Compaction Support for Range Deletion
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
8 years ago
|
|
|
// Copyright (c) 2016-present, Facebook, Inc. All rights reserved.
|
|
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
|
|
// (found in the LICENSE.Apache file in the root directory).
|
Compaction Support for Range Deletion
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
8 years ago
|
|
|
|
|
|
|
#pragma once
|
|
|
|
|
|
|
|
#include <map>
|
|
|
|
#include <set>
|
Compaction Support for Range Deletion
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
8 years ago
|
|
|
#include <string>
|
|
|
|
#include <vector>
|
|
|
|
|
|
|
|
#include "db/compaction_iteration_stats.h"
|
Compaction Support for Range Deletion
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
8 years ago
|
|
|
#include "db/dbformat.h"
|
|
|
|
#include "db/pinned_iterators_manager.h"
|
|
|
|
#include "db/version_edit.h"
|
|
|
|
#include "include/rocksdb/comparator.h"
|
|
|
|
#include "include/rocksdb/types.h"
|
|
|
|
#include "table/internal_iterator.h"
|
|
|
|
#include "table/scoped_arena_iterator.h"
|
|
|
|
#include "table/table_builder.h"
|
|
|
|
#include "util/kv_map.h"
|
|
|
|
|
|
|
|
namespace rocksdb {
|
|
|
|
|
Range deletion performance improvements + cleanup (#4014)
Summary:
This fixes the same performance issue that #3992 fixes but with much more invasive cleanup.
I'm more excited about this PR because it paves the way for fixing another problem we uncovered at Cockroach where range deletion tombstones can cause massive compactions. For example, suppose L4 contains deletions from [a, c) and [x, z) and no other keys, and L5 is entirely empty. L6, however, is full of data. When compacting L4 -> L5, we'll end up with one file that spans, massively, from [a, z). When we go to compact L5 -> L6, we'll have to rewrite all of L6! If, instead of range deletions in L4, we had keys a, b, x, y, and z, RocksDB would have been smart enough to create two files in L5: one for a and b and another for x, y, and z.
With the changes in this PR, it will be possible to adjust the compaction logic to split tombstones/start new output files when they would span too many files in the grandparent level.
ajkr please take a look when you have a minute!
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4014
Differential Revision: D8773253
Pulled By: ajkr
fbshipit-source-id: ec62fa85f648fdebe1380b83ed997f9baec35677
6 years ago
|
|
|
// RangeDelMaps maintain position across calls to ShouldDelete. The caller may
|
|
|
|
// wish to specify a mode to optimize positioning the iterator during the next
|
|
|
|
// call to ShouldDelete. The non-kFullScan modes are only available when
|
|
|
|
// deletion collapsing is enabled.
|
|
|
|
//
|
|
|
|
// For example, if we invoke Next() on an iterator, kForwardTraversal should be
|
|
|
|
// specified to advance one-by-one through deletions until one is found with its
|
|
|
|
// interval containing the key. This will typically be faster than doing a full
|
|
|
|
// binary search (kBinarySearch).
|
|
|
|
enum class RangeDelPositioningMode {
|
|
|
|
kFullScan, // used iff collapse_deletions_ == false
|
|
|
|
kForwardTraversal,
|
|
|
|
kBackwardTraversal,
|
|
|
|
kBinarySearch,
|
|
|
|
};
|
|
|
|
|
|
|
|
// A RangeDelIterator iterates over range deletion tombstones.
|
|
|
|
class RangeDelIterator {
|
|
|
|
public:
|
|
|
|
virtual ~RangeDelIterator() = default;
|
|
|
|
|
|
|
|
virtual bool Valid() const = 0;
|
|
|
|
virtual void Next() = 0;
|
|
|
|
virtual void Seek(const Slice& target) = 0;
|
|
|
|
virtual RangeTombstone Tombstone() const = 0;
|
|
|
|
};
|
|
|
|
|
|
|
|
// A RangeDelMap keeps track of range deletion tombstones within a snapshot
|
|
|
|
// stripe.
|
|
|
|
//
|
|
|
|
// RangeDelMaps are used internally by RangeDelAggregator. They are not intended
|
|
|
|
// to be used directly.
