Summary:
Delete range logic is moved from `DBIter` to `MergingIterator`, and `MergingIterator` will seek to the end of a range deletion if possible instead of scanning through each key and check with `RangeDelAggregator`.
With the invariant that a key in level L (consider memtable as the first level, each immutable and L0 as a separate level) has a larger sequence number than all keys in any level >L, a range tombstone `[start, end)` from level L covers all keys in its range in any level >L. This property motivates optimizations in iterator:
- in `Seek(target)`, if level L has a range tombstone `[start, end)` that covers `target.UserKey`, then for all levels > L, we can do Seek() on `end` instead of `target` to skip some range tombstone covered keys.
- in `Next()/Prev()`, if the current key is covered by a range tombstone `[start, end)` from level L, we can do `Seek` to `end` for all levels > L.
This PR implements the above optimizations in `MergingIterator`. As all range tombstone covered keys are now skipped in `MergingIterator`, the range tombstone logic is removed from `DBIter`. The idea in this PR is similar to https://github.com/facebook/rocksdb/issues/7317, but this PR leaves `InternalIterator` interface mostly unchanged. **Credit**: the cascading seek optimization and the sentinel key (discussed below) are inspired by [Pebble](https://github.com/cockroachdb/pebble/blob/master/merging_iter.go) and suggested by ajkr in https://github.com/facebook/rocksdb/issues/7317. The two optimizations are mostly implemented in `SeekImpl()/SeekForPrevImpl()` and `IsNextDeleted()/IsPrevDeleted()` in `merging_iterator.cc`. See comments for each method for more detail.
One notable change is that the minHeap/maxHeap used by `MergingIterator` now contains range tombstone end keys besides point key iterators. This helps to reduce the number of key comparisons. For example, for a range tombstone `[start, end)`, a `start` and an `end` `HeapItem` are inserted into the heap. When a `HeapItem` for range tombstone start key is popped from the minHeap, we know this range tombstone becomes "active" in the sense that, before the range tombstone's end key is popped from the minHeap, all the keys popped from this heap is covered by the range tombstone's internal key range `[start, end)`.
Another major change, *delete range sentinel key*, is made to `LevelIterator`. Before this PR, when all point keys in an SST file are iterated through in `MergingIterator`, a level iterator would advance to the next SST file in its level. In the case when an SST file has a range tombstone that covers keys beyond the SST file's last point key, advancing to the next SST file would lose this range tombstone. Consequently, `MergingIterator` could return keys that should have been deleted by some range tombstone. We prevent this by pretending that file boundaries in each SST file are sentinel keys. A `LevelIterator` now only advance the file iterator once the sentinel key is processed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10449
Test Plan:
- Added many unit tests in db_range_del_test
- Stress test: `./db_stress --readpercent=5 --prefixpercent=19 --writepercent=20 -delpercent=10 --iterpercent=44 --delrangepercent=2`
- Additional iterator stress test is added to verify against iterators against expected state: https://github.com/facebook/rocksdb/issues/10538. This is based on ajkr's previous attempt https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913.
```
python3 ./tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --compression_type=none --max_background_compactions=8 --value_size_mult=33 --max_key=5000000 --interval=10 --duration=7200 --delrangepercent=3 --delpercent=9 --iterpercent=25 --writepercent=60 --readpercent=3 --prefixpercent=0 --num_iterations=1000 --range_deletion_width=100 --verify_iterator_with_expected_state_one_in=1
```
- Performance benchmark: I used a similar setup as in the blog [post](http://rocksdb.org/blog/2018/11/21/delete-range.html) that introduced DeleteRange, "a database with 5 million data keys, and 10000 range tombstones (ignoring those dropped during compaction) that were written in regular intervals after 4.5 million data keys were written". As expected, the performance with this PR depends on the range tombstone width.
```
# Setup:
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=fillrandom --writes=4500000 --num=5000000
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=overwrite --writes=500000 --num=5000000 --use_existing_db=true --writes_per_range_tombstone=50
# Scan entire DB
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=readseq[-X5] --use_existing_db=true --num=5000000 --disable_auto_compactions=true
# Short range scan (10 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=100000 --seek_nexts=10 --disable_auto_compactions=true
# Long range scan(1000 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=2500 --seek_nexts=1000 --disable_auto_compactions=true
```
Avg over of 10 runs (some slower tests had fews runs):
For the first column (tombstone), 0 means no range tombstone, 100-10000 means width of the 10k range tombstones, and 1 means there is a single range tombstone in the entire DB (width is 1000). The 1 tombstone case is to test regression when there's very few range tombstones in the DB, as no range tombstone is likely to take a different code path than with range tombstones.
- Scan entire DB
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2525600 (± 43564) |2486917 (± 33698) |-1.53% |
| 100 |1853835 (± 24736) |2073884 (± 32176) |+11.87% |
| 1000 |422415 (± 7466) |1115801 (± 22781) |+164.15% |
| 10000 |22384 (± 227) |227919 (± 6647) |+918.22% |
| 1 range tombstone |2176540 (± 39050) |2434954 (± 24563) |+11.87% |
- Short range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |35398 (± 533) |35338 (± 569) |-0.17% |
| 100 |28276 (± 664) |31684 (± 331) |+12.05% |
| 1000 |7637 (± 77) |25422 (± 277) |+232.88% |
| 10000 |1367 |28667 |+1997.07% |
| 1 range tombstone |32618 (± 581) |32748 (± 506) |+0.4% |
- Long range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2262 (± 33) |2353 (± 20) |+4.02% |
| 100 |1696 (± 26) |1926 (± 18) |+13.56% |
| 1000 |410 (± 6) |1255 (± 29) |+206.1% |
| 10000 |25 |414 |+1556.0% |
| 1 range tombstone |1957 (± 30) |2185 (± 44) |+11.65% |
- Microbench does not show significant regression: https://gist.github.com/cbi42/59f280f85a59b678e7e5d8561e693b61
Reviewed By: ajkr
Differential Revision: D38450331
Pulled By: cbi42
fbshipit-source-id: b5ef12e8d8c289ed2e163ccdf277f5039b511fca
Summary:
With the current code, when a blob isn't found in the cache and gets read
from the blob file and then inserted into the cache, the application gets
passed the self-contained `PinnableSlice` resulting from the blob file read.
