Summary:
DB::AddFile() right now always add the ingested file to L0
update the logic to add the file to the lowest possible level
Test Plan: unit tests
Reviewers: jkedgar, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D59637
Summary: filter_deltes is not a frequently used feature. Remove it.
Test Plan: Run all test suites.
Reviewers: igor, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59427
Summary: char is not signed in some platforms. Having negative values confuse those compilers.
Test Plan: Run all existing tests.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59619
Summary: allow_concurrent_memtable_write and enable_write_thread_adaptive_yield went through extensive stress test and benchmarks. Should be considered stable.
Test Plan: N/A
Reviewers: ngbronson, yhchiang, IslamAbdelRahman, dhruba
Reviewed By: dhruba
Subscribers: MarkCallaghan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59415
Summary:
Add option to not flush memtable on open()
In case the option is enabled, don't delete existing log files by not updating log numbers to MANIFEST.
Will still flush if we need to (e.g. memtable full in the middle). In that case we also flush final memtable.
If wal_recovery_mode = kPointInTimeRecovery, do not halt immediately after encounter corruption. Instead, check if seq id of next log file is last_log_sequence + 1. In that case we continue recovery.
Test Plan: See unit test.
Reviewers: dhruba, horuff, sdong
Reviewed By: sdong
Subscribers: benj, yhchiang, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57813
Summary:
Try to decompress compressed blocks when a special flag is set.
assert and crash in debug builds if we can't decompress the just-compressed input.
Test Plan: Run unit-tests.
Reviewers: dhruba, andrewkr, sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59145
Summary:
memtable_prefix_bloom_probes is not a critical option. Remove it to reduce number of options.
It's easier for users to make mistakes with memtable_prefix_bloom_bits, turn it to memtable_prefix_bloom_bits_ratio
Test Plan: Run all existing tests
Reviewers: yhchiang, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: gunnarku, yoshinorim, MarkCallaghan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59199
Summary: AFIK, options builder is not used by anyone. Remove it.
Test Plan: Run all existing tests.
Reviewers: IslamAbdelRahman, andrewkr, igor
Reviewed By: igor
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59319
Summary:
Rocksdb backup and restore rate limiting is currently done per backup/restore.
So, it is difficult to control rate across multiple backup/restores. With this
change, a throttler can be provided. If a throttler is provided, it is used.
Otherwise, a new throttler is created based on the actual rate limits specified
in the options.
Test Plan: Added unit tests
Reviewers: ldemailly, andrewkr, sdong
Reviewed By: andrewkr
Subscribers: igor, yiwu, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56265
Summary: With `table_options.cache_index_and_filter_blocks = true`, index and filter blocks are stored in block cache. Then people are curious how much of the block cache total size is used by indexes and bloom filters. It will be nice we have a way to report that. It can help people tune performance and plan for optimized hardware setting. We add several enum values for db Statistics. BLOCK_CACHE_INDEX/FILTER_BYTES_INSERT - BLOCK_CACHE_INDEX/FILTER_BYTES_ERASE = current INDEX/FILTER total block size in bytes.
Test Plan:
write a test case called `DBBlockCacheTest.IndexAndFilterBlocksStats`. The result is:
```
[gzh@dev9927.prn1 ~/local/rocksdb] make db_block_cache_test -j64 && ./db_block_cache_test --gtest_filter=DBBlockCacheTest.IndexAndFilterBlocksStats
Makefile:101: Warning: Compiling in debug mode. Don't use the resulting binary in production
GEN util/build_version.cc
make: `db_block_cache_test' is up to date.
Note: Google Test filter = DBBlockCacheTest.IndexAndFilterBlocksStats
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBBlockCacheTest
[ RUN ] DBBlockCacheTest.IndexAndFilterBlocksStats
[ OK ] DBBlockCacheTest.IndexAndFilterBlocksStats (689 ms)
[----------] 1 test from DBBlockCacheTest (689 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (689 ms total)
[ PASSED ] 1 test.
```
Reviewers: IslamAbdelRahman, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D58677
Summary:
This enables configurable Envs without recompiling. For example, my
next diff will make env_test test an Env created by NewEnvFromUri(). Then,
users can determine which Env is tested simply by providing the URI for
NewEnvFromUri() (e.g., through a CLI argument or environment variable).
The registration process allows us to register any Env that is linked with the
RocksDB library, so we can register our internal Envs as well.
The registration code is inspired by our internal InitRegistry.
