382 Commits (oxigraph-main)

Author	SHA1	Message	Date
Yu Zhang	11ebddb1d4	Add utils to use for handling user defined timestamp size record in WAL (#11451) ... Summary: Add a util method `HandleWriteBatchTimestampSizeDifference` to handle a `WriteBatch` read from WAL log when user-defined timestamp size record is written and read. Two check modes are added: `kVerifyConsistency` that just verifies the recorded timestamp size are consistent with the running ones. This mode is to be used by `db_impl_secondary` for opening a DB as secondary instance. It will also be used by `db_impl_open` before the user comparator switch support is added to make a column switch between enabling/disable UDT feature. The other mode `kReconcileInconsistency` will be used by `db_impl_open` later when user comparator can be changed. Another change is to extract a method `CollectColumnFamilyIdsFromWriteBatch` in db_secondary_impl.h into its standalone util file so it can be shared. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11451 Test Plan: ``` make check ./udt_util_test ``` Reviewed By: ltamasi Differential Revision: D45894386 Pulled By: jowlyzhang fbshipit-source-id: b96790777f154cddab6d45d9ba2e5d20ebc6fe9d	2 years ago
mayue.fight	8d8eb0e77e	Support Clip DB to KeyRange (#11379) ... Summary: This PR is part of the request https://github.com/facebook/rocksdb/issues/11317. (Another part is https://github.com/facebook/rocksdb/pull/11378) ClipDB() will clip the entries in the CF according to the range [begin_key, end_key). All the entries outside this range will be completely deleted (including tombstones). This feature is mainly used to ensure that there is no overlapping Key when calling CreateColumnFamilyWithImports() to import multiple CFs. When Calling ClipDB [begin, end), there are the following steps 1. Quickly and directly delete files without overlap DeleteFilesInRanges(nullptr, begin) + DeleteFilesInRanges(end, nullptr) 2. Delete the Key outside the range Delete[smallest_key, begin) + Delete[end, largest_key] 3. Delete the tombstone through Manul Compact CompactRange(option, nullptr, nullptr) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11379 Reviewed By: ajkr Differential Revision: D45840358 Pulled By: cbi42 fbshipit-source-id: 54152e8a45fd8ede137f99787eb252f0b51440a4	2 years ago
Hui Xiao	7263f51d50	Improve comment of ExpectedValue in db stress (#11456) ... Summary: **Context/Summary:** https://github.com/facebook/rocksdb/pull/11424 made me realize there are a couple gaps in my `ExpectedValue` comments so I updated them, along with separating `ExpectedValue` into separate files so it's clearer that `ExpectedValue` can be used without updating `ExpectedState` (e.g, TestMultiGet() where we care about value base of expected value but not updating the ExpectedState). Pull Request resolved: https://github.com/facebook/rocksdb/pull/11456 Test Plan: CI Reviewed By: jowlyzhang Differential Revision: D45965070 Pulled By: hx235 fbshipit-source-id: dcee690c13b00a3119757ea9d43b646f9644e1a9	2 years ago
Hui Xiao	cb58477185	New stat rocksdb.{cf|db}-write-stall-stats exposed in a structural way (#11300) ... Summary: **Context/Summary:** Users are interested in figuring out what has caused write stall. - Refactor write stall related stats from property `kCFStats` into its own db property `rocksdb.cf-write-stall-stats` as a map or string. For now, this only contains count of different combination of (CF-scope `WriteStallCause`) + (`WriteStallCondition`) - Add new `WriteStallCause::kWriteBufferManagerLimit` to reflect write stall caused by write buffer manager - Add new `rocksdb.db-write-stall-stats`. For now, this only contains `WriteStallCause::kWriteBufferManagerLimit` + `WriteStallCondition::kStopped` - Expose functions in new class `WriteStallStatsMapKeys` for examining the above two properties returned as map - Misc: rename/comment some write stall InternalStats for clarity Pull Request resolved: https://github.com/facebook/rocksdb/pull/11300 Test Plan: - New UT - Stress test `python3 tools/db_crashtest.py blackbox --simple --get_property_one_in=1` - Perf test: Both converge very slowly at similar rates but post-change has higher average ops/sec than pre-change even though they are run at the same time. ``` ./db_bench -seed=1679014417652004 -db=/dev/shm/testdb/ -statistics=false -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=100000 -db_write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 ``` pre-change: ``` fillseq [AVG 15 runs] : 1176 (± 732) ops/sec; 0.6 (± 0.4) MB/sec fillseq : 1052.671 micros/op 949 ops/sec 105.267 seconds 100000 operations; 0.5 MB/s fillseq [AVG 16 runs] : 1162 (± 685) ops/sec; 0.6 (± 0.4) MB/sec fillseq : 1387.330 micros/op 720 ops/sec 138.733 seconds 100000 operations; 0.4 MB/s fillseq [AVG 17 runs] : 1136 (± 646) ops/sec; 0.6 (± 0.3) MB/sec fillseq : 1232.011 micros/op 811 ops/sec 123.201 seconds 100000 operations; 0.4 MB/s fillseq [AVG 18 runs] : 1118 (± 610) ops/sec; 0.6 (± 0.3) MB/sec fillseq : 1282.567 micros/op 779 ops/sec 128.257 seconds 100000 operations; 0.4 MB/s fillseq [AVG 19 runs] : 1100 (± 578) ops/sec; 0.6 (± 0.3) MB/sec fillseq : 1914.336 micros/op 522 ops/sec 191.434 seconds 100000 operations; 0.3 MB/s fillseq [AVG 20 runs] : 1071 (± 551) ops/sec; 0.6 (± 0.3) MB/sec fillseq : 1227.510 micros/op 814 ops/sec 122.751 seconds 100000 operations; 0.4 MB/s fillseq [AVG 21 runs] : 1059 (± 525) ops/sec; 0.5 (± 0.3) MB/sec ``` post-change: ``` fillseq [AVG 15 runs] : 1226 (± 732) ops/sec; 0.6 (± 0.4) MB/sec fillseq : 1323.825 micros/op 755 ops/sec 132.383 seconds 100000 operations; 0.4 MB/s fillseq [AVG 16 runs] : 1196 (± 687) ops/sec; 0.6 (± 0.4) MB/sec fillseq : 1223.905 micros/op 817 ops/sec 122.391 seconds 100000 operations; 0.4 MB/s fillseq [AVG 17 runs] : 1174 (± 647) ops/sec; 0.6 (± 0.3) MB/sec fillseq : 1168.996 micros/op 855 ops/sec 116.900 seconds 100000 operations; 0.4 MB/s fillseq [AVG 18 runs] : 1156 (± 611) ops/sec; 0.6 (± 0.3) MB/sec fillseq : 1348.729 micros/op 741 ops/sec 134.873 seconds 100000 operations; 0.4 MB/s fillseq [AVG 19 runs] : 1134 (± 579) ops/sec; 0.6 (± 0.3) MB/sec fillseq : 1196.887 micros/op 835 ops/sec 119.689 seconds 100000 operations; 0.4 MB/s fillseq [AVG 20 runs] : 1119 (± 550) ops/sec; 0.6 (± 0.3) MB/sec fillseq : 1193.697 micros/op 837 ops/sec 119.370 seconds 100000 operations; 0.4 MB/s fillseq [AVG 21 runs] : 1106 (± 524) ops/sec; 0.6 (± 0.3) MB/sec ``` Reviewed By: ajkr Differential Revision: D44159541 Pulled By: hx235 fbshipit-source-id: 8d29efb70001fdc52d34535eeb3364fc3e71e40b	2 years ago
Peter Dillinger	204fcff751	HyperClockCache support for SecondaryCache, with refactoring (#11301) ... Summary: Internally refactors SecondaryCache integration out of LRUCache specifically and into a wrapper/adapter class that works with various Cache implementations. Notably, this relies on separating the notion of async lookup handles from other cache handles, so that HyperClockCache doesn't have to deal with the problem of allocating handles from the hash table for lookups that might fail anyway, and might be on the same key without support for coalescing. (LRUCache's hash table can incorporate previously allocated handles thanks to its pointer indirection.) Specifically, I'm worried about the case in which hundreds of threads try to access the same block and probing in the hash table degrades to linear search on the pile of entries with the same key. This change is a big step in the direction of supporting stacked SecondaryCaches, but there are obstacles to completing that. Especially, there is no SecondaryCache hook for evictions to pass from one to the next. It has been proposed that evictions be transmitted simply as the persisted data (as in SaveToCallback), but given the current structure provided by the CacheItemHelpers, that would require an extra copy of the block data, because there's intentionally no way to ask for a contiguous Slice of the data (to allow for flexibility in storage). `AsyncLookupHandle` and the re-worked `WaitAll()` should be essentially prepared for stacked SecondaryCaches, but several "TODO with stacked secondaries" issues remain in various places. It could be argued that the stacking instead be done as a SecondaryCache adapter that wraps two (or more) SecondaryCaches, but at least with the current API that would require an extra heap allocation on SecondaryCache Lookup for a wrapper SecondaryCacheResultHandle that can transfer a Lookup between secondaries. We could also consider trying to unify the Cache and SecondaryCache APIs, though that might be difficult if `AsyncLookupHandle` is kept a fixed struct. ## cache.h (public API) Moves `secondary_cache` option from LRUCacheOptions to ShardedCacheOptions so that it is applicable to HyperClockCache. ## advanced_cache.h (advanced public API) * Add `Cache::CreateStandalone()` so that the SecondaryCache support wrapper can use it. * Add `SetEvictionCallback()` / `eviction_callback_` so that the SecondaryCache support wrapper can use it. Only a single callback is supported for efficiency. If there is ever a need for more than one, hopefully that can be handled with a broadcast callback wrapper. These are essentially the two "extra" pieces of `Cache` for pulling out specific SecondaryCache support from the `Cache` implementation. I think it's a good trade-off as these are reasonable, limited, and reusable "cut points" into the `Cache` implementations. * Remove async capability from standard `Lookup()` (getting rid of awkward restrictions on pending Handles) and add `AsyncLookupHandle` and `StartAsyncLookup()`. As noted in the comments, the full struct of `AsyncLookupHandle` is exposed so that it can be stack allocated, for efficiency, though more data is being copied around than before, which could impact performance. (Lookup info -> AsyncLookupHandle -> Handle vs. Lookup info -> Handle) I could foresee a future in which a Cache internally saves a pointer to the AsyncLookupHandle, which means it's dangerous to allow it to be copyable or even movable. It also means it's not compatible with std::vector (which I don't like requiring as an API parameter anyway), so `WaitAll()` expects any contiguous array of AsyncLookupHandles. I believe this is best for common case efficiency, while behaving well in other cases also. For example, `WaitAll()` has no effect on default-constructed AsyncLookupHandles, which look like a completed cache miss. ## cacheable_entry.h A couple of functions are obsolete because Cache::Handle can no longer be pending. ## cache.cc Provides default implementations for new or revamped Cache functions, especially appropriate for non-blocking caches. ## secondary_cache_adapter.{h,cc} The full details of the Cache wrapper adding SecondaryCache support. Essentially replicates the SecondaryCache handling that was in LRUCache, but obviously refactored. There is a bit of logic duplication, where Lookup() is essentially a manually optimized version of StartAsyncLookup() and Wait(), but it's roughly a dozen lines of code. ## sharded_cache.h, typed_cache.h, charged_cache.{h,cc}, sim_cache.cc Simply updated for Cache API changes. ## lru_cache.