813 Commits (27f3af596609f3b86af5080cc870c869e836e7f2)

Author	SHA1	Message	Date
Yanqin Jin	fbfcf5cbcd	Remove unused fields from FileMetaData (temporarily) (#10443) ... Summary: FileMetaData::[min|max]_timestamp are not currently being used or tracked by RocksDB, even when user-defined timestamp is enabled. Each of them is a std::string which can occupy 32 bytes. Remove them for now. They may be added back when we have a pressing need for them. When we do add them back, consider store them in a more compact way, e.g. one boolean flag and a byte array of size 16. Per file min/max timestamp bounds are available as table properties. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10443 Test Plan: make check Reviewed By: pdillinger Differential Revision: D38292275 Pulled By: riversand963 fbshipit-source-id: 841dc4e855ad8f8481c80cb020603de9607c9c94	2 years ago
Zichen Zhu	8860fc902a	Support subcmpct using reserved resources for round-robin priority (#10341) ... Summary: Earlier implementation of round-robin priority can only pick one file at a time and disallows parallel compactions within the same level. In this PR, round-robin compaction policy will expand towards more input files with respecting some additional constraints, which are summarized as follows: * Constraint 1: We can only pick consecutive files - Constraint 1a: When a file is being compacted (or some input files are being compacted after expanding), we cannot choose it and have to stop choosing more files - Constraint 1b: When we reach the last file (with the largest keys), we cannot choose more files (the next file will be the first one with small keys) * Constraint 2: We should ensure the total compaction bytes (including the overlapped files from the next level) is no more than `mutable_cf_options_.max_compaction_bytes` * Constraint 3: We try our best to pick as many files as possible so that the post-compaction level size can be just less than `MaxBytesForLevel(start_level_)` * Constraint 4: If trivial move is allowed, we reuse the logic of `TryNonL0TrivialMove()` instead of expanding files with Constraint 3 More details can be found in `LevelCompactionBuilder::SetupOtherFilesWithRoundRobinExpansion()`. The above optimization accelerates the process of moving the compaction cursor, in which the write-amp can be further reduced. While a large compaction may lead to high write stall, we break this large compaction into several subcompactions **regardless of** the `max_subcompactions` limit. The number of subcompactions for round-robin compaction priority is determined through the following steps: * Step 1: Initialized against `max_output_file_limit`, the number of input files in the start level, and also the range size limit `ranges.size()` * Step 2: Call `AcquireSubcompactionResources()`when max subcompactions is not sufficient, but we may or may not obtain desired resources, additional number of resources is stored in `extra_num_subcompaction_threads_reserved_`). Subcompaction limit is changed and update `num_planned_subcompactions` with `GetSubcompactionLimit()` * Step 3: Call `ShrinkSubcompactionResources()` to ensure extra resources can be released (extra resources may exist for round-robin compaction when the number of actual number of subcompactions is less than the number of planned subcompactions) More details can be found in `CompactionJob::AcquireSubcompactionResources()`,`CompactionJob::ShrinkSubcompactionResources()`, and `CompactionJob::ReleaseSubcompactionResources()`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10341 Test Plan: Add `CompactionPriMultipleFilesRoundRobin[1-3]` unit test in `compaction_picker_test.cc` and `RoundRobinSubcompactionsAgainstResources.SubcompactionsUsingResources/[0-4]`, `RoundRobinSubcompactionsAgainstPressureToken.PressureTokenTest/[0-1]` in `db_compaction_test.cc` Reviewed By: ajkr, hx235 Differential Revision: D37792644 Pulled By: littlepig2013 fbshipit-source-id: 7fecb7c4ffd97b34bbf6e3b760b2c35a772a0657	2 years ago
sdong	a9565ccb26	Try to trivial move more than one files (#10190) ... Summary: In leveled compaction, try to trivial move more than one files if possible, up to 4 files or max_compaction_bytes. This is to allow higher write throughput for some use cases where data is loaded in sequential order, where appying compaction results is the bottleneck. When pick up a file to compact and it doesn't have overlapping files in the next level, try to expand to the next file if there is still no overlapping. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10190 Test Plan: Add some unit tests. For performance, Try to run ./db_bench_multi_move --benchmarks=fillseq --compression_type=lz4 --write_buffer_size=5000000 --num=100000000 --value_size=1000 -level_compaction_dynamic_level_bytes Together with https://github.com/facebook/rocksdb/pull/10188 , stalling will be eliminated in this benchmark. Reviewed By: jay-zhuang Differential Revision: D37230647 fbshipit-source-id: 42b260f545c46abc5d90335ac2bbfcd09602b549	2 years ago
sdong	b397dcd390	Change The Way Level Target And Compaction Score Are Calculated (#10057) ... Summary: The current level targets for dynamical leveling has a problem: the target level size will dramatically change after a L0->L1 compaction. When there are many L0 bytes, lower level compactions are delayed, but they will be resumed after the L0->L1 compaction finishes, so the expected write amplification benefits might not be realized. The proposal here is to revert the level targetting size, but instead relying on adjusting score for each level to prioritize levels that need to compact most. Basic idea: (1) target level size isn't adjusted, but score is adjusted. The reasoning is that with parallel compactions, holding compactions from happening might not be desirable, but we would like the compactions are scheduled from the level we feel most needed. For example, if we have a extra-large L2, we would like all compactions are scheduled for L2->L3 compactions, rather than L4->L5. This gets complicated when a large L0->L1 compaction is going on. Should we compact L2->L3 or L4->L5. So the proposal for that is: (2) the score is calculated by actual level size / (target size + estimated upper bytes coming down). The reasoning is that if we have a large amount of pending L0/L1 bytes coming down, compacting L2->L3 might be more expensive, as when the L0 bytes are compacted down to L2, the actual L2->L3 fanout would change dramatically. On the other hand, when the amount of bytes coming down to L5, the impacts to L5->L6 fanout are much less. So when calculating target score, we can adjust it by adding estimated downward bytes to the target level size. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10057 Test Plan: Repurpose tests VersionStorageInfoTest.MaxBytesForLevelDynamicWithLargeL0_* tests to cover this scenario. Reviewed By: ajkr Differential Revision: D37539742 fbshipit-source-id: 9c154cbfe92023f918cf5d80875d8776ad4831a4	2 years ago
Gang Liao	056e08d6c4	Enable blob caching for MultiGetBlob in RocksDB (#10272) ... Summary: - [x] Enabled blob caching for MultiGetBlob in RocksDB - [x] Refactored MultiGetBlob logic and interface in RocksDB - [x] Cleaned up Version::MultiGetBlob() and moved 'blob'-related code snippets into BlobSource - [x] Add End-to-end test cases in db_blob_basic_test and also add unit tests in blob_source_test This task is a part of https://github.com/facebook/rocksdb/issues/10156 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10272 Reviewed By: ltamasi Differential Revision: D37558112 Pulled By: gangliao fbshipit-source-id: a73a6a94ffdee0024d5b2a39e6d1c1a7d38664db	2 years ago
Levi Tamasi	c73d2a9d18	Add API for writing wide-column entities (#10242) ... Summary: The patch builds on https://github.com/facebook/rocksdb/pull/9915 and adds a new API called `PutEntity` that can be used to write a wide-column entity to the database. The new API is added to both `DB` and `WriteBatch`. Note that currently there is no way to retrieve these entities; more precisely, all read APIs (`Get`, `MultiGet`, and iterator) return `NotSupported` when they encounter a wide-column entity that is required to answer a query. Read-side support (as well as other missing functionality like `Merge`, compaction filter, and timestamp support) will be added in later PRs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10242 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D37369748 Pulled By: ltamasi fbshipit-source-id: 7f5e412359ed7a400fd80b897dae5599dbcd685d	2 years ago
sdong	246d469750	Reduce overhead of SortFileByOverlappingRatio() (#10161) ... Summary: Currently SortFileByOverlappingRatio() is O(nlogn). It is usually OK but When there are a lot of files in an LSM-tree, SortFileByOverlappingRatio() can take non-trivial amount of time. The problem is severe when the user is loading keys in sorted order, where compaction is only trivial move and this operation becomes the bottleneck and limit the total throughput. This commit makes SortFileByOverlappingRatio() only find the top 50 files based on score. 50 files are usually enough for the parallel compactions needed for the level, and in case it is not enough, we would fall back to random, which should be acceptable. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10161 Test Plan: Run a fillseq that generates a lot of files, and observe throughput improved (although stall is not yet eliminated). The command ran: TEST_TMPDIR=/dev/shm/ ./db_bench_sort --benchmarks=fillseq --compression_type=lz4 --write_buffer_size=5000000 --num=100000000 --value_size=1000 The throughput improved by 11%. Reviewed By: jay-zhuang Differential Revision: D37129469 fbshipit-source-id: 492da2ef5bfc7cdd6daa3986b50d2ff91f88542d	2 years ago