Test Plan: new unit test
Reviewers: IslamAbdelRahman, lightmark, ldemailly, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D58449
* Create a callback for memtable becoming immutable
Create a callback for memtable becoming immutable
Create a callback for memtable becoming immutable
moved notification outside the lock
Move sealed notification to unlocked portion of SwitchMemtable
* fix lite build
Summary: The function wrapper for LDBCommand::SelectCommand is too long so that Windows build fails with warning "decorated name length exceeded, name was truncated". Shrink the length by using a struct.
Test Plan: Build on both of Linux and Windows and make sure the warning doesn't show in either platform.
Reviewers: andrewkr, adsharma, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58965
Summary:
Add under and over limits for rocksdb::PerfLevel enum
to allow us to do boundary checks before casting ints or unints
to this enum.
Test Plan: make all check -j32
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D58521
Summary: I don't think util/mutable_cf_options.h is needed inside include/rocksdb/sst_file_writer.h and it is not allowed. Remove it.
Test Plan: Run all tests
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: lightmark, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58827
Summary:
This patch adds direct IO capability to RocksDB Env.
The direct IO capability is required for persistent cache since NVM is best
accessed as 4K direct IO. SSDs can leverage direct IO for reading.
Direct IO requires the offset and size be sector size aligned, and memory to
be kernel page aligned. Since neither RocksDB/Persistent read cache data
layout is aligned to sector size, the code can accommodate reading unaligned IO size
(or unaligned memory) at the cost of an alloc/copy.
The write code path expects the size and memory to be aligned.
Test Plan: Run RocksDB unit tests
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57393
Summary: Deprecate this one option and delete code and tests that are now superfluous.
Test Plan: all tests pass
Reviewers: igor, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: msalib, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55317
Summary:
A couple of notes from the diff:
- The namespace block I added at the top of table_properties_collector.cc was in reaction to an issue i was having with PutVarint64 and reusing the "val" string. I'm not sure this is the cleanest way of doing this, but abstracting this out at least results in the correct behavior.
- I chose "rocksdb.merge.operands" as the property name. I am open to suggestions for better names.
- The change to sst_dump_tool.cc seems a bit inelegant to me. Is there a better way to do the if-else block?
Test Plan:
I added a test case in table_properties_collector_test.cc. It adds two merge operands and checks to make sure that both of them are reflected by GetMergeOperands. It also checks to make sure the wasPropertyPresent bool is properly set in the method.
Running both of these tests should pass:
./table_properties_collector_test
./sst_dump_test
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58119
Summary:
Expose a simple function to convert CompressionType to it's corresponding option string
This is for a diff @yoshinorim is working on for MyRocks
Test Plan: unittest
Reviewers: yhchiang, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D58215
Summary:
Added a new abstraction to cache page to RocksDB designed for the read
cache use.
RocksDB current block cache is more of an object cache. For the persistent read cache
project, what we need is a page cache equivalent. This changes adds a cache
abstraction to RocksDB to cache pages called PersistentCache. PersistentCache can cache
uncompressed pages or raw pages (content as in filesystem). The user can
choose to operate PersistentCache either in COMPRESSED or UNCOMPRESSED mode.
Blame Rev:
Test Plan: Run unit tests
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55707
Summary:
So a customized ldb tool can pass it's own Selector.
Such a selector is expected to call LDBCommand::SelectCommand
and then add some of its own customized commands
Test Plan: make ldb
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57249
Summary: Store SST file compression algorithm as a TableProperty.
Test Plan: Modified and ran the table_test UT that checks for TableProperties
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: lgalanis, andrewkr, dhruba, IslamAbdelRahman
Differential Revision: https://reviews.facebook.net/D58017
Summary:
The implementation remains where it is. Only the
header is exported. This is so that a customized
ldb tool can print help along with its own
extra commands
Test Plan: make ldb
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57255
Summary:
This diff is built on top of WriteBatch modification: https://reviews.facebook.net/D54093 and adds the required functionality to rocksdb core necessary for rocksdb to support 2PC.
modfication of DBImpl::WriteImpl()
- added two arguments *uint64_t log_used = nullptr, uint64_t log_ref = 0;
- *log_used is an output argument which will return the log number which the incoming batch was inserted into, 0 if no WAL insert took place.
- log_ref is a supplied log_number which all memtables inserted into will reference after the batch insert takes place. This number will reside in 'FindMinPrepLogReferencedByMemTable()' until all Memtables insertinto have flushed.
- Recovery/writepath is now aware of prepared batches and commit and rollback markers.
Test Plan: There is currently no test on this diff. All testing of this functionality takes place in the Transaction layer/diff but I will add some testing.
