Tag:
Branch:
Tree:
27f3af5966
main
oxigraph-8.1.1
oxigraph-8.3.2
oxigraph-main
${ noResults }
1416 Commits (27f3af596609f3b86af5080cc870c869e836e7f2)
| Author | SHA1 | Message | Date |
|---|---|---|---|
Peter Dillinger
|
27f3af5966 |
Fix serious FSDirectory use-after-Close bug (missing fsync) (#10460)
Summary: TL;DR: due to a recent change, if you drop a column family, often that DB will no longer fsync after writing new SST files to remaining or new column families, which could lead to data loss on power loss. More bug detail: The intent of https://github.com/facebook/rocksdb/issues/10049 was to Close FSDirectory objects at DB::Close time rather than waiting for DB object destruction. Unfortunately, it also closes shared FSDirectory objects on DropColumnFamily (& destroy remaining handles), which can lead to use-after-Close on FSDirectory shared with remaining column families. Those "uses" are only Fsyncs (or redundant Closes). In the default Posix filesystem, an Fsync on a closed FSDirectory is a quiet no-op. Consequently (under most configurations), if you drop a column family, that DB will no longer fsync after writing new SST files to column families sharing the same directory (true under most configurations). More fix detail: Basically, this removes unnecessary Close ops on destroying ColumnFamilyData. We let `shared_ptr` take care of calling the destructor at the right time. If the intent was to require Close be called before destroying FSDirectory, that was not made clear by the author of FileSystem and was not at all enforced by https://github.com/facebook/rocksdb/issues/10049, which could have added `assert(fd_ == -1)` to `~PosixDirectory()` but did not. To keep this fix simple, we relax the unit test for https://github.com/facebook/rocksdb/issues/10049 to allow timely destruction of FSDirectory to suffice as Close (in CountedFileSystem). Added a TODO to revisit that. Also in this PR: * Added a TODO to share FSDirectory instances between DB and its column families. (Already shared among column families.) * Made DB::Close attempt to close all its open FSDirectory objects even if there is a failure in closing one. Also code clean-up around this logic. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10460 Test Plan: add an assert to check for use-after-Close. With that existing tests can detect the misuse. With fix, tests pass (except noted relaxing of unit test for https://github.com/facebook/rocksdb/issues/10049) Reviewed By: ajkr Differential Revision: D38357922 Pulled By: pdillinger fbshipit-source-id: d42079cadbedf0a969f03389bf586b3b4e1f9137 |
2 years ago |
|
Jay Zhuang
|
fcccc412d7 |
Remove Travis CI (#10407)
Summary: Travis CI is depreciated and haven't been maintained for some time. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10407 Reviewed By: ajkr Differential Revision: D38078382 Pulled By: jay-zhuang fbshipit-source-id: f42057f2f41f722bdce56bf195f67a94835191fb |
2 years ago |
|
DaPorkchop_
|
6bebe65030 |
Correctly implement Create-/DropColumnFamilies for PessimisticTransactionDB (#10332)
Summary: This overrides `CreateColumnFamilies` and `DropColumnFamilies` in `PessimisticTransactionDB` in order to add/remove the created column families to/from the lock manager. Fixes https://github.com/facebook/rocksdb/issues/10322. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10332 Reviewed By: ajkr Differential Revision: D37841079 Pulled By: riversand963 fbshipit-source-id: 854d7d9948b0089e0054a8f2875485ba44436fd2 |
2 years ago |
|
Wallace
|
1e9bf25f61 |
Do not hold mutex when write keys if not necessary (#7516)
Summary: ## Problem Summary RocksDB will acquire the global mutex of db instance for every time when user calls `Write`. When RocksDB schedules a lot of compaction jobs, it will compete the mutex with write thread and it will hurt the write performance. ## Problem Solution: I want to use log_write_mutex to replace the global mutex in most case so that we do not acquire it in write-thread unless there is a write-stall event or a write-buffer-full event occur. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7516 Test Plan: 1. make check 2. CI 3. COMPILE_WITH_TSAN=1 make db_stress make crash_test make crash_test_with_multiops_wp_txn make crash_test_with_multiops_wc_txn make crash_test_with_atomic_flush Reviewed By: siying Differential Revision: D36908702 Pulled By: riversand963 fbshipit-source-id: 59b13881f4f5c0a58fd3ca79128a396d9cd98efe |