zczhu	30141461f9	Add basic kRoundRobin compaction policy (#10107) ... Summary: Add `kRoundRobin` as a compaction priority. The implementation is as follows. - Define a cursor as the smallest Internal key in the successor of the selected file. Add `vector<InternalKey> compact_cursor_` into `VersionStorageInfo` where each element (`InternalKey`) in `compact_cursor_` represents a cursor. In round-robin compaction policy, we just need to select the first file (assuming files are sorted) and also has the smallest InternalKey larger than/equal to the cursor. After a file is chosen, we create a new `Fsize` vector which puts the selected file is placed at the first position in `temp`, the next cursor is then updated as the smallest InternalKey in successor of the selected file (the above logic is implemented in `SortFileByRoundRobin`). - After a compaction succeeds, typically `InstallCompactionResults()`, we choose the next cursor for the input level and save it to `edit`. When calling `LogAndApply`, we save the next cursor with its level into some local variable and finally apply the change to `vstorage` in `SaveTo` function. - Cursors are persist pair by pair (<level, InternalKey>) in `EncodeTo` so that they can be reconstructed when reopening. An empty cursor will not be encoded to MANIFEST Pull Request resolved: https://github.com/facebook/rocksdb/pull/10107 Test Plan: add unit test (`CompactionPriRoundRobin`) in `compaction_picker_test`, add `kRoundRobin` priority in `CompactionPriTest` from `db_compaction_test`, and add `PersistRoundRobinCompactCursor` in `db_compaction_test` Reviewed By: ajkr Differential Revision: D37316037 Pulled By: littlepig2013 fbshipit-source-id: 9f481748190ace416079139044e00df2968fb1ee	2 years ago
Gang Liao	deff48bcef	Add blob source to retrieve blobs in RocksDB (#10198) ... Summary: There is currently no caching mechanism for blobs, which is not ideal especially when the database resides on remote storage (where we cannot rely on the OS page cache). As part of this task, we would like to make it possible for the application to configure a blob cache. In this task, we formally introduced the blob source to RocksDB. BlobSource is a new abstraction layer that provides universal access to blobs, regardless of whether they are in the blob cache, secondary cache, or (remote) storage. Depending on user settings, it always fetch blobs from multi-tier cache and storage with minimal cost. Note: The new `MultiGetBlob()` implementation is not included in the current PR. To go faster, we aim to create a separate PR for it in parallel! This PR is a part of https://github.com/facebook/rocksdb/issues/10156 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10198 Reviewed By: ltamasi Differential Revision: D37294735 Pulled By: gangliao fbshipit-source-id: 9cb50422d9dd1bc03798501c2778b6c7520c7a1e	2 years ago
anand76	a6691d0f65	Update stats to help users estimate MultiGet async IO impact (#10182) ... Summary: Add a couple of stats to help users estimate the impact of potential MultiGet perf improvements - 1. NUM_LEVEL_READ_PER_MULTIGET - A histogram stat for number of levels that required MultiGet to read from a file 2. MULTIGET_COROUTINE_COUNT - A ticker stat to count the number of times the coroutine version of MultiGetFromSST was used The NUM_DATA_BLOCKS_READ_PER_LEVEL stat is obsoleted as it doesn't provide useful information for MultiGet optimization. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10182 Reviewed By: akankshamahajan15 Differential Revision: D37213296 Pulled By: anand1976 fbshipit-source-id: 5d2b7708017c0e278578ae4bffac3926f6530efb	2 years ago
Hui Xiao	d665afdbf3	Account memory of FileMetaData in global memory limit (#9924) ... Summary: **Context/Summary:** As revealed by heap profiling, allocation of `FileMetaData` for [newly created file added to a Version](https://github.com/facebook/rocksdb/pull/9924/files#diff-a6aa385940793f95a2c5b39cc670bd440c4547fa54fd44622f756382d5e47e43R774) can consume significant heap memory. This PR is to account that toward our global memory limit based on block cache capacity. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9924 Test Plan: - Previous `make check` verified there are only 2 places where the memory of the allocated `FileMetaData` can be released - New unit test `TEST_P(ChargeFileMetadataTestWithParam, Basic)` - db bench (CPU cost of `charge_file_metadata` in write and compact) - **write micros/op: -0.24%** : `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_file_metadata=1 (remove this option for pre-PR) -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` - **compact micros/op -0.87%** : `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_file_metadata=1 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 -numdistinct=1000 && ./db_bench -benchmarks=compact -db=$TEST_TMPDIR -use_existing_db=1 -charge_file_metadata=1 -disable_auto_compactions=1 | egrep 'compact'` table 1 - write #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | -0.3633711465 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | 0.5289363078 80 | 3.87828 | 0.119007 | 3.86791 | 0.115674 | **-0.2673865734** 160 | 3.87677 | 0.162231 | 3.86739 | 0.16663 | **-0.2419539978** table 2 - compact #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 2,399,650.00 | 96,375.80 | 2,359,537.00 | 53,243.60 | -1.67 20 | 2,410,480.00 | 89,988.00 | 2,433,580.00 | 91,121.20 | 0.96 40 | 2.41E+06 | 121811 | 2.39E+06 | 131525 | **-0.96** 80 | 2.40E+06 | 134503 | 2.39E+06 | 108799 | **-0.78** - stress test: `python3 tools/db_crashtest.py blackbox --charge_file_metadata=1 --cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36055583 Pulled By: hx235 fbshipit-source-id: b60eab94707103cb1322cf815f05810ef0232625	2 years ago
sdong	356f8c5d81	FindObsoleteFiles() to directly check whether candidate files are live (#10040) ... Summary: Right now, in FindObsoleteFiles() we build a list of all live SST files from all existing Versions. This is all done in DB mutex, and is O(m*n) where m is number of versions and n is number of files. In some extereme cases, it can take very long. The list is used to see whether a candidate file still shows up in a version. With this commit, every candidate file is directly check against all the versions for file existance. This operation would be O(m*k) where k is number of candidate files. Since is usually small (except perhaps full compaction in universal compaction), this is usually much faster than the previous solution. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10040 Test Plan: TBD Reviewed By: riversand963 Differential Revision: D36613391 fbshipit-source-id: 3f13b090f755d9b3ae417faec62cd6e798bac1eb	2 years ago
Akanksha Mahajan	2db6a4a1d6	Seek parallelization (#9994) ... Summary: The RocksDB iterator is a hierarchy of iterators. MergingIterator maintains a heap of LevelIterators, one for each L0 file and for each non-zero level. The Seek() operation naturally lends itself to parallelization, as it involves positioning every LevelIterator on the correct data block in the correct SST file. It lookups a level for a target key, to find the first key that's >= the target key. This typically involves reading one data block that is likely to contain the target key, and scan forward to find the first valid key. The forward scan may read more data blocks. In order to find the right data block, the iterator may read some metadata blocks (required for opening a file and searching the index). This flow can be parallelized. Design: Seek will be called two times under async_io option. First seek will send asynchronous request to prefetch the data blocks at each level and second seek will follow the normal flow and in FilePrefetchBuffer::TryReadFromCacheAsync it will wait for the Poll() to get the results and add the iterator to min_heap. - Status::TryAgain is passed down from FilePrefetchBuffer::PrefetchAsync to block_iter_.Status indicating asynchronous request has been submitted. - If for some reason asynchronous request returns error in submitting the request, it will fallback to sequential reading of blocks in one pass. - If the data already exists in prefetch_buffer, it will return the data without prefetching further and it will be treated as single pass of seek. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9994 Test Plan: - **Run Regressions.** ``` ./db_bench -db=/tmp/prefix_scan_prefetch_main -benchmarks="fillseq" -key_size=32 -value_size=512 -num=5000000 -use_direct_io_for_flush_and_compaction=true -target_file_size_base=16777216 ``` i) Previous release 7.0 run for normal prefetching with async_io disabled: ``` ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 7.0 Date: Thu Mar 17 13:11:34 2022 CPU: 24 * Intel Core Processor (Broadwell) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 5000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 2594.0 MB (estimated) FileSize: 1373.3 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_main] seekrandom : 483618.390 micros/op 2 ops/sec; 338.9 MB/s (249 of 249 found) ``` ii) normal prefetching after changes with async_io disable: ``` ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 Set seed to 1652922591315307 because --seed was 0 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 7.3 Date: Wed May 18 18:09:51 2022 CPU: 32 * Intel Xeon Processor (Skylake) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 5000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 2594.0 MB (estimated) FileSize: 1373.3 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_main] seekrandom : 483080.466 micros/op 2 ops/sec 120.287 seconds 249 operations; 340.8 MB/s (249 of 249 found) ``` iii) db_bench with async_io enabled completed succesfully ``` ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 -async_io=1 -adaptive_readahead=1 Set seed to 1652924062021732 because --seed was 0 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 7.3 Date: Wed May 18 18:34:22 2022 CPU: 32 * Intel Xeon Processor (Skylake) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 5000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 2594.0 MB (estimated) FileSize: 1373.3 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_main] seekrandom : 553913.576 micros/op 1 ops/sec 120.199 seconds 217 operations; 293.6 MB/s (217 of 217 found) ``` - db_stress with async_io disabled completed succesfully ``` export CRASH_TEST_EXT_ARGS=" --async_io=0" make crash_test -j ``` I**n Progress**: db_stress with async_io is failing and working on debugging/fixing it. Reviewed By: anand1976 Differential Revision: D36459323 Pulled By: akankshamahajan15 fbshipit-source-id: abb1cd944abe712bae3986ae5b16704b3338917c	2 years ago
