Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9105
The user contract of SingleDelete is that: a SingleDelete can only be issued to
a key that exists and has NOT been updated. For example, application can insert
one key `key`, and uses a SingleDelete to delete it in the future. The `key`
cannot be updated or removed using Delete.
In reality, especially when write-prepared transaction is being used, things
can get tricky. For example, a prepared transaction already writes `key` to the
memtable after a successful Prepare(). Afterwards, should the transaction
rollback, it will insert a Delete into the memtable to cancel out the prior
Put. Consider the following sequence of operations.
```
// operation sequence 1
Begin txn
Put(key)
Prepare()
Flush()
Rollback txn
Flush()
```
There will be two SSTs resulting from above. One of the contains a PUT, while
the second one contains a Delete. It is also known that releasing a snapshot
can lead to an L0 containing only a SD for a particular key. Consider the
following operations following the above block.
```
// operation sequence 2
db->Put(key)
db->SingleDelete(key)
Flush()
```
The operation sequence 2 can result in an L0 with only the SD.
Should there be a snapshot for conflict checking created before operation
sequence 1, then an attempt to compact the db may hit the assertion failure
below, because ikey_.type is Delete (from a rollback).
```
else if (clear_and_output_next_key_) {
assert(ikey_.type == kTypeValue || ikey_.type == kTypeBlobIndex);
}
```
To fix the assertion failure, we can skip the SingleDelete if we detect an
earlier Delete in the same snapshot interval.
Reviewed By: ltamasi
Differential Revision: D32056848
fbshipit-source-id: 23620a91e28562d91c45cf7e95f414b54b729748
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9060
RocksDB bottommost level compaction may zero out an internal key's sequence if
the key's sequence is in the earliest_snapshot.
In write-prepared transaction, checking the visibility of a certain sequence in
a specific released snapshot may return a "snapshot released" result.
Therefore, it is possible, after a certain sequence of events, a PUT has its
sequence zeroed out, but a subsequent SingleDelete of the same key will still
be output with its original sequence. This violates the ascending order of
keys and leads to incorrect result.
The solution is to use an extra variable `last_key_seq_zeroed_` to track the
information about visibility in earliest snapshot. With this variable, we can
know for sure that a SingleDelete is in the earliest snapshot even if the said
snapshot is released during compaction before processing the SD.
Reviewed By: ltamasi
Differential Revision: D31813016
fbshipit-source-id: d8cff59d6f34e0bdf282614034aaea99be9174e1
Summary:
Directory fsync might be expensive on btrfs and it may not be needed.
Here are 4 directory fsync cases:
1. creating a new file: dir-fsync is not needed on btrfs, as long as the
new file itself is synced.
2. renaming a file: dir-fsync is not needed if the renamed file is
synced. So an API `FsyncAfterFileRename(filename, ...)` is provided
to sync the file on btrfs. By default, it just calls dir-fsync.
3. deleting files: dir-fsync is forced by set
`IOOptions.force_dir_fsync = true`
4. renaming multiple files (like backup and checkpoint): dir-fsync is
forced, the same as above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8903
Test Plan: run tests on btrfs and non btrfs
Reviewed By: ajkr
Differential Revision: D30885059
Pulled By: jay-zhuang
fbshipit-source-id: dd2730b31580b0bcaedffc318a762d7dbf25de4a
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9061
In write-prepared txn, checking a sequence's visibility in a released (old)
snapshot may return "Snapshot released". Suppose we have two snapshots:
```
earliest_snap < earliest_write_conflict_snap
```
If we release `earliest_write_conflict_snap` but keep `earliest_snap` during
bottommost level compaction, then it is possible that certain sequence of
events can lead to a PUT being seq-zeroed followed by a SingleDelete of the
same key. This violates the ascending order of keys, and will cause data
inconsistency.
