Fix flush not being commit while writing manifest
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
8 years ago
|
|
|
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
|
|
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
|
|
// (found in the LICENSE.Apache file in the root directory).
|
Fix flush not being commit while writing manifest
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
8 years ago
|
|
|
//
|
|
|
|
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
|
|
|
|
// Use of this source code is governed by a BSD-style license that can be
|
|
|
|
// found in the LICENSE file. See the AUTHORS file for names of contributors.
|
|
|
|
|
|
|
|
#include <atomic>
|
|
|
|
#include <limits>
|
|
|
|
|
|
|
|
#include "db/db_impl/db_impl.h"
|
Fix flush not being commit while writing manifest
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
8 years ago
|
|
|
#include "db/db_test_util.h"
|
|
|
|
#include "env/mock_env.h"
|
|
|
|
#include "file/filename.h"
|
|
|
|
#include "port/port.h"
|
Fix flush not being commit while writing manifest
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
8 years ago
|
|
|
#include "port/stack_trace.h"
|
|
|
|
#include "rocksdb/utilities/transaction_db.h"
|
|
|
|
#include "test_util/sync_point.h"
|
|
|
|
#include "test_util/testutil.h"
|
|
|
|
#include "util/cast_util.h"
|
|
|
|
#include "util/mutexlock.h"
|
|
|
|
#include "utilities/fault_injection_env.h"
|
|
|
|
#include "utilities/fault_injection_fs.h"
|
Fix flush not being commit while writing manifest
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
8 years ago
|
|
|
|
|
|
|
namespace ROCKSDB_NAMESPACE {
|
Fix flush not being commit while writing manifest
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
8 years ago
|
|
|
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
// This is a static filter used for filtering
|
|
|
|
// kvs during the compaction process.
|
|
|
|
static std::string NEW_VALUE = "NewValue";
|
|
|
|
|
Fix flush not being commit while writing manifest
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
8 years ago
|
|
|
class DBFlushTest : public DBTestBase {
|
|
|
|
public:
|
|
|
|
DBFlushTest() : DBTestBase("db_flush_test", /*env_do_fsync=*/true) {}
|
Fix flush not being commit while writing manifest
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
8 years ago
|
|
|
};
|
|
|
|
|
|
|
|
class DBFlushDirectIOTest : public DBFlushTest,
|
|
|
|
public ::testing::WithParamInterface<bool> {
|
|
|
|
public:
|
|
|
|
DBFlushDirectIOTest() : DBFlushTest() {}
|
|
|
|
};
|
|
|
|
|
|
|
|
class DBAtomicFlushTest : public DBFlushTest,
|
|
|
|
public ::testing::WithParamInterface<bool> {
|
|
|
|
public:
|
|
|
|
DBAtomicFlushTest() : DBFlushTest() {}
|
|
|
|
};
|
|
|
|
|
Fix flush not being commit while writing manifest
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
8 years ago
|
|
|
// We had issue when two background threads trying to flush at the same time,
|
|
|
|
// only one of them get committed. The test verifies the issue is fixed.
|
|
|
|
TEST_F(DBFlushTest, FlushWhileWritingManifest) {
|
|
|
|
Options options;
|
|
|
|
options.disable_auto_compactions = true;
|
|
|
|
options.max_background_flushes = 2;
|
|
|
|
options.env = env_;
|
Fix flush not being commit while writing manifest
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
8 years ago
|
|
|
Reopen(options);
|
|
|
|
FlushOptions no_wait;
|
|
|
|
no_wait.wait = false;
|
|
|
|
no_wait.allow_write_stall=true;
|
Fix flush not being commit while writing manifest
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
8 years ago
|
|
|
|
|
|
|
SyncPoint::GetInstance()->LoadDependency(
|
|
|
|
{{"VersionSet::LogAndApply:WriteManifest",
|
|
|
|
"DBFlushTest::FlushWhileWritingManifest:1"},
|
|
|
|
{"MemTableList::TryInstallMemtableFlushResults:InProgress",
|
Fix flush not being commit while writing manifest
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
8 years ago
|
|
|
"VersionSet::LogAndApply:WriteManifestDone"}});
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
ASSERT_OK(Put("foo", "v"));
|
|
|
|
ASSERT_OK(dbfull()->Flush(no_wait));
|
|
|
|
TEST_SYNC_POINT("DBFlushTest::FlushWhileWritingManifest:1");
|
|
|
|
ASSERT_OK(Put("bar", "v"));
|
|
|
|
ASSERT_OK(dbfull()->Flush(no_wait));
|
|
|
|
// If the issue is hit we will wait here forever.
|
|
|
|
ASSERT_OK(dbfull()->TEST_WaitForFlushMemTable());
|
|
|
|
#ifndef ROCKSDB_LITE
|
Fix flush not being commit while writing manifest
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
8 years ago
|
|
|
ASSERT_EQ(2, TotalTableFiles());
|
|
|
|
#endif // ROCKSDB_LITE
|
Fix flush not being commit while writing manifest
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
8 years ago
|
|
|
}
|
|
|
|
|
|
|
|
// Disable this test temporarily on Travis as it fails intermittently.
|
|
|
|
// Github issue: #4151
|
|
|
|
TEST_F(DBFlushTest, SyncFail) {
|
|
|
|
std::unique_ptr<FaultInjectionTestEnv> fault_injection_env(
|
|
|
|
new FaultInjectionTestEnv(env_));
|
|
|
|
Options options;
|
|
|
|
options.disable_auto_compactions = true;
|
|
|
|
options.env = fault_injection_env.get();
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->LoadDependency(
|
|
|
|
{{"DBFlushTest::SyncFail:1", "DBImpl::SyncClosedLogs:Start"},
|
|
|
|
{"DBImpl::SyncClosedLogs:Failed", "DBFlushTest::SyncFail:2"}});
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
CreateAndReopenWithCF({"pikachu"}, options);
|
|
|
|
ASSERT_OK(Put("key", "value"));
|
|
|
|
FlushOptions flush_options;
|
|
|
|
flush_options.wait = false;
|
|
|
|
ASSERT_OK(dbfull()->Flush(flush_options));
|
Skip deleted WALs during recovery
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
7 years ago
|
|
|
// Flush installs a new super-version. Get the ref count after that.
|
|
|
|
fault_injection_env->SetFilesystemActive(false);
|
|
|
|
TEST_SYNC_POINT("DBFlushTest::SyncFail:1");
|
|
|
|
TEST_SYNC_POINT("DBFlushTest::SyncFail:2");
|
|
|
|
fault_injection_env->SetFilesystemActive(true);
|
Skip deleted WALs during recovery
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
7 years ago
|
|
|
// Now the background job will do the flush; wait for it.
|
|
|
|
// Returns the IO error happend during flush.
|
|
|
|
ASSERT_NOK(dbfull()->TEST_WaitForFlushMemTable());
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
|
|
ASSERT_EQ("", FilesPerLevel()); // flush failed.
|
|
|
|
#endif // ROCKSDB_LITE
|
|
|
|
Destroy(options);
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, SyncSkip) {
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->LoadDependency(
|
|
|
|
{{"DBFlushTest::SyncSkip:1", "DBImpl::SyncClosedLogs:Skip"},
|
|
|
|
{"DBImpl::SyncClosedLogs:Skip", "DBFlushTest::SyncSkip:2"}});
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
Reopen(options);
|
|
|
|
ASSERT_OK(Put("key", "value"));
|
|
|
|
|
|
|
|
FlushOptions flush_options;
|
|
|
|
flush_options.wait = false;
|
|
|
|
ASSERT_OK(dbfull()->Flush(flush_options));
|
|
|
|
|
|
|
|
TEST_SYNC_POINT("DBFlushTest::SyncSkip:1");
|
|
|
|
TEST_SYNC_POINT("DBFlushTest::SyncSkip:2");
|
|
|
|
|
|
|
|
// Now the background job will do the flush; wait for it.
|
|
|
|
ASSERT_OK(dbfull()->TEST_WaitForFlushMemTable());
|
|
|
|
|
|
|
|
Destroy(options);
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, FlushInLowPriThreadPool) {
|
|
|
|
// Verify setting an empty high-pri (flush) thread pool causes flushes to be
|
|
|
|
// scheduled in the low-pri (compaction) thread pool.
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.level0_file_num_compaction_trigger = 4;
|
|
|
|
options.memtable_factory.reset(test::NewSpecialSkipListFactory(1));
|
|
|
|
Reopen(options);
|
|
|
|
env_->SetBackgroundThreads(0, Env::HIGH);
|
|
|
|
|
|
|
|
std::thread::id tid;
|
|
|
|
int num_flushes = 0, num_compactions = 0;
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"DBImpl::BGWorkFlush", [&](void* /*arg*/) {
|
|
|
|
if (tid == std::thread::id()) {
|
|
|
|
tid = std::this_thread::get_id();
|
|
|
|
} else {
|
|
|
|
ASSERT_EQ(tid, std::this_thread::get_id());
|
|
|
|
}
|
|
|
|
++num_flushes;
|
|
|
|
});
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"DBImpl::BGWorkCompaction", [&](void* /*arg*/) {
|
|
|
|
ASSERT_EQ(tid, std::this_thread::get_id());
|
|
|
|
++num_compactions;
|
|
|
|
});
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
ASSERT_OK(Put("key", "val"));
|
|
|
|
for (int i = 0; i < 4; ++i) {
|
|
|
|
ASSERT_OK(Put("key", "val"));
|
|
|
|
ASSERT_OK(dbfull()->TEST_WaitForFlushMemTable());
|
|
|
|
}
|
|
|
|
ASSERT_OK(dbfull()->TEST_WaitForCompact());
|
|
|
|
ASSERT_EQ(4, num_flushes);
|
|
|
|
ASSERT_EQ(1, num_compactions);
|
|
|
|
}
|
|
|
|
|
Fix possible hang issue in ~DBImpl() when flush is scheduled in LOW pool (#8125)
Summary:
In DBImpl::CloseHelper, we wait for bg_compaction_scheduled_
and bg_flush_scheduled_ to drop to 0. Unschedule is called prior
to cancel any unscheduled flushes/compactions. It is assumed that
anything in the high priority is a flush, and anything in the low
priority pool is a compaction. This assumption, however, is broken when
the high-pri pool is full.
As a result, bg_compaction_scheduled_ can go < 0 and bg_flush_scheduled_
will remain > 0 and DB can be in hang state.
The fix is, we decrement the `bg_{flush,compaction,bottom_compaction}_scheduled_`
inside the `Unschedule{Flush,Compaction,BottomCompaction}Callback()`s. DB
`mutex_` will make the counts atomic in `Unschedule`.
Related discussion: https://github.com/facebook/rocksdb/issues/7928
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8125
Test Plan: Added new test case which hangs without the fix.
Reviewed By: jay-zhuang
Differential Revision: D27390043
Pulled By: ajkr
fbshipit-source-id: 78a367fba9a59ac5607ad24bd1c46dc16d5ec110
4 years ago
|
|
|
// Test when flush job is submitted to low priority thread pool and when DB is
|
|
|
|
// closed in the meanwhile, CloseHelper doesn't hang.
|
|
|
|
TEST_F(DBFlushTest, CloseDBWhenFlushInLowPri) {
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.max_background_flushes = 1;
|
|
|
|
options.max_total_wal_size = 8192;
|
|
|
|
|
|
|
|
DestroyAndReopen(options);
|
|
|
|
CreateColumnFamilies({"cf1", "cf2"}, options);
|
|
|
|
|
|
|
|
env_->SetBackgroundThreads(0, Env::HIGH);
|
|
|
|
env_->SetBackgroundThreads(1, Env::LOW);
|
|
|
|
test::SleepingBackgroundTask sleeping_task_low;
|
|
|
|
int num_flushes = 0;
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->SetCallBack("DBImpl::BGWorkFlush",
|
|
|
|
[&](void* /*arg*/) { ++num_flushes; });
|
|
|
|
|
|
|
|
int num_low_flush_unscheduled = 0;
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"DBImpl::UnscheduleLowFlushCallback", [&](void* /*arg*/) {
|
|
|
|
num_low_flush_unscheduled++;
|
|
|
|
// There should be one flush job in low pool that needs to be
|
|
|
|
// unscheduled
|
|
|
|
ASSERT_EQ(num_low_flush_unscheduled, 1);
|
|
|
|
});
|
|
|
|
|
|
|
|
int num_high_flush_unscheduled = 0;
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"DBImpl::UnscheduleHighFlushCallback", [&](void* /*arg*/) {
|
|
|
|
num_high_flush_unscheduled++;
|
|
|
|
// There should be no flush job in high pool
|
|
|
|
ASSERT_EQ(num_high_flush_unscheduled, 0);
|
|
|
|
});
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
ASSERT_OK(Put(0, "key1", DummyString(8192)));
|
|
|
|
// Block thread so that flush cannot be run and can be removed from the queue
|
|
|
|
// when called Unschedule.
|
|
|
|
env_->Schedule(&test::SleepingBackgroundTask::DoSleepTask, &sleeping_task_low,
|
|
|
|
Env::Priority::LOW);
|
|
|
|
sleeping_task_low.WaitUntilSleeping();
|
|
|
|
|
|
|
|
// Trigger flush and flush job will be scheduled to LOW priority thread.
|
|
|
|
ASSERT_OK(Put(0, "key2", DummyString(8192)));
|
|
|
|
|
|
|
|
// Close DB and flush job in low priority queue will be removed without
|
|
|
|
// running.
|
|
|
|
Close();
|
|
|
|
sleeping_task_low.WakeUp();
|
|
|
|
sleeping_task_low.WaitUntilDone();
|
|
|
|
ASSERT_EQ(0, num_flushes);
|
|
|
|
|
|
|
|
TryReopenWithColumnFamilies({"default", "cf1", "cf2"}, options);
|
|
|
|
ASSERT_OK(Put(0, "key3", DummyString(8192)));
|
|
|
|
ASSERT_OK(Flush(0));
|
|
|
|
ASSERT_EQ(1, num_flushes);
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, ManualFlushWithMinWriteBufferNumberToMerge) {
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.write_buffer_size = 100;
|
|
|
|
options.max_write_buffer_number = 4;
|
|
|
|
options.min_write_buffer_number_to_merge = 3;
|
|
|
|
Reopen(options);
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->LoadDependency(
|
|
|
|
{{"DBImpl::BGWorkFlush",
|
|
|
|
"DBFlushTest::ManualFlushWithMinWriteBufferNumberToMerge:1"},
|
|
|
|
{"DBFlushTest::ManualFlushWithMinWriteBufferNumberToMerge:2",
|
|
|
|
"FlushJob::WriteLevel0Table"}});
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
ASSERT_OK(Put("key1", "value1"));
|
|
|
|
|
|
|
|
port::Thread t([&]() {
|
|
|
|
// The call wait for flush to finish, i.e. with flush_options.wait = true.
|
|
|
|
ASSERT_OK(Flush());
|
|
|
|
});
|
|
|
|
|
|
|
|
// Wait for flush start.
|
|
|
|
TEST_SYNC_POINT("DBFlushTest::ManualFlushWithMinWriteBufferNumberToMerge:1");
|
|
|
|
// Insert a second memtable before the manual flush finish.
|
|
|
|
// At the end of the manual flush job, it will check if further flush
|
|
|
|
// is needed, but it will not trigger flush of the second memtable because
|
|
|
|
// min_write_buffer_number_to_merge is not reached.
|
|
|
|
ASSERT_OK(Put("key2", "value2"));
|
|
|
|
ASSERT_OK(dbfull()->TEST_SwitchMemtable());
|
|
|
|
TEST_SYNC_POINT("DBFlushTest::ManualFlushWithMinWriteBufferNumberToMerge:2");
|
|
|
|
|
|
|
|
// Manual flush should return, without waiting for flush indefinitely.
|
|
|
|
t.join();
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, ScheduleOnlyOneBgThread) {
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
Reopen(options);
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
|
|
int called = 0;
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"DBImpl::MaybeScheduleFlushOrCompaction:AfterSchedule:0", [&](void* arg) {
|
|
|
|
ASSERT_NE(nullptr, arg);
|
|
|
|
auto unscheduled_flushes = *reinterpret_cast<int*>(arg);
|
|
|
|
ASSERT_EQ(0, unscheduled_flushes);
|
|
|
|
++called;
|
|
|
|
});
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
ASSERT_OK(Put("a", "foo"));
|
|
|
|
FlushOptions flush_opts;
|
|
|
|
ASSERT_OK(dbfull()->Flush(flush_opts));
|
|
|
|
ASSERT_EQ(1, called);
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
|
|
}
|
|
|
|
|
|
|
|
// The following 3 tests are designed for testing garbage statistics at flush
|
|
|
|
// time.
|
|
|
|
//
|
|
|
|
// ======= General Information ======= (from GitHub Wiki).
|
|
|
|
// There are three scenarios where memtable flush can be triggered:
|
|
|
|
//
|
|
|
|
// 1 - Memtable size exceeds ColumnFamilyOptions::write_buffer_size
|
|
|
|
// after a write.
|
|
|
|
// 2 - Total memtable size across all column families exceeds
|
|
|
|
// DBOptions::db_write_buffer_size,
|
|
|
|
// or DBOptions::write_buffer_manager signals a flush. In this scenario
|
|
|
|
// the largest memtable will be flushed.
|
|
|
|
// 3 - Total WAL file size exceeds DBOptions::max_total_wal_size.
|
|
|
|
// In this scenario the memtable with the oldest data will be flushed,
|
|
|
|
// in order to allow the WAL file with data from this memtable to be
|
|
|
|
// purged.
|
|
|
|
//
|
|
|
|
// As a result, a memtable can be flushed before it is full. This is one
|
|
|
|
// reason the generated SST file can be smaller than the corresponding
|
|
|
|
// memtable. Compression is another factor to make SST file smaller than
|
|
|
|
// corresponding memtable, since data in memtable is uncompressed.
