Summary:
This gives users the ability to examine the map populated by `GetMapProperty()` with property `kBlockCacheEntryStats`. It also sets us up for a possible future where cache reservations are configured according to `CacheEntryRole`s rather than flags coupled to roles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9838
Test Plan:
- migrated test DBBlockCacheTest.CacheEntryRoleStats to use this API. That test verifies some of the contents are as expected
- added a DBPropertiesTest to verify the public map keys are present, and nothing else
Reviewed By: hx235
Differential Revision: D35629493
Pulled By: ajkr
fbshipit-source-id: 5c4356b8560e85d1f881fd32c44c15960b02fc68
Summary:
This information has been already available as part of the `rocksdb.blob-stats`
string property. The patch adds a dedicated integer property to make it easier
to surface this information in monitoring systems.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9835
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D35619495
Pulled By: ltamasi
fbshipit-source-id: 03fb0b228aa27d3859a1e3783bcb7eca095607f8
Summary:
Especially after updating to C++17, I don't see a compelling case for
*requiring* any folly components in RocksDB. I was able to purge the existing
hard dependencies, and it can be quite difficult to strip out non-trivial components
from folly for use in RocksDB. (The prospect of doing that on F14 has changed
my mind on the best approach here.)
But this change creates an optional integration where we can plug in
components from folly at compile time, starting here with F14FastMap to replace
std::unordered_map when possible (probably no public APIs for example). I have
replaced the biggest CPU users of std::unordered_map with compile-time
pluggable UnorderedMap which will use F14FastMap when USE_FOLLY is set.
USE_FOLLY is always set in the Meta-internal buck build, and a simulation of
that is in the Makefile for public CI testing. A full folly build is not needed, but
checking out the full folly repo is much simpler for getting the dependency,
and anything else we might want to optionally integrate in the future.
Some picky details:
* I don't think the distributed mutex stuff is actually used, so it was easy to remove.
* I implemented an alternative to `folly::constexpr_log2` (which is much easier
in C++17 than C++11) so that I could pull out the hard dependencies on
`ConstexprMath.h`
* I had to add noexcept move constructors/operators to some types to make
F14's complainUnlessNothrowMoveAndDestroy check happy, and I added a
macro to make that easier in some common cases.
* Updated Meta-internal buck build to use folly F14Map (always)
No updates to HISTORY.md nor INSTALL.md as this is not (yet?) considered a
production integration for open source users.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9546
Test Plan:
CircleCI tests updated so that a couple of them use folly.
Most internal unit & stress/crash tests updated to use Meta-internal latest folly.
(Note: they should probably use buck but they currently use Makefile.)
Example performance improvement: when filter partitions are pinned in cache,
they are tracked by PartitionedFilterBlockReader::filter_map_ and we can build
a test that exercises that heavily. Build DB with
```
TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters
```
and test with (simultaneous runs with & without folly, ~20 times each to see
convergence)
```
TEST_TMPDIR=/dev/shm/rocksdb ./db_bench_folly -readonly -use_existing_db -benchmarks=readrandom -num=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters -duration=40 -pin_l0_filter_and_index_blocks_in_cache
```
Average ops/s no folly: 26229.2
Average ops/s with folly: 26853.3 (+2.4%)
Reviewed By: ajkr
Differential Revision: D34181736
Pulled By: pdillinger
fbshipit-source-id: ffa6ad5104c2880321d8a1aa7187e00ab0d02e94
Summary:
The goal of this change is to allow changes to the "current" (in
FileSystem) file temperatures to feed back into DB metadata, so that
they can inform decisions and stats reporting. In part because of
modular code factoring, it doesn't seem easy to do this automagically,
where opening an SST file and observing current Temperature different
from expected would trigger a change in metadata and DB manifest write
(essentially giving the deep read path access to the write path). It is also
difficult to do this while the DB is open because of the limitations of
LogAndApply.
This change allows updating file temperature metadata on a closed DB
using an experimental utility function UpdateManifestForFilesState()
or `ldb update_manifest --update_temperatures`. This should suffice for
"migration" scenarios where outside tooling has placed or re-arranged DB
files into a (different) tiered configuration without going through
RocksDB itself (currently, only compaction can change temperature
metadata).
