|
|
|
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
|
|
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
|
|
// (found in the LICENSE.Apache file in the root directory).
|
|
|
|
//
|
|
|
|
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
|
|
|
|
// Use of this source code is governed by a BSD-style license that can be
|
|
|
|
// found in the LICENSE file. See the AUTHORS file for names of contributors.
|
|
|
|
//
|
|
|
|
|
|
|
|
#pragma once
|
Use deleters to label cache entries and collect stats (#8297)
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
4 years ago
|
|
|
|
|
|
|
#include <map>
|
Use deleters to label cache entries and collect stats (#8297)
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
4 years ago
|
|
|
#include <memory>
|
|
|
|
#include <string>
|
|
|
|
#include <vector>
|
|
|
|
|
Use deleters to label cache entries and collect stats (#8297)
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
4 years ago
|
|
|
#include "cache/cache_entry_roles.h"
|
|
|
|
#include "db/version_set.h"
|
|
|
|
#include "rocksdb/system_clock.h"
|
|
|
|
|
|
|
|
class ColumnFamilyData;
|
|
|
|
|
|
|
|
namespace ROCKSDB_NAMESPACE {
|
|
|
|
|
|
|
|
template <class Stats>
|
|
|
|
class CacheEntryStatsCollector;
|
|
|
|
class DBImpl;
|
Skip deleted WALs during recovery
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
7 years ago
|
|
|
class MemTableList;
|
|
|
|
|
Eliminate duplicated property constants
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
9 years ago
|
|
|
// Config for retrieving a property's value.
|
|
|
|
struct DBPropertyInfo {
|
|
|
|
bool need_out_of_mutex;
|
|
|
|
|
|
|
|
// gcc had an internal error for initializing union of pointer-to-member-
|
|
|
|
// functions. Workaround is to populate exactly one of the following function
|
|
|
|
// pointers with a non-nullptr value.
|
|
|
|
|
|
|
|
// @param value Value-result argument for storing the property's string value
|
|
|
|
// @param suffix Argument portion of the property. For example, suffix would
|
|
|
|
// be "5" for the property "rocksdb.num-files-at-level5". So far, only
|
|
|
|
// certain string properties take an argument.
|
|
|
|
bool (InternalStats::*handle_string)(std::string* value, Slice suffix);
|
|
|
|
|
|
|
|
// @param value Value-result argument for storing the property's uint64 value
|
|
|
|
// @param db Many of the int properties rely on DBImpl methods.
|
|
|
|
// @param version Version is needed in case the property is retrieved without
|
|
|
|
// holding db mutex, which is only supported for int properties.
|
|
|
|
bool (InternalStats::*handle_int)(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
|
|
|
|
|
|
|
// @param props Map of general properties to populate
|
|
|
|
// @param suffix Argument portion of the property. (see handle_string)
|
|
|
|
bool (InternalStats::*handle_map)(std::map<std::string, std::string>* props,
|
|
|
|
Slice suffix);
|
|
|
|
|
|
|
|
// handle the string type properties rely on DBImpl methods
|
|
|
|
// @param value Value-result argument for storing the property's string value
|
|
|
|
bool (DBImpl::*handle_string_dbimpl)(std::string* value);
|
|
|
|
};
|
|
|
|
|
Eliminate duplicated property constants
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
9 years ago
|
|
|
extern const DBPropertyInfo* GetPropertyInfo(const Slice& property);
|
|
|
|
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
|
|
#undef SCORE
|
|
|
|
enum class LevelStatType {
|
|
|
|
INVALID = 0,
|
|
|
|
NUM_FILES,
|
|
|
|
COMPACTED_FILES,
|
|
|
|
SIZE_BYTES,
|
|
|
|
SCORE,
|
|
|
|
READ_GB,
|
|
|
|
RN_GB,
|
|
|
|
RNP1_GB,
|
|
|
|
WRITE_GB,
|
|
|
|
W_NEW_GB,
|
|
|
|
MOVED_GB,
|
|
|
|
WRITE_AMP,
|
|
|
|
READ_MBPS,
|
|
|
|
WRITE_MBPS,
|
|
|
|
COMP_SEC,
|
|
|
|
COMP_CPU_SEC,
|
|
|
|
COMP_COUNT,
|
|
|
|
AVG_SEC,
|
|
|
|
KEY_IN,
|
|
|
|
KEY_DROP,
|
|
|
|
R_BLOB_GB,
|
|
|
|
W_BLOB_GB,
|
|
|
|
TOTAL // total number of types
|
|
|
|
};
|
|
|
|
|
|
|
|
struct LevelStat {
|
|
|
|
// This what will be L?.property_name in the flat map returned to the user
|
|
|
|
std::string property_name;
|
|
|
|
// This will be what we will print in the header in the cli
|
|
|
|
std::string header_name;
|
|
|
|
};
|
|
|
|
|
|
|
|
class InternalStats {
|
|
|
|
public:
|
|
|
|
static const std::map<LevelStatType, LevelStat> compaction_level_stats;
|
|
|
|
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
enum InternalCFStatsType {
|
|
|
|
L0_FILE_COUNT_LIMIT_SLOWDOWNS,
|
|
|
|
LOCKED_L0_FILE_COUNT_LIMIT_SLOWDOWNS,
|
|
|
|
MEMTABLE_LIMIT_STOPS,
|
|
|
|
MEMTABLE_LIMIT_SLOWDOWNS,
|
|
|
|
L0_FILE_COUNT_LIMIT_STOPS,
|
|
|
|
LOCKED_L0_FILE_COUNT_LIMIT_STOPS,
|
|
|
|
PENDING_COMPACTION_BYTES_LIMIT_SLOWDOWNS,
|
|
|
|
PENDING_COMPACTION_BYTES_LIMIT_STOPS,
|
|
|
|
WRITE_STALLS_ENUM_MAX,
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
BYTES_FLUSHED,
|
|
|
|
BYTES_INGESTED_ADD_FILE,
|
|
|
|
INGESTED_NUM_FILES_TOTAL,
|
|
|
|
INGESTED_LEVEL0_NUM_FILES_TOTAL,
|
|
|
|
INGESTED_NUM_KEYS_TOTAL,
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
INTERNAL_CF_STATS_ENUM_MAX,
|
|
|
|
};
|
|
|
|
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
enum InternalDBStatsType {
|
|
|
|
kIntStatsWalFileBytes,
|
|
|
|
kIntStatsWalFileSynced,
|
|
|
|
kIntStatsBytesWritten,
|
|
|
|
kIntStatsNumKeysWritten,
|
|
|
|
kIntStatsWriteDoneByOther,
|
|
|
|
kIntStatsWriteDoneBySelf,
|
|
|
|
kIntStatsWriteWithWal,
|
|
|
|
kIntStatsWriteStallMicros,
|
|
|
|
kIntStatsNumMax,
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
};
|
|
|
|
|
Use deleters to label cache entries and collect stats (#8297)
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
4 years ago
|
|
|
InternalStats(int num_levels, SystemClock* clock, ColumnFamilyData* cfd);
|
|
|
|
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
// Per level compaction stats. comp_stats_[level] stores the stats for
|
|
|
|
// compactions that produced data for the specified "level".
