Summary: This will be much easier than reviewing git sha's we currently have in our LOGs
Test Plan: none
Reviewers: sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24591
Summary:
Fix a check in database shutdown or Column family drop during flush.
Special thanks to Maurice Barnum who spots the problem :)
Test Plan: db_test
Reviewers: ljin, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24273
Summary:
Add two stats to compaction summary:
1. Total input records from previous level
2. Total number of records dropped after compaction
Test Plan: See outputs of printing when runnning locally
Reviewers: ljin, igor, MarkCallaghan
Reviewed By: MarkCallaghan
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24411
Summary: perf_context.get_from_output_files_time is now only set writable DB's DB::Get(). Extend it to MultiGet() and read only DB.
Test Plan:
make all check
Fix perf_context_test and extend it to cover MultiGet(), as long as read-only DB. Run it and watch the results
Reviewers: ljin, yhchiang, igor
Reviewed By: igor
Subscribers: rven, leveldb
Differential Revision: https://reviews.facebook.net/D24207
Summary:
make compaction related options changeable. Most of changes are tedious,
following the same convention: grabs MutableCFOptions at the beginning
of compaction under mutex, then pass it throughout the job and register
it in SuperVersion at the end.
Test Plan: make all check
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23349
Fix for:
[db/db_impl.cc:4039]: (error) Instance of 'StopWatch' object is
destroyed immediately.
[db/db_impl.cc:4042]: (error) Instance of 'StopWatch' object is
destroyed immediately.
Signed-off-by: Danny Al-Gaaf <danny.al-gaaf@bisect.de>
Summary:
From this line there used to be one column (MB/sec) that includes reads and writes. This change splits it and for real workloads the rd and wr rates might not match when keys are dropped.
2014/09/29-17:31:01.213162 7f929fbff700 (Original Log Time 2014/09/29-17:31:01.180025) [default] compacted to: files[2 5 0 0 0 0 0], MB/sec: 14.0 rd, 14.0 wr, level 1, files in(4, 0) out(5) MB in(8.5, 0.0) out(8.5), read-write-amplify(2.0) write-amplify(1.0) OK
Test Plan:
make check, grepped LOG
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Differential Revision: https://reviews.facebook.net/D24237
Summary: While debugging clients compaction issues, I noticed bunch of delete bugs: P16329995. MakeTableName returns sst file with "/" prefix. We also need "/" prefix when we get the files though GetChildren(), so that we can properly dedup the files.
Test Plan: none
Reviewers: sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23457
Summary:
Compaction creates backup_input iterator even though it only needed
when compaction filter v2 is enabled
Test Plan: make all check
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23769
Summary: Use PRIu64 to format uint64 in a portable manner
Test Plan: Run "make all check"
Reviewers: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23595
Summary: as title
Test Plan:
make all check
I will think a way to set up stress test for this
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23055
Summary: This diff just moves the write thread control out of the DBImpl. I will need this as I will control column family data concurrency by only accessing some data in the write thread. That way, we won't have to lock our accesses to column family hash table (mappings from IDs to CFDs).
Test Plan: make check
Reviewers: sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23301
Summary:
If bg_error_ is set, that means that we mark DB read only. However, current behavior still continues the flushes and compactions, even though bg_error_ is set.
On the other hand, if bg_error_ is set, we will return Status::OK() from CompactRange(), although the compaction didn't actually succeed.
This is clearly not desired behavior. I found this when I was debugging t5132159, although I'm pretty sure these aren't related.
Also, when we're shutting down, it's dangerous to exit RunManualCompaction(), since that will destruct ManualCompaction object. Background compaction job might still hold a reference to manual_compaction_ and this will lead to undefined behavior. I changed the behavior so that we only exit RunManualCompaction when manual compaction job is marked done.
Test Plan: make check
Reviewers: sdong, ljin, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23223
Summary:
When memtable is full it calls the registered callback. That callback then registers column family as needing the flush. Every write checks if there are some column families that need to be flushed. This completely eliminates the need for MakeRoomForWrite() function and simplifies our Write code-path.
There is some complexity with the concurrency when the column family is dropped. I made it a bit less complex by dropping the column family from the write thread in https://reviews.facebook.net/D22965. Let me know if you want to discuss this.
Test Plan: make check works. I'll also run db_stress with creating and dropping column families for a while.
Reviewers: yhchiang, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23067
Summary: To follow the coding convention and make sure when passing reference as a parameter it is also const, pass MergeContext as a pointer to mem tables.
Test Plan: make all check
Reviewers: ljin, igor
Reviewed By: igor
Subscribers: leveldb, dhruba, yhchiang
Differential Revision: https://reviews.facebook.net/D23085
Summary: Avoid creating unnecessary sst files while db opening
Test Plan: make all check
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: zagfox, yhchiang, ljin, leveldb
Differential Revision: https://reviews.facebook.net/D20661
Summary: removed reference to options in WriteBatch and DBImpl::Get()
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23049
Summary:
all shared_ptrs are in immutable_options now. This will also make
options assignment a little cheaper
Test Plan: make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23001
Summary:
I found it is almost impossible to get rid of this function in a single
batch. I will take a step by step approach
Test Plan: make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22995
Summary:
When we have multiple column families, users can issue Flush() on every column families to make sure everything is flushes, even if some of them might be empty. By skipping the waiting for empty cases, it can be greatly speed up.
Still wait for people's comments before writing unit tests for it.
Test Plan: Will write a unit test to make sure it is correct.
Reviewers: ljin, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D22953
Summary:
Introducing WriteController, which is a source of truth about per-DB write delays. Let's define an DB epoch as a period where there are no flushes and compactions (i.e. new epoch is started when flush or compaction finishes). Each epoch can either:
* proceed with all writes without delay
* delay all writes by fixed time
* stop all writes
The three modes are recomputed at each epoch change (flush, compaction), rather than on every write (which is currently the case).