Some details:
* Refactored and added unit test for `ldb unsafe_remove_sst_file` because
of shared functionality
* Pulled in autovector.h changes from https://github.com/facebook/rocksdb/issues/9546 to fix SuperVersionContext
move constructor (related to an older draft of this change)
Possible follow-up work:
* Support updating manifest with file checksums, such as when a
new checksum function is used and want existing DB metadata updated
for it.
* It's possible that for some repair scenarios, lighter weight than
full repair, we might want to support UpdateManifestForFilesState() to
modify critical file details like size or checksum using same
algorithm. But let's make sure these are differentiated from modifying
file details in ways that don't suspect corruption (or require extreme
trust).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9683
Test Plan: unit tests added
Reviewed By: jay-zhuang
Differential Revision: D34798828
Pulled By: pdillinger
fbshipit-source-id: cfd83e8fb10761d8c9e7f9c020d68c9106a95554
Summary:
Extend the periodic statistics in the info log with the total amount of garbage
in blob files and the space amplification pertaining to blob files, where the
latter is defined as `total_blob_file_size / (total_blob_file_size - total_blob_garbage_size)`.
Also expose the space amp via the `rocksdb.blob-stats` DB property.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9538
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D34126855
Pulled By: ltamasi
fbshipit-source-id: 3153e7a0fe0eca440322db273f4deaabaccc51b2
Summary:
The patch replaces `std::map` with a sorted `std::vector` for
`VersionStorageInfo::blob_files_` and preallocates the space
for the `vector` before saving the `BlobFileMetaData` into the
new `VersionStorageInfo` in `VersionBuilder::Rep::SaveBlobFilesTo`.
These changes reduce the time the DB mutex is held while
saving new `Version`s, and using a sorted `vector` also makes
lookups faster thanks to better memory locality.
In addition, the patch introduces helper methods
`VersionStorageInfo::GetBlobFileMetaData` and
`VersionStorageInfo::GetBlobFileMetaDataLB` that can be used by
clients to perform lookups in the `vector`, and does some general
cleanup in the parts of code where blob file metadata are used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9526
Test Plan:
Ran `make check` and the crash test script for a while.
Performance was tested using a load-optimized benchmark (`fillseq` with vector memtable, no WAL) and small file sizes so that a significant number of files are produced:
```
numactl --interleave=all ./db_bench --benchmarks=fillseq --allow_concurrent_memtable_write=false --level0_file_num_compaction_trigger=4 --level0_slowdown_writes_trigger=20 --level0_stop_writes_trigger=30 --max_background_jobs=8 --max_write_buffer_number=8 --db=/data/ltamasi-dbbench --wal_dir=/data/ltamasi-dbbench --num=800000000 --num_levels=8 --key_size=20 --value_size=400 --block_size=8192 --cache_size=51539607552 --cache_numshardbits=6 --compression_max_dict_bytes=0 --compression_ratio=0.5 --compression_type=lz4 --bytes_per_sync=8388608 --cache_index_and_filter_blocks=1 --cache_high_pri_pool_ratio=0.5 --benchmark_write_rate_limit=0 --write_buffer_size=16777216 --target_file_size_base=16777216 --max_bytes_for_level_base=67108864 --verify_checksum=1 --delete_obsolete_files_period_micros=62914560 --max_bytes_for_level_multiplier=8 --statistics=0 --stats_per_interval=1 --stats_interval_seconds=20 --histogram=1 --memtablerep=skip_list --bloom_bits=10 --open_files=-1 --subcompactions=1 --compaction_style=0 --min_level_to_compress=3 --level_compaction_dynamic_level_bytes=true --pin_l0_filter_and_index_blocks_in_cache=1 --soft_pending_compaction_bytes_limit=167503724544 --hard_pending_compaction_bytes_limit=335007449088 --min_level_to_compress=0 --use_existing_db=0 --sync=0 --threads=1 --memtablerep=vector --allow_concurrent_memtable_write=false --disable_wal=1 --enable_blob_files=1 --blob_file_size=16777216 --min_blob_size=0 --blob_compression_type=lz4 --enable_blob_garbage_collection=1 --seed=<some value>
```
Final statistics before the patch:
```
Cumulative writes: 0 writes, 700M keys, 0 commit groups, 0.0 writes per commit group, ingest: 284.62 GB, 121.27 MB/s
Interval writes: 0 writes, 334K keys, 0 commit groups, 0.0 writes per commit group, ingest: 139.28 MB, 72.46 MB/s
```
With the patch:
```
Cumulative writes: 0 writes, 760M keys, 0 commit groups, 0.0 writes per commit group, ingest: 308.66 GB, 131.52 MB/s
Interval writes: 0 writes, 445K keys, 0 commit groups, 0.0 writes per commit group, ingest: 185.35 MB, 93.15 MB/s
```
Total time to complete the benchmark is 2611 seconds with the patch, down from 2986 secs.
