|
|
|
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
|
|
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
|
|
// (found in the LICENSE.Apache file in the root directory).
|
|
|
|
//
|
|
|
|
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
|
|
|
|
// Use of this source code is governed by a BSD-style license that can be
|
|
|
|
// found in the LICENSE file. See the AUTHORS file for names of contributors.
|
|
|
|
|
|
|
|
#pragma once
|
|
|
|
|
|
|
|
#include <stdint.h>
|
Add more LSM info to FilterBuildingContext (#8246)
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
4 years ago
|
|
|
|
Add more table properties to EventLogger
Summary:
Example output:
{"time_micros": 1431463794310521, "job": 353, "event": "table_file_creation", "file_number": 387, "file_size": 86937, "table_info": {"data_size": "81801", "index_size": "9751", "filter_size": "0", "raw_key_size": "23448", "raw_average_key_size": "24.000000", "raw_value_size": "990571", "raw_average_value_size": "1013.890481", "num_data_blocks": "245", "num_entries": "977", "filter_policy_name": "", "kDeletedKeys": "0"}}
Also fixed a bug where BuildTable() in recovery was passing Env::IOHigh argument into paranoid_checks_file parameter.
Test Plan: make check + check out the output in the log
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38343
10 years ago
|
|
|
#include <string>
|
|
|
|
#include <utility>
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
10 years ago
|
|
|
#include <vector>
|
Add more LSM info to FilterBuildingContext (#8246)
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
4 years ago
|
|
|
|
|
|
|
#include "db/dbformat.h"
|
|
|
|
#include "db/seqno_to_time_mapping.h"
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
10 years ago
|
|
|
#include "db/table_properties_collector.h"
|
|
|
|
#include "file/writable_file_writer.h"
|
|
|
|
#include "options/cf_options.h"
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
10 years ago
|
|
|
#include "rocksdb/options.h"
|
Add more table properties to EventLogger
Summary:
Example output:
{"time_micros": 1431463794310521, "job": 353, "event": "table_file_creation", "file_number": 387, "file_size": 86937, "table_info": {"data_size": "81801", "index_size": "9751", "filter_size": "0", "raw_key_size": "23448", "raw_average_key_size": "24.000000", "raw_value_size": "990571", "raw_average_value_size": "1013.890481", "num_data_blocks": "245", "num_entries": "977", "filter_policy_name": "", "kDeletedKeys": "0"}}
Also fixed a bug where BuildTable() in recovery was passing Env::IOHigh argument into paranoid_checks_file parameter.
Test Plan: make check + check out the output in the log
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38343
10 years ago
|
|
|
#include "rocksdb/table_properties.h"
|
Always verify SST unique IDs on SST file open (#10532)
Summary:
Although we've been tracking SST unique IDs in the DB manifest
unconditionally, checking has been opt-in and with an extra pass at DB::Open
time. This changes the behavior of `verify_sst_unique_id_in_manifest` to
check unique ID against manifest every time an SST file is opened through
table cache (normal DB operations), replacing the explicit pass over files
at DB::Open time. This change also enables the option by default and
removes the "EXPERIMENTAL" designation.
One possible criticism is that the option no longer ensures the integrity
of a DB at Open time. This is far from an all-or-nothing issue. Verifying
the IDs of all SST files hardly ensures all the data in the DB is readable.
(VerifyChecksum is supposed to do that.) Also, with
max_open_files=-1 (default, extremely common), all SST files are
opened at DB::Open time anyway.
Implementation details:
* `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass
that is now removed.
* Unit tests that manipulate/corrupt table properties have to opt out of
this check, because that corrupts the "actual" unique id. (And even for
testing we don't currently have a mechanism to set "no unique id"
in the in-memory file metadata for new files.)
* A lot of other unit test churn relates to (a) default checking on, and
(b) checking on SST open even without DB::Open (e.g. on flush)
* Use `FileMetaData` for more `TableCache` operations (in place of
`FileDescriptor`) so that we have access to the unique_id whenever
we might need to open an SST file. **There is the possibility of
performance impact because we can no longer use the more
localized `fd` part of an `FdWithKeyRange` but instead follow the
`file_metadata` pointer. However, this change (possible regression)
is only done for `GetMemoryUsageByTableReaders`.**
* Removed a completely unnecessary constructor overload of
`TableReaderOptions`
Possible follow-up:
* Verification only happens when opening through table cache. Are there
more places where this should happen?
* Improve error message when there is a file size mismatch vs. manifest
(FIXME added in the appropriate place).
* I'm not sure there's a justification for `FileDescriptor` to be distinct from
`FileMetaData`.
* I'm skeptical that `FdWithKeyRange` really still makes sense for
optimizing some data locality by duplicating some data in memory, but I
could be wrong.
* An unnecessary overload of NewTableReader was recently added, in
the public API nonetheless (though unusable there). It should be cleaned
up to put most things under `TableReaderOptions`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532
Test Plan:
updated unit tests
Performance test showing no significant difference (just noise I think):
`./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000`
Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec
After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec
Reviewed By: jay-zhuang
Differential Revision: D38765551
Pulled By: pdillinger
fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
2 years ago
|
|
|
#include "table/unique_id_impl.h"
|
|
|
|
#include "trace_replay/block_cache_tracer.h"
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
10 years ago
|
|
|
|
|
|
|
namespace ROCKSDB_NAMESPACE {
|
|
|
|
|
|
|
|
class Slice;
|
|
|
|
class Status;
|
|
|
|
|
|
|
|
struct TableReaderOptions {
|
Skip bottom-level filter block caching when hit-optimized
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.
- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr
Test Plan:
updated unit test:
$ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits
will also run 'make check'
Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D51633
9 years ago
|
|
|
// @param skip_filters Disables loading/accessing the filter block
|
|
|
|
TableReaderOptions(
|
|
|
|
const ImmutableOptions& _ioptions,
|
|
|
|
const std::shared_ptr<const SliceTransform>& _prefix_extractor,
|
|
|
|
const EnvOptions& _env_options,
|
|
|
|
const InternalKeyComparator& _internal_comparator,
|
|
|
|
uint8_t _block_protection_bytes_per_key, bool _skip_filters = false,
|
|
|
|
bool _immortal = false, bool _force_direct_prefetch = false,
|
|
|
|
int _level = -1, BlockCacheTracer* const _block_cache_tracer = nullptr,
|
|
|
|
size_t _max_file_size_for_l0_meta_pin = 0,
|
Always verify SST unique IDs on SST file open (#10532)
Summary:
Although we've been tracking SST unique IDs in the DB manifest
unconditionally, checking has been opt-in and with an extra pass at DB::Open
time. This changes the behavior of `verify_sst_unique_id_in_manifest` to
check unique ID against manifest every time an SST file is opened through
table cache (normal DB operations), replacing the explicit pass over files
at DB::Open time. This change also enables the option by default and
removes the "EXPERIMENTAL" designation.
