_creation` passed into both `BlockBasedTableBuilder` and `PlainTableBuilder` - `PlainTableBuilder` previously did not capture `level_at_creation` from `TableBuilderOptions` in `PlainTableFactory`. In order for it to call the method with this parameter, this PR also made `PlainTableBuilder` capture `level_at_creation` as a required parameter - Called `IntTblPropCollectorFactory::CreateIntTblPropCollector()` with `level_at_creation` its overridden functions in its derived classes, including `RegularKeysStartWithAFactory::CreateIntTblPropCollector()` in `table_properties_collector_test.cc`, `SstFileWriterPropertiesCollectorFactory::CreateIntTblPropCollector()` in `sst_file_writer_collectors.h` Pull Request resolved: https://github.com/facebook/rocksdb/pull/8919 Test Plan: - Passed the added assertion for `context.level_at_creation` - Passed existing tests - Run `Make` to make sure adding a required parameter to `PlainTableBuilder`'s constructor does not break anything Reviewed By: anand1976 Differential Revision: D30951729 Pulled By: hx235 fbshipit-source-id: c4a0173b0d9344a4cf47e1b987d759c1c73cb474
3 years ago
uint32_t /*column_family_id*/, int /* level_at_creation */) override {
return new RegularKeysStartWithAInternal();
TablePropertiesCollectorFactory Summary: This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options. Here's description of task #4296714: I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB. For example, this table has 3155 entries and 1391828 deleted keys. The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for. Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API. In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe. Test Plan: Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one). Also, all other tests Reviewers: sdong, dhruba, haobo, kailiu Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D18579
11 years ago
}
const char* Name() const override { return "RegularKeysStartWithA"; }
bool backward_mode_;
};
class FlushBlockEveryThreePolicy : public FlushBlockPolicy {
public:
bool Update(const Slice& /*key*/, const Slice& /*value*/) override {
return (++count_ % 3U == 0);
}
private:
uint64_t count_ = 0;
};
class FlushBlockEveryThreePolicyFactory : public FlushBlockPolicyFactory {
public:
explicit FlushBlockEveryThreePolicyFactory() {}
const char* Name() const override {
return "FlushBlockEveryThreePolicyFactory";
}
FlushBlockPolicy* NewFlushBlockPolicy(
const BlockBasedTableOptions& /*table_options*/,
const BlockBuilder& /*data_block_builder*/) const override {
return new FlushBlockEveryThreePolicy;
}
TablePropertiesCollectorFactory Summary: This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options. Here's description of task #4296714: I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB. For example, this table has 3155 entries and 1391828 deleted keys. The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for. Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API. In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe. Test Plan: Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one). Also, all other tests Reviewers: sdong, dhruba, haobo, kailiu Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D18579
11 years ago
};
extern const uint64_t kBlockBasedTableMagicNumber;
extern const uint64_t kPlainTableMagicNumber;
namespace {
void TestCustomizedTablePropertiesCollector(
bool backward_mode, uint64_t magic_number, bool test_int_tbl_prop_collector,
const Options& options, const InternalKeyComparator& internal_comparator) {
// make sure the entries will be inserted with order.
