Summary:
Logically strip the user-defined timestamp when L0 files are created during flush when `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` is false. Logically stripping timestamp here means replacing the original user-defined timestamp with a mininum timestamp, which for now is hard coded to be all zeros bytes.
While working on this, I caught a missing piece on the `BlockBuilder` level for this feature. The current quick path `std::min(buffer_size, last_key_size)` needs a bit tweaking to work for this feature. When user-defined timestamp is stripped during block building, on writing first entry or right after resetting, `buffer` is empty and `buffer_size` is zero as usual. However, in follow-up writes, depending on the size of the stripped user-defined timestamp, and the size of the value, what's in `buffer` can sometimes be smaller than `last_key_size`, leading `std::min(buffer_size, last_key_size)` to truncate the `last_key`. Previous test doesn't caught the bug because in those tests, the size of the stripped user-defined timestamps bytes is smaller than the length of the value. In order to avoid the conditional operation, this PR changed the original trivial `std::min` operation into an arithmetic operation. Since this is a change in a hot and performance critical path, I did the following benchmark to check no observable regression is introduced.
```TEST_TMPDIR=/dev/shm/rocksdb1 ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=50000000```
Compiled with DEBUG_LEVEL=0
Test vs. control runs simulaneous for better accuracy, units = ops/sec
PR vs base:
Round 1: 350652 vs 349055
Round 2: 365733 vs 364308
Round 3: 355681 vs 354475
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11557
Test Plan:
New timestamp specific test added or existing tests augmented, both are parameterized with `UserDefinedTimestampTestMode`:
`UserDefinedTimestampTestMode::kNormal` -> UDT feature enabled, write / read with min timestamp
`UserDefinedTimestampTestMode::kStripUserDefinedTimestamps` -> UDT feature enabled, write / read with min timestamp, set Options.persist_user_defined_timestamps to false.
```
make all check
./db_wal_test --gtest_filter="*WithTimestamp*"
./flush_job_test --gtest_filter="*WithTimestamp*"
./repair_test --gtest_filter="*WithTimestamp*"
./block_based_table_reader_test
```
Reviewed By: pdillinger
Differential Revision: D47027664
Pulled By: jowlyzhang
fbshipit-source-id: e729193b6334dfc63aaa736d684d907a022571f5
Summary:
Expose the remaining fields of PlainTableOptions as arguments to `rocksdb_options_set_plain_table_factory` in the C API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11442
Reviewed By: ajkr
Differential Revision: D46786962
Pulled By: hx235
fbshipit-source-id: 8862083dde332bfecc5ff02f9375776ad35c11f5
Summary:
https://github.com/facebook/rocksdb/issues/11378 added a new overloaded `CreateColumnFamilyWithImport` API and updated the virtual function in `StackableDB` and `DBImplReadOnly` to the newly overloaded one. This caused internal error when there is a derived class that tries to override the original `CreateColumnFamilyWithImport` function. This PR adds the original `CreateColumnFamilyWithImport` function back to `StackableDB` and `DBImplReadOnly`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11556
Test Plan: check if this fixes an internal build
Reviewed By: akankshamahajan15
Differential Revision: D46980506
Pulled By: cbi42
fbshipit-source-id: 975a6c5748bf9481499a62ee5997ca59e542e3bc
Summary:
1. Public API change: Replace `use_async_io` API in file_system with `SupportedOps` API which is used by underlying FileSystem to indicate to upper layers whether the FileSystem supports different operations introduced in `enum FSSupportedOps `. Right now operations are `async_io` and whether FS will provide its own buffer during reads or not. The api is changed to extend it to various FileSystem operations in one API rather than creating a separate API for each operation.
2. Provide support for underlying FS to pass their own buffer during Reads (async and sync read) instead of using RocksDB provided `scratch` (buffer) in `FSReadRequest`. Currently only MultiRead supports it and later will be extended to other reads as well (point lookup, scan etc). More details in how to enable in file_system.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11324
Test Plan: Tested locally
Reviewed By: anand1976
Differential Revision: D44465322
Pulled By: akankshamahajan15
fbshipit-source-id: 9ec9e08f839b5cc815e75d5dade6cd549998d0ec
Summary:
Start to record the value of the flag `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` in the Manifest and table properties for a SST file when it is created. And use the recorded flag when creating a table reader for the SST file. This flag's default value is true, it is only explicitly recorded if it's false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11515
Test Plan:
```
make all check
./version_edit_test
```
Reviewed By: ltamasi
Differential Revision: D46920386
Pulled By: jowlyzhang
fbshipit-source-id: 075c20363d3d2cc1368422ecc805617ed135cc26
Summary:
The class `NewCompactOnDeletionCollectorFactory` exposes the parameter `delete_ratio`.
The C API `rocksdb_options_add_compact_on_deletion_collector_factory` does not allow a user to pass a delete ration to be passed down the the C++ class bellow.