One possible criticism is that the option no longer ensures the integrity
of a DB at Open time. This is far from an all-or-nothing issue. Verifying
the IDs of all SST files hardly ensures all the data in the DB is readable.
(VerifyChecksum is supposed to do that.) Also, with
max_open_files=-1 (default, extremely common), all SST files are
opened at DB::Open time anyway.
Implementation details:
* `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass
that is now removed.
* Unit tests that manipulate/corrupt table properties have to opt out of
this check, because that corrupts the "actual" unique id. (And even for
testing we don't currently have a mechanism to set "no unique id"
in the in-memory file metadata for new files.)
* A lot of other unit test churn relates to (a) default checking on, and
(b) checking on SST open even without DB::Open (e.g. on flush)
* Use `FileMetaData` for more `TableCache` operations (in place of
`FileDescriptor`) so that we have access to the unique_id whenever
we might need to open an SST file. **There is the possibility of
performance impact because we can no longer use the more
localized `fd` part of an `FdWithKeyRange` but instead follow the
`file_metadata` pointer. However, this change (possible regression)
is only done for `GetMemoryUsageByTableReaders`.**
* Removed a completely unnecessary constructor overload of
`TableReaderOptions`
Possible follow-up:
* Verification only happens when opening through table cache. Are there
more places where this should happen?
* Improve error message when there is a file size mismatch vs. manifest
(FIXME added in the appropriate place).
* I'm not sure there's a justification for `FileDescriptor` to be distinct from
`FileMetaData`.
* I'm skeptical that `FdWithKeyRange` really still makes sense for
optimizing some data locality by duplicating some data in memory, but I
could be wrong.
* An unnecessary overload of NewTableReader was recently added, in
the public API nonetheless (though unusable there). It should be cleaned
up to put most things under `TableReaderOptions`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532
Test Plan:
updated unit tests
Performance test showing no significant difference (just noise I think):
`./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000`
Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec
After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec
Reviewed By: jay-zhuang
Differential Revision: D38765551
Pulled By: pdillinger
fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
2 years ago
|
|
|
const std::string& _cur_db_session_id = "", uint64_t _cur_file_num = 0,
|
Record and use the tail size to prefetch table tail (#11406)
Summary:
**Context:**
We prefetch the tail part of a SST file (i.e, the blocks after data blocks till the end of the file) during each SST file open in hope to prefetch all the stuff at once ahead of time for later read e.g, footer, meta index, filter/index etc. The existing approach to estimate the tail size to prefetch is through `TailPrefetchStats` heuristics introduced in https://github.com/facebook/rocksdb/pull/4156, which has caused small reads in unlucky case (e.g, small read into the tail buffer during table open in thread 1 under the same BlockBasedTableFactory object can make thread 2's tail prefetching use a small size that it shouldn't) and is hard to debug. Therefore we decide to record the exact tail size and use it directly to prefetch tail of the SST instead of relying heuristics.
**Summary:**
- Obtain and record in manifest the tail size in `BlockBasedTableBuilder::Finish()`
- For backward compatibility, we fall back to TailPrefetchStats and last to simple heuristics that the tail size is a linear portion of the file size - see PR conversation for more.
- Make`tail_start_offset` part of the table properties and deduct tail size to record in manifest for external files (e.g, file ingestion, import CF) and db repair (with no access to manifest).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11406
Test Plan:
1. New UT
2. db bench
Note: db bench on /tmp/ where direct read is supported is too slow to finish and the default pinning setting in db bench is not helpful to profile # sst read of Get. Therefore I hacked the following to obtain the following comparison.
```
diff --git a/table/block_based/block_based_table_reader.cc b/table/block_based/block_based_table_reader.cc
index bd5669f0f..791484c1f 100644
--- a/table/block_based/block_based_table_reader.cc
+++ b/table/block_based/block_based_table_reader.cc
@@ -838,7 +838,7 @@ Status BlockBasedTable::PrefetchTail(
&tail_prefetch_size);
// Try file system prefetch
- if (!file->use_direct_io() && !force_direct_prefetch) {
+ if (false && !file->use_direct_io() && !force_direct_prefetch) {
if (!file->Prefetch(prefetch_off, prefetch_len, ro.rate_limiter_priority)
.IsNotSupported()) {
prefetch_buffer->reset(new FilePrefetchBuffer(
diff --git a/tools/db_bench_tool.cc b/tools/db_bench_tool.cc
index ea40f5fa0..39a0ac385 100644
--- a/tools/db_bench_tool.cc
+++ b/tools/db_bench_tool.cc
@@ -4191,6 +4191,8 @@ class Benchmark {
std::shared_ptr<TableFactory>(NewCuckooTableFactory(table_options));
} else {
BlockBasedTableOptions block_based_options;
+ block_based_options.metadata_cache_options.partition_pinning =
+ PinningTier::kAll;
block_based_options.checksum =
static_cast<ChecksumType>(FLAGS_checksum_type);
if (FLAGS_use_hash_search) {
```
Create DB
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
ReadRandom
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
(a) Existing (Use TailPrefetchStats for tail size + use seperate prefetch buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 3395
rocksdb.sst.read.micros P50 : 5.655570 P95 : 9.931396 P99 : 14.845454 P100 : 585.000000 COUNT : 999905 SUM : 6590614
```
(b) This PR (Record tail size + use the same tail buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 14257
rocksdb.sst.read.micros P50 : 5.173347 P95 : 9.015017 P99 : 12.912610 P100 : 228.000000 COUNT : 998547 SUM : 5976540
```
As we can see, we increase the prefetch tail hit count and decrease SST read count with this PR
3. Test backward compatibility by stepping through reading with post-PR code on a db generated pre-PR.
Reviewed By: pdillinger
Differential Revision: D45413346
Pulled By: hx235
fbshipit-source-id: 7d5e36a60a72477218f79905168d688452a4c064
2 years ago
|
|
|
UniqueId64x2 _unique_id = {}, SequenceNumber _largest_seqno = 0,
|
Add support to strip / pad timestamp when creating / reading a block based table (#11495)
Summary:
Add support to strip timestamp in block based table builder and pad timestamp in block based table reader.
On the write path, use the per column family option `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` to indicate whether user-defined timestamps should be stripped for all block based tables created for the column family.
On the read path, added a per table `TableReadOption.user_defined_timestamps_persisted` to flag whether the user keys in the table contains user defined timestamps.
This patch is mostly passing the related flags down to the block building/parsing level with the exception of handling the `first_internal_key` in `IndexValue`, which is included in the `IndexBuilder` level. The value part of range deletion entries should have a similar handling, I haven't decided where to best fit this piece of logic, I will do it in a follow up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11495
Test Plan:
Existing test `BlockBasedTableReaderTest` is parameterized to run with:
1) different UDT test modes: kNone, kNormal, kStripUserDefinedTimestamp
2) all four index types, when index type is `kTwoLevelIndexSearch`, also enables partitioned filters
3) parallel vs non-parallel compression
4) enable/disable compression dictionary.