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, StatisticsGarbageBasic) {
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
|
|
|
|
// The following options are used to enforce several values that
|
|
|
|
// may already exist as default values to make this test resilient
|
|
|
|
// to default value updates in the future.
|
|
|
|
options.statistics = CreateDBStatistics();
|
|
|
|
|
|
|
|
// Record all statistics.
|
|
|
|
options.statistics->set_stats_level(StatsLevel::kAll);
|
|
|
|
|
|
|
|
// create the DB if it's not already present
|
|
|
|
options.create_if_missing = true;
|
|
|
|
|
|
|
|
// Useful for now as we are trying to compare uncompressed data savings on
|
|
|
|
// flush().
|
|
|
|
options.compression = kNoCompression;
|
|
|
|
|
|
|
|
// Prevent memtable in place updates. Should already be disabled
|
|
|
|
// (from Wiki:
|
|
|
|
// In place updates can be enabled by toggling on the bool
|
|
|
|
// inplace_update_support flag. However, this flag is by default set to
|
|
|
|
// false
|
|
|
|
// because this thread-safe in-place update support is not compatible
|
|
|
|
// with concurrent memtable writes. Note that the bool
|
|
|
|
// allow_concurrent_memtable_write is set to true by default )
|
|
|
|
options.inplace_update_support = false;
|
|
|
|
options.allow_concurrent_memtable_write = true;
|
|
|
|
|
|
|
|
// Enforce size of a single MemTable to 64MB (64MB = 67108864 bytes).
|
|
|
|
options.write_buffer_size = 64 << 20;
|
|
|
|
|
|
|
|
ASSERT_OK(TryReopen(options));
|
|
|
|
|
|
|
|
// Put multiple times the same key-values.
|
|
|
|
// The encoded length of a db entry in the memtable is
|
|
|
|
// defined in db/memtable.cc (MemTable::Add) as the variable:
|
|
|
|
// encoded_len= VarintLength(internal_key_size) --> =
|
|
|
|
// log_256(internal_key).
|
|
|
|
// Min # of bytes
|
|
|
|
// necessary to
|
|
|
|
// store
|
|
|
|
// internal_key_size.
|
|
|
|
// + internal_key_size --> = actual key string,
|
|
|
|
// (size key_size: w/o term null char)
|
|
|
|
// + 8 bytes for
|
|
|
|
// fixed uint64 "seq
|
|
|
|
// number
|
|
|
|
// +
|
|
|
|
// insertion type"
|
|
|
|
// + VarintLength(val_size) --> = min # of bytes to
|
|
|
|
// store val_size
|
|
|
|
// + val_size --> = actual value
|
|
|
|
// string
|
|
|
|
// For example, in our situation, "key1" : size 4, "value1" : size 6
|
|
|
|
// (the terminating null characters are not copied over to the memtable).
|
|
|
|
// And therefore encoded_len = 1 + (4+8) + 1 + 6 = 20 bytes per entry.
|
|
|
|
// However in terms of raw data contained in the memtable, and written
|
|
|
|
// over to the SSTable, we only count internal_key_size and val_size,
|
|
|
|
// because this is the only raw chunk of bytes that contains everything
|
|
|
|
// necessary to reconstruct a user entry: sequence number, insertion type,
|
|
|
|
// key, and value.
|
|
|
|
|
|
|
|
// To test the relevance of our Memtable garbage statistics,
|
|
|
|
// namely MEMTABLE_PAYLOAD_BYTES_AT_FLUSH and MEMTABLE_GARBAGE_BYTES_AT_FLUSH,
|
|
|
|
// we insert K-V pairs with 3 distinct keys (of length 4),
|
|
|
|
// and random values of arbitrary length RAND_VALUES_LENGTH,
|
|
|
|
// and we repeat this step NUM_REPEAT times total.
|
|
|
|
// At the end, we insert 3 final K-V pairs with the same 3 keys
|
|
|
|
// and known values (these will be the final values, of length 6).
|
|
|
|
// I chose NUM_REPEAT=2,000 such that no automatic flush is
|
|
|
|
// triggered (the number of bytes in the memtable is therefore
|
|
|
|
// well below any meaningful heuristic for a memtable of size 64MB).
|
|
|
|
// As a result, since each K-V pair is inserted as a payload
|
|
|
|
// of N meaningful bytes (sequence number, insertion type,
|
|
|
|
// key, and value = 8 + 4 + RAND_VALUE_LENGTH),
|
|
|
|
// MEMTABLE_GARBAGE_BYTES_AT_FLUSH should be equal to 2,000 * N bytes
|
|
|
|
// and MEMTABLE_PAYLAOD_BYTES_AT_FLUSH = MEMTABLE_GARBAGE_BYTES_AT_FLUSH +
|
|
|
|
// (3*(8 + 4 + 6)) bytes. For RAND_VALUE_LENGTH = 172 (arbitrary value), we
|
|
|
|
// expect:
|
|
|
|
// N = 8 + 4 + 172 = 184 bytes
|
|
|
|
// MEMTABLE_GARBAGE_BYTES_AT_FLUSH = 2,000 * 184 = 368,000 bytes.
|
|
|
|
// MEMTABLE_PAYLOAD_BYTES_AT_FLUSH = 368,000 + 3*18 = 368,054 bytes.
|
|
|
|
|
|
|
|
const size_t NUM_REPEAT = 2000;
|
|
|
|
const size_t RAND_VALUES_LENGTH = 172;
|
|
|
|
const std::string KEY1 = "key1";
|
|
|
|
const std::string KEY2 = "key2";
|
|
|
|
const std::string KEY3 = "key3";
|
|
|
|
const std::string VALUE1 = "value1";
|
|
|
|
const std::string VALUE2 = "value2";
|
|
|
|
const std::string VALUE3 = "value3";
|
|
|
|
uint64_t EXPECTED_MEMTABLE_PAYLOAD_BYTES_AT_FLUSH = 0;
|
|
|
|
uint64_t EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH = 0;
|
|
|
|
|
|
|
|
Random rnd(301);
|
|
|
|
// Insertion of of K-V pairs, multiple times.
|
|
|
|
for (size_t i = 0; i < NUM_REPEAT; i++) {
|
|
|
|
// Create value strings of arbitrary length RAND_VALUES_LENGTH bytes.
|
|
|
|
std::string p_v1 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
std::string p_v2 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
std::string p_v3 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
ASSERT_OK(Put(KEY1, p_v1));
|
|
|
|
ASSERT_OK(Put(KEY2, p_v2));
|
|
|
|
ASSERT_OK(Put(KEY3, p_v3));
|
|
|
|
EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH +=
|
|
|
|
KEY1.size() + p_v1.size() + sizeof(uint64_t);
|
|
|
|
EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH +=
|
|
|
|
KEY2.size() + p_v2.size() + sizeof(uint64_t);
|
|
|
|
EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH +=
|
|
|
|
KEY3.size() + p_v3.size() + sizeof(uint64_t);
|
|
|
|
}
|
|
|
|
|
|
|
|
// The memtable data bytes includes the "garbage"
|
|
|
|
// bytes along with the useful payload.
|
|
|
|
EXPECTED_MEMTABLE_PAYLOAD_BYTES_AT_FLUSH =
|
|
|
|
EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH;
|
|
|
|
|
|
|
|
ASSERT_OK(Put(KEY1, VALUE1));
|
|
|
|
ASSERT_OK(Put(KEY2, VALUE2));
|
|
|
|
ASSERT_OK(Put(KEY3, VALUE3));
|
|
|
|
|
|
|
|
// Add useful payload to the memtable data bytes:
|
|
|
|
EXPECTED_MEMTABLE_PAYLOAD_BYTES_AT_FLUSH +=
|
|
|
|
KEY1.size() + VALUE1.size() + KEY2.size() + VALUE2.size() + KEY3.size() +
|
|
|
|
VALUE3.size() + 3 * sizeof(uint64_t);
|
|
|
|
|
|
|
|
// We assert that the last K-V pairs have been successfully inserted,
|
|
|
|
// and that the valid values are VALUE1, VALUE2, VALUE3.
|
|
|
|
PinnableSlice value;
|
|
|
|
ASSERT_OK(Get(KEY1, &value));
|
|
|
|
ASSERT_EQ(value.ToString(), VALUE1);
|
|
|
|
ASSERT_OK(Get(KEY2, &value));
|
|
|
|
ASSERT_EQ(value.ToString(), VALUE2);
|
|
|
|
ASSERT_OK(Get(KEY3, &value));
|
|
|
|
ASSERT_EQ(value.ToString(), VALUE3);
|
|
|
|
|
|
|
|
// Force flush to SST. Increments the statistics counter.
|
|
|
|
ASSERT_OK(Flush());
|
|
|
|
|
|
|
|
// Collect statistics.
|
|
|
|
uint64_t mem_data_bytes =
|
|
|
|
TestGetTickerCount(options, MEMTABLE_PAYLOAD_BYTES_AT_FLUSH);
|
|
|
|
uint64_t mem_garbage_bytes =
|
|
|
|
TestGetTickerCount(options, MEMTABLE_GARBAGE_BYTES_AT_FLUSH);
|
|
|
|
|
|
|
|
EXPECT_EQ(mem_data_bytes, EXPECTED_MEMTABLE_PAYLOAD_BYTES_AT_FLUSH);
|
|
|
|
EXPECT_EQ(mem_garbage_bytes, EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH);
|
|
|
|
|
|
|
|
Close();
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, StatisticsGarbageInsertAndDeletes) {
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.statistics = CreateDBStatistics();
|
|
|
|
options.statistics->set_stats_level(StatsLevel::kAll);
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.compression = kNoCompression;
|
|
|
|
options.inplace_update_support = false;
|
|
|
|
options.allow_concurrent_memtable_write = true;
|
|
|
|
options.write_buffer_size = 67108864;
|
|
|
|
|
|
|
|
ASSERT_OK(TryReopen(options));
|
|
|
|
|
|
|
|
const size_t NUM_REPEAT = 2000;
|
|
|
|
const size_t RAND_VALUES_LENGTH = 37;
|
|
|
|
const std::string KEY1 = "key1";
|
|
|
|
const std::string KEY2 = "key2";
|
|
|
|
const std::string KEY3 = "key3";
|
|
|
|
const std::string KEY4 = "key4";
|
|
|
|
const std::string KEY5 = "key5";
|
|
|
|
const std::string KEY6 = "key6";
|
|
|
|
|
|
|
|
uint64_t EXPECTED_MEMTABLE_PAYLOAD_BYTES_AT_FLUSH = 0;
|
|
|
|
uint64_t EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH = 0;
|
|
|
|
|
|
|
|
WriteBatch batch;
|
|
|
|
|
|
|
|
Random rnd(301);
|
|
|
|
// Insertion of of K-V pairs, multiple times.
|
|
|
|
for (size_t i = 0; i < NUM_REPEAT; i++) {
|
|
|
|
// Create value strings of arbitrary length RAND_VALUES_LENGTH bytes.
|
|
|
|
std::string p_v1 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
std::string p_v2 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
std::string p_v3 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
ASSERT_OK(Put(KEY1, p_v1));
|
|
|
|
ASSERT_OK(Put(KEY2, p_v2));
|
|
|
|
ASSERT_OK(Put(KEY3, p_v3));
|
|
|
|
EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH +=
|
|
|
|
KEY1.size() + p_v1.size() + sizeof(uint64_t);
|
|
|
|
EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH +=
|
|
|
|
KEY2.size() + p_v2.size() + sizeof(uint64_t);
|
|
|
|
EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH +=
|
|
|
|
KEY3.size() + p_v3.size() + sizeof(uint64_t);
|
|
|
|
ASSERT_OK(Delete(KEY1));
|
|
|
|
ASSERT_OK(Delete(KEY2));
|
|
|
|
ASSERT_OK(Delete(KEY3));
|
|
|
|
EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH +=
|
|
|
|
KEY1.size() + KEY2.size() + KEY3.size() + 3 * sizeof(uint64_t);
|
|
|
|
}
|
|
|
|
|
|
|
|
// The memtable data bytes includes the "garbage"
|
|
|
|
// bytes along with the useful payload.
|
|
|
|
EXPECTED_MEMTABLE_PAYLOAD_BYTES_AT_FLUSH =
|
|
|
|
EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH;
|
|
|
|
|
|
|
|
// Note : one set of delete for KEY1, KEY2, KEY3 is written to
|
|
|
|
// SSTable to propagate the delete operations to K-V pairs
|
|
|
|
// that could have been inserted into the database during past Flush
|
|
|
|
// opeartions.
|
|
|
|
EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH -=
|
|
|
|
KEY1.size() + KEY2.size() + KEY3.size() + 3 * sizeof(uint64_t);
|
|
|
|
|
|
|
|
// Additional useful paylaod.
|
|
|
|
ASSERT_OK(Delete(KEY4));
|
|
|
|
ASSERT_OK(Delete(KEY5));
|
|
|
|
ASSERT_OK(Delete(KEY6));
|
|
|
|
|
|
|
|
// // Add useful payload to the memtable data bytes:
|
|
|
|
EXPECTED_MEMTABLE_PAYLOAD_BYTES_AT_FLUSH +=
|
|
|
|
KEY4.size() + KEY5.size() + KEY6.size() + 3 * sizeof(uint64_t);
|
|
|
|
|
|
|
|
// We assert that the K-V pairs have been successfully deleted.
|
|
|
|
PinnableSlice value;
|
|
|
|
ASSERT_NOK(Get(KEY1, &value));
|
|
|
|
ASSERT_NOK(Get(KEY2, &value));
|
|
|
|
ASSERT_NOK(Get(KEY3, &value));
|
|
|
|
|
|
|
|
// Force flush to SST. Increments the statistics counter.
|
|
|
|
ASSERT_OK(Flush());
|
|
|
|
|
|
|
|
// Collect statistics.
|
|
|
|
uint64_t mem_data_bytes =
|
|
|
|
TestGetTickerCount(options, MEMTABLE_PAYLOAD_BYTES_AT_FLUSH);
|
|
|
|
uint64_t mem_garbage_bytes =
|
|
|
|
TestGetTickerCount(options, MEMTABLE_GARBAGE_BYTES_AT_FLUSH);
|
|
|
|
|
|
|
|
EXPECT_EQ(mem_data_bytes, EXPECTED_MEMTABLE_PAYLOAD_BYTES_AT_FLUSH);
|
|
|
|
EXPECT_EQ(mem_garbage_bytes, EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH);
|
|
|
|
|
|
|
|
Close();
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, StatisticsGarbageRangeDeletes) {
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.statistics = CreateDBStatistics();
|
|
|
|
options.statistics->set_stats_level(StatsLevel::kAll);
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.compression = kNoCompression;
|
|
|
|
options.inplace_update_support = false;
|
|
|
|
options.allow_concurrent_memtable_write = true;
|
|
|
|
options.write_buffer_size = 67108864;
|
|
|
|
|
|
|
|
ASSERT_OK(TryReopen(options));
|
|
|
|
|
|
|
|
const size_t NUM_REPEAT = 1000;
|
|
|
|
const size_t RAND_VALUES_LENGTH = 42;
|
|
|
|
const std::string KEY1 = "key1";
|
|
|
|
const std::string KEY2 = "key2";
|
|
|
|
const std::string KEY3 = "key3";
|
|
|
|
const std::string KEY4 = "key4";
|
|
|
|
const std::string KEY5 = "key5";
|
|
|
|
const std::string KEY6 = "key6";
|
|
|
|
const std::string VALUE3 = "value3";
|
|
|
|
|
|
|
|
uint64_t EXPECTED_MEMTABLE_PAYLOAD_BYTES_AT_FLUSH = 0;
|
|
|
|
uint64_t EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH = 0;
|
|
|
|
|
|
|
|
Random rnd(301);
|
|
|
|
// Insertion of of K-V pairs, multiple times.
|
|
|
|
// Also insert DeleteRange
|
|
|
|
for (size_t i = 0; i < NUM_REPEAT; i++) {
|
|
|
|
// Create value strings of arbitrary length RAND_VALUES_LENGTH bytes.
|
|
|
|
std::string p_v1 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
std::string p_v2 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
std::string p_v3 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
ASSERT_OK(Put(KEY1, p_v1));
|
|
|
|
ASSERT_OK(Put(KEY2, p_v2));
|
|
|
|
ASSERT_OK(Put(KEY3, p_v3));
|
|
|
|
EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH +=
|
|
|
|
KEY1.size() + p_v1.size() + sizeof(uint64_t);
|
|
|
|
EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH +=
|
|
|
|
KEY2.size() + p_v2.size() + sizeof(uint64_t);
|
|
|
|
EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH +=
|
|
|
|
KEY3.size() + p_v3.size() + sizeof(uint64_t);
|
|
|
|
ASSERT_OK(db_->DeleteRange(WriteOptions(), db_->DefaultColumnFamily(), KEY1,
|
|
|
|
KEY2));
|
|
|
|
// Note: DeleteRange have an exclusive upper bound, e.g. here: [KEY2,KEY3)
|
|
|
|
// is deleted.
|
|
|
|
ASSERT_OK(db_->DeleteRange(WriteOptions(), db_->DefaultColumnFamily(), KEY2,
|
|
|
|
KEY3));
|
|
|
|
// Delete ranges are stored as a regular K-V pair, with key=STARTKEY,
|
|
|
|
// value=ENDKEY.
|
|
|
|
EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH +=
|
|
|
|
(KEY1.size() + KEY2.size() + sizeof(uint64_t)) +
|
|
|
|
(KEY2.size() + KEY3.size() + sizeof(uint64_t));
|
|
|
|
}
|
|
|
|
|
|
|
|
// The memtable data bytes includes the "garbage"
|
|
|
|
// bytes along with the useful payload.
|
|
|
|
EXPECTED_MEMTABLE_PAYLOAD_BYTES_AT_FLUSH =
|
|
|
|
EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH;
|
|
|
|
|
|
|
|
// Note : one set of deleteRange for (KEY1, KEY2) and (KEY2, KEY3) is written
|
|
|
|
// to SSTable to propagate the deleteRange operations to K-V pairs that could
|
|
|
|
// have been inserted into the database during past Flush opeartions.
|
|
|
|
EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH -=
|
|
|
|
(KEY1.size() + KEY2.size() + sizeof(uint64_t)) +
|
|
|
|
(KEY2.size() + KEY3.size() + sizeof(uint64_t));
|
|
|
|
|
|
|
|
// Overwrite KEY3 with known value (VALUE3)
|
|
|
|
// Note that during the whole time KEY3 has never been deleted
|
|
|
|
// by the RangeDeletes.
|
|
|
|
ASSERT_OK(Put(KEY3, VALUE3));
|
|
|
|
EXPECTED_MEMTABLE_PAYLOAD_BYTES_AT_FLUSH +=
|
|
|
|
KEY3.size() + VALUE3.size() + sizeof(uint64_t);
|
|
|
|
|
|
|
|
// Additional useful paylaod.
|
|
|
|
ASSERT_OK(
|
|
|
|
db_->DeleteRange(WriteOptions(), db_->DefaultColumnFamily(), KEY4, KEY5));
|
|
|
|
ASSERT_OK(
|
|
|
|
db_->DeleteRange(WriteOptions(), db_->DefaultColumnFamily(), KEY5, KEY6));
|
|
|
|
|
|
|
|
// Add useful payload to the memtable data bytes:
|
|
|
|
EXPECTED_MEMTABLE_PAYLOAD_BYTES_AT_FLUSH +=
|
|
|
|
(KEY4.size() + KEY5.size() + sizeof(uint64_t)) +
|
|
|
|
(KEY5.size() + KEY6.size() + sizeof(uint64_t));
|
|
|
|
|
|
|
|
// We assert that the K-V pairs have been successfully deleted.
|
|
|
|
PinnableSlice value;
|
|
|
|
ASSERT_NOK(Get(KEY1, &value));
|
|
|
|
ASSERT_NOK(Get(KEY2, &value));
|
|
|
|
// And that KEY3's value is correct.
|
|
|
|
ASSERT_OK(Get(KEY3, &value));
|
|
|
|
ASSERT_EQ(value, VALUE3);
|
|
|
|
|
|
|
|
// Force flush to SST. Increments the statistics counter.
|
|
|
|
ASSERT_OK(Flush());
|
|
|
|
|
|
|
|
// Collect statistics.
|
|
|
|
uint64_t mem_data_bytes =
|
|
|
|
TestGetTickerCount(options, MEMTABLE_PAYLOAD_BYTES_AT_FLUSH);
|
|
|
|
uint64_t mem_garbage_bytes =
|
|
|
|
TestGetTickerCount(options, MEMTABLE_GARBAGE_BYTES_AT_FLUSH);
|
|
|
|
|
|
|
|
EXPECT_EQ(mem_data_bytes, EXPECTED_MEMTABLE_PAYLOAD_BYTES_AT_FLUSH);
|
|
|
|
EXPECT_EQ(mem_garbage_bytes, EXPECTED_MEMTABLE_GARBAGE_BYTES_AT_FLUSH);
|
|
|
|
|
|
|
|
Close();
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
|
|
// This simple Listener can only handle one flush at a time.