2 years ago |
|
Andrew Kryczka
|
25cc564ff7 |
Make RateLimiter not Customizable (#10378)
Summary: (PR created for informational/testing purposes only.) - Fixes lost dynamic updates to GenericRateLimiter bandwidth using `SetBytesPerSecond()` - Benefit over #10374 is eliminating race conditions with Configurable framework. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10378 Reviewed By: pdillinger Differential Revision: D37914865 fbshipit-source-id: d4f566d60ec9726d26932388c61671adf0ee0f30 |
2 years ago |
|
Jay Zhuang
|
dcb6a3be4e |
Add helper function to get debug type name (#10243)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10243 Reviewed By: riversand963 Differential Revision: D37370236 Pulled By: jay-zhuang fbshipit-source-id: 6e7a6fadf45fdfb5afe97b3f6fe4acf1260d4a86 |
2 years ago |
|
Peter Dillinger
|
e6c5e0ab9a |
Have Cache use Status::MemoryLimit (#10262)
Summary:
I noticed it would clean up some things to have Cache::Insert()
return our MemoryLimit Status instead of Incomplete for the case in
which the capacity limit is reached. I suspect this fixes some existing but
unknown bugs where this Incomplete could be confused with other uses
of Incomplete, especially no_io cases. This is the most suspicious case I
noticed, but was not able to reproduce a bug, in part because the existing
code is not covered by unit tests (FIXME added):
|
2 years ago |
|
yite.gu
|
a9117a3490 |
BackupEngine: we can return immediately if GetFileSize failed (#10176)
Summary: In some case, GetFileSize would be failure in copy_file_cb. If failure, we can return immediately, the subsequent code is meaningless, and add a log info let user know that problem happen here. Singed-off-by: Yite Gu <ess_gyt@qq.com> Pull Request resolved: https://github.com/facebook/rocksdb/pull/10176 Reviewed By: cbi42 Differential Revision: D37510888 Pulled By: ajkr fbshipit-source-id: 044ad8c45852fd19b8cd564b11f65d40c39e296f |
2 years ago |
|
Andrew Kryczka
|
ca81b80d83 |
Deflake RateLimiting/BackupEngineRateLimitingTestWithParam (#10271)
Summary: We saw flakes with the following failure: ``` [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/1 utilities/backup/backup_engine_test.cc:2667: Failure Expected: (restore_time) > (0.8 * rate_limited_restore_time), actual: 48269 vs 60470.4 terminate called after throwing an instance of 'testing::internal::GoogleTestFailureException' what(): utilities/backup/backup_engine_test.cc:2667: Failure Expected: (restore_time) > (0.8 * rate_limited_restore_time), actual: 48269 vs 60470.4 Received signal 6 (Aborted) t/run-backup_engine_test-RateLimiting-BackupEngineRateLimitingTestWithParam.RateLimiting-1: line 4: 1032887 Aborted (core dumped) TEST_TMPDIR=$d ./backup_engine_test --gtest_filter=RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/1 ``` Investigation revealed we forgot to use the mock time `SystemClock` for restore rate limiting. Then the test used wall clock time, which made the execution of "GenericRateLimiter::Request:PostTimedWait" non-deterministic as wall clock time might have advanced enough that waiting was not needed. This PR changes restore rate limiting to use mock time, which guarantees we always execute "GenericRateLimiter::Request:PostTimedWait". Then the assertions that rely on times recorded inside that callback should be robust. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10271 Test Plan: Applied the following patch which guaranteed repro before the fix. Verified the test passes after this PR even with that patch applied. ``` diff --git a/util/rate_limiter.cc b/util/rate_limiter.cc index f369e3220..6b3ed82fa 100644 --- a/util/rate_limiter.cc +++ b/util/rate_limiter.cc @@ -158,6 +158,7 @@ void GenericRateLimiter::SetBytesPerSecond(int64_t bytes_per_second) { void GenericRateLimiter::Request(int64_t bytes, const Env::IOPriority pri, Statistics* stats) { + usleep(100000); assert(bytes <= refill_bytes_per_period_.load(std::memory_order_relaxed)); bytes = std::max(static_cast<int64_t>(0), bytes); TEST_SYNC_POINT("GenericRateLimiter::Request"); ``` Reviewed By: hx235 Differential Revision: D37499848 Pulled By: ajkr fbshipit-source-id: fd790d5a192996be8ba13b656751ccc7d8cb8f6e |
2 years ago |
|
Yanqin Jin
|
9586dcf1ce |
Expose the initial logger creation error (#10223)