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
std::map<std::pair<std::string, ValueType>, std::string> kvs = {
{{"About ", kTypeValue}, "val5"}, // starts with 'A'
{{"Abstract", kTypeValue}, "val2"}, // starts with 'A'
{{"Around ", kTypeValue}, "val7"}, // starts with 'A'
{{"Beyond ", kTypeValue}, "val3"},
{{"Builder ", kTypeValue}, "val1"},
{{"Love ", kTypeDeletion}, ""},
{{"Cancel ", kTypeValue}, "val4"},
{{"Find ", kTypeValue}, "val6"},
{{"Rocks ", kTypeDeletion}, ""},
{{"Foo ", kTypeSingleDeletion}, ""},
};
// -- Step 1: build table
std::unique_ptr<TableBuilder> builder;
std::unique_ptr<WritableFileWriter> writer;
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
IntTblPropCollectorFactories int_tbl_prop_collector_factories;
if (test_int_tbl_prop_collector) {
int_tbl_prop_collector_factories.emplace_back(
new RegularKeysStartWithAFactory(backward_mode));
} else {
GetIntTblPropCollectorFactory(ioptions, &int_tbl_prop_collector_factories);
}
MakeBuilder(options, ioptions, moptions, internal_comparator,
&int_tbl_prop_collector_factories, &writer, &builder);
SequenceNumber seqNum = 0U;
for (const auto& kv : kvs) {
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
InternalKey ikey(kv.first.first, seqNum++, kv.first.second);
builder->Add(ikey.Encode(), kv.second);
}
ASSERT_OK(builder->Finish());
ASSERT_OK(writer->Flush());
// -- Step 2: Read properties
test::StringSink* fwf =
static_cast<test::StringSink*>(writer->writable_file());
std::unique_ptr<FSRandomAccessFile> source(
new test::StringSource(fwf->contents()));
std::unique_ptr<RandomAccessFileReader> fake_file_reader(
new RandomAccessFileReader(std::move(source), "test"));
Improve / clean up meta block code & integrity (#9163) Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
3 years ago
std::unique_ptr<TableProperties> props;
Status s = ReadTableProperties(fake_file_reader.get(), fwf->contents().size(),
Improve / clean up meta block code & integrity (#9163) Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
3 years ago
magic_number, ioptions, &props);
ASSERT_OK(s);
auto user_collected = props->user_collected_properties;
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
ASSERT_NE(user_collected.find("TablePropertiesTest"), user_collected.end());
ASSERT_EQ("Rocksdb", user_collected.at("TablePropertiesTest"));
uint32_t starts_with_A = 0;
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
ASSERT_NE(user_collected.find("Count"), user_collected.end());
Slice key(user_collected.at("Count"));
ASSERT_TRUE(GetVarint32(&key, &starts_with_A));
ASSERT_EQ(3u, starts_with_A);
if (!backward_mode && !test_int_tbl_prop_collector) {
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
uint32_t num_puts;
ASSERT_NE(user_collected.find("NumPuts"), user_collected.end());
Slice key_puts(user_collected.at("NumPuts"));
ASSERT_TRUE(GetVarint32(&key_puts, &num_puts));
ASSERT_EQ(7u, num_puts);
uint32_t num_deletes;
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
ASSERT_NE(user_collected.find("NumDeletes"), user_collected.end());
Slice key_deletes(user_collected.at("NumDeletes"));
ASSERT_TRUE(GetVarint32(&key_deletes, &num_deletes));
ASSERT_EQ(2u, num_deletes);
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
uint32_t num_single_deletes;
ASSERT_NE(user_collected.find("NumSingleDeletes"), user_collected.end());
Slice key_single_deletes(user_collected.at("NumSingleDeletes"));
ASSERT_TRUE(GetVarint32(&key_single_deletes, &num_single_deletes));
ASSERT_EQ(1u, num_single_deletes);
uint32_t num_size_changes;
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
ASSERT_NE(user_collected.find("NumSizeChanges"), user_collected.end());
Slice key_size_changes(user_collected.at("NumSizeChanges"));
ASSERT_TRUE(GetVarint32(&key_size_changes, &num_size_changes));
ASSERT_GE(num_size_changes, 2u);
}
}
} // namespace
TEST_P(TablePropertiesTest, CustomizedTablePropertiesCollector) {
// Test properties collectors with internal keys or regular keys
// for block based table
for (bool encode_as_internal : {true, false}) {
Options options;
BlockBasedTableOptions table_options;
table_options.flush_block_policy_factory =
std::make_shared<FlushBlockEveryThreePolicyFactory>();
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
test::PlainInternalKeyComparator ikc(options.comparator);
std::shared_ptr<TablePropertiesCollectorFactory> collector_factory(
new RegularKeysStartWithAFactory(backward_mode_));
options.table_properties_collector_factories.resize(1);
options.table_properties_collector_factories[0] = collector_factory;
TestCustomizedTablePropertiesCollector(backward_mode_,
kBlockBasedTableMagicNumber,
encode_as_internal, options, ikc);
// test plain table
PlainTableOptions plain_table_options;
plain_table_options.user_key_len = 8;
plain_table_options.bloom_bits_per_key = 8;
plain_table_options.hash_table_ratio = 0;
options.table_factory =
std::make_shared<PlainTableFactory>(plain_table_options);
TestCustomizedTablePropertiesCollector(backward_mode_,
kPlainTableMagicNumber,
encode_as_internal, options, ikc);
}
}
namespace {
void TestInternalKeyPropertiesCollector(
bool backward_mode, uint64_t magic_number, bool sanitized,
std::shared_ptr<TableFactory> table_factory) {
InternalKey keys[] = {
InternalKey("A ", 0, ValueType::kTypeValue),
InternalKey("B ", 1, ValueType::kTypeValue),
InternalKey("C ", 2, ValueType::kTypeValue),
InternalKey("W ", 3, ValueType::kTypeDeletion),
InternalKey("X ", 4, ValueType::kTypeDeletion),
InternalKey("Y ", 5, ValueType::kTypeDeletion),
InternalKey("Z ", 6, ValueType::kTypeDeletion),