|
|
|
|
class TestFlushListener : public EventListener {
|
|
|
|
public:
|
|
|
|
TestFlushListener(Env* env, DBFlushTest* test)
|
|
|
|
: slowdown_count(0), stop_count(0), db_closed(), env_(env), test_(test) {
|
|
|
|
db_closed = false;
|
|
|
|
}
|
|
|
|
|
|
|
|
~TestFlushListener() override {
|
|
|
|
prev_fc_info_.status.PermitUncheckedError(); // Ignore the status
|
|
|
|
}
|
|
|
|
void OnTableFileCreated(const TableFileCreationInfo& info) override {
|
|
|
|
// remember the info for later checking the FlushJobInfo.
|
|
|
|
prev_fc_info_ = info;
|
|
|
|
ASSERT_GT(info.db_name.size(), 0U);
|
|
|
|
ASSERT_GT(info.cf_name.size(), 0U);
|
|
|
|
ASSERT_GT(info.file_path.size(), 0U);
|
|
|
|
ASSERT_GT(info.job_id, 0);
|
|
|
|
ASSERT_GT(info.table_properties.data_size, 0U);
|
|
|
|
ASSERT_GT(info.table_properties.raw_key_size, 0U);
|
|
|
|
ASSERT_GT(info.table_properties.raw_value_size, 0U);
|
|
|
|
ASSERT_GT(info.table_properties.num_data_blocks, 0U);
|
|
|
|
ASSERT_GT(info.table_properties.num_entries, 0U);
|
|
|
|
ASSERT_EQ(info.file_checksum, kUnknownFileChecksum);
|
|
|
|
ASSERT_EQ(info.file_checksum_func_name, kUnknownFileChecksumFuncName);
|
|
|
|
}
|
|
|
|
|
|
|
|
void OnFlushCompleted(DB* db, const FlushJobInfo& info) override {
|
|
|
|
flushed_dbs_.push_back(db);
|
|
|
|
flushed_column_family_names_.push_back(info.cf_name);
|
|
|
|
if (info.triggered_writes_slowdown) {
|
|
|
|
slowdown_count++;
|
|
|
|
}
|
|
|
|
if (info.triggered_writes_stop) {
|
|
|
|
stop_count++;
|
|
|
|
}
|
|
|
|
// verify whether the previously created file matches the flushed file.
|
|
|
|
ASSERT_EQ(prev_fc_info_.db_name, db->GetName());
|
|
|
|
ASSERT_EQ(prev_fc_info_.cf_name, info.cf_name);
|
|
|
|
ASSERT_EQ(prev_fc_info_.job_id, info.job_id);
|
|
|
|
ASSERT_EQ(prev_fc_info_.file_path, info.file_path);
|
|
|
|
ASSERT_EQ(TableFileNameToNumber(info.file_path), info.file_number);
|
|
|
|
|
|
|
|
// Note: the following chunk relies on the notification pertaining to the
|
|
|
|
// database pointed to by DBTestBase::db_, and is thus bypassed when
|
|
|
|
// that assumption does not hold (see the test case MultiDBMultiListeners
|
|
|
|
// below).
|
|
|
|
ASSERT_TRUE(test_);
|
|
|
|
if (db == test_->db_) {
|
|
|
|
std::vector<std::vector<FileMetaData>> files_by_level;
|
|
|
|
test_->dbfull()->TEST_GetFilesMetaData(db->DefaultColumnFamily(),
|
|
|
|
&files_by_level);
|
|
|
|
|
|
|
|
ASSERT_FALSE(files_by_level.empty());
|
|
|
|
auto it = std::find_if(files_by_level[0].begin(), files_by_level[0].end(),
|
|
|
|
[&](const FileMetaData& meta) {
|
|
|
|
return meta.fd.GetNumber() == info.file_number;
|
|
|
|
});
|
|
|
|
ASSERT_NE(it, files_by_level[0].end());
|
|
|
|
ASSERT_EQ(info.oldest_blob_file_number, it->oldest_blob_file_number);
|
|
|
|
}
|
|
|
|
|
|
|
|
ASSERT_EQ(db->GetEnv()->GetThreadID(), info.thread_id);
|
|
|
|
ASSERT_GT(info.thread_id, 0U);
|
|
|
|
}
|
|
|
|
|
|
|
|
std::vector<std::string> flushed_column_family_names_;
|
|
|
|
std::vector<DB*> flushed_dbs_;
|
|
|
|
int slowdown_count;
|
|
|
|
int stop_count;
|
|
|
|
bool db_closing;
|
|
|
|
std::atomic_bool db_closed;
|
|
|
|
TableFileCreationInfo prev_fc_info_;
|
|
|
|
|
|
|
|
protected:
|
|
|
|
Env* env_;
|
|
|
|
DBFlushTest* test_;
|
|
|
|
};
|
|
|
|
#endif // !ROCKSDB_LITE
|
|
|
|
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
TEST_F(DBFlushTest, MemPurgeBasic) {
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
|
|
|
|
// The following options are used to enforce several values that
|
|
|
|
// may already exist as default values to make this test resilient
|
|
|
|
// to default value updates in the future.
|
|
|
|
options.statistics = CreateDBStatistics();
|
|
|
|
|
|
|
|
// Record all statistics.
|
|
|
|
options.statistics->set_stats_level(StatsLevel::kAll);
|
|
|
|
|
|
|
|
// create the DB if it's not already present
|
|
|
|
options.create_if_missing = true;
|
|
|
|
|
|
|
|
// Useful for now as we are trying to compare uncompressed data savings on
|
|
|
|
// flush().
|
|
|
|
options.compression = kNoCompression;
|
|
|
|
|
|
|
|
// Prevent memtable in place updates. Should already be disabled
|
|
|
|
// (from Wiki:
|
|
|
|
// In place updates can be enabled by toggling on the bool
|
|
|
|
// inplace_update_support flag. However, this flag is by default set to
|
|
|
|
// false
|
|
|
|
// because this thread-safe in-place update support is not compatible
|
|
|
|
// with concurrent memtable writes. Note that the bool
|
|
|
|
// allow_concurrent_memtable_write is set to true by default )
|
|
|
|
options.inplace_update_support = false;
|
|
|
|
options.allow_concurrent_memtable_write = true;
|
|
|
|
|
|
|
|
// Enforce size of a single MemTable to 64MB (64MB = 67108864 bytes).
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
options.write_buffer_size = 1 << 20;
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
// Activate the MemPurge prototype.
|
|
|
|
options.experimental_mempurge_threshold = 1.0;
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
|
|
TestFlushListener* listener = new TestFlushListener(options.env, this);
|
|
|
|
options.listeners.emplace_back(listener);
|
|
|
|
#endif // !ROCKSDB_LITE
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
ASSERT_OK(TryReopen(options));
|
|
|
|
std::atomic<uint32_t> mempurge_count{0};
|
|
|
|
std::atomic<uint32_t> sst_count{0};
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->SetCallBack(
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
"DBImpl::FlushJob:MemPurgeSuccessful",
|
|
|
|
[&](void* /*arg*/) { mempurge_count++; });
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->SetCallBack(
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
"DBImpl::FlushJob:SSTFileCreated", [&](void* /*arg*/) { sst_count++; });
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
std::string KEY1 = "IamKey1";
|
|
|
|
std::string KEY2 = "IamKey2";
|
|
|
|
std::string KEY3 = "IamKey3";
|
|
|
|
std::string KEY4 = "IamKey4";
|
|
|
|
std::string KEY5 = "IamKey5";
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
std::string KEY6 = "IamKey6";
|
|
|
|
std::string KEY7 = "IamKey7";
|
|
|
|
std::string KEY8 = "IamKey8";
|
|
|
|
std::string KEY9 = "IamKey9";
|
|
|
|
std::string RNDKEY1, RNDKEY2, RNDKEY3;
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
const std::string NOT_FOUND = "NOT_FOUND";
|
|
|
|
|
|
|
|
// Heavy overwrite workload,
|
|
|
|
// more than would fit in maximum allowed memtables.
|
|
|
|
Random rnd(719);
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
const size_t NUM_REPEAT = 100;
|
|
|
|
const size_t RAND_KEYS_LENGTH = 57;
|
|
|
|
const size_t RAND_VALUES_LENGTH = 10240;
|
|
|
|
std::string p_v1, p_v2, p_v3, p_v4, p_v5, p_v6, p_v7, p_v8, p_v9, p_rv1,
|
|
|
|
p_rv2, p_rv3;
|
|
|
|
|
|
|
|
// Insert a very first set of keys that will be
|
|
|
|
// mempurged at least once.
|
|
|
|
p_v1 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v2 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v3 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v4 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
ASSERT_OK(Put(KEY1, p_v1));
|
|
|
|
ASSERT_OK(Put(KEY2, p_v2));
|
|
|
|
ASSERT_OK(Put(KEY3, p_v3));
|
|
|
|
ASSERT_OK(Put(KEY4, p_v4));
|
|
|
|
ASSERT_EQ(Get(KEY1), p_v1);
|
|
|
|
ASSERT_EQ(Get(KEY2), p_v2);
|
|
|
|
ASSERT_EQ(Get(KEY3), p_v3);
|
|
|
|
ASSERT_EQ(Get(KEY4), p_v4);
|
|
|
|
|
|
|
|
// Insertion of of K-V pairs, multiple times (overwrites).
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
for (size_t i = 0; i < NUM_REPEAT; i++) {
|
|
|
|
// Create value strings of arbitrary length RAND_VALUES_LENGTH bytes.
|
|
|
|
p_v5 = rnd.RandomString(RAND_VALUES_LENGTH);
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
p_v6 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v7 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v8 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v9 = rnd.RandomString(RAND_VALUES_LENGTH);
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
|
|
|
|
ASSERT_OK(Put(KEY5, p_v5));
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
ASSERT_OK(Put(KEY6, p_v6));
|
|
|
|
ASSERT_OK(Put(KEY7, p_v7));
|
|
|
|
ASSERT_OK(Put(KEY8, p_v8));
|
|
|
|
ASSERT_OK(Put(KEY9, p_v9));
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
|
|
|
|
ASSERT_EQ(Get(KEY1), p_v1);
|
|
|
|
ASSERT_EQ(Get(KEY2), p_v2);
|
|
|
|
ASSERT_EQ(Get(KEY3), p_v3);
|
|
|
|
ASSERT_EQ(Get(KEY4), p_v4);
|
|
|
|
ASSERT_EQ(Get(KEY5), p_v5);
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
ASSERT_EQ(Get(KEY6), p_v6);
|
|
|
|
ASSERT_EQ(Get(KEY7), p_v7);
|
|
|
|
ASSERT_EQ(Get(KEY8), p_v8);
|
|
|
|
ASSERT_EQ(Get(KEY9), p_v9);
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
}
|
|
|
|
|
|
|
|
// Check that there was at least one mempurge
|
|
|
|
const uint32_t EXPECTED_MIN_MEMPURGE_COUNT = 1;
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
// Check that there was no SST files created during flush.
|
|
|
|
const uint32_t EXPECTED_SST_COUNT = 0;
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
|
|
|
|
EXPECT_GE(mempurge_count.exchange(0), EXPECTED_MIN_MEMPURGE_COUNT);
|
|
|
|
EXPECT_EQ(sst_count.exchange(0), EXPECTED_SST_COUNT);
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
|
|
|
|
// Insertion of of K-V pairs, no overwrites.
|
|
|
|
for (size_t i = 0; i < NUM_REPEAT; i++) {
|
|
|
|
// Create value strings of arbitrary length RAND_VALUES_LENGTH bytes.
|
|
|
|
RNDKEY1 = rnd.RandomString(RAND_KEYS_LENGTH);
|
|
|
|
RNDKEY2 = rnd.RandomString(RAND_KEYS_LENGTH);
|
|
|
|
RNDKEY3 = rnd.RandomString(RAND_KEYS_LENGTH);
|
|
|
|
p_rv1 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_rv2 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_rv3 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
|
|
|
|
ASSERT_OK(Put(RNDKEY1, p_rv1));
|
|
|
|
ASSERT_OK(Put(RNDKEY2, p_rv2));
|
|
|
|
ASSERT_OK(Put(RNDKEY3, p_rv3));
|
|
|
|
|
|
|
|
ASSERT_EQ(Get(KEY1), p_v1);
|
|
|
|
ASSERT_EQ(Get(KEY2), p_v2);
|
|
|
|
ASSERT_EQ(Get(KEY3), p_v3);
|
|
|
|
ASSERT_EQ(Get(KEY4), p_v4);
|
|
|
|
ASSERT_EQ(Get(KEY5), p_v5);
|
|
|
|
ASSERT_EQ(Get(KEY6), p_v6);
|
|
|
|
ASSERT_EQ(Get(KEY7), p_v7);
|
|
|
|
ASSERT_EQ(Get(KEY8), p_v8);
|
|
|
|
ASSERT_EQ(Get(KEY9), p_v9);
|
|
|
|
ASSERT_EQ(Get(RNDKEY1), p_rv1);
|
|
|
|
ASSERT_EQ(Get(RNDKEY2), p_rv2);
|
|
|
|
ASSERT_EQ(Get(RNDKEY3), p_rv3);
|
|
|
|
}
|
|
|
|
|
|
|
|
// Assert that at least one flush to storage has been performed
|
|
|
|
EXPECT_GT(sst_count.exchange(0), EXPECTED_SST_COUNT);
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
// (which will consequently increase the number of mempurges recorded too).
|
|
|
|
EXPECT_GE(mempurge_count.exchange(0), EXPECTED_MIN_MEMPURGE_COUNT);
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
|
|
|
|
// Assert that there is no data corruption, even with
|
|
|
|
// a flush to storage.
|
|
|
|
ASSERT_EQ(Get(KEY1), p_v1);
|
|
|
|
ASSERT_EQ(Get(KEY2), p_v2);
|
|
|
|
ASSERT_EQ(Get(KEY3), p_v3);
|
|
|
|
ASSERT_EQ(Get(KEY4), p_v4);
|
|
|
|
ASSERT_EQ(Get(KEY5), p_v5);
|
|
|
|
ASSERT_EQ(Get(KEY6), p_v6);
|
|
|
|
ASSERT_EQ(Get(KEY7), p_v7);
|
|
|
|
ASSERT_EQ(Get(KEY8), p_v8);
|
|
|
|
ASSERT_EQ(Get(KEY9), p_v9);
|
|
|
|
ASSERT_EQ(Get(RNDKEY1), p_rv1);
|
|
|
|
ASSERT_EQ(Get(RNDKEY2), p_rv2);
|
|
|
|
ASSERT_EQ(Get(RNDKEY3), p_rv3);
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
|
|
|
|
Close();
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, MemPurgeDeleteAndDeleteRange) {
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
|
|
|
|
options.statistics = CreateDBStatistics();
|
|
|
|
options.statistics->set_stats_level(StatsLevel::kAll);
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.compression = kNoCompression;
|
|
|
|
options.inplace_update_support = false;
|
|
|
|
options.allow_concurrent_memtable_write = true;
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
|
|
TestFlushListener* listener = new TestFlushListener(options.env, this);
|
|
|
|
options.listeners.emplace_back(listener);
|
|
|
|
#endif // !ROCKSDB_LITE
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
// Enforce size of a single MemTable to 64MB (64MB = 67108864 bytes).
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
options.write_buffer_size = 1 << 20;
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
// Activate the MemPurge prototype.
|
|
|
|
options.experimental_mempurge_threshold = 1.0;
|
|
|
|
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
ASSERT_OK(TryReopen(options));
|
|
|
|
|
|
|
|
std::atomic<uint32_t> mempurge_count{0};
|
|
|
|
std::atomic<uint32_t> sst_count{0};
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->SetCallBack(
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
"DBImpl::FlushJob:MemPurgeSuccessful",
|
|
|
|
[&](void* /*arg*/) { mempurge_count++; });
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->SetCallBack(
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
"DBImpl::FlushJob:SSTFileCreated", [&](void* /*arg*/) { sst_count++; });
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
std::string KEY1 = "ThisIsKey1";
|
|
|
|
std::string KEY2 = "ThisIsKey2";
|
|
|
|
std::string KEY3 = "ThisIsKey3";
|
|
|
|
std::string KEY4 = "ThisIsKey4";
|
|
|
|
std::string KEY5 = "ThisIsKey5";
|
|
|
|
const std::string NOT_FOUND = "NOT_FOUND";
|
|
|
|
|
|
|
|
Random rnd(117);
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
const size_t NUM_REPEAT = 100;
|
|
|
|
const size_t RAND_VALUES_LENGTH = 10240;
|
|
|
|
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
std::string key, value, p_v1, p_v2, p_v3, p_v3b, p_v4, p_v5;
|
|
|
|
int count = 0;
|
|
|
|
const int EXPECTED_COUNT_FORLOOP = 3;
|
|
|
|
const int EXPECTED_COUNT_END = 4;
|
|
|
|
|
|
|
|
ReadOptions ropt;
|
|
|
|
ropt.pin_data = true;
|
|
|
|
ropt.total_order_seek = true;
|
|
|
|
Iterator* iter = nullptr;
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
// Insertion of of K-V pairs, multiple times.
|
|
|
|
// Also insert DeleteRange
|
|
|
|
for (size_t i = 0; i < NUM_REPEAT; i++) {
|
|
|
|
// Create value strings of arbitrary length RAND_VALUES_LENGTH bytes.
|
|
|
|
p_v1 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v2 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v3 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v3b = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v4 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v5 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
ASSERT_OK(Put(KEY1, p_v1));
|
|
|
|
ASSERT_OK(Put(KEY2, p_v2));
|
|
|
|
ASSERT_OK(Put(KEY3, p_v3));
|
|
|
|
ASSERT_OK(Put(KEY4, p_v4));
|
|
|
|
ASSERT_OK(Put(KEY5, p_v5));
|
|
|
|
ASSERT_OK(Delete(KEY2));
|
|
|
|
ASSERT_OK(db_->DeleteRange(WriteOptions(), db_->DefaultColumnFamily(), KEY2,
|
|
|
|
KEY4));
|
|
|
|
ASSERT_OK(Put(KEY3, p_v3b));
|
|
|
|
ASSERT_OK(db_->DeleteRange(WriteOptions(), db_->DefaultColumnFamily(), KEY1,
|
|
|
|
KEY3));
|
|
|
|
ASSERT_OK(Delete(KEY1));
|
|
|
|
|
|
|
|
ASSERT_EQ(Get(KEY1), NOT_FOUND);
|
|
|
|
ASSERT_EQ(Get(KEY2), NOT_FOUND);
|
|
|
|
ASSERT_EQ(Get(KEY3), p_v3b);
|
|
|
|
ASSERT_EQ(Get(KEY4), p_v4);
|
|
|
|
ASSERT_EQ(Get(KEY5), p_v5);
|
|
|
|
|
|
|
|
iter = db_->NewIterator(ropt);
|
|
|
|
iter->SeekToFirst();
|
|
|
|
count = 0;
|
|
|
|
for (; iter->Valid(); iter->Next()) {
|
|
|
|
ASSERT_OK(iter->status());
|
|
|
|
key = (iter->key()).ToString(false);
|
|
|
|
value = (iter->value()).ToString(false);
|
|
|
|
if (key.compare(KEY3) == 0)
|
|
|
|
ASSERT_EQ(value, p_v3b);
|
|
|
|
else if (key.compare(KEY4) == 0)
|
|
|
|
ASSERT_EQ(value, p_v4);
|
|
|
|
else if (key.compare(KEY5) == 0)
|
|
|
|
ASSERT_EQ(value, p_v5);
|
|
|
|
else
|
|
|
|
ASSERT_EQ(value, NOT_FOUND);
|
|
|
|
count++;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Expected count here is 3: KEY3, KEY4, KEY5.