The patch changes this so that the `PinnableSlice` pins the cache entry
instead in this case.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10625
Test Plan: `make check`
Reviewed By: pdillinger
Differential Revision: D39220904
Pulled By: ltamasi
fbshipit-source-id: cb9c62881e3523b1e9f614e00bf503bac2fe3b0a
Summary:
This stat was only getting updated in the async (coroutine) version of MultiGet.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10622
Reviewed By: akankshamahajan15
Differential Revision: D39188790
Pulled By: anand1976
fbshipit-source-id: 7e231507f65fc94c8a006c38f79dfba182a2c24a
Summary:
sanity check value for option `memtable_protection_bytes_per_key` in `ColumnFamilyData::ValidateOptions()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10621
Test Plan: `make check`, added unit test in ColumnFamilyTest.
Reviewed By: ajkr
Differential Revision: D39180133
Pulled By: cbi42
fbshipit-source-id: 009e0da3ccb332d1c9e14d20193304610bd4eb8a
Summary:
**Context:**
Below crash test revealed a bug that directory containing CURRENT file (short for `dir_contains_current_file` below) was not always get synced after a new CURRENT is created and being called with `RenameFile` as part of the creation.
This bug exposes a risk that such un-synced directory containing the updated CURRENT can’t survive a host crash (e.g, power loss) hence get corrupted. This then will be followed by a recovery from a corrupted CURRENT that we don't want.
The root-cause is that a nullptr `FSDirectory* dir_contains_current_file` sometimes gets passed-down to `SetCurrentFile()` hence in those case `dir_contains_current_file->FSDirectory::FsyncWithDirOptions()` will be skipped (which otherwise will internally call`Env/FS::SyncDic()` )
```
./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --allow_data_in_errors=True --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=8 --block_size=16384 --bloom_bits=134.8015470676662 --bottommost_compression_type=disable --cache_size=8388608 --checkpoint_one_in=1000000 --checksum_type=kCRC32c --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=2 --compaction_ttl=100 --compression_max_dict_buffer_bytes=511 --compression_max_dict_bytes=16384 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=65536 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --expected_values_dir=$exp --fail_if_options_file_error=1 --file_checksum_impl=none --flush_one_in=1000000 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=4 --ingest_external_file_one_in=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --mark_for_compaction_one_file_in=10 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=16384 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.001 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --mmap_read=1 --nooverwritepercent=1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_pinning=2 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=5 --prefixpercent=5 --prepopulate_block_cache=1 --progress_reports=0 --read_fault_one_in=1000 --readpercent=45 --recycle_log_file_num=0 --reopen=0 --ribbon_starting_level=999 --secondary_cache_fault_one_in=32 --secondary_cache_uri=compressed_secondary_cache://capacity=8388608 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --subcompactions=3 --sync_fault_injection=1 --target_file_size_base=2097 --target_file_size_multiplier=2 --test_batches_snapshots=1 --top_level_index_pinning=1 --use_full_merge_v1=1 --use_merge=1 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --write_buffer_size=4194 --writepercent=35
```
```
stderr:
WARNING: prefix_size is non-zero but memtablerep != prefix_hash
db_stress: utilities/fault_injection_fs.cc:748: virtual rocksdb::IOStatus rocksdb::FaultInjectionTestFS::RenameFile(const std::string &, const std::string &, const rocksdb::IOOptions &, rocksdb::IODebugContext *): Assertion `tlist.find(tdn.second) == tlist.end()' failed.`
```
**Summary:**
The PR ensured the non-test path pass down a non-null dir containing CURRENT (which is by current RocksDB assumption just db_dir) by doing the following:
- Renamed `directory_to_fsync` as `dir_contains_current_file` in `SetCurrentFile()` to tighten the association between this directory and CURRENT file
- Changed `SetCurrentFile()` API to require `dir_contains_current_file` being passed-in, instead of making it by default nullptr.
- Because `SetCurrentFile()`'s `dir_contains_current_file` is passed down from `VersionSet::LogAndApply()` then `VersionSet::ProcessManifestWrites()` (i.e, think about this as a chain of 3 functions related to MANIFEST update), these 2 functions also got refactored to require `dir_contains_current_file`
- Updated the non-test-path callers of these 3 functions to obtain and pass in non-nullptr `dir_contains_current_file`, which by current assumption of RocksDB, is the `FSDirectory* db_dir`.
- `db_impl` path will obtain `DBImpl::directories_.getDbDir()` while others with no access to such `directories_` are obtained on the fly by creating such object `FileSystem::NewDirectory(..)` and manage it by unique pointers to ensure short life time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10573
Test Plan:
- `make check`
- Passed the repro db_stress command
- For future improvement, since we currently don't assert dir containing CURRENT to be non-nullptr due to https://github.com/facebook/rocksdb/pull/10573#pullrequestreview-1087698899, there is still chances that future developers mistakenly pass down nullptr dir containing CURRENT thus resulting skipped sync dir and cause the bug again. Therefore a smarter test (e.g, such as quoted from ajkr "(make) unsynced data loss to be dropping files corresponding to unsynced directory entries") is still needed.