{h,cc} Carefully remove SecondaryCache logic, implement `CreateStandalone` and eviction handler functionality. ## clock_cache.{h,cc} Expose existing `CreateStandalone` functionality, add eviction handler functionality. Light refactoring. ## block_based_table_reader* Mostly re-worked the only usage of async Lookup, which is in BlockBasedTable::MultiGet. Used arrays in place of autovector in some places for efficiency. Simplified some logic by not trying to process some cache results before they're all ready. Created new function `BlockBasedTable::GetCachePriority()` to reduce some pre-existing code duplication (and avoid making it worse). Fixed at least one small bug from the prior confusing mixture of async and sync Lookups. In MaybeReadBlockAndLoadToCache(), called by RetrieveBlock(), called by MultiGet() with wait=false, is_cache_hit for the block_cache_tracer entry would not be set to true if the handle was pending after Lookup and before Wait. ## Intended follow-up work * Figure out if there are any missing stats or block_cache_tracer work in refactored BlockBasedTable::MultiGet * Stacked secondary caches (see above discussion) * See if we can make up for the small MultiGet performance regression. * Study more performance with SecondaryCache * Items evicted from over-full LRUCache in Release were not being demoted to SecondaryCache, and still aren't to minimize unit test churn. Ideally they would be demoted, but it's an exceptional case so not a big deal. * Use CreateStandalone for cache reservations (save unnecessary hash table operations). Not a big deal, but worthy cleanup. * Somehow I got the contract for SecondaryCache::Insert wrong in #10945. (Doesn't take ownership!) That API comment needs to be fixed, but didn't want to mingle that in here. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11301 Test Plan: ## Unit tests Generally updated to include HCC in SecondaryCache tests, though HyperClockCache has some different, less strict behaviors that leads to some tests not really being set up to work with it. Some of the tests remain disabled with it, but I think we have good coverage without them. ## Crash/stress test Updated to use the new combination. ## Performance First, let's check for regression on caches without secondary cache configured. Adding support for the eviction callback is likely to have a tiny effect, but it shouldn't be worrisome. LRUCache could benefit slightly from less logic around SecondaryCache handling. We can test with cache_bench default settings, built with DEBUG_LEVEL=0 and PORTABLE=0. ``` (while :; do base/cache_bench --cache_type=hyper_clock_cache | grep Rough; done) | awk '{ sum += $9; count++; print $0; print "Average: " int(sum / count) }' ``` **Before** this and #11299 (which could also have a small effect), running for about an hour, before & after running concurrently for each cache type: HyperClockCache: 3168662 (average parallel ops/sec) LRUCache: 2940127 **After** this and #11299, running for about an hour: HyperClockCache: 3164862 (average parallel ops/sec) (0.12% slower) LRUCache: 2940928 (0.03% faster) This is an acceptable difference IMHO. Next, let's consider essentially the worst case of new CPU overhead affecting overall performance. MultiGet uses the async lookup interface regardless of whether SecondaryCache or folly are used. We can configure a benchmark where all block cache queries are for data blocks, and all are hits. Create DB and test (before and after tests running simultaneously): ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16 TEST_TMPDIR=/dev/shm base/db_bench -benchmarks=multireadrandom[-X30] -readonly -multiread_batched -batch_size=32 -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16 ``` **Before**: multireadrandom [AVG 30 runs] : 3444202 (± 57049) ops/sec; 240.9 (± 4.0) MB/sec multireadrandom [MEDIAN 30 runs] : 3514443 ops/sec; 245.8 MB/sec **After**: multireadrandom [AVG 30 runs] : 3291022 (± 58851) ops/sec; 230.2 (± 4.1) MB/sec multireadrandom [MEDIAN 30 runs] : 3366179 ops/sec; 235.4 MB/sec So that's roughly a 3% regression, on kind of a *worst case* test of MultiGet CPU. Similar story with HyperClockCache: **Before**: multireadrandom [AVG 30 runs] : 3933777 (± 41840) ops/sec; 275.1 (± 2.9) MB/sec multireadrandom [MEDIAN 30 runs] : 3970667 ops/sec; 277.7 MB/sec **After**: multireadrandom [AVG 30 runs] : 3755338 (± 30391) ops/sec; 262.6 (± 2.1) MB/sec multireadrandom [MEDIAN 30 runs] : 3785696 ops/sec; 264.8 MB/sec Roughly a 4-5% regression. Not ideal, but not the whole story, fortunately. Let's also look at Get() in db_bench: ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X30] -readonly -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16 ``` **Before**: readrandom [AVG 30 runs] : 2198685 (± 13412) ops/sec; 153.8 (± 0.9) MB/sec readrandom [MEDIAN 30 runs] : 2209498 ops/sec; 154.5 MB/sec **After**: readrandom [AVG 30 runs] : 2292814 (± 43508) ops/sec; 160.3 (± 3.0) MB/sec readrandom [MEDIAN 30 runs] : 2365181 ops/sec; 165.4 MB/sec That's showing roughly a 4% improvement, perhaps because of the secondary cache code that is no longer part of LRUCache. But weirdly, HyperClockCache is also showing 2-3% improvement: **Before**: readrandom [AVG 30 runs] : 2272333 (± 9992) ops/sec; 158.9 (± 0.7) MB/sec readrandom [MEDIAN 30 runs] : 2273239 ops/sec; 159.0 MB/sec **After**: readrandom [AVG 30 runs] : 2332407 (± 11252) ops/sec; 163.1 (± 0.8) MB/sec readrandom [MEDIAN 30 runs] : 2335329 ops/sec; 163.3 MB/sec Reviewed By: ltamasi Differential Revision: D44177044 Pulled By: pdillinger fbshipit-source-id: e808e48ff3fe2f792a79841ba617be98e48689f5	2 years ago
Peter Dillinger	ccaa3225b0	Simplify tracking entries already in SecondaryCache (#11299) ... Summary: In preparation for factoring secondary cache support out of individual Cache implementations, we can get rid of the "in secondary cache" flag on entries through a workable hack: when an entry is promoted from secondary, it is inserted in primary using a helper that lacks secondary cache support, thus preventing re-insertion into secondary cache through existing logic. This adds to the complexity of building CacheItemHelpers, because you always have to be able to get to an equivalent helper without secondary cache support, but that complexity is reasonably isolated within RocksDB typed_cache.h and test code. gcc-7 seems to have problems with constexpr constructor referencing `this` so removed constexpr support on CacheItemHelper. Also refactored some related test code to share common code / functionality. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11299 Test Plan: existing tests Reviewed By: anand1976 Differential Revision: D44101453 Pulled By: pdillinger fbshipit-source-id: 7a59d0a3938ee40159c90c3e65d7004f6a272345	2 years ago
Changyu Bi	229297d1b8	Refactor AddRangeDels() + consider range tombstone during compaction file cutting (#11113) ... Summary: A second attempt after https://github.com/facebook/rocksdb/issues/10802, with bug fixes and refactoring. This PR updates compaction logic to take range tombstones into account when determining whether to cut the current compaction output file (https://github.com/facebook/rocksdb/issues/4811). Before this change, only point keys were considered, and range tombstones could cause large compactions. For example, if the current compaction outputs is a range tombstone [a, b) and 2 point keys y, z, they would be added to the same file, and may overlap with too many files in the next level and cause a large compaction in the future. This PR also includes ajkr's effort to simplify the logic to add range tombstones to compaction output files in `AddRangeDels()` ([https://github.com/facebook/rocksdb/issues/11078](https://github.com/facebook/rocksdb/pull/11078#issuecomment-1386078861)). The main change is for `CompactionIterator` to emit range tombstone start keys to be processed by `CompactionOutputs`. A new class `CompactionMergingIterator` is introduced to replace `MergingIterator` under `CompactionIterator` to enable emitting of range tombstone start keys. Further improvement after this PR include cutting compaction output at some grandparent boundary key (instead of the next output key) when cutting within a range tombstone to reduce overlap with grandparents. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11113 Test Plan: * added unit test in db_range_del_test * crash test with a small key range: `python3 tools/db_crashtest.py blackbox --simple --max_key=100 --interval=600 --write_buffer_size=262144 --target_file_size_base=256 --max_bytes_for_level_base=262144 --block_size=128 --value_size_mult=33 --subcompactions=10 --use_multiget=1 --delpercent=3 --delrangepercent=2 --verify_iterator_with_expected_state_one_in=2 --num_iterations=10` Reviewed By: ajkr Differential Revision: D42655709 Pulled By: cbi42 fbshipit-source-id: 8367e36ef5640e8f21c14a3855d4a8d6e360a34c	2 years ago
Peter Dillinger	34bb3ddc43	Improve SmallEnumSet (#11178) ... Summary: In anticipation of using this to represent sets of CacheEntryRole for including or excluding kinds of blocks in block cache tiers, add significant new features to SmallEnumSet, including at least: * List initialization * Applicative constexpr operations * copy/move/equality ops * begin/end/const_iterator for iteration * Better comments Pull Request resolved: https://github.com/facebook/rocksdb/pull/11178 Test Plan: unit tests added/expanded Reviewed By: ltamasi Differential Revision: D42973723 Pulled By: pdillinger fbshipit-source-id: 40783486feda931c3f7c6fcc9a300acd6a4b0a0a	2 years ago
Changyu Bi	f515d9d203	Revert #10802 Consider range tombstone in compaction output file cutting (#11089) ... Summary: This reverts commit f02c708aa3 since it introduced several bugs (see https://github.com/facebook/rocksdb/issues/11078 and https://github.com/facebook/rocksdb/issues/11067 for attempts to fix them) and that I do not have a high confidence to fix all of them and ensure no further ones before the next release branch cut. There are also come existing issue found during bug fixing. We will work on it and try to merge it to the release after. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11089 Test Plan: existing CI. Reviewed By: ajkr Differential Revision: D42505972 Pulled By: cbi42 fbshipit-source-id: 2f66dcde6b85dc94977b317c2ce513872cfbc153	2 years ago