|
|
|
|
ASSERT_EQ(count, EXPECTED_COUNT_FORLOOP);
|
|
|
|
if (iter) {
|
|
|
|
delete iter;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// Check that there was at least one mempurge
|
|
|
|
const uint32_t EXPECTED_MIN_MEMPURGE_COUNT = 1;
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
// Check that there was no SST files created during flush.
|
|
|
|
const uint32_t EXPECTED_SST_COUNT = 0;
|
|
|
|
|
|
|
|
EXPECT_GE(mempurge_count.exchange(0), EXPECTED_MIN_MEMPURGE_COUNT);
|
|
|
|
EXPECT_EQ(sst_count.exchange(0), EXPECTED_SST_COUNT);
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
|
|
|
|
// Additional test for the iterator+memPurge.
|
|
|
|
ASSERT_OK(Put(KEY2, p_v2));
|
|
|
|
iter = db_->NewIterator(ropt);
|
|
|
|
iter->SeekToFirst();
|
|
|
|
ASSERT_OK(Put(KEY4, p_v4));
|
|
|
|
count = 0;
|
|
|
|
for (; iter->Valid(); iter->Next()) {
|
|
|
|
ASSERT_OK(iter->status());
|
|
|
|
key = (iter->key()).ToString(false);
|
|
|
|
value = (iter->value()).ToString(false);
|
|
|
|
if (key.compare(KEY2) == 0)
|
|
|
|
ASSERT_EQ(value, p_v2);
|
|
|
|
else if (key.compare(KEY3) == 0)
|
|
|
|
ASSERT_EQ(value, p_v3b);
|
|
|
|
else if (key.compare(KEY4) == 0)
|
|
|
|
ASSERT_EQ(value, p_v4);
|
|
|
|
else if (key.compare(KEY5) == 0)
|
|
|
|
ASSERT_EQ(value, p_v5);
|
|
|
|
else
|
|
|
|
ASSERT_EQ(value, NOT_FOUND);
|
|
|
|
count++;
|
|
|
|
}
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
// Expected count here is 4: KEY2, KEY3, KEY4, KEY5.
|
|
|
|
ASSERT_EQ(count, EXPECTED_COUNT_END);
|
|
|
|
if (iter) delete iter;
|
|
|
|
|
|
|
|
Close();
|
|
|
|
}
|
|
|
|
|
|
|
|
// Create a Compaction Fitler that will be invoked
|
|
|
|
// at flush time and will update the value of a KV pair
|
|
|
|
// if the key string is "lower" than the filter_key_ string.
|
|
|
|
class ConditionalUpdateFilter : public CompactionFilter {
|
|
|
|
public:
|
|
|
|
explicit ConditionalUpdateFilter(const std::string* filtered_key)
|
|
|
|
: filtered_key_(filtered_key) {}
|
|
|
|
bool Filter(int /*level*/, const Slice& key, const Slice& /*value*/,
|
|
|
|
std::string* new_value, bool* value_changed) const override {
|
|
|
|
// If key<filtered_key_, update the value of the KV-pair.
|
|
|
|
if (key.compare(*filtered_key_) < 0) {
|
|
|
|
assert(new_value != nullptr);
|
|
|
|
*new_value = NEW_VALUE;
|
|
|
|
*value_changed = true;
|
|
|
|
}
|
|
|
|
return false /*do not remove this KV-pair*/;
|
|
|
|
}
|
|
|
|
|
|
|
|
const char* Name() const override { return "ConditionalUpdateFilter"; }
|
|
|
|
|
|
|
|
private:
|
|
|
|
const std::string* filtered_key_;
|
|
|
|
};
|
|
|
|
|
|
|
|
class ConditionalUpdateFilterFactory : public CompactionFilterFactory {
|
|
|
|
public:
|
|
|
|
explicit ConditionalUpdateFilterFactory(const Slice& filtered_key)
|
|
|
|
: filtered_key_(filtered_key.ToString()) {}
|
|
|
|
|
|
|
|
std::unique_ptr<CompactionFilter> CreateCompactionFilter(
|
|
|
|
const CompactionFilter::Context& /*context*/) override {
|
|
|
|
return std::unique_ptr<CompactionFilter>(
|
|
|
|
new ConditionalUpdateFilter(&filtered_key_));
|
|
|
|
}
|
|
|
|
|
|
|
|
const char* Name() const override { return "ConditionalUpdateFilterFactory"; }
|
|
|
|
|
|
|
|
bool ShouldFilterTableFileCreation(
|
|
|
|
TableFileCreationReason reason) const override {
|
|
|
|
// This compaction filter will be invoked
|
|
|
|
// at flush time (and therefore at MemPurge time).
|
|
|
|
return (reason == TableFileCreationReason::kFlush);
|
|
|
|
}
|
|
|
|
|
|
|
|
private:
|
|
|
|
std::string filtered_key_;
|
|
|
|
};
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, MemPurgeAndCompactionFilter) {
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
|
|
|
|
std::string KEY1 = "ThisIsKey1";
|
|
|
|
std::string KEY2 = "ThisIsKey2";
|
|
|
|
std::string KEY3 = "ThisIsKey3";
|
|
|
|
std::string KEY4 = "ThisIsKey4";
|
|
|
|
std::string KEY5 = "ThisIsKey5";
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
std::string KEY6 = "ThisIsKey6";
|
|
|
|
std::string KEY7 = "ThisIsKey7";
|
|
|
|
std::string KEY8 = "ThisIsKey8";
|
|
|
|
std::string KEY9 = "ThisIsKey9";
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
const std::string NOT_FOUND = "NOT_FOUND";
|
|
|
|
|
|
|
|
options.statistics = CreateDBStatistics();
|
|
|
|
options.statistics->set_stats_level(StatsLevel::kAll);
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.compression = kNoCompression;
|
|
|
|
options.inplace_update_support = false;
|
|
|
|
options.allow_concurrent_memtable_write = true;
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
|
|
TestFlushListener* listener = new TestFlushListener(options.env, this);
|
|
|
|
options.listeners.emplace_back(listener);
|
|
|
|
#endif // !ROCKSDB_LITE
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
// Create a ConditionalUpdate compaction filter
|
|
|
|
// that will update all the values of the KV pairs
|
|
|
|
// where the keys are "lower" than KEY4.
|
|
|
|
options.compaction_filter_factory =
|
|
|
|
std::make_shared<ConditionalUpdateFilterFactory>(KEY4);
|
|
|
|
|
|
|
|
// Enforce size of a single MemTable to 64MB (64MB = 67108864 bytes).
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
options.write_buffer_size = 1 << 20;
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
// Activate the MemPurge prototype.
|
|
|
|
options.experimental_mempurge_threshold = 1.0;
|
|
|
|
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
ASSERT_OK(TryReopen(options));
|
|
|
|
|
|
|
|
std::atomic<uint32_t> mempurge_count{0};
|
|
|
|
std::atomic<uint32_t> sst_count{0};
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"DBImpl::FlushJob:MemPurgeSuccessful",
|
|
|
|
[&](void* /*arg*/) { mempurge_count++; });
|
|
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"DBImpl::FlushJob:SSTFileCreated", [&](void* /*arg*/) { sst_count++; });
|
|
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
Random rnd(53);
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
const size_t NUM_REPEAT = 1000;
|
|
|
|
const size_t RAND_VALUES_LENGTH = 10240;
|
|
|
|
std::string p_v1, p_v2, p_v3, p_v4, p_v5, p_v6, p_v7, p_v8, p_v9;
|
|
|
|
|
|
|
|
p_v1 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v2 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v3 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v4 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v5 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
ASSERT_OK(Put(KEY1, p_v1));
|
|
|
|
ASSERT_OK(Put(KEY2, p_v2));
|
|
|
|
ASSERT_OK(Put(KEY3, p_v3));
|
|
|
|
ASSERT_OK(Put(KEY4, p_v4));
|
|
|
|
ASSERT_OK(Put(KEY5, p_v5));
|
|
|
|
ASSERT_OK(Delete(KEY1));
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
|
|
|
|
// Insertion of of K-V pairs, multiple times.
|
|
|
|
for (size_t i = 0; i < NUM_REPEAT; i++) {
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
// Create value strings of arbitrary
|
|
|
|
// length RAND_VALUES_LENGTH bytes.
|
|
|
|
p_v6 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v7 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v8 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
p_v9 = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
ASSERT_OK(Put(KEY6, p_v6));
|
|
|
|
ASSERT_OK(Put(KEY7, p_v7));
|
|
|
|
ASSERT_OK(Put(KEY8, p_v8));
|
|
|
|
ASSERT_OK(Put(KEY9, p_v9));
|
|
|
|
|
|
|
|
ASSERT_OK(Delete(KEY7));
|
|
|
|
}
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
// Check that there was at least one mempurge
|
|
|
|
const uint32_t EXPECTED_MIN_MEMPURGE_COUNT = 1;
|
|
|
|
// Check that there was no SST files created during flush.
|
|
|
|
const uint32_t EXPECTED_SST_COUNT = 0;
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
|
|
|
|
EXPECT_GE(mempurge_count.exchange(0), EXPECTED_MIN_MEMPURGE_COUNT);
|
|
|
|
EXPECT_EQ(sst_count.exchange(0), EXPECTED_SST_COUNT);
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
|
Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
3 years ago
|
|
|
// Verify that the ConditionalUpdateCompactionFilter
|
|
|
|
// updated the values of KEY2 and KEY3, and not KEY4 and KEY5.
|
|
|
|
ASSERT_EQ(Get(KEY1), NOT_FOUND);
|
|
|
|
ASSERT_EQ(Get(KEY2), NEW_VALUE);
|
|
|
|
ASSERT_EQ(Get(KEY3), NEW_VALUE);
|
|
|
|
ASSERT_EQ(Get(KEY4), p_v4);
|
|
|
|
ASSERT_EQ(Get(KEY5), p_v5);
|
Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
3 years ago
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, DISABLED_MemPurgeWALSupport) {
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
|
|
|
|
options.statistics = CreateDBStatistics();
|
|
|
|
options.statistics->set_stats_level(StatsLevel::kAll);
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.compression = kNoCompression;
|
|
|
|
options.inplace_update_support = false;
|
|
|
|
options.allow_concurrent_memtable_write = true;
|
|
|
|
|
Add simple heuristics for experimental mempurge. (#8583)
Summary:
Add `experimental_mempurge_policy` option flag and introduce two new `MemPurge` (Memtable Garbage Collection) policies: 'ALWAYS' and 'ALTERNATE'. Default value: ALTERNATE.
`ALWAYS`: every flush will first go through a `MemPurge` process. If the output is too big to fit into a single memtable, then the mempurge is aborted and a regular flush process carries on. `ALWAYS` is designed for user that need to reduce the number of L0 SST file created to a strict minimum, and can afford a small dent in performance (possibly hits to CPU usage, read efficiency, and maximum burst write throughput).
`ALTERNATE`: a flush is transformed into a `MemPurge` except if one of the memtables being flushed is the product of a previous `MemPurge`. `ALTERNATE` is a good tradeoff between reduction in number of L0 SST files created and performance. `ALTERNATE` perform particularly well for completely random garbage ratios, or garbage ratios anywhere in (0%,50%], and even higher when there is a wild variability in garbage ratios.
This PR also includes support for `experimental_mempurge_policy` in `db_bench`.
Testing was done locally by replacing all the `MemPurge` policies of the unit tests with `ALTERNATE`, as well as local testing with `db_crashtest.py` `whitebox` and `blackbox`. Overall, if an `ALWAYS` mempurge policy passes the tests, there is no reasons why an `ALTERNATE` policy would fail, and therefore the mempurge policy was set to `ALWAYS` for all mempurge unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8583
Reviewed By: pdillinger
Differential Revision: D29888050
Pulled By: bjlemaire
fbshipit-source-id: e2cf26646d66679f6f5fb29842624615610759c1
3 years ago
|
|
|
// Enforce size of a single MemTable to 128KB.
|
|
|
|
options.write_buffer_size = 128 << 10;
|
|
|
|
// Activate the MemPurge prototype.
|
|
|
|
options.experimental_mempurge_threshold = 1.0;
|
|
|
|
|
|
|
|
ASSERT_OK(TryReopen(options));
|
|
|
|
|
|
|
|
const size_t KVSIZE = 10;
|
|
|
|
|
|
|
|
do {
|
|
|
|
CreateAndReopenWithCF({"pikachu"}, options);
|
|
|
|
ASSERT_OK(Put(1, "foo", "v1"));
|
|
|
|
ASSERT_OK(Put(1, "baz", "v5"));
|
|
|
|
|
|
|
|
ReopenWithColumnFamilies({"default", "pikachu"}, options);
|
|
|
|
ASSERT_EQ("v1", Get(1, "foo"));
|
|
|
|
|
|
|
|
ASSERT_EQ("v1", Get(1, "foo"));
|
|
|
|
ASSERT_EQ("v5", Get(1, "baz"));
|
|
|
|
ASSERT_OK(Put(0, "bar", "v2"));
|
|
|
|
ASSERT_OK(Put(1, "bar", "v2"));
|
|
|
|
ASSERT_OK(Put(1, "foo", "v3"));
|
|
|
|
std::atomic<uint32_t> mempurge_count{0};
|
|
|
|
std::atomic<uint32_t> sst_count{0};
|
|
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"DBImpl::FlushJob:MemPurgeSuccessful",
|
|
|
|
[&](void* /*arg*/) { mempurge_count++; });
|
|
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"DBImpl::FlushJob:SSTFileCreated", [&](void* /*arg*/) { sst_count++; });
|
|
|
|
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
std::vector<std::string> keys;
|
|
|
|
for (size_t k = 0; k < KVSIZE; k++) {
|
|
|
|
keys.push_back("IamKey" + std::to_string(k));
|
|
|
|
}
|
|
|
|
|
|
|
|
std::string RNDKEY, RNDVALUE;
|
|
|
|
const std::string NOT_FOUND = "NOT_FOUND";
|
|
|
|
|
|
|
|
// Heavy overwrite workload,
|
|
|
|
// more than would fit in maximum allowed memtables.
|
|
|
|
Random rnd(719);
|
|
|
|
const size_t NUM_REPEAT = 100;
|
Add simple heuristics for experimental mempurge. (#8583)
Summary:
Add `experimental_mempurge_policy` option flag and introduce two new `MemPurge` (Memtable Garbage Collection) policies: 'ALWAYS' and 'ALTERNATE'. Default value: ALTERNATE.
`ALWAYS`: every flush will first go through a `MemPurge` process. If the output is too big to fit into a single memtable, then the mempurge is aborted and a regular flush process carries on. `ALWAYS` is designed for user that need to reduce the number of L0 SST file created to a strict minimum, and can afford a small dent in performance (possibly hits to CPU usage, read efficiency, and maximum burst write throughput).
`ALTERNATE`: a flush is transformed into a `MemPurge` except if one of the memtables being flushed is the product of a previous `MemPurge`. `ALTERNATE` is a good tradeoff between reduction in number of L0 SST files created and performance. `ALTERNATE` perform particularly well for completely random garbage ratios, or garbage ratios anywhere in (0%,50%], and even higher when there is a wild variability in garbage ratios.
This PR also includes support for `experimental_mempurge_policy` in `db_bench`.
Testing was done locally by replacing all the `MemPurge` policies of the unit tests with `ALTERNATE`, as well as local testing with `db_crashtest.py` `whitebox` and `blackbox`. Overall, if an `ALWAYS` mempurge policy passes the tests, there is no reasons why an `ALTERNATE` policy would fail, and therefore the mempurge policy was set to `ALWAYS` for all mempurge unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8583
Reviewed By: pdillinger
Differential Revision: D29888050
Pulled By: bjlemaire
fbshipit-source-id: e2cf26646d66679f6f5fb29842624615610759c1
3 years ago
|
|
|
const size_t RAND_KEY_LENGTH = 4096;
|
|
|
|
const size_t RAND_VALUES_LENGTH = 1024;
|
|
|
|
std::vector<std::string> values_default(KVSIZE), values_pikachu(KVSIZE);
|
|
|
|
|
|
|
|
// Insert a very first set of keys that will be
|
|
|
|
// mempurged at least once.
|
|
|
|
for (size_t k = 0; k < KVSIZE / 2; k++) {
|
|
|
|
values_default[k] = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
values_pikachu[k] = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
}
|
|
|
|
|
|
|
|
// Insert keys[0:KVSIZE/2] to
|
|
|
|
// both 'default' and 'pikachu' CFs.
|
|
|
|
for (size_t k = 0; k < KVSIZE / 2; k++) {
|
|
|
|
ASSERT_OK(Put(0, keys[k], values_default[k]));
|
|
|
|
ASSERT_OK(Put(1, keys[k], values_pikachu[k]));
|
|
|
|
}
|
|
|
|
|
|
|
|
// Check that the insertion was seamless.
|
|
|
|
for (size_t k = 0; k < KVSIZE / 2; k++) {
|
|
|
|
ASSERT_EQ(Get(0, keys[k]), values_default[k]);
|
|
|
|
ASSERT_EQ(Get(1, keys[k]), values_pikachu[k]);
|
|
|
|
}
|
|
|
|
|
|
|
|
// Insertion of of K-V pairs, multiple times (overwrites)
|
|
|
|
// into 'default' CF. Will trigger mempurge.
|
|
|
|
for (size_t j = 0; j < NUM_REPEAT; j++) {
|
|
|
|
// Create value strings of arbitrary length RAND_VALUES_LENGTH bytes.
|
|
|
|
for (size_t k = KVSIZE / 2; k < KVSIZE; k++) {
|
|
|
|
values_default[k] = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
}
|
|
|
|
|
|
|
|
// Insert K-V into default CF.
|
|
|
|
for (size_t k = KVSIZE / 2; k < KVSIZE; k++) {
|
|
|
|
ASSERT_OK(Put(0, keys[k], values_default[k]));
|
|
|
|
}
|
|
|
|
|
|
|
|
// Check key validity, for all keys, both in
|
|
|
|
// default and pikachu CFs.
|
|
|
|
for (size_t k = 0; k < KVSIZE; k++) {
|
|
|
|
ASSERT_EQ(Get(0, keys[k]), values_default[k]);
|
|
|
|
}
|
|
|
|
// Note that at this point, only keys[0:KVSIZE/2]
|
|
|
|
// have been inserted into Pikachu.
|
|
|
|
for (size_t k = 0; k < KVSIZE / 2; k++) {
|
|
|
|
ASSERT_EQ(Get(1, keys[k]), values_pikachu[k]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// Insertion of of K-V pairs, multiple times (overwrites)
|
|
|
|
// into 'pikachu' CF. Will trigger mempurge.
|
|
|
|
// Check that we keep the older logs for 'default' imm().
|
|
|
|
for (size_t j = 0; j < NUM_REPEAT; j++) {
|
|
|
|
// Create value strings of arbitrary length RAND_VALUES_LENGTH bytes.
|
|
|
|
for (size_t k = KVSIZE / 2; k < KVSIZE; k++) {
|
|
|
|
values_pikachu[k] = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
}
|
|
|
|
|
|
|
|
// Insert K-V into pikachu CF.
|
|
|
|
for (size_t k = KVSIZE / 2; k < KVSIZE; k++) {
|
|
|
|
ASSERT_OK(Put(1, keys[k], values_pikachu[k]));
|
|
|
|
}
|
|
|
|
|
|
|
|
// Check key validity, for all keys,
|
|
|
|
// both in default and pikachu.
|
|
|
|
for (size_t k = 0; k < KVSIZE; k++) {
|
|
|
|
ASSERT_EQ(Get(0, keys[k]), values_default[k]);
|
|
|
|
ASSERT_EQ(Get(1, keys[k]), values_pikachu[k]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// Check that there was at least one mempurge
|
|
|
|
const uint32_t EXPECTED_MIN_MEMPURGE_COUNT = 1;
|
|
|
|
// Check that there was no SST files created during flush.
|
|
|
|
const uint32_t EXPECTED_SST_COUNT = 0;
|
|
|
|
|
|
|
|
EXPECT_GE(mempurge_count.exchange(0), EXPECTED_MIN_MEMPURGE_COUNT);
|
|
|
|
if (options.experimental_mempurge_threshold ==
|
|
|
|
std::numeric_limits<double>::max()) {
|
|
|
|
EXPECT_EQ(sst_count.exchange(0), EXPECTED_SST_COUNT);
|
Add simple heuristics for experimental mempurge. (#8583)
Summary:
Add `experimental_mempurge_policy` option flag and introduce two new `MemPurge` (Memtable Garbage Collection) policies: 'ALWAYS' and 'ALTERNATE'. Default value: ALTERNATE.
