Summary:
This PR is the first step for Issue https://github.com/facebook/rocksdb/issues/4811. Currently compaction output files are cut at point keys, and the decision is made mainly in `CompactionOutputs::ShouldStopBefore()`. This makes it possible for range tombstones to cause large compactions that does not respect `max_compaction_bytes`. For example, we can have a large range tombstone that overlaps with too many files from the next level. Another example is when there is a gap between a range tombstone and another key. The first issue may be more acceptable, as a lot of data is deleted. This PR address the second issue by calling `ShouldStopBefore()` for range tombstone start keys. The main change is for `CompactionIterator` to emit range tombstone start keys to be processed by `CompactionOutputs`. A new `CompactionMergingIterator` is introduced and only used under `CompactionIterator` for this purpose. Further improvement after this PR include 1) cut compaction output at some grandparent boundary key instead of at the next point key or range tombstone start key and 2) cut compaction output file within a large range tombstone (it may be easier and reasonable to only do it for range tombstones at the end of a compaction output).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10802
Test Plan:
- added unit tests in db_range_del_test.
- stress test: `python3 tools/db_crashtest.py whitebox --[simple|enable_ts] --verify_iterator_with_expected_state_one_in=5 --delrangepercent=5 --prefixpercent=2 --writepercent=58 --readpercen=21 --duration=36000 --range_deletion_width=1000000`
Reviewed By: ajkr, jay-zhuang
Differential Revision: D40308827
Pulled By: cbi42
fbshipit-source-id: a8fd6f70a3f09d0ef7a40e006f6c964bba8c00df
Summary:
In MergingIterator, if a range tombstone's start or end key is added to minHeap/maxHeap, the key is copied. This PR removes the copying of range tombstone keys by adding InternalKey comparator that compares `Slice` for internal key and `ParsedInternalKey` directly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10878
Test Plan:
- existing UT
- ran all flavors of stress test through sandcastle
- benchmarks: I did not get improvement when compiling with DEBUG_LEVEL=0, and saw many noise. With `OPTIMIZE_LEVEL="-O3" USE_LTO=1` I do see improvement.
```
# Favorable set up: half of the writes are DeleteRange.
TEST_TMPDIR=/tmp/rocksdb-rangedel-test-all-tombstone ./db_bench --benchmarks=fillseq,levelstats --writes_per_range_tombstone=1 --max_num_range_tombstones=1000000 --range_tombstone_width=2 --num=1000000 --max_bytes_for_level_base=4194304 --disable_auto_compactions --write_buffer_size=33554432 --key_size=50
# benchmark command
TEST_TMPDIR=/tmp/rocksdb-rangedel-test-all-tombstone ./db_bench --benchmarks=readseq[-W1][-X5],levelstats --use_existing_db=true --cache_size=3221225472 --disable_auto_compactions=true --avoid_flush_during_recovery=true --seek_nexts=100 --reads=1000000 --num=1000000 --threads=25
# main
readseq [AVG 5 runs] : 26017977 (± 371077) ops/sec; 3721.9 (± 53.1) MB/sec
readseq [MEDIAN 5 runs] : 26096905 ops/sec; 3733.2 MB/sec
# this PR
readseq [AVG 5 runs] : 27481724 (± 568758) ops/sec; 3931.3 (± 81.4) MB/sec
readseq [MEDIAN 5 runs] : 27323957 ops/sec; 3908.7 MB/sec
```
Reviewed By: ajkr
Differential Revision: D40711170
Pulled By: cbi42
fbshipit-source-id: 708cb584e2bd085a9ce0d2ef6a420489f721717f
Summary:
Currently, `iterate_upper_bound` is not checked for range tombstone keys in MergingIterator. This may impact performance when there is a large number of range tombstones right after `iterate_upper_bound`. This PR fixes this issue by checking `iterate_upper_bound` in MergingIterator for range tombstone keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10966
Test Plan:
- added unit test
- stress test: `python3 tools/db_crashtest.py whitebox --simple --verify_iterator_with_expected_state_one_in=5 --delrangepercent=5 --prefixpercent=18 --writepercent=48 --readpercen=15 --duration=36000 --range_deletion_width=100`
- ran different stress tests over sandcastle
- Falcon team ran some test traffic and saw reduced CPU usage on processing range tombstones.
Reviewed By: ajkr
Differential Revision: D41414172
Pulled By: cbi42
fbshipit-source-id: 9b2c29eb3abb99327c6a649bdc412e70d863f981
Summary:
The for loop is marked as unreachable code because it will never call the increment. Switch it to `if`.