Reviewed By: riversand963
Differential Revision: D34082728
Pulled By: ltamasi
fbshipit-source-id: fc598abf676dce436734d06bb9d2d99a26a004fc
Summary:
sum `w_amp` will be a very large number`(bytes_written + bytes_written_blob)` when there is no any flush and ingest.
This PR set sum `w_amp` to zero if there is no any flush and ingest, this is conform to per-level `w_amp` computation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9065
Reviewed By: ajkr
Differential Revision: D31943994
Pulled By: riversand963
fbshipit-source-id: acbef5e331debebfad09e0e0d8d0885ebbc00609
Summary:
This PR supports querying `GetMapProperty()` with "rocksdb.dbstats" to get the DB-level stats in a map format. It only reports cumulative stats over the DB lifetime and, as such, does not update the baseline for interval stats. Like other map properties, the string keys are not (yet) exposed in the public API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9057
Test Plan: new unit test
Reviewed By: zhichao-cao
Differential Revision: D31781495
Pulled By: ajkr
fbshipit-source-id: 6f77d3aee8b4b1a015061b8c260a123859ceaf9b
Summary:
The patch adjusts the definition of BlobDB's DB properties a bit by
switching to `GetBlobFileSize` from `GetTotalBlobBytes`. The
difference is that the value returned by `GetBlobFileSize` includes
the blob file header and footer as well, and thus matches the on-disk
size of blob files. In addition, the patch removes the `Version` number
from the `blob_stats` property, and updates/extends the unit tests a little.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8902
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D30859542
Pulled By: ltamasi
fbshipit-source-id: e3426d2d567bd1bd8c8636abdafaafa0743c854c
Summary:
RocksDB exposes certain internal statistics via the DB property interface.
However, there are currently no properties related to BlobDB.
For starters, we would like to add the following BlobDB properties:
`rocksdb.num-blob-files`: number of blob files in the current Version (kind of like `num-files-at-level` but note this is not per level, since blob files are not part of the LSM tree).
`rocksdb.blob-stats`: this could return the total number and size of all blob files, and potentially also the total amount of garbage (in bytes) in the blob files in the current Version.
`rocksdb.total-blob-file-size`: the total size of all blob files (as a blob counterpart for `total-sst-file-size`) of all Versions.
`rocksdb.live-blob-file-size`: the total size of all blob files in the current Version.
`rocksdb.estimate-live-data-size`: this is actually an existing property that we can extend so it considers blob files as well. When it comes to blobs, we actually have an exact value for live bytes. Namely, live bytes can be computed simply as total bytes minus garbage bytes, summed over the entire set of blob files in the Version.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8734
Test Plan:
```
➜ rocksdb git:(new_feature_blobDB_properties) ./db_blob_basic_test
[==========] Running 16 tests from 2 test cases.
[----------] Global test environment set-up.