The class has default value for the delete ratio which makes it pass the compilation and the tests.
closes https://github.com/facebook/rocksdb/issues/11541
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11542
Reviewed By: ajkr
Differential Revision: D46770908
Pulled By: cbi42
fbshipit-source-id: 7b5162fe459896052e392e2d85a8f6c01db3b464
Summary:
Calling `Flush` (even with `wait==true`) does not guarantee that obsolete WAL files are physically deleted before the call returns. The patch attempts to fix the resulting flakiness by using `SyncPoint`s to make sure `PurgeObsoleteFiles` finishes before checking for WAL deletions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11537
Test Plan:
```
gtest-parallel --repeat=1000 ./db_wal_test --gtest_filter="*SkipDeletedWALs*"
```
Reviewed By: pdillinger
Differential Revision: D46736050
Pulled By: ltamasi
fbshipit-source-id: 47a931b7a3a03ef681fbf4adb5a0b223d452703e
Summary:
after https://github.com/facebook/rocksdb/issues/11321 and https://github.com/facebook/rocksdb/issues/11340 (both included in RocksDB v8.2), migration from `level_compaction_dynamic_level_bytes=false` to `level_compaction_dynamic_level_bytes=true` is automatic by RocksDB and requires no manual compaction from user. Making the option true by default as it has several advantages: 1. better space amplification guarantee (a more stable LSM shape). 2. compaction is more adaptive to write traffic. 3. automatic draining of unneeded levels. Wiki is updated with more detail: https://github.com/facebook/rocksdb/wiki/Leveled-Compaction#option-level_compaction_dynamic_level_bytes-and-levels-target-size.
The PR mostly contains fixes for unit tests as they assumed `level_compaction_dynamic_level_bytes=false`. Most notable change is commit f742be330c and b1928e42b3 which override the default option in DBTestBase to still set `level_compaction_dynamic_level_bytes=false` by default. This helps to reduce the change needed for unit tests. I think this default option override in unit tests is okay since the behavior of `level_compaction_dynamic_level_bytes=true` is tested by explicitly setting this option. Also, `level_compaction_dynamic_level_bytes=false` may be more desired in unit tests as it makes it easier to create a desired LSM shape.
Comment for option `level_compaction_dynamic_level_bytes` is updated to reflect this change and change made in https://github.com/facebook/rocksdb/issues/10057.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11525
Test Plan: `make -j32 J=32 check` several times to try to catch flaky tests due to this option change.
Reviewed By: ajkr
Differential Revision: D46654256
Pulled By: cbi42
fbshipit-source-id: 6b5827dae124f6f1fdc8cca2ac6f6fcd878830e1
Summary:
The original Feature Request is from [https://github.com/facebook/rocksdb/issues/11317](https://github.com/facebook/rocksdb/issues/11317).
Flink uses rocksdb as the state backend, all DB options are the same, and the keys of each DB instance are adjacent and there is no key overlap between two db instances.
In the Flink rescaling scenario, it is necessary to quickly split the DB according to a certain key range or quickly merge multiple DBs into one.
This PR is mainly used to quickly merge multiple DBs into one.
We hope to extend the function of `CreateColumnFamilyWithImports` to support creating ColumnFamily by importing multiple ColumnFamily with no overlapping keys.
The import logic is almost the same as `CreateColumnFamilyWithImport`, but it will check whether there is key overlap between CF when importing. The import will fail if there are key overlaps.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11378
Reviewed By: ajkr
Differential Revision: D46413709
Pulled By: cbi42
fbshipit-source-id: 846d0049fad11c59cf460fa846c345b26c658dfb
Summary:
when a DB is configured with `allow_ingest_behind = true`, the last level should be reserved for ingested files and these files should not be included in any compaction. Currently, a major compaction can compact these files to smaller levels. This can cause future files to be rejected for ingest behind (see `ExternalSstFileIngestionJob::CheckLevelForIngestedBehindFile()`). This PR fixes the issue such that files in the last level is not included in any compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11489
Test Plan: * Updated unit test `ExternalSSTFileTest.IngestBehind` to test that last level is not included in manual and auto-compaction.
