Summary:
The patch adds support for writing blob files during flush by integrating
`BlobFileBuilder` with the flush logic, most importantly, `BuildTable` and
`CompactionIterator`. If `enable_blob_files` is set, large values are extracted
to blob files and replaced with references. The resulting blob files are then
logged to the MANIFEST as part of the flush job's `VersionEdit` and
added to the `Version`, similarly to table files. Errors related to writing
blob files fail the flush, and any blob files written by such jobs are immediately
deleted (again, similarly to how SST files are handled). In addition, the patch
extends the logging and statistics around flushes to account for the presence
of blob files (e.g. `InternalStats::CompactionStats::bytes_written`, which is
used for calculating write amplification, now considers the blob files as well).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7345
Test Plan: Tested using `make check` and `db_bench`.
Reviewed By: riversand963
Differential Revision: D23506369
Pulled By: ltamasi
fbshipit-source-id: 646885f22dfbe063f650d38a1fedc132f499a159
Summary:
Replace FSWritableFile pointer with FSWritableFilePtr
object in WritableFileWriter.
This new object wraps FSWritableFile pointer.
Objective: If tracing is enabled, FSWritableFile Ptr returns
FSWritableFileTracingWrapper pointer that includes all necessary
information in IORecord and calls underlying FileSystem and invokes
IOTracer to dump that record in a binary file. If tracing is disabled
then, underlying FileSystem pointer is returned directly.
FSWritableFilePtr wrapper class is added to bypass the
FSWritableFileWrapper when
tracing is disabled.
Test Plan: make check -j64
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7193
Reviewed By: anand1976
Differential Revision: D23355915
Pulled By: akankshamahajan15
fbshipit-source-id: e62a27a13c1fd77e36a6dbafc7006d969bed25cf
Summary:
Replace FSRandomAccessFile pointer with FSRandomAccessFilePtr
object in RandomAccessFileReader.
This new object wraps FSRandomAccessFile pointer.
Objective: If tracing is enabled, FSRandomAccessFile Ptr returns
FSRandomAccessFileTracingWrapper pointer that includes all necessary
information in IORecord and calls underlying FileSystem and invokes
IOTracer to dump that record in a binary file. If tracing is disabled
then, underlying FileSystem pointer is returned directly.
FSRandomAccessFilePtr wrapper class is added to bypass the FSRandomAccessFileWrapper when
tracing is disabled.
Test Plan: make check -j64
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7192
Reviewed By: anand1976
Differential Revision: D23356867
Pulled By: akankshamahajan15
fbshipit-source-id: 48f31168166a17a7444b40be44a9a9d4a5c7182c
Summary:
As part of the IOTracing project, this PR
1. Caches "FileSystemPtr" object(wrapper class that returns file system pointer based on tracing enabled) instead of "FileSystem" pointer.
2. FileSystemPtr object is created using FileSystem pointer and IOTracer
pointer.
3. IOTracer shared_ptr is created in DBImpl and it is passed to different classes through constructor.
4. When tracing is enabled through DB::StartIOTrace, FileSystemPtr
returns FileSystemTracingWrapper pointer for tracing purpose and when
it is disabled underlying FileSystem pointer is returned.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7180
Test Plan:
make check -j64
COMPILE_WITH_TSAN=1 make check -j64
Reviewed By: anand1976
Differential Revision: D22987117
Pulled By: akankshamahajan15
fbshipit-source-id: 6073617e4c2d5bc363914f3a1f55ae3b0a58fbf1
Summary:
There currently exist multiple `GetChildren()` calls in `DBImpl::Recover()`, which can be expensive in cases of distributed file systems.
This pull request try to call `DBImpl::Recover()` of each necessary directory only _once_ and reuse the results in the places of repeated calls in current code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7044
Test Plan:
Run `make check` and use the default test suite. The modified code should be semantically identical to the current code. As a proof of this solution, we may optionally deploy the system onto a (real or simulated) distributed system and expect reduced latency caused by manifest fetching.