anand76	e015206dd6	Fix crash due to MultiGet async IO and direct IO (#10024) ... Summary: MultiGet with async IO is not officially supported with Posix yet. Avoid a crash by using synchronous MultiRead when direct IO is enabled. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10024 Test Plan: Run db_crashtest.py manually Reviewed By: akankshamahajan15 Differential Revision: D36551053 Pulled By: anand1976 fbshipit-source-id: 72190418fa92dd0397e87825df618b12c9bdecda	2 years ago
anand76	57997ddaaf	Multi file concurrency in MultiGet using coroutines and async IO (#9968) ... Summary: This PR implements a coroutine version of batched MultiGet in order to concurrently read from multiple SST files in a level using async IO, thus reducing the latency of the MultiGet. The API from the user perspective is still synchronous and single threaded, with the RocksDB part of the processing happening in the context of the caller's thread. In Version::MultiGet, the decision is made whether to call synchronous or coroutine code. A good way to review this PR is to review the first 4 commits in order - de773b3, 70c2f70, 10b50e1, and 377a597 - before reviewing the rest. TODO: 1. Figure out how to build it in CircleCI (requires some dependencies to be installed) 2. Do some stress testing with coroutines enabled No regression in synchronous MultiGet between this branch and main - ``` ./db_bench -use_existing_db=true --db=/data/mysql/rocksdb/prefix_scan -benchmarks="readseq,multireadrandom" -key_size=32 -value_size=512 -num=5000000 -batch_size=64 -multiread_batched=true -use_direct_reads=false -duration=60 -ops_between_duration_checks=1 -readonly=true -adaptive_readahead=true -threads=16 -cache_size=10485760000 -async_io=false -multiread_stride=40000 -statistics ``` Branch - ```multireadrandom : 4.025 micros/op 3975111 ops/sec 60.001 seconds 238509056 operations; 2062.3 MB/s (14767808 of 14767808 found)``` Main - ```multireadrandom : 3.987 micros/op 4013216 ops/sec 60.001 seconds 240795392 operations; 2082.1 MB/s (15231040 of 15231040 found)``` More benchmarks in various scenarios are given below. The measurements were taken with ```async_io=false``` (no coroutines) and ```async_io=true``` (use coroutines). For an IO bound workload (with every key requiring an IO), the coroutines version shows a clear benefit, being ~2.6X faster. For CPU bound workloads, the coroutines version has ~6-15% higher CPU utilization, depending on how many keys overlap an SST file. 1. Single thread IO bound workload on remote storage with sparse MultiGet batch keys (~1 key overlap/file) - No coroutines - ```multireadrandom : 831.774 micros/op 1202 ops/sec 60.001 seconds 72136 operations; 0.6 MB/s (72136 of 72136 found)``` Using coroutines - ```multireadrandom : 318.742 micros/op 3137 ops/sec 60.003 seconds 188248 operations; 1.6 MB/s (188248 of 188248 found)``` 2. Single thread CPU bound workload (all data cached) with ~1 key overlap/file - No coroutines - ```multireadrandom : 4.127 micros/op 242322 ops/sec 60.000 seconds 14539384 operations; 125.7 MB/s (14539384 of 14539384 found)``` Using coroutines - ```multireadrandom : 4.741 micros/op 210935 ops/sec 60.000 seconds 12656176 operations; 109.4 MB/s (12656176 of 12656176 found)``` 3. Single thread CPU bound workload with ~2 key overlap/file - No coroutines - ```multireadrandom : 3.717 micros/op 269000 ops/sec 60.000 seconds 16140024 operations; 139.6 MB/s (16140024 of 16140024 found)``` Using coroutines - ```multireadrandom : 4.146 micros/op 241204 ops/sec 60.000 seconds 14472296 operations; 125.1 MB/s (14472296 of 14472296 found)``` 4. CPU bound multi-threaded (16 threads) with ~4 key overlap/file - No coroutines - ```multireadrandom : 4.534 micros/op 3528792 ops/sec 60.000 seconds 211728728 operations; 1830.7 MB/s (12737024 of 12737024 found) ``` Using coroutines - ```multireadrandom : 4.872 micros/op 3283812 ops/sec 60.000 seconds 197030096 operations; 1703.6 MB/s (12548032 of 12548032 found) ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9968 Reviewed By: akankshamahajan15 Differential Revision: D36348563 Pulled By: anand1976 fbshipit-source-id: c0ce85a505fd26ebfbb09786cbd7f25202038696	2 years ago
Jay Zhuang	c6d326d3d7	Track SST unique id in MANIFEST and verify (#9990) ... Summary: Start tracking SST unique id in MANIFEST, which is used to verify with SST properties to make sure the SST file is not overwritten or misplaced. A DB option `try_verify_sst_unique_id` is introduced to enable/disable the verification, if enabled, it opens all SST files during DB-open to read the unique_id from table properties (default is false), so it's recommended to use it with `max_open_files = -1` to pre-open the files. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9990 Test Plan: unittests, format-compatible test, mini-crash Reviewed By: anand1976 Differential Revision: D36381863 Pulled By: jay-zhuang fbshipit-source-id: 89ea2eb6b35ed3e80ead9c724eb096083eaba63f	3 years ago
sdong	736a7b5433	Remove own ToString() (#9955) ... Summary: ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString(). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955 Test Plan: Watch CI tests Reviewed By: riversand963 Differential Revision: D36176799 fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471	3 years ago
sdong	49628c9a83	Use std::numeric_limits<> (#9954) ... Summary: Right now we still don't fully use std::numeric_limits but use a macro, mainly for supporting VS 2013. Right now we only support VS 2017 and up so it is not a problem. The code comment claims that MinGW still needs it. We don't have a CI running MinGW so it's hard to validate. since we now require C++17, it's hard to imagine MinGW would still build RocksDB but doesn't support std::numeric_limits<>. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9954 Test Plan: See CI Runs. Reviewed By: riversand963 Differential Revision: D36173954 fbshipit-source-id: a35a73af17cdcae20e258cdef57fcf29a50b49e0	3 years ago
Levi Tamasi	db536ee045	Propagate errors from UpdateBoundaries (#9851) ... Summary: In `FileMetaData`, we keep track of the lowest-numbered blob file referenced by the SST file in question for the purposes of BlobDB's garbage collection in the `oldest_blob_file_number` field, which is updated in `UpdateBoundaries`. However, with the current code, `BlobIndex` decoding errors (or invalid blob file numbers) are swallowed in this method. The patch changes this by propagating these errors and failing the corresponding flush/compaction. (Note that since blob references are generated by the BlobDB code and also parsed by `CompactionIterator`, in reality this can only happen in the case of memory corruption.) This change necessitated updating some unit tests that involved fake/corrupt `BlobIndex` objects. Some of these just used a dummy string like `"blob_index"` as a placeholder; these were replaced with real `BlobIndex`es. Some were relying on the earlier behavior to simulate corruption; these were replaced with `SyncPoint`-based test code that corrupts a valid blob reference at read time. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9851 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D35683671 Pulled By: ltamasi fbshipit-source-id: f7387af9945c48e4d5c4cd864f1ba425c7ad51f6	3 years ago
sdong	e03f8a0c12	L0 Subcompaction to trim input files (#9802) ... Summary: When sub compaction is decided for L0->L1 compaction, most of the cases, all L0 files will be involved in all sub compactions. However, it is not always the case. When files are generally (but not strictly) inserted in sequential order, there can be a subset of L0 files invovled. Yet RocksDB always open all those L0 files, and build an iterator, read many of the files' first of last block with expensive readahead. We trim some input files to reduce overhead a little bit. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9802 Test Plan: Add a unit test to cover this case and manually validate the behavior while running the test. Reviewed By: ajkr Differential Revision: D35371031 fbshipit-source-id: 701ed7375b5cbe41672e93b38fe8a1503dad08b6	3 years ago