Reviewed By: ajkr
Differential Revision: D39005886
Pulled By: hx235
fbshipit-source-id: 336fb9090d0cfa6ca3dd580db86268007dde7f5a
Summary:
The patch adds a dedicated cache entry role for blob values and switches
to a registered deleter so that blobs show up as a separate bucket
(as opposed to "Misc") in the cache occupancy statistics, e.g.
```
Block cache entry stats(count,size,portion): DataBlock(133515,531.73 MB,13.6866%) BlobValue(1824855,3.10 GB,81.7071%) Misc(1,0.00 KB,0%)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10601
Test Plan: Ran `make check` and tested the cache occupancy statistics using `db_bench`.
Reviewed By: riversand963
Differential Revision: D39107915
Pulled By: ltamasi
fbshipit-source-id: 8446c3b190a41a144030df73f318eeda4398c125
Summary:
Some APIs for getting live files, which are used by Checkpoint
and BackupEngine, can optionally trigger and wait for a flush. These
would deadlock when used on a read-only DB. Here we fix that by assuming
the user wants the overall operation to succeed and is OK without
flushing (because the DB is read-only).
Follow-up work: the same or other issues can be hit by directly invoking
some DB functions that are clearly not appropriate for read-only
instance, but are not covered by overrides in DBImplReadOnly and
CompactedDBImpl. These should be fixed to avoid similar problems on
accidental misuse. (Long term, it would be nice to have a DBReadOnly
class without those members, like BackupEngineReadOnly.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10569
Test Plan: tests updated to catch regression (hang before the fix)
Reviewed By: riversand963
Differential Revision: D38995759
Pulled By: pdillinger
fbshipit-source-id: f5f8bc7123e13cb45bd393dd974d7d6eda20bc68
Summary:
The patch improves the bookkeeping around the memory usage of
cached blobs in two ways: 1) it uses `malloc_usable_size`, which accounts
for allocator bin sizes etc., and 2) it also considers the memory usage
of the `BlobContents` object in addition to the blob itself. Note: some unit
tests had been relying on the cache charge being equal to the size of the
cached blob; these were updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10583
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D39060680
Pulled By: ltamasi
fbshipit-source-id: 3583adce2b4ce6e84861f3fadccbfd2e5a3cc482
Summary:
Timer has a limitation that it cannot re-register a task with the same name,
because the cancel only mark the task as invalid and wait for the Timer thread
to clean it up later, before the task is cleaned up, the same task name cannot
be added. Which makes the task option update likely to fail, which basically
cancel and re-register the same task name. Change the periodic task name to a
random unique id and store it in periodic_task_scheduler.
Also refactor the `periodic_work` to `periodic_task` to make each job function
as a `task`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10379
Test Plan: unittests
Reviewed By: ajkr
Differential Revision: D38000615
Pulled By: jay-zhuang
fbshipit-source-id: e4135f9422e3b53aaec8eda54f4e18ce633a279e
Summary:
The patch introduces a new class called `BlobContents`, which represents
a single uncompressed blob value. We currently use `std::string` for this
purpose; `BlobContents` is somewhat smaller but the primary reason for a
dedicated class is that it enables certain improvements and optimizations
like eliding a copy when inserting a blob into the cache, using custom
allocators, or more control over and better accounting of the memory usage
of cached blobs (see https://github.com/facebook/rocksdb/issues/10484).
(We plan to implement these in subsequent PRs.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10571
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D39000965
Pulled By: ltamasi
fbshipit-source-id: f296eddf9dec4fc3e11cad525b462bdf63c78f96
Summary:
WAL append and switch can both happen between `FlushWAL(true /* sync */)`'s sync operations and its call to `MarkLogsSynced()`. We permit this since locks need to be released for the sync operations. Such an appended/switched WAL is both inactive and incompletely synced at the time `MarkLogsSynced()` processes it.
Prior to this PR, `MarkLogsSynced()` assumed all inactive WALs were fully synced and removed them from consideration for future syncs. That was wrong in the scenario described above and led to the latest append(s) never being synced. This PR changes `MarkLogsSynced()` to only remove inactive WALs from consideration for which all flushed data has been synced.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10560
Test Plan: repro unit test for the scenario described above. Without this PR, it fails on "key2" not found
Reviewed By: riversand963
Differential Revision: D38957391
Pulled By: ajkr
fbshipit-source-id: da77175eba97ff251a4219b227b3bb2d4843ed26
Summary:
In UniversalCompactionBuilder::PickCompactionToReduceSortedRuns, we passed start_level to get compression type and options. I think that is wrong and we should use output_level instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10515
Reviewed By: hx235
Differential Revision: D38611335
Pulled By: ajkr
fbshipit-source-id: bb860caed4b6c6bbde8f75fc50cf875a9f04723d
Summary:
This PR exploits parallelism in MultiGet across levels. It applies only to the coroutine version of MultiGet. Previously, MultiGet file reads from SST files in the same level were parallelized. With this PR, MultiGet batches with keys distributed across multiple levels are read in parallel. This is accomplished by splitting the keys not present in a level (determined by bloom filtering) into a separate batch, and processing the new batch in parallel with the original batch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10535
Test Plan:
1. Ensure existing MultiGet unit tests pass, updating them as necessary
2. New unit tests - TODO
3. Run stress test - TODO
No noticeable regression (<1%) without async IO -
Without PR: `multireadrandom : 7.261 micros/op 1101724 ops/sec 60.007 seconds 66110936 operations; 571.6 MB/s (8168992 of 8168992 found)`
With PR: `multireadrandom : 7.305 micros/op 1095167 ops/sec 60.007 seconds 65717936 operations; 568.2 MB/s (8271992 of 8271992 found)`
For a fully cached DB, but with async IO option on, no regression observed (<1%) -
Without PR: `multireadrandom : 5.201 micros/op 1538027 ops/sec 60.005 seconds 92288936 operations; 797.9 MB/s (11540992 of 11540992 found) `
With PR: `multireadrandom : 5.249 micros/op 1524097 ops/sec 60.005 seconds 91452936 operations; 790.7 MB/s (11649992 of 11649992 found) `
Reviewed By: akankshamahajan15
Differential Revision: D38774009
Pulled By: anand1976
fbshipit-source-id: c955e259749f1c091590ade73105b3ee46cd0007
Summary:
The patch adds a new API `GetEntity` that can be used to perform
wide-column point lookups. It also extends the `Get` code path and
the `MemTable` / `MemTableList` and `Version` / `GetContext` logic
accordingly so that wide-column entities can be served from both
memtables and SSTs. If the result of a lookup is a wide-column entity
(`kTypeWideColumnEntity`), it is passed to the application in deserialized
form; if it is a plain old key-value (`kTypeValue`), it is presented as a
wide-column entity with a single default (anonymous) column.