Reviewed By: ajkr
Differential Revision: D46455711
Pulled By: cbi42
fbshipit-source-id: 5e2142c2a709ef932ad797897795021c06c4ac8c
Summary:
See "unreleased_history/new_features/obsolete_sst_files_size.md" for description
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11533
Test Plan: updated unit test
Reviewed By: jowlyzhang
Differential Revision: D46703152
Pulled By: ajkr
fbshipit-source-id: ea5e31cd6293eccc154130c13e66b5271f57c102
Summary:
Add new tickers: `rocksdb.error.handler.bg.error.count`, `rocksdb.error.handler.bg.io.error.count`, `rocksdb.error.handler.bg.retryable.io.error.count` to replace the misspelled ones: `rocksdb.error.handler.bg.errro.count`, `rocksdb.error.handler.bg.io.errro.count`, `rocksdb.error.handler.bg.retryable.io.errro.count` ('error' instead of 'errro'). Users should switch to use the new tickers before 9.0 release as the misspelled old tickers will be completely removed then.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11509
Reviewed By: ltamasi
Differential Revision: D46542809
Pulled By: jowlyzhang
fbshipit-source-id: a2a6d8354af46a060de81d40ef6f5336a80bd32e
Summary:
The `rocksdb.db.get.micros` histogram is never updated if the DB is open in ReadOnly mode, as well as the `get_cpu_nanos` perf counter. An earlier PR (https://github.com/facebook/rocksdb/issues/4260) for some reason has only added the TODO line, not the accounting itself, so this one is intended to fix it, adding two lines to match [DBImplSecondary](4dafa5b220/db/db_impl/db_impl_secondary.cc (L366-L367)).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11521
Reviewed By: cbi42
Differential Revision: D46577330
Pulled By: jowlyzhang
fbshipit-source-id: be147923e763af32bbc18fd6bdf3aff8ebf08aee
Summary:
Fix the test added in https://github.com/facebook/rocksdb/issues/11459 that is failing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11512
Test Plan: `./db_range_del_test --gtest_filter="*NonBottommostCompactionDropRangetombstone"`
Reviewed By: pdillinger
Differential Revision: D46451450
Pulled By: cbi42
fbshipit-source-id: bcad20b8fd21c4f71924cec6cb045ee4b2038b90
Summary:
Switch from std::unordered_map to RocksDB UnorderedMap for all the places that logging user-defined timestamp size in WAL used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11507
Test Plan:
```
make all check
```
Reviewed By: ltamasi
Differential Revision: D46448975
Pulled By: jowlyzhang
fbshipit-source-id: bdb4d56a723b697a33daaf0f856a61d49a367a99
Summary:
Similar to point tombstones, we can drop a range tombstone during compaction when we know its range does not exist in any higher level. This PR adds this optimization. Some existing test in db_range_del_test is fixed to work under this optimization.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11459
Test Plan:
* Add unit test `DBRangeDelTest, NonBottommostCompactionDropRangetombstone`.
* Ran crash test that issues range deletion for a few hours: `python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=1048576 --delrangepercent=10 --writepercent=31 --readpercent=40`
Reviewed By: ajkr
Differential Revision: D46007904
Pulled By: cbi42
fbshipit-source-id: 3f37205b6778b7d55ed106369ca41b0632a6d0fd
Summary:
currently for leveled compaction, the max output level of a call to `CompactRange()` is pre-computed before compacting each level. This max output level is the max level whose key range overlaps with the manual compaction key range. However, during manual compaction, files in the max output level may be compacted down further by some background compaction. When this background compaction is a trivial move, there is a race condition and the manual compaction may not be able to compact all keys in the specified key range. This PR updates `CompactRange()` to always compact to the bottommost level to make this race condition more unlikely (it can still happen, see more in comment here: 796f58f42a/db/db_impl/db_impl_compaction_flush.cc (L1180C29-L1184)).
This PR also changes the behavior of CompactRange() when `bottommost_level_compaction=kIfHaveCompactionFilter` (the default option). The old behavior is that, if a compaction filter is provided, CompactRange() always does an intra-level compaction at the final output level for all files in the manual compaction key range. The only exception when `first_overlapped_level = 0` and `max_overlapped_level = 0`. It’s awkward to maintain the same behavior after this PR since we do not compute max_overlapped_level anymore. So the new behavior is similar to kForceOptimized: always does intra-level compaction at the bottommost level, but not including new files generated during this manual compaction.
Several unit tests are updated to work with this new manual compaction behavior.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11468
Test Plan: Add new unit tests `DBCompactionTest.ManualCompactionCompactAllKeysInRange*`
Reviewed By: ajkr
Differential Revision: D46079619
Pulled By: cbi42
fbshipit-source-id: 19d844ba4ec8dc1a0b8af5d2f36ff15820c6e76f
Summary:
Context:
As mentioned in https://github.com/facebook/rocksdb/issues/11436, introducing `flush` option in `WaitForCompactOptions` to flush before waiting for compactions to finish. Must be set to true to ensure no immediate compactions (except perhaps periodic compactions) after closing and re-opening the DB.
1. `bool flush = false` added to `WaitForCompactOptions`
2. `DBImpl::FlushAllColumnFamilies()` is introduced and `DBImpl::FlushForGetLiveFiles()` is refactored to call it.