Peter Dillinger	40e3f30a28	Fix FileStorageInfo fields from GetLiveFilesMetaData (#9769) ... Summary: In making `SstFileMetaData` inherit from `FileStorageInfo`, I overlooked setting some `FileStorageInfo` fields when then default `SstFileMetaData()` ctor is used. This affected `GetLiveFilesMetaData()`. Also removed some buggy `static_cast<size_t>` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9769 Test Plan: Updated tests Reviewed By: jay-zhuang Differential Revision: D35220383 Pulled By: pdillinger fbshipit-source-id: 05b4ee468258dbd3699517e1124838bf405fe7f8	3 years ago
Yanqin Jin	e0c84aa0dc	Fix a race condition in WAL tracking causing DB open failure (#9715) ... Summary: There is a race condition if WAL tracking in the MANIFEST is enabled in a database that disables 2PC. The race condition is between two background flush threads trying to install flush results to the MANIFEST. Consider an example database with two column families: "default" (cfd0) and "cf1" (cfd1). Initially, both column families have one mutable (active) memtable whose data backed by 6.log. 1. Trigger a manual flush for "cf1", creating a 7.log 2. Insert another key to "default", and trigger flush for "default", creating 8.log 3. BgFlushThread1 finishes writing 9.sst 4. BgFlushThread2 finishes writing 10.sst ``` Time BgFlushThread1 BgFlushThread2 | mutex_.Lock() | precompute min_wal_to_keep as 6 | mutex_.Unlock() | mutex_.Lock() | precompute min_wal_to_keep as 6 | join MANIFEST write queue and mutex_.Unlock() | write to MANIFEST | mutex_.Lock() | cfd1->log_number = 7 | Signal bg_flush_2 and mutex_.Unlock() | wake up and mutex_.Lock() | cfd0->log_number = 8 | FindObsoleteFiles() with job_context->log_number == 7 | mutex_.Unlock() | PurgeObsoleteFiles() deletes 6.log V ``` As shown in the above, BgFlushThread2 thinks that the min wal to keep is 6.log because "cf1" has unflushed data in 6.log (cf1.log_number=6). Similarly, BgThread1 thinks that min wal to keep is also 6.log because "default" has unflushed data (default.log_number=6). No WAL deletion will be written to MANIFEST because 6 is equal to `versions_->wals_.min_wal_number_to_keep`, due to https://github.com/facebook/rocksdb/blob/7.1.fb/db/memtable_list.cc#L513:L514. The bg flush thread that finishes last will perform file purging. `job_context.log_number` will be evaluated as 7, i.e. the min wal that contains unflushed data, causing 6.log to be deleted. However, MANIFEST thinks 6.log should still exist. If you close the db at this point, you won't be able to re-open it if `track_and_verify_wal_in_manifest` is true. We must handle the case of multiple bg flush threads, and it is difficult for one bg flush thread to know the correct min wal number until the other bg flush threads have finished committing to the manifest and updated the `cfd::log_number`. To fix this issue, we rename an existing variable `min_log_number_to_keep_2pc` to `min_log_number_to_keep`, and use it to track WAL file deletion in non-2pc mode as well. This variable is updated only 1) during recovery with mutex held, or 2) in the MANIFEST write thread. `min_log_number_to_keep` means RocksDB will delete WALs below it, although there may be WALs above it which are also obsolete. Formally, we will have [min_wal_to_keep, max_obsolete_wal]. During recovery, we make sure that only WALs above max_obsolete_wal are checked and added back to `alive_log_files_`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9715 Test Plan: ``` make check ``` Also ran stress test below (with asan) to make sure it completes successfully. ``` TEST_TMPDIR=/dev/shm/rocksdb OPT=-g ASAN_OPTIONS=disable_coredump=0 \ CRASH_TEST_EXT_ARGS=--compression_type=zstd SKIP_FORMAT_BUCK_CHECKS=1 \ make J=52 -j52 blackbox_asan_crash_test ``` Reviewed By: ltamasi Differential Revision: D34984412 Pulled By: riversand963 fbshipit-source-id: c7b21a8d84751bb55ea79c9f387103d21b231005	3 years ago
Yanqin Jin	3bd150c442	Print information about all column families when using ldb (#9719) ... Summary: Before this PR, the following command prints only the default column family's information in the end: ``` ldb --db=. --hex manifest_dump --verbose ``` We should print all column families instead. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9719 Test Plan: `make check` makes sure nothing breaks. Generate a DB, use the above command to verify all column families are printed. Reviewed By: akankshamahajan15 Differential Revision: D34992453 Pulled By: riversand963 fbshipit-source-id: de1d38c4539cd89f74e1a6240ad7a6e2416bf198	3 years ago
anand76	627deb7ceb	Fix some MultiGet batching stats (#9583) ... Summary: The NUM_INDEX_AND_FILTER_BLOCKS_READ_PER_LEVEL, NUM_DATA_BLOCKS_READ_PER_LEVEL, and NUM_SST_READ_PER_LEVEL stats were being recorded only when the last file in a level happened to have hits. They are supposed to be updated for every level. Also, there was some overcounting of GetContextStats. This PR fixes both the problems. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9583 Test Plan: Update the unit test in db_basic_test Reviewed By: akankshamahajan15 Differential Revision: D34308044 Pulled By: anand1976 fbshipit-source-id: b3b36020fda26ba91bc6e0e47d52d58f4d7f656e	3 years ago
Hui Xiao	443d8ef094	Fix PinSelf() read-after-free in DB::GetMergeOperands() (#9507) ... Summary: **Context:** Running the new test `DBMergeOperandTest.MergeOperandReadAfterFreeBug` prior to this fix surfaces the read-after-free bug of PinSef() as below: ``` READ of size 8 at 0x60400002529d thread T0 https://github.com/facebook/rocksdb/issues/5 0x7f199a in rocksdb::PinnableSlice::PinSelf(rocksdb::Slice const&) include/rocksdb/slice.h:171 https://github.com/facebook/rocksdb/issues/6 0x7f199a in rocksdb::DBImpl::GetImpl(rocksdb::ReadOptions const&, rocksdb::Slice const&, rocksdb::DBImpl::GetImplOptions&) db/db_impl/db_impl.cc:1919 https://github.com/facebook/rocksdb/issues/7 0x540d63 in rocksdb::DBImpl::GetMergeOperands(rocksdb::ReadOptions const&, rocksdb::ColumnFamilyHandle*, rocksdb::Slice const&, rocksdb::PinnableSlice*, rocksdb::GetMergeOperandsOptions*, int*) db/db_impl/db_impl.h:203 freed by thread T0 here: https://github.com/facebook/rocksdb/issues/3 0x1191399 in rocksdb::cache_entry_roles_detail::RegisteredDeleter<rocksdb::Block, (rocksdb::CacheEntryRole)0>::Delete(rocksdb::Slice const&, void*) cache/cache_entry_roles.h:99 https://github.com/facebook/rocksdb/issues/4 0x719348 in rocksdb::LRUHandle::Free() cache/lru_cache.h:205 https://github.com/facebook/rocksdb/issues/5 0x71047f in rocksdb::LRUCacheShard::Release(rocksdb::Cache::Handle*, bool) cache/lru_cache.cc:547 https://github.com/facebook/rocksdb/issues/6 0xa78f0a in rocksdb::Cleanable::DoCleanup() include/rocksdb/cleanable.h:60 https://github.com/facebook/rocksdb/issues/7 0xa78f0a in rocksdb::Cleanable::Reset() include/rocksdb/cleanable.h:38 https://github.com/facebook/rocksdb/issues/8 0xa78f0a in rocksdb::PinnedIteratorsManager::ReleasePinnedData() db/pinned_iterators_manager.h:71 https://github.com/facebook/rocksdb/issues/9 0xd0c21b in rocksdb::PinnedIteratorsManager::~PinnedIteratorsManager() db/pinned_iterators_manager.h:24 https://github.com/facebook/rocksdb/issues/10 0xd0c21b in rocksdb::Version::Get(rocksdb::ReadOptions const&, rocksdb::LookupKey const&, rocksdb::PinnableSlice*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >*, rocksdb::Status*, rocksdb::MergeContext*, unsigned long*, bool*, bool*, unsigned long*, rocksdb::ReadCallback*, bool*, bool) db/pinned_iterators_manager.h:22 https://github.com/facebook/rocksdb/issues/11 0x7f0fdf in rocksdb::DBImpl::GetImpl(rocksdb::ReadOptions const&, rocksdb::Slice const&, rocksdb::DBImpl::GetImplOptions&) db/db_impl/db_impl.cc:1886 https://github.com/facebook/rocksdb/issues/12 0x540d63 in rocksdb::DBImpl::GetMergeOperands(rocksdb::ReadOptions const&, rocksdb::ColumnFamilyHandle*, rocksdb::Slice const&, rocksdb::PinnableSlice*, rocksdb::GetMergeOperandsOptions*, int*) db/db_impl/db_impl.h:203 previously allocated by thread T0 here: https://github.com/facebook/rocksdb/issues/1 0x1239896 in rocksdb::AllocateBlock(unsigned long, **rocksdb::MemoryAllocator*)** memory/memory_allocator.h:35 https://github.com/facebook/rocksdb/issues/2 0x1239896 in rocksdb::BlockFetcher::CopyBufferToHeapBuf() table/block_fetcher.cc:171 https://github.com/facebook/rocksdb/issues/3 0x1239896 in rocksdb::BlockFetcher::GetBlockContents() table/block_fetcher.cc:206 https://github.com/facebook/rocksdb/issues/4 0x122eae5 in rocksdb::BlockFetcher::ReadBlockContents() table/block_fetcher.cc:325 https://github.com/facebook/rocksdb/issues/5 0x11b1f45 in rocksdb::Status rocksdb::BlockBasedTable::MaybeReadBlockAndLoadToCache<rocksdb::Block>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, bool, rocksdb::CachableEntry<rocksdb::Block>*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::BlockContents*) const table/block_based/block_based_table_reader.cc:1503 ``` Here is the analysis: - We have [PinnedIteratorsManager](https://github.com/facebook/rocksdb/blob/6.28.fb/db/version_set.cc#L1980) with `Cleanable` capability in our `Version::Get()` path. It's responsible for managing the life-time of pinned iterator and invoking registered cleanup functions during its own destruction. - For example in case above, the merge operands's clean-up gets associated with this manger in [GetContext::push_operand](https://github.com/facebook/rocksdb/blob/6.28.fb/table/get_context.cc#L405). During PinnedIteratorsManager's [destruction](https://github.com/facebook/rocksdb/blob/6.28.fb/db/pinned_iterators_manager.h#L67), the release function associated with those merge operand data is invoked. **And that's what we see in "freed by thread T955 here" in ASAN.