`ALWAYS`: every flush will first go through a `MemPurge` process. If the output is too big to fit into a single memtable, then the mempurge is aborted and a regular flush process carries on. `ALWAYS` is designed for user that need to reduce the number of L0 SST file created to a strict minimum, and can afford a small dent in performance (possibly hits to CPU usage, read efficiency, and maximum burst write throughput).
`ALTERNATE`: a flush is transformed into a `MemPurge` except if one of the memtables being flushed is the product of a previous `MemPurge`. `ALTERNATE` is a good tradeoff between reduction in number of L0 SST files created and performance. `ALTERNATE` perform particularly well for completely random garbage ratios, or garbage ratios anywhere in (0%,50%], and even higher when there is a wild variability in garbage ratios.
This PR also includes support for `experimental_mempurge_policy` in `db_bench`.
Testing was done locally by replacing all the `MemPurge` policies of the unit tests with `ALTERNATE`, as well as local testing with `db_crashtest.py` `whitebox` and `blackbox`. Overall, if an `ALWAYS` mempurge policy passes the tests, there is no reasons why an `ALTERNATE` policy would fail, and therefore the mempurge policy was set to `ALWAYS` for all mempurge unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8583
Reviewed By: pdillinger
Differential Revision: D29888050
Pulled By: bjlemaire
fbshipit-source-id: e2cf26646d66679f6f5fb29842624615610759c1
3 years ago
|
|
|
}
|
|
|
|
|
|
|
|
ReopenWithColumnFamilies({"default", "pikachu"}, options);
|
|
|
|
// Check that there was no data corruption anywhere,
|
|
|
|
// not in 'default' nor in 'Pikachu' CFs.
|
|
|
|
ASSERT_EQ("v3", Get(1, "foo"));
|
|
|
|
ASSERT_OK(Put(1, "foo", "v4"));
|
|
|
|
ASSERT_EQ("v4", Get(1, "foo"));
|
|
|
|
ASSERT_EQ("v2", Get(1, "bar"));
|
|
|
|
ASSERT_EQ("v5", Get(1, "baz"));
|
|
|
|
// Check keys in 'Default' and 'Pikachu'.
|
|
|
|
// keys[0:KVSIZE/2] were for sure contained
|
|
|
|
// in the imm() at Reopen/recovery time.
|
|
|
|
for (size_t k = 0; k < KVSIZE; k++) {
|
|
|
|
ASSERT_EQ(Get(0, keys[k]), values_default[k]);
|
|
|
|
ASSERT_EQ(Get(1, keys[k]), values_pikachu[k]);
|
|
|
|
}
|
|
|
|
// Insertion of random K-V pairs to trigger
|
|
|
|
// a flush in the Pikachu CF.
|
|
|
|
for (size_t j = 0; j < NUM_REPEAT; j++) {
|
|
|
|
RNDKEY = rnd.RandomString(RAND_KEY_LENGTH);
|
|
|
|
RNDVALUE = rnd.RandomString(RAND_VALUES_LENGTH);
|
|
|
|
ASSERT_OK(Put(1, RNDKEY, RNDVALUE));
|
|
|
|
}
|
|
|
|
// ASsert than there was at least one flush to storage.
|
|
|
|
EXPECT_GT(sst_count.exchange(0), EXPECTED_SST_COUNT);
|
|
|
|
ReopenWithColumnFamilies({"default", "pikachu"}, options);
|
|
|
|
ASSERT_EQ("v4", Get(1, "foo"));
|
|
|
|
ASSERT_EQ("v2", Get(1, "bar"));
|
|
|
|
ASSERT_EQ("v5", Get(1, "baz"));
|
|
|
|
// Since values in default are held in mutable mem()
|
|
|
|
// and imm(), check if the flush in pikachu didn't
|
|
|
|
// affect these values.
|
|
|
|
for (size_t k = 0; k < KVSIZE; k++) {
|
|
|
|
ASSERT_EQ(Get(0, keys[k]), values_default[k]);
|
|
|
|
ASSERT_EQ(Get(1, keys[k]), values_pikachu[k]);
|
|
|
|
}
|
|
|
|
ASSERT_EQ(Get(1, RNDKEY), RNDVALUE);
|
|
|
|
} while (ChangeWalOptions());
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_P(DBFlushDirectIOTest, DirectIO) {
|
|
|
|
Options options;
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.disable_auto_compactions = true;
|
|
|
|
options.max_background_flushes = 2;
|
|
|
|
options.use_direct_io_for_flush_and_compaction = GetParam();
|
|
|
|
options.env = MockEnv::Create(Env::Default());
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"BuildTable:create_file", [&](void* arg) {
|
|
|
|
bool* use_direct_writes = static_cast<bool*>(arg);
|
|
|
|
ASSERT_EQ(*use_direct_writes,
|
|
|
|
options.use_direct_io_for_flush_and_compaction);
|
|
|
|
});
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
Reopen(options);
|
|
|
|
ASSERT_OK(Put("foo", "v"));
|
|
|
|
FlushOptions flush_options;
|
|
|
|
flush_options.wait = true;
|
|
|
|
ASSERT_OK(dbfull()->Flush(flush_options));
|
|
|
|
Destroy(options);
|
|
|
|
delete options.env;
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, FlushError) {
|
|
|
|
Options options;
|
|
|
|
std::unique_ptr<FaultInjectionTestEnv> fault_injection_env(
|
|
|
|
new FaultInjectionTestEnv(env_));
|
|
|
|
options.write_buffer_size = 100;
|
|
|
|
options.max_write_buffer_number = 4;
|
|
|
|
options.min_write_buffer_number_to_merge = 3;
|
|
|
|
options.disable_auto_compactions = true;
|
|
|
|
options.env = fault_injection_env.get();
|
|
|
|
Reopen(options);
|
|
|
|
|
|
|
|
ASSERT_OK(Put("key1", "value1"));
|
|
|
|
ASSERT_OK(Put("key2", "value2"));
|
|
|
|
fault_injection_env->SetFilesystemActive(false);
|
|
|
|
Status s = dbfull()->TEST_SwitchMemtable();
|
|
|
|
fault_injection_env->SetFilesystemActive(true);
|
|
|
|
Destroy(options);
|
|
|
|
ASSERT_NE(s, Status::OK());
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, ManualFlushFailsInReadOnlyMode) {
|
|
|
|
// Regression test for bug where manual flush hangs forever when the DB
|
|
|
|
// is in read-only mode. Verify it now at least returns, despite failing.
|
|
|
|
Options options;
|
|
|
|
std::unique_ptr<FaultInjectionTestEnv> fault_injection_env(
|
|
|
|
new FaultInjectionTestEnv(env_));
|
|
|
|
options.env = fault_injection_env.get();
|
|
|
|
options.max_write_buffer_number = 2;
|
|
|
|
Reopen(options);
|
|
|
|
|
|
|
|
// Trigger a first flush but don't let it run
|
|
|
|
ASSERT_OK(db_->PauseBackgroundWork());
|
|
|
|
ASSERT_OK(Put("key1", "value1"));
|
|
|
|
FlushOptions flush_opts;
|
|
|
|
flush_opts.wait = false;
|
|
|
|
ASSERT_OK(db_->Flush(flush_opts));
|
|
|
|
|
|
|
|
// Write a key to the second memtable so we have something to flush later
|
|
|
|
// after the DB is in read-only mode.
|
|
|
|
ASSERT_OK(Put("key2", "value2"));
|
|
|
|
|
|
|
|
// Let the first flush continue, hit an error, and put the DB in read-only
|
|
|
|
// mode.
|
|
|
|
fault_injection_env->SetFilesystemActive(false);
|
|
|
|
ASSERT_OK(db_->ContinueBackgroundWork());
|
|
|
|
// We ingested the error to env, so the returned status is not OK.
|
|
|
|
ASSERT_NOK(dbfull()->TEST_WaitForFlushMemTable());
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
|
|
uint64_t num_bg_errors;
|
|
|
|
ASSERT_TRUE(db_->GetIntProperty(DB::Properties::kBackgroundErrors,
|
|
|
|
&num_bg_errors));
|
|
|
|
ASSERT_GT(num_bg_errors, 0);
|
|
|
|
#endif // ROCKSDB_LITE
|
|
|
|
|
|
|
|
// In the bug scenario, triggering another flush would cause the second flush
|
|
|
|
// to hang forever. After the fix we expect it to return an error.
|
|
|
|
ASSERT_NOK(db_->Flush(FlushOptions()));
|
|
|
|
|
|
|
|
Close();
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, CFDropRaceWithWaitForFlushMemTables) {
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.create_if_missing = true;
|
|
|
|
CreateAndReopenWithCF({"pikachu"}, options);
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->LoadDependency(
|
|
|
|
{{"DBImpl::FlushMemTable:AfterScheduleFlush",
|
|
|
|
"DBFlushTest::CFDropRaceWithWaitForFlushMemTables:BeforeDrop"},
|
|
|
|
{"DBFlushTest::CFDropRaceWithWaitForFlushMemTables:AfterFree",
|
|
|
|
"DBImpl::BackgroundCallFlush:start"},
|
|
|
|
{"DBImpl::BackgroundCallFlush:start",
|
|
|
|
"DBImpl::FlushMemTable:BeforeWaitForBgFlush"}});
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
ASSERT_EQ(2, handles_.size());
|
|
|
|
ASSERT_OK(Put(1, "key", "value"));
|
|
|
|
auto* cfd = static_cast<ColumnFamilyHandleImpl*>(handles_[1])->cfd();
|
|
|
|
port::Thread drop_cf_thr([&]() {
|
|
|
|
TEST_SYNC_POINT(
|
|
|
|
"DBFlushTest::CFDropRaceWithWaitForFlushMemTables:BeforeDrop");
|
|
|
|
ASSERT_OK(dbfull()->DropColumnFamily(handles_[1]));
|
|
|
|
ASSERT_OK(dbfull()->DestroyColumnFamilyHandle(handles_[1]));
|
|
|
|
handles_.resize(1);
|
|
|
|
TEST_SYNC_POINT(
|
|
|
|
"DBFlushTest::CFDropRaceWithWaitForFlushMemTables:AfterFree");
|
|
|
|
});
|
|
|
|
FlushOptions flush_opts;
|
|
|
|
flush_opts.allow_write_stall = true;
|
|
|
|
ASSERT_NOK(dbfull()->TEST_FlushMemTable(cfd, flush_opts));
|
|
|
|
drop_cf_thr.join();
|
|
|
|
Close();
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
|
|
TEST_F(DBFlushTest, FireOnFlushCompletedAfterCommittedResult) {
|
|
|
|
class TestListener : public EventListener {
|
|
|
|
public:
|
|
|
|
void OnFlushCompleted(DB* db, const FlushJobInfo& info) override {
|
|
|
|
// There's only one key in each flush.
|
|
|
|
ASSERT_EQ(info.smallest_seqno, info.largest_seqno);
|
|
|
|
ASSERT_NE(0, info.smallest_seqno);
|
|
|
|
if (info.smallest_seqno == seq1) {
|
|
|
|
// First flush completed
|
|
|
|
ASSERT_FALSE(completed1);
|
|
|
|
completed1 = true;
|
|
|
|
CheckFlushResultCommitted(db, seq1);
|
|
|
|
} else {
|
|
|
|
// Second flush completed
|
|
|
|
ASSERT_FALSE(completed2);
|
|
|
|
completed2 = true;
|
|
|
|
ASSERT_EQ(info.smallest_seqno, seq2);
|
|
|
|
CheckFlushResultCommitted(db, seq2);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void CheckFlushResultCommitted(DB* db, SequenceNumber seq) {
|
|
|
|
DBImpl* db_impl = static_cast_with_check<DBImpl>(db);
|
|
|
|
InstrumentedMutex* mutex = db_impl->mutex();
|
|
|
|
mutex->Lock();
|
|
|
|
auto* cfd = static_cast_with_check<ColumnFamilyHandleImpl>(
|
|
|
|
db->DefaultColumnFamily())
|
|
|
|
->cfd();
|
|
|
|
ASSERT_LT(seq, cfd->imm()->current()->GetEarliestSequenceNumber());
|
|
|
|
mutex->Unlock();
|
|
|
|
}
|
|
|
|
|
|
|
|
std::atomic<SequenceNumber> seq1{0};
|
|
|
|
std::atomic<SequenceNumber> seq2{0};
|
|
|
|
std::atomic<bool> completed1{false};
|
|
|
|
std::atomic<bool> completed2{false};
|
|
|
|
};
|
|
|
|
std::shared_ptr<TestListener> listener = std::make_shared<TestListener>();
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->LoadDependency(
|
|
|
|
{{"DBImpl::FlushMemTableToOutputFile:AfterPickMemtables",
|
|
|
|
"DBFlushTest::FireOnFlushCompletedAfterCommittedResult:WaitFirst"},
|
|
|
|
{"DBImpl::FlushMemTableToOutputFile:Finish",
|
|
|
|
"DBFlushTest::FireOnFlushCompletedAfterCommittedResult:WaitSecond"}});
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"FlushJob::WriteLevel0Table", [&listener](void* arg) {
|
|
|
|
// Wait for the second flush finished, out of mutex.
|
|
|
|
auto* mems = reinterpret_cast<autovector<MemTable*>*>(arg);
|
|
|
|
if (mems->front()->GetEarliestSequenceNumber() == listener->seq1 - 1) {
|
|
|
|
TEST_SYNC_POINT(
|
|
|
|
"DBFlushTest::FireOnFlushCompletedAfterCommittedResult:"
|
|
|
|
"WaitSecond");
|
|
|
|
}
|
|
|
|
});
|
|
|
|
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.listeners.push_back(listener);
|
|
|
|
// Setting max_flush_jobs = max_background_jobs / 4 = 2.
|
|
|
|
options.max_background_jobs = 8;
|
|
|
|
// Allow 2 immutable memtables.
|
|
|
|
options.max_write_buffer_number = 3;
|
|
|
|
Reopen(options);
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
ASSERT_OK(Put("foo", "v"));
|
|
|
|
listener->seq1 = db_->GetLatestSequenceNumber();
|
|
|
|
// t1 will wait for the second flush complete before committing flush result.
|
|
|
|
auto t1 = port::Thread([&]() {
|
|
|
|
// flush_opts.wait = true
|
|
|
|
ASSERT_OK(db_->Flush(FlushOptions()));
|
|
|
|
});
|
|
|
|
// Wait for first flush started.
|
|
|
|
TEST_SYNC_POINT(
|
|
|
|
"DBFlushTest::FireOnFlushCompletedAfterCommittedResult:WaitFirst");
|
|
|
|
// The second flush will exit early without commit its result. The work
|
|
|
|
// is delegated to the first flush.
|
|
|
|
ASSERT_OK(Put("bar", "v"));
|
|
|
|
listener->seq2 = db_->GetLatestSequenceNumber();
|
|
|
|
FlushOptions flush_opts;
|
|
|
|
flush_opts.wait = false;
|
|
|
|
ASSERT_OK(db_->Flush(flush_opts));
|
|
|
|
t1.join();
|
|
|
|
ASSERT_TRUE(listener->completed1);
|
|
|
|
ASSERT_TRUE(listener->completed2);
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
|
|
}
|
|
|
|
#endif // !ROCKSDB_LITE
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, FlushWithBlob) {
|
|
|
|
constexpr uint64_t min_blob_size = 10;
|
|
|
|
|
|
|
|
Options options;
|
|
|
|
options.enable_blob_files = true;
|
|
|
|
options.min_blob_size = min_blob_size;
|
|
|
|
options.disable_auto_compactions = true;
|
|
|
|
options.env = env_;
|
|
|
|
|
|
|
|
Reopen(options);
|
|
|
|
|
|
|
|
constexpr char short_value[] = "short";
|
|
|
|
static_assert(sizeof(short_value) - 1 < min_blob_size,
|
|
|
|
"short_value too long");
|
|
|
|
|
|
|
|
constexpr char long_value[] = "long_value";
|
|
|
|
static_assert(sizeof(long_value) - 1 >= min_blob_size,
|
|
|
|
"long_value too short");
|
|
|
|
|
|
|
|
ASSERT_OK(Put("key1", short_value));
|
|
|
|
ASSERT_OK(Put("key2", long_value));
|
|
|
|
|
|
|
|
ASSERT_OK(Flush());
|
|
|
|
|
|
|
|
ASSERT_EQ(Get("key1"), short_value);
|
|
|
|
ASSERT_EQ(Get("key2"), long_value);
|
|
|
|
|
|
|
|
VersionSet* const versions = dbfull()->GetVersionSet();
|
|
|
|
assert(versions);
|
|
|
|
|
|
|
|
ColumnFamilyData* const cfd = versions->GetColumnFamilySet()->GetDefault();
|
|
|
|
assert(cfd);
|
|
|
|
|
|
|
|
Version* const current = cfd->current();
|
|
|
|
assert(current);
|
|
|
|
|
|
|
|
const VersionStorageInfo* const storage_info = current->storage_info();
|
|
|
|
assert(storage_info);
|
|
|
|
|
|
|
|
const auto& l0_files = storage_info->LevelFiles(0);
|
|
|
|
ASSERT_EQ(l0_files.size(), 1);
|
|
|
|
|
|
|
|
const FileMetaData* const table_file = l0_files[0];
|
|
|
|
assert(table_file);
|
|
|
|
|
|
|
|
const auto& blob_files = storage_info->GetBlobFiles();
|
|
|
|
ASSERT_EQ(blob_files.size(), 1);
|
|
|
|
|
Use a sorted vector instead of a map to store blob file metadata (#9526)
Summary:
The patch replaces `std::map` with a sorted `std::vector` for
`VersionStorageInfo::blob_files_` and preallocates the space
for the `vector` before saving the `BlobFileMetaData` into the
new `VersionStorageInfo` in `VersionBuilder::Rep::SaveBlobFilesTo`.
These changes reduce the time the DB mutex is held while
saving new `Version`s, and using a sorted `vector` also makes
lookups faster thanks to better memory locality.
In addition, the patch introduces helper methods
`VersionStorageInfo::GetBlobFileMetaData` and
`VersionStorageInfo::GetBlobFileMetaDataLB` that can be used by
clients to perform lookups in the `vector`, and does some general
cleanup in the parts of code where blob file metadata are used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9526
Test Plan:
Ran `make check` and the crash test script for a while.