|
|
|
|
struct CompactionStats {
|
|
|
|
uint64_t micros;
|
|
|
|
uint64_t cpu_micros;
|
|
|
|
|
|
|
|
// The number of bytes read from all non-output levels (table files)
|
|
|
|
uint64_t bytes_read_non_output_levels;
|
|
|
|
|
|
|
|
// The number of bytes read from the compaction output level (table files)
|
|
|
|
uint64_t bytes_read_output_level;
|
|
|
|
|
|
|
|
// The number of bytes read from blob files
|
|
|
|
uint64_t bytes_read_blob;
|
|
|
|
|
|
|
|
// Total number of bytes written to table files during compaction
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
uint64_t bytes_written;
|
|
|
|
|
|
|
|
// Total number of bytes written to blob files during compaction
|
|
|
|
uint64_t bytes_written_blob;
|
|
|
|
|
|
|
|
// Total number of bytes moved to the output level (table files)
|
|
|
|
uint64_t bytes_moved;
|
|
|
|
|
|
|
|
// The number of compaction input files in all non-output levels (table
|
|
|
|
// files)
|
|
|
|
int num_input_files_in_non_output_levels;
|
|
|
|
|
|
|
|
// The number of compaction input files in the output level (table files)
|
|
|
|
int num_input_files_in_output_level;
|
|
|
|
|
|
|
|
// The number of compaction output files (table files)
|
|
|
|
int num_output_files;
|
|
|
|
|
|
|
|
// The number of compaction output files (blob files)
|
|
|
|
int num_output_files_blob;
|
|
|
|
|
|
|
|
// Total incoming entries during compaction between levels N and N+1
|
|
|
|
uint64_t num_input_records;
|
|
|
|
|
|
|
|
// Accumulated diff number of entries
|
|
|
|
// (num input entries - num output entries) for compaction levels N and N+1
|
|
|
|
uint64_t num_dropped_records;
|
|
|
|
|
|
|
|
// Number of compactions done
|
|
|
|
int count;
|
|
|
|
|
|
|
|
// Number of compactions done per CompactionReason
|
|
|
|
int counts[static_cast<int>(CompactionReason::kNumOfReasons)];
|
|
|
|
|
|
|
|
explicit CompactionStats()
|
|
|
|
: micros(0),
|
|
|
|
cpu_micros(0),
|
|
|
|
bytes_read_non_output_levels(0),
|
|
|
|
bytes_read_output_level(0),
|
|
|
|
bytes_read_blob(0),
|
|
|
|
bytes_written(0),
|
|
|
|
bytes_written_blob(0),
|
|
|
|
bytes_moved(0),
|
|
|
|
num_input_files_in_non_output_levels(0),
|
|
|
|
num_input_files_in_output_level(0),
|
|
|
|
num_output_files(0),
|
|
|
|
num_output_files_blob(0),
|
|
|
|
num_input_records(0),
|
|
|
|
num_dropped_records(0),
|
|
|
|
count(0) {
|
|
|
|
int num_of_reasons = static_cast<int>(CompactionReason::kNumOfReasons);
|
|
|
|
for (int i = 0; i < num_of_reasons; i++) {
|
|
|
|
counts[i] = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
explicit CompactionStats(CompactionReason reason, int c)
|
|
|
|
: micros(0),
|
|
|
|
cpu_micros(0),
|
|
|
|
bytes_read_non_output_levels(0),
|
|
|
|
bytes_read_output_level(0),
|
|
|
|
bytes_read_blob(0),
|
|
|
|
bytes_written(0),
|
|
|
|
bytes_written_blob(0),
|
|
|
|
bytes_moved(0),
|
|
|
|
num_input_files_in_non_output_levels(0),
|
|
|
|
num_input_files_in_output_level(0),
|
|
|
|
num_output_files(0),
|
|
|
|
num_output_files_blob(0),
|
|
|
|
num_input_records(0),
|
|
|
|
num_dropped_records(0),
|
|
|
|
count(c) {
|
|
|
|
int num_of_reasons = static_cast<int>(CompactionReason::kNumOfReasons);
|
|
|
|
for (int i = 0; i < num_of_reasons; i++) {
|
|
|
|
counts[i] = 0;
|
|
|
|
}
|
|
|
|
int r = static_cast<int>(reason);
|
|
|
|
if (r >= 0 && r < num_of_reasons) {
|
|
|
|
counts[r] = c;
|
|
|
|
} else {
|
|
|
|
count = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
explicit CompactionStats(const CompactionStats& c)
|
|
|
|
: micros(c.micros),
|
|
|
|
cpu_micros(c.cpu_micros),
|
|
|
|
bytes_read_non_output_levels(c.bytes_read_non_output_levels),
|
|
|
|
bytes_read_output_level(c.bytes_read_output_level),
|
|
|
|
bytes_read_blob(c.bytes_read_blob),
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
bytes_written(c.bytes_written),
|
|
|
|
bytes_written_blob(c.bytes_written_blob),
|
|
|
|
bytes_moved(c.bytes_moved),
|
|
|
|
num_input_files_in_non_output_levels(
|
|
|
|
c.num_input_files_in_non_output_levels),
|
|
|
|
num_input_files_in_output_level(c.num_input_files_in_output_level),
|
|
|
|
num_output_files(c.num_output_files),
|
|
|
|
num_output_files_blob(c.num_output_files_blob),
|
|
|
|
num_input_records(c.num_input_records),
|
|
|
|
num_dropped_records(c.num_dropped_records),
|
|
|
|
count(c.count) {
|
|
|
|
int num_of_reasons = static_cast<int>(CompactionReason::kNumOfReasons);
|
|
|
|
for (int i = 0; i < num_of_reasons; i++) {
|
|
|
|
counts[i] = c.counts[i];
|
|
|
|
}
|
|
|
|
}
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
|
|
|
|
CompactionStats& operator=(const CompactionStats& c) {
|
|
|
|
micros = c.micros;
|
|
|
|
cpu_micros = c.cpu_micros;
|
|
|
|
bytes_read_non_output_levels = c.bytes_read_non_output_levels;
|
|
|
|
bytes_read_output_level = c.bytes_read_output_level;
|
|
|
|
bytes_read_blob = c.bytes_read_blob;
|
|
|
|
bytes_written = c.bytes_written;
|
|
|
|
bytes_written_blob = c.bytes_written_blob;
|
|
|
|
bytes_moved = c.bytes_moved;
|
|
|
|
num_input_files_in_non_output_levels =
|
|
|
|
c.num_input_files_in_non_output_levels;
|
|
|
|
num_input_files_in_output_level = c.num_input_files_in_output_level;
|
|
|
|
num_output_files = c.num_output_files;
|
|
|
|
num_output_files_blob = c.num_output_files_blob;
|
|
|
|
num_input_records = c.num_input_records;
|
|
|
|
num_dropped_records = c.num_dropped_records;
|
|
|
|
count = c.count;
|
|
|
|
|
|
|
|
int num_of_reasons = static_cast<int>(CompactionReason::kNumOfReasons);
|
|
|
|
for (int i = 0; i < num_of_reasons; i++) {
|
|
|
|
counts[i] = c.counts[i];
|
|
|
|
}
|
|
|
|
return *this;
|
|
|
|
}
|
|
|
|
|
|
|
|
void Clear() {
|
|
|
|
this->micros = 0;
|
|
|
|
this->cpu_micros = 0;
|
|
|
|
this->bytes_read_non_output_levels = 0;
|
|
|
|
this->bytes_read_output_level = 0;
|
|
|
|
this->bytes_read_blob = 0;
|
|
|
|
this->bytes_written = 0;
|
|
|
|
this->bytes_written_blob = 0;
|
|
|
|
this->bytes_moved = 0;
|
|
|
|
this->num_input_files_in_non_output_levels = 0;
|
|
|
|
this->num_input_files_in_output_level = 0;
|
|
|
|
this->num_output_files = 0;
|
|
|
|
this->num_output_files_blob = 0;
|
|
|
|
this->num_input_records = 0;
|
|
|
|
this->num_dropped_records = 0;
|
|
|
|
this->count = 0;