(WIP)
Reviewed By: riversand963
Differential Revision: D22419925
Pulled By: roghnin
fbshipit-source-id: d3774fbfbc246c5527101bc16747eb5c90919886
Summary:
`db_id` and `db_session_id` are now part of the table properties for all formats and stored in SST files. This adds about 99 bytes to each new SST file.
The `TablePropertiesNames` for these two identifiers are `rocksdb.creating.db.identity` and `rocksdb.creating.session.identity`.
In addition, SST files generated from SstFileWriter and Repairer have DB identity “SST Writer” and “DB Repairer”, respectively. Their DB session IDs are generated in the same way as `DB::GetDbSessionId`.
A table property test is added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6983
Test Plan: make check and some manual tests.
Reviewed By: zhichao-cao
Differential Revision: D22048826
Pulled By: gg814
fbshipit-source-id: afdf8c11424a6f509b5c0b06dafad584a80103c9
Summary:
Memory pinned by `pin_l0_filter_and_index_blocks_in_cache` needs to be predictable based on user config. This PR makes sure
we do not pin extra memory for large files generated by intra-L0 (see https://github.com/facebook/rocksdb/issues/6889).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6911
Test Plan: unit test
Reviewed By: siying
Differential Revision: D21835818
Pulled By: ajkr
fbshipit-source-id: a11a088549d06bed8aacc2548d266e5983f0ead4
Summary:
Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype.
Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling.
It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas.
Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621
Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats.
Reviewed By: siying
Differential Revision: D20786930
Pulled By: al13n321
fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.
The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487
Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check
Reviewed By: anand1976
Differential Revision: D20685017
Pulled By: zhichao-cao
fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
Summary:
The current Env/FileSystem API separation has a couple of issues -
1. It requires the user to specify 2 options - ```Options::env``` and ```Options::file_system``` - which means they have to make code changes to benefit from the new APIs. Furthermore, there is a risk of accessing the same APIs in two different ways, through Env in the old way and through FileSystem in the new way. The two may not always match, for example, if env is ```PosixEnv``` and FileSystem is a custom implementation. Any stray RocksDB calls to env will use the ```PosixEnv``` implementation rather than the file_system implementation.
2. There needs to be a simple way for the FileSystem developer to instantiate an Env for backward compatibility purposes.
This PR solves the above issues and simplifies the migration in the following ways -
1. Embed a shared_ptr to the ```FileSystem``` in the ```Env```, and remove ```Options::file_system``` as a configurable option. This way, no code changes will be required in application code to benefit from the new API. The default Env constructor uses a ```LegacyFileSystemWrapper``` as the embedded ```FileSystem```.
1a. - This also makes it more robust by ensuring that even if RocksDB
has some stray calls to Env APIs rather than FileSystem, they will go
through the same object and thus there is no risk of getting out of
sync.
2. Provide a ```NewCompositeEnv()``` API that can be used to construct a
PosixEnv with a custom FileSystem implementation. This eliminates an
indirection to call Env APIs, and relieves the FileSystem developer of
the burden of having to implement wrappers for the Env APIs.
3. Add a couple of missing FileSystem APIs - ```SanitizeEnvOptions()``` and
```NewLogger()```
Tests:
1. New unit tests
2. make check and make asan_check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6552
Reviewed By: riversand963
Differential Revision: D20592038
Pulled By: anand1976
fbshipit-source-id: c3801ad4153f96d21d5a3ae26c92ba454d1bf1f7
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
In the current code base, RocksDB generate the checksum for each block and verify the checksum at usage. Current PR enable SST file checksum. After a SST file is generated by Flush or Compaction, RocksDB generate the SST file checksum and store the checksum value and checksum method name in the vs_info and MANIFEST as part for the FileMetadata.
Added the enable_sst_file_checksum to Options to enable or disable file checksum. Added sst_file_checksum to Options such that user can plugin their own SST file checksum calculate method via overriding the SstFileChecksum class. The checksum information inlcuding uint32_t checksum value and a checksum name (string). A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST. If user enables the file checksum but does not provide the sst_file_checksum instance, RocksDB will use the default crc32checksum implemented in table/sst_file_checksum_crc32c.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6216
Test Plan: Added the testing case in table_test and ldb_cmd_test to verify checksum is correct in different level. Pass make asan_check.