** - Bug 🐛: `PinnedIteratorsManager` is local to `Version::Get()` while the data of merge operands need to outlive `Version::Get` and stay till they get [PinSelf()](https://github.com/facebook/rocksdb/blob/6.28.fb/db/db_impl/db_impl.cc#L1905), **which is the read-after-free in ASAN.** - This bug is likely to be an overlook of `PinnedIteratorsManager` when developing the API `DB::GetMergeOperands` cuz the current logic works fine with the existing case of getting the *merged value* where the operands do not need to live that long. - This bug was not surfaced much (even in its unit test) due to the release function associated with the merge operands (which are actually blocks put in cache as you can see in `BlockBasedTable::MaybeReadBlockAndLoadToCache` **in "previously allocated by" in ASAN report**) is a cache entry deleter. The deleter will call `Cache::Release()` which, for LRU cache, won't immediately deallocate the block based on LRU policy [unless the cache is full or being instructed to force erase](https://github.com/facebook/rocksdb/blob/6.28.fb/cache/lru_cache.cc#L521-L531) - `DBMergeOperandTest.MergeOperandReadAfterFreeBug` makes the cache extremely small to force cache full. **Summary:** - Fix the bug by align `PinnedIteratorsManager`'s lifetime with the merge operands Pull Request resolved: https://github.com/facebook/rocksdb/pull/9507 Test Plan: - New test `DBMergeOperandTest.MergeOperandReadAfterFreeBug` - db bench on read path - Setup (LSM tree with several levels, cache the whole db to avoid read IO, warm cache with readseq to avoid read IO): `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks="fillrandom,readseq -num=1000000 -cache_size=100000000 -write_buffer_size=10000 -statistics=1 -max_bytes_for_level_base=10000 -level0_file_num_compaction_trigger=1``TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks="readrandom" -num=1000000 -cache_size=100000000 ` - Actual command run (run 20-run for 20 times and then average the 20-run's average micros/op) - `for j in {1..20}; do (for i in {1..20}; do rm -rf /dev/shm/rocksdb/ && TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks="fillrandom,readseq,readrandom" -num=1000000 -cache_size=100000000 -write_buffer_size=10000 -statistics=1 -max_bytes_for_level_base=10000 -level0_file_num_compaction_trigger=1 | egrep 'readrandom'; done > rr_output_pre.txt && (awk '{sum+=$3; sum_sqrt+=$3^2}END{print sum/20, sqrt(sum_sqrt/20-(sum/20)^2)}' rr_output_pre.txt) >> rr_output_pre_2.txt); done` - **Result: Pre-change: 3.79193 micros/op; Post-change: 3.79528 micros/op (+0.09%)** (pre-change)sorted avg micros/op of each 20-run | std of micros/op of each 20-run | (post-change) sorted avg micros/op of each 20-run | std of micros/op of each 20-run -- | -- | -- | -- 3.58355 | 0.265209 | 3.48715 | 0.382076 3.58845 | 0.519927 | 3.5832 | 0.382726 3.66415 | 0.452097 | 3.677 | 0.563831 3.68495 | 0.430897 | 3.68405 | 0.495355 3.70295 | 0.482893 | 3.68465 | 0.431438 3.719 | 0.463806 | 3.71945 | 0.457157 3.7393 | 0.453423 | 3.72795 | 0.538604 3.7806 | 0.527613 | 3.75075 | 0.444509 3.7817 | 0.426704 | 3.7683 | 0.468065 3.809 | 0.381033 | 3.8086 | 0.557378 3.80985 | 0.466011 | 3.81805 | 0.524833 3.8165 | 0.500351 | 3.83405 | 0.529339 3.8479 | 0.430326 | 3.86285 | 0.44831 3.85125 | 0.434108 | 3.8717 | 0.544098 3.8556 | 0.524602 | 3.895 | 0.411679 3.8656 | 0.476383 | 3.90965 | 0.566636 3.8911 | 0.488477 | 3.92735 | 0.608038 3.898 | 0.493978 | 3.9439 | 0.524511 3.97235 | 0.515008 | 3.9623 | 0.477416 3.9768 | 0.519993 | 3.98965 | 0.521481 - CI Reviewed By: ajkr Differential Revision: D34030519 Pulled By: hx235 fbshipit-source-id: a99ac585c11704c5ed93af033cb29ba0a7b16ae8	3 years ago
Levi Tamasi	a1203edca4	Rework VersionStorageInfo::ComputeFilesMarkedForForcedBlobGC a bit (#9548) ... Summary: We had a bug in `VersionStorageInfo::ComputeFilesMarkedForForcedBlobGC` related to the edge case where all blob files are part of the "oldest batch", i.e. where only the very oldest file has any linked SSTs. (See https://github.com/facebook/rocksdb/issues/9542) This PR tries to make the logic in this method clearer and also adds a unit test for the problematic case. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9548 Test Plan: `make check` Reviewed By: akankshamahajan15 Differential Revision: D34158959 Pulled By: ltamasi fbshipit-source-id: fbab6d749c569728382aa04f7b7c60c92cca7650	3 years ago
Levi Tamasi	b2423f8dde	Fix off-by-one bug in VersionStorageInfo::ComputeFilesMarkedForForcedBlobGC (#9542) ... Summary: Fixes a bug introduced in https://github.com/facebook/rocksdb/issues/9526 where we index one position past the end of a `vector`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9542 Test Plan: `make asan_check` Will add a unit test in a separate PR. Reviewed By: akankshamahajan15 Differential Revision: D34145825 Pulled By: ltamasi fbshipit-source-id: 4e87c948407dee489d669a3e41f59e2fcc1228d8	3 years ago
Levi Tamasi	320d9a8e8a	Use a sorted vector instead of a map to store blob file metadata (#9526) ... Summary: The patch replaces `std::map` with a sorted `std::vector` for `VersionStorageInfo::blob_files_` and preallocates the space for the `vector` before saving the `BlobFileMetaData` into the new `VersionStorageInfo` in `VersionBuilder::Rep::SaveBlobFilesTo`. These changes reduce the time the DB mutex is held while saving new `Version`s, and using a sorted `vector` also makes lookups faster thanks to better memory locality. In addition, the patch introduces helper methods `VersionStorageInfo::GetBlobFileMetaData` and `VersionStorageInfo::GetBlobFileMetaDataLB` that can be used by clients to perform lookups in the `vector`, and does some general cleanup in the parts of code where blob file metadata are used. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9526 Test Plan: Ran `make check` and the crash test script for a while. Performance was tested using a load-optimized benchmark (`fillseq` with vector memtable, no WAL) and small file sizes so that a significant number of files are produced: ``` numactl --interleave=all ./db_bench --benchmarks=fillseq --allow_concurrent_memtable_write=false --level0_file_num_compaction_trigger=4 --level0_slowdown_writes_trigger=20 --level0_stop_writes_trigger=30 --max_background_jobs=8 --max_write_buffer_number=8 --db=/data/ltamasi-dbbench --wal_dir=/data/ltamasi-dbbench --num=800000000 --num_levels=8 --key_size=20 --value_size=400 --block_size=8192 --cache_size=51539607552 --cache_numshardbits=6 --compression_max_dict_bytes=0 --compression_ratio=0.5 --compression_type=lz4 --bytes_per_sync=8388608 --cache_index_and_filter_blocks=1 --cache_high_pri_pool_ratio=0.5 --benchmark_write_rate_limit=0 --write_buffer_size=16777216 --target_file_size_base=16777216 --max_bytes_for_level_base=67108864 --verify_checksum=1 --delete_obsolete_files_period_micros=62914560 --max_bytes_for_level_multiplier=8 --statistics=0 --stats_per_interval=1 --stats_interval_seconds=20 --histogram=1 --memtablerep=skip_list --bloom_bits=10 --open_files=-1 --subcompactions=1 --compaction_style=0 --min_level_to_compress=3 --level_compaction_dynamic_level_bytes=true --pin_l0_filter_and_index_blocks_in_cache=1 --soft_pending_compaction_bytes_limit=167503724544 --hard_pending_compaction_bytes_limit=335007449088 --min_level_to_compress=0 --use_existing_db=0 --sync=0 --threads=1 --memtablerep=vector --allow_concurrent_memtable_write=false --disable_wal=1 --enable_blob_files=1 --blob_file_size=16777216 --min_blob_size=0 --blob_compression_type=lz4 --enable_blob_garbage_collection=1 --seed=<some value> ``` Final statistics before the patch: ``` Cumulative writes: 0 writes, 700M keys, 0 commit groups, 0.0 writes per commit group, ingest: 284.62 GB, 121.27 MB/s Interval writes: 0 writes, 334K keys, 0 commit groups, 0.0 writes per commit group, ingest: 139.28 MB, 72.46 MB/s ``` With the patch: ``` Cumulative writes: 0 writes, 760M keys, 0 commit groups, 0.0 writes per commit group, ingest: 308.66 GB, 131.52 MB/s Interval writes: 0 writes, 445K keys, 0 commit groups, 0.0 writes per commit group, ingest: 185.35 MB, 93.15 MB/s ``` Total time to complete the benchmark is 2611 seconds with the patch, down from 2986 secs. Reviewed By: riversand963 Differential Revision: D34082728 Pulled By: ltamasi fbshipit-source-id: fc598abf676dce436734d06bb9d2d99a26a004fc	3 years ago