(In contrast, regular `Get` returns plain old key-values as-is, and
returns the value of the default column for wide-column entities, see
https://github.com/facebook/rocksdb/issues/10483 .)
The result of `GetEntity` is a self-contained `PinnableWideColumns` object.
`PinnableWideColumns` contains a `PinnableSlice`, which either stores the
underlying data in its own buffer or holds on to a cache handle. It also contains
a `WideColumns` instance, which indexes the contents of the `PinnableSlice`,
so applications can access the values of columns efficiently.
There are several pieces of functionality which are currently not supported
for wide-column entities: there is currently no `MultiGetEntity` or wide-column
iterator; also, `Merge` and `GetMergeOperands` are not supported, and there
is no `GetEntity` implementation for read-only and secondary instances.
We plan to implement these in future PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10540
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D38847474
Pulled By: ltamasi
fbshipit-source-id: 42311a34ccdfe88b3775e847a5e2a5296e002b5b
Summary:
Previously, the flushes triggered by `WriteBufferManager` could affect
the same CF repeatedly if it happens to get consecutive writes. Such
flushes are not particularly useful for reducing memory usage since
they switch nearly-empty memtables to immutable while they've just begun
filling their first arena block. In fact they may not even reduce the
mutable memory count if they involve replacing one mutable memtable containing
one arena block with a new mutable memtable containing one arena block.
Further, if such switches happen even a few times before a flush finishes,
the immutable memtable limit will be reached and writes will stall.
This PR adds a heuristic to not switch memtables to immutable for CFs
that already have one or more immutable memtables awaiting flush. There
is a memory usage regression if the user continues writing to the same
CF, that DB does not have any CFs eligible for switching, flushes
are not finishing, and the `WriteBufferManager` was constructed with
`allow_stall=false`. Before, it would grow by switching nearly empty
memtables until writes stall. Now, it would grow by filling memtables
until writes stall. This feels like an acceptable behavior change because
users who prefer to stall over violate the memory limit should be using
`allow_stall=true`, which is unaffected by this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6364
Test Plan:
- Command:
`rm -rf /dev/shm/dbbench/ && TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num_multi_db=8 -num_column_families=2 -write_buffer_size=4194304 -db_write_buffer_size=16777216 -compression_type=none -statistics=true -target_file_size_base=4194304 -max_bytes_for_level_base=16777216`
- `rocksdb.db.write.stall` count before this PR: 175
- `rocksdb.db.write.stall` count after this PR: 0
Reviewed By: jay-zhuang
Differential Revision: D20167197
Pulled By: ajkr
fbshipit-source-id: 4a64064e9bc33d57c0a35f15547542d0191d0cb7
Summary:
The fix in https://github.com/facebook/rocksdb/issues/10513 was not complete w.r.t range deletion handling. It didn't handle the case where a file with a range tombstone covering a key also overlapped another key in the batch. In that case, ```mget_range``` would be non-empty. However, ```mget_range``` would only have the second key and, therefore, the first key would be skipped when iterating through the range tombstones in ```TableCache::MultiGet```.
Test plan -
1. Add a unit test
2. Run stress tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10534
Reviewed By: akankshamahajan15
Differential Revision: D38773880
Pulled By: anand1976
fbshipit-source-id: dae491dbe52e18bbce5179b77b63f20771a66c00
Summary:
RocksDB's `Cache` abstraction currently supports two priority levels for items: high (used for frequently accessed/highly valuable SST metablocks like index/filter blocks) and low (used for SST data blocks). Blobs are typically lower-value targets for caching than data blocks, since 1) with BlobDB, data blocks containing blob references conceptually form an index structure which has to be consulted before we can read the blob value, and 2) cached blobs represent only a single key-value, while cached data blocks generally contain multiple KVs. Since we would like to make it possible to use the same backing cache for the block cache and the blob cache, it would make sense to add a new, lower-than-low cache priority level (bottom level) for blobs so data blocks are prioritized over them.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10461
Reviewed By: siying
Differential Revision: D38672823
Pulled By: ltamasi
fbshipit-source-id: 90cf7362036563d79891f47be2cc24b827482743
Summary:
Fix copyright for two more extra headers to make internal tool happy.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10525
Reviewed By: jay-zhuang
Differential Revision: D38661390
fbshipit-source-id: ab2d055bfd145dfe82b5bae7a6c25cc338c8de94
Summary:
... so that cache keys can be derived from DB manifest data
before reading the file from storage--so that every part of the file
can potentially go in a persistent cache.
See updated comments in cache_key.cc for technical details. Importantly,
the new cache key encoding uses some fancy but efficient math to pack
data into the cache key without depending on the sizes of the various
pieces. This simplifies some existing code creating cache keys, like
cache warming before the file size is known.
This should provide us an essentially permanent mapping between SST
unique IDs and base cache keys, with the ability to "upgrade" SST
unique IDs (and thus cache keys) with new SST format_versions.