Also added tests for API `BlockBasedTableReader::NewIterator`.
`PartitionedFilterBlockTest` is parameterized to run with different UDT test modes:kNone, kNormal, kStripUserDefinedTimestamp.
```
make all check
./block_based_table_reader_test
./partitioned_filter_block_test
```
Reviewed By: ltamasi
Differential Revision: D46344577
Pulled By: jowlyzhang
fbshipit-source-id: 93ac8542b19319d1298712b8bed908c8831ba675
2 years ago
|
|
|
uint64_t _tail_size = 0, bool _user_defined_timestamps_persisted = true)
|
|
|
|
: ioptions(_ioptions),
|
|
|
|
prefix_extractor(_prefix_extractor),
|
|
|
|
env_options(_env_options),
|
Skip bottom-level filter block caching when hit-optimized
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.
- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr
Test Plan:
updated unit test:
$ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits
will also run 'make check'
Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D51633
9 years ago
|
|
|
internal_comparator(_internal_comparator),
|
Adding pin_l0_filter_and_index_blocks_in_cache feature and related fixes.
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
Test Plan:
'export TEST_TMPDIR=/dev/shm/ && DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32' is OK.
I didn't run the Java tests, I don't have Java set up on my devserver.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56133
9 years ago
|
|
|
skip_filters(_skip_filters),
|
|
|
|
immortal(_immortal),
|
|
|
|
force_direct_prefetch(_force_direct_prefetch),
|
|
|
|
level(_level),
|
|
|
|
largest_seqno(_largest_seqno),
|
|
|
|
block_cache_tracer(_block_cache_tracer),
|
|
|
|
max_file_size_for_l0_meta_pin(_max_file_size_for_l0_meta_pin),
|
|
|
|
cur_db_session_id(_cur_db_session_id),
|
Always verify SST unique IDs on SST file open (#10532)
Summary:
Although we've been tracking SST unique IDs in the DB manifest
unconditionally, checking has been opt-in and with an extra pass at DB::Open
time. This changes the behavior of `verify_sst_unique_id_in_manifest` to
check unique ID against manifest every time an SST file is opened through
table cache (normal DB operations), replacing the explicit pass over files
at DB::Open time. This change also enables the option by default and
removes the "EXPERIMENTAL" designation.
One possible criticism is that the option no longer ensures the integrity
of a DB at Open time. This is far from an all-or-nothing issue. Verifying
the IDs of all SST files hardly ensures all the data in the DB is readable.
(VerifyChecksum is supposed to do that.) Also, with
max_open_files=-1 (default, extremely common), all SST files are
opened at DB::Open time anyway.
Implementation details:
* `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass
that is now removed.
* Unit tests that manipulate/corrupt table properties have to opt out of
this check, because that corrupts the "actual" unique id. (And even for
testing we don't currently have a mechanism to set "no unique id"
in the in-memory file metadata for new files.)
* A lot of other unit test churn relates to (a) default checking on, and
(b) checking on SST open even without DB::Open (e.g. on flush)
* Use `FileMetaData` for more `TableCache` operations (in place of
`FileDescriptor`) so that we have access to the unique_id whenever
we might need to open an SST file. **There is the possibility of
performance impact because we can no longer use the more
localized `fd` part of an `FdWithKeyRange` but instead follow the
`file_metadata` pointer. However, this change (possible regression)
is only done for `GetMemoryUsageByTableReaders`.**
* Removed a completely unnecessary constructor overload of
`TableReaderOptions`
Possible follow-up:
* Verification only happens when opening through table cache. Are there
more places where this should happen?
* Improve error message when there is a file size mismatch vs. manifest
(FIXME added in the appropriate place).
* I'm not sure there's a justification for `FileDescriptor` to be distinct from
`FileMetaData`.
* I'm skeptical that `FdWithKeyRange` really still makes sense for
optimizing some data locality by duplicating some data in memory, but I
could be wrong.
* An unnecessary overload of NewTableReader was recently added, in
the public API nonetheless (though unusable there). It should be cleaned
up to put most things under `TableReaderOptions`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532
Test Plan:
updated unit tests
Performance test showing no significant difference (just noise I think):
`./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000`
Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec
After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec
Reviewed By: jay-zhuang
Differential Revision: D38765551
Pulled By: pdillinger
fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
2 years ago
|
|
|
cur_file_num(_cur_file_num),
|
|
|
|
unique_id(_unique_id),
|
Record and use the tail size to prefetch table tail (#11406)
Summary:
**Context:**
We prefetch the tail part of a SST file (i.e, the blocks after data blocks till the end of the file) during each SST file open in hope to prefetch all the stuff at once ahead of time for later read e.g, footer, meta index, filter/index etc. The existing approach to estimate the tail size to prefetch is through `TailPrefetchStats` heuristics introduced in https://github.com/facebook/rocksdb/pull/4156, which has caused small reads in unlucky case (e.g, small read into the tail buffer during table open in thread 1 under the same BlockBasedTableFactory object can make thread 2's tail prefetching use a small size that it shouldn't) and is hard to debug. Therefore we decide to record the exact tail size and use it directly to prefetch tail of the SST instead of relying heuristics.
**Summary:**
- Obtain and record in manifest the tail size in `BlockBasedTableBuilder::Finish()`
- For backward compatibility, we fall back to TailPrefetchStats and last to simple heuristics that the tail size is a linear portion of the file size - see PR conversation for more.
- Make`tail_start_offset` part of the table properties and deduct tail size to record in manifest for external files (e.g, file ingestion, import CF) and db repair (with no access to manifest).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11406
Test Plan:
1. New UT
2. db bench
Note: db bench on /tmp/ where direct read is supported is too slow to finish and the default pinning setting in db bench is not helpful to profile # sst read of Get. Therefore I hacked the following to obtain the following comparison.
```
diff --git a/table/block_based/block_based_table_reader.cc b/table/block_based/block_based_table_reader.cc
index bd5669f0f..791484c1f 100644
--- a/table/block_based/block_based_table_reader.cc
+++ b/table/block_based/block_based_table_reader.cc
@@ -838,7 +838,7 @@ Status BlockBasedTable::PrefetchTail(
&tail_prefetch_size);
// Try file system prefetch
- if (!file->use_direct_io() && !force_direct_prefetch) {
+ if (false && !file->use_direct_io() && !force_direct_prefetch) {
if (!file->Prefetch(prefetch_off, prefetch_len, ro.rate_limiter_priority)
.IsNotSupported()) {
prefetch_buffer->reset(new FilePrefetchBuffer(
diff --git a/tools/db_bench_tool.cc b/tools/db_bench_tool.cc
index ea40f5fa0..39a0ac385 100644
--- a/tools/db_bench_tool.cc
+++ b/tools/db_bench_tool.cc
@@ -4191,6 +4191,8 @@ class Benchmark {
std::shared_ptr<TableFactory>(NewCuckooTableFactory(table_options));
} else {
BlockBasedTableOptions block_based_options;
+ block_based_options.metadata_cache_options.partition_pinning =
+ PinningTier::kAll;
block_based_options.checksum =
static_cast<ChecksumType>(FLAGS_checksum_type);
if (FLAGS_use_hash_search) {
```
Create DB
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
ReadRandom
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
(a) Existing (Use TailPrefetchStats for tail size + use seperate prefetch buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 3395
rocksdb.sst.read.micros P50 : 5.655570 P95 : 9.931396 P99 : 14.845454 P100 : 585.000000 COUNT : 999905 SUM : 6590614
```
(b) This PR (Record tail size + use the same tail buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 14257
rocksdb.sst.read.micros P50 : 5.173347 P95 : 9.015017 P99 : 12.912610 P100 : 228.000000 COUNT : 998547 SUM : 5976540
```
As we can see, we increase the prefetch tail hit count and decrease SST read count with this PR