Summary: https://github.com/facebook/rocksdb/issues/9984 changes the behavior of RocksDB: if logger creation failed during `SanitizeOptions()`, `DB::Open()` will fail. However, since `SanitizeOptions()` is called in `DBImpl::DBImpl()`, we cannot directly expose the error to caller without some additional work. This is a first version proposal which: - Adds a new member `init_logger_creation_s` to `DBImpl` to store the result of init logger creation - Checks the error during `DB::Open()` and return it to caller if non-ok This is not very ideal. We can alternatively move the logger creation logic out of the `SanitizeOptions()`. Since `SanitizeOptions()` is used in other places, we need to check whether this change breaks anything in case other callers of `SanitizeOptions()` assumes that a logger should be created. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10223 Test Plan: make check Reviewed By: pdillinger Differential Revision: D37321717 Pulled By: riversand963 fbshipit-source-id: 58042358a86369d606549dd9938933dd47591c4b |
2 years ago |
|
Andrew Kryczka
|
d5d8920f2c |
Fix race condition with WAL tracking and `FlushWAL(true /* sync */)` (#10185)
Summary: `FlushWAL(true /* sync */)` is used internally and for manual WAL sync. It had a bug when used together with `track_and_verify_wals_in_manifest` where the synced size tracked in MANIFEST was larger than the number of bytes actually synced. The bug could be repro'd almost immediately with the following crash test command: `python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --max_bytes_for_level_base=2097152 --target_file_size_base=524288 --duration=3600 --interval=10 --sync_fault_injection=1 --disable_wal=0 --checkpoint_one_in=1000 --max_key=10000 --value_size_mult=33`. An example error message produced by the above command is shown below. The error sometimes arose from the checkpoint and other times arose from the main stress test DB. ``` Corruption: Size mismatch: WAL (log number: 119) in MANIFEST is 27938 bytes , but actually is 27859 bytes on disk. ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/10185 Test Plan: - repro unit test - the above crash test command no longer finds the error. It does find a different error after a while longer such as "Corruption: WAL file 481 required by manifest but not in directory list" Reviewed By: riversand963 Differential Revision: D37200993 Pulled By: ajkr fbshipit-source-id: 98e0071c1a89f4d009888512ed89f9219779ae5f |
2 years ago |
|
Hui Xiao
|
a5d773e077 |
Add rate-limiting support to batched MultiGet() (#10159)
Summary: **Context/Summary:** https://github.com/facebook/rocksdb/pull/9424 added rate-limiting support for user reads, which does not include batched `MultiGet()`s that call `RandomAccessFileReader::MultiRead()`. The reason is that it's harder (compared with RandomAccessFileReader::Read()) to implement the ideal rate-limiting where we first call `RateLimiter::RequestToken()` for allowed bytes to multi-read and then consume those bytes by satisfying as many requests in `MultiRead()` as possible. For example, it can be tricky to decide whether we want partially fulfilled requests within one `MultiRead()` or not. However, due to a recent urgent user request, we decide to pursue an elementary (but a conditionally ineffective) solution where we accumulate enough rate limiter requests toward the total bytes needed by one `MultiRead()` before doing that `MultiRead()`. This is not ideal when the total bytes are huge as we will actually consume a huge bandwidth from rate-limiter causing a burst on disk. This is not what we ultimately want with rate limiter. Therefore a follow-up work is noted through TODO comments. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10159 Test Plan: - Modified existing unit test `DBRateLimiterOnReadTest/DBRateLimiterOnReadTest.NewMultiGet` - Traced the underlying system calls `io_uring_enter` and verified they are 10 seconds apart from each other correctly under the setting of `strace -ftt -e trace=io_uring_enter ./db_bench -benchmarks=multireadrandom -db=/dev/shm/testdb2 -readonly -num=50 -threads=1 -multiread_batched=1 -batch_size=100 -duration=10 -rate_limiter_bytes_per_sec=200 -rate_limiter_refill_period_us=1000000 -rate_limit_bg_reads=1 -disable_auto_compactions=1 -rate_limit_user_ops=1` where each `MultiRead()` read about 2000 bytes (inspected by debugger) and the rate limiter grants 200 bytes per seconds. - Stress test: - Verified `./db_stress (-test_cf_consistency=1/test_batches_snapshots=1) -use_multiget=1 -cache_size=1048576 -rate_limiter_bytes_per_sec=10241024 -rate_limit_bg_reads=1 -rate_limit_user_ops=1` work Reviewed By: ajkr, anand1976 Differential Revision: D37135172 Pulled By: hx235 fbshipit-source-id: 73b8e8f14761e5d4b77235dfe5d41f4eea968bcd |