```
\table\merging_iterator.cc(823): error C2220: the following warning is treated as an error
\table\merging_iterator.cc(823): warning C4702: unreachable code
\table\merging_iterator.cc(1030): error C2220: the following warning is treated as an error
\table\merging_iterator.cc(1030): warning C4702: unreachable code
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10897
Reviewed By: cbi42
Differential Revision: D40811790
Pulled By: jay-zhuang
fbshipit-source-id: fe8fd3e7cf3d6f710360c402b79763854d5120df
Summary:
Right now in MergingIterator, for each range tombstone start and end key, we pop one end from heap and push the other end into the heap. This involves extra downheap and upheap cost. In the likely cases when a range tombstone iterator emits relatively adjacent keys, these keys should have similar order within all keys in the heap. This can happen when there is a burst of consecutive range tombstones, and most of the keys covered by them are dropped already. This PR uses `replace_top()` when inserting new range tombstone keys, which is more efficient in these common cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10877
Test Plan:
- existing UT
- ran all flavors of stress test through sandcastle
- benchmark:
```
# Set up: --writes_per_range_tombstone=1 means one point write and one delete range
TEST_TMPDIR=/tmp/rocksdb-rangedel-test-all-tombstone ./db_bench --benchmarks=fillseq,levelstats --writes_per_range_tombstone=1 --max_num_range_tombstones=1000000 --range_tombstone_width=2 --num=100000000 --writes=800000 --max_bytes_for_level_base=4194304 --disable_auto_compactions --write_buffer_size=33554432 --key_size=64
Level Files Size(MB)
--------------------
0 8 152
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
# Benchmark
TEST_TMPDIR=/tmp/rocksdb-rangedel-test-all-tombstone/ ./db_bench --benchmarks=readseq[-W1][-X5],levelstats --use_existing_db=true --cache_size=3221225472 --num=100000000 --reads=1000000 --disable_auto_compactions=true --avoid_flush_during_recovery=true
# Pre PR
readseq [AVG 5 runs] : 1432116 (± 59664) ops/sec; 224.0 (± 9.3) MB/sec
readseq [MEDIAN 5 runs] : 1454886 ops/sec; 227.5 MB/sec
# Post PR
readseq [AVG 5 runs] : 1944425 (± 29521) ops/sec; 304.1 (± 4.6) MB/sec
readseq [MEDIAN 5 runs] : 1959430 ops/sec; 306.5 MB/sec
```
Reviewed By: ajkr
Differential Revision: D40710936
Pulled By: cbi42
fbshipit-source-id: cb782fb9cdcd26c0c3eb9443215a4ef4d2f79022
Summary:
Add user-defined timestamp support for range deletion. The new API is `DeleteRange(opt, cf, begin_key, end_key, ts)`. Most of the change is to update the comparator to compare without timestamp. Other than that, major changes are
- internal range tombstone data structures (`FragmentedRangeTombstoneList`, `RangeTombstone`, etc.) to store timestamps.
- Garbage collection of range tombstones and range tombstone covered keys during compaction.
- Get()/MultiGet() to return the timestamp of a range tombstone when needed.
- Get/Iterator with range tombstones bounded by readoptions.timestamp.
- timestamp crash test now issues DeleteRange by default.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10661
Test Plan:
- Added unit test: `make check`
- Stress test: `python3 tools/db_crashtest.py --enable_ts whitebox --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4`
- Ran `db_bench` to measure regression when timestamp is not enabled. The tests are for write (with some range deletion) and iterate with DB fitting in memory: `./db_bench--benchmarks=fillrandom,seekrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=500000 --seek_nexts=10 --disable_auto_compactions -disable_wal=true --max_num_range_tombstones=1000`. Did not see consistent regression in no timestamp case.
| micros/op | fillrandom | seekrandom |
| --- | --- | --- |
|main| 2.58 |10.96|
|PR 10661| 2.68 |10.63|
Reviewed By: riversand963
Differential Revision: D39441192
Pulled By: cbi42
fbshipit-source-id: f05aca3c41605caf110daf0ff405919f300ddec2
Summary:
when there is a single memtable without range tombstones and no SST files in the database, DBIter should wrap memtable iterator directly. Currently we create a merging iterator on top of the memtable iterator, and have DBIter wrap around it. This causes iterator regression and this PR fixes this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10705
Test Plan:
- `make check`
- Performance:
- Set up: `./db_bench -benchmarks=filluniquerandom -write_buffer_size=$((1 << 30)) -num=10000`
- Benchmark: `./db_bench -benchmarks=seekrandom -use_existing_db=true -avoid_flush_during_recovery=true -write_buffer_size=$((1 << 30)) -num=10000 -threads=16 -duration=60 -seek_nexts=$seek_nexts`
```
seek_nexts main op/sec https://github.com/facebook/rocksdb/issues/10705 RocksDB v7.6
0 5746568 5749033 5786180
30 2411690 3006466 2837699
1000 102556 128902 124667
```
Reviewed By: ajkr
Differential Revision: D39644221
Pulled By: cbi42
fbshipit-source-id: 8063ff611ba31b0e5670041da3927c8c54b2097d
Summary:
Delete range logic is moved from `DBIter` to `MergingIterator`, and `MergingIterator` will seek to the end of a range deletion if possible instead of scanning through each key and check with `RangeDelAggregator`.