3. Test backward compatibility by stepping through reading with post-PR code on a db generated pre-PR.
Reviewed By: pdillinger
Differential Revision: D45413346
Pulled By: hx235
fbshipit-source-id: 7d5e36a60a72477218f79905168d688452a4c064
2 years ago
|
|
|
block_protection_bytes_per_key(_block_protection_bytes_per_key),
|
Add support to strip / pad timestamp when creating / reading a block based table (#11495)
Summary:
Add support to strip timestamp in block based table builder and pad timestamp in block based table reader.
On the write path, use the per column family option `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` to indicate whether user-defined timestamps should be stripped for all block based tables created for the column family.
On the read path, added a per table `TableReadOption.user_defined_timestamps_persisted` to flag whether the user keys in the table contains user defined timestamps.
This patch is mostly passing the related flags down to the block building/parsing level with the exception of handling the `first_internal_key` in `IndexValue`, which is included in the `IndexBuilder` level. The value part of range deletion entries should have a similar handling, I haven't decided where to best fit this piece of logic, I will do it in a follow up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11495
Test Plan:
Existing test `BlockBasedTableReaderTest` is parameterized to run with:
1) different UDT test modes: kNone, kNormal, kStripUserDefinedTimestamp
2) all four index types, when index type is `kTwoLevelIndexSearch`, also enables partitioned filters
3) parallel vs non-parallel compression
4) enable/disable compression dictionary.
Also added tests for API `BlockBasedTableReader::NewIterator`.
`PartitionedFilterBlockTest` is parameterized to run with different UDT test modes:kNone, kNormal, kStripUserDefinedTimestamp.
```
make all check
./block_based_table_reader_test
./partitioned_filter_block_test
```
Reviewed By: ltamasi
Differential Revision: D46344577
Pulled By: jowlyzhang
fbshipit-source-id: 93ac8542b19319d1298712b8bed908c8831ba675
2 years ago
|
|
|
tail_size(_tail_size),
|
|
|
|
user_defined_timestamps_persisted(_user_defined_timestamps_persisted) {}
|
|
|
|
|
|
|
|
const ImmutableOptions& ioptions;
|
|
|
|
const std::shared_ptr<const SliceTransform>& prefix_extractor;
|
|
|
|
const EnvOptions& env_options;
|
|
|
|
const InternalKeyComparator& internal_comparator;
|
Skip bottom-level filter block caching when hit-optimized
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.
- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr
Test Plan:
updated unit test:
$ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits
will also run 'make check'
Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D51633
9 years ago
|
|
|
// This is only used for BlockBasedTable (reader)
|
|
|
|
bool skip_filters;
|
|
|
|
// Whether the table will be valid as long as the DB is open
|
|
|
|
bool immortal;
|
|
|
|
// When data prefetching is needed, even if direct I/O is off, read data to
|
|
|
|
// fetch into RocksDB's buffer, rather than relying
|
|
|
|
// RandomAccessFile::Prefetch().
|
|
|
|
bool force_direct_prefetch;
|
Add more LSM info to FilterBuildingContext (#8246)
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
4 years ago
|
|
|
// What level this table/file is on, -1 for "not set, don't know." Used
|
|
|
|
// for level-specific statistics.
|
Adding pin_l0_filter_and_index_blocks_in_cache feature and related fixes.
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
Test Plan:
'export TEST_TMPDIR=/dev/shm/ && DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32' is OK.
I didn't run the Java tests, I don't have Java set up on my devserver.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56133
9 years ago
|
|
|
int level;
|
Always verify SST unique IDs on SST file open (#10532)
Summary:
Although we've been tracking SST unique IDs in the DB manifest
unconditionally, checking has been opt-in and with an extra pass at DB::Open
time. This changes the behavior of `verify_sst_unique_id_in_manifest` to
check unique ID against manifest every time an SST file is opened through
table cache (normal DB operations), replacing the explicit pass over files
at DB::Open time. This change also enables the option by default and
removes the "EXPERIMENTAL" designation.
One possible criticism is that the option no longer ensures the integrity
of a DB at Open time. This is far from an all-or-nothing issue. Verifying
the IDs of all SST files hardly ensures all the data in the DB is readable.
(VerifyChecksum is supposed to do that.) Also, with
max_open_files=-1 (default, extremely common), all SST files are
opened at DB::Open time anyway.
Implementation details:
* `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass
that is now removed.
* Unit tests that manipulate/corrupt table properties have to opt out of
this check, because that corrupts the "actual" unique id. (And even for
testing we don't currently have a mechanism to set "no unique id"
in the in-memory file metadata for new files.)
* A lot of other unit test churn relates to (a) default checking on, and
(b) checking on SST open even without DB::Open (e.g. on flush)
* Use `FileMetaData` for more `TableCache` operations (in place of
`FileDescriptor`) so that we have access to the unique_id whenever
we might need to open an SST file. **There is the possibility of
performance impact because we can no longer use the more
localized `fd` part of an `FdWithKeyRange` but instead follow the
`file_metadata` pointer. However, this change (possible regression)
is only done for `GetMemoryUsageByTableReaders`.**
* Removed a completely unnecessary constructor overload of
`TableReaderOptions`
Possible follow-up:
* Verification only happens when opening through table cache. Are there
more places where this should happen?
* Improve error message when there is a file size mismatch vs. manifest
(FIXME added in the appropriate place).
* I'm not sure there's a justification for `FileDescriptor` to be distinct from
`FileMetaData`.
* I'm skeptical that `FdWithKeyRange` really still makes sense for
optimizing some data locality by duplicating some data in memory, but I
could be wrong.