Reviewed By: ltamasi
Differential Revision: D31813017
fbshipit-source-id: dc68ba2541d1228489b93cf3edda5f37ed06f285
Summary:
This feature was not part of any common or CI build, so no
surprise it broke. Now we can at least ensure compilation. I don't know
how to run the test successfully (missing config file) so it is bypassed
for now.
Fixes https://github.com/facebook/rocksdb/issues/9078
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9088
Test Plan: CI
Reviewed By: mrambacher
Differential Revision: D32009467
Pulled By: pdillinger
fbshipit-source-id: 3e0d1e5fde7f0ece703d48a81479e1cc7392c25c
Summary:
This PR adds support for building on s390x including updating travis CI. It uses the previous work in https://github.com/facebook/rocksdb/pull/6168 and adds some more changes to get all current tests (make check and jni tests) to pass. The tests were run with snappy, lz4, bzip2 and zstd all compiled in.
There are a few pieces still needed to get the travis build working that I don't think I can do. adamretter is this something you could help with?
1. A prebuilt https://rocksdb-deps.s3-us-west-2.amazonaws.com/cmake/cmake-3.14.5-Linux-s390x.deb package
2. A https://hub.docker.com/r/evolvedbinary/rocksjava s390x image
Not sure if there is more required for travis. Happy to help in any way I can.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8962
Reviewed By: mrambacher
Differential Revision: D31802198
Pulled By: pdillinger
fbshipit-source-id: 683511466fa6b505f85ba5a9964a268c6151f0c2
Summary:
New classes FileStorageInfo and LiveFileStorageInfo and
'experimental' function DB::GetLiveFilesStorageInfo, which is intended
to largely replace several fragmented DB functions needed to create
checkpoints and backups.
This function is now used to create checkpoints and backups, because
it fixes many (probably not all) of the prior complexities of checkpoint
not having atomic access to DB metadata. This also ensures strong
functional test coverage of the new API. Specifically, much of the old
CheckpointImpl::CreateCustomCheckpoint has been migrated to and
updated in DBImpl::GetLiveFilesStorageInfo, with the former now
calling the latter.
Also, the class FileStorageInfo in metadata.h compatibly replaces
BackupFileInfo and serves as a new base class for SstFileMetaData.
Some old fields of SstFileMetaData are still provided (for now) but
deprecated.
Although FileStorageInfo::directory is accurate when using db_paths
and/or cf_paths, these have never been supported by Checkpoint
nor BackupEngine and still are not. This change does now detect
these cases and return NotSupported when appropriate. (More work
needed for support.)
Somehow this change broke ProgressCallbackDuringBackup, but
the progress_callback logic was dubious to begin with because it
would call the callback based on copy buffer size, not size actually
copied. Logic and test updated to track size actually copied
per-thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8968
Test Plan:
tests updated.
DB::GetLiveFilesStorageInfo mostly tested by use in CheckpointImpl.
DBTest.SnapshotFiles updated to also test GetLiveFilesStorageInfo,
including reading the data after DB close.
Added CheckpointTest.CheckpointWithDbPath (NotSupported).
Reviewed By: siying
Differential Revision: D31242045
Pulled By: pdillinger
fbshipit-source-id: b183d1ce9799e220daaefd6b3b5365d98de676c0
Summary:
`FaultInjectionTest{Env,FS}::ReopenWritableFile()` functions were accidentally deleting WALs from previous `db_stress` runs causing verification to fail. They were operating under the assumption that `ReopenWritableFile()` would delete any existing file. It was a reasonable assumption considering the `{Env,FileSystem}::ReopenWritableFile()` documentation stated that would happen. The only problem was neither the implementations we offer nor the "real" clients in RocksDB code followed that contract. So, this PR updates the contract as well as fixing the fault injection client usage.