Performance was tested using a load-optimized benchmark (`fillseq` with vector memtable, no WAL) and small file sizes so that a significant number of files are produced:
```
numactl --interleave=all ./db_bench --benchmarks=fillseq --allow_concurrent_memtable_write=false --level0_file_num_compaction_trigger=4 --level0_slowdown_writes_trigger=20 --level0_stop_writes_trigger=30 --max_background_jobs=8 --max_write_buffer_number=8 --db=/data/ltamasi-dbbench --wal_dir=/data/ltamasi-dbbench --num=800000000 --num_levels=8 --key_size=20 --value_size=400 --block_size=8192 --cache_size=51539607552 --cache_numshardbits=6 --compression_max_dict_bytes=0 --compression_ratio=0.5 --compression_type=lz4 --bytes_per_sync=8388608 --cache_index_and_filter_blocks=1 --cache_high_pri_pool_ratio=0.5 --benchmark_write_rate_limit=0 --write_buffer_size=16777216 --target_file_size_base=16777216 --max_bytes_for_level_base=67108864 --verify_checksum=1 --delete_obsolete_files_period_micros=62914560 --max_bytes_for_level_multiplier=8 --statistics=0 --stats_per_interval=1 --stats_interval_seconds=20 --histogram=1 --memtablerep=skip_list --bloom_bits=10 --open_files=-1 --subcompactions=1 --compaction_style=0 --min_level_to_compress=3 --level_compaction_dynamic_level_bytes=true --pin_l0_filter_and_index_blocks_in_cache=1 --soft_pending_compaction_bytes_limit=167503724544 --hard_pending_compaction_bytes_limit=335007449088 --min_level_to_compress=0 --use_existing_db=0 --sync=0 --threads=1 --memtablerep=vector --allow_concurrent_memtable_write=false --disable_wal=1 --enable_blob_files=1 --blob_file_size=16777216 --min_blob_size=0 --blob_compression_type=lz4 --enable_blob_garbage_collection=1 --seed=<some value>
```
Final statistics before the patch:
```
Cumulative writes: 0 writes, 700M keys, 0 commit groups, 0.0 writes per commit group, ingest: 284.62 GB, 121.27 MB/s
Interval writes: 0 writes, 334K keys, 0 commit groups, 0.0 writes per commit group, ingest: 139.28 MB, 72.46 MB/s
```
With the patch:
```
Cumulative writes: 0 writes, 760M keys, 0 commit groups, 0.0 writes per commit group, ingest: 308.66 GB, 131.52 MB/s
Interval writes: 0 writes, 445K keys, 0 commit groups, 0.0 writes per commit group, ingest: 185.35 MB, 93.15 MB/s
```
Total time to complete the benchmark is 2611 seconds with the patch, down from 2986 secs.
Reviewed By: riversand963
Differential Revision: D34082728
Pulled By: ltamasi
fbshipit-source-id: fc598abf676dce436734d06bb9d2d99a26a004fc
3 years ago
|
|
|
const auto& blob_file = blob_files.front();
|
|
|
|
assert(blob_file);
|
|
|
|
|
|
|
|
ASSERT_EQ(table_file->smallest.user_key(), "key1");
|
|
|
|
ASSERT_EQ(table_file->largest.user_key(), "key2");
|
|
|
|
ASSERT_EQ(table_file->fd.smallest_seqno, 1);
|
|
|
|
ASSERT_EQ(table_file->fd.largest_seqno, 2);
|
|
|
|
ASSERT_EQ(table_file->oldest_blob_file_number,
|
|
|
|
blob_file->GetBlobFileNumber());
|
|
|
|
|
|
|
|
ASSERT_EQ(blob_file->GetTotalBlobCount(), 1);
|
|
|
|
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
|
|
const InternalStats* const internal_stats = cfd->internal_stats();
|
|
|
|
assert(internal_stats);
|
|
|
|
|
|
|
|
const auto& compaction_stats = internal_stats->TEST_GetCompactionStats();
|
|
|
|
ASSERT_FALSE(compaction_stats.empty());
|
|
|
|
ASSERT_EQ(compaction_stats[0].bytes_written, table_file->fd.GetFileSize());
|
|
|
|
ASSERT_EQ(compaction_stats[0].bytes_written_blob,
|
|
|
|
blob_file->GetTotalBlobBytes());
|
|
|
|
ASSERT_EQ(compaction_stats[0].num_output_files, 1);
|
|
|
|
ASSERT_EQ(compaction_stats[0].num_output_files_blob, 1);
|
|
|
|
|
|
|
|
const uint64_t* const cf_stats_value = internal_stats->TEST_GetCFStatsValue();
|
|
|
|
ASSERT_EQ(cf_stats_value[InternalStats::BYTES_FLUSHED],
|
|
|
|
compaction_stats[0].bytes_written +
|
|
|
|
compaction_stats[0].bytes_written_blob);
|
|
|
|
#endif // ROCKSDB_LITE
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, FlushWithChecksumHandoff1) {
|
|
|
|
if (mem_env_ || encrypted_env_) {
|
|
|
|
ROCKSDB_GTEST_SKIP("Test requires non-mem or non-encrypted environment");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
std::shared_ptr<FaultInjectionTestFS> fault_fs(
|
|
|
|
new FaultInjectionTestFS(FileSystem::Default()));
|
|
|
|
std::unique_ptr<Env> fault_fs_env(NewCompositeEnv(fault_fs));
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.write_buffer_size = 100;
|
|
|
|
options.max_write_buffer_number = 4;
|
|
|
|
options.min_write_buffer_number_to_merge = 3;
|
|
|
|
options.disable_auto_compactions = true;
|
|
|
|
options.env = fault_fs_env.get();
|
|
|
|
options.checksum_handoff_file_types.Add(FileType::kTableFile);
|
|
|
|
Reopen(options);
|
|
|
|
|
|
|
|
fault_fs->SetChecksumHandoffFuncType(ChecksumType::kCRC32c);
|
|
|
|
ASSERT_OK(Put("key1", "value1"));
|
|
|
|
ASSERT_OK(Put("key2", "value2"));
|
|
|
|
ASSERT_OK(dbfull()->TEST_SwitchMemtable());
|
|
|
|
|
|
|
|
// The hash does not match, write fails
|
|
|
|
// fault_fs->SetChecksumHandoffFuncType(ChecksumType::kxxHash);
|
|
|
|
// Since the file system returns IOStatus::Corruption, it is an
|
|
|
|
// unrecoverable error.
|
|
|
|
SyncPoint::GetInstance()->SetCallBack("FlushJob::Start", [&](void*) {
|
|
|
|
fault_fs->SetChecksumHandoffFuncType(ChecksumType::kxxHash);
|
|
|
|
});
|
|
|
|
ASSERT_OK(Put("key3", "value3"));
|
|
|
|
ASSERT_OK(Put("key4", "value4"));
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
Status s = Flush();
|
|
|
|
ASSERT_EQ(s.severity(),
|
|
|
|
ROCKSDB_NAMESPACE::Status::Severity::kUnrecoverableError);
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
Destroy(options);
|
|
|
|
Reopen(options);
|
|
|
|
|
|
|
|
// The file system does not support checksum handoff. The check
|
|
|
|
// will be ignored.
|
|
|
|
fault_fs->SetChecksumHandoffFuncType(ChecksumType::kNoChecksum);
|
|
|
|
ASSERT_OK(Put("key5", "value5"));
|
|
|
|
ASSERT_OK(Put("key6", "value6"));
|
|
|
|
ASSERT_OK(dbfull()->TEST_SwitchMemtable());
|
|
|
|
|
|
|
|
// Each write will be similated as corrupted.
|
|
|
|
// Since the file system returns IOStatus::Corruption, it is an
|
|
|
|
// unrecoverable error.
|
|
|
|
fault_fs->SetChecksumHandoffFuncType(ChecksumType::kCRC32c);
|
|
|
|
SyncPoint::GetInstance()->SetCallBack("FlushJob::Start", [&](void*) {
|
|
|
|
fault_fs->IngestDataCorruptionBeforeWrite();
|
|
|
|
});
|
|
|
|
ASSERT_OK(Put("key7", "value7"));
|
|
|
|
ASSERT_OK(Put("key8", "value8"));
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
s = Flush();
|
|
|
|
ASSERT_EQ(s.severity(),
|
|
|
|
ROCKSDB_NAMESPACE::Status::Severity::kUnrecoverableError);
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
|
|
|
|
Destroy(options);
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, FlushWithChecksumHandoff2) {
|
|
|
|
if (mem_env_ || encrypted_env_) {
|
|
|
|
ROCKSDB_GTEST_SKIP("Test requires non-mem or non-encrypted environment");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
std::shared_ptr<FaultInjectionTestFS> fault_fs(
|
|
|
|
new FaultInjectionTestFS(FileSystem::Default()));
|
|
|
|
std::unique_ptr<Env> fault_fs_env(NewCompositeEnv(fault_fs));
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.write_buffer_size = 100;
|
|
|
|
options.max_write_buffer_number = 4;
|
|
|
|
options.min_write_buffer_number_to_merge = 3;
|
|
|
|
options.disable_auto_compactions = true;
|
|
|
|
options.env = fault_fs_env.get();
|
|
|
|
Reopen(options);
|
|
|
|
|
|
|
|
fault_fs->SetChecksumHandoffFuncType(ChecksumType::kCRC32c);
|
|
|
|
ASSERT_OK(Put("key1", "value1"));
|
|
|
|
ASSERT_OK(Put("key2", "value2"));
|
|
|
|
ASSERT_OK(Flush());
|
|
|
|
|
|
|
|
// options is not set, the checksum handoff will not be triggered
|
|
|
|
SyncPoint::GetInstance()->SetCallBack("FlushJob::Start", [&](void*) {
|
|
|
|
fault_fs->SetChecksumHandoffFuncType(ChecksumType::kxxHash);
|
|
|
|
});
|
|
|
|
ASSERT_OK(Put("key3", "value3"));
|
|
|
|
ASSERT_OK(Put("key4", "value4"));
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
ASSERT_OK(Flush());
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
Destroy(options);
|
|
|
|
Reopen(options);
|
|
|
|
|
|
|
|
// The file system does not support checksum handoff. The check
|
|
|
|
// will be ignored.
|
|
|
|
fault_fs->SetChecksumHandoffFuncType(ChecksumType::kNoChecksum);
|
|
|
|
ASSERT_OK(Put("key5", "value5"));
|
|
|
|
ASSERT_OK(Put("key6", "value6"));
|
|
|
|
ASSERT_OK(Flush());
|
|
|
|
|
|
|
|
// options is not set, the checksum handoff will not be triggered
|
|
|
|
fault_fs->SetChecksumHandoffFuncType(ChecksumType::kCRC32c);
|
|
|
|
SyncPoint::GetInstance()->SetCallBack("FlushJob::Start", [&](void*) {
|
|
|
|
fault_fs->IngestDataCorruptionBeforeWrite();
|
|
|
|
});
|
|
|
|
ASSERT_OK(Put("key7", "value7"));
|
|
|
|
ASSERT_OK(Put("key8", "value8"));
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
ASSERT_OK(Flush());
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
|
|
|
|
Destroy(options);
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, FlushWithChecksumHandoffManifest1) {
|
|
|
|
if (mem_env_ || encrypted_env_) {
|
|
|
|
ROCKSDB_GTEST_SKIP("Test requires non-mem or non-encrypted environment");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
std::shared_ptr<FaultInjectionTestFS> fault_fs(
|
|
|
|
new FaultInjectionTestFS(FileSystem::Default()));
|
|
|
|
std::unique_ptr<Env> fault_fs_env(NewCompositeEnv(fault_fs));
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.write_buffer_size = 100;
|
|
|
|
options.max_write_buffer_number = 4;
|
|
|
|
options.min_write_buffer_number_to_merge = 3;
|
|
|
|
options.disable_auto_compactions = true;
|
|
|
|
options.env = fault_fs_env.get();
|
|
|
|
options.checksum_handoff_file_types.Add(FileType::kDescriptorFile);
|
|
|
|
fault_fs->SetChecksumHandoffFuncType(ChecksumType::kCRC32c);
|
|
|
|
Reopen(options);
|
|
|
|
|
|
|
|
ASSERT_OK(Put("key1", "value1"));
|
|
|
|
ASSERT_OK(Put("key2", "value2"));
|
|
|
|
ASSERT_OK(Flush());
|
|
|
|
|
|
|
|
// The hash does not match, write fails
|
|
|
|
// fault_fs->SetChecksumHandoffFuncType(ChecksumType::kxxHash);
|
|
|
|
// Since the file system returns IOStatus::Corruption, it is mapped to
|
|
|
|
// kFatalError error.
|
|
|
|
ASSERT_OK(Put("key3", "value3"));
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"VersionSet::LogAndApply:WriteManifest", [&](void*) {
|
|
|
|
fault_fs->SetChecksumHandoffFuncType(ChecksumType::kxxHash);
|
|
|
|
});
|
|
|
|
ASSERT_OK(Put("key3", "value3"));
|
|
|
|
ASSERT_OK(Put("key4", "value4"));
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
Status s = Flush();
|
|
|
|
ASSERT_EQ(s.severity(), ROCKSDB_NAMESPACE::Status::Severity::kFatalError);
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
Destroy(options);
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, FlushWithChecksumHandoffManifest2) {
|
|
|
|
if (mem_env_ || encrypted_env_) {
|
|
|
|
ROCKSDB_GTEST_SKIP("Test requires non-mem or non-encrypted environment");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
std::shared_ptr<FaultInjectionTestFS> fault_fs(
|
|
|
|
new FaultInjectionTestFS(FileSystem::Default()));
|
|
|
|
std::unique_ptr<Env> fault_fs_env(NewCompositeEnv(fault_fs));
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.write_buffer_size = 100;
|
|
|
|
options.max_write_buffer_number = 4;
|
|
|
|
options.min_write_buffer_number_to_merge = 3;
|
|
|
|
options.disable_auto_compactions = true;
|
|
|
|
options.env = fault_fs_env.get();
|
|
|
|
options.checksum_handoff_file_types.Add(FileType::kDescriptorFile);
|
|
|
|
fault_fs->SetChecksumHandoffFuncType(ChecksumType::kNoChecksum);
|
|
|
|
Reopen(options);
|
|
|
|
// The file system does not support checksum handoff. The check
|
|
|
|
// will be ignored.
|
|
|
|
ASSERT_OK(Put("key5", "value5"));
|
|
|
|
ASSERT_OK(Put("key6", "value6"));
|
|
|
|
ASSERT_OK(Flush());
|
|
|
|
|
|
|
|
// Each write will be similated as corrupted.
|
|
|
|
// Since the file system returns IOStatus::Corruption, it is mapped to
|
|
|
|
// kFatalError error.
|
|
|
|
fault_fs->SetChecksumHandoffFuncType(ChecksumType::kCRC32c);
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"VersionSet::LogAndApply:WriteManifest",
|
|
|
|
[&](void*) { fault_fs->IngestDataCorruptionBeforeWrite(); });
|
|
|
|
ASSERT_OK(Put("key7", "value7"));
|
|
|
|
ASSERT_OK(Put("key8", "value8"));
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
Status s = Flush();
|
|
|
|
ASSERT_EQ(s.severity(), ROCKSDB_NAMESPACE::Status::Severity::kFatalError);
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
|
|
|
|
Destroy(options);
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(DBFlushTest, PickRightMemtables) {
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
DestroyAndReopen(options);
|
|
|
|
options.create_if_missing = true;
|
|
|
|
|
|
|
|
const std::string test_cf_name = "test_cf";
|
|
|
|
options.max_write_buffer_number = 128;
|
|
|
|
CreateColumnFamilies({test_cf_name}, options);
|
|
|
|
|
|
|
|
Close();
|
|
|
|
|
|
|
|
ReopenWithColumnFamilies({kDefaultColumnFamilyName, test_cf_name}, options);
|
|
|
|
|
|
|
|
ASSERT_OK(db_->Put(WriteOptions(), "key", "value"));
|
|
|
|
|
|
|
|
ASSERT_OK(db_->Put(WriteOptions(), handles_[1], "key", "value"));
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"DBImpl::SyncClosedLogs:BeforeReLock", [&](void* /*arg*/) {
|
|
|
|
ASSERT_OK(db_->Put(WriteOptions(), handles_[1], "what", "v"));
|
|
|
|
auto* cfhi =
|
|
|
|
static_cast_with_check<ColumnFamilyHandleImpl>(handles_[1]);
|
|
|
|
assert(cfhi);
|
|
|
|
ASSERT_OK(dbfull()->TEST_SwitchMemtable(cfhi->cfd()));
|
|
|
|
});
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"DBImpl::FlushMemTableToOutputFile:AfterPickMemtables", [&](void* arg) {
|
|
|
|
auto* job = reinterpret_cast<FlushJob*>(arg);
|
|
|
|
assert(job);
|
|
|
|
const auto& mems = job->GetMemTables();
|
|
|
|
assert(mems.size() == 1);
|
|
|
|
assert(mems[0]);
|
|
|
|
ASSERT_EQ(1, mems[0]->GetID());
|
|
|
|
});
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
ASSERT_OK(db_->Flush(FlushOptions(), handles_[1]));
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
|
|
}
|
|
|
|
|
|
|
|
class DBFlushTestBlobError : public DBFlushTest,
|
|
|
|
public testing::WithParamInterface<std::string> {
|
|
|
|
public:
|
Do not explicitly flush blob files when using the integrated BlobDB (#7892)
Summary:
In the original stacked BlobDB implementation, which writes blobs to blob files
immediately and treats blob files as logs, it makes sense to flush the file after
writing each blob to protect against process crashes; however, in the integrated
implementation, which builds blob files in the background jobs, this unnecessarily
reduces performance. This patch fixes this by simply adding a `do_flush` flag to
`BlobLogWriter`, which is set to `true` by the stacked implementation and to `false`
by the new code. Note: the change itself is trivial but the tests needed some work;
since in the new implementation, blobs are now buffered, adding a blob to
`BlobFileBuilder` is no longer guaranteed to result in an actual I/O. Therefore, we can
no longer rely on `FaultInjectionTestEnv` when testing failure cases; instead, we
manipulate the return values of I/O methods directly using `SyncPoint`s.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7892
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D26022814
Pulled By: ltamasi
fbshipit-source-id: b3dce419f312137fa70d84cdd9b908fd5d60d8cd
4 years ago
|
|
|
DBFlushTestBlobError() : sync_point_(GetParam()) {}
|
|
|
|
|
|
|
|
std::string sync_point_;
|
|
|
|
};
|
|
|
|
|
|
|
|
INSTANTIATE_TEST_CASE_P(DBFlushTestBlobError, DBFlushTestBlobError,
|
|
|
|
::testing::ValuesIn(std::vector<std::string>{
|
|
|
|
"BlobFileBuilder::WriteBlobToFile:AddRecord",
|
|
|
|
"BlobFileBuilder::WriteBlobToFile:AppendFooter"}));
|
|
|
|
|
|
|
|
TEST_P(DBFlushTestBlobError, FlushError) {
|
|
|
|
Options options;
|
|
|
|
options.enable_blob_files = true;
|
|
|
|
options.disable_auto_compactions = true;
|
Do not explicitly flush blob files when using the integrated BlobDB (#7892)
Summary:
In the original stacked BlobDB implementation, which writes blobs to blob files
immediately and treats blob files as logs, it makes sense to flush the file after
writing each blob to protect against process crashes; however, in the integrated
implementation, which builds blob files in the background jobs, this unnecessarily
reduces performance. This patch fixes this by simply adding a `do_flush` flag to
`BlobLogWriter`, which is set to `true` by the stacked implementation and to `false`
by the new code. Note: the change itself is trivial but the tests needed some work;
since in the new implementation, blobs are now buffered, adding a blob to
`BlobFileBuilder` is no longer guaranteed to result in an actual I/O. Therefore, we can
no longer rely on `FaultInjectionTestEnv` when testing failure cases; instead, we
manipulate the return values of I/O methods directly using `SyncPoint`s.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7892
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D26022814
Pulled By: ltamasi
fbshipit-source-id: b3dce419f312137fa70d84cdd9b908fd5d60d8cd
4 years ago
|
|
|
options.env = env_;
|
|
|
|
|
|
|
|
Reopen(options);
|
|
|
|
|
|
|
|
ASSERT_OK(Put("key", "blob"));
|
|
|
|
|
Do not explicitly flush blob files when using the integrated BlobDB (#7892)
Summary:
In the original stacked BlobDB implementation, which writes blobs to blob files
immediately and treats blob files as logs, it makes sense to flush the file after
writing each blob to protect against process crashes; however, in the integrated
implementation, which builds blob files in the background jobs, this unnecessarily
reduces performance. This patch fixes this by simply adding a `do_flush` flag to
`BlobLogWriter`, which is set to `true` by the stacked implementation and to `false`
by the new code. Note: the change itself is trivial but the tests needed some work;
since in the new implementation, blobs are now buffered, adding a blob to
`BlobFileBuilder` is no longer guaranteed to result in an actual I/O. Therefore, we can
no longer rely on `FaultInjectionTestEnv` when testing failure cases; instead, we
manipulate the return values of I/O methods directly using `SyncPoint`s.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7892
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D26022814
Pulled By: ltamasi
fbshipit-source-id: b3dce419f312137fa70d84cdd9b908fd5d60d8cd
4 years ago
|
|
|
SyncPoint::GetInstance()->SetCallBack(sync_point_, [this](void* arg) {
|
|
|
|
Status* const s = static_cast<Status*>(arg);
|
|
|
|
assert(s);
|
|
|
|
|
|
|
|
(*s) = Status::IOError(sync_point_);
|
|
|
|
});
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
ASSERT_NOK(Flush());
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
|
|
|
|
|
|
VersionSet* const versions = dbfull()->GetVersionSet();
|
|
|
|
assert(versions);
|
|
|
|
|
|
|
|
ColumnFamilyData* const cfd = versions->GetColumnFamilySet()->GetDefault();
|
|
|
|
assert(cfd);
|
|
|
|
|
|
|
|
Version* const current = cfd->current();
|
|
|
|
assert(current);
|
|
|
|
|
|
|
|
const VersionStorageInfo* const storage_info = current->storage_info();
|
|
|
|
assert(storage_info);
|
|
|
|
|
|
|
|
const auto& l0_files = storage_info->LevelFiles(0);
|
|
|
|
ASSERT_TRUE(l0_files.empty());
|
|
|
|
|
|
|
|
const auto& blob_files = storage_info->GetBlobFiles();
|
|
|
|
ASSERT_TRUE(blob_files.empty());
|
|
|
|
|
|
|
|
// Make sure the files generated by the failed job have been deleted
|
|
|
|
std::vector<std::string> files;
|
|
|
|
ASSERT_OK(env_->GetChildren(dbname_, &files));
|
|
|
|
for (const auto& file : files) {
|
|
|
|
uint64_t number = 0;
|
|
|
|
FileType type = kTableFile;
|
|
|
|
|
|
|
|
if (!ParseFileName(file, &number, &type)) {
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
ASSERT_NE(type, kTableFile);
|
|
|
|
ASSERT_NE(type, kBlobFile);
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
|
|
const InternalStats* const internal_stats = cfd->internal_stats();
|
|
|
|
assert(internal_stats);
|
|
|
|
|
|
|
|
const auto& compaction_stats = internal_stats->TEST_GetCompactionStats();
|
|
|
|
ASSERT_FALSE(compaction_stats.empty());
|
|
|
|
|
|
|
|
if (sync_point_ == "BlobFileBuilder::WriteBlobToFile:AddRecord") {
|
|
|
|
ASSERT_EQ(compaction_stats[0].bytes_written, 0);
|
|
|
|
ASSERT_EQ(compaction_stats[0].bytes_written_blob, 0);
|
|
|
|
ASSERT_EQ(compaction_stats[0].num_output_files, 0);
|
|
|
|
ASSERT_EQ(compaction_stats[0].num_output_files_blob, 0);
|
|
|
|
} else {
|
|
|
|
// SST file writing succeeded; blob file writing failed (during Finish)
|
|
|
|
ASSERT_GT(compaction_stats[0].bytes_written, 0);
|
|
|
|
ASSERT_EQ(compaction_stats[0].bytes_written_blob, 0);
|
|
|
|
ASSERT_EQ(compaction_stats[0].num_output_files, 1);
|
|
|
|
ASSERT_EQ(compaction_stats[0].num_output_files_blob, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
const uint64_t* const cf_stats_value = internal_stats->TEST_GetCFStatsValue();
|
|
|
|
ASSERT_EQ(cf_stats_value[InternalStats::BYTES_FLUSHED],
|
|
|
|
compaction_stats[0].bytes_written +
|
|
|
|
compaction_stats[0].bytes_written_blob);
|
|
|
|
#endif // ROCKSDB_LITE
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
|
|
TEST_P(DBAtomicFlushTest, ManualFlushUnder2PC) {
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.allow_2pc = true;
|
|
|
|
options.atomic_flush = GetParam();
|
|
|
|
// 64MB so that memtable flush won't be trigger by the small writes.