Peter Dillinger	9f7801c5f1	Major Cache refactoring, CPU efficiency improvement (#10975) ... Summary: This is several refactorings bundled into one to avoid having to incrementally re-modify uses of Cache several times. Overall, there are breaking changes to Cache class, and it becomes more of low-level interface for implementing caches, especially block cache. New internal APIs make using Cache cleaner than before, and more insulated from block cache evolution. Hopefully, this is the last really big block cache refactoring, because of rather effectively decoupling the implementations from the uses. This change also removes the EXPERIMENTAL designation on the SecondaryCache support in Cache. It seems reasonably mature at this point but still subject to change/evolution (as I warn in the API docs for Cache). The high-level motivation for this refactoring is to minimize code duplication / compounding complexity in adding SecondaryCache support to HyperClockCache (in a later PR). Other benefits listed below. * static_cast lines of code +29 -35 (net removed 6) * reinterpret_cast lines of code +6 -32 (net removed 26) ## cache.h and secondary_cache.h * Always use CacheItemHelper with entries instead of just a Deleter. There are several motivations / justifications: * Simpler for implementations to deal with just one Insert and one Lookup. * Simpler and more efficient implementation because we don't have to track which entries are using helpers and which are using deleters * Gets rid of hack to classify cache entries by their deleter. Instead, the CacheItemHelper includes a CacheEntryRole. This simplifies a lot of code (cache_entry_roles.h almost eliminated). Fixes https://github.com/facebook/rocksdb/issues/9428. * Makes it trivial to adjust SecondaryCache behavior based on kind of block (e.g. don't re-compress filter blocks). * It is arguably less convenient for many direct users of Cache, but direct users of Cache are now rare with introduction of typed_cache.h (below). * I considered and rejected an alternative approach in which we reduce customizability by assuming each secondary cache compatible value starts with a Slice referencing the uncompressed block contents (already true or mostly true), but we apparently intend to stack secondary caches. Saving an entry from a compressed secondary to a lower tier requires custom handling offered by SaveToCallback, etc. * Make CreateCallback part of the helper and introduce CreateContext to work with it (alternative to https://github.com/facebook/rocksdb/issues/10562). This cleans up the interface while still allowing context to be provided for loading/parsing values into primary cache. This model works for async lookup in BlockBasedTable reader (reader owns a CreateContext) under the assumption that it always waits on secondary cache operations to finish. (Otherwise, the CreateContext could be destroyed while async operation depending on it continues.) This likely contributes most to the observed performance improvement because it saves an std::function backed by a heap allocation. * Use char* for serialized data, e.g. in SaveToCallback, where void* was confusingly used. (We use `char*` for serialized byte data all over RocksDB, with many advantages over `void*`. `memcpy` etc. are legacy APIs that should not be mimicked.) * Add a type alias Cache::ObjectPtr = void*, so that we can better indicate the intent of the void* when it is to be the object associated with a Cache entry. Related: started (but did not complete) a refactoring to move away from "value" of a cache entry toward "object" or "obj". (It is confusing to call Cache a key-value store (like DB) when it is really storing arbitrary in-memory objects, not byte strings.) * Remove unnecessary key param from DeleterFn. This is good for efficiency in HyperClockCache, which does not directly store the cache key in memory. (Alternative to https://github.com/facebook/rocksdb/issues/10774) * Add allocator to Cache DeleterFn. This is a kind of future-proofing change in case we get more serious about using the Cache allocator for memory tracked by the Cache. Right now, only the uncompressed block contents are allocated using the allocator, and a pointer to that allocator is saved as part of the cached object so that the deleter can use it. (See CacheAllocationPtr.) If in the future we are able to "flatten out" our Cache objects some more, it would be good not to have to track the allocator as part of each object. * Removes legacy `ApplyToAllCacheEntries` and changes `ApplyToAllEntries` signature for Deleter->CacheItemHelper change. ## typed_cache.h Adds various "typed" interfaces to the Cache as internal APIs, so that most uses of Cache can use simple type safe code without casting and without explicit deleters, etc. Almost all of the non-test, non-glue code uses of Cache have been migrated. (Follow-up work: CompressedSecondaryCache deserves deeper attention to migrate.) This change expands RocksDB's internal usage of metaprogramming and SFINAE (https://en.cppreference.com/w/cpp/language/sfinae). The existing usages of Cache are divided up at a high level into these new interfaces. See updated existing uses of Cache for examples of how these are used. * PlaceholderCacheInterface - Used for making cache reservations, with entries that have a charge but no value. * BasicTypedCacheInterface<TValue> - Used for primary cache storage of objects of type TValue, which can be cleaned up with std::default_delete<TValue>. The role is provided by TValue::kCacheEntryRole or given in an optional template parameter. * FullTypedCacheInterface<TValue, TCreateContext> - Used for secondary cache compatible storage of objects of type TValue. In addition to BasicTypedCacheInterface constraints, we require TValue::ContentSlice() to return persistable data. This simplifies usage for the normal case of simple secondary cache compatibility (can give you a Slice to the data already in memory). In addition to TCreateContext performing the role of Cache::CreateContext, it is also expected to provide a factory function for creating TValue. * For each of these, there's a "Shared" version (e.g. FullTypedSharedCacheInterface) that holds a shared_ptr to the Cache, rather than assuming external ownership by holding only a raw `Cache*`. These interfaces introduce specific handle types for each interface instantiation, so that it's easy to see what kind of object is controlled by a handle. (Ultimately, this might not be worth the extra complexity, but it seems OK so far.) Note: I attempted to make the cache 'charge' automatically inferred from the cache object type, such as by expecting an ApproximateMemoryUsage() function, but this is not so clean because there are cases where we need to compute the charge ahead of time and don't want to re-compute it. ## block_cache.h This header is essentially the replacement for the old block_like_traits.h. It includes various things to support block cache access with typed_cache.h for block-based table. ## block_based_table_reader.cc Before this change, accessing the block cache here was an awkward mix of static polymorphism (template TBlocklike) and switch-case on a dynamic BlockType value. This change mostly unifies on static polymorphism, relying on minor hacks in block_cache.h to distinguish variants of Block. We still check BlockType in some places (especially for stats, which could be improved in follow-up work) but at least the BlockType is a static constant from the template parameter. (No more awkward partial redundancy between static and dynamic info.) This likely contributes to the overall performance improvement, but hasn't been tested in isolation. The other key source of simplification here is a more unified system of creating block cache objects: for directly populating from primary cache and for promotion from secondary cache. Both use BlockCreateContext, for context and for factory functions. ## block_based_table_builder.cc, cache_dump_load_impl.cc Before this change, warming caches was super ugly code. Both of these source files had switch statements to basically transition from the dynamic BlockType world to the static TBlocklike world. None of that mess is needed anymore as there's a new, untyped WarmInCache function that handles all the details just as promotion from SecondaryCache would. (Fixes `TODO akanksha: Dedup below code` in block_based_table_builder.cc.) ## Everything else Mostly just updating Cache users to use new typed APIs when reasonably possible, or changed Cache APIs when not. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10975 Test Plan: tests updated Performance test setup similar to https://github.com/facebook/rocksdb/issues/10626 (by cache size, LRUCache when not "hyper" for HyperClockCache): 34MB 1thread base.hyper -> kops/s: 0.745 io_bytes/op: 2.52504e+06 miss_ratio: 0.140906 max_rss_mb: 76.4844 34MB 1thread new.hyper -> kops/s: 0.751 io_bytes/op: 2.5123e+06 miss_ratio: 0.140161 max_rss_mb: 79.3594 34MB 1thread base -> kops/s: 0.254 io_bytes/op: 1.36073e+07 miss_ratio: 0.918818 max_rss_mb: 45.9297 34MB 1thread new -> kops/s: 0.252 io_bytes/op: 1.36157e+07 miss_ratio: 0.918999 max_rss_mb: 44.1523 34MB 32thread base.hyper -> kops/s: 7.272 io_bytes/op: 2.88323e+06 miss_ratio: 0.162532 max_rss_mb: 516.602 34MB 32thread new.hyper -> kops/s: 7.214 io_bytes/op: 2.99046e+06 miss_ratio: 0.168818 max_rss_mb: 518.293 34MB 32thread base -> kops/s: 3.528 io_bytes/op: 1.35722e+07 miss_ratio: 0.914691 max_rss_mb: 264.926 34MB 32thread new -> kops/s: 3.604 io_bytes/op: 1.35744e+07 miss_ratio: 0.915054 max_rss_mb: 264.488 233MB 1thread base.hyper -> kops/s: 53.909 io_bytes/op: 2552.35 miss_ratio: 0.0440566 max_rss_mb: 241.984 233MB 1thread new.hyper -> kops/s: 62.792 io_bytes/op: 2549.79 miss_ratio: 0.044043 max_rss_mb: 241.922 233MB 1thread base -> kops/s: 1.197 io_bytes/op: 2.75173e+06 miss_ratio: 0.103093 max_rss_mb: 241.559 233MB 1thread new -> kops/s: 1.199 io_bytes/op: 2.73723e+06 miss_ratio: 0.10305 max_rss_mb: 240.93 233MB 32thread base.hyper -> kops/s: 1298.69 io_bytes/op: 2539.12 miss_ratio: 0.0440307 max_rss_mb: 371.418 233MB 32thread new.hyper -> kops/s: 1421.35 io_bytes/op: 2538.75 miss_ratio: 0.0440307 max_rss_mb: 347.273 233MB 32thread base -> kops/s: 9.693 io_bytes/op: 2.77304e+06 miss_ratio: 0.103745 max_rss_mb: 569.691 233MB 32thread new -> kops/s: 9.75 io_bytes/op: 2.77559e+06 miss_ratio: 0.103798 max_rss_mb: 552.82 1597MB 1thread base.hyper -> kops/s: 58.607 io_bytes/op: 1449.14 miss_ratio: 0.0249324 max_rss_mb: 1583.55 1597MB 1thread new.hyper -> kops/s: 69.6 io_bytes/op: 1434.89 miss_ratio: 0.0247167 max_rss_mb: 1584.02 1597MB 1thread base -> kops/s: 60.478 io_bytes/op: 1421.28 miss_ratio: 0.024452 max_rss_mb: 1589.45 1597MB 1thread new -> kops/s: 63.973 io_bytes/op: 1416.07 miss_ratio: 0.0243766 max_rss_mb: 1589.24 1597MB 32thread base.hyper -> kops/s: 1436.2 io_bytes/op: 1357.93 miss_ratio: 0.0235353 max_rss_mb: 1692.92 1597MB 32thread new.hyper -> kops/s: 1605.03 io_bytes/op: 1358.04 miss_ratio: 0.023538 max_rss_mb: 1702.78 1597MB 32thread base -> kops/s: 280.059 io_bytes/op: 1350.34 miss_ratio: 0.023289 max_rss_mb: 1675.36 1597MB 32thread new -> kops/s: 283.125 io_bytes/op: 1351.05 miss_ratio: 0.0232797 max_rss_mb: 1703.83 Almost uniformly improving over base revision, especially for hot paths with HyperClockCache, up to 12% higher throughput seen (1597MB, 32thread, hyper). The improvement for that is likely coming from much simplified code for providing context for secondary cache promotion (CreateCallback/CreateContext), and possibly from less branching in block_based_table_reader. And likely a small improvement from not reconstituting key for DeleterFn. Reviewed By: anand1976 Differential Revision: D42417818 Pulled By: pdillinger fbshipit-source-id: f86bfdd584dce27c028b151ba56818ad14f7a432	2 years ago