|
|
|
|
int num_of_reasons = static_cast<int>(CompactionReason::kNumOfReasons);
|
|
|
|
for (int i = 0; i < num_of_reasons; i++) {
|
|
|
|
counts[i] = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void Add(const CompactionStats& c) {
|
|
|
|
this->micros += c.micros;
|
|
|
|
this->cpu_micros += c.cpu_micros;
|
|
|
|
this->bytes_read_non_output_levels += c.bytes_read_non_output_levels;
|
|
|
|
this->bytes_read_output_level += c.bytes_read_output_level;
|
|
|
|
this->bytes_read_blob += c.bytes_read_blob;
|
|
|
|
this->bytes_written += c.bytes_written;
|
|
|
|
this->bytes_written_blob += c.bytes_written_blob;
|
|
|
|
this->bytes_moved += c.bytes_moved;
|
|
|
|
this->num_input_files_in_non_output_levels +=
|
|
|
|
c.num_input_files_in_non_output_levels;
|
|
|
|
this->num_input_files_in_output_level +=
|
|
|
|
c.num_input_files_in_output_level;
|
|
|
|
this->num_output_files += c.num_output_files;
|
|
|
|
this->num_output_files_blob += c.num_output_files_blob;
|
|
|
|
this->num_input_records += c.num_input_records;
|
|
|
|
this->num_dropped_records += c.num_dropped_records;
|
|
|
|
this->count += c.count;
|
|
|
|
int num_of_reasons = static_cast<int>(CompactionReason::kNumOfReasons);
|
|
|
|
for (int i = 0; i< num_of_reasons; i++) {
|
|
|
|
counts[i] += c.counts[i];
|
|
|
|
}
|
|
|
|
}
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
|
|
|
|
void Subtract(const CompactionStats& c) {
|
|
|
|
this->micros -= c.micros;
|
|
|
|
this->cpu_micros -= c.cpu_micros;
|
|
|
|
this->bytes_read_non_output_levels -= c.bytes_read_non_output_levels;
|
|
|
|
this->bytes_read_output_level -= c.bytes_read_output_level;
|
|
|
|
this->bytes_read_blob -= c.bytes_read_blob;
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
this->bytes_written -= c.bytes_written;
|
|
|
|
this->bytes_written_blob -= c.bytes_written_blob;
|
|
|
|
this->bytes_moved -= c.bytes_moved;
|
|
|
|
this->num_input_files_in_non_output_levels -=
|
|
|
|
c.num_input_files_in_non_output_levels;
|
|
|
|
this->num_input_files_in_output_level -=
|
|
|
|
c.num_input_files_in_output_level;
|
|
|
|
this->num_output_files -= c.num_output_files;
|
|
|
|
this->num_output_files_blob -= c.num_output_files_blob;
|
|
|
|
this->num_input_records -= c.num_input_records;
|
|
|
|
this->num_dropped_records -= c.num_dropped_records;
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
this->count -= c.count;
|
|
|
|
int num_of_reasons = static_cast<int>(CompactionReason::kNumOfReasons);
|
|
|
|
for (int i = 0; i < num_of_reasons; i++) {
|
|
|
|
counts[i] -= c.counts[i];
|
|
|
|
}
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
}
|
|
|
|
};
|
|
|
|
|
Use deleters to label cache entries and collect stats (#8297)
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
4 years ago
|
|
|
// For use with CacheEntryStatsCollector
|
|
|
|
struct CacheEntryRoleStats {
|
|
|
|
uint64_t cache_capacity = 0;
|
|
|
|
std::string cache_id;
|
|
|
|
std::array<uint64_t, kNumCacheEntryRoles> total_charges;
|
|
|
|
std::array<size_t, kNumCacheEntryRoles> entry_counts;
|
|
|
|
uint32_t collection_count = 0;
|
|
|
|
uint32_t copies_of_last_collection = 0;
|
|
|
|
uint64_t last_start_time_micros_ = 0;
|
|
|
|
uint64_t last_end_time_micros_ = 0;
|
|
|
|
|
|
|
|
void Clear() {
|
|
|
|
// Wipe everything except collection_count
|
|
|
|
uint32_t saved_collection_count = collection_count;
|
|
|
|
*this = CacheEntryRoleStats();
|
|
|
|
collection_count = saved_collection_count;
|
|
|
|
}
|
|
|
|
|
|
|
|
void BeginCollection(Cache*, SystemClock*, uint64_t start_time_micros);
|
|
|
|
std::function<void(const Slice&, void*, size_t, Cache::DeleterFn)>
|
|
|
|
GetEntryCallback();
|
|
|
|
void EndCollection(Cache*, SystemClock*, uint64_t end_time_micros);
|
|
|
|
void SkippedCollection();
|
|
|
|
|
|
|
|
std::string ToString(SystemClock* clock) const;
|
|
|
|
void ToMap(std::map<std::string, std::string>* values,
|
|
|
|
SystemClock* clock) const;
|
|
|
|
|
|
|
|
private:
|
|
|
|
std::unordered_map<Cache::DeleterFn, CacheEntryRole> role_map_;
|
|
|
|
uint64_t GetLastDurationMicros() const;
|
|
|
|
};
|
|
|
|
|
|
|
|
void Clear() {
|
|
|
|
for (int i = 0; i < kIntStatsNumMax; i++) {
|
|
|
|
db_stats_[i].store(0);
|
|
|
|
}
|
|
|
|
for (int i = 0; i < INTERNAL_CF_STATS_ENUM_MAX; i++) {
|
|
|
|
cf_stats_count_[i] = 0;
|
|
|
|
cf_stats_value_[i] = 0;
|
|
|
|
}
|
|
|
|
for (auto& comp_stat : comp_stats_) {
|
|
|
|
comp_stat.Clear();
|
|
|
|
}
|
|
|
|
for (auto& h : file_read_latency_) {
|
|
|
|
h.Clear();
|
|
|
|
}
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
|
|
|
blob_file_read_latency_.Clear();
|
|
|
|
cf_stats_snapshot_.Clear();
|
|
|
|
db_stats_snapshot_.Clear();
|
|
|
|
bg_error_count_ = 0;
|
|
|
|
started_at_ = clock_->NowMicros();
|
|
|
|
}
|
|
|
|
|
|
|
|
void AddCompactionStats(int level, Env::Priority thread_pri,
|
|
|
|
const CompactionStats& stats) {
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
comp_stats_[level].Add(stats);
|
|
|
|
comp_stats_by_pri_[thread_pri].Add(stats);
|
|
|
|
}
|
|
|
|
|
|
|
|
void IncBytesMoved(int level, uint64_t amount) {
|
|
|
|
comp_stats_[level].bytes_moved += amount;
|
|
|
|
}
|
|
|
|
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
void AddCFStats(InternalCFStatsType type, uint64_t value) {
|
|
|
|
cf_stats_value_[type] += value;
|
|
|
|
++cf_stats_count_[type];
|
|
|
|
}
|
|
|
|
|
|
|
|
void AddDBStats(InternalDBStatsType type, uint64_t value,
|
|
|
|
bool concurrent = false) {
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
auto& v = db_stats_[type];
|
|
|
|
if (concurrent) {
|
|
|
|
v.fetch_add(value, std::memory_order_relaxed);
|
|
|
|
} else {
|
|
|
|
v.store(v.load(std::memory_order_relaxed) + value,
|
|
|
|
std::memory_order_relaxed);
|
|
|
|
}
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
}
|
|
|
|
|
|
|
|
uint64_t GetDBStats(InternalDBStatsType type) {
|
|
|
|
return db_stats_[type].load(std::memory_order_relaxed);
|
|
|
|
}
|
|
|
|
|
Measure file read latency histogram per level
Summary: In internal stats, remember read latency histogram, if statistics is enabled. It can be retrieved from DB::GetProperty() with "rocksdb.dbstats" property, if it is enabled.