With the invariant that a key in level L (consider memtable as the first level, each immutable and L0 as a separate level) has a larger sequence number than all keys in any level >L, a range tombstone `[start, end)` from level L covers all keys in its range in any level >L. This property motivates optimizations in iterator:
- in `Seek(target)`, if level L has a range tombstone `[start, end)` that covers `target.UserKey`, then for all levels > L, we can do Seek() on `end` instead of `target` to skip some range tombstone covered keys.
- in `Next()/Prev()`, if the current key is covered by a range tombstone `[start, end)` from level L, we can do `Seek` to `end` for all levels > L.
This PR implements the above optimizations in `MergingIterator`. As all range tombstone covered keys are now skipped in `MergingIterator`, the range tombstone logic is removed from `DBIter`. The idea in this PR is similar to https://github.com/facebook/rocksdb/issues/7317, but this PR leaves `InternalIterator` interface mostly unchanged. **Credit**: the cascading seek optimization and the sentinel key (discussed below) are inspired by [Pebble](https://github.com/cockroachdb/pebble/blob/master/merging_iter.go) and suggested by ajkr in https://github.com/facebook/rocksdb/issues/7317. The two optimizations are mostly implemented in `SeekImpl()/SeekForPrevImpl()` and `IsNextDeleted()/IsPrevDeleted()` in `merging_iterator.cc`. See comments for each method for more detail.
One notable change is that the minHeap/maxHeap used by `MergingIterator` now contains range tombstone end keys besides point key iterators. This helps to reduce the number of key comparisons. For example, for a range tombstone `[start, end)`, a `start` and an `end` `HeapItem` are inserted into the heap. When a `HeapItem` for range tombstone start key is popped from the minHeap, we know this range tombstone becomes "active" in the sense that, before the range tombstone's end key is popped from the minHeap, all the keys popped from this heap is covered by the range tombstone's internal key range `[start, end)`.
Another major change, *delete range sentinel key*, is made to `LevelIterator`. Before this PR, when all point keys in an SST file are iterated through in `MergingIterator`, a level iterator would advance to the next SST file in its level. In the case when an SST file has a range tombstone that covers keys beyond the SST file's last point key, advancing to the next SST file would lose this range tombstone. Consequently, `MergingIterator` could return keys that should have been deleted by some range tombstone. We prevent this by pretending that file boundaries in each SST file are sentinel keys. A `LevelIterator` now only advance the file iterator once the sentinel key is processed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10449
Test Plan:
- Added many unit tests in db_range_del_test
- Stress test: `./db_stress --readpercent=5 --prefixpercent=19 --writepercent=20 -delpercent=10 --iterpercent=44 --delrangepercent=2`
- Additional iterator stress test is added to verify against iterators against expected state: https://github.com/facebook/rocksdb/issues/10538. This is based on ajkr's previous attempt https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913.
```
python3 ./tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --compression_type=none --max_background_compactions=8 --value_size_mult=33 --max_key=5000000 --interval=10 --duration=7200 --delrangepercent=3 --delpercent=9 --iterpercent=25 --writepercent=60 --readpercent=3 --prefixpercent=0 --num_iterations=1000 --range_deletion_width=100 --verify_iterator_with_expected_state_one_in=1
```
- Performance benchmark: I used a similar setup as in the blog [post](http://rocksdb.org/blog/2018/11/21/delete-range.html) that introduced DeleteRange, "a database with 5 million data keys, and 10000 range tombstones (ignoring those dropped during compaction) that were written in regular intervals after 4.5 million data keys were written". As expected, the performance with this PR depends on the range tombstone width.