Changyu Bi	f02c708aa3	Consider range tombstone in compaction output file cutting (#10802) ... Summary: This PR is the first step for Issue https://github.com/facebook/rocksdb/issues/4811. Currently compaction output files are cut at point keys, and the decision is made mainly in `CompactionOutputs::ShouldStopBefore()`. This makes it possible for range tombstones to cause large compactions that does not respect `max_compaction_bytes`. For example, we can have a large range tombstone that overlaps with too many files from the next level. Another example is when there is a gap between a range tombstone and another key. The first issue may be more acceptable, as a lot of data is deleted. This PR address the second issue by calling `ShouldStopBefore()` for range tombstone start keys. The main change is for `CompactionIterator` to emit range tombstone start keys to be processed by `CompactionOutputs`. A new `CompactionMergingIterator` is introduced and only used under `CompactionIterator` for this purpose. Further improvement after this PR include 1) cut compaction output at some grandparent boundary key instead of at the next point key or range tombstone start key and 2) cut compaction output file within a large range tombstone (it may be easier and reasonable to only do it for range tombstones at the end of a compaction output). Pull Request resolved: https://github.com/facebook/rocksdb/pull/10802 Test Plan: - added unit tests in db_range_del_test. - stress test: `python3 tools/db_crashtest.py whitebox --[simple|enable_ts] --verify_iterator_with_expected_state_one_in=5 --delrangepercent=5 --prefixpercent=2 --writepercent=58 --readpercen=21 --duration=36000 --range_deletion_width=1000000` Reviewed By: ajkr, jay-zhuang Differential Revision: D40308827 Pulled By: cbi42 fbshipit-source-id: a8fd6f70a3f09d0ef7a40e006f6c964bba8c00df	2 years ago
Peter Dillinger	e079d562af	Add a SecondaryCache::InsertSaved() API, use in CacheDumper impl (#10945) ... Summary: Can simplify some ugly code in cache_dump_load_impl.cc by having an API in SecondaryCache that can directly consume persisted data. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10945 Test Plan: existing tests for CacheDumper, added basic unit test Reviewed By: anand1976 Differential Revision: D41231497 Pulled By: pdillinger fbshipit-source-id: b8ec993ef7d3e7efd68aae8602fd3f858da58068	2 years ago
Peter Dillinger	32520df1d9	Remove prototype FastLRUCache (#10954) ... Summary: This was just a stepping stone to what eventually became HyperClockCache, and is now just more code to maintain. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10954 Test Plan: tests updated Reviewed By: akankshamahajan15 Differential Revision: D41310123 Pulled By: pdillinger fbshipit-source-id: 618ee148a1a0a29ee756ba8fe28359617b7cd67c	2 years ago
Peter Dillinger	8367f0d2d7	Improve / refactor anonymous mmap capabilities (#10810) ... Summary: The motivation for this change is a planned feature (related to HyperClockCache) that will depend on a large array that can essentially grow automatically, up to some bound, without the pointer address changing and with guaranteed zero-initialization of the data. Anonymous mmaps provide such functionality, and this change provides an internal API for that. The other existing use of anonymous mmap in RocksDB is for allocating in huge pages. That code and other related Arena code used some awkward non-RAII and pre-C++11 idioms, so I cleaned up much of that as well, with RAII, move semantics, constexpr, etc. More specifcs: * Minimize conditional compilation * Add Windows support for anonymous mmaps * Use std::deque instead of std::vector for more efficient bag Pull Request resolved: https://github.com/facebook/rocksdb/pull/10810 Test Plan: unit test added for new functionality Reviewed By: riversand963 Differential Revision: D40347204 Pulled By: pdillinger fbshipit-source-id: ca83fcc47e50fabf7595069380edd2954f4f879c	2 years ago
gitbw95	6cd8133035	Fix an import issue in fbcode. (#10604) ... Summary: This should fix an import issue detected in meta internal tests. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10604 Test Plan: Unit Tests. Reviewed By: hx235 Differential Revision: D39120414 Pulled By: gitbw95 fbshipit-source-id: dbd016d7f47b9f54aab5ea61e8d3cd79734f46af	2 years ago
Jay Zhuang	d9e71fb2c5	Fix periodic_task unable to re-register the same task type (#10379) ... Summary: Timer has a limitation that it cannot re-register a task with the same name, because the cancel only mark the task as invalid and wait for the Timer thread to clean it up later, before the task is cleaned up, the same task name cannot be added. Which makes the task option update likely to fail, which basically cancel and re-register the same task name. Change the periodic task name to a random unique id and store it in periodic_task_scheduler. Also refactor the `periodic_work` to `periodic_task` to make each job function as a `task`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10379 Test Plan: unittests Reviewed By: ajkr Differential Revision: D38000615 Pulled By: jay-zhuang fbshipit-source-id: e4135f9422e3b53aaec8eda54f4e18ce633a279e	2 years ago
Levi Tamasi	3f57d84af4	Introduce a dedicated class to represent blob values (#10571) ... Summary: The patch introduces a new class called `BlobContents`, which represents a single uncompressed blob value. We currently use `std::string` for this purpose; `BlobContents` is somewhat smaller but the primary reason for a dedicated class is that it enables certain improvements and optimizations like eliding a copy when inserting a blob into the cache, using custom allocators, or more control over and better accounting of the memory usage of cached blobs (see https://github.com/facebook/rocksdb/issues/10484). (We plan to implement these in subsequent PRs.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/10571 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D39000965 Pulled By: ltamasi fbshipit-source-id: f296eddf9dec4fc3e11cad525b462bdf63c78f96	2 years ago
Levi Tamasi	81388b36e0	Add support for wide-column point lookups (#10540) ... Summary: The patch adds a new API `GetEntity` that can be used to perform wide-column point lookups. It also extends the `Get` code path and the `MemTable` / `MemTableList` and `Version` / `GetContext` logic accordingly so that wide-column entities can be served from both memtables and SSTs. If the result of a lookup is a wide-column entity (`kTypeWideColumnEntity`), it is passed to the application in deserialized form; if it is a plain old key-value (`kTypeValue`), it is presented as a wide-column entity with a single default (anonymous) column. (In contrast, regular `Get` returns plain old key-values as-is, and returns the value of the default column for wide-column entities, see https://github.com/facebook/rocksdb/issues/10483 .) The result of `GetEntity` is a self-contained `PinnableWideColumns` object. `PinnableWideColumns` contains a `PinnableSlice`, which either stores the underlying data in its own buffer or holds on to a cache handle. It also contains a `WideColumns` instance, which indexes the contents of the `PinnableSlice`, so applications can access the values of columns efficiently. There are several pieces of functionality which are currently not supported for wide-column entities: there is currently no `MultiGetEntity` or wide-column iterator; also, `Merge` and `GetMergeOperands` are not supported, and there is no `GetEntity` implementation for read-only and secondary instances. We plan to implement these in future PRs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10540 Test Plan: `make check` Reviewed By: akankshamahajan15 Differential Revision: D38847474 Pulled By: ltamasi fbshipit-source-id: 42311a34ccdfe88b3775e847a5e2a5296e002b5b	2 years ago
Gang Liao	0b6bc101ba	Charge blob cache usage against the global memory limit (#10321) ... Summary: To help service owners to manage their memory budget effectively, we have been working towards counting all major memory users inside RocksDB towards a single global memory limit (see e.g. https://github.com/facebook/rocksdb/wiki/Write-Buffer-Manager#cost-memory-used-in-memtable-to-block-cache). The global limit is specified by the capacity of the block-based table's block cache, and is technically implemented by inserting dummy entries ("reservations") into the block cache. The goal of this task is to support charging the memory usage of the new blob cache against this global memory limit when the backing cache of the blob cache and the block cache are different. This PR is a part of https://github.com/facebook/rocksdb/issues/10156 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10321 Reviewed By: ltamasi Differential Revision: D37913590 Pulled By: gangliao fbshipit-source-id: eaacf23907f82dc7d18964a3f24d7039a2937a72	2 years ago
Jay Zhuang	a3acf2ef87	Add seqno to time mapping (#10338) ... Summary: Which will be used for tiered storage to preclude hot data from compacting to the cold tier (the last level). Internally, adding seqno to time mapping. A periodic_task is scheduled to record the current_seqno -> current_time in certain cadence. When memtable flush, the mapping informaiton is stored in sstable property. During compaction, the mapping information are merged and get the approximate time of sequence number, which is used to determine if a key is recently inserted or not and preclude it from the last level if it's recently inserted (within the `preclude_last_level_data_seconds`). Pull Request resolved: https://github.com/facebook/rocksdb/pull/10338 Test Plan: CI Reviewed By: siying Differential Revision: D37810187 Pulled By: jay-zhuang fbshipit-source-id: 6953be7a18a99de8b1cb3b162d712f79c2b4899f	2 years ago
Jay Zhuang	6ce0b2ca34	Tiered Compaction: per key placement support (#9964) ... Summary: Support per_key_placement for last level compaction, which will be used for tiered compaction. * compaction iterator reports which level a key should output to; * compaction get the output level information and check if it's safe to output the data to penultimate level; * all compaction output files will be installed. * extra internal compaction stats added for penultimate level. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9964 Test Plan: * Unittest * db_bench, no significate difference: https://gist.github.com/jay-zhuang/3645f8fb97ec0ab47c10704bb39fd6e4 * microbench manual compaction no significate difference: https://gist.github.com/jay-zhuang/ba679b3e89e24992615ee9eef310e6dd * run the db_stress multiple times (not covering the new feature) looks good (internal: https://fburl.com/sandcastle/9w84pp2m) Reviewed By: ajkr Differential Revision: D36249494 Pulled By: jay-zhuang fbshipit-source-id: a96da57c8031c1df83e4a7a8567b657a112b80a3	2 years ago
Levi Tamasi	c73d2a9d18	Add API for writing wide-column entities (#10242) ... Summary: The patch builds on https://github.com/facebook/rocksdb/pull/9915 and adds a new API called `PutEntity` that can be used to write a wide-column entity to the database. The new API is added to both `DB` and `WriteBatch`. Note that currently there is no way to retrieve these entities; more precisely, all read APIs (`Get`, `MultiGet`, and iterator) return `NotSupported` when they encounter a wide-column entity that is required to answer a query. Read-side support (as well as other missing functionality like `Merge`, compaction filter, and timestamp support) will be added in later PRs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10242 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D37369748 Pulled By: ltamasi fbshipit-source-id: 7f5e412359ed7a400fd80b897dae5599dbcd685d	3 years ago