Differential Revision: D19171461
Pulled By: zhichao-cao
fbshipit-source-id: b2e53479eefc5bb0437189eaa1941670e5ba8b87
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
Summary:
options.periodic_compaction_seconds isn't supported when options.max_open_files != -1. It's because that the information of file creation time is stored in table properties and are not guaranteed to be loaded unless options.max_open_files = -1. Relax this constraint by storing the information in manifest.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6090
Test Plan: Pass all existing tests; Modify an existing test to force the manifest value to take 0 to simulate backward compatibility case; manually open the DB generated with the change by release 4.2.
Differential Revision: D18702268
fbshipit-source-id: 13e0bd94f546498a04f3dc5fc0d9dff5125ec9eb
Summary:
Previously, options.ttl cannot be set with options.max_open_files = -1, because it makes use of creation_time field in table properties, which is not available unless max_open_files = -1. With this commit, the information will be stored in manifest and when it is available, will be used instead.
Note that, this change will break forward compatibility for release 5.1 and older.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6060
Test Plan: Extend existing test case to options.max_open_files != -1, and simulate backward compatility in one test case by forcing the value to be 0.
Differential Revision: D18631623
fbshipit-source-id: 30c232a8672de5432ce9608bb2488ecc19138830
Summary:
This is groundwork for adding garbage collection support to BlobDB. The
patch adds logic that keeps track of the oldest blob file referred to by
each SST file. The oldest blob file is identified during flush/
compaction (similarly to how the range of keys covered by the SST is
identified), and persisted in the manifest as a custom field of the new
file edit record. Blob indexes with TTL are ignored for the purposes of
identifying the oldest blob file (since such blob files are cleaned up by the
TTL logic in BlobDB).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5903
Test Plan:
Added new unit tests; also ran db_bench in BlobDB mode, inspected the
manifest using ldb, and confirmed (by scanning the SST files using
sst_dump) that the value of the oldest blob file number field matches
the contents of the file for each SST.
Differential Revision: D17859997
Pulled By: ltamasi
fbshipit-source-id: 21662c137c6259a6af70446faaf3a9912c550e90
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803
Test Plan: Build whole project using make and cmake.
Differential Revision: D17374550
fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
This PR adds more callers for table readers. These information are only used for block cache analysis so that we can know which caller accesses a block.
1. It renames the BlockCacheLookupCaller to TableReaderCaller as passing the caller from upstream requires changes to table_reader.h and TableReaderCaller is a more appropriate name.
2. It adds more table reader callers in table/table_reader_caller.h, e.g., kCompactionRefill, kExternalSSTIngestion, and kBuildTable.
This PR is long as it requires modification of interfaces in table_reader.h, e.g., NewIterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5454
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32.
Differential Revision: D15819451
Pulled By: HaoyuHuang
fbshipit-source-id: b6caa704c8fb96ddd15b9a934b7e7ea87f88092d
Summary:
This PR integrates the block cache tracer class into db_impl.cc.
db_impl.cc contains a member variable of AtomicBlockCacheTraceWriter class and passes its reference to the block_based_table_reader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5433
Differential Revision: D15728016
Pulled By: HaoyuHuang
fbshipit-source-id: 23d5659e8c82d556833dcc1a5558aac8c1f7db71
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
util/ means for lower level libraries, so it's a good idea to move the files which requires knowledge to DB out. Create a file/ and move some files there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5375
Differential Revision: D15550935
Pulled By: siying
fbshipit-source-id: 61a9715dcde5386eebfb43e93f847bba1ae0d3f2
Summary:
This PR allows RocksDB to run in single-primary, multi-secondary process mode.
The writer is a regular RocksDB (e.g. an `DBImpl`) instance playing the role of a primary.
Multiple `DBImplSecondary` processes (secondaries) share the same set of SST files, MANIFEST, WAL files with the primary. Secondaries tail the MANIFEST of the primary and apply updates to their own in-memory state of the file system, e.g. `VersionStorageInfo`.