3. `DBImpl::FlushAllColumnFamilies()` gets called before waiting in `WaitForCompact()` if `flush` option is `true`
4. Some previous WaitForCompact tests were parameterized to include both cases for `abort_on_pause_` being true/false as well as `flush_` being true/false
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11483
Test Plan:
- `DBCompactionTest::WaitForCompactWithOptionToFlush` added
- Changed existing DBCompactionTest::WaitForCompact tests to `DBCompactionWaitForCompactTest` to include params
Reviewed By: pdillinger
Differential Revision: D46289770
Pulled By: jaykorean
fbshipit-source-id: 70d3f461d96a6e06390be60170dd7c4d0d38f8b0
Summary:
Start logging the timestamp size record in WAL and use the record during recovery. Currently, user comparator cannot be different from what was used to create a column family, so the timestamp size record is just used to confirm it's consistent with the timestamp size the running user comparator indicates.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11471
Test Plan:
```
make all check
./db_secondary_test
./db_wal_test --gtest_filter="*WithTimestamp*"
./repair_test --gtest_filter="*WithTimestamp*"
```
Reviewed By: ltamasi
Differential Revision: D46236769
Pulled By: jowlyzhang
fbshipit-source-id: f6c60b5c8defdb05021c63df302ccc0be1275ad0
Summary:
Together with the existing constructor,
`explicit WriteBatch(std::string&& rep)`, this enables transferring `WriteBatch` via its `std::string` representation. Associated info like KV checksums are dropped but the caller can use `WriteBatch::VerifyChecksum()` before taking ownership if needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11482
Reviewed By: cbi42
Differential Revision: D46233884
Pulled By: ajkr
fbshipit-source-id: 6bc64a6e75fb7bbf61d08c09520fc3705a7b44d8
Summary:
`output_level_` and `number_levels_` are not changing in iteration of `inputs_` files.
Moving the check out of `for` loop could slightly improve performance.
It is easier to review when ignore whitespace changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11467
Reviewed By: cbi42
Differential Revision: D46155962
Pulled By: ajkr
fbshipit-source-id: 45ec80b13152b3bed7305e6f707cb9b187d5f315
Summary:
Context:
This is the first PR for WaitForCompact() Implementation with WaitForCompactOptions. In this PR, we are introducing `Status WaitForCompact(const WaitForCompactOptions& wait_for_compact_options)` in the public API. This currently utilizes the existing internal `WaitForCompact()` implementation (with default abort_on_pause = false). `abort_on_pause` has been moved to `WaitForCompactOptions&`. In the later PRs, we will introduce the following two options in `WaitForCompactOptions`
1. `bool flush = false` by default - If true, flush before waiting for compactions to finish. Must be set to true to ensure no immediate compactions (except perhaps periodic compactions) after closing and re-opening the DB.
2. `bool close_db = false` by default - If true, will also close the DB upon compactions finishing.
1. struct `WaitForCompactOptions` added to options.h and `abort_on_pause` in the internal API moved to the option struct.
2. `Status WaitForCompact(const WaitForCompactOptions& wait_for_compact_options)` introduced in `db.h`
3. Changed the internal WaitForCompact() to `WaitForCompact(const WaitForCompactOptions& wait_for_compact_options)` and checks for the `abort_on_pause` inside the option.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11436
Test Plan:
Following tests added
- `DBCompactionTest::WaitForCompactWaitsOnCompactionToFinish`
- `DBCompactionTest::WaitForCompactAbortOnPauseAborted`
- `DBCompactionTest::WaitForCompactContinueAfterPauseNotAborted`
- `DBCompactionTest::WaitForCompactShutdownWhileWaiting`
- `TransactionTest::WaitForCompactAbortOnPause`
NOTE: `TransactionTest::WaitForCompactAbortOnPause` was added to use `StackableDB` to ensure the wrapper function is in place.
Reviewed By: pdillinger
Differential Revision: D45799659
Pulled By: jaykorean
fbshipit-source-id: b5b58f95957f2ab47d1221dee32a61d6cdc4685b
Summary:
This patch adds support in `BlockBuilder` to strip user-defined timestamp from the `key` added via `Add(key, value)` and its equivalent APIs. The stripping logic is different when the key is either a user key or an internal key, so the `BlockBuilder` is created with a flag to indicate that. This patch also add support on the read path to APIs `NewIndexIterator`, `NewDataIterator` to support pad a min timestamp.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11472
Test Plan:
Three test modes are added to parameterize existing tests:
UserDefinedTimestampTestMode::kNone -> UDT feature is not enabled
UserDefinedTimestampTestMode::kNormal -> UDT feature enabled, write / read with min timestamp
UserDefinedTimestampTestMode::kStripUserDefinedTimestamps -> UDT feature enabled, write / read with min timestamp, set `persist_user_defined_timestamps` where it applies to false.
The tests read/write with min timestamp so that point read and range scan can correctly read values in all three test modes.
`block_test` are parameterized to run with above three test modes and some additional parameteriazation
```
make all check
./block_test --gtest_filter="P/BlockTest*"
./block_test --gtest_filter="P/IndexBlockTest*"
```
Reviewed By: ltamasi
Differential Revision: D46200539
Pulled By: jowlyzhang
fbshipit-source-id: 59f5d6b584639976b69c2943eba723bd47d9b3c0
Summary:
Currently it's easy to use a ton of memory with many small OptimisticTransactionDB instances, because each one by default allocates a million mutexes (40 bytes each on my compiler) for validating transactions. It even puts a lot of pressure on the allocator by allocating each one individually!
In this change:
* Create a new object and option that enables sharing these buckets of mutexes between instances. This is generally good for load balancing potential contention as various DBs become hotter or colder with txn writes. About the only cases where this sharing wouldn't make sense (e.g. each DB usually written by one thread) are cases that would be better off with OccValidationPolicy::kValidateSerial which doesn't use the buckets anyway.