|
|
|
|
class RangeDelMap {
|
|
|
|
public:
|
|
|
|
virtual ~RangeDelMap() = default;
|
|
|
|
|
|
|
|
virtual bool ShouldDelete(const ParsedInternalKey& parsed,
|
|
|
|
RangeDelPositioningMode mode) = 0;
|
|
|
|
virtual bool IsRangeOverlapped(const Slice& start, const Slice& end) = 0;
|
|
|
|
virtual void InvalidatePosition() = 0;
|
|
|
|
|
|
|
|
virtual size_t Size() const = 0;
|
|
|
|
bool IsEmpty() const { return Size() == 0; }
|
|
|
|
|
|
|
|
virtual void AddTombstone(RangeTombstone tombstone) = 0;
|
|
|
|
virtual std::unique_ptr<RangeDelIterator> NewIterator() = 0;
|
|
|
|
};
|
|
|
|
|
|
|
|
// A RangeDelAggregator aggregates range deletion tombstones as they are
|
|
|
|
// encountered in memtables/SST files. It provides methods that check whether a
|
|
|
|
// key is covered by range tombstones or write the relevant tombstones to a new
|
|
|
|
// SST file.
|
Compaction Support for Range Deletion
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
8 years ago
|
|
|
class RangeDelAggregator {
|
|
|
|
public:
|
|
|
|
// @param snapshots These are used to organize the tombstones into snapshot
|
|
|
|
// stripes, which is the seqnum range between consecutive snapshots,
|
|
|
|
// including the higher snapshot and excluding the lower one. Currently,
|
|
|
|
// this is used by ShouldDelete() to prevent deletion of keys that are
|
|
|
|
// covered by range tombstones in other snapshot stripes. This constructor
|
|
|
|
// is used for writes (flush/compaction). All DB snapshots are provided
|
|
|
|
// such that no keys are removed that are uncovered according to any DB
|
|
|
|
// snapshot.
|
|
|
|
// Note this overload does not lazily initialize Rep.
|
Compaction Support for Range Deletion
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
8 years ago
|
|
|
RangeDelAggregator(const InternalKeyComparator& icmp,
|
|
|
|
const std::vector<SequenceNumber>& snapshots,
|
|
|
|
bool collapse_deletions = true);
|
Compaction Support for Range Deletion
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
8 years ago
|
|
|
|
|
|
|
// @param upper_bound Similar to snapshots above, except with a single
|
|
|
|
// snapshot, which allows us to store the snapshot on the stack and defer
|
|
|
|
// initialization of heap-allocating members (in Rep) until the first range
|
|
|
|
// deletion is encountered. This constructor is used in case of reads (get/
|
|
|
|
// iterator), for which only the user snapshot (upper_bound) is provided
|
|
|
|
// such that the seqnum space is divided into two stripes. Only the older
|
|
|
|
// stripe will be used by ShouldDelete().
|
|
|
|
RangeDelAggregator(const InternalKeyComparator& icmp,
|
|
|
|
SequenceNumber upper_bound,
|
|
|
|
bool collapse_deletions = false);
|
|
|
|
|
|
|
|
// Returns whether the key should be deleted, which is the case when it is
|
|
|
|
// covered by a range tombstone residing in the same snapshot stripe.
|
Maintain position in range deletions map
Summary:
When deletion-collapsing mode is enabled (i.e., for DBIter/CompactionIterator), we maintain position in the tombstone maps across calls to ShouldDelete(). Since iterators often access keys sequentially (or reverse-sequentially), scanning forward/backward from the last position can be faster than binary-searching the map for every key.
- When Next() is invoked on an iterator, we use kForwardTraversal to scan forwards, if needed, until arriving at the range deletion containing the next key.
- Similarly for Prev(), we use kBackwardTraversal to scan backwards in the range deletion map.
- When the iterator seeks, we use kBinarySearch for repositioning
- After tombstones are added or before the first ShouldDelete() invocation, the current position is set to invalid, which forces kBinarySearch to be used.
- Non-iterator users (i.e., Get()) use kFullScan, which has the same behavior as before---scan the whole map for every key passed to ShouldDelete().