The fault injection change exposed that `ExternalSSTFileBasicTest.SyncFailure` was relying on a fault injection `Env` dropping unsynced data written by a regular `Env`. I changed that test to make its `SstFileWriter` use fault injection `Env`, and also implemented `LinkFile()` in fault injection so the unsynced data is tracked under the new name.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8995
Test Plan:
- Verified it fixes the following failure:
```
$ ./db_stress --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/rocksdb_crashtest_whitebox --delpercent=5 --expected_values_dir=/dev/shm/rocksdb_crashtest_expected --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=100000 --max_key_len=3 --nooverwritepercent=1 --ops_per_thread=1000 --prefixpercent=0 --readpercent=60 --reopen=0 --target_file_size_base=1048576 --test_batches_snapshots=0 --write_buffer_size=1048576 --writepercent=35 --value_size_mult=33 -threads=1
...
$ ./db_stress --avoid_flush_during_recovery=1 --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/rocksdb_crashtest_whitebox --delpercent=5 --destroy_db_initially=0 --expected_values_dir=/dev/shm/rocksdb_crashtest_expected --iterpercent=10 --key_len_percent_dist=1,30,69 --max_bytes_for_level_base=4194304 --max_key=100000 --max_key_len=3 --nooverwritepercent=1 --open_files=-1 --open_metadata_write_fault_one_in=8 --open_write_fault_one_in=16 --ops_per_thread=1000 --prefix_size=-1 --prefixpercent=0 --readpercent=50 --sync=1 --target_file_size_base=1048576 --test_batches_snapshots=0 --write_buffer_size=1048576 --writepercent=35 --value_size_mult=33 -threads=1
...
Verification failed for column family 0 key 000000000000001300000000000000857878787878 (1143): Value not found: NotFound:
Crash-recovery verification failed :(
...
```
- `make check -j48`
Reviewed By: ltamasi
Differential Revision: D31495388
Pulled By: ajkr
fbshipit-source-id: 7886ccb6a07cb8b78ad7b6c1c341ccf40bb68385
Summary:
Background: Cache warming up will cause potential read performance degradation due to reading blocks from storage to the block cache. Since in production, the workload and access pattern to a certain DB is stable, it is a potential solution to dump out the blocks belonging to a certain DB to persist storage (e.g., to a file) and bulk-load the blocks to Secondary cache before the DB is relaunched. For example, when migrating a DB form host A to host B, it will take a short period of time, the access pattern to blocks in the block cache will not change much. It is efficient to dump out the blocks of certain DB, migrate to the destination host and insert them to the Secondary cache before we relaunch the DB.
Design: we introduce the interface of CacheDumpWriter and CacheDumpRead for user to store the blocks dumped out from block cache. RocksDB will encode all the information and send the string to the writer. User can implement their own writer it they want. CacheDumper and CacheLoad are introduced to save the blocks and load the blocks respectively.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8912
Test Plan: add new tests to lru_cache_test and pass make check.
Reviewed By: pdillinger
Differential Revision: D31452871
Pulled By: zhichao-cao
fbshipit-source-id: 11ab4f5d03e383f476947116361d54188d36ec48
Summary:
This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead.
Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing.
Hopefully, this sort of code hygiene cleanup will speed up the builds...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930
Reviewed By: pdillinger
Differential Revision: D31142788
Pulled By: mrambacher
fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d
Summary:
Right now FaultInjectionTestFS::InjectThreadSpecificReadError() might try to corrupt return bytes, but these bytes might be from mmapped files, which would cause segfault. Instead FaultInjectionTestFS::InjectThreadSpecificReadError() should never corrupt data unless it is in caller's buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8952
Test Plan: See db_stress still runs and make sure in a test run failurs are still injected in non-mmap cases.
Reviewed By: ajkr, ltamasi
Differential Revision: D31147318
fbshipit-source-id: 9484a64ff2aaa36685557203f449286e694e65f9
Summary:
There is a corner case when using WriteUnprepared transactions when
`WriteUnpreparedTxn::Get` returns `Status::TryAgain` instead of
propagating the result of `GetFromBatchAndDB`. The patch adds
`PermitUncheckedError` to make the `ASSERT_STATUS_CHECKED` build pass in
this case as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8947
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D31125422
Pulled By: ltamasi
fbshipit-source-id: 42de51dcfa9384e032244c2b4d3f40e9a4111194
Summary:
Several improvements to MultiRead:
1. Fix a bug in stress test which causes false positive when both MultiRead() return and individual read request have failure injected.