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
InternalKey("a ", 7, ValueType::kTypeSingleDeletion),
InternalKey("b ", 8, ValueType::kTypeMerge),
InternalKey("c ", 9, ValueType::kTypeMerge),
};
std::unique_ptr<TableBuilder> builder;
std::unique_ptr<WritableFileWriter> writable;
Options options;
test::PlainInternalKeyComparator pikc(options.comparator);
IntTblPropCollectorFactories int_tbl_prop_collector_factories;
options.table_factory = table_factory;
if (sanitized) {
TablePropertiesCollectorFactory Summary: This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options. Here's description of task #4296714: I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB. For example, this table has 3155 entries and 1391828 deleted keys. The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for. Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API. In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe. Test Plan: Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one). Also, all other tests Reviewers: sdong, dhruba, haobo, kailiu Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D18579
11 years ago
options.table_properties_collector_factories.emplace_back(
new RegularKeysStartWithAFactory(backward_mode));
// with sanitization, even regular properties collector will be able to
// handle internal keys.
auto comparator = options.comparator;
// HACK: Set options.info_log to avoid writing log in
// SanitizeOptions().
options.info_log = std::make_shared<test::NullLogger>();
options = SanitizeOptions("db", // just a place holder
options);
ImmutableOptions ioptions(options);
GetIntTblPropCollectorFactory(ioptions, &int_tbl_prop_collector_factories);
options.comparator = comparator;
}
const ImmutableOptions ioptions(options);
MutableCFOptions moptions(options);
TablePropertiesCollectorFactory Summary: This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options. Here's description of task #4296714: I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB. For example, this table has 3155 entries and 1391828 deleted keys. The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for. Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API. In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe. Test Plan: Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one). Also, all other tests Reviewers: sdong, dhruba, haobo, kailiu Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D18579
11 years ago
for (int iter = 0; iter < 2; ++iter) {
MakeBuilder(options, ioptions, moptions, pikc,
&int_tbl_prop_collector_factories, &writable, &builder);
TablePropertiesCollectorFactory Summary: This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options. Here's description of task #4296714: I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB. For example, this table has 3155 entries and 1391828 deleted keys. The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for. Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API. In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe. Test Plan: Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one). Also, all other tests Reviewers: sdong, dhruba, haobo, kailiu Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D18579
11 years ago
for (const auto& k : keys) {
builder->Add(k.Encode(), "val");
}
TablePropertiesCollectorFactory Summary: This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options. Here's description of task #4296714: I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB. For example, this table has 3155 entries and 1391828 deleted keys. The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for. Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API. In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe. Test Plan: Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one). Also, all other tests Reviewers: sdong, dhruba, haobo, kailiu Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D18579
11 years ago
ASSERT_OK(builder->Finish());
ASSERT_OK(writable->Flush());
TablePropertiesCollectorFactory Summary: This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options. Here's description of task #4296714: I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB. For example, this table has 3155 entries and 1391828 deleted keys. The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for. Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API. In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe. Test Plan: Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one). Also, all other tests Reviewers: sdong, dhruba, haobo, kailiu Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D18579
11 years ago
test::StringSink* fwf =
static_cast<test::StringSink*>(writable->writable_file());
std::unique_ptr<FSRandomAccessFile> source(
new test::StringSource(fwf->contents()));
std::unique_ptr<RandomAccessFileReader> reader(
new RandomAccessFileReader(std::move(source), "test"));
Improve / clean up meta block code & integrity (#9163) Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
3 years ago
std::unique_ptr<TableProperties> props;
Status s = ReadTableProperties(reader.get(), fwf->contents().size(),
magic_number, ioptions, &props);
TablePropertiesCollectorFactory Summary: This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options. Here's description of task #4296714: I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB. For example, this table has 3155 entries and 1391828 deleted keys. The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for. Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API. In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe. Test Plan: Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one). Also, all other tests Reviewers: sdong, dhruba, haobo, kailiu Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D18579