Levi Tamasi	0cc0543893	Mitigate the overhead of building the hash of file locations (#9504) ... Summary: The patch builds on the refactoring done in https://github.com/facebook/rocksdb/issues/9494 and improves the performance of building the hash of file locations in `VersionStorageInfo` in two ways. First, the hash building is moved from `AddFile` (which is called under the DB mutex) to a separate post-processing step done as part of `PrepareForVersionAppend` (during which the mutex is *not* held). Second, the space necessary for the hash is preallocated to prevent costly reallocation/rehashing operations. These changes mitigate the overhead of the file location hash, which can be significant with certain workloads where the baseline CPU usage is low (see https://github.com/facebook/rocksdb/issues/9351, which is a workload where keys are sorted, WAL is turned off, the vector memtable implementation is used, and there are lots of small SST files). Fixes https://github.com/facebook/rocksdb/issues/9351 Pull Request resolved: https://github.com/facebook/rocksdb/pull/9504 Test Plan: `make check` ``` numactl --interleave=all ./db_bench --benchmarks=fillseq --allow_concurrent_memtable_write=false --level0_file_num_compaction_trigger=4 --level0_slowdown_writes_trigger=20 --level0_stop_writes_trigger=30 --max_background_jobs=8 --max_write_buffer_number=8 --db=/data/ltamasi-dbbench --wal_dir=/data/ltamasi-dbbench --num=800000000 --num_levels=8 --key_size=20 --value_size=400 --block_size=8192 --cache_size=51539607552 --cache_numshardbits=6 --compression_max_dict_bytes=0 --compression_ratio=0.5 --compression_type=lz4 --bytes_per_sync=8388608 --cache_index_and_filter_blocks=1 --cache_high_pri_pool_ratio=0.5 --benchmark_write_rate_limit=0 --write_buffer_size=16777216 --target_file_size_base=16777216 --max_bytes_for_level_base=67108864 --verify_checksum=1 --delete_obsolete_files_period_micros=62914560 --max_bytes_for_level_multiplier=8 --statistics=0 --stats_per_interval=1 --stats_interval_seconds=20 --histogram=1 --bloom_bits=10 --open_files=-1 --subcompactions=1 --compaction_style=0 --level_compaction_dynamic_level_bytes=true --pin_l0_filter_and_index_blocks_in_cache=1 --soft_pending_compaction_bytes_limit=167503724544 --hard_pending_compaction_bytes_limit=335007449088 --min_level_to_compress=0 --use_existing_db=0 --sync=0 --threads=1 --memtablerep=vector --disable_wal=1 --seed=<some_seed> ``` Final statistics before this patch: ``` Cumulative writes: 0 writes, 697M keys, 0 commit groups, 0.0 writes per commit group, ingest: 283.25 GB, 241.08 MB/s Interval writes: 0 writes, 1264K keys, 0 commit groups, 0.0 writes per commit group, ingest: 525.69 MB, 176.67 MB/s ``` With the patch: ``` Cumulative writes: 0 writes, 759M keys, 0 commit groups, 0.0 writes per commit group, ingest: 308.57 GB, 262.63 MB/s Interval writes: 0 writes, 1555K keys, 0 commit groups, 0.0 writes per commit group, ingest: 646.61 MB, 215.11 MB/s ``` Reviewed By: riversand963 Differential Revision: D34014734 Pulled By: ltamasi fbshipit-source-id: acb2703677451d5ccaa7e9d950844b33d240695b	3 years ago
Levi Tamasi	42e0751b3a	Clean up VersionStorageInfo a bit (#9494) ... Summary: The patch does some cleanup in and around `VersionStorageInfo`: * Renames the method `PrepareApply` to `PrepareAppend` in `Version` to make it clear that it is to be called before appending the `Version` to `VersionSet` (via `AppendVersion`), not before applying any `VersionEdit`s. * Introduces a helper method `VersionStorageInfo::PrepareForVersionAppend` (called by `Version::PrepareAppend`) that encapsulates the population of the various derived data structures in `VersionStorageInfo`, and turns the methods computing the derived structures (`UpdateNumNonEmptyLevels`, `CalculateBaseBytes` etc.) into private helpers. * Changes `Version::PrepareAppend` so it only calls `UpdateAccumulatedStats` if the `update_stats` flag is set. (Earlier, this was checked by the callee.) Related to this, it also moves the call to `ComputeCompensatedSizes` to `VersionStorageInfo::PrepareForVersionAppend`. * Updates and cleans up `version_builder_test`, `version_set_test`, and `compaction_picker_test` so `PrepareForVersionAppend` is called anytime a new `VersionStorageInfo` is set up or saved. This cleanup also involves splitting `VersionStorageInfoTest.MaxBytesForLevelDynamic` into multiple smaller test cases. * Fixes up a bunch of comments that were outdated or just plain incorrect. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9494 Test Plan: Ran `make check` and the crash test script for a while. Reviewed By: riversand963 Differential Revision: D33971666 Pulled By: ltamasi fbshipit-source-id: fda52faac7783041126e4f8dec0fe01bdcadf65a	3 years ago
Peter Dillinger	fc9d4071f0	Fast path for detecting unchanged prefix_extractor (#9407) ... Summary: Fixes a major performance regression in 6.26, where extra CPU is spent in SliceTransform::AsString when reads involve a prefix_extractor (Get, MultiGet, Seek). Common case performance is now better than 6.25. This change creates a "fast path" for verifying that the current prefix extractor is unchanged and compatible with what was used to generate a table file. This fast path detects the common case by pointer comparison on the current prefix_extractor and a "known good" prefix extractor (if applicable) that is saved at the time the table reader is opened. The "known good" prefix extractor is saved as another shared_ptr copy (in an existing field, however) to ensure the pointer is not recycled. When the prefix_extractor has changed to a different instance but same compatible configuration (rare, odd), performance is still a regression compared to 6.25, but this is likely acceptable because of the oddity of such a case. The performance of incompatible prefix_extractor is essentially unchanged. Also fixed a minor case (ForwardIterator) where a prefix_extractor could be used via a raw pointer after being freed as a shared_ptr, if replaced via SetOptions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9407 Test Plan: ## Performance Populate DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12` Running head-to-head comparisons simultaneously with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=seekrandom -num=10000000 -duration=20 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12` Below each is compared by ops/sec vs. baseline which is version 6.25 (multiple baseline runs because of variable machine load) v6.26: 4833 vs. 6698 (<- major regression!) v6.27: 4737 vs. 6397 (still) New: 6704 vs. 6461 (better than baseline in common case) Disabled fastpath: 4843 vs. 6389 (e.g. if prefix extractor instance changes but is still compatible) Changed prefix size (no usable filter) in new: 787 vs. 5927 Changed prefix size (no usable filter) in new & baseline: 773 vs. 784 Reviewed By: mrambacher Differential Revision: D33677812 Pulled By: pdillinger fbshipit-source-id: 571d9711c461fb97f957378a061b7e7dbc4d6a76	3 years ago
Andrew Kryczka	b860a42158	Recover to exact latest seqno of data committed to MANIFEST (#9305) ... Summary: The LastSequence field in the MANIFEST file is the baseline seqno for a recovered DB. Recovering WAL entries might cause the recovered DB's seqno to advance above this baseline, but the recovered DB will never use a smaller seqno. Before this PR, we were writing the DB's seqno at the time of LogAndApply() as the LastSequence value. This works in the sense that it is a large enough baseline for the recovered DB that it'll never overwrite any records in existing SST files. At the same time, it's arbitrarily larger than what's needed. This behavior comes from LevelDB, where there was no tracking of largest seqno in an SST file. Now we know the largest seqno of newly written SST files, so we can write an exact value in LastSequence that actually reflects the largest seqno in any file referred to by the MANIFEST. This is primarily useful for correctness testing with unsynced data loss, where the recovered DB's seqno needs to indicate what records were recovered. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9305 Test Plan: - https://github.com/facebook/rocksdb/issues/9338 adds crash-recovery correctness testing coverage for WAL disabled use cases - https://github.com/facebook/rocksdb/issues/9357 will extend that testing to cover file ingestion - Added assertion at end of LogAndApply() for `VersionSet::descriptor_last_sequence_` consistency with files - Manually tested upgrade/downgrade compatibility with a custom crash test that randomly picks between a `db_stress` built with and without this PR (for old code it must run with `-disable_wal=0`) Reviewed By: riversand963 Differential Revision: D33182770 Pulled By: ajkr fbshipit-source-id: 0bfafaf685f347cc8cb0e1d62e0186340a738f7d	3 years ago
Peter Dillinger	653c392e47	More refactoring ahead of footer & meta changes (#9240) ... Summary: I'm working on a new format_version=6 to support context checksum (https://github.com/facebook/rocksdb/issues/9058) and this includes much of the refactoring and test updates to support that change. Test coverage data and manual inspection agree on dead code in block_based_table_reader.cc (removed). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9240 Test Plan: tests enhanced to cover more cases etc. Extreme case performance testing indicates small % regression in fillseq (w/ compaction), though CPU profile etc. doesn't suggest any explanation. There is enhanced correctness checking in Footer::DecodeFrom, but this should be negligible. TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=1 --disable_wal={false,true} (Each is ops/s averaged over 50 runs, run simultaneously with competing configuration for load fairness) Before w/ wal: 454512 After w/ wal: 444820 (-2.1%) Before w/o wal: 1004560 After w/o wal: 998897 (-0.6%) Since this doesn't modify WAL code, one would expect real effects to be larger in w/o wal case. This regression will be corrected in a follow-up PR. Reviewed By: ajkr Differential Revision: D32813769 Pulled By: pdillinger fbshipit-source-id: 444a244eabf3825cd329b7d1b150cddce320862f	3 years ago
sdong	88875df821	File temperature information should be preserved when restart the DB (#9242) ... Summary: Fix a bug that causes file temperature not preserved after DB is restarted, or options.max_manifest_file_size is hit. Also, pass temperature information to NewRandomAccessFile() to allow users to hack a solution where they don't preserve tiering information. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9242 Test Plan: Add a unit test that would fail without the fix. Reviewed By: jay-zhuang Differential Revision: D32818150 fbshipit-source-id: 36aa3f148c60107f7b8e9d65b63b039f9e1a1eec	3 years ago