These cache keys are of similar, perhaps indistinguishable quality to
the previous generation. Before this change (see "corrected" days
between collision):
```
./cache_bench -stress_cache_key -sck_keep_bits=43
18 collisions after 2 x 90 days, est 10 days between (1.15292e+19 corrected)
```
After this change (keep 43 bits, up through 50, to validate "trajectory"
is ok on "corrected" days between collision):
```
19 collisions after 3 x 90 days, est 14.2105 days between (1.63836e+19 corrected)
16 collisions after 5 x 90 days, est 28.125 days between (1.6213e+19 corrected)
15 collisions after 7 x 90 days, est 42 days between (1.21057e+19 corrected)
15 collisions after 17 x 90 days, est 102 days between (1.46997e+19 corrected)
15 collisions after 49 x 90 days, est 294 days between (2.11849e+19 corrected)
15 collisions after 62 x 90 days, est 372 days between (1.34027e+19 corrected)
15 collisions after 53 x 90 days, est 318 days between (5.72858e+18 corrected)
15 collisions after 309 x 90 days, est 1854 days between (1.66994e+19 corrected)
```
However, the change does modify (probably weaken) the "guaranteed unique" promise from this
> SST files generated in a single process are guaranteed to have unique cache keys, unless/until number session ids * max file number = 2**86
to this (see https://github.com/facebook/rocksdb/issues/10388)
> With the DB id limitation, we only have nice guaranteed unique cache keys for files generated in a single process until biggest session_id_counter and offset_in_file reach combined 64 bits
I don't think this is a practical concern, though.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10394
Test Plan: unit tests updated, see simulation results above
Reviewed By: jay-zhuang
Differential Revision: D38667529
Pulled By: pdillinger
fbshipit-source-id: 49af3fe7f47e5b61162809a78b76c769fd519fba
Summary:
The info LOG file does not currently give any direct
information about the existence of old, live snapshots, nor how to
estimate wall time from a sequence number within the scope of LOG
history. This change addresses both with:
* Logging smallest and largest seqnos for generated SST files, which can
help associate sequence numbers with write time (based on flushes).
* Logging oldest_snapshot_seqno for each compaction, which (along with
that seqno info) helps us to determine how much old data might be kept
around for old (leaked?) snapshots. Including the date here I thought might
be excessive.
I wanted to log the date and seqno of the oldest snapshot with periodic
stats, but the current structure of the code doesn't really support that
because `DumpDBStats` doesn't have access to the DB object.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10454
Test Plan:
manual inspect LOG from
`KEEP_DB=1 ./db_basic_test --gtest_filter=*CompactBetweenSnapshots*`
Reviewed By: ajkr
Differential Revision: D38326948
Pulled By: pdillinger
fbshipit-source-id: 294918ffc04a419844146cd826045321b4d5c038
Summary:
https://github.com/facebook/rocksdb/pull/10057 caused a regression bug: since the base level size is not adjusted based on L0 size anymore, L0 score might become very large. This makes compaction heavily favor L0->L1 compaction against L1->L2 compaction, and cause in some cases, data stuck in L1 without being moved down. We fix calculating a score of L0 by size(L0)/size(L1) in the case where L0 is large..
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10518
Test Plan: run db_bench against data on tmpfs and watch the behavior of data stuck in L1 goes away.
Reviewed By: ajkr
Differential Revision: D38603145
fbshipit-source-id: 4949e52dc28b54aacfe08417c6e6cc7e40a27225
Summary:
New blobdb has a bug in compaction filter, where `blob_value_` is not reset for next iterated key. This will cause blob_value_ not empty and previous value read from blob is passed into the filter function for next key, even if its value is not in blob. Fixed by reseting regardless of key type.
Test Case:
Add `FilterByValueLength` test case in `DBBlobCompactionTest`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10391
Reviewed By: riversand963
Differential Revision: D38629900
Pulled By: ltamasi
fbshipit-source-id: 47d23ff2e5ec697958a210db9e6ceeb8b2fc49fa
Summary:
Some files miss headers. Also some headers are irregular. Fix them to make an internal checkup tool happy.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10519
Reviewed By: jay-zhuang
Differential Revision: D38603291
fbshipit-source-id: 13b1bbd6d48f5ee15ba20da67544396de48238f1
Summary:
Moved linux builds to using docker to avoid CI instability caused by dependency installation site down.
Added the `Dockerfile` which is used to build the image.
The build time is also significantly reduced, because no dependencies installation and with using 2xlarge+ instance for slow build (like tsan test).
Also fixed a few issues detected while building this:
* `DestoryDB()` Status not checked for a few tests
* nullptr might be used in `inlineskiplist.cc`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10496
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D38554200
Pulled By: jay-zhuang
fbshipit-source-id: 16e8fb2bf07b9c84bb27fb18421c4d54f2f248fd
Summary:
A test in db_block_cache_test.cc was skipping ClockCache due to the 16-byte key length requirement. We fixed this. Along the way, we fixed a bug in ApplyToSomeEntries, which assumed the function being applied could modify handle metadata, and thus took an exclusive reference. This is incompatible with calls that need to inspect every element (including externally referenced ones) to gather stats.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10482
Test Plan: ``make -j24 check``
Reviewed By: anand1976
Differential Revision: D38553073
Pulled By: guidotag
fbshipit-source-id: 0ed63fed4d3b89e5056b35b7091fce579f5647ae
Summary:
A flag in WritableFileWriter is introduced to remember error has happened. Subsequent operations will fail with an assertion. Those operations, except Close() are not supposed to be called anyway. This change will help catch bug in tests and stress tests and limit damage of a potential bug of continue writing to a file after a failure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10489
Test Plan: Fix existing unit tests and watch crash tests for a while.