Closes https://github.com/facebook/rocksdb/pull/1701
Differential Revision: D4350318
Pulled By: ajkr
fbshipit-source-id: 5129b76
8 years ago
|
|
|
// @param mode If collapse_deletions_ is true, this dictates how we will find
|
|
|
|
// the deletion whose interval contains this key. Otherwise, its
|
|
|
|
// value must be kFullScan indicating linear scan from beginning..
|
Range deletion performance improvements + cleanup (#4014)
Summary:
This fixes the same performance issue that #3992 fixes but with much more invasive cleanup.
I'm more excited about this PR because it paves the way for fixing another problem we uncovered at Cockroach where range deletion tombstones can cause massive compactions. For example, suppose L4 contains deletions from [a, c) and [x, z) and no other keys, and L5 is entirely empty. L6, however, is full of data. When compacting L4 -> L5, we'll end up with one file that spans, massively, from [a, z). When we go to compact L5 -> L6, we'll have to rewrite all of L6! If, instead of range deletions in L4, we had keys a, b, x, y, and z, RocksDB would have been smart enough to create two files in L5: one for a and b and another for x, y, and z.
With the changes in this PR, it will be possible to adjust the compaction logic to split tombstones/start new output files when they would span too many files in the grandparent level.
ajkr please take a look when you have a minute!
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4014
Differential Revision: D8773253
Pulled By: ajkr
fbshipit-source-id: ec62fa85f648fdebe1380b83ed997f9baec35677
6 years ago
|
|
|
bool ShouldDelete(
|
|
|
|
const ParsedInternalKey& parsed,
|
|
|
|
RangeDelPositioningMode mode = RangeDelPositioningMode::kFullScan) {
|
|
|
|
if (rep_ == nullptr) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
return ShouldDeleteImpl(parsed, mode);
|
|
|
|
}
|
Range deletion performance improvements + cleanup (#4014)
Summary:
This fixes the same performance issue that #3992 fixes but with much more invasive cleanup.
I'm more excited about this PR because it paves the way for fixing another problem we uncovered at Cockroach where range deletion tombstones can cause massive compactions. For example, suppose L4 contains deletions from [a, c) and [x, z) and no other keys, and L5 is entirely empty. L6, however, is full of data. When compacting L4 -> L5, we'll end up with one file that spans, massively, from [a, z). When we go to compact L5 -> L6, we'll have to rewrite all of L6! If, instead of range deletions in L4, we had keys a, b, x, y, and z, RocksDB would have been smart enough to create two files in L5: one for a and b and another for x, y, and z.
With the changes in this PR, it will be possible to adjust the compaction logic to split tombstones/start new output files when they would span too many files in the grandparent level.
ajkr please take a look when you have a minute!
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4014
Differential Revision: D8773253
Pulled By: ajkr
fbshipit-source-id: ec62fa85f648fdebe1380b83ed997f9baec35677
6 years ago
|
|
|
bool ShouldDelete(
|
|
|
|
const Slice& internal_key,
|
|
|
|
RangeDelPositioningMode mode = RangeDelPositioningMode::kFullScan) {
|
|
|
|
if (rep_ == nullptr) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
return ShouldDeleteImpl(internal_key, mode);
|
|
|
|
}
|
|
|
|
bool ShouldDeleteImpl(const ParsedInternalKey& parsed,
|
Range deletion performance improvements + cleanup (#4014)
Summary:
This fixes the same performance issue that #3992 fixes but with much more invasive cleanup.
I'm more excited about this PR because it paves the way for fixing another problem we uncovered at Cockroach where range deletion tombstones can cause massive compactions. For example, suppose L4 contains deletions from [a, c) and [x, z) and no other keys, and L5 is entirely empty. L6, however, is full of data. When compacting L4 -> L5, we'll end up with one file that spans, massively, from [a, z). When we go to compact L5 -> L6, we'll have to rewrite all of L6! If, instead of range deletions in L4, we had keys a, b, x, y, and z, RocksDB would have been smart enough to create two files in L5: one for a and b and another for x, y, and z.
With the changes in this PR, it will be possible to adjust the compaction logic to split tombstones/start new output files when they would span too many files in the grandparent level.
ajkr please take a look when you have a minute!