Levi Tamasi	dc5de45af8	Support readahead during compaction for blob files (#9187) ... Summary: The patch adds a new BlobDB configuration option `blob_compaction_readahead_size` that can be used to enable prefetching data from blob files during compaction. This is important when using storage with higher latencies like HDDs or remote filesystems. If enabled, prefetching is used for all cases when blobs are read during compaction, namely garbage collection, compaction filters (when the existing value has to be read from a blob file), and `Merge` (when the value of the base `Put` is stored in a blob file). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9187 Test Plan: Ran `make check` and the stress/crash test. Reviewed By: riversand963 Differential Revision: D32565512 Pulled By: ltamasi fbshipit-source-id: 87be9cebc3aa01cc227bec6b5f64d827b8164f5d	3 years ago
Peter Dillinger	230660be73	Improve / clean up meta block code & integrity (#9163) ... Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9	3 years ago
Akanksha Mahajan	17ce1ca48b	Reuse internal auto readhead_size at each Level (expect L0) for Iterations (#9056) ... Summary: RocksDB does auto-readahead for iterators on noticing more than two sequential reads for a table file if user doesn't provide readahead_size. The readahead starts at 8KB and doubles on every additional read up to max_auto_readahead_size. However at each level, if iterator moves over next file, readahead_size starts again from 8KB. This PR introduces a new ReadOption "adaptive_readahead" which when set true will maintain readahead_size at each level. So when iterator moves from one file to another, new file's readahead_size will continue from previous file's readahead_size instead of scratch. However if reads are not sequential it will fall back to 8KB (default) with no prefetching for that block. 1. If block is found in cache but it was eligible for prefetch (block wasn't in Rocksdb's prefetch buffer), readahead_size will decrease by 8KB. 2. It maintains readahead_size for L1 - Ln levels. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9056 Test Plan: Added new unit tests Ran db_bench for "readseq, seekrandom, seekrandomwhilewriting, readrandom" with --adaptive_readahead=true and there was no regression if new feature is enabled. Reviewed By: anand1976 Differential Revision: D31773640 Pulled By: akankshamahajan15 fbshipit-source-id: 7332d16258b846ae5cea773009195a5af58f8f98	3 years ago
slk	937fbcbddc	Track per-SST user-defined timestamp information in MANIFEST (#9092) ... Summary: Track per-SST user-defined timestamp information in MANIFEST https://github.com/facebook/rocksdb/issues/8957 Rockdb has supported user-defined timestamp feature. Application can specify a timestamp when writing each k-v pair. When data flush from memory to disk file called SST files, file creation activity will commit to MANIFEST. This commit is for tracking timestamp info in the MANIFEST for each file. The changes involved are as follows: 1) Track max/min timestamp in FileMetaData, and fix invoved codes. 2) Add NewFileCustomTag::kMinTimestamp and NewFileCustomTag::kMinTimestamp in NewFileCustomTag ( in the kNewFile4 part ), and support invoved codes such as VersionEdit Encode and Decode etc. 3) Add unit test code for VersionEdit EncodeDecodeNewFile4, and fix invoved test codes. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9092 Reviewed By: ajkr, akankshamahajan15 Differential Revision: D32252323 Pulled By: riversand963 fbshipit-source-id: d2642898d6e3ad1fef0eb866b98045408bd4e162	3 years ago
Levi Tamasi	3fbddb1d27	Refactor and unify blob file saving and the logic that finds the oldest live blob file (#9122) ... Summary: The patch refactors and unifies the logic in `VersionBuilder::SaveBlobFilesTo` and `VersionBuilder::GetMinOldestBlobFileNumber` by introducing a generic helper that can "merge" the list of `BlobFileMetaData` in the base version with the list of `MutableBlobFileMetaData` representing the updated state after applying a sequence of `VersionEdit`s. This serves as groundwork for subsequent changes that will enable us to determine whether a blob file is live after applying a sequence of edits without calling `VersionBuilder::SaveTo`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9122 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D32151472 Pulled By: ltamasi fbshipit-source-id: 11622b475866de823334b8bc21b0e99d913af97e	3 years ago
Levi Tamasi	081722780b	Refactor the detailed consistency checks and the SST saving logic in VersionBuilder (#9099) ... Summary: The patch refactors the parts of `VersionBuilder` that deal with SST file comparisons. Specifically, it makes the following changes: * Turns `NewestFirstBySeqNo` and `BySmallestKey` from free-standing functions into function objects. Note: `BySmallestKey` has a pointer to the `InternalKeyComparator`, while `NewestFirstBySeqNo` is completely stateless. * Eliminates the wrapper `FileComparator`, which was essentially an unnecessary DIY virtual function call mechanism. * Refactors `CheckConsistencyDetails` and `SaveSSTFilesTo` using helper function templates that take comparator/checker function objects. Using static polymorphism eliminates the need to make runtime decisions about which comparator to use. * Extends some error messages returned by the consistency checks and makes them more uniform. * Removes some incomplete/redundant consistency checks from `VersionBuilder` and `FilePicker`. * Improves const correctness in several places. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9099 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D32027503 Pulled By: ltamasi fbshipit-source-id: 621326ae41f4f55f7ad6a91abbd6e666d5c7857c	3 years ago
sdong	a2b9be42b6	Try to start TTL earlier with kMinOverlappingRatio is used (#8749) ... Summary: Right now, when options.ttl is set, compactions are triggered around the time when TTL is reached. This might cause extra compactions which are often bursty. This commit tries to mitigate it by picking those files earlier in normal compaction picking process. This is only implemented using kMinOverlappingRatio with Leveled compaction as it is the default value and it is more complicated to change other styles. When a file is aged more than ttl/2, RocksDB starts to boost the compaction priority of files in normal compaction picking process, and hope by the time TTL is reached, very few extra compaction is needed. In order for this to work, another change is made: during a compaction, if an output level file is older than ttl/2, cut output files based on original boundary (if it is not in the last level). This is to make sure that after an old file is moved to the next level, and new data is merged from the upper level, the new data falling into this range isn't reset with old timestamp. Without this change, in many cases, most files from one level will keep having old timestamp, even if they have newer data and we stuck in it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8749 Test Plan: Add a unit test to test the boosting logic. Will add a unit test to test it end-to-end. Reviewed By: jay-zhuang Differential Revision: D30735261 fbshipit-source-id: 503c2d89250b22911eb99e72b379be154de3428e	3 years ago
Peter Dillinger	3ffb3baa0b	Add (Live)FileStorageInfo API (#8968) ... Summary: New classes FileStorageInfo and LiveFileStorageInfo and 'experimental' function DB::GetLiveFilesStorageInfo, which is intended to largely replace several fragmented DB functions needed to create checkpoints and backups. This function is now used to create checkpoints and backups, because it fixes many (probably not all) of the prior complexities of checkpoint not having atomic access to DB metadata. This also ensures strong functional test coverage of the new API. Specifically, much of the old CheckpointImpl::CreateCustomCheckpoint has been migrated to and updated in DBImpl::GetLiveFilesStorageInfo, with the former now calling the latter. Also, the class FileStorageInfo in metadata.h compatibly replaces BackupFileInfo and serves as a new base class for SstFileMetaData. Some old fields of SstFileMetaData are still provided (for now) but deprecated. Although FileStorageInfo::directory is accurate when using db_paths and/or cf_paths, these have never been supported by Checkpoint nor BackupEngine and still are not. This change does now detect these cases and return NotSupported when appropriate. (More work needed for support.) Somehow this change broke ProgressCallbackDuringBackup, but the progress_callback logic was dubious to begin with because it would call the callback based on copy buffer size, not size actually copied. Logic and test updated to track size actually copied per-thread. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8968 Test Plan: tests updated. DB::GetLiveFilesStorageInfo mostly tested by use in CheckpointImpl. DBTest.SnapshotFiles updated to also test GetLiveFilesStorageInfo, including reading the data after DB close. Added CheckpointTest.CheckpointWithDbPath (NotSupported). Reviewed By: siying Differential Revision: D31242045 Pulled By: pdillinger fbshipit-source-id: b183d1ce9799e220daaefd6b3b5365d98de676c0	3 years ago