* Allocate the mutexes in a contiguous array, for efficiency
* Add an option to ensure the mutexes are cache-aligned. In several other places we use cache-aligned mutexes but OptimisticTransactionDB historically does not. It should be a space-time trade-off the user can choose.
* Provide some visibility into the memory used by the mutex buckets with an ApproximateMemoryUsage() function (also used in unit testing)
* Share code with other users of "striped" mutexes, appropriate refactoring for customization & efficiency (e.g. using FastRange instead of modulus)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11439
Test Plan: unit tests added. Ran sized-up versions of stress test in unit test, including a before-and-after performance test showing no consistent difference. (NOTE: OptimisticTransactionDB not currently covered by db_stress!)
Reviewed By: ltamasi
Differential Revision: D45796393
Pulled By: pdillinger
fbshipit-source-id: ae2b3a26ad91ceeec15debcdc63ff48df6736a54
Summary:
Do not bother comparing the version of the local super version handle with the global one.
An inequality comparison result indicates nothing but a spurious obsoleteness. It only happens when the writer has increased the `ColumnFamilyData::super_version_number_`(5fc57eec2b/db/column_family.cc (L1309)) but has not yet called `ResetThreadLocalSuperVersions()`(5fc57eec2b/db/column_family.cc (L1328)) at the time when a reader reads the local handle(`void* ptr = local_sv_->Swap(SuperVersion::kSVInUse);`). In other words, the existence of a local handle is a sufficent evidence of its fressness.
With this PR, we save one or even two atomic instructions when getting a handle of super version.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11452
Reviewed By: ajkr
Differential Revision: D46059317
Pulled By: cbi42
fbshipit-source-id: 68b4b1ca8a9929a4aa470105c37a09e0625b014d
Summary:
Add a util method `HandleWriteBatchTimestampSizeDifference` to handle a `WriteBatch` read from WAL log when user-defined timestamp size record is written and read. Two check modes are added: `kVerifyConsistency` that just verifies the recorded timestamp size are consistent with the running ones. This mode is to be used by `db_impl_secondary` for opening a DB as secondary instance. It will also be used by `db_impl_open` before the user comparator switch support is added to make a column switch between enabling/disable UDT feature. The other mode `kReconcileInconsistency` will be used by `db_impl_open` later when user comparator can be changed.
Another change is to extract a method `CollectColumnFamilyIdsFromWriteBatch` in db_secondary_impl.h into its standalone util file so it can be shared.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11451
Test Plan:
```
make check
./udt_util_test
```
Reviewed By: ltamasi
Differential Revision: D45894386
Pulled By: jowlyzhang
fbshipit-source-id: b96790777f154cddab6d45d9ba2e5d20ebc6fe9d
Summary:
We want to know more about opportunities for better range filters, and the effectiveness of our own range filters. Currently the stats are very limited, essentially logging just hits and misses against prefix filters for range scans in BLOOM_FILTER_PREFIX_* without tracking the false positive rate. Perhaps confusingly, when prefix filters are used for point queries, the stats are currently going into the non-PREFIX tickers.
This change does several things:
* Introduce new stat tickers for seeks and related filtering, \*LEVEL_SEEK\*
* Most importantly, allows us to see opportunities for range filtering. Specifically, we can count how many times a seek in an SST file accesses at least one data block, and how many times at least one value() is then accessed. If a data block was accessed but no value(), we can generally assume that the key(s) seen was(were) not of interest so could have been filtered with the right kind of filter, avoiding the data block access.
* We can get the same level of detail when a filter (for now, prefix Bloom/ribbon) is used, or not. Specifically, we can infer a false positive rate for prefix filters (not available before) from the seek "false positive" rate: when a data block is accessed but no value() is called. (There can be other explanations for a seek false positive, but in typical iterator usage it would indicate a filter false positive.)
* For efficiency, I wanted to avoid making additional calls to the prefix extractor (or key comparisons, etc.), which would be required if we wanted to more precisely detect filter false positives. I believe that instrumenting value() is the best balance of efficiency vs. accurately measuring what we are often interested in.
* The stats are divided between last level and non-last levels, to help understand potential tiered storage use cases.
* The old BLOOM_FILTER_PREFIX_* stats have a different meaning: no longer referring to iterators but to point queries using prefix filters. BLOOM_FILTER_PREFIX_TRUE_POSITIVE is added for computing the prefix false positive rate on point queries, which can be due to filter false positives as well as different keys with the same prefix.
* Similarly, the non-PREFIX BLOOM_FILTER stats are now for whole key filtering only.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11460
Test Plan:
unit tests updated, including updating many to pop the stat value since last read to improve test
readability and maintainability.
Performance test shows a consistent small improvement with these changes, both with clang and with gcc. CPU profile indicates that RecordTick is using less CPU, and this makes sense at least for a high filter miss rate. Before, we were recording two ticks per filter miss in iterators (CHECKED & USEFUL) and now recording just one (FILTERED).