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4014
Differential Revision: D8773253
Pulled By: ajkr
fbshipit-source-id: ec62fa85f648fdebe1380b83ed997f9baec35677
6 years ago
|
|
|
RangeDelPositioningMode mode);
|
|
|
|
bool ShouldDeleteImpl(const Slice& internal_key,
|
Range deletion performance improvements + cleanup (#4014)
Summary:
This fixes the same performance issue that #3992 fixes but with much more invasive cleanup.
I'm more excited about this PR because it paves the way for fixing another problem we uncovered at Cockroach where range deletion tombstones can cause massive compactions. For example, suppose L4 contains deletions from [a, c) and [x, z) and no other keys, and L5 is entirely empty. L6, however, is full of data. When compacting L4 -> L5, we'll end up with one file that spans, massively, from [a, z). When we go to compact L5 -> L6, we'll have to rewrite all of L6! If, instead of range deletions in L4, we had keys a, b, x, y, and z, RocksDB would have been smart enough to create two files in L5: one for a and b and another for x, y, and z.
With the changes in this PR, it will be possible to adjust the compaction logic to split tombstones/start new output files when they would span too many files in the grandparent level.
ajkr please take a look when you have a minute!
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4014
Differential Revision: D8773253
Pulled By: ajkr
fbshipit-source-id: ec62fa85f648fdebe1380b83ed997f9baec35677
6 years ago
|
|
|
RangeDelPositioningMode mode);
|
|
|
|
|
|
|
|
// Checks whether range deletions cover any keys between `start` and `end`,
|
|
|
|
// inclusive.
|
|
|
|
//
|
|
|
|
// @param start User key representing beginning of range to check for overlap.
|
|
|
|
// @param end User key representing end of range to check for overlap. This
|
|
|
|
// argument is inclusive, so the existence of a range deletion covering
|
|
|
|
// `end` causes this to return true.
|
|
|
|
bool IsRangeOverlapped(const Slice& start, const Slice& end);
|
|
|
|
|
|
|
|
// Adds tombstones to the tombstone aggregation structure maintained by this
|
|
|
|
// object.
|
|
|
|
// @return non-OK status if any of the tombstone keys are corrupted.
|
|
|
|
Status AddTombstones(std::unique_ptr<InternalIterator> input);
|
|
|
|
|
Maintain position in range deletions map
Summary:
When deletion-collapsing mode is enabled (i.e., for DBIter/CompactionIterator), we maintain position in the tombstone maps across calls to ShouldDelete(). Since iterators often access keys sequentially (or reverse-sequentially), scanning forward/backward from the last position can be faster than binary-searching the map for every key.
- When Next() is invoked on an iterator, we use kForwardTraversal to scan forwards, if needed, until arriving at the range deletion containing the next key.
- Similarly for Prev(), we use kBackwardTraversal to scan backwards in the range deletion map.
- When the iterator seeks, we use kBinarySearch for repositioning
- After tombstones are added or before the first ShouldDelete() invocation, the current position is set to invalid, which forces kBinarySearch to be used.
- Non-iterator users (i.e., Get()) use kFullScan, which has the same behavior as before---scan the whole map for every key passed to ShouldDelete().
Closes https://github.com/facebook/rocksdb/pull/1701
Differential Revision: D4350318
Pulled By: ajkr
fbshipit-source-id: 5129b76
8 years ago
|
|
|
// Resets iterators maintained across calls to ShouldDelete(). This may be
|
|
|
|
// called when the tombstones change, or the owner may call explicitly, e.g.,
|
|
|
|
// if it's an iterator that just seeked to an arbitrary position. The effect
|
|
|
|
// of invalidation is that the following call to ShouldDelete() will binary
|
|
|
|
// search for its tombstone.
|
Range deletion performance improvements + cleanup (#4014)
Summary:
This fixes the same performance issue that #3992 fixes but with much more invasive cleanup.
I'm more excited about this PR because it paves the way for fixing another problem we uncovered at Cockroach where range deletion tombstones can cause massive compactions. For example, suppose L4 contains deletions from [a, c) and [x, z) and no other keys, and L5 is entirely empty. L6, however, is full of data. When compacting L4 -> L5, we'll end up with one file that spans, massively, from [a, z). When we go to compact L5 -> L6, we'll have to rewrite all of L6! If, instead of range deletions in L4, we had keys a, b, x, y, and z, RocksDB would have been smart enough to create two files in L5: one for a and b and another for x, y, and z.