[----------] 10 tests from DBBlobBasicTest
[ RUN ] DBBlobBasicTest.GetBlob
[ OK ] DBBlobBasicTest.GetBlob (12 ms)
[ RUN ] DBBlobBasicTest.MultiGetBlobs
[ OK ] DBBlobBasicTest.MultiGetBlobs (11 ms)
[ RUN ] DBBlobBasicTest.GetBlob_CorruptIndex
[ OK ] DBBlobBasicTest.GetBlob_CorruptIndex (10 ms)
[ RUN ] DBBlobBasicTest.GetBlob_InlinedTTLIndex
[ OK ] DBBlobBasicTest.GetBlob_InlinedTTLIndex (12 ms)
[ RUN ] DBBlobBasicTest.GetBlob_IndexWithInvalidFileNumber
[ OK ] DBBlobBasicTest.GetBlob_IndexWithInvalidFileNumber (9 ms)
[ RUN ] DBBlobBasicTest.GenerateIOTracing
[ OK ] DBBlobBasicTest.GenerateIOTracing (11 ms)
[ RUN ] DBBlobBasicTest.BestEffortsRecovery_MissingNewestBlobFile
[ OK ] DBBlobBasicTest.BestEffortsRecovery_MissingNewestBlobFile (13 ms)
[ RUN ] DBBlobBasicTest.GetMergeBlobWithPut
[ OK ] DBBlobBasicTest.GetMergeBlobWithPut (11 ms)
[ RUN ] DBBlobBasicTest.MultiGetMergeBlobWithPut
[ OK ] DBBlobBasicTest.MultiGetMergeBlobWithPut (14 ms)
[ RUN ] DBBlobBasicTest.BlobDBProperties
[ OK ] DBBlobBasicTest.BlobDBProperties (21 ms)
[----------] 10 tests from DBBlobBasicTest (124 ms total)
[----------] 6 tests from DBBlobBasicTest/DBBlobBasicIOErrorTest
[ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.GetBlob_IOError/0
[ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.GetBlob_IOError/0 (12 ms)
[ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.GetBlob_IOError/1
[ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.GetBlob_IOError/1 (10 ms)
[ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.MultiGetBlobs_IOError/0
[ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.MultiGetBlobs_IOError/0 (10 ms)
[ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.MultiGetBlobs_IOError/1
[ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.MultiGetBlobs_IOError/1 (10 ms)
[ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.CompactionFilterReadBlob_IOError/0
[ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.CompactionFilterReadBlob_IOError/0 (1011 ms)
[ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.CompactionFilterReadBlob_IOError/1
[ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.CompactionFilterReadBlob_IOError/1 (1013 ms)
[----------] 6 tests from DBBlobBasicTest/DBBlobBasicIOErrorTest (2066 ms total)
[----------] Global test environment tear-down
[==========] 16 tests from 2 test cases ran. (2190 ms total)
[ PASSED ] 16 tests.
```
Reviewed By: ltamasi
Differential Revision: D30690849
Pulled By: Zhiyi-Zhang
fbshipit-source-id: a7567319487ad76bd1a2e24bf143afdbbd9e4346
Summary:
Useful in some places for object uniqueness across processes.
Currently used for generating a host-wide identifier of Cache objects
but expected to be used soon in some unique id generation code.
`int64_t` is chosen for return type because POSIX uses signed integer type,
usually `int`, for `pid_t` and Windows uses `DWORD`, which is `uint32_t`.
Future work: avoid copy-pasted declarations in port_*.h, perhaps with
port_common.h always included from port.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8693
Test Plan: manual for now
Reviewed By: ajkr, anand1976
Differential Revision: D30492876
Pulled By: pdillinger
fbshipit-source-id: 39fc2788623cc9f4787866bdb67a4d183dde7eef
Summary:
I previously didn't notice the DB mutex was being held during
block cache entry stat scans, probably because I primarily checked for
read performance regressions, because they require the block cache and
are traditionally latency-sensitive.
This change does some refactoring to avoid holding DB mutex and to
avoid triggering and waiting for a scan in GetProperty("rocksdb.cfstats").
Some tests have to be updated because now the stats collector is
populated in the Cache aggressively on DB startup rather than lazily.
(I hope to clean up some of this added complexity in the future.)
This change also ensures proper treatment of need_out_of_mutex for
non-int DB properties.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8538
Test Plan:
Added unit test logic that uses sync points to fail if the DB mutex
is held during a scan, covering the various ways that a scan might be
triggered.
Performance test - the known impact to holding the DB mutex is on
TransactionDB, and the easiest way to see the impact is to hack the
scan code to almost always miss and take an artificially long time
scanning. Here I've injected an unconditional 5s sleep at the call to
ApplyToAllEntries.