2. Add two more types of fault that should be handled: empty read results and checksum mismatch
3. Add a message indicating which type of fault is injected
4. Increase the failure rate
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8937
Reviewed By: anand1976
Differential Revision: D31085930
fbshipit-source-id: 3a04994a3cadebf9a64d25e1fe12b14b7a272fba
Summary:
Updates a few remaining functions that should have been updated
from Status -> IOStatus, and adds to HISTORY for the overall change
including https://github.com/facebook/rocksdb/issues/8820.
This change is for inclusion in version 6.25.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8940
Test Plan: CI
Reviewed By: zhichao-cao
Differential Revision: D31085029
Pulled By: pdillinger
fbshipit-source-id: 91557c6a39ef1d90357d4f4dcd79af0645d87c7b
Summary:
Right now, the failure injection test for MultiGet() is not sufficient. Improve it with TestFSRandomAccessFile::MultiRead() injecting failures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8925
Test Plan: Run crash test locally for a while.
Reviewed By: anand1976
Differential Revision: D31000529
fbshipit-source-id: 439c7e02cf7440ac5af82deb609e202abdca3e1f
Summary:
In order to populate the IOStatus up to the higher level, replace some of the Status to IOStatus.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8820
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D30967215
Pulled By: zhichao-cao
fbshipit-source-id: ccf9d5cfbd9d3de047c464aaa85f9fa43b474903
Summary:
This allows the wrapper classes to own the wrapped object and eliminates confusion as to ownership. Previously, many classes implemented their own ownership solutions. Fixes https://github.com/facebook/rocksdb/issues/8606
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8618
Reviewed By: pdillinger
Differential Revision: D30136064
Pulled By: mrambacher
fbshipit-source-id: d0bf471df8818dbb1770a86335fe98f761cca193
Summary:
It's always annoying to find a header does not include its own
dependencies and only works when included after other includes. This
change adds `make check-headers` which validates that each header can
be included at the top of a file. Some headers are excluded e.g. because
of platform or external dependencies.
rocksdb_namespace.h had to be re-worked slightly to enable checking for
failure to include it. (ROCKSDB_NAMESPACE is a valid namespace name.)
Fixes mostly involve adding and cleaning up #includes, but for
FileTraceWriter, a constructor was out-of-lined to make a forward
declaration sufficient.
This check is not currently run with `make check` but is added to
CircleCI build-linux-unity since that one is already relatively fast.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8893
Test Plan: existing tests and resolving issues detected by new check
Reviewed By: mrambacher
Differential Revision: D30823300
Pulled By: pdillinger
fbshipit-source-id: 9fff223944994c83c105e2e6496d24845dc8e572
Summary:
ManagedObjects are shared pointer objects where RocksDB wants to share a single object between multiple configurations. For example, the Cache may be shared between multiple column families/tables or the Statistics may be shared between multiple databases.
ManagedObjects are stored in the ObjectRegistry by Type (e.g. Cache) and ID. For a given type/ID name, a single object is stored.
APIs were added to get/set/create these objects.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8658
Reviewed By: pdillinger
Differential Revision: D30806273
Pulled By: mrambacher
fbshipit-source-id: 832ac4423b210c4c4b4a456b35897334775d3160
Summary:
Context:
While all the non-trivial write operations in BackupEngine go through the RateLimiter, reads currently do not. In general, this is not a huge issue because (especially since some I/O efficiency fixes) reads in BackupEngine are mostly limited by corresponding writes, for both backup and restore. But in principle we should charge the RateLimiter for reads as well.