Test Plan: Manually run db_bench and prints out "rocksdb.dbstats" by hand and make sure it prints out as expected
Reviewers: igor, IslamAbdelRahman, rven, kradhakrishnan, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44193
9 years ago
|
|
|
HistogramImpl* GetFileReadHist(int level) {
|
|
|
|
return &file_read_latency_[level];
|
|
|
|
}
|
|
|
|
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
|
|
|
HistogramImpl* GetBlobFileReadHist() { return &blob_file_read_latency_; }
|
|
|
|
|
|
|
|
uint64_t GetBackgroundErrorCount() const { return bg_error_count_; }
|
|
|
|
|
|
|
|
uint64_t BumpAndGetBackgroundErrorCount() { return ++bg_error_count_; }
|
|
|
|
|
Eliminate duplicated property constants
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
9 years ago
|
|
|
bool GetStringProperty(const DBPropertyInfo& property_info,
|
|
|
|
const Slice& property, std::string* value);
|
|
|
|
|
|
|
|
bool GetMapProperty(const DBPropertyInfo& property_info,
|
|
|
|
const Slice& property,
|
|
|
|
std::map<std::string, std::string>* value);
|
|
|
|
|
Eliminate duplicated property constants
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
9 years ago
|
|
|
bool GetIntProperty(const DBPropertyInfo& property_info, uint64_t* value,
|
|
|
|
DBImpl* db);
|
|
|
|
|
Eliminate duplicated property constants
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
9 years ago
|
|
|
bool GetIntPropertyOutOfMutex(const DBPropertyInfo& property_info,
|
|
|
|
Version* version, uint64_t* value);
|
|
|
|
|
Don't hold DB mutex for block cache entry stat scans (#8538)
Summary:
I previously didn't notice the DB mutex was being held during
block cache entry stat scans, probably because I primarily checked for
read performance regressions, because they require the block cache and
are traditionally latency-sensitive.
This change does some refactoring to avoid holding DB mutex and to
avoid triggering and waiting for a scan in GetProperty("rocksdb.cfstats").
Some tests have to be updated because now the stats collector is
populated in the Cache aggressively on DB startup rather than lazily.
(I hope to clean up some of this added complexity in the future.)
This change also ensures proper treatment of need_out_of_mutex for
non-int DB properties.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8538
Test Plan:
Added unit test logic that uses sync points to fail if the DB mutex
is held during a scan, covering the various ways that a scan might be
triggered.
Performance test - the known impact to holding the DB mutex is on
TransactionDB, and the easiest way to see the impact is to hack the
scan code to almost always miss and take an artificially long time
scanning. Here I've injected an unconditional 5s sleep at the call to
ApplyToAllEntries.
Before (hacked):
$ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 433.219 micros/op 2308 ops/sec; 0.1 MB/s ( transactions:78999 aborts:0)
rocksdb.db.write.micros P50 : 16.135883 P95 : 36.622503 P99 : 66.036115 P100 : 5000614.000000 COUNT : 149677 SUM : 8364856
$ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 448.802 micros/op 2228 ops/sec; 0.1 MB/s ( transactions:75999 aborts:0)
rocksdb.db.write.micros P50 : 16.629221 P95 : 37.320607 P99 : 72.144341 P100 : 5000871.000000 COUNT : 143995 SUM : 13472323
Notice the 5s P100 write time.
After (hacked):
$ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 303.645 micros/op 3293 ops/sec; 0.1 MB/s ( transactions:98999 aborts:0)
rocksdb.db.write.micros P50 : 16.061871 P95 : 33.978834 P99 : 60.018017 P100 : 616315.000000 COUNT : 187619 SUM : 4097407
$ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 310.383 micros/op 3221 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0)
rocksdb.db.write.micros P50 : 16.270026 P95 : 35.786844 P99 : 64.302878 P100 : 603088.000000 COUNT : 183819 SUM : 4095918
P100 write is now ~0.6s. Not good, but it's the same even if I completely bypass all the scanning code:
$ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 311.365 micros/op 3211 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0)
rocksdb.db.write.micros P50 : 16.274362 P95 : 36.221184 P99 : 68.809783 P100 : 649808.000000 COUNT : 183819 SUM : 4156767
$ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 308.395 micros/op 3242 ops/sec; 0.1 MB/s ( transactions:97999 aborts:0)
rocksdb.db.write.micros P50 : 16.106222 P95 : 37.202403 P99 : 67.081875 P100 : 598091.000000 COUNT : 185714 SUM : 4098832
No substantial difference.
Reviewed By: siying
Differential Revision: D29738847
Pulled By: pdillinger
fbshipit-source-id: 1c5c155f5a1b62e4fea0fd4eeb515a8b7474027b
3 years ago
|
|
|
// Unless there is a recent enough collection of the stats, collect and
|
|
|
|
// saved new cache entry stats. If `foreground`, require data to be more
|
|
|
|
// recent to skip re-collection.
|
|
|
|
//
|
|
|
|
// This should only be called while NOT holding the DB mutex.
|
|
|
|
void CollectCacheEntryStats(bool foreground);
|
|
|
|
|
|
|
|
const uint64_t* TEST_GetCFStatsValue() const { return cf_stats_value_; }
|
|
|
|
|
|
|
|
const std::vector<CompactionStats>& TEST_GetCompactionStats() const {
|
|
|
|
return comp_stats_;
|
|
|
|
}
|
|
|
|
|
Don't hold DB mutex for block cache entry stat scans (#8538)
Summary:
I previously didn't notice the DB mutex was being held during
block cache entry stat scans, probably because I primarily checked for
read performance regressions, because they require the block cache and
are traditionally latency-sensitive.
This change does some refactoring to avoid holding DB mutex and to
avoid triggering and waiting for a scan in GetProperty("rocksdb.cfstats").
Some tests have to be updated because now the stats collector is
populated in the Cache aggressively on DB startup rather than lazily.
(I hope to clean up some of this added complexity in the future.)
This change also ensures proper treatment of need_out_of_mutex for
non-int DB properties.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8538
Test Plan:
Added unit test logic that uses sync points to fail if the DB mutex
is held during a scan, covering the various ways that a scan might be
triggered.
Performance test - the known impact to holding the DB mutex is on
TransactionDB, and the easiest way to see the impact is to hack the
scan code to almost always miss and take an artificially long time
scanning. Here I've injected an unconditional 5s sleep at the call to
ApplyToAllEntries.