With the changes in this PR, it will be possible to adjust the compaction logic to split tombstones/start new output files when they would span too many files in the grandparent level.
ajkr please take a look when you have a minute!
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4014
Differential Revision: D8773253
Pulled By: ajkr
fbshipit-source-id: ec62fa85f648fdebe1380b83ed997f9baec35677
6 years ago
|
|
|
void InvalidateRangeDelMapPositions();
|
|
|
|
|
|
|
|
bool IsEmpty();
|
|
|
|
bool AddFile(uint64_t file_number);
|
Compaction Support for Range Deletion
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
8 years ago
|
|
|
|
Range deletion performance improvements + cleanup (#4014)
Summary:
This fixes the same performance issue that #3992 fixes but with much more invasive cleanup.
I'm more excited about this PR because it paves the way for fixing another problem we uncovered at Cockroach where range deletion tombstones can cause massive compactions. For example, suppose L4 contains deletions from [a, c) and [x, z) and no other keys, and L5 is entirely empty. L6, however, is full of data. When compacting L4 -> L5, we'll end up with one file that spans, massively, from [a, z). When we go to compact L5 -> L6, we'll have to rewrite all of L6! If, instead of range deletions in L4, we had keys a, b, x, y, and z, RocksDB would have been smart enough to create two files in L5: one for a and b and another for x, y, and z.
With the changes in this PR, it will be possible to adjust the compaction logic to split tombstones/start new output files when they would span too many files in the grandparent level.
ajkr please take a look when you have a minute!
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4014
Differential Revision: D8773253
Pulled By: ajkr
fbshipit-source-id: ec62fa85f648fdebe1380b83ed997f9baec35677
6 years ago
|
|
|
// Create a new iterator over the range deletion tombstones in all of the
|
|
|
|
// snapshot stripes in this aggregator. Tombstones are presented in start key
|
|
|
|
// order. Tombstones with the same start key are presented in arbitrary order.
|
|
|
|
//
|
|
|
|
// The iterator is invalidated after any call to AddTombstones. It is the
|
|
|
|
// caller's responsibility to avoid using invalid iterators.
|
|
|
|
std::unique_ptr<RangeDelIterator> NewIterator();
|
Maintain position in range deletions map
Summary:
When deletion-collapsing mode is enabled (i.e., for DBIter/CompactionIterator), we maintain position in the tombstone maps across calls to ShouldDelete(). Since iterators often access keys sequentially (or reverse-sequentially), scanning forward/backward from the last position can be faster than binary-searching the map for every key.
- When Next() is invoked on an iterator, we use kForwardTraversal to scan forwards, if needed, until arriving at the range deletion containing the next key.
- Similarly for Prev(), we use kBackwardTraversal to scan backwards in the range deletion map.
- When the iterator seeks, we use kBinarySearch for repositioning
- After tombstones are added or before the first ShouldDelete() invocation, the current position is set to invalid, which forces kBinarySearch to be used.
- Non-iterator users (i.e., Get()) use kFullScan, which has the same behavior as before---scan the whole map for every key passed to ShouldDelete().
Closes https://github.com/facebook/rocksdb/pull/1701
Differential Revision: D4350318
Pulled By: ajkr
fbshipit-source-id: 5129b76
8 years ago
|
|
|
|
Range deletion performance improvements + cleanup (#4014)
Summary:
This fixes the same performance issue that #3992 fixes but with much more invasive cleanup.
I'm more excited about this PR because it paves the way for fixing another problem we uncovered at Cockroach where range deletion tombstones can cause massive compactions. For example, suppose L4 contains deletions from [a, c) and [x, z) and no other keys, and L5 is entirely empty. L6, however, is full of data. When compacting L4 -> L5, we'll end up with one file that spans, massively, from [a, z). When we go to compact L5 -> L6, we'll have to rewrite all of L6! If, instead of range deletions in L4, we had keys a, b, x, y, and z, RocksDB would have been smart enough to create two files in L5: one for a and b and another for x, y, and z.