* An unnecessary overload of NewTableReader was recently added, in
the public API nonetheless (though unusable there). It should be cleaned
up to put most things under `TableReaderOptions`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532
Test Plan:
updated unit tests
Performance test showing no significant difference (just noise I think):
`./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000`
Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec
After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec
Reviewed By: jay-zhuang
Differential Revision: D38765551
Pulled By: pdillinger
fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
2 years ago
|
|
|
// largest seqno in the table (or 0 means unknown???)
|
|
|
|
SequenceNumber largest_seqno;
|
|
|
|
BlockCacheTracer* const block_cache_tracer;
|
|
|
|
// Largest L0 file size whose meta-blocks may be pinned (can be zero when
|
|
|
|
// unknown).
|
|
|
|
const size_t max_file_size_for_l0_meta_pin;
|
|
|
|
|
|
|
|
std::string cur_db_session_id;
|
|
|
|
|
|
|
|
uint64_t cur_file_num;
|
Always verify SST unique IDs on SST file open (#10532)
Summary:
Although we've been tracking SST unique IDs in the DB manifest
unconditionally, checking has been opt-in and with an extra pass at DB::Open
time. This changes the behavior of `verify_sst_unique_id_in_manifest` to
check unique ID against manifest every time an SST file is opened through
table cache (normal DB operations), replacing the explicit pass over files
at DB::Open time. This change also enables the option by default and
removes the "EXPERIMENTAL" designation.
One possible criticism is that the option no longer ensures the integrity
of a DB at Open time. This is far from an all-or-nothing issue. Verifying
the IDs of all SST files hardly ensures all the data in the DB is readable.
(VerifyChecksum is supposed to do that.) Also, with
max_open_files=-1 (default, extremely common), all SST files are
opened at DB::Open time anyway.
Implementation details:
* `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass
that is now removed.
* Unit tests that manipulate/corrupt table properties have to opt out of
this check, because that corrupts the "actual" unique id. (And even for
testing we don't currently have a mechanism to set "no unique id"
in the in-memory file metadata for new files.)
* A lot of other unit test churn relates to (a) default checking on, and
(b) checking on SST open even without DB::Open (e.g. on flush)
* Use `FileMetaData` for more `TableCache` operations (in place of
`FileDescriptor`) so that we have access to the unique_id whenever
we might need to open an SST file. **There is the possibility of
performance impact because we can no longer use the more
localized `fd` part of an `FdWithKeyRange` but instead follow the
`file_metadata` pointer. However, this change (possible regression)
is only done for `GetMemoryUsageByTableReaders`.**
* Removed a completely unnecessary constructor overload of
`TableReaderOptions`
Possible follow-up:
* Verification only happens when opening through table cache. Are there
more places where this should happen?
* Improve error message when there is a file size mismatch vs. manifest
(FIXME added in the appropriate place).
* I'm not sure there's a justification for `FileDescriptor` to be distinct from
`FileMetaData`.
* I'm skeptical that `FdWithKeyRange` really still makes sense for
optimizing some data locality by duplicating some data in memory, but I
could be wrong.
* An unnecessary overload of NewTableReader was recently added, in
the public API nonetheless (though unusable there). It should be cleaned
up to put most things under `TableReaderOptions`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532
Test Plan:
updated unit tests
Performance test showing no significant difference (just noise I think):
`./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000`
Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec
After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec
Reviewed By: jay-zhuang
Differential Revision: D38765551
Pulled By: pdillinger
fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
2 years ago
|
|
|
|
|
|
|
// Known unique_id or {}, kNullUniqueId64x2 means unknown
|
|
|
|
UniqueId64x2 unique_id;
|
|
|
|
|
|
|
|
uint8_t block_protection_bytes_per_key;
|
Record and use the tail size to prefetch table tail (#11406)
Summary:
**Context:**
We prefetch the tail part of a SST file (i.e, the blocks after data blocks till the end of the file) during each SST file open in hope to prefetch all the stuff at once ahead of time for later read e.g, footer, meta index, filter/index etc. The existing approach to estimate the tail size to prefetch is through `TailPrefetchStats` heuristics introduced in https://github.com/facebook/rocksdb/pull/4156, which has caused small reads in unlucky case (e.g, small read into the tail buffer during table open in thread 1 under the same BlockBasedTableFactory object can make thread 2's tail prefetching use a small size that it shouldn't) and is hard to debug. Therefore we decide to record the exact tail size and use it directly to prefetch tail of the SST instead of relying heuristics.
**Summary:**
- Obtain and record in manifest the tail size in `BlockBasedTableBuilder::Finish()`
- For backward compatibility, we fall back to TailPrefetchStats and last to simple heuristics that the tail size is a linear portion of the file size - see PR conversation for more.
- Make`tail_start_offset` part of the table properties and deduct tail size to record in manifest for external files (e.g, file ingestion, import CF) and db repair (with no access to manifest).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11406
Test Plan:
1. New UT
2. db bench
Note: db bench on /tmp/ where direct read is supported is too slow to finish and the default pinning setting in db bench is not helpful to profile # sst read of Get. Therefore I hacked the following to obtain the following comparison.
```
diff --git a/table/block_based/block_based_table_reader.cc b/table/block_based/block_based_table_reader.cc
index bd5669f0f..791484c1f 100644
--- a/table/block_based/block_based_table_reader.cc
+++ b/table/block_based/block_based_table_reader.cc
@@ -838,7 +838,7 @@ Status BlockBasedTable::PrefetchTail(
&tail_prefetch_size);
// Try file system prefetch
- if (!file->use_direct_io() && !force_direct_prefetch) {
+ if (false && !file->use_direct_io() && !force_direct_prefetch) {
if (!file->Prefetch(prefetch_off, prefetch_len, ro.rate_limiter_priority)
.IsNotSupported()) {
prefetch_buffer->reset(new FilePrefetchBuffer(
diff --git a/tools/db_bench_tool.cc b/tools/db_bench_tool.cc
index ea40f5fa0..39a0ac385 100644
--- a/tools/db_bench_tool.cc
+++ b/tools/db_bench_tool.cc
@@ -4191,6 +4191,8 @@ class Benchmark {
std::shared_ptr<TableFactory>(NewCuckooTableFactory(table_options));
} else {
BlockBasedTableOptions block_based_options;
+ block_based_options.metadata_cache_options.partition_pinning =
+ PinningTier::kAll;
block_based_options.checksum =
static_cast<ChecksumType>(FLAGS_checksum_type);
if (FLAGS_use_hash_search) {
```
Create DB
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
ReadRandom
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
(a) Existing (Use TailPrefetchStats for tail size + use seperate prefetch buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 3395
rocksdb.sst.read.micros P50 : 5.655570 P95 : 9.931396 P99 : 14.845454 P100 : 585.000000 COUNT : 999905 SUM : 6590614
```
(b) This PR (Record tail size + use the same tail buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 14257
rocksdb.sst.read.micros P50 : 5.173347 P95 : 9.015017 P99 : 12.912610 P100 : 228.000000 COUNT : 998547 SUM : 5976540
```
As we can see, we increase the prefetch tail hit count and decrease SST read count with this PR
3. Test backward compatibility by stepping through reading with post-PR code on a db generated pre-PR.
Reviewed By: pdillinger
Differential Revision: D45413346
Pulled By: hx235
fbshipit-source-id: 7d5e36a60a72477218f79905168d688452a4c064
2 years ago
|
|
|
|
|
|
|
uint64_t tail_size;
|
Add support to strip / pad timestamp when creating / reading a block based table (#11495)
Summary:
Add support to strip timestamp in block based table builder and pad timestamp in block based table reader.