Before (hacked):
$ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 433.219 micros/op 2308 ops/sec; 0.1 MB/s ( transactions:78999 aborts:0)
rocksdb.db.write.micros P50 : 16.135883 P95 : 36.622503 P99 : 66.036115 P100 : 5000614.000000 COUNT : 149677 SUM : 8364856
$ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 448.802 micros/op 2228 ops/sec; 0.1 MB/s ( transactions:75999 aborts:0)
rocksdb.db.write.micros P50 : 16.629221 P95 : 37.320607 P99 : 72.144341 P100 : 5000871.000000 COUNT : 143995 SUM : 13472323
Notice the 5s P100 write time.
After (hacked):
$ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 303.645 micros/op 3293 ops/sec; 0.1 MB/s ( transactions:98999 aborts:0)
rocksdb.db.write.micros P50 : 16.061871 P95 : 33.978834 P99 : 60.018017 P100 : 616315.000000 COUNT : 187619 SUM : 4097407
$ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 310.383 micros/op 3221 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0)
rocksdb.db.write.micros P50 : 16.270026 P95 : 35.786844 P99 : 64.302878 P100 : 603088.000000 COUNT : 183819 SUM : 4095918
P100 write is now ~0.6s. Not good, but it's the same even if I completely bypass all the scanning code:
$ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 311.365 micros/op 3211 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0)
rocksdb.db.write.micros P50 : 16.274362 P95 : 36.221184 P99 : 68.809783 P100 : 649808.000000 COUNT : 183819 SUM : 4156767
$ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 308.395 micros/op 3242 ops/sec; 0.1 MB/s ( transactions:97999 aborts:0)
rocksdb.db.write.micros P50 : 16.106222 P95 : 37.202403 P99 : 67.081875 P100 : 598091.000000 COUNT : 185714 SUM : 4098832
No substantial difference.
Reviewed By: siying
Differential Revision: D29738847
Pulled By: pdillinger
fbshipit-source-id: 1c5c155f5a1b62e4fea0fd4eeb515a8b7474027b
3 years ago
|
|
|
void TEST_GetCacheEntryRoleStats(CacheEntryRoleStats* stats, bool foreground);
|
Use deleters to label cache entries and collect stats (#8297)
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
4 years ago
|
|
|
|
Eliminate duplicated property constants
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
9 years ago
|
|
|
// Store a mapping from the user-facing DB::Properties string to our
|
|
|
|
// DBPropertyInfo struct used internally for retrieving properties.
|
|
|
|
static const std::unordered_map<std::string, DBPropertyInfo> ppt_name_to_info;
|
|
|
|
|
|
|
|
private:
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
void DumpDBStats(std::string* value);
|
|
|
|
void DumpCFMapStats(std::map<std::string, std::string>* cf_stats);
|
|
|
|
void DumpCFMapStats(
|
|
|
|
const VersionStorageInfo* vstorage,
|
|
|
|
std::map<int, std::map<LevelStatType, double>>* level_stats,
|
|
|
|
CompactionStats* compaction_stats_sum);
|
|
|
|
void DumpCFMapStatsByPriority(
|
|
|
|
std::map<int, std::map<LevelStatType, double>>* priorities_stats);
|
|
|
|
void DumpCFMapStatsIOStalls(std::map<std::string, std::string>* cf_stats);
|
|
|
|
void DumpCFStats(std::string* value);
|
|
|
|
void DumpCFStatsNoFileHistogram(std::string* value);
|
|
|
|
void DumpCFFileHistogram(std::string* value);
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
|
Don't hold DB mutex for block cache entry stat scans (#8538)
Summary:
I previously didn't notice the DB mutex was being held during
block cache entry stat scans, probably because I primarily checked for
read performance regressions, because they require the block cache and
are traditionally latency-sensitive.
This change does some refactoring to avoid holding DB mutex and to
avoid triggering and waiting for a scan in GetProperty("rocksdb.cfstats").
Some tests have to be updated because now the stats collector is
populated in the Cache aggressively on DB startup rather than lazily.
(I hope to clean up some of this added complexity in the future.)
This change also ensures proper treatment of need_out_of_mutex for
non-int DB properties.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8538
Test Plan:
Added unit test logic that uses sync points to fail if the DB mutex
is held during a scan, covering the various ways that a scan might be
triggered.
Performance test - the known impact to holding the DB mutex is on
TransactionDB, and the easiest way to see the impact is to hack the
scan code to almost always miss and take an artificially long time
scanning. Here I've injected an unconditional 5s sleep at the call to
ApplyToAllEntries.
Before (hacked):
$ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 433.219 micros/op 2308 ops/sec; 0.1 MB/s ( transactions:78999 aborts:0)
rocksdb.db.write.micros P50 : 16.135883 P95 : 36.622503 P99 : 66.036115 P100 : 5000614.000000 COUNT : 149677 SUM : 8364856
$ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 448.802 micros/op 2228 ops/sec; 0.1 MB/s ( transactions:75999 aborts:0)
rocksdb.db.write.micros P50 : 16.629221 P95 : 37.320607 P99 : 72.144341 P100 : 5000871.000000 COUNT : 143995 SUM : 13472323
Notice the 5s P100 write time.
After (hacked):
$ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 303.645 micros/op 3293 ops/sec; 0.1 MB/s ( transactions:98999 aborts:0)
rocksdb.db.write.micros P50 : 16.061871 P95 : 33.978834 P99 : 60.018017 P100 : 616315.000000 COUNT : 187619 SUM : 4097407
$ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 310.383 micros/op 3221 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0)
rocksdb.db.write.micros P50 : 16.270026 P95 : 35.786844 P99 : 64.302878 P100 : 603088.000000 COUNT : 183819 SUM : 4095918
P100 write is now ~0.6s. Not good, but it's the same even if I completely bypass all the scanning code:
$ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 311.365 micros/op 3211 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0)
rocksdb.db.write.micros P50 : 16.274362 P95 : 36.221184 P99 : 68.809783 P100 : 649808.000000 COUNT : 183819 SUM : 4156767
$ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 308.395 micros/op 3242 ops/sec; 0.1 MB/s ( transactions:97999 aborts:0)
rocksdb.db.write.micros P50 : 16.106222 P95 : 37.202403 P99 : 67.081875 P100 : 598091.000000 COUNT : 185714 SUM : 4098832
No substantial difference.
Reviewed By: siying
Differential Revision: D29738847
Pulled By: pdillinger
fbshipit-source-id: 1c5c155f5a1b62e4fea0fd4eeb515a8b7474027b
3 years ago
|
|
|
bool GetBlockCacheForStats(Cache** block_cache);
|
Use deleters to label cache entries and collect stats (#8297)
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
4 years ago
|
|
|
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
// Per-DB stats
|
|
|
|
std::atomic<uint64_t> db_stats_[kIntStatsNumMax];
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
// Per-ColumnFamily stats
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
uint64_t cf_stats_value_[INTERNAL_CF_STATS_ENUM_MAX];
|
|
|
|
uint64_t cf_stats_count_[INTERNAL_CF_STATS_ENUM_MAX];
|
Don't hold DB mutex for block cache entry stat scans (#8538)
Summary:
I previously didn't notice the DB mutex was being held during
block cache entry stat scans, probably because I primarily checked for
read performance regressions, because they require the block cache and
are traditionally latency-sensitive.