Gang Liao	c965c9ef65	Read blob from blob cache if exists when GetBlob() (#10178) ... Summary: There is currently no caching mechanism for blobs, which is not ideal especially when the database resides on remote storage (where we cannot rely on the OS page cache). As part of this task, we would like to make it possible for the application to configure a blob cache. In this task, we added a new abstraction layer `BlobSource` to retrieve blobs from either blob cache or raw blob file. Note: For simplicity, the current PR only includes `GetBlob()`. `MultiGetBlob()` will be included in the next PR. This PR is a part of https://github.com/facebook/rocksdb/issues/10156 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10178 Reviewed By: ltamasi Differential Revision: D37250507 Pulled By: gangliao fbshipit-source-id: 3fc4a55a0cea955a3147bdc7dba06430e377259b	3 years ago
Peter Dillinger	1aac814578	Use optimized folly DistributedMutex in LRUCache when available (#10179) ... Summary: folly DistributedMutex is faster than standard mutexes though imposes some static obligations on usage. See https://github.com/facebook/folly/blob/main/folly/synchronization/DistributedMutex.h for details. Here we use this alternative for our Cache implementations (especially LRUCache) for better locking performance, when RocksDB is compiled with folly. Also added information about which distributed mutex implementation is being used to cache_bench output and to DB LOG. Intended follow-up: * Use DMutex in more places, perhaps improving API to support non-scoped locking * Fix linking with fbcode compiler (needs ROCKSDB_NO_FBCODE=1 currently) Credit: Thanks Siying for reminding me about this line of work that was previously left unfinished. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10179 Test Plan: for correctness, existing tests. CircleCI config updated. Also Meta-internal buck build updated. For performance, ran simultaneous before & after cache_bench. Out of three comparison runs, the middle improvement to ops/sec was +21%: Baseline: USE_CLANG=1 DEBUG_LEVEL=0 make -j24 cache_bench (fbcode compiler) ``` Complete in 20.201 s; Rough parallel ops/sec = 1584062 Thread ops/sec = 107176 Operation latency (ns): Count: 32000000 Average: 9257.9421 StdDev: 122412.04 Min: 134 Median: 3623.0493 Max: 56918500 Percentiles: P50: 3623.05 P75: 10288.02 P99: 30219.35 P99.9: 683522.04 P99.99: 7302791.63 ``` New: (add USE_FOLLY=1) ``` Complete in 16.674 s; Rough parallel ops/sec = 1919135 (+21%) Thread ops/sec = 135487 Operation latency (ns): Count: 32000000 Average: 7304.9294 StdDev: 108530.28 Min: 132 Median: 3777.6012 Max: 91030902 Percentiles: P50: 3777.60 P75: 10169.89 P99: 24504.51 P99.9: 59721.59 P99.99: 1861151.83 ``` Reviewed By: anand1976 Differential Revision: D37182983 Pulled By: pdillinger fbshipit-source-id: a17eb05f25b832b6a2c1356f5c657e831a5af8d1	3 years ago
Peter Dillinger	126c223714	Remove deprecated block-based filter (#10184) ... Summary: In https://github.com/facebook/rocksdb/issues/9535, release 7.0, we hid the old block-based filter from being created using the public API, because of its inefficiency. Although we normally maintain read compatibility on old DBs forever, filters are not required for reading a DB, only for optimizing read performance. Thus, it should be acceptable to remove this code and the substantial maintenance burden it carries as useful features are developed and validated (such as user timestamp). This change completely removes the code for reading and writing the old block-based filters, net removing about 1370 lines of code no longer needed. Options removed from testing / benchmarking tools. The prior existence is only evident in a couple of places: * `CacheEntryRole::kDeprecatedFilterBlock` - We can update this public API enum in a major release to minimize source code incompatibilities. * A warning is logged when an old table file is opened that used the old block-based filter. This is provided as a courtesy, and would be a pain to unit test, so manual testing should suffice. Unfortunately, sst_dump does not tell you whether a file uses block-based filter, and the structure of the code makes it very difficult to fix. * To detect that case, `kObsoleteFilterBlockPrefix` (renamed from `kFilterBlockPrefix`) for metaindex is maintained (for now). Other notes: * In some cases where numbers are associated with filter configurations, we have had to update the assigned numbers so that they all correspond to something that exists. * Fixed potential stat counting bug by assuming `filter_checked = false` for cases like `filter == nullptr` rather than assuming `filter_checked = true` * Removed obsolete `block_offset` and `prefix_extractor` parameters from several functions. * Removed some unnecessary checks `if (!table_prefix_extractor() && !prefix_extractor)` because the caller guarantees the prefix extractor exists and is compatible Pull Request resolved: https://github.com/facebook/rocksdb/pull/10184 Test Plan: tests updated, manually test new warning in LOG using base version to generate a DB Reviewed By: riversand963 Differential Revision: D37212647 Pulled By: pdillinger fbshipit-source-id: 06ee020d8de3b81260ffc36ad0c1202cbf463a80	3 years ago
Yanqin Jin	1777e5f7e9	Snapshots with user-specified timestamps (#9879) ... Summary: In RocksDB, keys are associated with (internal) sequence numbers which denote when the keys are written to the database. Sequence numbers in different RocksDB instances are unrelated, thus not comparable. It is nice if we can associate sequence numbers with their corresponding actual timestamps. One thing we can do is to support user-defined timestamp, which allows the applications to specify the format of custom timestamps and encode a timestamp with each key. More details can be found at https://github.com/facebook/rocksdb/wiki/User-defined-Timestamp-%28Experimental%29. This PR provides a different but complementary approach. We can associate rocksdb snapshots (defined in https://github.com/facebook/rocksdb/blob/7.2.fb/include/rocksdb/snapshot.h#L20) with **user-specified** timestamps. Since a snapshot is essentially an object representing a sequence number, this PR establishes a bi-directional mapping between sequence numbers and timestamps. In the past, snapshots are usually taken by readers. The current super-version is grabbed, and a `rocksdb::Snapshot` object is created with the last published sequence number of the super-version. You can see that the reader actually has no good idea of what timestamp to assign to this snapshot, because by the time the `GetSnapshot()` is called, an arbitrarily long period of time may have already elapsed since the last write, which is when the last published sequence number is written. This observation motivates the creation of "timestamped" snapshots on the write path. Currently, this functionality is exposed only to the layer of `TransactionDB`. Application can tell RocksDB to create a snapshot when a transaction commits, effectively associating the last sequence number with a timestamp. It is also assumed that application will ensure any two snapshots with timestamps should satisfy the following: ``` snapshot1.seq < snapshot2.seq iff. snapshot1.ts < snapshot2.ts ``` If the application can guarantee that when a reader takes a timestamped snapshot, there is no active writes going on in the database, then we also allow the user to use a new API `TransactionDB::CreateTimestampedSnapshot()` to create a snapshot with associated timestamp. Code example ```cpp // Create a timestamped snapshot when committing transaction. txn->SetCommitTimestamp(100); txn->SetSnapshotOnNextOperation(); txn->Commit(); // A wrapper API for convenience Status Transaction::CommitAndTryCreateSnapshot( std::shared_ptr<TransactionNotifier> notifier, TxnTimestamp ts, std::shared_ptr<const Snapshot>* ret); // Create a timestamped snapshot if caller guarantees no concurrent writes std::pair<Status, std::shared_ptr<const Snapshot>> snapshot = txn_db->CreateTimestampedSnapshot(100); ``` The snapshots created in this way will be managed by RocksDB with ref-counting and potentially shared with other readers. We provide the following APIs for readers to retrieve a snapshot given a timestamp. ```cpp // Return the timestamped snapshot correponding to given timestamp. If ts is // kMaxTxnTimestamp, then we return the latest timestamped snapshot if present. // Othersise, we return the snapshot whose timestamp is equal to `ts`. If no // such snapshot exists, then we return null. std::shared_ptr<const Snapshot> TransactionDB::GetTimestampedSnapshot(TxnTimestamp ts) const; // Return the latest timestamped snapshot if present. std::shared_ptr<const Snapshot> TransactionDB::GetLatestTimestampedSnapshot() const; ``` We also provide two additional APIs for stats collection and reporting purposes. ```cpp Status TransactionDB::GetAllTimestampedSnapshots( std::vector<std::shared_ptr<const Snapshot>>& snapshots) const; // Return timestamped snapshots whose timestamps fall in [ts_lb, ts_ub) and store them in `snapshots`. Status TransactionDB::GetTimestampedSnapshots( TxnTimestamp ts_lb, TxnTimestamp ts_ub, std::vector<std::shared_ptr<const Snapshot>>& snapshots) const; ``` To prevent the number of timestamped snapshots from growing infinitely, we provide the following API to release timestamped snapshots whose timestamps are older than or equal to a given threshold. ```cpp void TransactionDB::ReleaseTimestampedSnapshotsOlderThan(TxnTimestamp ts); ``` Before shutdown, RocksDB will release all timestamped snapshots. Comparison with user-defined timestamp and how they can be combined: User-defined timestamp persists every key with a timestamp, while timestamped snapshots maintain a volatile mapping between snapshots (sequence numbers) and timestamps. Different internal keys with the same user key but different timestamps will be treated as different by compaction, thus a newer version will not hide older versions (with smaller timestamps) unless they are eligible for garbage collection. In contrast, taking a timestamped snapshot at a certain sequence number and timestamp prevents all the keys visible in this snapshot from been dropped by compaction. Here, visible means (seq < snapshot and most recent). The timestamped snapshot supports the semantics of reading at an exact point in time. Timestamped snapshots can also be used with user-defined timestamp. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9879 Test Plan: ``` make check TEST_TMPDIR=/dev/shm make crash_test_with_txn ``` Reviewed By: siying Differential Revision: D35783919 Pulled By: riversand963 fbshipit-source-id: 586ad905e169189e19d3bfc0cb0177a7239d1bd4	3 years ago