Reviewed By: anand1976
Differential Revision: D38473277
fbshipit-source-id: 09aafb971e56cfd7f9ef92ad15b883f54acf1366
Summary:
The main purpose is to make debugging easier without sacrificing performance.
Instead of using a boolean variable for `CompactionIterator::valid_`, we can extend it to an `uint8_t`,
using the LSB to denote if the compaction iterator is valid and 4 additional bits to denote where
the iterator is set valid inside `NextFromInput()`. Therefore, when the control flow reaches
`PrepareOutput()` and hits assertion there, we can have a better idea of what has gone wrong.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10505
Test Plan:
make check
```
TEST_TMPDIR=/dev/shm/rocksdb time ./db_bench -compression_type=none -write_buffer_size=1073741824 -benchmarks=fillseq,flush
```
The above command has a 'flush' benchmark which uses `CompactionIterator`. I haven't observed any CPU regression or drop in throughput or latency increase.
Reviewed By: ltamasi
Differential Revision: D38551615
Pulled By: riversand963
fbshipit-source-id: 1250848fc118bb753d71fa9ff8ba840df999f5e0
Summary:
This PR fixes 2 bugs introduced in https://github.com/facebook/rocksdb/issues/10432 -
1. If the bloom filter returned a negative result for all MultiGet keys in a file, the range tombstones in that file were being ignored, resulting in incorrect results if those tombstones covered a key in a higher level.
2. If all the keys in a file were filtered out in `TableCache::MultiGetFilter`, the table cache handle was not being released.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10513
Test Plan: Add a new unit test that fails without this fix
Reviewed By: akankshamahajan15
Differential Revision: D38548739
Pulled By: anand1976
fbshipit-source-id: a741a1e25d2e991d63f038100f126c2dc404a87c
Summary:
We have recently added caching support to BlobDB, and separately,
implemented an optimization where reading blobs from the cache
results in the cache handle being transferred to the target `PinnableSlice`
(as opposed to the contents getting copied). With these changes,
it makes sense to reset the `PinnableSlice` storing the blob value in
`DBIter` as soon as we move to a different iterator position to prevent
us from holding on to the cache handle any longer than necessary.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10490
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D38473630
Pulled By: ltamasi
fbshipit-source-id: 84c045ffac76436c6152fd0f5775b007f4051386
Summary:
The patch adds support for wide-column entities to the existing query
APIs (`Get`, `MultiGet`, and iterator). Namely, when during a query a
wide-column entity is encountered, we will return the value of the default
(anonymous) column as the result. Later, we plan to add wide-column
specific query APIs which will enable retrieving entire wide-column entities
or a subset of their columns.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10483
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D38441881
Pulled By: ltamasi
fbshipit-source-id: 6444e79a31aff2470e866698e3a97985bc2b3543
Summary:
Change tiered compaction feature from `bottommost_temperture` to
`last_level_temperture`. The old option is kept for migration purpose only,
which is behaving the same as `last_level_temperture` and it will be removed in
the next release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10471
Test Plan: CI
Reviewed By: siying
Differential Revision: D38450621
Pulled By: jay-zhuang
fbshipit-source-id: cc1cdf8bad409376fec0152abc0a64fb72a91527
Summary:
Current universal compaction picker may cause extra size amplification
compaction if there're more hot data on penultimate level. Improve the picker
to skip the last level for size amp calculation if tiered compaction is
enabled, which can
1. avoid extra unnecessary size amp compaction;
2. typically cold tier (the last level) is not size constrained, so skip size
amp for cold tier is intended;
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10467
Test Plan: CI and added unittest
Reviewed By: siying
Differential Revision: D38391350
Pulled By: jay-zhuang
fbshipit-source-id: 103c0731c05e0a7e8f267e9e829d022328be25d2
Summary:
Similarly to https://github.com/facebook/rocksdb/pull/10457, we now have
to explicitly set the `fill_cache` read option when reading blobs in
`DBIter` to prevent the cache from getting polluted by queries with
`fill_cache` set to false. (Before we added support for a blob cache,
the setting had not made any difference either way.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10492
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D38476121
Pulled By: ltamasi
fbshipit-source-id: ea5c5e252f83e4a4e2c74156b37d40308d7e0c80
Summary:
Local static string is not friendly to Jemalloc arena aware implementation, as it will be allocated on the arena of the first caller, which causes crash if the allocated arena gets refunded earlier.
P.S. A Jemalloc arena aware implementation is each rocksdb instance only use certain Jemalloc arenas, and arena will be refunded after associated DB instance is destroyed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8103
Reviewed By: ajkr
Differential Revision: D38477235
Pulled By: ltamasi
fbshipit-source-id: a58d32cb647ed64c144b4736fb2d5db27c2c28f9
Summary:
The feature `SuggestCompactRange()` is still experimental. Just
re-add the test back.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10473
Test Plan: CI
Reviewed By: akankshamahajan15
Differential Revision: D38427153
Pulled By: jay-zhuang
fbshipit-source-id: 0b4491c947cbce6c18ff147b167e3c678633129a
Summary:
**Context/summary:**
`ChargeFileMetadataTestWithParam/ChargeFileMetadataTestWithParam.Basic/0 ` relies on `DBImpl::BackgroundCallCompaction:PurgedObsoleteFiles` happens before verifying `EXPECT_EQ(file_metadata_charge_only_cache->GetCacheCharge(),
1 * CacheReservationManagerImpl<
CacheEntryRole::kFileMetadata>::GetDummyEntrySize());` or `EXPECT_EQ(file_metadata_charge_only_cache->GetCacheCharge(), 0);` to ensure appropriate cache reservation release is done before checking.
However, this might not be the case under some timing delay and spurious wake-up as coerced below.