This change does some refactoring to avoid holding DB mutex and to
avoid triggering and waiting for a scan in GetProperty("rocksdb.cfstats").
Some tests have to be updated because now the stats collector is
populated in the Cache aggressively on DB startup rather than lazily.
(I hope to clean up some of this added complexity in the future.)
This change also ensures proper treatment of need_out_of_mutex for
non-int DB properties.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8538
Test Plan:
Added unit test logic that uses sync points to fail if the DB mutex
is held during a scan, covering the various ways that a scan might be
triggered.
Performance test - the known impact to holding the DB mutex is on
TransactionDB, and the easiest way to see the impact is to hack the
scan code to almost always miss and take an artificially long time
scanning. Here I've injected an unconditional 5s sleep at the call to
ApplyToAllEntries.
Before (hacked):
$ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 433.219 micros/op 2308 ops/sec; 0.1 MB/s ( transactions:78999 aborts:0)
rocksdb.db.write.micros P50 : 16.135883 P95 : 36.622503 P99 : 66.036115 P100 : 5000614.000000 COUNT : 149677 SUM : 8364856
$ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 448.802 micros/op 2228 ops/sec; 0.1 MB/s ( transactions:75999 aborts:0)
rocksdb.db.write.micros P50 : 16.629221 P95 : 37.320607 P99 : 72.144341 P100 : 5000871.000000 COUNT : 143995 SUM : 13472323
Notice the 5s P100 write time.
After (hacked):
$ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 303.645 micros/op 3293 ops/sec; 0.1 MB/s ( transactions:98999 aborts:0)
rocksdb.db.write.micros P50 : 16.061871 P95 : 33.978834 P99 : 60.018017 P100 : 616315.000000 COUNT : 187619 SUM : 4097407
$ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 310.383 micros/op 3221 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0)
rocksdb.db.write.micros P50 : 16.270026 P95 : 35.786844 P99 : 64.302878 P100 : 603088.000000 COUNT : 183819 SUM : 4095918
P100 write is now ~0.6s. Not good, but it's the same even if I completely bypass all the scanning code:
$ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 311.365 micros/op 3211 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0)
rocksdb.db.write.micros P50 : 16.274362 P95 : 36.221184 P99 : 68.809783 P100 : 649808.000000 COUNT : 183819 SUM : 4156767
$ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 308.395 micros/op 3242 ops/sec; 0.1 MB/s ( transactions:97999 aborts:0)
rocksdb.db.write.micros P50 : 16.106222 P95 : 37.202403 P99 : 67.081875 P100 : 598091.000000 COUNT : 185714 SUM : 4098832
No substantial difference.
Reviewed By: siying
Differential Revision: D29738847
Pulled By: pdillinger
fbshipit-source-id: 1c5c155f5a1b62e4fea0fd4eeb515a8b7474027b
3 years ago
|
|
|
// Initialize/reference the collector in constructor so that we don't need
|
|
|
|
// additional synchronization in InternalStats, relying on synchronization
|
|
|
|
// in CacheEntryStatsCollector::GetStats. This collector is pinned in cache
|
|
|
|
// (through a shared_ptr) so that it does not get immediately ejected from
|
|
|
|
// a full cache, which would force a re-scan on the next GetStats.
|
|
|
|
std::shared_ptr<CacheEntryStatsCollector<CacheEntryRoleStats>>
|
|
|
|
cache_entry_stats_collector_;
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
// Per-ColumnFamily/level compaction stats
|
|
|
|
std::vector<CompactionStats> comp_stats_;
|
|
|
|
std::vector<CompactionStats> comp_stats_by_pri_;
|
Measure file read latency histogram per level
Summary: In internal stats, remember read latency histogram, if statistics is enabled. It can be retrieved from DB::GetProperty() with "rocksdb.dbstats" property, if it is enabled.
Test Plan: Manually run db_bench and prints out "rocksdb.dbstats" by hand and make sure it prints out as expected
Reviewers: igor, IslamAbdelRahman, rven, kradhakrishnan, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44193
9 years ago
|
|
|
std::vector<HistogramImpl> file_read_latency_;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
4 years ago
|
|
|
HistogramImpl blob_file_read_latency_;
|
|
|
|
|
|
|
|
// Used to compute per-interval statistics
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
struct CFStatsSnapshot {
|
|
|
|
// ColumnFamily-level stats
|
|
|
|
CompactionStats comp_stats;
|
|
|
|
uint64_t ingest_bytes_flush; // Bytes written to L0 (Flush)
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
uint64_t stall_count; // Stall count
|
|
|
|
// Stats from compaction jobs - bytes written, bytes read, duration.
|
|
|
|
uint64_t compact_bytes_write;
|
|
|
|
uint64_t compact_bytes_read;
|
|
|
|
uint64_t compact_micros;
|
|
|
|
double seconds_up;
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
|
|
|
|
// AddFile specific stats
|
|
|
|
uint64_t ingest_bytes_addfile; // Total Bytes ingested
|
|
|
|
uint64_t ingest_files_addfile; // Total number of files ingested
|
|
|
|
uint64_t ingest_l0_files_addfile; // Total number of files ingested to L0
|
|
|
|
uint64_t ingest_keys_addfile; // Total number of keys ingested
|
|
|
|
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
CFStatsSnapshot()
|
|
|
|
: ingest_bytes_flush(0),
|
|
|
|
stall_count(0),
|
|
|
|
compact_bytes_write(0),
|
|
|
|
compact_bytes_read(0),
|
|
|
|
compact_micros(0),
|
|
|
|
seconds_up(0),
|
|
|
|
ingest_bytes_addfile(0),
|
|
|
|
ingest_files_addfile(0),
|
|
|
|
ingest_l0_files_addfile(0),
|
|
|
|
ingest_keys_addfile(0) {}
|
|
|
|
|
|
|
|
void Clear() {
|
|
|
|
comp_stats.Clear();
|
|
|
|
ingest_bytes_flush = 0;
|
|
|
|
stall_count = 0;
|
|
|
|
compact_bytes_write = 0;
|
|
|
|
compact_bytes_read = 0;
|
|
|
|
compact_micros = 0;
|
|
|
|
seconds_up = 0;
|
|
|
|
ingest_bytes_addfile = 0;
|
|
|
|
ingest_files_addfile = 0;
|
|
|
|
ingest_l0_files_addfile = 0;
|
|
|
|
ingest_keys_addfile = 0;
|
|
|
|
}
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
} cf_stats_snapshot_;
|
|
|
|
|
|
|
|
struct DBStatsSnapshot {
|
|
|
|
// DB-level stats
|
|
|
|
uint64_t ingest_bytes; // Bytes written by user
|
|
|
|
uint64_t wal_bytes; // Bytes written to WAL
|
|
|
|
uint64_t wal_synced; // Number of times WAL is synced
|
|
|
|
uint64_t write_with_wal; // Number of writes that request WAL
|
|
|
|
// These count the number of writes processed by the calling thread or
|
|
|
|
// another thread.