11 years ago
ASSERT_OK(s);
auto user_collected = props->user_collected_properties;
uint64_t deleted = GetDeletedKeys(user_collected);
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
ASSERT_EQ(5u, deleted); // deletes + single-deletes
TablePropertiesCollectorFactory Summary: This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options. Here's description of task #4296714: I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB. For example, this table has 3155 entries and 1391828 deleted keys. The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for. Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API. In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe. Test Plan: Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one). Also, all other tests Reviewers: sdong, dhruba, haobo, kailiu Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D18579
11 years ago
bool property_present;
uint64_t merges = GetMergeOperands(user_collected, &property_present);
ASSERT_TRUE(property_present);
ASSERT_EQ(2u, merges);
TablePropertiesCollectorFactory Summary: This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options. Here's description of task #4296714: I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB. For example, this table has 3155 entries and 1391828 deleted keys. The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for. Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API. In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe. Test Plan: Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one). Also, all other tests Reviewers: sdong, dhruba, haobo, kailiu Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D18579
11 years ago
if (sanitized) {
uint32_t starts_with_A = 0;
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
ASSERT_NE(user_collected.find("Count"), user_collected.end());
TablePropertiesCollectorFactory Summary: This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options. Here's description of task #4296714: I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB. For example, this table has 3155 entries and 1391828 deleted keys. The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for. Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API. In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe. Test Plan: Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one). Also, all other tests Reviewers: sdong, dhruba, haobo, kailiu Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D18579
11 years ago
Slice key(user_collected.at("Count"));
ASSERT_TRUE(GetVarint32(&key, &starts_with_A));
ASSERT_EQ(1u, starts_with_A);
if (!backward_mode) {
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
uint32_t num_puts;
ASSERT_NE(user_collected.find("NumPuts"), user_collected.end());
Slice key_puts(user_collected.at("NumPuts"));
ASSERT_TRUE(GetVarint32(&key_puts, &num_puts));
ASSERT_EQ(3u, num_puts);
uint32_t num_deletes;
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
ASSERT_NE(user_collected.find("NumDeletes"), user_collected.end());
Slice key_deletes(user_collected.at("NumDeletes"));
ASSERT_TRUE(GetVarint32(&key_deletes, &num_deletes));
ASSERT_EQ(4u, num_deletes);
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
uint32_t num_single_deletes;
ASSERT_NE(user_collected.find("NumSingleDeletes"),
user_collected.end());
Slice key_single_deletes(user_collected.at("NumSingleDeletes"));
ASSERT_TRUE(GetVarint32(&key_single_deletes, &num_single_deletes));
ASSERT_EQ(1u, num_single_deletes);
}
TablePropertiesCollectorFactory Summary: This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options. Here's description of task #4296714: I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB. For example, this table has 3155 entries and 1391828 deleted keys. The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for. Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API. In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe. Test Plan: Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one). Also, all other tests Reviewers: sdong, dhruba, haobo, kailiu Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D18579
11 years ago
}
}
}
} // namespace
TEST_P(TablePropertiesTest, InternalKeyPropertiesCollector) {
TestInternalKeyPropertiesCollector(
backward_mode_, kBlockBasedTableMagicNumber, true /* sanitize */,
std::make_shared<BlockBasedTableFactory>());
if (backward_mode_) {
TestInternalKeyPropertiesCollector(
backward_mode_, kBlockBasedTableMagicNumber, false /* not sanitize */,
std::make_shared<BlockBasedTableFactory>());
}
PlainTableOptions plain_table_options;
plain_table_options.user_key_len = 8;
plain_table_options.bloom_bits_per_key = 8;
plain_table_options.hash_table_ratio = 0;
TestInternalKeyPropertiesCollector(
backward_mode_, kPlainTableMagicNumber, false /* not sanitize */,
std::make_shared<PlainTableFactory>(plain_table_options));
}
INSTANTIATE_TEST_CASE_P(InternalKeyPropertiesCollector, TablePropertiesTest,
::testing::Bool());
INSTANTIATE_TEST_CASE_P(CustomizedTablePropertiesCollector, TablePropertiesTest,
::testing::Bool());
} // namespace ROCKSDB_NAMESPACE
int main(int argc, char** argv) {
ROCKSDB_NAMESPACE::port::InstallStackTraceHandler();
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
10 years ago
::testing::InitGoogleTest(&argc, argv);
return RUN_ALL_TESTS();
}