Before (hacked):
$ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 433.219 micros/op 2308 ops/sec; 0.1 MB/s ( transactions:78999 aborts:0)
rocksdb.db.write.micros P50 : 16.135883 P95 : 36.622503 P99 : 66.036115 P100 : 5000614.000000 COUNT : 149677 SUM : 8364856
$ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 448.802 micros/op 2228 ops/sec; 0.1 MB/s ( transactions:75999 aborts:0)
rocksdb.db.write.micros P50 : 16.629221 P95 : 37.320607 P99 : 72.144341 P100 : 5000871.000000 COUNT : 143995 SUM : 13472323
Notice the 5s P100 write time.
After (hacked):
$ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 303.645 micros/op 3293 ops/sec; 0.1 MB/s ( transactions:98999 aborts:0)
rocksdb.db.write.micros P50 : 16.061871 P95 : 33.978834 P99 : 60.018017 P100 : 616315.000000 COUNT : 187619 SUM : 4097407
$ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 310.383 micros/op 3221 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0)
rocksdb.db.write.micros P50 : 16.270026 P95 : 35.786844 P99 : 64.302878 P100 : 603088.000000 COUNT : 183819 SUM : 4095918
P100 write is now ~0.6s. Not good, but it's the same even if I completely bypass all the scanning code:
$ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 311.365 micros/op 3211 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0)
rocksdb.db.write.micros P50 : 16.274362 P95 : 36.221184 P99 : 68.809783 P100 : 649808.000000 COUNT : 183819 SUM : 4156767
$ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 308.395 micros/op 3242 ops/sec; 0.1 MB/s ( transactions:97999 aborts:0)
rocksdb.db.write.micros P50 : 16.106222 P95 : 37.202403 P99 : 67.081875 P100 : 598091.000000 COUNT : 185714 SUM : 4098832
No substantial difference.
Reviewed By: siying
Differential Revision: D29738847
Pulled By: pdillinger
fbshipit-source-id: 1c5c155f5a1b62e4fea0fd4eeb515a8b7474027b
Summary:
If the block Cache is full with strict_capacity_limit=false,
then our CacheEntryStatsCollector could be immediately evicted on
release, so iterating through column families with shared block cache
could trigger re-scan for each CF. This change fixes that problem by
pinning the CacheEntryStatsCollector from InternalStats so that it's not
evicted.
I had originally thought that this object could participate in LRU like
everything else, but even though a re-load+re-scan only touches memory,
it can be orders of magnitude more expensive than other cache misses.
One service in Facebook has scans that take ~20s over 100GB block cache
that is mostly 4KB entries. (The up-side of this bug and https://github.com/facebook/rocksdb/issues/8369 is that
we had a natural experiment on the effect on some service metrics even
with block cache scans running continuously in the background--a kind
of worst case scenario. Metrics like latency were not affected enough
to trigger warnings.)
Other smaller fixes:
20s is already a sizable portion of 600s stats dump period, or 180s
default max age to force re-scan, so added logic to ensure that (for
each block cache) we don't spend more than 0.2% of our background thread
time scanning it. Nevertheless, "foreground" requests for cache entry
stats (calls to `db->GetMapProperty(DB::Properties::kBlockCacheEntryStats)`)
are permitted to consume more CPU.
Renamed field to cache_entry_stats_ to match code style.
This change is intended for patching in 6.21 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8385
Test Plan:
unit test expanded to cover new logic (detect regression),
some manual testing with db_bench
Reviewed By: ajkr
Differential Revision: D29042759
Pulled By: pdillinger
fbshipit-source-id: 236faa902397f50038c618f50fbc8cf3f277308c
Summary:
In final polishing of https://github.com/facebook/rocksdb/issues/8297 (after most manual testing), I
broke my own caching layer by sanitizing an input parameter with
std::min(0, x) instead of std::max(0, x). I resisted unit testing the
timing part of the result caching because historically, these test
are either flaky or difficult to write, and this was not a correctness
issue. This bug is essentially unnoticeable with a small number
of column families but can explode background work with a
large number of column families.