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
uint64_t write_other;
|
|
|
|
uint64_t write_self;
|
|
|
|
// Total number of keys written. write_self and write_other measure number
|
|
|
|
// of write requests written, Each of the write request can contain updates
|
|
|
|
// to multiple keys. num_keys_written is total number of keys updated by all
|
|
|
|
// those writes.
|
|
|
|
uint64_t num_keys_written;
|
DB Stats Dump to print total stall time
Summary:
Add printing of stall time in DB Stats:
Sample outputs:
** DB Stats **
Uptime(secs): 53.2 total, 1.7 interval
Cumulative writes: 625940 writes, 625939 keys, 625940 batches, 1.0 writes per batch, 0.49 GB user ingest, stall micros: 50691070
Cumulative WAL: 625940 writes, 625939 syncs, 1.00 writes per sync, 0.49 GB written
Interval writes: 10859 writes, 10859 keys, 10859 batches, 1.0 writes per batch, 8.7 MB user ingest, stall micros: 1692319
Interval WAL: 10859 writes, 10859 syncs, 1.00 writes per sync, 0.01 MB written
Test Plan:
make all check
verify printing using db_bench
Reviewers: igor, yhchiang, rven, MarkCallaghan
Reviewed By: MarkCallaghan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D31239
10 years ago
|
|
|
// Total time writes delayed by stalls.
|
|
|
|
uint64_t write_stall_micros;
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
double seconds_up;
|
|
|
|
|
|
|
|
DBStatsSnapshot()
|
|
|
|
: ingest_bytes(0),
|
|
|
|
wal_bytes(0),
|
|
|
|
wal_synced(0),
|
|
|
|
write_with_wal(0),
|
|
|
|
write_other(0),
|
|
|
|
write_self(0),
|
|
|
|
num_keys_written(0),
|
DB Stats Dump to print total stall time
Summary:
Add printing of stall time in DB Stats:
Sample outputs:
** DB Stats **
Uptime(secs): 53.2 total, 1.7 interval
Cumulative writes: 625940 writes, 625939 keys, 625940 batches, 1.0 writes per batch, 0.49 GB user ingest, stall micros: 50691070
Cumulative WAL: 625940 writes, 625939 syncs, 1.00 writes per sync, 0.49 GB written
Interval writes: 10859 writes, 10859 keys, 10859 batches, 1.0 writes per batch, 8.7 MB user ingest, stall micros: 1692319
Interval WAL: 10859 writes, 10859 syncs, 1.00 writes per sync, 0.01 MB written
Test Plan:
make all check
verify printing using db_bench
Reviewers: igor, yhchiang, rven, MarkCallaghan
Reviewed By: MarkCallaghan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D31239
10 years ago
|
|
|
write_stall_micros(0),
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
seconds_up(0) {}
|
|
|
|
|
|
|
|
void Clear() {
|
|
|
|
ingest_bytes = 0;
|
|
|
|
wal_bytes = 0;
|
|
|
|
wal_synced = 0;
|
|
|
|
write_with_wal = 0;
|
|
|
|
write_other = 0;
|
|
|
|
write_self = 0;
|
|
|
|
num_keys_written = 0;
|
|
|
|
write_stall_micros = 0;
|
|
|
|
seconds_up = 0;
|
|
|
|
}
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
} db_stats_snapshot_;
|
|
|
|
|
Eliminate duplicated property constants
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
9 years ago
|
|
|
// Handler functions for getting property values. They use "value" as a value-
|
|
|
|
// result argument, and return true upon successfully setting "value".
|
|
|
|
bool HandleNumFilesAtLevel(std::string* value, Slice suffix);
|
|
|
|
bool HandleCompressionRatioAtLevelPrefix(std::string* value, Slice suffix);
|
Eliminate duplicated property constants
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
9 years ago
|
|
|
bool HandleLevelStats(std::string* value, Slice suffix);
|
|
|
|
bool HandleStats(std::string* value, Slice suffix);
|
|
|
|
bool HandleCFMapStats(std::map<std::string, std::string>* compaction_stats,
|
|
|
|
Slice suffix);
|
Eliminate duplicated property constants
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
9 years ago
|
|
|
bool HandleCFStats(std::string* value, Slice suffix);
|
|
|
|
bool HandleCFStatsNoFileHistogram(std::string* value, Slice suffix);
|
|
|
|
bool HandleCFFileHistogram(std::string* value, Slice suffix);
|
Eliminate duplicated property constants
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
9 years ago
|
|
|
bool HandleDBStats(std::string* value, Slice suffix);
|
|
|
|
bool HandleSsTables(std::string* value, Slice suffix);
|
|
|
|
bool HandleAggregatedTableProperties(std::string* value, Slice suffix);
|
|
|
|
bool HandleAggregatedTablePropertiesAtLevel(std::string* value, Slice suffix);
|
|
|
|
bool HandleAggregatedTablePropertiesMap(
|
|
|
|
std::map<std::string, std::string>* values, Slice suffix);
|
|
|
|
bool HandleAggregatedTablePropertiesAtLevelMap(
|
|
|
|
std::map<std::string, std::string>* values, Slice suffix);
|
Eliminate duplicated property constants
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
9 years ago
|
|
|
bool HandleNumImmutableMemTable(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
|
|
|
bool HandleNumImmutableMemTableFlushed(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
|
|
|
bool HandleMemTableFlushPending(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
|
|
|
bool HandleNumRunningFlushes(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
bool HandleCompactionPending(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
bool HandleNumRunningCompactions(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
|
|
|
bool HandleBackgroundErrors(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
bool HandleCurSizeActiveMemTable(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
|
|
|
bool HandleCurSizeAllMemTables(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
bool HandleSizeAllMemTables(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
bool HandleNumEntriesActiveMemTable(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
|
|
|
bool HandleNumEntriesImmMemTables(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
|
|
|
bool HandleNumDeletesActiveMemTable(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
|
|
|
bool HandleNumDeletesImmMemTables(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
|
|
|
bool HandleEstimateNumKeys(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
bool HandleNumSnapshots(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
bool HandleOldestSnapshotTime(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
bool HandleOldestSnapshotSequence(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
Eliminate duplicated property constants
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
9 years ago
|
|
|
bool HandleNumLiveVersions(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
bool HandleCurrentSuperVersionNumber(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
Eliminate duplicated property constants
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
9 years ago
|
|
|
bool HandleIsFileDeletionsEnabled(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
|
|
|
bool HandleBaseLevel(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
bool HandleTotalSstFilesSize(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
bool HandleLiveSstFilesSize(uint64_t* value, DBImpl* db, Version* version);
|
Eliminate duplicated property constants
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
9 years ago
|
|
|
bool HandleEstimatePendingCompactionBytes(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
|
|
|
bool HandleEstimateTableReadersMem(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
|
|
|
bool HandleEstimateLiveDataSize(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
|
|
|
bool HandleMinLogNumberToKeep(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
bool HandleMinObsoleteSstNumberToKeep(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
|
|
|
bool HandleActualDelayedWriteRate(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
|
|
|
bool HandleIsWriteStopped(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
bool HandleEstimateOldestKeyTime(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
|
|
|
bool HandleBlockCacheCapacity(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
bool HandleBlockCacheUsage(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
bool HandleBlockCachePinnedUsage(uint64_t* value, DBImpl* db,
|
|
|
|
Version* version);
|
Use deleters to label cache entries and collect stats (#8297)
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
4 years ago
|
|
|
bool HandleBlockCacheEntryStats(std::string* value, Slice suffix);
|
|
|
|
bool HandleBlockCacheEntryStatsMap(std::map<std::string, std::string>* values,
|
|
|
|
Slice suffix);
|
|
|
|
bool HandleLiveSstFilesSizeAtTemperature(std::string* value, Slice suffix);
|
|
|
|
bool HandleNumBlobFiles(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
bool HandleBlobStats(std::string* value, Slice suffix);
|
|
|
|
bool HandleTotalBlobFileSize(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
bool HandleLiveBlobFileSize(uint64_t* value, DBImpl* db, Version* version);
|
|
|
|
// Total number of background errors encountered. Every time a flush task
|
|
|
|
// or compaction task fails, this counter is incremented. The failure can
|
|
|
|
// be caused by any possible reason, including file system errors, out of
|
|
|
|
// resources, or input file corruption. Failing when retrying the same flush
|
|
|
|
// or compaction will cause the counter to increase too.