This PR has several components:
1. (Originally in #4745). Add a `PathNotFound` subcode to `IOError` to denote the failure when a secondary tries to open a file which has been deleted by the primary.
2. (Similar to #4602). Add `FragmentBufferedReader` to handle partially-read, trailing record at the end of a log from where future read can continue.
3. (Originally in #4710 and #4820). Add implementation of the secondary, i.e. `DBImplSecondary`.
3.1 Tail the primary's MANIFEST during recovery.
3.2 Tail the primary's MANIFEST during normal processing by calling `ReadAndApply`.
3.3 Tailing WAL will be in a future PR.
4. Add an example in 'examples/multi_processes_example.cc' to demonstrate the usage of secondary RocksDB instance in a multi-process setting. Instructions to run the example can be found at the beginning of the source code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4899
Differential Revision: D14510945
Pulled By: riversand963
fbshipit-source-id: 4ac1c5693e6012ad23f7b4b42d3c374fecbe8886
Summary:
This is a feature to sample data-block compressibility and and report them as stats. 1 in N (tunable) blocks is sampled for compressibility using two algorithms:
1. lz4 or snappy for fast compression
2. zstd or zlib for slow but higher compression.
The stats are reported to the caller as raw-bytes and compressed-bytes. The block continues to be compressed for storage using the specified CompressionType.
The db_bench_tool how has a command line option for specifying the sampling rate. It's default value is 0 (no sampling). To test the overhead for a certain value, users can compare the performance of db_bench_tool, varying the sampling rate. It is unlikely to have a noticeable impact for high values like 20.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4842
Differential Revision: D13629011
Pulled By: shobhitdayal
fbshipit-source-id: 14ca668bcab6499b2a1734edf848eb62a4f4fafa
Summary:
RangeDelAggregatorV2 now supports ShouldDelete calls on
snapshot stripes and creation of range tombstone compaction iterators.
RangeDelAggregator is no longer used on any non-test code path, and will
be removed in a future commit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4758
Differential Revision: D13439254
Pulled By: abhimadan
fbshipit-source-id: fe105bcf8e3d4a2df37a622d5510843cd71b0401
Summary:
there is chance that
* the caller tries to repair the db when holding the db_lock, in
that case the env implementation might not set the `lock`
parameter of Repairer::Run().
* the caller somehow never calls Repairer::Run().
either way, the desctructor of Repair will compare the uninitialized
db_lock_ with nullptr, and tries to unlock it. there is good chance
that the db_lock_ is not nullptr, then boom.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4683
Differential Revision: D13260287
Pulled By: riversand963
fbshipit-source-id: 878a119d2e9f10a0fa17ee62cf3fb24b33d49fa5
Summary:
Removed `one_time_use` flag, which removed the need for some
tests, and changed all `NewRangeTombstoneIterator` methods to return
`FragmentedRangeTombstoneIterators`.
These changes also led to removing `RangeDelAggregatorV2::AddUnfragmentedTombstones`
and one of the `MemTableListVersion::AddRangeTombstoneIterators` methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4692
Differential Revision: D13106570
Pulled By: abhimadan
fbshipit-source-id: cbab5432d7fc2d9cdfd8d9d40361a1bffaa8f845
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
Current `log::Reader` does not perform retry after encountering `EOF`. In the future, we need the log reader to be able to retry tailing the log even after `EOF`.