On the write path, use the per column family option `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` to indicate whether user-defined timestamps should be stripped for all block based tables created for the column family.
On the read path, added a per table `TableReadOption.user_defined_timestamps_persisted` to flag whether the user keys in the table contains user defined timestamps.
This patch is mostly passing the related flags down to the block building/parsing level with the exception of handling the `first_internal_key` in `IndexValue`, which is included in the `IndexBuilder` level. The value part of range deletion entries should have a similar handling, I haven't decided where to best fit this piece of logic, I will do it in a follow up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11495
Test Plan:
Existing test `BlockBasedTableReaderTest` is parameterized to run with:
1) different UDT test modes: kNone, kNormal, kStripUserDefinedTimestamp
2) all four index types, when index type is `kTwoLevelIndexSearch`, also enables partitioned filters
3) parallel vs non-parallel compression
4) enable/disable compression dictionary.
Also added tests for API `BlockBasedTableReader::NewIterator`.
`PartitionedFilterBlockTest` is parameterized to run with different UDT test modes:kNone, kNormal, kStripUserDefinedTimestamp.
```
make all check
./block_based_table_reader_test
./partitioned_filter_block_test
```
Reviewed By: ltamasi
Differential Revision: D46344577
Pulled By: jowlyzhang
fbshipit-source-id: 93ac8542b19319d1298712b8bed908c8831ba675
2 years ago
|
|
|
|
|
|
|
// Whether the key in the table contains user-defined timestamps.
|
|
|
|
bool user_defined_timestamps_persisted;
|
|
|
|
};
|
|
|
|
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
10 years ago
|
|
|
struct TableBuilderOptions {
|
|
|
|
TableBuilderOptions(
|
|
|
|
const ImmutableOptions& _ioptions, const MutableCFOptions& _moptions,
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
10 years ago
|
|
|
const InternalKeyComparator& _internal_comparator,
|
|
|
|
const IntTblPropCollectorFactories* _int_tbl_prop_collector_factories,
|
|
|
|
CompressionType _compression_type,
|
Add more LSM info to FilterBuildingContext (#8246)
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
4 years ago
|
|
|
const CompressionOptions& _compression_opts, uint32_t _column_family_id,
|
|
|
|
const std::string& _column_family_name, int _level,
|
|
|
|
bool _is_bottommost = false,
|
|
|
|
TableFileCreationReason _reason = TableFileCreationReason::kMisc,
|
|
|
|
const int64_t _oldest_key_time = 0,
|
|
|
|
const uint64_t _file_creation_time = 0, const std::string& _db_id = "",
|
|
|
|
const std::string& _db_session_id = "",
|
|
|
|
const uint64_t _target_file_size = 0, const uint64_t _cur_file_num = 0)
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
10 years ago
|
|
|
: ioptions(_ioptions),
|
|
|
|
moptions(_moptions),
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
10 years ago
|
|
|
internal_comparator(_internal_comparator),
|
|
|
|
int_tbl_prop_collector_factories(_int_tbl_prop_collector_factories),
|
|
|
|
compression_type(_compression_type),
|
|
|
|
compression_opts(_compression_opts),
|
|
|
|
column_family_id(_column_family_id),
|
|
|
|
column_family_name(_column_family_name),
|
Reduce scope of compression dictionary to single SST (#4952)
Summary:
Our previous approach was to train one compression dictionary per compaction, using the first output SST to train a dictionary, and then applying it on subsequent SSTs in the same compaction. While this was great for minimizing CPU/memory/I/O overhead, it did not achieve good compression ratios in practice. In our most promising potential use case, moderate reductions in a dictionary's scope make a major difference on compression ratio.
So, this PR changes compression dictionary to be scoped per-SST. It accepts the tradeoff during table building to use more memory and CPU. Important changes include:
- The `BlockBasedTableBuilder` has a new state when dictionary compression is in-use: `kBuffered`. In that state it accumulates uncompressed data in-memory whenever `Add` is called.
- After accumulating target file size bytes or calling `BlockBasedTableBuilder::Finish`, a `BlockBasedTableBuilder` moves to the `kUnbuffered` state. The transition (`EnterUnbuffered()`) involves sampling the buffered data, training a dictionary, and compressing/writing out all buffered data. In the `kUnbuffered` state, a `BlockBasedTableBuilder` behaves the same as before -- blocks are compressed/written out as soon as they fill up.
- Samples are now whole uncompressed data blocks, except the final sample may be a partial data block so we don't breach the user's configured `max_dict_bytes` or `zstd_max_train_bytes`. The dictionary trainer is supposed to work better when we pass it real units of compression. Previously we were passing 64-byte KV samples which was not realistic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4952
Differential Revision: D13967980
Pulled By: ajkr
fbshipit-source-id: 82bea6f7537e1529c7a1a4cdee84585f5949300f
6 years ago
|
|
|
oldest_key_time(_oldest_key_time),
|
Periodic Compactions (#5166)
Summary:
Introducing Periodic Compactions.
This feature allows all the files in a CF to be periodically compacted. It could help in catching any corruptions that could creep into the DB proactively as every file is constantly getting re-compacted. And also, of course, it helps to cleanup data older than certain threshold.
- Introduced a new option `periodic_compaction_time` to control how long a file can live without being compacted in a CF.
- This works across all levels.
- The files are put in the same level after going through the compaction. (Related files in the same level are picked up as `ExpandInputstoCleanCut` is used).
- Compaction filters, if any, are invoked as usual.
- A new table property, `file_creation_time`, is introduced to implement this feature. This property is set to the time at which the SST file was created (and that time is given by the underlying Env/OS).