Levi Tamasi	e9c74bc474	Add wide column serialization primitives (#9915) ... Summary: The patch adds some low-level logic that can be used to serialize/deserialize a sorted vector of wide columns to/from a simple binary searchable string representation. Currently, there is no user-facing API; this will be implemented in subsequent stages. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9915 Test Plan: `make check` Reviewed By: siying Differential Revision: D35978076 Pulled By: ltamasi fbshipit-source-id: 33f5f6628ec3bcd8c8beab363b1978ac047a8788	3 years ago
Yu Zhang	16bdb1f999	Add timestamp support to DBImplReadOnly (#10004) ... Summary: This PR adds timestamp support to a read only DB instance opened as `DBImplReadOnly`. A follow up PR will add the same support to `CompactedDBImpl`. With this, read only database has these timestamp related APIs: `ReadOptions.timestamp` : read should return the latest data visible to this specified timestamp `Iterator::timestamp()` : returns the timestamp associated with the key, value `DB:Get(..., std::string* timestamp)` : returns the timestamp associated with the key, value in `timestamp` Test plan (on devserver): ``` $COMPILE_WITH_ASAN=1 make -j24 all $./db_with_timestamp_basic_test --gtest_filter=DBBasicTestWithTimestamp.ReadOnlyDB* ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/10004 Reviewed By: riversand963 Differential Revision: D36434422 Pulled By: jowlyzhang fbshipit-source-id: 5d949e65b1ffb845758000e2b310fdd4aae71cfb	3 years ago
anand76	57997ddaaf	Multi file concurrency in MultiGet using coroutines and async IO (#9968) ... Summary: This PR implements a coroutine version of batched MultiGet in order to concurrently read from multiple SST files in a level using async IO, thus reducing the latency of the MultiGet. The API from the user perspective is still synchronous and single threaded, with the RocksDB part of the processing happening in the context of the caller's thread. In Version::MultiGet, the decision is made whether to call synchronous or coroutine code. A good way to review this PR is to review the first 4 commits in order - de773b3, 70c2f70, 10b50e1, and 377a597 - before reviewing the rest. TODO: 1. Figure out how to build it in CircleCI (requires some dependencies to be installed) 2. Do some stress testing with coroutines enabled No regression in synchronous MultiGet between this branch and main - ``` ./db_bench -use_existing_db=true --db=/data/mysql/rocksdb/prefix_scan -benchmarks="readseq,multireadrandom" -key_size=32 -value_size=512 -num=5000000 -batch_size=64 -multiread_batched=true -use_direct_reads=false -duration=60 -ops_between_duration_checks=1 -readonly=true -adaptive_readahead=true -threads=16 -cache_size=10485760000 -async_io=false -multiread_stride=40000 -statistics ``` Branch - ```multireadrandom : 4.025 micros/op 3975111 ops/sec 60.001 seconds 238509056 operations; 2062.3 MB/s (14767808 of 14767808 found)``` Main - ```multireadrandom : 3.987 micros/op 4013216 ops/sec 60.001 seconds 240795392 operations; 2082.1 MB/s (15231040 of 15231040 found)``` More benchmarks in various scenarios are given below. The measurements were taken with ```async_io=false``` (no coroutines) and ```async_io=true``` (use coroutines). For an IO bound workload (with every key requiring an IO), the coroutines version shows a clear benefit, being ~2.6X faster. For CPU bound workloads, the coroutines version has ~6-15% higher CPU utilization, depending on how many keys overlap an SST file. 1. Single thread IO bound workload on remote storage with sparse MultiGet batch keys (~1 key overlap/file) - No coroutines - ```multireadrandom : 831.774 micros/op 1202 ops/sec 60.001 seconds 72136 operations; 0.6 MB/s (72136 of 72136 found)``` Using coroutines - ```multireadrandom : 318.742 micros/op 3137 ops/sec 60.003 seconds 188248 operations; 1.6 MB/s (188248 of 188248 found)``` 2. Single thread CPU bound workload (all data cached) with ~1 key overlap/file - No coroutines - ```multireadrandom : 4.127 micros/op 242322 ops/sec 60.000 seconds 14539384 operations; 125.7 MB/s (14539384 of 14539384 found)``` Using coroutines - ```multireadrandom : 4.741 micros/op 210935 ops/sec 60.000 seconds 12656176 operations; 109.4 MB/s (12656176 of 12656176 found)``` 3. Single thread CPU bound workload with ~2 key overlap/file - No coroutines - ```multireadrandom : 3.717 micros/op 269000 ops/sec 60.000 seconds 16140024 operations; 139.6 MB/s (16140024 of 16140024 found)``` Using coroutines - ```multireadrandom : 4.146 micros/op 241204 ops/sec 60.000 seconds 14472296 operations; 125.1 MB/s (14472296 of 14472296 found)``` 4. CPU bound multi-threaded (16 threads) with ~4 key overlap/file - No coroutines - ```multireadrandom : 4.534 micros/op 3528792 ops/sec 60.000 seconds 211728728 operations; 1830.7 MB/s (12737024 of 12737024 found) ``` Using coroutines - ```multireadrandom : 4.872 micros/op 3283812 ops/sec 60.000 seconds 197030096 operations; 1703.6 MB/s (12548032 of 12548032 found) ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9968 Reviewed By: akankshamahajan15 Differential Revision: D36348563 Pulled By: anand1976 fbshipit-source-id: c0ce85a505fd26ebfbb09786cbd7f25202038696	3 years ago
Peter Dillinger	bb87164db3	Fork and simplify LRUCache for developing enhancements (#9917) ... Summary: To support a project to prototype and evaluate algorithmic enhancments and alternatives to LRUCache, here I have separated out LRUCache into internal-only "FastLRUCache" and cut it down to essentials, so that details like secondary cache handling and priorities do not interfere with prototyping. These can be re-integrated later as needed, along with refactoring to minimize code duplication (which would slow down prototyping for now). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9917 Test Plan: unit tests updated to ensure basic functionality has (likely) been preserved Reviewed By: anand1976 Differential Revision: D35995554 Pulled By: pdillinger fbshipit-source-id: d67b20b7ada3b5d3bfe56d897a73885894a1d9db	3 years ago
Peter Dillinger	9d0cae7104	Eliminate unnecessary (slow) block cache Ref()ing in MultiGet (#9899) ... Summary: When MultiGet() determines that multiple query keys can be served by examining the same data block in block cache (one Lookup()), each PinnableSlice referring to data in that data block needs to hold on to the block in cache so that they can be released at arbitrary times by the API user. Historically this is accomplished with extra calls to Ref() on the Handle from Lookup(), with each PinnableSlice cleanup calling Release() on the Handle, but this creates extra contention on the block cache for the extra Ref()s and Release()es, especially because they hit the same cache shard repeatedly. In the case of merge operands (possibly more cases?), the problem was compounded by doing an extra Ref()+eventual Release() for each merge operand for a key reusing a block (which could be the same key!), rather than one Ref() per key. (Note: the non-shared case with `biter` was already one per key.) This change optimizes MultiGet not to rely on these extra, contentious Ref()+Release() calls by instead, in the shared block case, wrapping the cache Release() cleanup in a refcounted object referenced by the PinnableSlices, such that after the last wrapped reference is released, the cache entry is Release()ed. Relaxed atomic refcounts should be much faster than mutex-guarded Ref() and Release(), and much less prone to a performance cliff when MultiGet() does a lot of block sharing. Note that I did not use std::shared_ptr, because that would require an extra indirection object (shared_ptr itself new/delete) in order to associate a ref increment/decrement with a Cleanable cleanup entry. (If I assumed it was the size of two pointers, I could do some hackery to make it work without the extra indirection, but that's too fragile.) Some details: * Fixed (removed) extra block cache tracing entries in cases of cache entry reuse in MultiGet, but it's likely that in some other cases traces are missing (XXX comment inserted) * Moved existing implementations for cleanable.h from iterator.cc to new cleanable.cc * Improved API comments on Cleanable * Added a public SharedCleanablePtr class to cleanable.h in case others could benefit from the same pattern (potentially many Cleanables and/or smart pointers referencing a shared Cleanable) * Add a typedef for MultiGetContext::Mask * Some variable renaming for clarity Pull Request resolved: https://github.com/facebook/rocksdb/pull/9899 Test Plan: Added unit tests for SharedCleanablePtr. Greatly enhanced ability of existing tests to detect cache use-after-free. * Release PinnableSlices from MultiGet as they are read rather than in bulk (in db_test_util wrapper). * In ASAN build, default to using a trivially small LRUCache for block_cache so that entries are immediately erased when unreferenced. (Updated two tests that depend on caching.) New ASAN testsuite running time seems OK to me. If I introduce a bug into my implementation where we skip the shared cleanups on block reuse, ASAN detects the bug in `db_basic_test *MultiGet*`. If I remove either of the above testing enhancements, the bug is not detected. Consider for follow-up work: manipulate or randomize ordering of PinnableSlice use and release from MultiGet db_test_util wrapper. But in typical cases, natural ordering gives pretty good functional coverage. Performance test: In the extreme (but possible) case of MultiGetting the same or adjacent keys in a batch, throughput can improve by an order of magnitude. `./db_bench -benchmarks=multireadrandom -db=/dev/shm/testdb -readonly -num=5 -duration=10 -threads=20 -multiread_batched -batch_size=200` Before ops/sec, num=5: 1,384,394 Before ops/sec, num=500: 6,423,720 After ops/sec, num=500: 10,658,794 After ops/sec, num=5: 16,027,257 Also note that previously, with high parallelism, having query keys concentrated in a single block was worse than spreading them out a bit. Now concentrated in a single block is faster than spread out, which is hopefully consistent with natural expectation. Random query performance: with num=1000000, over 999 x 10s runs running before & after simultaneously (each -threads=12): Before: multireadrandom [AVG 999 runs] : 1088699 (± 7344) ops/sec; 120.4 (± 0.8 ) MB/sec After: multireadrandom [AVG 999 runs] : 1090402 (± 7230) ops/sec; 120.6 (± 0.8 ) MB/sec Possibly better, possibly in the noise. Reviewed By: anand1976 Differential Revision: D35907003 Pulled By: pdillinger fbshipit-source-id: bbd244d703649a8ca12d476f2d03853ed9d1a17e	3 years ago
sdong	4f9c0fd083	Add Aggregation Merge Operator (#9780) ... Summary: Add a merge operator that allows users to register specific aggregation function so that they can does aggregation based per key using different aggregation types. See comments of function CreateAggMergeOperator() for actual usage. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9780 Test Plan: Add a unit test to coverage various cases. Reviewed By: ltamasi Differential Revision: D35267444 fbshipit-source-id: 5b02f31c4f3e17e96dd4025cdc49fca8c2868628	3 years ago