```
# Setup:
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=fillrandom --writes=4500000 --num=5000000
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=overwrite --writes=500000 --num=5000000 --use_existing_db=true --writes_per_range_tombstone=50
# Scan entire DB
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=readseq[-X5] --use_existing_db=true --num=5000000 --disable_auto_compactions=true
# Short range scan (10 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=100000 --seek_nexts=10 --disable_auto_compactions=true
# Long range scan(1000 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=2500 --seek_nexts=1000 --disable_auto_compactions=true
```
Avg over of 10 runs (some slower tests had fews runs):
For the first column (tombstone), 0 means no range tombstone, 100-10000 means width of the 10k range tombstones, and 1 means there is a single range tombstone in the entire DB (width is 1000). The 1 tombstone case is to test regression when there's very few range tombstones in the DB, as no range tombstone is likely to take a different code path than with range tombstones.
- Scan entire DB
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2525600 (± 43564) |2486917 (± 33698) |-1.53% |
| 100 |1853835 (± 24736) |2073884 (± 32176) |+11.87% |
| 1000 |422415 (± 7466) |1115801 (± 22781) |+164.15% |
| 10000 |22384 (± 227) |227919 (± 6647) |+918.22% |
| 1 range tombstone |2176540 (± 39050) |2434954 (± 24563) |+11.87% |
- Short range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |35398 (± 533) |35338 (± 569) |-0.17% |
| 100 |28276 (± 664) |31684 (± 331) |+12.05% |
| 1000 |7637 (± 77) |25422 (± 277) |+232.88% |
| 10000 |1367 |28667 |+1997.07% |
| 1 range tombstone |32618 (± 581) |32748 (± 506) |+0.4% |
- Long range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2262 (± 33) |2353 (± 20) |+4.02% |
| 100 |1696 (± 26) |1926 (± 18) |+13.56% |
| 1000 |410 (± 6) |1255 (± 29) |+206.1% |
| 10000 |25 |414 |+1556.0% |
| 1 range tombstone |1957 (± 30) |2185 (± 44) |+11.65% |
- Microbench does not show significant regression: https://gist.github.com/cbi42/59f280f85a59b678e7e5d8561e693b61
Reviewed By: ajkr
Differential Revision: D38450331
Pulled By: cbi42
fbshipit-source-id: b5ef12e8d8c289ed2e163ccdf277f5039b511fca
Summary:
The RocksDB iterator is a hierarchy of iterators. MergingIterator maintains a heap of LevelIterators, one for each L0 file and for each non-zero level. The Seek() operation naturally lends itself to parallelization, as it involves positioning every LevelIterator on the correct data block in the correct SST file. It lookups a level for a target key, to find the first key that's >= the target key. This typically involves reading one data block that is likely to contain the target key, and scan forward to find the first valid key. The forward scan may read more data blocks. In order to find the right data block, the iterator may read some metadata blocks (required for opening a file and searching the index).
This flow can be parallelized.
Design: Seek will be called two times under async_io option. First seek will send asynchronous request to prefetch the data blocks at each level and second seek will follow the normal flow and in FilePrefetchBuffer::TryReadFromCacheAsync it will wait for the Poll() to get the results and add the iterator to min_heap.
- Status::TryAgain is passed down from FilePrefetchBuffer::PrefetchAsync to block_iter_.Status indicating asynchronous request has been submitted.
- If for some reason asynchronous request returns error in submitting the request, it will fallback to sequential reading of blocks in one pass.
- If the data already exists in prefetch_buffer, it will return the data without prefetching further and it will be treated as single pass of seek.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9994
Test Plan:
- **Run Regressions.**
```
./db_bench -db=/tmp/prefix_scan_prefetch_main -benchmarks="fillseq" -key_size=32 -value_size=512 -num=5000000 -use_direct_io_for_flush_and_compaction=true -target_file_size_base=16777216
```
i) Previous release 7.0 run for normal prefetching with async_io disabled:
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.0
Date: Thu Mar 17 13:11:34 2022
CPU: 24 * Intel Core Processor (Broadwell)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 483618.390 micros/op 2 ops/sec; 338.9 MB/s (249 of 249 found)
```
ii) normal prefetching after changes with async_io disable:
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Set seed to 1652922591315307 because --seed was 0
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.3
Date: Wed May 18 18:09:51 2022
CPU: 32 * Intel Xeon Processor (Skylake)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 483080.466 micros/op 2 ops/sec 120.287 seconds 249 operations; 340.8 MB/s (249 of 249 found)
```
iii) db_bench with async_io enabled completed succesfully
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 -async_io=1 -adaptive_readahead=1
Set seed to 1652924062021732 because --seed was 0
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.3
Date: Wed May 18 18:34:22 2022
CPU: 32 * Intel Xeon Processor (Skylake)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 553913.576 micros/op 1 ops/sec 120.199 seconds 217 operations; 293.6 MB/s (217 of 217 found)
```
- db_stress with async_io disabled completed succesfully
```
export CRASH_TEST_EXT_ARGS=" --async_io=0"
make crash_test -j
```
I**n Progress**: db_stress with async_io is failing and working on debugging/fixing it.