This feature can be enabled on its own, or in conjunction with `ttl`. It is possible to set a different time threshold for the bottom level when used in conjunction with ttl. Since `ttl` works only on 0 to last but one levels, you could set `ttl` to, say, 1 day, and `periodic_compaction_time` to, say, 7 days. Since `ttl < periodic_compaction_time` all files in last but one levels keep getting picked up based on ttl, and almost never based on periodic_compaction_time. The files in the bottom level get picked up for compaction based on `periodic_compaction_time`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5166
Differential Revision: D14884441
Pulled By: sagar0
fbshipit-source-id: 408426cbacb409c06386a98632dcf90bfa1bda47
6 years ago
|
|
|
target_file_size(_target_file_size),
|
|
|
|
file_creation_time(_file_creation_time),
|
|
|
|
db_id(_db_id),
|
Add more LSM info to FilterBuildingContext (#8246)
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
4 years ago
|
|
|
db_session_id(_db_session_id),
|
|
|
|
level_at_creation(_level),
|
|
|
|
is_bottommost(_is_bottommost),
|
|
|
|
reason(_reason),
|
|
|
|
cur_file_num(_cur_file_num) {}
|
|
|
|
|
|
|
|
const ImmutableOptions& ioptions;
|
|
|
|
const MutableCFOptions& moptions;
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
10 years ago
|
|
|
const InternalKeyComparator& internal_comparator;
|
|
|
|
const IntTblPropCollectorFactories* int_tbl_prop_collector_factories;
|
|
|
|
const CompressionType compression_type;
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
10 years ago
|
|
|
const CompressionOptions& compression_opts;
|
|
|
|
const uint32_t column_family_id;
|
|
|
|
const std::string& column_family_name;
|
|
|
|
const int64_t oldest_key_time;
|
Reduce scope of compression dictionary to single SST (#4952)
Summary:
Our previous approach was to train one compression dictionary per compaction, using the first output SST to train a dictionary, and then applying it on subsequent SSTs in the same compaction. While this was great for minimizing CPU/memory/I/O overhead, it did not achieve good compression ratios in practice. In our most promising potential use case, moderate reductions in a dictionary's scope make a major difference on compression ratio.
So, this PR changes compression dictionary to be scoped per-SST. It accepts the tradeoff during table building to use more memory and CPU. Important changes include:
- The `BlockBasedTableBuilder` has a new state when dictionary compression is in-use: `kBuffered`. In that state it accumulates uncompressed data in-memory whenever `Add` is called.
- After accumulating target file size bytes or calling `BlockBasedTableBuilder::Finish`, a `BlockBasedTableBuilder` moves to the `kUnbuffered` state. The transition (`EnterUnbuffered()`) involves sampling the buffered data, training a dictionary, and compressing/writing out all buffered data. In the `kUnbuffered` state, a `BlockBasedTableBuilder` behaves the same as before -- blocks are compressed/written out as soon as they fill up.
- Samples are now whole uncompressed data blocks, except the final sample may be a partial data block so we don't breach the user's configured `max_dict_bytes` or `zstd_max_train_bytes`. The dictionary trainer is supposed to work better when we pass it real units of compression. Previously we were passing 64-byte KV samples which was not realistic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4952
Differential Revision: D13967980
Pulled By: ajkr
fbshipit-source-id: 82bea6f7537e1529c7a1a4cdee84585f5949300f
6 years ago
|
|
|
const uint64_t target_file_size;
|
Periodic Compactions (#5166)
Summary:
Introducing Periodic Compactions.
This feature allows all the files in a CF to be periodically compacted. It could help in catching any corruptions that could creep into the DB proactively as every file is constantly getting re-compacted. And also, of course, it helps to cleanup data older than certain threshold.
- Introduced a new option `periodic_compaction_time` to control how long a file can live without being compacted in a CF.
- This works across all levels.
- The files are put in the same level after going through the compaction. (Related files in the same level are picked up as `ExpandInputstoCleanCut` is used).
- Compaction filters, if any, are invoked as usual.
- A new table property, `file_creation_time`, is introduced to implement this feature. This property is set to the time at which the SST file was created (and that time is given by the underlying Env/OS).
This feature can be enabled on its own, or in conjunction with `ttl`. It is possible to set a different time threshold for the bottom level when used in conjunction with ttl. Since `ttl` works only on 0 to last but one levels, you could set `ttl` to, say, 1 day, and `periodic_compaction_time` to, say, 7 days. Since `ttl < periodic_compaction_time` all files in last but one levels keep getting picked up based on ttl, and almost never based on periodic_compaction_time. The files in the bottom level get picked up for compaction based on `periodic_compaction_time`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5166
Differential Revision: D14884441
Pulled By: sagar0
fbshipit-source-id: 408426cbacb409c06386a98632dcf90bfa1bda47
6 years ago
|
|
|
const uint64_t file_creation_time;
|
|
|
|
const std::string db_id;
|
|
|
|
const std::string db_session_id;
|
Add more LSM info to FilterBuildingContext (#8246)
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
4 years ago
|
|
|
// BEGIN for FilterBuildingContext
|
|
|
|
const int level_at_creation;
|
|
|
|
const bool is_bottommost;
|
|
|
|
const TableFileCreationReason reason;
|
|
|
|
// END for FilterBuildingContext
|
|
|
|
|
|
|
|
// XXX: only used by BlockBasedTableBuilder for SstFileWriter. If you
|
|
|
|
// want to skip filters, that should be (for example) null filter_policy
|
|
|
|
// in the table options of the ioptions.table_factory
|
|
|
|
bool skip_filters = false;
|
|
|
|
const uint64_t cur_file_num;
|
A new call back to TablePropertiesCollector to allow users know the entry is add, delete or merge
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
10 years ago
|
|
|
};
|
|
|
|
|
|
|
|
// TableBuilder provides the interface used to build a Table
|
|
|
|
// (an immutable and sorted map from keys to values).
|
|
|
|
//
|
|
|
|
// Multiple threads can invoke const methods on a TableBuilder without
|
|
|
|
// external synchronization, but if any of the threads may call a
|
|
|
|
// non-const method, all threads accessing the same TableBuilder must use
|
|
|
|
// external synchronization.
|
|
|
|
class TableBuilder {
|
|
|
|
public:
|
|
|
|
// REQUIRES: Either Finish() or Abandon() has been called.
|
|
|
|
virtual ~TableBuilder() {}
|
|
|
|
|
|
|
|
// Add key,value to the table being constructed.
|
|
|
|
// REQUIRES: key is after any previously added key according to comparator.
|
|
|
|
// REQUIRES: Finish(), Abandon() have not been called
|
|
|
|
virtual void Add(const Slice& key, const Slice& value) = 0;
|
|
|
|
|
|
|
|
// Return non-ok iff some error has been detected.
|
|
|
|
virtual Status status() const = 0;
|
|
|
|
|
Pass IOStatus to write path and set retryable IO Error as hard error in BG jobs (#6487)
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.
The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487
Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check
Reviewed By: anand1976
Differential Revision: D20685017
Pulled By: zhichao-cao
fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
5 years ago
|
|
|
// Return non-ok iff some error happens during IO.
|
|
|
|
virtual IOStatus io_status() const = 0;
|
|
|
|
|
|
|
|
// Finish building the table.
|
|
|
|
// REQUIRES: Finish(), Abandon() have not been called
|
|
|
|
virtual Status Finish() = 0;
|
|
|
|
|
|
|
|
// Indicate that the contents of this builder should be abandoned.
|
|
|
|
// If the caller is not going to call Finish(), it must call Abandon()
|
|
|
|
// before destroying this builder.
|
|
|
|
// REQUIRES: Finish(), Abandon() have not been called
|
|
|
|
virtual void Abandon() = 0;
|
|
|
|
|
|
|
|
// Number of calls to Add() so far.
|
|
|
|
virtual uint64_t NumEntries() const = 0;
|
|
|
|
|
|
|
|
// Whether the output file is completely empty. It has neither entries
|
|
|
|
// or tombstones.
|
|
|
|
virtual bool IsEmpty() const {
|
|
|
|
return NumEntries() == 0 && GetTableProperties().num_range_deletions == 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Size of the file generated so far. If invoked after a successful
|
|
|
|
// Finish() call, returns the size of the final generated file.
|
|
|
|
virtual uint64_t FileSize() const = 0;
|
Add more table properties to EventLogger
Summary:
Example output:
{"time_micros": 1431463794310521, "job": 353, "event": "table_file_creation", "file_number": 387, "file_size": 86937, "table_info": {"data_size": "81801", "index_size": "9751", "filter_size": "0", "raw_key_size": "23448", "raw_average_key_size": "24.000000", "raw_value_size": "990571", "raw_average_value_size": "1013.890481", "num_data_blocks": "245", "num_entries": "977", "filter_policy_name": "", "kDeletedKeys": "0"}}
Also fixed a bug where BuildTable() in recovery was passing Env::IOHigh argument into paranoid_checks_file parameter.
