You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
rocksdb/util/murmurhash.cc

192 lines
4.3 KiB

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
/*
Murmurhash from http://sites.google.com/site/murmurhash/
Optimize for serial commits in 2PC Summary: Throughput: 46k tps in our sysbench settings (filling the details later) The idea is to have the simplest change that gives us a reasonable boost in 2PC throughput. Major design changes: 1. The WAL file internal buffer is not flushed after each write. Instead it is flushed before critical operations (WAL copy via fs) or when FlushWAL is called by MySQL. Flushing the WAL buffer is also protected via mutex_. 2. Use two sequence numbers: last seq, and last seq for write. Last seq is the last visible sequence number for reads. Last seq for write is the next sequence number that should be used to write to WAL/memtable. This allows to have a memtable write be in parallel to WAL writes. 3. BatchGroup is not used for writes. This means that we can have parallel writers which changes a major assumption in the code base. To accommodate for that i) allow only 1 WriteImpl that intends to write to memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes come via group commit phase which is serial anyway, ii) make all the parts in the code base that assumed to be the only writer (via EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are protected via a stat_mutex_. Note: the first commit has the approach figured out but is not clean. Submitting the PR anyway to get the early feedback on the approach. If we are ok with the approach I will go ahead with this updates: 0) Rebase with Yi's pipelining changes 1) Currently batching is disabled by default to make sure that it will be consistent with all unit tests. Will make this optional via a config. 2) A couple of unit tests are disabled. They need to be updated with the serial commit of 2PC taken into account. 3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires releasing mutex_ beforehand (the same way EnterUnbatched does). This needs to be cleaned up. Closes https://github.com/facebook/rocksdb/pull/2345 Differential Revision: D5210732 Pulled By: maysamyabandeh fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
7 years ago
All code is released to the public domain. For business purposes, Murmurhash
is under the MIT license.
*/
#include "murmurhash.h"
#include "port/lang.h"
#if defined(__x86_64__)
// -------------------------------------------------------------------
//
// The same caveats as 32-bit MurmurHash2 apply here - beware of alignment
// and endian-ness issues if used across multiple platforms.
//
// 64-bit hash for 64-bit platforms
#ifdef ROCKSDB_UBSAN_RUN
#if defined(__clang__)
__attribute__((__no_sanitize__("alignment")))
#elif defined(__GNUC__)
__attribute__((__no_sanitize_undefined__))
#endif
#endif
uint64_t MurmurHash64A ( const void * key, int len, unsigned int seed )
{
const uint64_t m = 0xc6a4a7935bd1e995;
const int r = 47;
uint64_t h = seed ^ (len * m);
const uint64_t * data = (const uint64_t *)key;
const uint64_t * end = data + (len/8);
while(data != end)
{
uint64_t k = *data++;
k *= m;
k ^= k >> r;
k *= m;
h ^= k;
h *= m;
}
const unsigned char * data2 = (const unsigned char*)data;
switch(len & 7)
{
case 7: h ^= ((uint64_t)data2[6]) << 48; FALLTHROUGH_INTENDED;
case 6: h ^= ((uint64_t)data2[5]) << 40; FALLTHROUGH_INTENDED;
case 5: h ^= ((uint64_t)data2[4]) << 32; FALLTHROUGH_INTENDED;
case 4: h ^= ((uint64_t)data2[3]) << 24; FALLTHROUGH_INTENDED;
case 3: h ^= ((uint64_t)data2[2]) << 16; FALLTHROUGH_INTENDED;
case 2: h ^= ((uint64_t)data2[1]) << 8; FALLTHROUGH_INTENDED;
case 1: h ^= ((uint64_t)data2[0]);
h *= m;
};
h ^= h >> r;
h *= m;
h ^= h >> r;
return h;
}
#elif defined(__i386__)
// -------------------------------------------------------------------
//
// Note - This code makes a few assumptions about how your machine behaves -
//
// 1. We can read a 4-byte value from any address without crashing
// 2. sizeof(int) == 4
//
// And it has a few limitations -
//
// 1. It will not work incrementally.
// 2. It will not produce the same results on little-endian and big-endian
// machines.
unsigned int MurmurHash2 ( const void * key, int len, unsigned int seed )
{
// 'm' and 'r' are mixing constants generated offline.
// They're not really 'magic', they just happen to work well.
const unsigned int m = 0x5bd1e995;
const int r = 24;
// Initialize the hash to a 'random' value
unsigned int h = seed ^ len;
// Mix 4 bytes at a time into the hash
const unsigned char * data = (const unsigned char *)key;
while(len >= 4)
{
unsigned int k = *(unsigned int *)data;
k *= m;
k ^= k >> r;
k *= m;
h *= m;
h ^= k;
data += 4;
len -= 4;
}
// Handle the last few bytes of the input array
switch(len)
{
case 3: h ^= data[2] << 16; FALLTHROUGH_INTENDED;
case 2: h ^= data[1] << 8; FALLTHROUGH_INTENDED;
case 1: h ^= data[0];
h *= m;
};
// Do a few final mixes of the hash to ensure the last few
// bytes are well-incorporated.
h ^= h >> 13;
h *= m;
h ^= h >> 15;
return h;
}
#else
// -------------------------------------------------------------------
//
// Same as MurmurHash2, but endian- and alignment-neutral.
// Half the speed though, alas.
unsigned int MurmurHashNeutral2 ( const void * key, int len, unsigned int seed )
{
const unsigned int m = 0x5bd1e995;
const int r = 24;
unsigned int h = seed ^ len;
const unsigned char * data = (const unsigned char *)key;
while(len >= 4)
{
unsigned int k;
k = data[0];
k |= data[1] << 8;
k |= data[2] << 16;
k |= data[3] << 24;
k *= m;
k ^= k >> r;
k *= m;
h *= m;
h ^= k;
data += 4;
len -= 4;
}
switch(len)
{
case 3: h ^= data[2] << 16; FALLTHROUGH_INTENDED;
case 2: h ^= data[1] << 8; FALLTHROUGH_INTENDED;
case 1: h ^= data[0];
h *= m;
};
h ^= h >> 13;
h *= m;
h ^= h >> 15;
return h;
}
#endif