- Charged read operations in `BackupEngineImpl::CopyOrCreateFile`, `BackupEngineImpl::ReadFileAndComputeChecksum`, `BackupEngineImpl::BackupMeta::LoadFromFile` and `BackupEngineImpl::GetFileDbIdentities`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8722
Test Plan:
- Passed existing tests
- Passed added unit tests
Reviewed By: pdillinger
Differential Revision: D30610464
Pulled By: hx235
fbshipit-source-id: 9b08c9387159a5385c8d390d6666377a0d0117e5
Summary:
A "LATEST_BACKUP" file was left in the backup directory by
"BackupEngineTest.NoDeleteWithReadOnly" test, affecting future test
runs. In particular, it caused "BackupEngineTest.IOStats" to fail since
it relies on backup directory containing only data written by its
`BackupEngine`.
The fix is to promote "LATEST_BACKUP" to an explicitly managed file so
it is deleted in `BackupEngineTest` constructor if it exists.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8887
Test Plan:
below command used to fail. Now it passes:
```
$ TEST_TMPDIR=/dev/shm ./backupable_db_test --gtest_filter='BackupEngineTest.NoDeleteWithReadOnly:BackupEngineTest.IOStats'
```
Reviewed By: pdillinger
Differential Revision: D30812336
Pulled By: ajkr
fbshipit-source-id: 32dfbe1368ebdab872e610764bfea5daf9a2af09
Summary:
Gets `Statistics` from the options associated with the `DB` undergoing backup, and populates new ticker stats with the thread-local `IOContext` read/write counters for the threads doing backup work.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8819
Reviewed By: pdillinger
Differential Revision: D30779238
Pulled By: ajkr
fbshipit-source-id: 75ccafc355f90906df5cf80367f7245b985772d8
Summary:
* Consolidate use of std::regex for testing to testharness.cc, to
minimize Facebook linters constantly flagging uses in non-production
code.
* Improve syntax and error messages for asserting some string matches a
regex in tests.
* Add a public Regex wrapper class to encapsulate existing usage in
ObjectRegistry.
* Remove unnecessary include <regex>
* Put warnings that use of Regex in production code could cause bad
performance or stack overflow.
Intended follow-up work:
* Replace std::regex with another underlying implementation like RE2
* Improve ObjectRegistry interface in terms of possibly confusing literal
string matching vs. regex and in terms of reporting invalid regex.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8740
Test Plan:
tests updated, basic unit test for public Regex, and some manual
testing of temporary changes to see example error messages:
utilities/backupable/backupable_db_test.cc:917: Failure
000010_1162373755_138626.blob (child.name)
does not match regex
[0-9]+_[0-9]+_[0-9]+[.]blobHAHAHA (pattern)
db/db_basic_test.cc:74: Failure
R3SHSBA8C4U0CIMV2ZB0 (sid3)
does not match regex [0-9A-Z]{20}HAHAHA
Reviewed By: mrambacher
Differential Revision: D30706246
Pulled By: pdillinger
fbshipit-source-id: ba845e8f563ccad39bdb58f44f04e9da8f78c3fd
Summary:
Old typedef syntax is confusing
Most but not all changes with
perl -pi -e 's/typedef (.*) ([a-zA-Z0-9_]+);/using $2 = $1;/g' list_of_files
make format
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8751
Test Plan: existing
Reviewed By: zhichao-cao
Differential Revision: D30745277
Pulled By: pdillinger
fbshipit-source-id: 6f65f0631c3563382d43347896020413cc2366d9
Summary:
If RateLimiter burst bytes changes during concurrent Restore
operations
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8732
Test Plan: updated unit test fails with TSAN before change, passes after
Reviewed By: ajkr
Differential Revision: D30683879
Pulled By: pdillinger
fbshipit-source-id: d0ddb3587ade91ee2a4d926b475acf7781b03086
Summary:
Env::GenerateUniqueId() works fine on Windows and on POSIX
where /proc/sys/kernel/random/uuid exists. Our other implementation is
flawed and easily produces collision in a new multi-threaded test.