Current implementation is simple. It does not provide more advanced retry policies. Will address this in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4394
Differential Revision: D9926508
Pulled By: riversand963
fbshipit-source-id: d86d145792a41bd64a72f642a2a08c7b7b5201e1
Summary:
This commit adds code to acquire lock on the DB LOCK file
before starting the repair process. This will prevent
multiple processes from performing repair on the same DB
simultaneously. Fixes repair_test to work with this change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4435
Differential Revision: D10361499
Pulled By: riversand963
fbshipit-source-id: 3c512c48b7193d383b2279ccecabdb660ac1cf22
Summary:
The code is dead in RocksDB as `log::Reader::initial_offset_` is always zero. We should delete it so we don't have to maintain it like in #4359.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4362
Differential Revision: D9817829
Pulled By: ajkr
fbshipit-source-id: 474a2c679e5bd273b40608f3a5332931d9eefe6d
Summary:
Do not consider the range tombstone sentinel key as causing 2 adjacent
sstables in a level to overlap. When a range tombstone's end key is the
largest key in an sstable, the sstable's end key is so to a "sentinel"
value that is the smallest key in the next sstable with a sequence
number of kMaxSequenceNumber. This "sentinel" is guaranteed to not
overlap in internal-key space with the next sstable. Unfortunately,
GetOverlappingFiles uses user-keys to determine overlap and was thus
considering 2 adjacent sstables in a level to overlap if they were
separated by this sentinel key. This in turn would cause compactions to
be larger than necessary.
Note that this conflicts with
https://github.com/facebook/rocksdb/pull/2769 and cases
`DBRangeDelTest.CompactionTreatsSplitInputLevelDeletionAtomically` to
fail.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4050
Differential Revision: D8844423
Pulled By: ajkr
fbshipit-source-id: df3f9f1db8f4cff2bff77376b98b83c2ae1d155b
Summary:
We potentially need this information for tracing, profiling and diagnosis.
Closes https://github.com/facebook/rocksdb/pull/4026
Differential Revision: D8555214
Pulled By: riversand963
fbshipit-source-id: 4263e06c00b6d5410b46aa46eb4e358ff2161dd2
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
In this change, an option to set different paths for different column families is added.
This option is set via cf_paths setting of ColumnFamilyOptions. This option will work in a similar fashion to db_paths setting. Cf_paths is a vector of Dbpath values which contains a pair of the absolute path and target size. Multiple levels in a Column family can go to different paths if cf_paths has more than one path.
To maintain backward compatibility, if cf_paths is not specified for a column family, db_paths setting will be used. Note that, if db_paths setting is also not specified, RocksDB already has code to use db_name as the only path.
Changes :
1) A new member "cf_paths" is added to ImmutableCfOptions. This is set, based on cf_paths setting of ColumnFamilyOptions and db_paths setting of ImmutableDbOptions. This member is used to identify the path information whenever files are accessed.
2) Validation checks are added for cf_paths setting based on existing checks for db_paths setting.
3) DestroyDB, PurgeObsoleteFiles etc. are edited to support multiple cf_paths.
4) Unit tests are added appropriately.
Closes https://github.com/facebook/rocksdb/pull/3102
Differential Revision: D6951697
Pulled By: ajkr
fbshipit-source-id: 60d2262862b0a8fd6605b09ccb0da32bb331787d
Summary:
Add PreReleaseCallback to be called at the end of WriteImpl but before publishing the sequence number. The callback is used in WritePrepareTxn to i) update the commit map, ii) update the last published sequence number in the 2nd write queue. It also ensures that all the commits will go to the 2nd queue.
These changes will ensure that the commit map is updated before the sequence number is published and used by reading snapshots. If we use two write queues, the snapshots will use the seq number published by the 2nd queue. If we use one write queue (the default, the snapshots will use the last seq number in the memtable, which also indicates the last published seq number.
Closes https://github.com/facebook/rocksdb/pull/3205
Differential Revision: D6438959
Pulled By: maysamyabandeh
fbshipit-source-id: f8b6c434e94bc5f5ab9cb696879d4c23e2577ab9
Summary:
Add a simple policy for NVMe write time life hint
Closes https://github.com/facebook/rocksdb/pull/3095
Differential Revision: D6298030
Pulled By: shligit
fbshipit-source-id: 9a72a42e32e92193af11599eb71f0cf77448e24d
Summary:
The file numbers assigned post-repair were sometimes smaller than older files' numbers due to `LogAndApply` saving the wrong next file number in the manifest.
- Mark the highest file seen during repair as used before `LogAndApply` so the correct next file number will be stored.