Create DB with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8
```
And run simultaneous before&after with
```
TEST_TMPDIR=/dev/shm ./db_bench -readonly -benchmarks=seekrandom[-X1000] -num=10000000 -bloom_bits=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8 -seek_nexts=1 -duration=20 -seed=43 -threads=8 -cache_size=1000000000 -statistics
```
Before: seekrandom [AVG 275 runs] : 189680 (± 222) ops/sec; 18.4 (± 0.0) MB/sec
After: seekrandom [AVG 275 runs] : 197110 (± 208) ops/sec; 19.1 (± 0.0) MB/sec
Reviewed By: ajkr
Differential Revision: D46029177
Pulled By: pdillinger
fbshipit-source-id: cdace79a2ea548d46c5900b068c5b7c3a02e5822
Summary:
Add two type aliases for Cache: BlockCache and GeneralCache, and add LRUCacheOptions::MakeSharedGeneralCache(). This will ease upgrade to an intended future change to separate the cache API between block cache and other (general) uses, including row cache. Separating the APIs will make it easier to expose more details of block caching for customization. For example, it would be nice to pass the file unique ID and offset as the logical cache key instead of using a Slice, which could facilitate some file-specific customizations in block cache. This would also make it clear that HyperClockCache is not usable as a general cache, because it can only deal with fixed-size block cache keys.
block_cache, row_cache, and blob_cache are the uses of Cache in the public API. blob_cache should be able to use BlockCache while row_cache is a GeneralCache user, as its keys are of arbitrary size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11450
Test Plan: see updated unit test.
Reviewed By: anand1976
Differential Revision: D45882067
Pulled By: pdillinger
fbshipit-source-id: ff5d9f0b644f87ae337a29a7728ce3ed07b2a4b2
Summary:
This PR is part of the request https://github.com/facebook/rocksdb/issues/11317.
(Another part is https://github.com/facebook/rocksdb/pull/11378)
ClipDB() will clip the entries in the CF according to the range [begin_key, end_key). All the entries outside this range will be completely deleted (including tombstones).
This feature is mainly used to ensure that there is no overlapping Key when calling CreateColumnFamilyWithImports() to import multiple CFs.
When Calling ClipDB [begin, end), there are the following steps
1. Quickly and directly delete files without overlap
DeleteFilesInRanges(nullptr, begin) + DeleteFilesInRanges(end, nullptr)
2. Delete the Key outside the range
Delete[smallest_key, begin) + Delete[end, largest_key]
3. Delete the tombstone through Manul Compact
CompactRange(option, nullptr, nullptr)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11379
Reviewed By: ajkr
Differential Revision: D45840358
Pulled By: cbi42
fbshipit-source-id: 54152e8a45fd8ede137f99787eb252f0b51440a4
Summary:
Context:
In pull request https://github.com/facebook/rocksdb/issues/11436, we are introducing a new public API `waitForCompact(const WaitForCompactOptions& wait_for_compact_options)`. This API invokes the internal implementation `waitForCompact(bool wait_unscheduled=false)`. The unscheduled parameter indicates the compactions that are not yet scheduled but are required to process items in the queue.
In certain cases, we are unable to wait for compactions, such as during a shutdown or when background jobs are paused. It is important to return the appropriate status in these scenarios. For all other cases, we should wait for all compaction and flush jobs, including the unscheduled ones. The primary purpose of this new API is to wait until the system has resolved its compaction debt. Currently, the usage of `wait_unscheduled` is limited to test code.
This pull request eliminates the usage of wait_unscheduled. The internal `waitForCompact()` API now waits for unscheduled compactions unless the db is undergoing a shutdown. In the event of a shutdown, the API returns `Status::ShutdownInProgress()`.
Additionally, a new parameter, `abort_on_pause`, has been introduced with a default value of `false`. This parameter addresses the possibility of waiting indefinitely for unscheduled jobs if `PauseBackgroundWork()` was called before `waitForCompact()` is invoked. By setting `abort_on_pause` to `true`, the API will immediately return `Status::Aborted`.
Furthermore, all tests that previously called `waitForCompact(true)` have been fixed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11443
Test Plan:
Existing tests that involve a shutdown in progress:
- DBCompactionTest::CompactRangeShutdownWhileDelayed
- DBTestWithParam::PreShutdownMultipleCompaction
- DBTestWithParam::PreShutdownCompactionMiddle
Reviewed By: pdillinger
Differential Revision: D45923426
Pulled By: jaykorean
fbshipit-source-id: 7dc93fe6a6841a7d9d2d72866fa647090dba8eae
Summary:
In IDE navigation I find it annoying that there are two statistics.h files (etc.) and often land on the wrong one. Here I migrate several headers to use the blah.h <- blah_impl.h <- blah.cc idiom. Although clang-format wants "blah.h" to be the top include for "blah.cc", I think overall this is an improvement.