Reviewed By: anand1976
Differential Revision: D36459323
Pulled By: akankshamahajan15
fbshipit-source-id: abb1cd944abe712bae3986ae5b16704b3338917c
Summary:
I was looking at https://github.com/facebook/rocksdb/issues/2636 and got very confused that `MergingIterator::AddIterator()` is populating `min_heap_` with dangling pointers. There is justification in the comments that `min_heap_` will be cleared before it's used, but it'd be cleaner to not populate it with dangling pointers in the first place. Also made similar change in the constructor for consistency, although the pointers there would not be dangling, just unused.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8975
Test Plan: rely on existing tests
Reviewed By: pdillinger, hx235
Differential Revision: D31273767
Pulled By: ajkr
fbshipit-source-id: 127ca9dd1f82f77f55dd0c3f19511de3282fc229
Summary:
Old typedef syntax is confusing
Most but not all changes with
perl -pi -e 's/typedef (.*) ([a-zA-Z0-9_]+);/using $2 = $1;/g' list_of_files
make format
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8751
Test Plan: existing
Reviewed By: zhichao-cao
Differential Revision: D30745277
Pulled By: pdillinger
fbshipit-source-id: 6f65f0631c3563382d43347896020413cc2366d9
Summary:
More tests now pass. When in doubt, I added a TODO comment to check what should happen with an ignored error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7305
Reviewed By: akankshamahajan15
Differential Revision: D23301262
Pulled By: ajkr
fbshipit-source-id: 5f120edc7393560aefc0633250277bbc7e8de9e6
Summary:
IteratorIterator::IsOutOfBound() and IteratorIterator::MayBeOutOfUpperBound() are two functions that related to upper bound check. It is hard for users to reason about this complexity. Consolidate the two functions into one and assign an enum as results to improve readability.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7200
Test Plan: Run all existing test. Would run crash test with atomic for a while.
Reviewed By: anand1976
Differential Revision: D22833181
fbshipit-source-id: a0c724267056adbd0476bde74650e6c7226077e6
Summary:
Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype.
Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling.
It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas.
Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621
Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats.
Reviewed By: siying
Differential Revision: D20786930
Pulled By: al13n321
fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
Summary:
Cleanup some code without any real change in functionality.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6440
Differential Revision: D20015891
Pulled By: riversand963
fbshipit-source-id: 33e18754b0f002006a6d4805e9aaf84c0c8ad25a
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
Conflict resolving in 846e05005d ("Revert "Merging iterator to avoid child iterator reseek for some cases") caused some timer misplaced. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5874
Test Plan: See it build.
Differential Revision: D17705073
fbshipit-source-id: 9bd3a8dc4901ac33c2c6fc5b1091ffbc56a8529f
Summary:
This reverts commit 9fad3e21eb.
Iterator verification in stress tests sometimes fail for assertion
table/block_based/block_based_table_reader.cc:2973: void rocksdb::BlockBasedTableIterator<TBlockIter, TValue>::FindBlockForward() [with TBlockIter = rocksdb::DataBlockIter; TValue = rocksdb::Slice]: Assertion `!next_block_is_out_of_bound || user_comparator_.Compare(*read_options_.iterate_upper_bound, index_iter_->user_key()) <= 0' failed.
It is likely to be linked to https://github.com/facebook/rocksdb/pull/5286 together with https://github.com/facebook/rocksdb/pull/5468 as the former PR makes some child iterator's seek being avoided, so that upper bound condition fails to be updated there. Strictly speaking, the former PR was merged before the latter one, but the latter one feels a more important improvement so I choose to revert the former one for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5871
Differential Revision: D17689196
fbshipit-source-id: 4ded5be68f67bee2782d31a29cb72ea68f59dd8c
Summary:
We are seeing a bug of wrong results with merging iterator's reseek avoidence feature and prefix extractor. Disable this optimization for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5815
Test Plan: Validated the same MyRocks case was fixed; run all existing tests.
Differential Revision: D17430776
fbshipit-source-id: aef664277ba0ab8a2e68331ff0db6ae682535371
Summary:
1. Put the similar logic of adding valid iterator to heap and check invalid iterator's status code to the same helper functions.
2. Because of 1, in the changing direction case, move around the places where we check status a little bit so that we can call the helper function there too. The logic would only divert in the case where the iterator is valid but status is not OK, which is not expected to happen. Add an assertion for that.
3. Put the logic of changing direction from forward to backward to a separate function so the unlikely code path is not in Prev().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5793
Test Plan: run all existing tests.