2 years ago |
|
Andrew Kryczka
|
5d6005c780 |
Add WriteOptions::protection_bytes_per_key (#10037)
Summary: Added an option, `WriteOptions::protection_bytes_per_key`, that controls how many bytes per key we use for integrity protection in `WriteBatch`. It takes effect when `WriteBatch::GetProtectionBytesPerKey() == 0`. Currently the only supported value is eight. Invoking a user API with it set to any other nonzero value will result in `Status::NotSupported` returned to the user. There is also a bug fix for integrity protection with `inplace_callback`, where we forgot to take into account the possible change in varint length when calculating KV checksum for the final encoded buffer. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10037 Test Plan: - Manual - Set default value of `WriteOptions::protection_bytes_per_key` to eight and ran `make check -j24` - Enabled in MyShadow for 1+ week - Automated - Unit tests have a `WriteMode` that enables the integrity protection via `WriteOptions` - Crash test - in most cases, use `WriteOptions::protection_bytes_per_key` to enable integrity protection Reviewed By: cbi42 Differential Revision: D36614569 Pulled By: ajkr fbshipit-source-id: 8650087ceac9b61b560f1e5fafe5e1baf9c725fb |
2 years ago |
|
Peter Dillinger
|
126c223714 |
Remove deprecated block-based filter (#10184)
Summary: In https://github.com/facebook/rocksdb/issues/9535, release 7.0, we hid the old block-based filter from being created using the public API, because of its inefficiency. Although we normally maintain read compatibility on old DBs forever, filters are not required for reading a DB, only for optimizing read performance. Thus, it should be acceptable to remove this code and the substantial maintenance burden it carries as useful features are developed and validated (such as user timestamp). This change completely removes the code for reading and writing the old block-based filters, net removing about 1370 lines of code no longer needed. Options removed from testing / benchmarking tools. The prior existence is only evident in a couple of places: * `CacheEntryRole::kDeprecatedFilterBlock` - We can update this public API enum in a major release to minimize source code incompatibilities. * A warning is logged when an old table file is opened that used the old block-based filter. This is provided as a courtesy, and would be a pain to unit test, so manual testing should suffice. Unfortunately, sst_dump does not tell you whether a file uses block-based filter, and the structure of the code makes it very difficult to fix. * To detect that case, `kObsoleteFilterBlockPrefix` (renamed from `kFilterBlockPrefix`) for metaindex is maintained (for now). Other notes: * In some cases where numbers are associated with filter configurations, we have had to update the assigned numbers so that they all correspond to something that exists. * Fixed potential stat counting bug by assuming `filter_checked = false` for cases like `filter == nullptr` rather than assuming `filter_checked = true` * Removed obsolete `block_offset` and `prefix_extractor` parameters from several functions. * Removed some unnecessary checks `if (!table_prefix_extractor() && !prefix_extractor)` because the caller guarantees the prefix extractor exists and is compatible Pull Request resolved: https://github.com/facebook/rocksdb/pull/10184 Test Plan: tests updated, manually test new warning in LOG using base version to generate a DB Reviewed By: riversand963 Differential Revision: D37212647 Pulled By: pdillinger fbshipit-source-id: 06ee020d8de3b81260ffc36ad0c1202cbf463a80 |
2 years ago |
|
Yanqin Jin
|
1777e5f7e9 |
Snapshots with user-specified timestamps (#9879)