This change fixes the logical error, removes some unnecessary related
optimization, and adds mock time/sleeps to the unit test to ensure we
can cache hit within the age limit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8369
Test Plan: added time testing logic to existing unit test
Reviewed By: ajkr
Differential Revision: D28950892
Pulled By: pdillinger
fbshipit-source-id: e79cd4ff3eec68fd0119d994f1ed468c38026c3b
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
Summary:
This PR is a first step at attempting to clean up some of the Mutable/Immutable Options code. With this change, a DBOption and a ColumnFamilyOption can be reconstructed from their Mutable and Immutable equivalents, respectively.
readrandom tests do not show any performance degradation versus master (though both are slightly slower than the current 6.19 release).
There are still fields in the ImmutableCFOptions that are not CF options but DB options. Eventually, I would like to move those into an ImmutableOptions (= ImmutableDBOptions+ImmutableCFOptions). But that will be part of a future PR to minimize changes and disruptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8176
Reviewed By: pdillinger
Differential Revision: D27954339
Pulled By: mrambacher
fbshipit-source-id: ec6b805ba9afe6e094bffdbd76246c2d99aa9fad
Summary:
Historically, the DB properties `rocksdb.cur-size-active-mem-table`,
`rocksdb.cur-size-all-mem-tables`, and `rocksdb.size-all-mem-tables` called
the method `MemTable::ApproximateMemoryUsage` for mutable memtables,
which is not safe without synchronization. This resulted in data races with
memtable inserts. The patch changes the code handling these properties
to use `MemTable::ApproximateMemoryUsageFast` instead, which returns a
cached value backed by an atomic variable. Two test cases had to be updated
for this change. `MemoryTest.MemTableAndTableReadersTotal` was fixed by
increasing the value size used so each value ends up in its own memtable,
which was the original intention (note: the test has been broken in the sense
that the test code didn't consider that memtable sizes below 64 KB get
increased to 64 KB by `SanitizeOptions`, and has been passing only by
accident). `DBTest.MemoryUsageWithMaxWriteBufferSizeToMaintain` relies on
completely up-to-date values and thus was changed to use `ApproximateMemoryUsage`
directly instead of going through the DB properties. Note: this should be safe in this case
since there's only a single thread involved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8206
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D27866811
Pulled By: ltamasi
fbshipit-source-id: 7bd754d0565e0a65f1f7f0e78ffc093beef79394
Summary:
The patch does the following:
1) Exposes the amount of data (number of bytes) read from blob files from
`BlobFileReader::GetBlob` / `Version::GetBlob`.
2) Tracks the total number and size of blobs read from blob files during a
compaction (due to garbage collection or compaction filter usage) in
`CompactionIterationStats` and propagates this data to
`InternalStats::CompactionStats` / `CompactionJobStats`.
3) Updates the formulae for write amplification calculations to include the
amount of data read from blob files.
4) Extends the compaction stats dump with a new column `Rblob(GB)` and
a new line containing the total number and size of blob files in the current
`Version` to complement the information about the shape and size of the LSM tree
that's already there.
5) Updates `CompactionJobStats` so that the number of files and amount of data
written by a compaction are broken down per file type (i.e. table/blob file).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8022
Test Plan: Ran `make check` and `db_bench`.
Reviewed By: riversand963
Differential Revision: D26801199
Pulled By: ltamasi
fbshipit-source-id: 28a5f072048a702643b28cb5971b4099acabbfb2
Summary:
The patch breaks down the "bytes written" (as well as the "number of output files")
compaction statistics into two, so the values are logged separately for table files
and blob files in the info log, and are shown in separate columns (`Write(GB)` for table
files, `Wblob(GB)` for blob files) when the compaction statistics are dumped.
This will also come in handy for fixing the write amplification statistics, which currently
do not consider the amount of data read from blob files during compaction. (This will
be fixed by an upcoming patch.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8013
Test Plan: Ran `make check` and `db_bench`.
Reviewed By: riversand963
Differential Revision: D26742156
Pulled By: ltamasi
fbshipit-source-id: 31d18ee8f90438b438ca7ed1ea8cbd92114442d5
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
So that we can more easily get aggregate live table data such
as total filter, index, and data sizes.