Test Plan: make check + check out the output in the log
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38343
10 years ago
|
|
|
|
|
|
|
// Estimated size of the file generated so far. This is used when
|
|
|
|
// FileSize() cannot estimate final SST size, e.g. parallel compression
|
|
|
|
// is enabled.
|
|
|
|
virtual uint64_t EstimatedFileSize() const { return FileSize(); }
|
|
|
|
|
Record and use the tail size to prefetch table tail (#11406)
Summary:
**Context:**
We prefetch the tail part of a SST file (i.e, the blocks after data blocks till the end of the file) during each SST file open in hope to prefetch all the stuff at once ahead of time for later read e.g, footer, meta index, filter/index etc. The existing approach to estimate the tail size to prefetch is through `TailPrefetchStats` heuristics introduced in https://github.com/facebook/rocksdb/pull/4156, which has caused small reads in unlucky case (e.g, small read into the tail buffer during table open in thread 1 under the same BlockBasedTableFactory object can make thread 2's tail prefetching use a small size that it shouldn't) and is hard to debug. Therefore we decide to record the exact tail size and use it directly to prefetch tail of the SST instead of relying heuristics.
**Summary:**
- Obtain and record in manifest the tail size in `BlockBasedTableBuilder::Finish()`
- For backward compatibility, we fall back to TailPrefetchStats and last to simple heuristics that the tail size is a linear portion of the file size - see PR conversation for more.
- Make`tail_start_offset` part of the table properties and deduct tail size to record in manifest for external files (e.g, file ingestion, import CF) and db repair (with no access to manifest).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11406
Test Plan:
1. New UT
2. db bench
Note: db bench on /tmp/ where direct read is supported is too slow to finish and the default pinning setting in db bench is not helpful to profile # sst read of Get. Therefore I hacked the following to obtain the following comparison.
```
diff --git a/table/block_based/block_based_table_reader.cc b/table/block_based/block_based_table_reader.cc
index bd5669f0f..791484c1f 100644
--- a/table/block_based/block_based_table_reader.cc
+++ b/table/block_based/block_based_table_reader.cc
@@ -838,7 +838,7 @@ Status BlockBasedTable::PrefetchTail(
&tail_prefetch_size);
// Try file system prefetch
- if (!file->use_direct_io() && !force_direct_prefetch) {
+ if (false && !file->use_direct_io() && !force_direct_prefetch) {
if (!file->Prefetch(prefetch_off, prefetch_len, ro.rate_limiter_priority)
.IsNotSupported()) {
prefetch_buffer->reset(new FilePrefetchBuffer(
diff --git a/tools/db_bench_tool.cc b/tools/db_bench_tool.cc
index ea40f5fa0..39a0ac385 100644
--- a/tools/db_bench_tool.cc
+++ b/tools/db_bench_tool.cc
@@ -4191,6 +4191,8 @@ class Benchmark {
std::shared_ptr<TableFactory>(NewCuckooTableFactory(table_options));
} else {
BlockBasedTableOptions block_based_options;
+ block_based_options.metadata_cache_options.partition_pinning =
+ PinningTier::kAll;
block_based_options.checksum =
static_cast<ChecksumType>(FLAGS_checksum_type);
if (FLAGS_use_hash_search) {
```
Create DB
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
ReadRandom
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
(a) Existing (Use TailPrefetchStats for tail size + use seperate prefetch buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 3395
rocksdb.sst.read.micros P50 : 5.655570 P95 : 9.931396 P99 : 14.845454 P100 : 585.000000 COUNT : 999905 SUM : 6590614
```
(b) This PR (Record tail size + use the same tail buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 14257
rocksdb.sst.read.micros P50 : 5.173347 P95 : 9.015017 P99 : 12.912610 P100 : 228.000000 COUNT : 998547 SUM : 5976540
```
As we can see, we increase the prefetch tail hit count and decrease SST read count with this PR
3. Test backward compatibility by stepping through reading with post-PR code on a db generated pre-PR.
Reviewed By: pdillinger
Differential Revision: D45413346
Pulled By: hx235
fbshipit-source-id: 7d5e36a60a72477218f79905168d688452a4c064
2 years ago
|
|
|
virtual uint64_t GetTailSize() const { return 0; }
|
|
|
|
|
|
|
|
// If the user defined table properties collector suggest the file to
|
|
|
|
// be further compacted.
|
|
|
|
virtual bool NeedCompact() const { return false; }
|
|
|
|
|
Add more table properties to EventLogger
Summary:
Example output:
{"time_micros": 1431463794310521, "job": 353, "event": "table_file_creation", "file_number": 387, "file_size": 86937, "table_info": {"data_size": "81801", "index_size": "9751", "filter_size": "0", "raw_key_size": "23448", "raw_average_key_size": "24.000000", "raw_value_size": "990571", "raw_average_value_size": "1013.890481", "num_data_blocks": "245", "num_entries": "977", "filter_policy_name": "", "kDeletedKeys": "0"}}
Also fixed a bug where BuildTable() in recovery was passing Env::IOHigh argument into paranoid_checks_file parameter.
Test Plan: make check + check out the output in the log
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38343
10 years ago
|
|
|
// Returns table properties
|
|
|
|
virtual TableProperties GetTableProperties() const = 0;
|
|
|
|
|
|
|
|
// Return file checksum
|
|
|
|
virtual std::string GetFileChecksum() const = 0;
|
|
|
|
|
|
|
|
// Return file checksum function name
|
|
|
|
virtual const char* GetFileChecksumFuncName() const = 0;
|
|
|
|
|
|
|
|
// Set the sequence number to time mapping
|
|
|
|
virtual void SetSeqnoTimeTableProperties(
|
|
|
|
const std::string& /*encoded_seqno_to_time_mapping*/,
|
|
|
|
uint64_t /*oldest_ancestor_time*/){};
|
|
|
|
};
|
|
|
|
|
|
|
|
} // namespace ROCKSDB_NAMESPACE
|