Summary: In RocksDB, keys are associated with (internal) sequence numbers which denote when the keys are written to the database. Sequence numbers in different RocksDB instances are unrelated, thus not comparable. It is nice if we can associate sequence numbers with their corresponding actual timestamps. One thing we can do is to support user-defined timestamp, which allows the applications to specify the format of custom timestamps and encode a timestamp with each key. More details can be found at https://github.com/facebook/rocksdb/wiki/User-defined-Timestamp-%28Experimental%29. This PR provides a different but complementary approach. We can associate rocksdb snapshots (defined in https://github.com/facebook/rocksdb/blob/7.2.fb/include/rocksdb/snapshot.h#L20) with **user-specified** timestamps. Since a snapshot is essentially an object representing a sequence number, this PR establishes a bi-directional mapping between sequence numbers and timestamps. In the past, snapshots are usually taken by readers. The current super-version is grabbed, and a `rocksdb::Snapshot` object is created with the last published sequence number of the super-version. You can see that the reader actually has no good idea of what timestamp to assign to this snapshot, because by the time the `GetSnapshot()` is called, an arbitrarily long period of time may have already elapsed since the last write, which is when the last published sequence number is written. This observation motivates the creation of "timestamped" snapshots on the write path. Currently, this functionality is exposed only to the layer of `TransactionDB`. Application can tell RocksDB to create a snapshot when a transaction commits, effectively associating the last sequence number with a timestamp. It is also assumed that application will ensure any two snapshots with timestamps should satisfy the following: ``` snapshot1.seq < snapshot2.seq iff. snapshot1.ts < snapshot2.ts ``` If the application can guarantee that when a reader takes a timestamped snapshot, there is no active writes going on in the database, then we also allow the user to use a new API `TransactionDB::CreateTimestampedSnapshot()` to create a snapshot with associated timestamp. Code example ```cpp // Create a timestamped snapshot when committing transaction. txn->SetCommitTimestamp(100); txn->SetSnapshotOnNextOperation(); txn->Commit(); // A wrapper API for convenience Status Transaction::CommitAndTryCreateSnapshot( std::shared_ptr<TransactionNotifier> notifier, TxnTimestamp ts, std::shared_ptr<const Snapshot>* ret); // Create a timestamped snapshot if caller guarantees no concurrent writes std::pair<Status, std::shared_ptr<const Snapshot>> snapshot = txn_db->CreateTimestampedSnapshot(100); ``` The snapshots created in this way will be managed by RocksDB with ref-counting and potentially shared with other readers. We provide the following APIs for readers to retrieve a snapshot given a timestamp. ```cpp // Return the timestamped snapshot correponding to given timestamp. If ts is // kMaxTxnTimestamp, then we return the latest timestamped snapshot if present. // Othersise, we return the snapshot whose timestamp is equal to `ts`. If no // such snapshot exists, then we return null. std::shared_ptr<const Snapshot> TransactionDB::GetTimestampedSnapshot(TxnTimestamp ts) const; // Return the latest timestamped snapshot if present. std::shared_ptr<const Snapshot> TransactionDB::GetLatestTimestampedSnapshot() const; ``` We also provide two additional APIs for stats collection and reporting purposes. ```cpp Status TransactionDB::GetAllTimestampedSnapshots( std::vector<std::shared_ptr<const Snapshot>>& snapshots) const; // Return timestamped snapshots whose timestamps fall in [ts_lb, ts_ub) and store them in `snapshots`. Status TransactionDB::GetTimestampedSnapshots( TxnTimestamp ts_lb, TxnTimestamp ts_ub, std::vector<std::shared_ptr<const Snapshot>>& snapshots) const; ``` To prevent the number of timestamped snapshots from growing infinitely, we provide the following API to release timestamped snapshots whose timestamps are older than or equal to a given threshold. ```cpp void TransactionDB::ReleaseTimestampedSnapshotsOlderThan(TxnTimestamp ts); ``` Before shutdown, RocksDB will release all timestamped snapshots. Comparison with user-defined timestamp and how they can be combined: User-defined timestamp persists every key with a timestamp, while timestamped snapshots maintain a volatile mapping between snapshots (sequence numbers) and timestamps. Different internal keys with the same user key but different timestamps will be treated as different by compaction, thus a newer version will not hide older versions (with smaller timestamps) unless they are eligible for garbage collection. In contrast, taking a timestamped snapshot at a certain sequence number and timestamp prevents all the keys visible in this snapshot from been dropped by compaction. Here, visible means (seq < snapshot and most recent). The timestamped snapshot supports the semantics of reading at an exact point in time. Timestamped snapshots can also be used with user-defined timestamp. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9879 Test Plan: ``` make check TEST_TMPDIR=/dev/shm make crash_test_with_txn ``` Reviewed By: siying Differential Revision: D35783919 Pulled By: riversand963 fbshipit-source-id: 586ad905e169189e19d3bfc0cb0177a7239d1bd4 |