|
|
|
|
options.write_buffer_size = (static_cast<size_t>(64) << 20);
|
|
|
|
|
|
|
|
// Destroy the DB to recreate as a TransactionDB.
|
|
|
|
Close();
|
|
|
|
Destroy(options, true);
|
|
|
|
|
|
|
|
// Create a TransactionDB.
|
|
|
|
TransactionDB* txn_db = nullptr;
|
|
|
|
TransactionDBOptions txn_db_opts;
|
|
|
|
txn_db_opts.write_policy = TxnDBWritePolicy::WRITE_COMMITTED;
|
|
|
|
ASSERT_OK(TransactionDB::Open(options, txn_db_opts, dbname_, &txn_db));
|
|
|
|
ASSERT_NE(txn_db, nullptr);
|
|
|
|
db_ = txn_db;
|
|
|
|
|
|
|
|
// Create two more columns other than default CF.
|
|
|
|
std::vector<std::string> cfs = {"puppy", "kitty"};
|
|
|
|
CreateColumnFamilies(cfs, options);
|
|
|
|
ASSERT_EQ(handles_.size(), 2);
|
|
|
|
ASSERT_EQ(handles_[0]->GetName(), cfs[0]);
|
|
|
|
ASSERT_EQ(handles_[1]->GetName(), cfs[1]);
|
|
|
|
const size_t kNumCfToFlush = options.atomic_flush ? 2 : 1;
|
|
|
|
|
|
|
|
WriteOptions wopts;
|
|
|
|
TransactionOptions txn_opts;
|
|
|
|
// txn1 only prepare, but does not commit.
|
|
|
|
// The WAL containing the prepared but uncommitted data must be kept.
|
|
|
|
Transaction* txn1 = txn_db->BeginTransaction(wopts, txn_opts, nullptr);
|
|
|
|
// txn2 not only prepare, but also commit.
|
|
|
|
Transaction* txn2 = txn_db->BeginTransaction(wopts, txn_opts, nullptr);
|
|
|
|
ASSERT_NE(txn1, nullptr);
|
|
|
|
ASSERT_NE(txn2, nullptr);
|
|
|
|
for (size_t i = 0; i < kNumCfToFlush; i++) {
|
|
|
|
ASSERT_OK(txn1->Put(handles_[i], "k1", "v1"));
|
|
|
|
ASSERT_OK(txn2->Put(handles_[i], "k2", "v2"));
|
|
|
|
}
|
|
|
|
// A txn must be named before prepare.
|
|
|
|
ASSERT_OK(txn1->SetName("txn1"));
|
|
|
|
ASSERT_OK(txn2->SetName("txn2"));
|
|
|
|
// Prepare writes to WAL, but not to memtable. (WriteCommitted)
|
|
|
|
ASSERT_OK(txn1->Prepare());
|
|
|
|
ASSERT_OK(txn2->Prepare());
|
|
|
|
// Commit writes to memtable.
|
|
|
|
ASSERT_OK(txn2->Commit());
|
|
|
|
delete txn1;
|
|
|
|
delete txn2;
|
|
|
|
|
|
|
|
// There are still data in memtable not flushed.
|
|
|
|
// But since data is small enough to reside in the active memtable,
|
|
|
|
// there are no immutable memtable.
|
|
|
|
for (size_t i = 0; i < kNumCfToFlush; i++) {
|
|
|
|
auto cfh = static_cast<ColumnFamilyHandleImpl*>(handles_[i]);
|
|
|
|
ASSERT_EQ(0, cfh->cfd()->imm()->NumNotFlushed());
|
|
|
|
ASSERT_FALSE(cfh->cfd()->mem()->IsEmpty());
|
|
|
|
}
|
|
|
|
|
|
|
|
// Atomic flush memtables,
|
|
|
|
// the min log with prepared data should be written to MANIFEST.
|
|
|
|
std::vector<ColumnFamilyHandle*> cfs_to_flush(kNumCfToFlush);
|
|
|
|
for (size_t i = 0; i < kNumCfToFlush; i++) {
|
|
|
|
cfs_to_flush[i] = handles_[i];
|
|
|
|
}
|
|
|
|
ASSERT_OK(txn_db->Flush(FlushOptions(), cfs_to_flush));
|
|
|
|
|
|
|
|
// There are no remaining data in memtable after flush.
|
|
|
|
for (size_t i = 0; i < kNumCfToFlush; i++) {
|
|
|
|
auto cfh = static_cast<ColumnFamilyHandleImpl*>(handles_[i]);
|
|
|
|
ASSERT_EQ(0, cfh->cfd()->imm()->NumNotFlushed());
|
|
|
|
ASSERT_TRUE(cfh->cfd()->mem()->IsEmpty());
|
|
|
|
ASSERT_EQ(cfh->cfd()->GetFlushReason(), FlushReason::kManualFlush);
|
|
|
|
}
|
|
|
|
|
|
|
|
// The recovered min log number with prepared data should be non-zero.
|
|
|
|
// In 2pc mode, MinLogNumberToKeep returns the
|
|
|
|
// VersionSet::min_log_number_to_keep_2pc recovered from MANIFEST, if it's 0,
|
|
|
|
// it means atomic flush didn't write the min_log_number_to_keep to MANIFEST.
|
|
|
|
cfs.push_back(kDefaultColumnFamilyName);
|
|
|
|
ASSERT_OK(TryReopenWithColumnFamilies(cfs, options));
|
|
|
|
DBImpl* db_impl = reinterpret_cast<DBImpl*>(db_);
|
|
|
|
ASSERT_TRUE(db_impl->allow_2pc());
|
|
|
|
ASSERT_NE(db_impl->MinLogNumberToKeep(), 0);
|
|
|
|
}
|
|
|
|
#endif // ROCKSDB_LITE
|
|
|
|
|
|
|
|
TEST_P(DBAtomicFlushTest, ManualAtomicFlush) {
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.atomic_flush = GetParam();
|
|
|
|
options.write_buffer_size = (static_cast<size_t>(64) << 20);
|
|
|
|
|
|
|
|
CreateAndReopenWithCF({"pikachu", "eevee"}, options);
|
|
|
|
size_t num_cfs = handles_.size();
|
|
|
|
ASSERT_EQ(3, num_cfs);
|
|
|
|
WriteOptions wopts;
|
|
|
|
wopts.disableWAL = true;
|
|
|
|
for (size_t i = 0; i != num_cfs; ++i) {
|
|
|
|
ASSERT_OK(Put(static_cast<int>(i) /*cf*/, "key", "value", wopts));
|
|
|
|
}
|
|
|
|
|
|
|
|
for (size_t i = 0; i != num_cfs; ++i) {
|
|
|
|
auto cfh = static_cast<ColumnFamilyHandleImpl*>(handles_[i]);
|
|
|
|
ASSERT_EQ(0, cfh->cfd()->imm()->NumNotFlushed());
|
|
|
|
ASSERT_FALSE(cfh->cfd()->mem()->IsEmpty());
|
|
|
|
}
|
|
|
|
|
|
|
|
std::vector<int> cf_ids;
|
|
|
|
for (size_t i = 0; i != num_cfs; ++i) {
|
|
|
|
cf_ids.emplace_back(static_cast<int>(i));
|
|
|
|
}
|
|
|
|
ASSERT_OK(Flush(cf_ids));
|
|
|
|
|
|
|
|
for (size_t i = 0; i != num_cfs; ++i) {
|
|
|
|
auto cfh = static_cast<ColumnFamilyHandleImpl*>(handles_[i]);
|
|
|
|
ASSERT_EQ(cfh->cfd()->GetFlushReason(), FlushReason::kManualFlush);
|
|
|
|
ASSERT_EQ(0, cfh->cfd()->imm()->NumNotFlushed());
|
|
|
|
ASSERT_TRUE(cfh->cfd()->mem()->IsEmpty());
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_P(DBAtomicFlushTest, PrecomputeMinLogNumberToKeepNon2PC) {
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.atomic_flush = GetParam();
|
|
|
|
options.write_buffer_size = (static_cast<size_t>(64) << 20);
|
|
|
|
CreateAndReopenWithCF({"pikachu"}, options);
|
|
|
|
|
|
|
|
const size_t num_cfs = handles_.size();
|
|
|
|
ASSERT_EQ(num_cfs, 2);
|
|
|
|
WriteOptions wopts;
|
|
|
|
for (size_t i = 0; i != num_cfs; ++i) {
|
|
|
|
ASSERT_OK(Put(static_cast<int>(i) /*cf*/, "key", "value", wopts));
|
|
|
|
}
|
|
|
|
|
|
|
|
{
|
|
|
|
// Flush the default CF only.
|
|
|
|
std::vector<int> cf_ids{0};
|
|
|
|
ASSERT_OK(Flush(cf_ids));
|
|
|
|
|
|
|
|
autovector<ColumnFamilyData*> flushed_cfds;
|
|
|
|
autovector<autovector<VersionEdit*>> flush_edits;
|
|
|
|
auto flushed_cfh = static_cast<ColumnFamilyHandleImpl*>(handles_[0]);
|
|
|
|
flushed_cfds.push_back(flushed_cfh->cfd());
|
|
|
|
flush_edits.push_back({});
|
|
|
|
auto unflushed_cfh = static_cast<ColumnFamilyHandleImpl*>(handles_[1]);
|
|
|
|
|
|
|
|
ASSERT_EQ(PrecomputeMinLogNumberToKeepNon2PC(dbfull()->GetVersionSet(),
|
|
|
|
flushed_cfds, flush_edits),
|
|
|
|
unflushed_cfh->cfd()->GetLogNumber());
|
|
|
|
}
|
|
|
|
|
|
|
|
{
|
|
|
|
// Flush all CFs.
|
|
|
|
std::vector<int> cf_ids;
|
|
|
|
for (size_t i = 0; i != num_cfs; ++i) {
|
|
|
|
cf_ids.emplace_back(static_cast<int>(i));
|
|
|
|
}
|
|
|
|
ASSERT_OK(Flush(cf_ids));
|
|
|
|
uint64_t log_num_after_flush = dbfull()->TEST_GetCurrentLogNumber();
|
|
|
|
|
|
|
|
uint64_t min_log_number_to_keep = port::kMaxUint64;
|
|
|
|
autovector<ColumnFamilyData*> flushed_cfds;
|
|
|
|
autovector<autovector<VersionEdit*>> flush_edits;
|
|
|
|
for (size_t i = 0; i != num_cfs; ++i) {
|
|
|
|
auto cfh = static_cast<ColumnFamilyHandleImpl*>(handles_[i]);
|
|
|
|
flushed_cfds.push_back(cfh->cfd());
|
|
|
|
flush_edits.push_back({});
|
|
|
|
min_log_number_to_keep =
|
|
|
|
std::min(min_log_number_to_keep, cfh->cfd()->GetLogNumber());
|
|
|
|
}
|
|
|
|
ASSERT_EQ(min_log_number_to_keep, log_num_after_flush);
|
|
|
|
ASSERT_EQ(PrecomputeMinLogNumberToKeepNon2PC(dbfull()->GetVersionSet(),
|
|
|
|
flushed_cfds, flush_edits),
|
|
|
|
min_log_number_to_keep);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_P(DBAtomicFlushTest, AtomicFlushTriggeredByMemTableFull) {
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.atomic_flush = GetParam();
|
|
|
|
// 4KB so that we can easily trigger auto flush.
|
|
|
|
options.write_buffer_size = 4096;
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->LoadDependency(
|
|
|
|
{{"DBImpl::BackgroundCallFlush:FlushFinish:0",
|
|
|
|
"DBAtomicFlushTest::AtomicFlushTriggeredByMemTableFull:BeforeCheck"}});
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
CreateAndReopenWithCF({"pikachu", "eevee"}, options);
|
|
|
|
size_t num_cfs = handles_.size();
|
|
|
|
ASSERT_EQ(3, num_cfs);
|
|
|
|
WriteOptions wopts;
|
|
|
|
wopts.disableWAL = true;
|
|
|
|
for (size_t i = 0; i != num_cfs; ++i) {
|
|
|
|
ASSERT_OK(Put(static_cast<int>(i) /*cf*/, "key", "value", wopts));
|
|
|
|
}
|
|
|
|
// Keep writing to one of them column families to trigger auto flush.
|
|
|
|
for (int i = 0; i != 4000; ++i) {
|
|
|
|
ASSERT_OK(Put(static_cast<int>(num_cfs) - 1 /*cf*/,
|
|
|
|
"key" + std::to_string(i), "value" + std::to_string(i),
|
|
|
|
wopts));
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_SYNC_POINT(
|
|
|
|
"DBAtomicFlushTest::AtomicFlushTriggeredByMemTableFull:BeforeCheck");
|
|
|
|
if (options.atomic_flush) {
|
|
|
|
for (size_t i = 0; i + 1 != num_cfs; ++i) {
|
|
|
|
auto cfh = static_cast<ColumnFamilyHandleImpl*>(handles_[i]);
|
|
|
|
ASSERT_EQ(0, cfh->cfd()->imm()->NumNotFlushed());
|
|
|
|
ASSERT_TRUE(cfh->cfd()->mem()->IsEmpty());
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
for (size_t i = 0; i + 1 != num_cfs; ++i) {
|
|
|
|
auto cfh = static_cast<ColumnFamilyHandleImpl*>(handles_[i]);
|
|
|
|
ASSERT_EQ(0, cfh->cfd()->imm()->NumNotFlushed());
|
|
|
|
ASSERT_FALSE(cfh->cfd()->mem()->IsEmpty());
|
|
|
|
}
|
|
|
|
}
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_P(DBAtomicFlushTest, AtomicFlushRollbackSomeJobs) {
|
|
|
|
bool atomic_flush = GetParam();
|
|
|
|
if (!atomic_flush) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
std::unique_ptr<FaultInjectionTestEnv> fault_injection_env(
|
|
|
|
new FaultInjectionTestEnv(env_));
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.atomic_flush = atomic_flush;
|
|
|
|
options.env = fault_injection_env.get();
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->LoadDependency(
|
|
|
|
{{"DBImpl::AtomicFlushMemTablesToOutputFiles:SomeFlushJobsComplete:1",
|
|
|
|
"DBAtomicFlushTest::AtomicFlushRollbackSomeJobs:1"},
|
|
|
|
{"DBAtomicFlushTest::AtomicFlushRollbackSomeJobs:2",
|
|
|
|
"DBImpl::AtomicFlushMemTablesToOutputFiles:SomeFlushJobsComplete:2"}});
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
CreateAndReopenWithCF({"pikachu", "eevee"}, options);
|
|
|
|
size_t num_cfs = handles_.size();
|
|
|
|
ASSERT_EQ(3, num_cfs);
|
|
|
|
WriteOptions wopts;
|
|
|
|
wopts.disableWAL = true;
|
|
|
|
for (size_t i = 0; i != num_cfs; ++i) {
|
|
|
|
int cf_id = static_cast<int>(i);
|
|
|
|
ASSERT_OK(Put(cf_id, "key", "value", wopts));
|
|
|
|
}
|
|
|
|
FlushOptions flush_opts;
|
|
|
|
flush_opts.wait = false;
|
|
|
|
ASSERT_OK(dbfull()->Flush(flush_opts, handles_));
|
|
|
|
TEST_SYNC_POINT("DBAtomicFlushTest::AtomicFlushRollbackSomeJobs:1");
|
|
|
|
fault_injection_env->SetFilesystemActive(false);
|
|
|
|
TEST_SYNC_POINT("DBAtomicFlushTest::AtomicFlushRollbackSomeJobs:2");
|
|
|
|
for (auto* cfh : handles_) {
|
|
|
|
// Returns the IO error happend during flush.