As we rely more heavily on DB session ID uniqueness, this becomes a
serious issue.
This change combines several individually suitable entropy sources
for reliable generation of random unique IDs, with goal of uniqueness
and portability, not cryptographic strength nor maximum speed.
Specifically:
* Moves code for getting UUIDs from the OS to port::GenerateRfcUuid
rather than in Env implementation details. Callers are now told whether
the operation fails or succeeds.
* Adds an internal API GenerateRawUniqueId for generating high-quality
128-bit unique identifiers, by combining entropy from three "tracks":
* Lots of info from default Env like time, process id, and hostname.
* std::random_device
* port::GenerateRfcUuid (when working)
* Built-in implementations of Env::GenerateUniqueId() will now always
produce an RFC 4122 UUID string, either from platform-specific API or
by converting the output of GenerateRawUniqueId.
DB session IDs now use GenerateRawUniqueId while DB IDs (not as
critical) try to use port::GenerateRfcUuid but fall back on
GenerateRawUniqueId with conversion to an RFC 4122 UUID.
GenerateRawUniqueId is declared and defined under env/ rather than util/
or even port/ because of the Env dependency.
Likely follow-up: enhance GenerateRawUniqueId to be faster after the
first call and to guarantee uniqueness within the lifetime of a single
process (imparting the same property onto DB session IDs).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8708
Test Plan:
A new mini-stress test in env_test checks the various public
and internal APIs for uniqueness, including each track of
GenerateRawUniqueId individually. We can't hope to verify anywhere close
to 128 bits of entropy, but it can at least detect flaws as bad as the
old code. Serial execution of the new tests takes about 350 ms on
my machine.
Reviewed By: zhichao-cao, mrambacher
Differential Revision: D30563780
Pulled By: pdillinger
fbshipit-source-id: de4c9ff4b2f581cf784fcedb5f39f16e5185c364
Summary:
`Replayer::Execute()` can directly returns the result (e.g, request latency, DB::Get() return code, returned value, etc.)
`Replayer::Replay()` reports the results via a callback function.
New interface:
`TraceRecordResult` in "rocksdb/trace_record_result.h".
`DBTest2.TraceAndReplay` and `DBTest2.TraceAndManualReplay` are updated accordingly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8657
Reviewed By: ajkr
Differential Revision: D30290216
Pulled By: autopear
fbshipit-source-id: 3c8d4e6b180ec743de1a9d9dcaee86064c74f0d6
Summary:
In debug mode, we are seeing assertion failure as follows
```
db/compaction/compaction_iterator.cc:980: void rocksdb::CompactionIterator::PrepareOutput(): \
Assertion `ikey_.type != kTypeDeletion && ikey_.type != kTypeSingleDeletion' failed.
```
It is caused by releasing earliest snapshot during compaction between the execution of
`NextFromInput()` and `PrepareOutput()`.
In one case, as demonstrated in unit test `WritePreparedTransaction.ReleaseEarliestSnapshotDuringCompaction_WithSD2`,
incorrect result may be returned by a following range scan if we disable assertion, as in opt compilation
level: the SingleDelete marker's sequence number is zeroed out, but the preceding PUT is also
outputted to the SST file after compaction. Due to the logic of DBIter, the PUT will not be
skipped and will be returned by iterator in range scan. https://github.com/facebook/rocksdb/issues/8661 illustrates what happened.
Fix by taking a more conservative approach: make compaction zero out sequence number only
if key is in the earliest snapshot when the compaction starts.
Another assertion failure is
```
Assertion `current_user_key_snapshot_ == last_snapshot' failed.
```
It's caused by releasing the snapshot between the PUT and SingleDelete during compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8608
Test Plan: make check
Reviewed By: jay-zhuang
Differential Revision: D30145645
Pulled By: riversand963
fbshipit-source-id: 699f58e66faf70732ad53810ccef43935d3bbe81
Summary:
- Remove extra `;` in trace_record.h
- Remove some unnecessary `assert` in trace_record_handler.cc
- Initialize `env_` after` exec_handler_` in `ReplayerImpl` to let db be asserted in creating the handler before getting `db->GetEnv()`.