No public API changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11408
Test Plan: existing tests
Reviewed By: ltamasi
Differential Revision: D45456696
Pulled By: pdillinger
fbshipit-source-id: 809d931253f3272c908cf5facf7e1d32fc507373
Summary:
When the DB is opened, RocksDB creates a temp OPTIONS file, writes the current options to it, and renames it. In case of a failure, the temp file is left behind, and is not deleted by PurgeObsoleteFiles(). Fix this by explicitly deleting the temp file if writing to it or renaming it fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11423
Test Plan: Add a unit test
Reviewed By: akankshamahajan15
Differential Revision: D45540454
Pulled By: anand1976
fbshipit-source-id: 47facdc30d8cc5667036312d04b21d3fc253c92e
Summary:
Added a ticker stat, `BLOCK_CHECKSUM_MISMATCH_COUNT`, to count how many block checksum verifications detected a mismatch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11438
Test Plan: new unit test
Reviewed By: pdillinger
Differential Revision: D45788179
Pulled By: ajkr
fbshipit-source-id: e2b44eba7c23b3e110ebe69eaa78a710dec2590f
Summary:
This patch adds support to write and read a user-defined timestamp size record in log writer and log reader. It will be used by WAL logs to persist the user-defined timestamp format for subsequent WriteBatch records. Reading and writing UDT sizes for WAL logs are not included in this patch. It will be in a follow up.
The syntax for the record is: at write time, one such record is added when log writer encountered any non-zero UDT size it hasn't recorded so far. At read time, all such records read up to a point are accumulated and applicable to all subsequent WriteBatch records.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11433
Test Plan:
```
make clean && make -j32 all
./log_test --gtest_filter="*WithTimestampSize*"
```
Reviewed By: ltamasi
Differential Revision: D45678708
Pulled By: jowlyzhang
fbshipit-source-id: b770c8f45bb7b9383b14aac9f22af781304fb41d
Summary:
- Add a new option `CompactionOptionsFIFO::file_temperature_age_thresholds` that allows user to specify age thresholds for compacting files to different temperatures. File temperature can be used to store files in different storage media. The new options allows specifying multiple temperature-age pairs. The option uses struct for a temperature-age pair to use the existing parsing functionality to make the option dynamically settable.
- Deprecate the old option `age_for_warm` that was added for a similar purpose.
- Compaction score calculation logic is updated to check if a file needs to be compacted to change its temperature.
- Some refactoring is done in `FIFOCompactionPicker::PickTemperatureChangeCompaction`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11428
Test Plan: adapted unit tests that were for `age_for_warm` to this new option.
Reviewed By: ajkr
Differential Revision: D45611412
Pulled By: cbi42
fbshipit-source-id: 2dc384841f61cc04abb9681e31aa2de0f0b06106
Summary:
See motivation and description in new ShardedCacheOptions::hash_seed option.
Updated db_bench so that its seed param is used for the cache hash seed.
Made its code more safe to ensure seed is set before use.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11391
Test Plan:
unit tests added / updated
**Performance** - no discernible difference seen running cache_bench repeatedly before & after. With lru_cache and hyper_clock_cache.
Reviewed By: hx235
Differential Revision: D45557797
Pulled By: pdillinger
fbshipit-source-id: 40bf4da6d66f9d41a8a0eb8e5cf4246a4aa07934
Summary:
Fix build error: variable 'base_level' may be uninitialized
```
db_impl_compaction_flush.cc:1195:21: error: variable 'base_level' may be uninitialized when used here [-Werror,-Wconditional-uninitialized]
level = base_level;
```
^~~~~~~~~~
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11435
Test Plan: CircleCI jobs
Reviewed By: cbi42
Differential Revision: D45708176
Pulled By: akankshamahajan15
fbshipit-source-id: 851b1205b22b63d728495e5735fa91b0ad8e012b
Summary:
**Context:**
We prefetch the tail part of a SST file (i.e, the blocks after data blocks till the end of the file) during each SST file open in hope to prefetch all the stuff at once ahead of time for later read e.g, footer, meta index, filter/index etc. The existing approach to estimate the tail size to prefetch is through `TailPrefetchStats` heuristics introduced in https://github.com/facebook/rocksdb/pull/4156, which has caused small reads in unlucky case (e.g, small read into the tail buffer during table open in thread 1 under the same BlockBasedTableFactory object can make thread 2's tail prefetching use a small size that it shouldn't) and is hard to debug. Therefore we decide to record the exact tail size and use it directly to prefetch tail of the SST instead of relying heuristics.
**Summary:**
- Obtain and record in manifest the tail size in `BlockBasedTableBuilder::Finish()`
- For backward compatibility, we fall back to TailPrefetchStats and last to simple heuristics that the tail size is a linear portion of the file size - see PR conversation for more.
- Make`tail_start_offset` part of the table properties and deduct tail size to record in manifest for external files (e.g, file ingestion, import CF) and db repair (with no access to manifest).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11406
Test Plan:
1. New UT
2. db bench
Note: db bench on /tmp/ where direct read is supported is too slow to finish and the default pinning setting in db bench is not helpful to profile # sst read of Get. Therefore I hacked the following to obtain the following comparison.