Peter Dillinger	efd035164b	Meta-internal folly integration with F14FastMap (#9546) ... Summary: Especially after updating to C++17, I don't see a compelling case for *requiring* any folly components in RocksDB. I was able to purge the existing hard dependencies, and it can be quite difficult to strip out non-trivial components from folly for use in RocksDB. (The prospect of doing that on F14 has changed my mind on the best approach here.) But this change creates an optional integration where we can plug in components from folly at compile time, starting here with F14FastMap to replace std::unordered_map when possible (probably no public APIs for example). I have replaced the biggest CPU users of std::unordered_map with compile-time pluggable UnorderedMap which will use F14FastMap when USE_FOLLY is set. USE_FOLLY is always set in the Meta-internal buck build, and a simulation of that is in the Makefile for public CI testing. A full folly build is not needed, but checking out the full folly repo is much simpler for getting the dependency, and anything else we might want to optionally integrate in the future. Some picky details: * I don't think the distributed mutex stuff is actually used, so it was easy to remove. * I implemented an alternative to `folly::constexpr_log2` (which is much easier in C++17 than C++11) so that I could pull out the hard dependencies on `ConstexprMath.h` * I had to add noexcept move constructors/operators to some types to make F14's complainUnlessNothrowMoveAndDestroy check happy, and I added a macro to make that easier in some common cases. * Updated Meta-internal buck build to use folly F14Map (always) No updates to HISTORY.md nor INSTALL.md as this is not (yet?) considered a production integration for open source users. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9546 Test Plan: CircleCI tests updated so that a couple of them use folly. Most internal unit & stress/crash tests updated to use Meta-internal latest folly. (Note: they should probably use buck but they currently use Makefile.) Example performance improvement: when filter partitions are pinned in cache, they are tracked by PartitionedFilterBlockReader::filter_map_ and we can build a test that exercises that heavily. Build DB with ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters ``` and test with (simultaneous runs with & without folly, ~20 times each to see convergence) ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench_folly -readonly -use_existing_db -benchmarks=readrandom -num=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters -duration=40 -pin_l0_filter_and_index_blocks_in_cache ``` Average ops/s no folly: 26229.2 Average ops/s with folly: 26853.3 (+2.4%) Reviewed By: ajkr Differential Revision: D34181736 Pulled By: pdillinger fbshipit-source-id: ffa6ad5104c2880321d8a1aa7187e00ab0d02e94	3 years ago
gitbw95	f241d082b6	Prevent double caching in the compressed secondary cache (#9747) ... Summary: ### **Summary:** When both LRU Cache and CompressedSecondaryCache are configured together, there possibly are some data blocks double cached. **Changes include:** 1. Update IS_PROMOTED to IS_IN_SECONDARY_CACHE to prevent confusions. 2. This PR updates SecondaryCacheResultHandle and use IsErasedFromSecondaryCache to determine whether the handle is erased in the secondary cache. Then, the caller can determine whether to SetIsInSecondaryCache(). 3. Rename LRUSecondaryCache to CompressedSecondaryCache. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9747 Test Plan: **Test Scripts:** 1. Populate a DB. The on disk footprint is 482 MB. The data is set to be 50% compressible, so the total decompressed size is expected to be 964 MB. ./db_bench --benchmarks=fillrandom --num=10000000 -db=/db_bench_1 2. overwrite it to a stable state: ./db_bench --benchmarks=overwrite,stats --num=10000000 -use_existing_db -duration=10 --benchmark_write_rate_limit=2000000 -db=/db_bench_1 4. Run read tests with diffeernt cache setting: T1: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=520000000 --statistics -db=/db_bench_1 T2: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=320000000 -compressed_secondary_cache_size=400000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 T3: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=520000000 -compressed_secondary_cache_size=400000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 T4: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=20000000 -compressed_secondary_cache_size=500000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 **Before this PR** | Cache Size | Compressed Secondary Cache Size | Cache Hit Rate | |------------|-------------------------------------|----------------| |520 MB | 0 MB | 85.5% | |320 MB | 400 MB | 96.2% | |520 MB | 400 MB | 98.3% | |20 MB | 500 MB | 98.8% | **Before this PR** | Cache Size | Compressed Secondary Cache Size | Cache Hit Rate | |------------|-------------------------------------|----------------| |520 MB | 0 MB | 85.5% | |320 MB | 400 MB | 99.9% | |520 MB | 400 MB | 99.9% | |20 MB | 500 MB | 99.2% | Reviewed By: anand1976 Differential Revision: D35117499 Pulled By: gitbw95 fbshipit-source-id: ea2657749fc13efebe91a8a1b56bc61d6a224a12	3 years ago
Peter Dillinger	6534c6dea4	Fix remaining uses of "backupable" (#9792) ... Summary: Various renaming and fixes to get rid of remaining uses of "backupable" which is terminology leftover from the original, flawed design of BackupableDB. Now any DB can be backed up, using BackupEngine. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9792 Test Plan: CI Reviewed By: ajkr Differential Revision: D35334386 Pulled By: pdillinger fbshipit-source-id: 2108a42b4575c8cccdfd791c549aae93ec2f3329	3 years ago
Yanqin Jin	3b6dc049f7	Support user-defined timestamps in write-committed txns (#9629) ... Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9629 Pessimistic transactions use pessimistic concurrency control, i.e. locking. Keys are locked upon first operation that writes the key or has the intention of writing. For example, `PessimisticTransaction::Put()`, `PessimisticTransaction::Delete()`, `PessimisticTransaction::SingleDelete()` will write to or delete a key, while `PessimisticTransaction::GetForUpdate()` is used by application to indicate to RocksDB that the transaction has the intention of performing write operation later in the same transaction. Pessimistic transactions support two-phase commit (2PC). A transaction can be `Prepared()`'ed and then `Commit()`. The prepare phase is similar to a promise: once `Prepare()` succeeds, the transaction has acquired the necessary resources to commit. The resources include locks, persistence of WAL, etc. Write-committed transaction is the default pessimistic transaction implementation. In RocksDB write-committed transaction, `Prepare()` will write data to the WAL as a prepare section. `Commit()` will write a commit marker to the WAL and then write data to the memtables. While writing to the memtables, different keys in the transaction's write batch will be assigned different sequence numbers in ascending order. Until commit/rollback, the transaction holds locks on the keys so that no other transaction can write to the same keys. Furthermore, the keys' sequence numbers represent the order in which they are committed and should be made visible. This is convenient for us to implement support for user-defined timestamps. Since column families with and without timestamps can co-exist in the same database, a transaction may or may not involve timestamps. Based on this observation, we add two optional members to each `PessimisticTransaction`, `read_timestamp_` and `commit_timestamp_`. If no key in the transaction's write batch has timestamp, then setting these two variables do not have any effect. For the rest of this commit, we discuss only the cases when these two variables are meaningful. read_timestamp_ is used mainly for validation, and should be set before first call to `GetForUpdate()`. Otherwise, the latter will return non-ok status. `GetForUpdate()` calls `TryLock()` that can verify if another transaction has written the same key since `read_timestamp_` till this call to `GetForUpdate()`. If another transaction has indeed written the same key, then validation fails, and RocksDB allows this transaction to refine `read_timestamp_` by increasing it. Note that a transaction can still use `Get()` with a different timestamp to read, but the result of the read should not be used to determine data that will be written later. commit_timestamp_ must be set after finishing writing and before transaction commit. This applies to both 2PC and non-2PC cases. In the case of 2PC, it's usually set after prepare phase succeeds. We currently require that the commit timestamp be chosen after all keys are locked. This means we disallow the `TransactionDB`-level APIs if user-defined timestamp is used by the transaction. Specifically, calling `PessimisticTransactionDB::Put()`, `PessimisticTransactionDB::Delete()`, `PessimisticTransactionDB::SingleDelete()`, etc. will return non-ok status because they specify timestamps before locking the keys. Users are also prompted to use the `Transaction` APIs when they receive the non-ok status. Reviewed By: ltamasi Differential Revision: D31822445 fbshipit-source-id: b82abf8e230216dc89cc519564a588224a88fd43	3 years ago
Siddhartha Roychowdhury	21345d2823	Streaming Compression API for WAL compression. (#9619) ... Summary: Implement a streaming compression API (compress/uncompress) to use for WAL compression. The log_writer would use the compress class/API to compress a record before writing it out in chunks. The log_reader would use the uncompress class/API to uncompress the chunks and combine into a single record. Added unit test to verify the API for different sizes/compression types. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9619 Test Plan: make -j24 check Reviewed By: anand1976 Differential Revision: D34437346 Pulled By: sidroyc fbshipit-source-id: b180569ad2ddcf3106380f8758b556cc0ad18382	3 years ago
Bo Wang	f706a9c199	Add a secondary cache implementation based on LRUCache 1 (#9518) ... Summary: **Summary:** RocksDB uses a block cache to reduce IO and make queries more efficient. The block cache is based on the LRU algorithm (LRUCache) and keeps objects containing uncompressed data, such as Block, ParsedFullFilterBlock etc. It allows the user to configure a second level cache (rocksdb::SecondaryCache) to extend the primary block cache by holding items evicted from it. Some of the major RocksDB users, like MyRocks, use direct IO and would like to use a primary block cache for uncompressed data and a secondary cache for compressed data. The latter allows us to mitigate the loss of the Linux page cache due to direct IO. This PR includes a concrete implementation of rocksdb::SecondaryCache that integrates with compression libraries such as LZ4 and implements an LRU cache to hold compressed blocks. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9518 Test Plan: In this PR, the lru_secondary_cache_test.cc includes the following tests: 1. The unit tests for the secondary cache with either compression or no compression, such as basic tests, fails tests. 2. The integration tests with both primary cache and this secondary cache . **Follow Up:** 1. Statistics (e.g. compression ratio) will be added in another PR. 2. Once this implementation is ready, I will do some shadow testing and benchmarking with UDB to measure the impact. Reviewed By: anand1976 Differential Revision: D34430930 Pulled By: gitbw95 fbshipit-source-id: 218d78b672a2f914856d8a90ff32f2f5b5043ded	3 years ago