2 years ago |
|
Yu Zhang
|
a101c9de60 |
Return "invalid argument" when read timestamp is too old (#10109)
Summary: With this change, when a given read timestamp is smaller than the column-family's full_history_ts_low, Get(), MultiGet() and iterators APIs will return Status::InValidArgument(). Test plan ``` $COMPILE_WITH_ASAN=1 make -j24 all $./db_with_timestamp_basic_test --gtest_filter=DBBasicTestWithTimestamp.UpdateFullHistoryTsLow $ make -j24 check ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/10109 Reviewed By: riversand963 Differential Revision: D36901126 Pulled By: jowlyzhang fbshipit-source-id: 255feb1a66195351f06c1d0e42acb1ff74527f86 |
2 years ago |
|
Peter Dillinger
|
4f78f9699b |
Refactor: Add BlockTypes to make them imply C++ type in block cache (#10098)
Summary: We have three related concepts: * BlockType: an internal enum conceptually indicating a type of SST file block * CacheEntryRole: a user-facing enum for categorizing block cache entries, which is also involved in associated cache entries with an appropriate deleter. Can include categories for non-block cache entries (e.g. memory reservations). * TBlocklike: a C++ type for the actual type behind a void* cache entry. We had some existing code ugliness because BlockType did not imply TBlocklike, because of various kinds of "filter" block. This refactoring fixes that with new BlockTypes. More clean-up can come in later work. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10098 Test Plan: existing tests Reviewed By: akankshamahajan15 Differential Revision: D36897945 Pulled By: pdillinger fbshipit-source-id: 3ae496b5caa81e0a0ed85e873eb5b525e2d9a295 |
2 years ago |
|
Yanqin Jin
|
3e02c6e05a |
Point-lookup returns timestamps of Delete and SingleDelete (#10056)
Summary: If caller specifies a non-null `timestamp` argument in `DB::Get()` or a non-null `timestamps` in `DB::MultiGet()`, RocksDB will return the timestamps of the point tombstones. Note: DeleteRange is still unsupported. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10056 Test Plan: make check Reviewed By: ltamasi Differential Revision: D36677956 Pulled By: riversand963 fbshipit-source-id: 2d7af02cc7237b1829cd269086ea895a49d501ae |
2 years ago |
|
Zichen Zhu
|
65893ad959 |
Explicitly closing all directory file descriptors (#10049)
Summary: Currently, the DB directory file descriptor is left open until the deconstruction process (`DB::Close()` does not close the file descriptor). To verify this, comment out the lines between `db_ = nullptr` and `db_->Close()` (line 512, 513, 514, 515 in ldb_cmd.cc) to leak the ``db_'' object, build `ldb` tool and run ``` strace --trace=open,openat,close ./ldb --db=$TEST_TMPDIR --ignore_unknown_options put K1 V1 --create_if_missing ``` There is one directory file descriptor that is not closed in the strace log. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10049 Test Plan: Add a new unit test DBBasicTest.DBCloseAllDirectoryFDs: Open a database with different WAL directory and three different data directories, and all directory file descriptors should be closed after calling Close(). Explicitly call Close() after a directory file descriptor is not used so that the counter of directory open and close should be equivalent. Reviewed By: ajkr, hx235 Differential Revision: D36722135 Pulled By: littlepig2013 fbshipit-source-id: 07bdc2abc417c6b30997b9bbef1f79aa757b21ff |
2 years ago |
|
Jay Zhuang
|
0adac6f88e |
Deflake Transaction stress tests (#10063)
Summary: TSAN test is slower, for `TransactionStressTest` and `DeadlockStress`, they're reaching the timeout limit of 600 seconds. Decreasing the transaction test number. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10063 Test Plan: CI Reviewed By: ajkr Differential Revision: D36711727 Pulled By: jay-zhuang fbshipit-source-id: 600f82a6d32108f52fbe5572fcc7497607b7fe98 |
2 years ago |
|
Yanqin Jin
|
514f0b0937 |
Fail DB::Open() if logger cannot be created (#9984)
Summary:
For regular db instance and secondary instance, we return error and refuse to open DB if Logger creation fails.