- Update history to include the new `TraceReader::Reset()`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8652
Reviewed By: ajkr
Differential Revision: D30276872
Pulled By: autopear
fbshipit-source-id: 476ee162e0f241490c6209307448343a5b326b37
Summary:
New public interfaces:
`TraceRecord` and `TraceRecord::Handler`, available in "rocksdb/trace_record.h".
`Replayer`, available in `rocksdb/utilities/replayer.h`.
User can use `DB::NewDefaultReplayer()` to create a Replayer to auto/manual replay a trace file.
Unit tests:
- `./db_test2 --gtest_filter="DBTest2.TraceAndReplay"`: Updated with the internal API changes.
- `./db_test2 --gtest_filter="DBTest2.TraceAndManualReplay"`: New for manual replay.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8611
Reviewed By: ajkr
Differential Revision: D30266329
Pulled By: autopear
fbshipit-source-id: 1ecb3cbbedae0f6a67c18f0cc82e002b4d81b6f8
Summary:
Guarantees that if a restore is interrupted, DB::Open will fail. This works by
restoring CURRENT first to CURRENT.tmp then as a final step renaming to CURRENT.
Also makes restore respect BackupEngineOptions::sync (default true). When set,
the restore is guaranteed persisted by the time it returns OK. Also makes the above
atomicity guarantee work in case the interruption is power loss or OS crash (not just
process interruption or crash).
Fixes https://github.com/facebook/rocksdb/issues/8500
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8568
Test Plan:
added to backup mini-stress unit test. Passes with
gtest_repeat=100 (whereas fails 7 times without the CURRENT.tmp)
Reviewed By: akankshamahajan15
Differential Revision: D29812605
Pulled By: pdillinger
fbshipit-source-id: 24e9a993b305b1835ca95558fa7a7152e54cda8e
Summary:
- Changed MergeOperator, CompactionFilter, and CompactionFilterFactory into Customizable classes.
- Added Options/Configurable/Object Registration for TTL and Cassandra variants
- Changed the StringAppend MergeOperators to accept a string delimiter rather than a simple char. Made the delimiter into a configurable option
- Added tests for new functionality
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8481
Reviewed By: zhichao-cao
Differential Revision: D30136050
Pulled By: mrambacher
fbshipit-source-id: 271d1772835935b6773abaf018ee71e42f9491af
Summary:
```FaultInjectionTestFS``` injects various types of read errors in ```FileSystem``` APIs. One type of error is corruption errors, where data is intentionally corrupted or truncated. There is corresponding validation in db_stress to verify that an injected error results in a user visible Get/MultiGet error. However, for corruption errors, its hard to know when a corruption is supposed to be detected by the user request, due to prefetching and, in case of direct IO, padding. This results in false positives. So remove that functionality.
Block checksum validation for Get/MultiGet is confined to ```BlockFetcher```, so we don't lose a lot by disabling this since its a small surface area to test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8616
Reviewed By: zhichao-cao
Differential Revision: D30074422
Pulled By: anand1976
fbshipit-source-id: 6a61fac18f95514c15364b75013799ddf83294df
Summary:
An arbitrary string can be used as a delimiter in StringAppend merge operator
flavor. In particular, it allows using an empty string, combining binary values for
the same key byte-to-byte one next to another.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8536
Reviewed By: mrambacher
Differential Revision: D29962120
Pulled By: zhichao-cao
fbshipit-source-id: 4ef5d846a47835cf428a11200409e30e2dbffc4f
Summary:
Prior to this change, the "wal_dir" DBOption would always be set (defaults to dbname) when the DBOptions were sanitized. Because of this setitng in the options file, it was not possible to rename/relocate a database directory after it had been created and use the existing options file.