When we have a lot of column families, our current pull behavior adds a big overhead, since we need to loop over every column family for every write. With new push model, overhead on Write code-path is minimal.
This is just the start. Next step is to also take care of stalls introduced by slow memtable flushes. The final goal is to eliminate function MakeRoomForWrite(), which currently needs to be called for every column family by every write.
Test Plan: make check for now. I'll add some unit tests later. Also, perf test.
Reviewers: dhruba, yhchiang, MarkCallaghan, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22791
Summary: If we drop column family only from (single) write thread, we can be sure that nobody will drop the column family while we're writing (and our mutex is released). This greatly simplifies my patch that's getting rid of MakeRoomForWrite().
Test Plan: make check, but also running stress test
Reviewers: ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22965
Summary: as title
Test Plan: make release
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22935
Summary:
Simply code by removing code path which does not use Arena
from NewInternalIterator
Test Plan:
make all check
make valgrind_check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22395
Summary:
As a preparation to support updating some options dynamically, I'd like
to first introduce ImmutableOptions, which is a subset of Options that
cannot be changed during the course of a DB lifetime without restart.
ColumnFamily will keep both Options and ImmutableOptions. Any component
below ColumnFamily should only take ImmutableOptions in their
constructor. Other options should be taken from APIs, which will be
allowed to adjust dynamically.
I am yet to make changes to memtable and other related classes to take
ImmutableOptions in their ctor. That can be done in a seprate diff as
this one is already pretty big.
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D22545
Summary: It only covers Open() with default column family right now
Test Plan: make release
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22467
Summary:
Before this diff, whenever we Write to non-existing column family, Write() would fail.
This diff adds an option to not fail a Write() when WriteBatch points to non-existing column family. MongoDB said this would be useful for them, since they might have a transaction updating an index that was dropped by another thread. This way, they don't have to worry about checking if all indexes are alive on every write. They don't care if they lose writes to dropped index.
Test Plan: added a small unit test
Reviewers: sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22143
Summary: 1. db/db_impl.cc:2324 (DBImpl::BackgroundCompaction) should not raise bg_error_ when column family is dropped during compaction.
Test Plan: 1. db_stress
Reviewers: ljin, yhchiang, dhruba, igor, sdong
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22653
This eliminates the need to remember to call PERF_TIMER_STOP when a section has
been timed. This allows more useful design with the perf timers and enables
possible return value optimizations. Simplistic example:
class Foo {
public:
Foo(int v) : m_v(v);
private:
int m_v;
}
Foo makeFrobbedFoo(int *errno)
{
*errno = 0;
return Foo();
}
Foo bar(int *errno)
{
PERF_TIMER_GUARD(some_timer);
return makeFrobbedFoo(errno);
}
int main(int argc, char[] argv)
{
Foo f;
int errno;
f = bar(&errno);
if (errno)
return -1;
return 0;
}
After bar() is called, perf_context.some_timer would be incremented as if
Stop(&perf_context.some_timer) was called at the end, and the compiler is still
able to produce optimizations on the return value from makeFrobbedFoo() through
to main().
Summary:
I have an application configured with 16 background threads. Write rates are high. L0->L1 compactions is very slow and it limits the concurrency of the system. While it's happening, other 15 threads are idle. However, when there is a need of a flush, that one thread busy with L0->L1 is doing flush, instead of any other 15 threads that are just sitting there.
This diff prevents that. If there are threads that are idle, we don't let flush preempt compaction.
Test Plan: Will run stress test
Reviewers: ljin, sdong, yhchiang
Reviewed By: sdong, yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D22299
Summary: It is too expensive to bump ticker to every key/vaue pair
Test Plan: make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22527
Summary:
Based on discussions from t4982833. This is just a short-term fix, I plan to revamp manual compaction process as part of t4982812.
Also, I think we should schedule automatic compactions at the very end of manual compactions, not when we're done with one level. I made that change as part of this diff. Let me know if you disagree.
Test Plan: make check for now
Reviewers: sdong, tnovak, yhchiang, ljin
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22401
Summary: No __thread for ios.
Test Plan: compile works for ios now
Reviewers: ljin, dhruba
Reviewed By: dhruba
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22491
Summary:
I will move compression related options in a separate diff since this
diff is already pretty lengthy.
I guess I will also need to change JNI accordingly :(
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21915
Summary:
Currently, PlainTable must use mmap_reads. When PlainTable is used but
allow_mmap_reads is not set, rocksdb will fail in flush.
This diff improve Options sanitization and add MmapReadRequired() to
TableFactory.
Test Plan:
export ROCKSDB_TESTS=PlainTableOptionsSanitizeTest
make db_test -j32
./db_test
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: you, leveldb
Differential Revision: https://reviews.facebook.net/D21939
Summary: A previous change triggered a change by mistake: DestroyDB() will keep info logs under DB directory. Revert the unintended change.
Test Plan: Add a unit test case to verify it.
Reviewers: ljin, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22209
Summary:
1. Support purging info logs from a separate paths from DB path. Refactor the codes of generating info log prefixes so that it can be called when generating new files and scanning log directory.
2. Fix the bug of not scanning multiple DB paths (should only impact multiple DB paths)
Test Plan:
Add unit test for generating and parsing info log files
Add end-to-end test in db_test
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb, igor, dhruba
Differential Revision: https://reviews.facebook.net/D21801
Summary: 1. write db MANIFEST, CURRENT, IDENTITY, sst files, log files to log before open
Test Plan: run db and check LOG file
Reviewers: ljin, yhchiang, igor, dhruba, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21459
Igor Canadi