Reviewers: IslamAbdelRahman, sdong
Subscribers: leveldb, santoshb, andrewkr, vasilep, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D56919
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
Summary:
Add a new option that can be used to set a specific compression algorithm for bottommost level.
This option will only affect levels larger than base level.
I have also updated CompactionJobInfo to include the compression algorithm used in compaction
Test Plan:
added new unittest
existing unittests
Reviewers: andrewkr, yhchiang, sdong
Reviewed By: sdong
Subscribers: lightmark, andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D57669
Summary:
This is needed so that rocksdb users can add more
commands to the included ldb tool by adding more custom
commands.
Test Plan: make -j ldb
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57243
Summary: This is to provide a way for users to skip prefix bloom in point look-up.
Test Plan: Add a new unit test scenario.
Reviewers: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57747
Summary: We changed default options of max_open_files and max_file_opening_threads but didn't revert it in OptimizeForSmallDb().
Test Plan: Add a unit test
Reviewers: igor, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57675
Summary:
Add an option `iterator_readahead_size` to `ReadOptions` to enable
configurable readahead for iterators similar to the corresponding
option for compaction.
Test Plan:
```
make commit_prereq
```
Reviewers: kumar.rangarajan, ott, igor, sdong
Reviewed By: sdong
Subscribers: yiwu, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55419
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: andrewkr, vasilep, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54093
Summary: Added EventListener::OnTableFileCreationStarted. EventListener::OnTableFileCreated will be called on failure case. User can check creation status via TableFileCreationInfo::status.
Test Plan: unit test.
Reviewers: dhruba, yhchiang, ott, sdong
Reviewed By: sdong
Subscribers: sdong, kradhakrishnan, IslamAbdelRahman, andrewkr, yhchiang, leveldb, ott, dhruba
Differential Revision: https://reviews.facebook.net/D56337
Summary:
Changing several option defaults:
options.max_open_files changes from 5000 to -1
options.base_background_compactions changes from max_background_compactions to 1
options.wal_recovery_mode changes from kTolerateCorruptedTailRecords to kTolerateCorruptedTailRecords
options.compaction_pri changes from kByCompensatedSize to kByCompensatedSize
Test Plan: Write unit tests to see OldDefaults() works as expected.
Reviewers: IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: MarkCallaghan, yiwu, kradhakrishnan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56427
Summary: There were a few narrowing conversions that clang didn't like.
Test Plan:
$ make clean && USE_CLANG=1 DISABLE_JEMALLOC=1 TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make -j32 check
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57351
Summary:
This adds a new metablock containing a shared dictionary that is used
to compress all data blocks in the SST file. The size of the shared dictionary
is configurable in CompressionOptions and defaults to 0. It's currently only
used for zlib/lz4/lz4hc, but the block will be stored in the SST regardless of
the compression type if the user chooses a nonzero dictionary size.
During compaction, computes the dictionary by randomly sampling the first
output file in each subcompaction. It pre-computes the intervals to sample
by assuming the output file will have the maximum allowable length. In case
the file is smaller, some of the pre-computed sampling intervals can be beyond
end-of-file, in which case we skip over those samples and the dictionary will
be a bit smaller. After the dictionary is generated using the first file in a
subcompaction, it is loaded into the compression library before writing each
block in each subsequent file of that subcompaction.
On the read path, gets the dictionary from the metablock, if it exists. Then,
loads that dictionary into the compression library before reading each block.
Test Plan: new unit test
Reviewers: yhchiang, IslamAbdelRahman, cyan, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52287
Summary:
Introduced option to dump malloc statistics using new option flag.
Added new command line option to db_bench tool to enable this
funtionality.
Also extended build to support environments with/without jemalloc.
Test Plan:
1) Build rocksdb using `make` command. Launch the following command
`./db_bench --benchmarks=fillrandom --dump_malloc_stats=true
--num=10000000` end verified that jemalloc dump is present in LOG file.
2) Build rocksdb using `DISABLE_JEMALLOC=1 make db_bench -j32` and ran
the same db_bench tool and found the following message in LOG file:
"Please compile with jemalloc to enable malloc dump".
3) Also built rocksdb using `make` command on MacOS to verify behavior
in non-FB environment.
Also to debug build configuration change temporary changed
AM_DEFAULT_VERBOSITY = 1 in Makefile to see compiler and build
tools output. For case 1) -DROCKSDB_JEMALLOC was present in compiler
command line. For both 2) and 3) this flag was not present.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57321
Islam AbdelRahman