Differential Revision: D17374397
fbshipit-source-id: d595ffcf156095c4bd0f5532bacba854482a2332
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
Previously if iterator upper/lower bound presents, `DBIter` will check the bound for every key. This patch turns the check into per-file or per-data block check when applicable, by checking against either file largest/smallest key or block index key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5111
Differential Revision: D15330061
Pulled By: siying
fbshipit-source-id: 8a653fe3cd50d94d81eb2d13b087326c58ee2024
Summary:
When reseek happens in merging iterator, reseeking a child iterator can be avoided if:
(1) the iterator represents imutable data
(2) reseek() to a larger key than the current key
(3) the current key of the child iterator is larger than the seek key
because it is guaranteed that the result will fall into the same position.
This optimization will be useful for use cases where users keep seeking to keys nearby in ascending order.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5286
Differential Revision: D15283635
Pulled By: siying
fbshipit-source-id: 35f79ffd5ce3609146faa8cd55f2bfd733502f83
Summary:
Given that index value is a BlockHandle, which is basically an <offset, size> pair we can apply delta encoding on the values. The first value at each index restart interval encoded the full BlockHandle but the rest encode only the size. Refer to IndexBlockIter::DecodeCurrentValue for the detail of the encoding. This reduces the index size which helps using the block cache more efficiently. The feature is enabled with using format_version 4.
The feature comes with a bit of cpu overhead which should be paid back by the higher cache hits due to smaller index block size.
Results with sysbench read-only using 4k blocks and using 16 index restart interval:
Format 2:
19585 rocksdb read-only range=100
Format 3:
19569 rocksdb read-only range=100
Format 4:
19352 rocksdb read-only range=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3983
Differential Revision: D8361343
Pulled By: maysamyabandeh
fbshipit-source-id: f882ee082322acac32b0072e2bdbb0b5f854e651
Summary:
A recent change pushed down the upper bound checking to child iterators. However, this causes the logic of following sequence wrong:
Seek(key);
if (!Valid()) SeekToLast();
Because !Valid() may be caused by upper bounds, rather than the end of the iterator. In this case SeekToLast() points to totally wrong places. This can cause wrong results, infinite loops, or segfault in some cases.
This sequence is called when changing direction from forward to backward. And this by itself also implicitly happen during reseeking optimization in Prev().
Fix this bug by using SeekForPrev() rather than this sequuence, as what is already done in prefix extrator case.
Closes https://github.com/facebook/rocksdb/pull/3989
Differential Revision: D8385422
Pulled By: siying
fbshipit-source-id: 429e869990cfd2dc389421e0836fc496bed67bb4
Summary:
Before this PR, Iterator/InternalIterator may simultaneously have non-ok status() and Valid() = true. That state means that the last operation failed, but the iterator is nevertheless positioned on some unspecified record. Likely intended uses of that are:
* If some sst files are corrupted, a normal iterator can be used to read the data from files that are not corrupted.
* When using read_tier = kBlockCacheTier, read the data that's in block cache, skipping over the data that is not.
However, this behavior wasn't documented well (and until recently the wiki on github had misleading incorrect information). In the code there's a lot of confusion about the relationship between status() and Valid(), and about whether Seek()/SeekToLast()/etc reset the status or not. There were a number of bugs caused by this confusion, both inside rocksdb and in the code that uses rocksdb (including ours).
This PR changes the convention to:
* If status() is not ok, Valid() always returns false.
* Any seek operation resets status. (Before the PR, it depended on iterator type and on particular error.)
This does sacrifice the two use cases listed above, but siying said it's ok.
Overview of the changes:
* A commit that adds missing status checks in MergingIterator. This fixes a bug that actually affects us, and we need it fixed. `DBIteratorTest.NonBlockingIterationBugRepro` explains the scenario.
* Changes to lots of iterator types to make all of them conform to the new convention. Some bug fixes along the way. By far the biggest changes are in DBIter, which is a big messy piece of code; I tried to make it less big and messy but mostly failed.
* A stress-test for DBIter, to gain some confidence that I didn't break it. It does a few million random operations on the iterator, while occasionally modifying the underlying data (like ForwardIterator does) and occasionally returning non-ok status from internal iterator.
To find the iterator types that needed changes I searched for "public .*Iterator" in the code. Here's an overview of all 27 iterator types:
Iterators that didn't need changes:
* status() is always ok(), or Valid() is always false: MemTableIterator, ModelIter, TestIterator, KVIter (2 classes with this name anonymous namespaces), LoggingForwardVectorIterator, VectorIterator, MockTableIterator, EmptyIterator, EmptyInternalIterator.