Levi Tamasi	3e1bf771a3	Make it possible to force the garbage collection of the oldest blob files (#8994) ... Summary: The current BlobDB garbage collection logic works by relocating the valid blobs from the oldest blob files as they are encountered during compaction, and cleaning up blob files once they contain nothing but garbage. However, with sufficiently skewed workloads, it is theoretically possible to end up in a situation when few or no compactions get scheduled for the SST files that contain references to the oldest blob files, which can lead to increased space amp due to the lack of GC. In order to efficiently handle such workloads, the patch adds a new BlobDB configuration option called `blob_garbage_collection_force_threshold`, which signals to BlobDB to schedule targeted compactions for the SST files that keep alive the oldest batch of blob files if the overall ratio of garbage in the given blob files meets the threshold *and* all the given blob files are eligible for GC based on `blob_garbage_collection_age_cutoff`. (For example, if the new option is set to 0.9, targeted compactions will get scheduled if the sum of garbage bytes meets or exceeds 90% of the sum of total bytes in the oldest blob files, assuming all affected blob files are below the age-based cutoff.) The net result of these targeted compactions is that the valid blobs in the oldest blob files are relocated and the oldest blob files themselves cleaned up (since *all* SST files that rely on them get compacted away). These targeted compactions are similar to periodic compactions in the sense that they force certain SST files that otherwise would not get picked up to undergo compaction and also in the sense that instead of merging files from multiple levels, they target a single file. (Note: such compactions might still include neighboring files from the same level due to the need of having a "clean cut" boundary but they never include any files from any other level.) This functionality is currently only supported with the leveled compaction style and is inactive by default (since the default value is set to 1.0, i.e. 100%). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8994 Test Plan: Ran `make check` and tested using `db_bench` and the stress/crash tests. Reviewed By: riversand963 Differential Revision: D31489850 Pulled By: ltamasi fbshipit-source-id: 44057d511726a0e2a03c5d9313d7511b3f0c4eab	3 years ago
Stefan Roesch	a776406de3	Add file operation callbacks to SequentialFileReader (#8982) ... Summary: This change adds File IO Notifications to the SequentialFileReader The SequentialFileReader is extended with a listener parameter. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8982 Test Plan: A new test EventListenerTest::OnWALOperationTest has been added. The test verifies that during restore the sequential file reader is called and the notifications are fired. Reviewed By: riversand963 Differential Revision: D31320844 Pulled By: shrfb fbshipit-source-id: 040b24da7c010d7c14ebb5c6460fae9a19b8c168	3 years ago
mrambacher	13ae16c315	Cleanup includes in dbformat.h (#8930) ... Summary: This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead. Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing. Hopefully, this sort of code hygiene cleanup will speed up the builds... Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930 Reviewed By: pdillinger Differential Revision: D31142788 Pulled By: mrambacher fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d	3 years ago
Yanqin Jin	b92cef2d1d	Sort per-file blob read requests by offset (#8953) ... Summary: `RandomAccessFileReader::MultiRead()` tries to merge requests in direct IO, assuming input IO requests are sorted by offsets. Add a test in direct IO mode. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8953 Test Plan: make check Reviewed By: ltamasi Differential Revision: D31183546 Pulled By: riversand963 fbshipit-source-id: 5d043ec68e2daa47a3149066150afd41ee3d73e6	3 years ago
Yanqin Jin	b512f4bc76	Batch blob read IO for MultiGet (#8699) ... Summary: In batched `MultiGet()`, RocksDB batches blob read IO and uses `RandomAccessFileReader::MultiRead()` to read the blobs instead of issuing multiple `Read()`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8699 Test Plan: ``` make check ``` Reviewed By: ltamasi Differential Revision: D31030861 Pulled By: riversand963 fbshipit-source-id: a0df6060cbfd54cff9515a4eee08807b1dbcb0c8	3 years ago
Levi Tamasi	306b779957	Use GetBlobFileSize instead of GetTotalBlobBytes in DB properties (#8902) ... Summary: The patch adjusts the definition of BlobDB's DB properties a bit by switching to `GetBlobFileSize` from `GetTotalBlobBytes`. The difference is that the value returned by `GetBlobFileSize` includes the blob file header and footer as well, and thus matches the on-disk size of blob files. In addition, the patch removes the `Version` number from the `blob_stats` property, and updates/extends the unit tests a little. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8902 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D30859542 Pulled By: ltamasi fbshipit-source-id: e3426d2d567bd1bd8c8636abdafaafa0743c854c	3 years ago
Zhiyi Zhang	0cb0fc6fd3	Add DB properties for BlobDB (#8734) ... Summary: RocksDB exposes certain internal statistics via the DB property interface. However, there are currently no properties related to BlobDB. For starters, we would like to add the following BlobDB properties: `rocksdb.num-blob-files`: number of blob files in the current Version (kind of like `num-files-at-level` but note this is not per level, since blob files are not part of the LSM tree). `rocksdb.blob-stats`: this could return the total number and size of all blob files, and potentially also the total amount of garbage (in bytes) in the blob files in the current Version. `rocksdb.total-blob-file-size`: the total size of all blob files (as a blob counterpart for `total-sst-file-size`) of all Versions. `rocksdb.live-blob-file-size`: the total size of all blob files in the current Version. `rocksdb.estimate-live-data-size`: this is actually an existing property that we can extend so it considers blob files as well. When it comes to blobs, we actually have an exact value for live bytes. Namely, live bytes can be computed simply as total bytes minus garbage bytes, summed over the entire set of blob files in the Version. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8734 Test Plan: ``` ➜ rocksdb git:(new_feature_blobDB_properties) ./db_blob_basic_test [==========] Running 16 tests from 2 test cases. [----------] Global test environment set-up. [----------] 10 tests from DBBlobBasicTest [ RUN ] DBBlobBasicTest.GetBlob [ OK ] DBBlobBasicTest.GetBlob (12 ms) [ RUN ] DBBlobBasicTest.MultiGetBlobs [ OK ] DBBlobBasicTest.MultiGetBlobs (11 ms) [ RUN ] DBBlobBasicTest.GetBlob_CorruptIndex [ OK ] DBBlobBasicTest.GetBlob_CorruptIndex (10 ms) [ RUN ] DBBlobBasicTest.GetBlob_InlinedTTLIndex [ OK ] DBBlobBasicTest.GetBlob_InlinedTTLIndex (12 ms) [ RUN ] DBBlobBasicTest.GetBlob_IndexWithInvalidFileNumber [ OK ] DBBlobBasicTest.GetBlob_IndexWithInvalidFileNumber (9 ms) [ RUN ] DBBlobBasicTest.GenerateIOTracing [ OK ] DBBlobBasicTest.GenerateIOTracing (11 ms) [ RUN ] DBBlobBasicTest.BestEffortsRecovery_MissingNewestBlobFile [ OK ] DBBlobBasicTest.BestEffortsRecovery_MissingNewestBlobFile (13 ms) [ RUN ] DBBlobBasicTest.GetMergeBlobWithPut [ OK ] DBBlobBasicTest.GetMergeBlobWithPut (11 ms) [ RUN ] DBBlobBasicTest.MultiGetMergeBlobWithPut [ OK ] DBBlobBasicTest.MultiGetMergeBlobWithPut (14 ms) [ RUN ] DBBlobBasicTest.BlobDBProperties [ OK ] DBBlobBasicTest.BlobDBProperties (21 ms) [----------] 10 tests from DBBlobBasicTest (124 ms total) [----------] 6 tests from DBBlobBasicTest/DBBlobBasicIOErrorTest [ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.GetBlob_IOError/0 [ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.GetBlob_IOError/0 (12 ms) [ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.GetBlob_IOError/1 [ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.GetBlob_IOError/1 (10 ms) [ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.MultiGetBlobs_IOError/0 [ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.MultiGetBlobs_IOError/0 (10 ms) [ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.MultiGetBlobs_IOError/1 [ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.MultiGetBlobs_IOError/1 (10 ms) [ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.CompactionFilterReadBlob_IOError/0 [ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.CompactionFilterReadBlob_IOError/0 (1011 ms) [ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.CompactionFilterReadBlob_IOError/1 [ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.CompactionFilterReadBlob_IOError/1 (1013 ms) [----------] 6 tests from DBBlobBasicTest/DBBlobBasicIOErrorTest (2066 ms total) [----------] Global test environment tear-down [==========] 16 tests from 2 test cases ran. (2190 ms total) [ PASSED ] 16 tests. ``` Reviewed By: ltamasi Differential Revision: D30690849 Pulled By: Zhiyi-Zhang fbshipit-source-id: a7567319487ad76bd1a2e24bf143afdbbd9e4346	3 years ago
sdong	e7c24168d8	Move old files to warm tier in FIFO compactions (#8310) ... Summary: Some FIFO users want to keep the data for longer, but the old data is rarely accessed. This feature allows users to configure FIFO compaction so that data older than a threshold is moved to a warm storage tier. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8310 Test Plan: Add several unit tests. Reviewed By: ajkr Differential Revision: D28493792 fbshipit-source-id: c14824ea634814dee5278b449ab5c98b6e0b5501	3 years ago