Also adds ldb support for getting properties
Also fixed some missing/inaccurate related comments in db.h
For example:
$ ./ldb --db=testdb get_property rocksdb.aggregated-table-properties
rocksdb.aggregated-table-properties.data_size: 102871
rocksdb.aggregated-table-properties.filter_size: 0
rocksdb.aggregated-table-properties.index_partitions: 0
rocksdb.aggregated-table-properties.index_size: 2232
rocksdb.aggregated-table-properties.num_data_blocks: 100
rocksdb.aggregated-table-properties.num_deletions: 0
rocksdb.aggregated-table-properties.num_entries: 15000
rocksdb.aggregated-table-properties.num_merge_operands: 0
rocksdb.aggregated-table-properties.num_range_deletions: 0
rocksdb.aggregated-table-properties.raw_key_size: 288890
rocksdb.aggregated-table-properties.raw_value_size: 198890
rocksdb.aggregated-table-properties.top_level_index_size: 0
$ ./ldb --db=testdb get_property rocksdb.aggregated-table-properties-at-level1
rocksdb.aggregated-table-properties-at-level1.data_size: 80909
rocksdb.aggregated-table-properties-at-level1.filter_size: 0
rocksdb.aggregated-table-properties-at-level1.index_partitions: 0
rocksdb.aggregated-table-properties-at-level1.index_size: 1787
rocksdb.aggregated-table-properties-at-level1.num_data_blocks: 81
rocksdb.aggregated-table-properties-at-level1.num_deletions: 0
rocksdb.aggregated-table-properties-at-level1.num_entries: 12466
rocksdb.aggregated-table-properties-at-level1.num_merge_operands: 0
rocksdb.aggregated-table-properties-at-level1.num_range_deletions: 0
rocksdb.aggregated-table-properties-at-level1.raw_key_size: 238210
rocksdb.aggregated-table-properties-at-level1.raw_value_size: 163414
rocksdb.aggregated-table-properties-at-level1.top_level_index_size: 0
$
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7779
Test Plan: Added a test to ldb_test.py
Reviewed By: jay-zhuang
Differential Revision: D25653103
Pulled By: pdillinger
fbshipit-source-id: 2905469a08a64dd6b5510cbd7be2e64d3234d6d3
Summary:
Handle misuse of snprintf return value to avoid Out of bound
read/write.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7686
Test Plan: make check -j64
Reviewed By: riversand963
Differential Revision: D25030831
Pulled By: akankshamahajan15
fbshipit-source-id: 1a1d181c067c78b94d720323ae00b79566b57cfa
Summary:
https://github.com/facebook/rocksdb/pull/7461 accidentally broke
`InternalStats::DumpCFStats` by making `DumpCFFileHistogram` overwrite
the output of `DumpCFStatsNoFileHistogram` instead of appending to it,
resulting in only the file histogram related information getting logged.
The patch fixes this by reverting to appending in `DumpCFFileHistogram`.
Fixes https://github.com/facebook/rocksdb/issues/7664 .
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7666
Test Plan: Ran `make check` and checked the info log of `db_bench`.
Reviewed By: riversand963
Differential Revision: D24929051
Pulled By: ltamasi
fbshipit-source-id: 636a3d5ebb5ce23de4f3fe4f03ad3f16cb2858f8
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
Summary:
This PR merges the functionality of making the ColumnFamilyOptions, TableFactory, and DBOptions into Configurable into a single PR, resolving any merge conflicts
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5753
Reviewed By: ajkr
Differential Revision: D23385030
Pulled By: zhichao-cao
fbshipit-source-id: 8b977a7731556230b9b8c5a081b98e49ee4f160a
Summary:
This PR provides preliminary support for handling IO error during MANIFEST write.
File write/sync is not guaranteed to be atomic. If we encounter an IOError while writing/syncing to the MANIFEST file, we cannot be sure about the state of the MANIFEST file. The version edits may or may not have reached the file. During cleanup, if we delete the newly-generated SST files referenced by the pending version edit(s), but the version edit(s) actually are persistent in the MANIFEST, then next recovery attempt will process the version edits(s) and then fail since the SST files have already been deleted.
One approach is to truncate the MANIFEST after write/sync error, so that it is safe to delete the SST files. However, file truncation may not be supported on certain file systems. Therefore, we take the following approach.