|
|
|
|
ASSERT_NOK(dbfull()->TEST_WaitForFlushMemTable(cfh));
|
|
|
|
}
|
|
|
|
for (size_t i = 0; i != num_cfs; ++i) {
|
|
|
|
auto cfh = static_cast<ColumnFamilyHandleImpl*>(handles_[i]);
|
|
|
|
ASSERT_EQ(1, cfh->cfd()->imm()->NumNotFlushed());
|
|
|
|
ASSERT_TRUE(cfh->cfd()->mem()->IsEmpty());
|
|
|
|
}
|
|
|
|
fault_injection_env->SetFilesystemActive(true);
|
|
|
|
Destroy(options);
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_P(DBAtomicFlushTest, FlushMultipleCFs_DropSomeBeforeRequestFlush) {
|
|
|
|
bool atomic_flush = GetParam();
|
|
|
|
if (!atomic_flush) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.atomic_flush = atomic_flush;
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
CreateAndReopenWithCF({"pikachu", "eevee"}, options);
|
|
|
|
size_t num_cfs = handles_.size();
|
|
|
|
ASSERT_EQ(3, num_cfs);
|
|
|
|
WriteOptions wopts;
|
|
|
|
wopts.disableWAL = true;
|
|
|
|
std::vector<int> cf_ids;
|
|
|
|
for (size_t i = 0; i != num_cfs; ++i) {
|
|
|
|
int cf_id = static_cast<int>(i);
|
|
|
|
ASSERT_OK(Put(cf_id, "key", "value", wopts));
|
|
|
|
cf_ids.push_back(cf_id);
|
|
|
|
}
|
|
|
|
ASSERT_OK(dbfull()->DropColumnFamily(handles_[1]));
|
|
|
|
ASSERT_TRUE(Flush(cf_ids).IsColumnFamilyDropped());
|
|
|
|
Destroy(options);
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_P(DBAtomicFlushTest,
|
|
|
|
FlushMultipleCFs_DropSomeAfterScheduleFlushBeforeFlushJobRun) {
|
|
|
|
bool atomic_flush = GetParam();
|
|
|
|
if (!atomic_flush) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.atomic_flush = atomic_flush;
|
|
|
|
|
|
|
|
CreateAndReopenWithCF({"pikachu", "eevee"}, options);
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
|
|
SyncPoint::GetInstance()->LoadDependency(
|
|
|
|
{{"DBImpl::AtomicFlushMemTables:AfterScheduleFlush",
|
|
|
|
"DBAtomicFlushTest::BeforeDropCF"},
|
|
|
|
{"DBAtomicFlushTest::AfterDropCF",
|
|
|
|
"DBImpl::BackgroundCallFlush:start"}});
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
size_t num_cfs = handles_.size();
|
|
|
|
ASSERT_EQ(3, num_cfs);
|
|
|
|
WriteOptions wopts;
|
|
|
|
wopts.disableWAL = true;
|
|
|
|
for (size_t i = 0; i != num_cfs; ++i) {
|
|
|
|
int cf_id = static_cast<int>(i);
|
|
|
|
ASSERT_OK(Put(cf_id, "key", "value", wopts));
|
|
|
|
}
|
|
|
|
port::Thread user_thread([&]() {
|
|
|
|
TEST_SYNC_POINT("DBAtomicFlushTest::BeforeDropCF");
|
|
|
|
ASSERT_OK(dbfull()->DropColumnFamily(handles_[1]));
|
|
|
|
TEST_SYNC_POINT("DBAtomicFlushTest::AfterDropCF");
|
|
|
|
});
|
|
|
|
FlushOptions flush_opts;
|
|
|
|
flush_opts.wait = true;
|
|
|
|
ASSERT_OK(dbfull()->Flush(flush_opts, handles_));
|
|
|
|
user_thread.join();
|
|
|
|
for (size_t i = 0; i != num_cfs; ++i) {
|
|
|
|
int cf_id = static_cast<int>(i);
|
|
|
|
ASSERT_EQ("value", Get(cf_id, "key"));
|
|
|
|
}
|
|
|
|
|
|
|
|
ReopenWithColumnFamilies({kDefaultColumnFamilyName, "eevee"}, options);
|
|
|
|
num_cfs = handles_.size();
|
|
|
|
ASSERT_EQ(2, num_cfs);
|
|
|
|
for (size_t i = 0; i != num_cfs; ++i) {
|
|
|
|
int cf_id = static_cast<int>(i);
|
|
|
|
ASSERT_EQ("value", Get(cf_id, "key"));
|
|
|
|
}
|
|
|
|
Destroy(options);
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_P(DBAtomicFlushTest, TriggerFlushAndClose) {
|
|
|
|
bool atomic_flush = GetParam();
|
|
|
|
if (!atomic_flush) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
const int kNumKeysTriggerFlush = 4;
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.atomic_flush = atomic_flush;
|
|
|
|
options.memtable_factory.reset(
|
|
|
|
test::NewSpecialSkipListFactory(kNumKeysTriggerFlush));
|
|
|
|
CreateAndReopenWithCF({"pikachu"}, options);
|
|
|
|
|
|
|
|
for (int i = 0; i != kNumKeysTriggerFlush; ++i) {
|
|
|
|
ASSERT_OK(Put(0, "key" + std::to_string(i), "value" + std::to_string(i)));
|
|
|
|
}
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
ASSERT_OK(Put(0, "key", "value"));
|
|
|
|
Close();
|
|
|
|
|
|
|
|
ReopenWithColumnFamilies({kDefaultColumnFamilyName, "pikachu"}, options);
|
|
|
|
ASSERT_EQ("value", Get(0, "key"));
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_P(DBAtomicFlushTest, PickMemtablesRaceWithBackgroundFlush) {
|
|
|
|
bool atomic_flush = GetParam();
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.atomic_flush = atomic_flush;
|
|
|
|
options.max_write_buffer_number = 4;
|
|
|
|
// Set min_write_buffer_number_to_merge to be greater than 1, so that
|
|
|
|
// a column family with one memtable in the imm will not cause IsFlushPending
|
|
|
|
// to return true when flush_requested_ is false.
|
|
|
|
options.min_write_buffer_number_to_merge = 2;
|
|
|
|
CreateAndReopenWithCF({"pikachu"}, options);
|
|
|
|
ASSERT_EQ(2, handles_.size());
|
|
|
|
ASSERT_OK(dbfull()->PauseBackgroundWork());
|
|
|
|
ASSERT_OK(Put(0, "key00", "value00"));
|
|
|
|
ASSERT_OK(Put(1, "key10", "value10"));
|
|
|
|
FlushOptions flush_opts;
|
|
|
|
flush_opts.wait = false;
|
|
|
|
ASSERT_OK(dbfull()->Flush(flush_opts, handles_));
|
|
|
|
ASSERT_OK(Put(0, "key01", "value01"));
|
|
|
|
// Since max_write_buffer_number is 4, the following flush won't cause write
|
|
|
|
// stall.
|
|
|
|
ASSERT_OK(dbfull()->Flush(flush_opts));
|
|
|
|
ASSERT_OK(dbfull()->DropColumnFamily(handles_[1]));
|
|
|
|
ASSERT_OK(dbfull()->DestroyColumnFamilyHandle(handles_[1]));
|
|
|
|
handles_[1] = nullptr;
|
|
|
|
ASSERT_OK(dbfull()->ContinueBackgroundWork());
|
|
|
|
ASSERT_OK(dbfull()->TEST_WaitForFlushMemTable(handles_[0]));
|
|
|
|
delete handles_[0];
|
|
|
|
handles_.clear();
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_P(DBAtomicFlushTest, CFDropRaceWithWaitForFlushMemTables) {
|
|
|
|
bool atomic_flush = GetParam();
|
|
|
|
if (!atomic_flush) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.atomic_flush = atomic_flush;
|
|
|
|
CreateAndReopenWithCF({"pikachu"}, options);
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->LoadDependency(
|
|
|
|
{{"DBImpl::AtomicFlushMemTables:AfterScheduleFlush",
|
|
|
|
"DBAtomicFlushTest::CFDropRaceWithWaitForFlushMemTables:BeforeDrop"},
|
|
|
|
{"DBAtomicFlushTest::CFDropRaceWithWaitForFlushMemTables:AfterFree",
|
|
|
|
"DBImpl::BackgroundCallFlush:start"},
|
|
|
|
{"DBImpl::BackgroundCallFlush:start",
|
|
|
|
"DBImpl::AtomicFlushMemTables:BeforeWaitForBgFlush"}});
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
ASSERT_EQ(2, handles_.size());
|
|
|
|
ASSERT_OK(Put(0, "key", "value"));
|
|
|
|
ASSERT_OK(Put(1, "key", "value"));
|
|
|
|
auto* cfd_default =
|
|
|
|
static_cast<ColumnFamilyHandleImpl*>(dbfull()->DefaultColumnFamily())
|
|
|
|
->cfd();
|
|
|
|
auto* cfd_pikachu = static_cast<ColumnFamilyHandleImpl*>(handles_[1])->cfd();
|
|
|
|
port::Thread drop_cf_thr([&]() {
|
|
|
|
TEST_SYNC_POINT(
|
|
|
|
"DBAtomicFlushTest::CFDropRaceWithWaitForFlushMemTables:BeforeDrop");
|
|
|
|
ASSERT_OK(dbfull()->DropColumnFamily(handles_[1]));
|
|
|
|
delete handles_[1];
|
|
|
|
handles_.resize(1);
|
|
|
|
TEST_SYNC_POINT(
|
|
|
|
"DBAtomicFlushTest::CFDropRaceWithWaitForFlushMemTables:AfterFree");
|
|
|
|
});
|
|
|
|
FlushOptions flush_opts;
|
|
|
|
flush_opts.allow_write_stall = true;
|
|
|
|
ASSERT_OK(dbfull()->TEST_AtomicFlushMemTables({cfd_default, cfd_pikachu},
|
|
|
|
flush_opts));
|
|
|
|
drop_cf_thr.join();
|
|
|
|
Close();
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_P(DBAtomicFlushTest, RollbackAfterFailToInstallResults) {
|
|
|
|
bool atomic_flush = GetParam();
|
|
|
|
if (!atomic_flush) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
auto fault_injection_env = std::make_shared<FaultInjectionTestEnv>(env_);
|
|
|
|
Options options = CurrentOptions();
|
|
|
|
options.env = fault_injection_env.get();
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.atomic_flush = atomic_flush;
|
|
|
|
CreateAndReopenWithCF({"pikachu"}, options);
|
|
|
|
ASSERT_EQ(2, handles_.size());
|
|
|
|
for (size_t cf = 0; cf < handles_.size(); ++cf) {
|
|
|
|
ASSERT_OK(Put(static_cast<int>(cf), "a", "value"));
|
|
|
|
}
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"VersionSet::ProcessManifestWrites:BeforeWriteLastVersionEdit:0",
|
|
|
|
[&](void* /*arg*/) { fault_injection_env->SetFilesystemActive(false); });
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
FlushOptions flush_opts;
|
|
|
|
Status s = db_->Flush(flush_opts, handles_);
|
|
|
|
ASSERT_NOK(s);
|
|
|
|
fault_injection_env->SetFilesystemActive(true);
|
|
|
|
Close();
|
|
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
|
|
}
|
|
|
|
|
Fix atomic flush waiting forever for MANIFEST write (#9034)
Summary:
In atomic flush, concurrent background flush threads will commit to the MANIFEST
one by one, in the order of the IDs of their picked memtables for all included column
families. Each time, a background flush thread decides whether to wait based on two
criteria:
- Is db stopped? If so, don't wait.
- Am I the one to commit the currently earliest memtable? If so, don't wait and ready to go.
When atomic flush was implemented, error writing to or syncing the MANIFEST would
cause the db to be stopped. Therefore, this background thread does not have to check
for the background error while waiting. If there has been such an error, `DBStopped()`
would have been true, and this thread will **not** wait forever.
After we improved error handling, RocksDB may map an IOError while writing to MANIFEST
to a soft error, if there is no WAL. This requires the background threads to check for
background error while waiting. Otherwise, a background flush thread may wait forever.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9034
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D31639225
Pulled By: riversand963
fbshipit-source-id: e9ab07c4d8f2eade238adeefe3e42dd9a5a3ebbd
3 years ago
|
|
|
// In atomic flush, concurrent bg flush threads commit to the MANIFEST in
|
|
|
|
// serial, in the order of their picked memtables for each column family.
|
|
|
|
// Only when a bg flush thread finds out that its memtables are the earliest
|
|
|
|
// unflushed ones for all the included column families will this bg flush
|
|
|
|
// thread continue to commit to MANIFEST.
|
|
|
|
// This unit test uses sync point to coordinate the execution of two bg threads
|
|
|
|
// executing the same sequence of functions. The interleaving are as follows.
|
|
|
|
// time bg1 bg2
|
|
|
|
// | pick memtables to flush
|
|
|
|
// | flush memtables cf1_m1, cf2_m1
|
|
|
|
// | join MANIFEST write queue
|
|
|
|
// | pick memtabls to flush
|
|
|
|
// | flush memtables cf1_(m1+1)
|
|
|
|
// | join MANIFEST write queue
|
|
|
|
// | wait to write MANIFEST
|
|
|
|
// | write MANIFEST
|
|
|
|
// | IO error
|
|
|
|
// | detect IO error and stop waiting
|
|
|
|
// V
|
|
|
|
TEST_P(DBAtomicFlushTest, BgThreadNoWaitAfterManifestError) {
|
|
|
|
bool atomic_flush = GetParam();
|
|
|
|
if (!atomic_flush) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
auto fault_injection_env = std::make_shared<FaultInjectionTestEnv>(env_);
|
|
|
|
Options options = GetDefaultOptions();
|
|
|
|
options.create_if_missing = true;
|
|
|
|
options.atomic_flush = true;
|
|
|
|
options.env = fault_injection_env.get();
|
|
|
|
// Set a larger value than default so that RocksDB can schedule concurrent
|
|
|
|
// background flush threads.
|
|
|
|
options.max_background_jobs = 8;
|
|
|
|
options.max_write_buffer_number = 8;
|
|
|
|
CreateAndReopenWithCF({"pikachu"}, options);
|
|
|
|
|
|
|
|
assert(2 == handles_.size());
|
|
|
|
|
|
|
|
WriteOptions write_opts;
|
|
|
|
write_opts.disableWAL = true;
|
|
|
|
|
|
|
|
ASSERT_OK(Put(0, "a", "v_0_a", write_opts));
|
|
|
|
ASSERT_OK(Put(1, "a", "v_1_a", write_opts));
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->LoadDependency({
|
|
|
|
{"BgFlushThr2:WaitToCommit", "BgFlushThr1:BeforeWriteManifest"},
|
|
|
|
});
|
|
|
|
|
|
|
|
std::thread::id bg_flush_thr1, bg_flush_thr2;
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"DBImpl::BackgroundCallFlush:start", [&](void*) {
|
|
|
|
if (bg_flush_thr1 == std::thread::id()) {
|
|
|
|
bg_flush_thr1 = std::this_thread::get_id();
|
|
|
|
} else if (bg_flush_thr2 == std::thread::id()) {
|
|
|
|
bg_flush_thr2 = std::this_thread::get_id();
|
|
|
|
}
|
|
|
|
});
|
|
|
|
|
|
|
|
int called = 0;
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"DBImpl::AtomicFlushMemTablesToOutputFiles:WaitToCommit", [&](void* arg) {
|
|
|
|
if (std::this_thread::get_id() == bg_flush_thr2) {
|
|
|
|
const auto* ptr = reinterpret_cast<std::pair<Status, bool>*>(arg);
|
|
|
|
assert(ptr);
|
|
|
|
if (0 == called) {
|
|
|
|
// When bg flush thread 2 reaches here for the first time.
|
|
|
|
ASSERT_OK(ptr->first);
|
|
|
|
ASSERT_TRUE(ptr->second);
|
|
|
|
} else if (1 == called) {
|
|
|
|
// When bg flush thread 2 reaches here for the second time.
|
|
|
|
ASSERT_TRUE(ptr->first.IsIOError());
|
|
|
|
ASSERT_FALSE(ptr->second);
|
|
|
|
}
|
|
|
|
++called;
|
|
|
|
TEST_SYNC_POINT("BgFlushThr2:WaitToCommit");
|
|
|
|
}
|
|
|
|
});
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"VersionSet::ProcessManifestWrites:BeforeWriteLastVersionEdit:0",
|
|
|
|
[&](void*) {
|
|
|
|
if (std::this_thread::get_id() == bg_flush_thr1) {
|
|
|
|
TEST_SYNC_POINT("BgFlushThr1:BeforeWriteManifest");
|
|
|
|
}
|
|
|
|
});
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"VersionSet::LogAndApply:WriteManifest", [&](void*) {
|
|
|
|
if (std::this_thread::get_id() != bg_flush_thr1) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
ASSERT_OK(db_->Put(write_opts, "b", "v_1_b"));
|
|
|
|
|
|
|
|
FlushOptions flush_opts;
|
|
|
|
flush_opts.wait = false;
|
|
|
|
std::vector<ColumnFamilyHandle*> cfhs(1, db_->DefaultColumnFamily());
|
|
|
|
ASSERT_OK(dbfull()->Flush(flush_opts, cfhs));
|
|
|
|
});
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"VersionSet::ProcessManifestWrites:AfterSyncManifest", [&](void* arg) {
|
|
|
|
auto* ptr = reinterpret_cast<IOStatus*>(arg);
|
|
|
|
assert(ptr);
|
|
|
|
*ptr = IOStatus::IOError("Injected failure");
|
|
|
|
});
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
ASSERT_TRUE(dbfull()->Flush(FlushOptions(), handles_).IsIOError());
|
|
|
|
|
|
|
|
Close();
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
|
|
}
|
|
|
|
|
|
|
|
INSTANTIATE_TEST_CASE_P(DBFlushDirectIOTest, DBFlushDirectIOTest,
|
|
|
|
testing::Bool());
|
|
|
|
|
|
|
|
INSTANTIATE_TEST_CASE_P(DBAtomicFlushTest, DBAtomicFlushTest, testing::Bool());
|
|
|
|
|
|
|
|
} // namespace ROCKSDB_NAMESPACE
|
Fix flush not being commit while writing manifest
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
8 years ago
|
|
|
|
|
|
|
int main(int argc, char** argv) {
|
|
|
|
ROCKSDB_NAMESPACE::port::InstallStackTraceHandler();
|
Fix flush not being commit while writing manifest
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
8 years ago
|
|
|
::testing::InitGoogleTest(&argc, argv);
|
|
|
|
return RUN_ALL_TESTS();
|
|
|
|
}
|