|
|
|
|
uint64_t bg_error_count_;
|
|
|
|
|
make internal stats independent of statistics
Summary:
also make it aware of column family
output from db_bench
```
** Compaction Stats [default] **
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15
L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06
L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00
L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00
L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00
Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22
Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00
Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown
Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown
** DB Stats **
Uptime(secs): 202.1 total, 13.5 interval
Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB
Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written
Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB
Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19917
10 years ago
|
|
|
const int number_levels_;
|
|
|
|
SystemClock* clock_;
|
|
|
|
ColumnFamilyData* cfd_;
|
|
|
|
uint64_t started_at_;
|
|
|
|
};
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
|
|
|
class InternalStats {
|
|
|
|
public:
|
|
|
|
enum InternalCFStatsType {
|
|
|
|
L0_FILE_COUNT_LIMIT_SLOWDOWNS,
|
|
|
|
LOCKED_L0_FILE_COUNT_LIMIT_SLOWDOWNS,
|
|
|
|
MEMTABLE_LIMIT_STOPS,
|
|
|
|
MEMTABLE_LIMIT_SLOWDOWNS,
|
|
|
|
L0_FILE_COUNT_LIMIT_STOPS,
|
|
|
|
LOCKED_L0_FILE_COUNT_LIMIT_STOPS,
|
|
|
|
PENDING_COMPACTION_BYTES_LIMIT_SLOWDOWNS,
|
|
|
|
PENDING_COMPACTION_BYTES_LIMIT_STOPS,
|
|
|
|
WRITE_STALLS_ENUM_MAX,
|
|
|
|
BYTES_FLUSHED,
|
|
|
|
BYTES_INGESTED_ADD_FILE,
|
|
|
|
INGESTED_NUM_FILES_TOTAL,
|
|
|
|
INGESTED_LEVEL0_NUM_FILES_TOTAL,
|
|
|
|
INGESTED_NUM_KEYS_TOTAL,
|
|
|
|
INTERNAL_CF_STATS_ENUM_MAX,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum InternalDBStatsType {
|
|
|
|
kIntStatsWalFileBytes,
|
|
|
|
kIntStatsWalFileSynced,
|
|
|
|
kIntStatsBytesWritten,
|
|
|
|
kIntStatsNumKeysWritten,
|
|
|
|
kIntStatsWriteDoneByOther,
|
|
|
|
kIntStatsWriteDoneBySelf,
|
|
|
|
kIntStatsWriteWithWal,
|
|
|
|
kIntStatsWriteStallMicros,
|
|
|
|
kIntStatsNumMax,
|
|
|
|
};
|
|
|
|
|
|
|
|
InternalStats(int /*num_levels*/, SystemClock* /*clock*/,
|
|
|
|
ColumnFamilyData* /*cfd*/) {}
|
|
|
|
|
|
|
|
struct CompactionStats {
|
|
|
|
uint64_t micros;
|
|
|
|
uint64_t cpu_micros;
|
|
|
|
uint64_t bytes_read_non_output_levels;
|
|
|
|
uint64_t bytes_read_output_level;
|
|
|
|
uint64_t bytes_read_blob;
|
|
|
|
uint64_t bytes_written;
|
|
|
|
uint64_t bytes_written_blob;
|
|
|
|
uint64_t bytes_moved;
|
|
|
|
int num_input_files_in_non_output_levels;
|
|
|
|
int num_input_files_in_output_level;
|
|
|
|
int num_output_files;
|
|
|
|
int num_output_files_blob;
|
|
|
|
uint64_t num_input_records;
|
|
|
|
uint64_t num_dropped_records;
|
|
|
|
int count;
|
|
|
|
|
|
|
|
explicit CompactionStats() {}
|
|
|
|
|
|
|
|
explicit CompactionStats(CompactionReason /*reason*/, int /*c*/) {}
|
|
|
|
|
|
|
|
explicit CompactionStats(const CompactionStats& /*c*/) {}
|
|
|
|
|
|
|
|
void Add(const CompactionStats& /*c*/) {}
|
|
|
|
|
|
|
|
void Subtract(const CompactionStats& /*c*/) {}
|
|
|
|
};
|
|
|
|
|
|
|
|
void AddCompactionStats(int /*level*/, Env::Priority /*thread_pri*/,
|
|
|
|
const CompactionStats& /*stats*/) {}
|
|
|
|
|
|
|
|
void IncBytesMoved(int /*level*/, uint64_t /*amount*/) {}
|
|
|
|
|
|
|
|
void AddCFStats(InternalCFStatsType /*type*/, uint64_t /*value*/) {}
|
|
|
|
|
|
|
|
void AddDBStats(InternalDBStatsType /*type*/, uint64_t /*value*/,
|
|
|
|
bool /*concurrent */ = false) {}
|
|
|
|
|
|
|
|
HistogramImpl* GetFileReadHist(int /*level*/) { return nullptr; }
|
Measure file read latency histogram per level
Summary: In internal stats, remember read latency histogram, if statistics is enabled. It can be retrieved from DB::GetProperty() with "rocksdb.dbstats" property, if it is enabled.
Test Plan: Manually run db_bench and prints out "rocksdb.dbstats" by hand and make sure it prints out as expected
Reviewers: igor, IslamAbdelRahman, rven, kradhakrishnan, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44193
9 years ago
|
|
|
|
|
|
|
HistogramImpl* GetBlobFileReadHist() { return nullptr; }
|
|
|
|
|
|
|
|
uint64_t GetBackgroundErrorCount() const { return 0; }
|
|
|
|
|
|
|
|
uint64_t BumpAndGetBackgroundErrorCount() { return 0; }
|
|
|
|
|
|
|
|
bool GetStringProperty(const DBPropertyInfo& /*property_info*/,
|
|
|
|
const Slice& /*property*/, std::string* /*value*/) {
|
Eliminate duplicated property constants
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
9 years ago
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool GetMapProperty(const DBPropertyInfo& /*property_info*/,
|
|
|
|
const Slice& /*property*/,
|
|
|
|
std::map<std::string, std::string>* /*value*/) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool GetIntProperty(const DBPropertyInfo& /*property_info*/, uint64_t* /*value*/,
|
|
|
|
DBImpl* /*db*/) const {
|
Eliminate duplicated property constants
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
9 years ago
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool GetIntPropertyOutOfMutex(const DBPropertyInfo& /*property_info*/,
|
|
|
|
Version* /*version*/, uint64_t* /*value*/) const {
|
Eliminate duplicated property constants
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
9 years ago
|
|
|
return false;
|
|
|
|
}
|
|
|
|
};
|
|
|
|
#endif // !ROCKSDB_LITE
|
|
|
|
|
|
|
|
} // namespace ROCKSDB_NAMESPACE
|