If an IOError is detected during MANIFEST write/sync, we disable file deletions for the faulty database. Depending on whether the IOError is retryable (set by underlying file system), either RocksDB or application can call `DB::Resume()`, or simply shutdown and restart. During `Resume()`, RocksDB will try to switch to a new MANIFEST and write all existing in-memory version storage in the new file. If this succeeds, then RocksDB may proceed. If all recovery is completed, then file deletions will be re-enabled.
Note that multiple threads can call `LogAndApply()` at the same time, though only one of them will be going through the process MANIFEST write, possibly batching the version edits of other threads. When the leading MANIFEST writer finishes, all of the MANIFEST writing threads in this batch will have the same IOError. They will all call `ErrorHandler::SetBGError()` in which file deletion will be disabled.
Possible future directions:
- Add an `ErrorContext` structure so that it is easier to pass more info to `ErrorHandler`. Currently, as in this example, a new `BackgroundErrorReason` has to be added.
Test plan (dev server):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6949
Reviewed By: anand1976
Differential Revision: D22026020
Pulled By: riversand963
fbshipit-source-id: f3c68a2ef45d9b505d0d625c7c5e0c88495b91c8
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
Add oldest snapshot sequence property, so we can use `db.GetProperty("rocksdb.oldest-snapshot-sequence")` to get the sequence number of the oldest snapshot.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6228
Differential Revision: D19264145
Pulled By: maysamyabandeh
fbshipit-source-id: 67fbe5304d89cbc475bd404e30d1299f7b11c010
Summary:
Further apply formatter to more recent commits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5830
Test Plan: Run all existing tests.
Differential Revision: D17488031
fbshipit-source-id: 137458fd94d56dd271b8b40c522b03036943a2ab
Summary:
When building with clang 9, warning is reported for InternalDBStatsType type names shadowed the one for statistics. Rename them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5779
Test Plan: Build with clang 9 and see it passes.
Differential Revision: D17239378
fbshipit-source-id: af28fb42066c738cd1b841f9fe21ab4671dafd18
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
Measure CPU time consumed for a compaction and report it in the stats report
Enable NowCPUNanos() to work for MacOS
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4889
Differential Revision: D13701276
Pulled By: zinoale
fbshipit-source-id: 5024e5bbccd4dd10fd90d947870237f436445055
Summary:
This property can help debug why SST files aren't being deleted. Previously we only had the property "rocksdb.is-file-deletions-enabled". However, even when that returned true, obsolete SSTs may still not be deleted due to the coarse-grained mechanism we use to prevent newly created SSTs from being accidentally deleted. That coarse-grained mechanism uses a lower bound file number for SSTs that should not be deleted, and this property exposes that lower bound.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4618
Differential Revision: D12898179
Pulled By: ajkr
fbshipit-source-id: fe68acc041ddbcc9276bbd48976524d95aafc776
Summary:
Add a new DB property to DB::GetProperty(), which returns the option.statistics. Test is updated to pass.
Closes https://github.com/facebook/rocksdb/pull/3966
Differential Revision: D8311139
Pulled By: zhichao-cao
fbshipit-source-id: ea78f4727358c807b0e5a0ea62e09defb10ad9ac
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662
Differential Revision: D7426121
Pulled By: Dayvedde
fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
Summary:
Add `compaction_reason` as part of event log for event `compaction started`.
Add counters for each `CompactionReason`.
Closes https://github.com/facebook/rocksdb/pull/3679
Differential Revision: D7550348
Pulled By: riversand963
fbshipit-source-id: a19cff3a678c785aa5ef41aac78b9a5968fcc34d
Summary:
Add "rocksdb.live-sst-files-size" DB property which only include files of latest version. Existing "rocksdb.total-sst-files-size" include files from all versions and thus include files that's obsolete but not yet deleted. I'm going to use this new property to cap blob db sst + blob files size.
Closes https://github.com/facebook/rocksdb/pull/3548
Differential Revision: D7116939
Pulled By: yiwu-arbug
fbshipit-source-id: c6a52e45ce0f24ef78708156e1a923c1dd6bc79a
Andrew Kryczka