* Thin wrappers that always pass through Valid() and status(): ArenaWrappedDBIter, TtlIterator, InternalIteratorFromIterator.
Iterators with changes (see inline comments for details):
* DBIter - an overhaul:
- It used to silently skip corrupted keys (`FindParseableKey()`), which seems dangerous. This PR makes it just stop immediately after encountering a corrupted key, just like it would for other kinds of corruption. Let me know if there was actually some deeper meaning in this behavior and I should put it back.
- It had a few code paths silently discarding subiterator's status. The stress test caught a few.
- The backwards iteration code path was expecting the internal iterator's set of keys to be immutable. It's probably always true in practice at the moment, since ForwardIterator doesn't support backwards iteration, but this PR fixes it anyway. See added DBIteratorTest.ReverseToForwardBug for an example.
- Some parts of backwards iteration code path even did things like `assert(iter_->Valid())` after a seek, which is never a safe assumption.
- It used to not reset status on seek for some types of errors.
- Some simplifications and better comments.
- Some things got more complicated from the added error handling. I'm open to ideas for how to make it nicer.
* MergingIterator - check status after every operation on every subiterator, and in some places assert that valid subiterators have ok status.
* ForwardIterator - changed to the new convention, also slightly simplified.
* ForwardLevelIterator - fixed some bugs and simplified.
* LevelIterator - simplified.
* TwoLevelIterator - changed to the new convention. Also fixed a bug that would make SeekForPrev() sometimes silently ignore errors from first_level_iter_.
* BlockBasedTableIterator - minor changes.
* BlockIter - replaced `SetStatus()` with `Invalidate()` to make sure non-ok BlockIter is always invalid.
* PlainTableIterator - some seeks used to not reset status.
* CuckooTableIterator - tiny code cleanup.
* ManagedIterator - fixed some bugs.
* BaseDeltaIterator - changed to the new convention and fixed a bug.
* BlobDBIterator - seeks used to not reset status.
* KeyConvertingIterator - some small change.
Closes https://github.com/facebook/rocksdb/pull/3810
Differential Revision: D7888019
Pulled By: al13n321
fbshipit-source-id: 4aaf6d3421c545d16722a815b2fa2e7912bc851d
Summary:
Three small optimizations:
(1) iter_->IsKeyPinned() shouldn't be called if read_options.pin_data is not true. This may trigger function call all the way down the iterator tree.
(2) reuse the iterator key object in DBIter::FindNextUserEntryInternal(). The constructor of the class has some overheads.
(3) Move the switching direction logic in MergingIterator::Next() to a separate function.
These three in total improves readseq performance by about 3% in my benchmark setting.
Closes https://github.com/facebook/rocksdb/pull/2880
Differential Revision: D5829252
Pulled By: siying
fbshipit-source-id: 991aea10c6d6c3b43769cb4db168db62954ad1e3
Summary:
Merging iterator invokes InternalKeyComparator.Compare() frequently to heap merge. By making InternalKeyComparator final and merging iterator to directly use InternalKeyComparator rather than through Iterator interface, we can give compiler a choice to avoid one more virtual function call if possible. I ran readseq benchmark in memory-only use case to make sure the performance at least doesn't regress.
I have to disable the final key word in debug build, as a hack test class depends on overriding the class.
Closes https://github.com/facebook/rocksdb/pull/2860
Differential Revision: D5800461
Pulled By: siying
fbshipit-source-id: ab876f22a09bb5c560740911412336e0e25ccb53
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
merger.h was always a confusing name for me, simply give the file a better name
Closes https://github.com/facebook/rocksdb/pull/1836
Differential Revision: D4505357
Pulled By: IslamAbdelRahman
fbshipit-source-id: 07b28d8
Summary: Siying suggested to keep old code for normal mode prev() for safety
Test Plan: make check -j64
Reviewers: yiwu, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65439
Summary:
1) The previous solution for Prev() prefix support is not clean.
Since I add api SeekForPrev(), now the Prev() can be symmetric to Next().
and we do not need SeekToLast() to be called in Prev() any more.
Also, Next() will Seek(prefix_seek_key_) to solve the problem of possible inconsistency between db_iter and merge_iter when
there is merge_operator. And prefix_seek_key is only refreshed when change direction to forward.
2) This diff also solves the bug of Iterator::SeekToLast() with iterate_upper_bound_ with prefix extractor.
add test cases for the above two cases.
There are some tests for the SeekToLast() in Prev(), I will clean them later.
Test Plan: make all check
Reviewers: IslamAbdelRahman, andrewkr, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63933
Summary:
Add new Iterator API, `SeekForPrev`: find the last key that <= target key
support prefix_extractor
support prefix_same_as_start
support upper_bound
not supported in iterators without Prev()
Also add tests in db_iter_test and db_iterator_test
Pass all tests
Cheers!
