Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
Current `log::Reader` does not perform retry after encountering `EOF`. In the future, we need the log reader to be able to retry tailing the log even after `EOF`.
Current implementation is simple. It does not provide more advanced retry policies. Will address this in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4394
Differential Revision: D9926508
Pulled By: riversand963
fbshipit-source-id: d86d145792a41bd64a72f642a2a08c7b7b5201e1
Summary:
The code is dead in RocksDB as `log::Reader::initial_offset_` is always zero. We should delete it so we don't have to maintain it like in #4359.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4362
Differential Revision: D9817829
Pulled By: ajkr
fbshipit-source-id: 474a2c679e5bd273b40608f3a5332931d9eefe6d
Summary: Grandfather in super old lint issues to make a clean slate for moving forward that allows us to have stronger enforcement on new issues.
Reviewed By: yiwu-arbug
Differential Revision: D6821806
fbshipit-source-id: 22797d31ec58e9eb0255d3b66fedfcfcb0dc127c
If we are in kTolerateCorruptedTailRecords, treat these
errors as the end of the log. This is particularly
important for recycled logs, where we will regularly see
corrupted headers (bad length or checksum) when replaying
a log. If we are aligned with a block boundary or get lucky,
we will land on an old header and see the log number
mismatch, but more commonly we will land midway through
some previous block and record and effectively see noise.
These must be treated as the end of the log in order for
recycling to work.
This makes the LogTest.Recycle/1 test pass.
We also modify a number of existing tests because the
recycled log files behave fundamentally differently in that
they always stop when they reach the first bad record.
Signed-off-by: Sage Weil <sage@redhat.com>
Introduce new tags for records that have a log_number. This changes the
header size from 7 to 11 for these records, making this a
backward-incompatible change.
If we read a record that belongs to a different log_number (i.e., a
previous instantiation of this log file, before it was most recently
recycled), we return kOldRecord from ReadPhysicalRecord. ReadRecord
will translate this into a kEof or kBadRecord depending on what the
WAL recovery mode is.
We make several adjustments to the log_test.cc tests to compensate for the
fact that the header size varies between the two modes.
Signed-off-by: Sage Weil <sage@redhat.com>
Move the WAL recovery mode logic out of ReadPhysicalRecord. To do this we
introduce a new type indicating when we fail to read a valid header.
Signed-off-by: Sage Weil <sage@redhat.com>
We will need the log number to validate the recycle-style CRCs. The log
is helpful for debugging, but optional, as not all callers have it.
Signed-off-by: Sage Weil <sage@redhat.com>
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
Summary:
The "one size fits all" approach with WAL recovery will only introduce inconvenience for our varied clients as we go forward. The current recovery is a bit heuristic. We introduce the following levels of consistency while replaying the WAL.
1. RecoverAfterRestart (kTolerateCorruptedTailRecords)
This mocks the current recovery mode.
2. RecoverAfterCleanShutdown (kAbsoluteConsistency)
This is ideal for unit test and cases where the store is shutdown cleanly. We tolerate no corruption or incomplete writes.
3. RecoverPointInTime (kPointInTimeRecovery)
This is ideal when using devices with controller cache or file systems which can loose data on restart. We recover upto the point were is no corruption or incomplete write.
4. RecoverAfterDisaster (kSkipAnyCorruptRecord)
This is ideal mode to recover data. We tolerate corruption and incomplete writes, and we hop over those sections that we cannot make sense of salvaging as many records as possible.
Test Plan:
(1) Run added unit test to cover all levels.
(2) Run make check.
Reviewers: leveldb, sdong, igor
Subscribers: yoshinorim, dhruba
Differential Revision: https://reviews.facebook.net/D38487
Summary:
Blocks in the transaction log are a fixed size, but the last block in the transaction log file is usually a partial block. When a new record is added after the reader hit the end of the file, a new physical record will be appended to the last block. ReadPhysicalRecord can only read full blocks and assumes that the file position indicator is aligned to the start of a block. If the reader is forced to read further by simply clearing the EOF flag, ReadPhysicalRecord will read a full block starting from somewhere in the middle of a real block, causing it to lose alignment and to have a partial physical record at the end of the read buffer. This will result in length mismatches and checksum failures. When the log file is tailed for replication this will cause the log iterator to become invalid, necessitating the creation of a new iterator which will have to read the log file from scratch.
This diff fixes this issue by reading the remaining portion of the last block we read from. This is done when the reader is forced to read further (UnmarkEOF is called).
Test Plan:
- Added unit tests
- Stress test (with replication). Check dbdir/LOG file for corruptions.
- Test on test tier
Reviewers: emayanke, haobo, dhruba
Reviewed By: haobo
CC: vamsi, sheki, dhruba, kailiu, igor
Differential Revision: https://reviews.facebook.net/D15249
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.
Test Plan: compile rocksdb
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13287
Summary: Replace include/leveldb with include/rocksdb.
Test Plan:
make clean; make check
make clean; make release
Differential Revision: https://reviews.facebook.net/D12489
Summary:
* Add a method to check if the log reader is at EOF.
* If we know a record has been flushed force the log_reader to believe it is not at EOF, using a new method UnMarkEof().
This does not work with MMpaed files.
Test Plan: added a unit test.
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9567
Summary:
Replace manual memory management with std::unique_ptr in a
number of places; not exhaustive, but this fixes a few leaks with file
handles as well as clarifies semantics of the ownership of file handles
with log classes.
Test Plan: db_stress, make check
Reviewers: dhruba
Reviewed By: dhruba
CC: zshao, leveldb, heyongqiang
Differential Revision: https://reviews.facebook.net/D8043
- Replace raw slice comparison with a call to user comparator.
Added test for custom comparators.
- Fix end of namespace comments.
- Fixed bug in picking inputs for a level-0 compaction.
When finding overlapping files, the covered range may expand
as files are added to the input set. We now correctly expand
the range when this happens instead of continuing to use the
old range. For example, suppose L0 contains files with the
following ranges:
F1: a .. d
F2: c .. g
F3: f .. j
and the initial compaction target is F3. We used to search
for range f..j which yielded {F2,F3}. However we now expand
the range as soon as another file is added. In this case,
when F2 is added, we expand the range to c..j and restart the
search. That picks up file F1 as well.
This change fixes a bug related to deleted keys showing up
incorrectly after a compaction as described in Issue 44.
(Sync with upstream @25072954)
Sagar Vemuri