```
diff --git a/table/block_based/block_based_table_reader.cc b/table/block_based/block_based_table_reader.cc
index bd5669f0f..791484c1f 100644
--- a/table/block_based/block_based_table_reader.cc
+++ b/table/block_based/block_based_table_reader.cc
@@ -838,7 +838,7 @@ Status BlockBasedTable::PrefetchTail(
&tail_prefetch_size);
// Try file system prefetch
- if (!file->use_direct_io() && !force_direct_prefetch) {
+ if (false && !file->use_direct_io() && !force_direct_prefetch) {
if (!file->Prefetch(prefetch_off, prefetch_len, ro.rate_limiter_priority)
.IsNotSupported()) {
prefetch_buffer->reset(new FilePrefetchBuffer(
diff --git a/tools/db_bench_tool.cc b/tools/db_bench_tool.cc
index ea40f5fa0..39a0ac385 100644
--- a/tools/db_bench_tool.cc
+++ b/tools/db_bench_tool.cc
@@ -4191,6 +4191,8 @@ class Benchmark {
std::shared_ptr<TableFactory>(NewCuckooTableFactory(table_options));
} else {
BlockBasedTableOptions block_based_options;
+ block_based_options.metadata_cache_options.partition_pinning =
+ PinningTier::kAll;
block_based_options.checksum =
static_cast<ChecksumType>(FLAGS_checksum_type);
if (FLAGS_use_hash_search) {
```
Create DB
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
ReadRandom
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
(a) Existing (Use TailPrefetchStats for tail size + use seperate prefetch buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 3395
rocksdb.sst.read.micros P50 : 5.655570 P95 : 9.931396 P99 : 14.845454 P100 : 585.000000 COUNT : 999905 SUM : 6590614
```
(b) This PR (Record tail size + use the same tail buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 14257
rocksdb.sst.read.micros P50 : 5.173347 P95 : 9.015017 P99 : 12.912610 P100 : 228.000000 COUNT : 998547 SUM : 5976540
```
As we can see, we increase the prefetch tail hit count and decrease SST read count with this PR
3. Test backward compatibility by stepping through reading with post-PR code on a db generated pre-PR.
Reviewed By: pdillinger
Differential Revision: D45413346
Pulled By: hx235
fbshipit-source-id: 7d5e36a60a72477218f79905168d688452a4c064
Summary:
the test is flaky when compiled with `make -j56 COERCE_CONTEXT_SWITCH=1 ./db_universal_compaction_test`. The cause is that a manual compaction `CompactRange()` can finish and return before obsolete files are deleted. One reason for this is that a manual compaction waits until `manual.done` is set here 62fc15f009/db/db_impl/db_impl_compaction_flush.cc (L1978)
and the compaction thread can set `manual.done`:
62fc15f009/db/db_impl/db_impl_compaction_flush.cc (L3672)
and then temporarily release mutex_:
62fc15f009/db/db_impl/db_impl_files.cc (L317)
before purging obsolete files:
62fc15f009/db/db_impl/db_impl_compaction_flush.cc (L3144)
With `COERCE_CONTEXT_SWITCH=1`, `bg_cv_.SignalAll()` is called during `mutex_.Lock()`, so the manual compaction thread can wake up and return before obsolete files are deleted. Updated the test to only count live SST files.
Also updated `FindObsoleteFiles()` to avoid locking a locked mutex.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11412
Test Plan: `make -j56 COERCE_CONTEXT_SWITCH=1 ./db_universal_compaction_test`
Reviewed By: ajkr
Differential Revision: D45342242
Pulled By: cbi42
fbshipit-source-id: 955c9796aa3f484e3557d300f97cffacb3ed9b0c
Summary:
when I use g++-13 to exec the `make all` command, the output throws the warnings.
```
db/compaction/compaction_job_test.cc: In member function ‘void rocksdb::CompactionJobTestBase::AddMockFile(const rocksdb::mock::KVVector&, int)’:
db/compaction/compaction_job_test.cc:376:57: error: redundant move in initialization [-Werror=redundant-move]
376 | env_, GenerateFileName(file_number), std::move(contents)));
| ~~~~~~~~~^~~~~~~~~~
db/compaction/compaction_job_test.cc:375:7: note: in expansion of macro ‘EXPECT_OK’
375 | EXPECT_OK(mock_table_factory_->CreateMockTable(
| ^~~~~~~~~
db/compaction/compaction_job_test.cc:376:57: note: remove ‘std::move’ call
376 | env_, GenerateFileName(file_number), std::move(contents)));
| ~~~~~~~~~^~~~~~~~~~
db/compaction/compaction_job_test.cc:375:7: note: in expansion of macro ‘EXPECT_OK’
375 | EXPECT_OK(mock_table_factory_->CreateMockTable(
| ^~~~~~~~~
cc1plus: all warnings being treated as errors
make: *** [Makefile:2507: db/compaction/compaction_job_test.o] Error 1
```
and I also add some `(void)unused_variable` statements because of the cmake argument `-Wunused-but-set-variable -Wunused-but-set-variable`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11418
Reviewed By: akankshamahajan15
Differential Revision: D45528223
Pulled By: ajkr
fbshipit-source-id: fee1a77c30039a56b481de953f0a834cc788abbc
Yu Zhang