Test Plan: make all check -j64
Reviewers: andrewkr, yiwu, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64149
Summary:
core dump when run
`./db_stress --max_background_compactions=1 --max_write_buffer_number=3 --sync=0 --reopen=20 --write_buffer_size=33554432 --delpercent=5 --log2_keys_per_lock=10 --block_size=16384 --allow_concurrent_memtable_write=1 --test_batches_snapshots=0 --max_bytes_for_level_base=67108864 --progress_reports=0 --mmap_read=1 --kill_prefix_blacklist=WritableFileWriter::Append,WritableFileWriter::WriteBuffered --writepercent=35 --disable_data_sync=0 --readpercent=50 --subcompactions=3 --ops_per_thread=20000000 --memtablerep=skip_list --prefix_size=0 --target_file_size_multiplier=1 --column_families=1 --db=/dev/shm/rocksdb/rocksdb_crashtest_whitebox --threads=32 --disable_wal=0 --open_files=500000 --destroy_db_initially=0 --target_file_size_base=16777216 --nooverwritepercent=1 --iterpercent=10 --max_key=100000000 --prefixpercent=0 --use_clock_cache=false --kill_random_test=189 --cache_size=1048576 --verify_checksum=1`
Actually the relevant flag is `--threads`, data race when --thread > 1 cause problem.
It is possible that multiple
threads read/write memtable simultaneously. After one thread
calls Prev(), another thread may insert a new key just between
the current key and the key next, which may cause the
assert(current_ == CurrentForward()) failure when the first
thread calls Next() again if in prefix seek mode
Test Plan: rerun db_stress with >1 thread / make all check -j64
Reviewers: sdong, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62979
Summary: As title, make sure Prev() works as expected with Next() when the current iter->key() in the range of the same prefix in prefix seek mode
Test Plan: make all check -j64 (add prefix_test with PrefixSeekModePrev test case)
Reviewers: andrewkr, sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61419
Summary:
While trying to reuse PinData() / ReleasePinnedData() .. to optimize away some memcpys I realized that there is a significant overhead for using PinData() / ReleasePinnedData if they were called many times.
This diff refactor the pinning logic by introducing PinnedIteratorsManager a centralized component that will be created once and will be notified whenever we need to Pin an Iterator. This implementation have much less overhead than the original implementation
Test Plan:
make check -j64
COMPILE_WITH_ASAN=1 make check -j64
Reviewers: yhchiang, sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56493
Summary:
This patch update the Iterator API to introduce new functions that allow users to keep the Slices returned by key() valid as long as the Iterator is not deleted
ReadOptions::pin_data : If true keep loaded blocks in memory as long as the iterator is not deleted
Iterator::IsKeyPinned() : If true, this mean that the Slice returned by key() is valid as long as the iterator is not deleted
Also add a new option BlockBasedTableOptions::use_delta_encoding to allow users to disable delta_encoding if needed.
Benchmark results (using https://phabricator.fb.com/P20083553)
```
// $ du -h /home/tec/local/normal.4K.Snappy/db10077
// 6.1G /home/tec/local/normal.4K.Snappy/db10077
// $ du -h /home/tec/local/zero.8K.LZ4/db10077
// 6.4G /home/tec/local/zero.8K.LZ4/db10077
// Benchmarks for shard db10077
// _build/opt/rocks/benchmark/rocks_copy_benchmark \
// --normal_db_path="/home/tec/local/normal.4K.Snappy/db10077" \
// --zero_db_path="/home/tec/local/zero.8K.LZ4/db10077"
// First run
// ============================================================================
// rocks/benchmark/RocksCopyBenchmark.cpp relative time/iter iters/s
// ============================================================================
// BM_StringCopy 1.73s 576.97m
// BM_StringPiece 103.74% 1.67s 598.55m
// ============================================================================
// Match rate : 1000000 / 1000000
// Second run
// ============================================================================
// rocks/benchmark/RocksCopyBenchmark.cpp relative time/iter iters/s
// ============================================================================
// BM_StringCopy 611.99ms 1.63
// BM_StringPiece 203.76% 300.35ms 3.33
// ============================================================================
// Match rate : 1000000 / 1000000
```
Test Plan: Unit tests
Reviewers: sdong, igor, anthony, yhchiang, rven
Reviewed By: rven
Subscribers: dhruba, lovro, adsharma
Differential Revision: https://reviews.facebook.net/D48999
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.
This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.
Test Plan: Run all existing tests.
Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48549
Changyu Bi