With the changes in this PR, it will be possible to adjust the compaction logic to split tombstones/start new output files when they would span too many files in the grandparent level.
ajkr please take a look when you have a minute!
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4014
Differential Revision: D8773253
Pulled By: ajkr
fbshipit-source-id: ec62fa85f648fdebe1380b83ed997f9baec35677
6 years ago
|
|
|
private:
|
Compaction Support for Range Deletion
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
8 years ago
|
|
|
// Maps snapshot seqnum -> map of tombstones that fall in that stripe, i.e.,
|
|
|
|
// their seqnums are greater than the next smaller snapshot's seqnum.
|
Range deletion performance improvements + cleanup (#4014)
Summary:
This fixes the same performance issue that #3992 fixes but with much more invasive cleanup.
I'm more excited about this PR because it paves the way for fixing another problem we uncovered at Cockroach where range deletion tombstones can cause massive compactions. For example, suppose L4 contains deletions from [a, c) and [x, z) and no other keys, and L5 is entirely empty. L6, however, is full of data. When compacting L4 -> L5, we'll end up with one file that spans, massively, from [a, z). When we go to compact L5 -> L6, we'll have to rewrite all of L6! If, instead of range deletions in L4, we had keys a, b, x, y, and z, RocksDB would have been smart enough to create two files in L5: one for a and b and another for x, y, and z.
With the changes in this PR, it will be possible to adjust the compaction logic to split tombstones/start new output files when they would span too many files in the grandparent level.
ajkr please take a look when you have a minute!
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4014
Differential Revision: D8773253
Pulled By: ajkr
fbshipit-source-id: ec62fa85f648fdebe1380b83ed997f9baec35677
6 years ago
|
|
|
typedef std::map<SequenceNumber, std::unique_ptr<RangeDelMap>> StripeMap;
|
Compaction Support for Range Deletion
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
8 years ago
|
|
|
|
|
|
|
struct Rep {
|
|
|
|
StripeMap stripe_map_;
|
|
|
|
PinnedIteratorsManager pinned_iters_mgr_;
|
|
|
|
std::set<uint64_t> added_files_;
|
|
|
|
};
|
|
|
|
// Initializes rep_ lazily. This aggregator object is constructed for every
|
|
|
|
// read, so expensive members should only be created when necessary, i.e.,
|
|
|
|
// once the first range deletion is encountered.
|
|
|
|
void InitRep(const std::vector<SequenceNumber>& snapshots);
|
|
|
|
|
Range deletion performance improvements + cleanup (#4014)
Summary:
This fixes the same performance issue that #3992 fixes but with much more invasive cleanup.
I'm more excited about this PR because it paves the way for fixing another problem we uncovered at Cockroach where range deletion tombstones can cause massive compactions. For example, suppose L4 contains deletions from [a, c) and [x, z) and no other keys, and L5 is entirely empty. L6, however, is full of data. When compacting L4 -> L5, we'll end up with one file that spans, massively, from [a, z). When we go to compact L5 -> L6, we'll have to rewrite all of L6! If, instead of range deletions in L4, we had keys a, b, x, y, and z, RocksDB would have been smart enough to create two files in L5: one for a and b and another for x, y, and z.
With the changes in this PR, it will be possible to adjust the compaction logic to split tombstones/start new output files when they would span too many files in the grandparent level.
ajkr please take a look when you have a minute!
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4014
Differential Revision: D8773253
Pulled By: ajkr
fbshipit-source-id: ec62fa85f648fdebe1380b83ed997f9baec35677
6 years ago
|
|
|
std::unique_ptr<RangeDelMap> NewRangeDelMap();
|
|
|
|
RangeDelMap& GetRangeDelMap(SequenceNumber seq);
|
Compaction Support for Range Deletion
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
8 years ago
|
|
|
|
|
|
|
SequenceNumber upper_bound_;
|
|
|
|
std::unique_ptr<Rep> rep_;
|
|
|
|
const InternalKeyComparator& icmp_;
|
|
|
|
// collapse range deletions so they're binary searchable
|
|
|
|
const bool collapse_deletions_;
|
Compaction Support for Range Deletion
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
8 years ago
|
|
|
};
|
|
|
|
|
Compaction Support for Range Deletion
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
8 years ago
|
|
|
} // namespace rocksdb
|