- Renamed `MarkFileNumberUsedDuringRecovery` to `MarkFileNumberUsed` since now it's used during repair in addition to during recovery
- Added `TEST_Current_Next_FileNo` to expose the next file number for the unit test.
Closes https://github.com/facebook/rocksdb/pull/2988
Differential Revision: D6018083
Pulled By: ajkr
fbshipit-source-id: 3f25cbf74439cb8f16dd12af90b67f9f9f75e718
Summary:
Update Compaction/Flush to support WritePreparedTxnDB: Add SnapshotChecker which is a proxy to query WritePreparedTxnDB::IsInSnapshot. Pass SnapshotChecker to DBImpl on WritePreparedTxnDB open. CompactionIterator use it to check if a key has been committed and if it is visible to a snapshot. In CompactionIterator:
* check if key has been committed. If not, output uncommitted keys AS-IS.
* use SnapshotChecker to check if key is visible to a snapshot when in need.
* do not output key with seq = 0 if the key is not committed.
Closes https://github.com/facebook/rocksdb/pull/2926
Differential Revision: D5902907
Pulled By: yiwu-arbug
fbshipit-source-id: 945e037fdf0aa652dc5ba0ad879461040baa0320
Summary:
SUMMARY
Moves the bytes_per_sync and wal_bytes_per_sync options from immutableoptions to mutable options. Also if wal_bytes_per_sync is changed, the wal file and memtables are flushed.
TEST PLAN
ran make check
all passed
Two new tests SetBytesPerSync, SetWalBytesPerSync check that after issuing setoptions with a new value for the var, the db options have the new value.
Closes https://github.com/facebook/rocksdb/pull/2893
Reviewed By: yiwu-arbug
Differential Revision: D5845814
Pulled By: TheRushingWookie
fbshipit-source-id: 93b52d779ce623691b546679dcd984a06d2ad1bd
Summary:
Problem:
- `DB::SanitizeOptions` strips trailing slash from `wal_dir` but not `dbname`
- We check whether `wal_dir` and `dbname` refer to the same directory using string equality: https://github.com/facebook/rocksdb/blob/master/db/repair.cc#L258
- Providing `dbname` with trailing slash causes default `wal_dir` to be misidentified as a separate directory.
- Then the repair tries to add all SST files to the `VersionEdit` twice (once for `dbname` dir, once for `wal_dir`) and fails with coredump.
Solution:
- Add a new `Env` function, `AreFilesSame`, which uses device and inode number to check whether files are the same. It's currently only implemented in `PosixEnv`.
- Migrate repair to use `AreFilesSame` to check whether `dbname` and `wal_dir` are same. If unsupported, falls back to string comparison.
Closes https://github.com/facebook/rocksdb/pull/2827
Differential Revision: D5761349
Pulled By: ajkr
fbshipit-source-id: c839d548678b742af1166d60b09abd94e5476238
Summary:
We should search wal_dir in Repairer::FindFiles function, and avoid use
LogFileNmae(dbname, number) to get WAL file's name, which will get a wrong
WAL filename. as following:
```
[WARN] [/home/liuchang/Workspace/rocksdb/db/repair.cc:310] Log #3: ignoring conversion error: IO error: While opening a file for sequentially reading: /tmp/rocksdbtest-1000/repair_test/000003.log: No such file or directory
```
I have added a new test case to repair_test.cc, which try to repair db with all WAL options.
Signed-off-by: Chang Liu <liuchang0812@gmail.com>
Closes https://github.com/facebook/rocksdb/pull/2692
Differential Revision: D5575888
Pulled By: ajkr
fbshipit-source-id: 5b93e9f85cddc01663ccecd87631fa723ac466a3
Summary:
Valgrind had false positive complaints about the initialization pattern for `GetCurrentTime()`'s argument in #2480. We can instead have the client initialize the time variable before calling `GetCurrentTime()`, and have `GetCurrentTime()` promise to only overwrite it in success case.
Closes https://github.com/facebook/rocksdb/pull/2526
Differential Revision: D5358689
Pulled By: ajkr
fbshipit-source-id: 857b189f24c19196f6bb299216f3e23e7bc4be42
Levi Tamasi