```
diff --git a/db/db_impl/db_impl_compaction_flush.cc b/db/db_impl/db_impl_compaction_flush.cc
index 4378f3212..3e4f60853 100644
--- a/db/db_impl/db_impl_compaction_flush.cc
+++ b/db/db_impl/db_impl_compaction_flush.cc
@@ -2989,6 +2989,8 @@ void DBImpl::BackgroundCallCompaction(PrepickedCompaction* prepicked_compaction,
if (job_context.HaveSomethingToClean() ||
job_context.HaveSomethingToDelete() || !log_buffer.IsEmpty()) {
mutex_.Unlock();
+ bg_cv_.SignalAll();
+ usleep(1000);
// Have to flush the info logs before bg_compaction_scheduled_--
// because if bg_flush_scheduled_ becomes 0 and the lock is
// released, the deconstructor of DB can kick in and destroy all the
// states of DB so info_log might not be available after that point.
// It also applies to access other states that DB owns.
log_buffer.FlushBufferToLog();
if (job_context.HaveSomethingToDelete()) {
PurgeObsoleteFiles(job_context);
TEST_SYNC_POINT("DBImpl::BackgroundCallCompaction:PurgedObsoleteFiles");
}
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10481
Test Plan:
The test of interest failed often at the above coercion:
After fix, the test of interest passed at the above coercion:
Reviewed By: jay-zhuang
Differential Revision: D38438256
Pulled By: hx235
fbshipit-source-id: de80ecdb250174f00e7c2f5e4d952695ed56f51e
Summary:
- Right now each read fragments the memtable range tombstones https://github.com/facebook/rocksdb/issues/4808. This PR explores the idea of fragmenting memtable range tombstones in the write path and reads can just read this cached fragmented tombstone without any fragmenting cost. This PR only does the caching for immutable memtable, and does so right before a memtable is added to an immutable memtable list. The fragmentation is done without holding mutex to minimize its performance impact.
- db_bench is updated to print out the number of range deletions executed if there is any.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10380
Test Plan:
- CI, added asserts in various places to check whether a fragmented range tombstone list should have been constructed.
- Benchmark: as this PR only optimizes immutable memtable path, the number of writes in the benchmark is chosen such an immutable memtable is created and range tombstones are in that memtable.
```
single thread:
./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=1 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=100000 --max_num_range_tombstones=100
multi_thread
./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=1 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=15000 --reads=20000 --threads=32 --max_num_range_tombstones=100
```
Commit 99cdf16464a057ca44de2f747541dedf651bae9e is included in benchmark result. It was an earlier attempt where tombstones are fragmented for each write operation. Reader threads share it using a shared_ptr which would slow down multi-thread read performance as seen in benchmark results.
Results are averaged over 5 runs.
Single thread result:
| Max # tombstones | main fillrandom micros/op | 99cdf16464a057ca44de2f747541dedf651bae9e | Post PR | main readrandom micros/op | 99cdf16464a057ca44de2f747541dedf651bae9e | Post PR |
| ------------- | ------------- |------------- |------------- |------------- |------------- |------------- |
| 0 |6.68 |6.57 |6.72 |4.72 |4.79 |4.54 |
| 1 |6.67 |6.58 |6.62 |5.41 |4.74 |4.72 |
| 10 |6.59 |6.5 |6.56 |7.83 |4.69 |4.59 |
| 100 |6.62 |6.75 |6.58 |29.57 |5.04 |5.09 |
| 1000 |6.54 |6.82 |6.61 |320.33 |5.22 |5.21 |
32-thread result: note that "Max # tombstones" is per thread.
| Max # tombstones | main fillrandom micros/op | 99cdf16464a057ca44de2f747541dedf651bae9e | Post PR | main readrandom micros/op | 99cdf16464a057ca44de2f747541dedf651bae9e | Post PR |
| ------------- | ------------- |------------- |------------- |------------- |------------- |------------- |
| 0 |234.52 |260.25 |239.42 |5.06 |5.38 |5.09 |
| 1 |236.46 |262.0 |231.1 |19.57 |22.14 |5.45 |
| 10 |236.95 |263.84 |251.49 |151.73 |21.61 |5.73 |
| 100 |268.16 |296.8 |280.13 |2308.52 |22.27 |6.57 |
Reviewed By: ajkr
Differential Revision: D37916564
Pulled By: cbi42
fbshipit-source-id: 05d6d2e16df26c374c57ddcca13a5bfe9d5b731e
Summary:
This PR is the first step in enhancing the coroutines MultiGet to be able to lookup a batch in parallel across levels. By having a separate TableReader function for probing the bloom filters, we can quickly figure out which overlapping keys from a batch are definitely not in the file and can move on to the next level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10432
Reviewed By: akankshamahajan15
Differential Revision: D38245910
Pulled By: anand1976
fbshipit-source-id: 3d20db2350378c3fe6f086f0c7ba5ff01d7f04de
Summary:
Existing DBWALTest.RaceInstallFlushResultsWithWalObsoletion test relies
on a specific interleaving of two background flush threads. We call them
bg1 and bg2, and assume bg1 starts to install flush results ahead of
bg2. After bg1 enters `ProcessManifestWrites`, bg1 waits for bg2 to also
enter `MemTableList::TryInstallMemtableFlushResults()` before bg1 can
proceed with MANIFEST write. However, if bg2 called `SyncClosedLogs()`
and needed to commit to the MANIFEST but falls behind bg1, then bg2
needs to wait for bg1 to finish writing to MANIFEST. This is a circular
dependency.