After this change, the "wal_dir" option is only set under specific circumstances. Methods were added to the ImmutableDBOptions class to see if it is set and if it is set to something other than the dbname. Additionally, a method was added to retrieve the effective value of the WAL dir (either the option or the dbname/path).
Tests were added to the core and ldb to test that a database could be created and renamed without issue. Additional tests for various permutations of wal_dir were also added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8582
Reviewed By: pdillinger, autopear
Differential Revision: D29881122
Pulled By: mrambacher
fbshipit-source-id: 67d3d033dc8813d59917b0a3fba2550c0efd6dfb
Summary:
This PR tries to remove some unnecessary checks as well as unreachable code blocks to
improve readability. An obvious non-public API method naming typo is also corrected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8565
Test Plan: make check
Reviewed By: lth
Differential Revision: D29963984
Pulled By: riversand963
fbshipit-source-id: cc96e8f09890e5cfe9b20eadb63bdca5484c150a
Summary:
- Added Type/CreateFromString
- Added ability to load EventListeners to DBOptions
- Since EventListeners did not previously have a Name(), defaulted to "". If there is no name, the listener cannot be loaded from the ObjectRegistry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8473
Reviewed By: zhichao-cao
Differential Revision: D29901488
Pulled By: mrambacher
fbshipit-source-id: 2d3a4aa6db1562ac03e7ad41b360e3521d486254
Summary:
Originally the 2 options `db_log_dir` and `wal_dir` will be reused in a snapshot db since the options files are just copied. By default, if `wal_dir` was not set when a db was created, it is set to the db's dir. Therefore, the snapshot db will use the same WAL dir. If both the original db and the snapshot db write to or delete from the WAL dir, one may modify or delete files which belong to the other. The same applies to `db_log_dir` as well, but as info log files are not copied or linked, it is simpler for this option.
2 arguments are added to `Checkpoint::CreateCheckpoint()`, allowing to override these 2 options.
`wal_dir`: If the function argument `wal_dir` is empty, or set to the original db location, or the checkpoint location, the snapshot's `wal_dir` option will be updated to the checkpoint location. Otherwise, the absolute path specified in the argument will be used. During checkpointing, live WAL files will be copied or linked the new location, instead of the current WAL dir specified in the original db.
`db_log_dir`: Same as `wal_dir`, but no files will be copied or linked.
A new unit test was added: `CheckpointTest.CheckpointWithOptionsDirsTest`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8572
Test Plan:
New unit test
```
checkpoint_test --gtest_filter="CheckpointTest.CheckpointWithOptionsDirsTest"
```
Output
```
Note: Google Test filter = CheckpointTest.CheckpointWithOptionsDirsTest
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from CheckpointTest
[ RUN ] CheckpointTest.CheckpointWithOptionsDirsTest
[ OK ] CheckpointTest.CheckpointWithOptionsDirsTest (11712 ms)
[----------] 1 test from CheckpointTest (11712 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (11713 ms total)
[ PASSED ] 1 test.
```
This test will fail without this patch. Just modify the code to remove the 2 arguments introduced in this patch in `CreateCheckpoint()`.
Reviewed By: zhichao-cao
Differential Revision: D29832761
Pulled By: autopear
fbshipit-source-id: e6a639b4d674380df82998c0839e79cab695fe29
Summary:
The PerThreadDBPath has already specified a slash. It does not need to be specified when initializing the test path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8555
Reviewed By: ajkr
Differential Revision: D29758399
Pulled By: jay-zhuang
fbshipit-source-id: 6d2b878523e3e8580536e2829cb25489844d9011
Summary:
ObjectLibrary is shared between multiple DB instances, the
Register() could have race condition.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8574
Test Plan: pass the failed test
Reviewed By: ajkr
Differential Revision: D29855096
Pulled By: jay-zhuang
fbshipit-source-id: 541eed0bd495d2c963d858d81e7eabf1ba16153c
anand76