Patrick Somaru	f066b5cecb	update buckifier, add support for microbenchmarks (#9598) ... Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9598 Reviewed By: jay-zhuang, hodgesds Differential Revision: D34130191 fbshipit-source-id: e5413f7d6af70a66940022d153b64a3383eccff1	3 years ago
Andrew Kryczka	babe56ddba	Add rate limiter priority to ReadOptions (#9424) ... Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c	3 years ago
mrambacher	aae3093719	Introduce a CountedFileSystem for counting file operations (#9283) ... Summary: Added a CountedFileSystem that tracks a number of file operations (opens, closes, deletes, renames, flushes, syncs, fsyncs, reads, writes). This class was based on the ReportFileOpEnv from db_bench. This is a stepping stone PR to be able to change the SpecialEnv into a SpecialFileSystem, where several of the file varieties wish to do operation counting. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9283 Reviewed By: pdillinger Differential Revision: D33062004 Pulled By: mrambacher fbshipit-source-id: d0d297a7fb9c48c06cbf685e5fa755c27193b6f5	3 years ago
Peter Dillinger	449029f865	Remove deprecated ObjectLibrary::Register() (and Regex public API) (#9439) ... Summary: Regexes are considered potentially problematic for use in registering RocksDB extensions, so we are removing ObjectLibrary::Register() and the Regex public API it depended on (now unused). In reference to https://github.com/facebook/rocksdb/issues/9389 Why? * The power of Regexes can make it hard to reason about which extension will match what. (The replacement API isn't perfect, but we are at least "holding the line" on patterns we have seen in practice.) * It is easy to make regexes that don't quite mean what you think they mean, such as forgetting that the `.` in `foo.bar` can match any character or that matching is nondeterministic, as in `a🅱️42` matching `.*:[0-9]+`. * Some regexes and implementations can have disastrously bad performance. This might not be much practical concern for ObjectLibray here, but we don't want to encourage potentially dangerous further use in production code. (Testing code is fine. See TestRegex.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9439 Test Plan: CI Reviewed By: mrambacher Differential Revision: D33792342 Pulled By: pdillinger fbshipit-source-id: 4f64dcb04764e639162c8977a5fa196f67754cec	3 years ago
Yanqin Jin	50135c1bf3	Move HDFS support to separate repo (#9170) ... Summary: This PR moves HDFS support from RocksDB repo to a separate repo. The new (temporary?) repo in this PR serves as an example before we finalize the decision on where and who to host hdfs support. At this point, people can start from the example repo and fork. Java/JNI is not included yet, and needs to be done later if necessary. The goal is to include this commit in RocksDB 7.0 release. Reference: https://github.com/ajkr/dedupfs by ajkr Pull Request resolved: https://github.com/facebook/rocksdb/pull/9170 Test Plan: Follow the instructions in https://github.com/riversand963/rocksdb-hdfs-env/blob/master/README.md. Build and run db_bench and db_stress. make check Reviewed By: ajkr Differential Revision: D33751662 Pulled By: riversand963 fbshipit-source-id: 22b4db7f31762ed417a20239f5a08dcd1696244f	3 years ago
mrambacher	423538a816	Make MemoryAllocator into a Customizable class (#8980) ... Summary: - Make MemoryAllocator and its implementations into a Customizable class. - Added a "DefaultMemoryAllocator" which uses new and delete - Added a "CountedMemoryAllocator" that counts the number of allocs and free - Updated the existing tests to use these new allocators - Changed the memkind allocator test into a generic test that can test the various allocators. - Added tests for creating all of the allocators - Added tests to verify/create the JemallocNodumpAllocator using its options. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8980 Reviewed By: zhichao-cao Differential Revision: D32990403 Pulled By: mrambacher fbshipit-source-id: 6fdfe8218c10dd8dfef34344a08201be1fa95c76	3 years ago
Peter Dillinger	0050a73a4f	New stable, fixed-length cache keys (#9126) ... Summary: This change standardizes on a new 16-byte cache key format for block cache (incl compressed and secondary) and persistent cache (but not table cache and row cache). The goal is a really fast cache key with practically ideal stability and uniqueness properties without external dependencies (e.g. from FileSystem). A fixed key size of 16 bytes should enable future optimizations to the concurrent hash table for block cache, which is a heavy CPU user / bottleneck, but there appears to be measurable performance improvement even with no changes to LRUCache. This change replaces a lot of disjointed and ugly code handling cache keys with calls to a simple, clean new internal API (cache_key.h). (Preserving the old cache key logic under an option would be very ugly and likely negate the performance gain of the new approach. Complete replacement carries some inherent risk, but I think that's acceptable with sufficient analysis and testing.) The scheme for encoding new cache keys is complicated but explained in cache_key.cc. Also: EndianSwapValue is moved to math.h to be next to other bit operations. (Explains some new include "math.h".) ReverseBits operation added and unit tests added to hash_test for both. Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126 Test Plan: ### Basic correctness Several tests needed updates to work with the new functionality, mostly because we are no longer relying on filesystem for stable cache keys so table builders & readers need more context info to agree on cache keys. This functionality is so core, a huge number of existing tests exercise the cache key functionality. ### Performance Create db with `TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters` And test performance with `TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4` using DEBUG_LEVEL=0 and simultaneous before & after runs. Before ops/sec, avg over 100 runs: 121924 After ops/sec, avg over 100 runs: 125385 (+2.8%) ### Collision probability I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity over many months, by making some pessimistic simplifying assumptions: * Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys) * All of every file is cached for its entire lifetime We use a simple table with skewed address assignment and replacement on address collision to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output with `./cache_bench -stress_cache_key -sck_keep_bits=40`: ``` Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached) ``` These come from default settings of 2.5M files per day of 32 MB each, and `-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality. More default assumptions, relatively pessimistic: * 100 DBs in same process (doesn't matter much) * Re-open DB in same process (new session ID related to old session ID) on average every 100 files generated * Restart process (all new session IDs unrelated to old) 24 times per day After enough data, we get a result at the end: ``` (keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected) ``` If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data: ``` (keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected) (keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected) ``` The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases: ``` 197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected) ``` I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data. Reviewed By: zhichao-cao Differential Revision: D33171746 Pulled By: pdillinger fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f	3 years ago
Yanqin Jin	e05c2bb549	Stress test for RocksDB transactions (#8936) ... Summary: Current db_stress does not cover complex read-write transactions. Therefore, this PR adds coverage for emulated MyRocks-style transactions in `MultiOpsTxnsStressTest`. To achieve this, we need: - Add a new operation type 'customops' so that we can add new complex groups of operations, e.g. transactions involving multiple read-write operations. - Implement three read-write transactions and two read-only ones to emulate MyRocks-style transactions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8936 Test Plan: ``` make check ./db_stress -test_multi_ops_txns -use_txn -clear_column_family_one_in=0 -column_families=1 -writepercent=0 -delpercent=0 -delrangepercent=0 -customopspercent=60 -readpercent=20 -prefixpercent=0 -iterpercent=20 -reopen=0 -ops_per_thread=100000 ``` Next step is to add more configurability and refine input generation and result reporting, which will done in separate follow-up PRs. Reviewed By: zhichao-cao Differential Revision: D31071795 Pulled By: riversand963 fbshipit-source-id: 50d7c828346ec643311336b904848a1588a37006	3 years ago
Andrew Kryczka	ce42ae6ffd	Fix Statistics in db_stress (#9260) ... Summary: The `Statistics` objects are meant to be shared across translation units, but this was prevented by declaring them static. We need to ensure they are defined once in the program. The effect is now `StressTest::PrintStatistics()` can actually print statistics since it now sees non-null values when `--statistics=1`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9260 Reviewed By: zhichao-cao Differential Revision: D32910162 Pulled By: ajkr fbshipit-source-id: c926d6f556177987bee5fa3cbc87597803b230ee	3 years ago
Levi Tamasi	dc5de45af8	Support readahead during compaction for blob files (#9187) ... Summary: The patch adds a new BlobDB configuration option `blob_compaction_readahead_size` that can be used to enable prefetching data from blob files during compaction. This is important when using storage with higher latencies like HDDs or remote filesystems. If enabled, prefetching is used for all cases when blobs are read during compaction, namely garbage collection, compaction filters (when the existing value has to be read from a blob file), and `Merge` (when the value of the base `Put` is stored in a blob file). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9187 Test Plan: Ran `make check` and the stress/crash test. Reviewed By: riversand963 Differential Revision: D32565512 Pulled By: ltamasi fbshipit-source-id: 87be9cebc3aa01cc227bec6b5f64d827b8164f5d	3 years ago
anand76	78556c14dd	Secondary cache error injection (#9002) ... Summary: Implement secondary cache error injection in db_stress. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9002 Reviewed By: zhichao-cao Differential Revision: D31874896 Pulled By: anand1976 fbshipit-source-id: 8cf04c061a4a44efa0fe88423d05cade67b85f73	3 years ago
Peter Dillinger	ad5325a736	Experimental support for SST unique IDs (#8990) ... Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243	3 years ago