Fix this by allowing bg2 to start only after bg1 grabs the chance to
sync the WAL and commit to MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10456
Test Plan:
1. make check
2. export TEST_TMPDIR=/dev/shm && gtest-parallel -r 1000 -w 32 ./db_wal_test --gtest_filter=DBWALTest.RaceInstallFlushResultsWithWalObsoletion
Reviewed By: ltamasi
Differential Revision: D38391856
Pulled By: riversand963
fbshipit-source-id: 55f647d5b94e534c008a4dd2fb082675ddf58c96
Summary:
This PR avoids allocations and copies for the result of `GetMergeOperands()` when the average operand size is at least 256 bytes and the total operands size is at least 32KB. The `GetMergeOperands()` already included `PinnableSlice` but was calling `PinSelf()` (i.e., allocating and copying) for each operand. When this optimization takes effect, we instead call `PinSlice()` to skip that allocation and copy. Resources are pinned in order for the `PinnableSlice` to point to valid memory even after `GetMergeOperands()` returns.
The pinned resources include a referenced `SuperVersion`, a `MergingContext`, and a `PinnedIteratorsManager`. They are bundled into a `GetMergeOperandsState`. We use `SharedCleanablePtr` to share that bundle among all `PinnableSlice`s populated by `GetMergeOperands()`. That way, the last `PinnableSlice` to be `Reset()` will cleanup the bundle, including unreferencing the `SuperVersion`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10458
Test Plan:
- new DB level test
- measured benefit/regression in a number of memtable scenarios
Setup command:
```
$ ./db_bench -benchmarks=mergerandom -merge_operator=StringAppendOperator -num=$num -writes=16384 -key_size=16 -value_size=$value_sz -compression_type=none -write_buffer_size=1048576000
```
Benchmark command:
```
./db_bench -threads=$threads -use_existing_db=true -avoid_flush_during_recovery=true -write_buffer_size=1048576000 -benchmarks=readrandomoperands -merge_operator=StringAppendOperator -num=$num -duration=10
```
Worst regression is when a key has many tiny operands:
- Parameters: num=1 (implying 16384 operands per key), value_sz=8, threads=1
- `GetMergeOperands()` latency increases 682 micros -> 800 micros (+17%)
The regression disappears into the noise (<1% difference) if we remove the `Reset()` loop and the size counting loop. The former is arguably needed regardless of this PR as the convention in `Get()` and `MultiGet()` is to `Reset()` the input `PinnableSlice`s at the start. The latter could be optimized to count the size as we accumulate operands rather than after the fact.
Best improvement is when a key has large operands and high concurrency:
- Parameters: num=4 (implying 4096 operands per key), value_sz=2KB, threads=32
- `GetMergeOperands()` latency decreases 11492 micros -> 437 micros (-96%).
Reviewed By: cbi42
Differential Revision: D38336578
Pulled By: ajkr
fbshipit-source-id: 48146d127e04cb7f2d4d2939a2b9dff3aba18258
Summary:
Resolves https://github.com/facebook/rocksdb/issues/9692
This PR adds a unit test that reproduces the race described in https://github.com/facebook/rocksdb/issues/9692 and an according fix.
The unit test does not have any assertions, because I could not find a reliable and save way to assert that the writers list does not form a cycle. So with the old (buggy) code, the test would simply hang, while with the fix the test passes successfully.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9944
Reviewed By: pdillinger
Differential Revision: D36134604
Pulled By: riversand963
fbshipit-source-id: ef636c5a79ddbef18658ab2f19ca9210a427324a
Summary:
TL;DR: due to a recent change, if you drop a column family,
often that DB will no longer fsync after writing new SST files
to remaining or new column families, which could lead to data
loss on power loss.
More bug detail:
The intent of https://github.com/facebook/rocksdb/issues/10049 was to Close FSDirectory objects at
DB::Close time rather than waiting for DB object destruction.
Unfortunately, it also closes shared FSDirectory objects on
DropColumnFamily (& destroy remaining handles), which can lead
to use-after-Close on FSDirectory shared with remaining column
families. Those "uses" are only Fsyncs (or redundant Closes). In
the default Posix filesystem, an Fsync on a closed FSDirectory is a
quiet no-op. Consequently (under most configurations), if you drop
a column family, that DB will no longer fsync after writing new SST
files to column families sharing the same directory (true under most
configurations).
More fix detail:
Basically, this removes unnecessary Close ops on destroying
ColumnFamilyData. We let `shared_ptr` take care of calling the
destructor at the right time. If the intent was to require Close be
called before destroying FSDirectory, that was not made clear by the
author of FileSystem and was not at all enforced by https://github.com/facebook/rocksdb/issues/10049, which
could have added `assert(fd_ == -1)` to `~PosixDirectory()` but did
not. To keep this fix simple, we relax the unit test for https://github.com/facebook/rocksdb/issues/10049 to allow
timely destruction of FSDirectory to suffice as Close (in
CountedFileSystem). Added a TODO to revisit that.
Also in this PR:
* Added a TODO to share FSDirectory instances between DB and its column
families. (Already shared among column families.)
* Made DB::Close attempt to close all its open FSDirectory objects even
if there is a failure in closing one. Also code clean-up around this
logic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10460
Test Plan:
add an assert to check for use-after-Close. With that
existing tests can detect the misuse. With fix, tests pass (except noted
relaxing of unit test for https://github.com/facebook/rocksdb/issues/10049)
Reviewed By: ajkr
Differential Revision: D38357922
Pulled By: pdillinger
fbshipit-source-id: d42079cadbedf0a969f03389bf586b3b4e1f9137
Summary:
During compaction, blobs are currently read using the default
`ReadOptions`, which has the `fill_cache` flag set to true. Earlier,
this didn't make any difference since we didn't have a blob cache;
however, now we have to explicitly set this flag to false to avoid
polluting the cache during compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10457
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D38333528
Pulled By: ltamasi
fbshipit-source-id: 5b4d49a1e39543bee73c7df2aa9194fb101875e2
Changyu Bi