Our current code allows it, but it is really difficult to debug because
there will be no LOG files. The same for OPTIONS file, which will be explored in another PR.
Furthermore, Arena::AllocateAligned(size_t bytes, size_t huge_page_size, Logger* logger) has an
assertion as the following:
```cpp
#ifdef MAP_HUGETLB
if (huge_page_size > 0 && bytes > 0) {
assert(logger != nullptr);
}
#endif
```
It can be removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9984
Test Plan: make check
Reviewed By: jay-zhuang
Differential Revision: D36347754
Pulled By: riversand963
fbshipit-source-id: 529798c0511d2eaa2f0fd40cf7e61c4cbc6bc57e
|
2 years ago |
|
tagliavini
|
6c50082654 |
Remove code that only compiles for Visual Studio versions older than 2015 (#10065)
Summary: There are currently some preprocessor checks that assume support for Visual Studio versions older than 2015 (i.e., 0 < _MSC_VER < 1900), although we don't support them any more. We removed all code that only compiles on those older versions, except third-party/ files. The ROCKSDB_NOEXCEPT symbol is now obsolete, since it now always gets replaced by noexcept. We removed it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10065 Reviewed By: pdillinger Differential Revision: D36721901 Pulled By: guidotag fbshipit-source-id: a2892d365ef53cce44a0a7d90dd6b72ee9b5e5f2 |
2 years ago |
|
Levi Tamasi
|
af7ae912e2 |
Fix potential ambiguities in/around port/sys_time.h (#10045)
Summary:
There are some time-related POSIX APIs that are not available on Windows
(e.g. `localtime_r`), which we have worked around by providing our own
implementations in `port/sys_time.h`. This workaround actually relies on
some ambiguity: on Windows, a call to `localtime_r` calls
`ROCKSDB_NAMESPACE::port::localtime_r` (which is pulled into
`ROCKSDB_NAMESPACE` by a using-declaration), while on other platforms
it calls the global `localtime_r`. This works fine as long as there is only one
candidate function; however, it breaks down when there is more than one
`localtime_r` visible in a scope.
The patch fixes this by introducing `ROCKSDB_NAMESPACE::port::{TimeVal, GetTimeOfDay, LocalTimeR}`
to eliminate any ambiguity.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10045
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D36639372
Pulled By: ltamasi
fbshipit-source-id: fc13dbfa421b7c8918111a6d9e24ce77e91a7c50
|
2 years ago |
|
Changyu Bi
|
8515bd50c9 |
Support read rate-limiting in SequentialFileReader (#9973)
Summary: Added rate limiter and read rate-limiting support to SequentialFileReader. I've updated call sites to SequentialFileReader::Read with appropriate IO priority (or left a TODO and specified IO_TOTAL for now). The PR is separated into four commits: the first one added the rate-limiting support, but with some fixes in the unit test since the number of request bytes from rate limiter in SequentialFileReader are not accurate (there is overcharge at EOF). The second commit fixed this by allowing SequentialFileReader to check file size and determine how many bytes are left in the file to read. The third commit added benchmark related code. The fourth commit moved the logic of using file size to avoid overcharging the rate limiter into backup engine (the main user of SequentialFileReader). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9973 Test Plan: - `make check`, backup_engine_test covers usage of SequentialFileReader with rate limiter. - Run db_bench to check if rate limiting is throttling as expected: Verified that reads and writes are together throttled at 2MB/s, and at 0.2MB chunks that are 100ms apart. - Set up: `./db_bench --benchmarks=fillrandom -db=/dev/shm/test_rocksdb` - Benchmark: ``` strace -ttfe read,write ./db_bench --benchmarks=backup -db=/dev/shm/test_rocksdb --backup_rate_limit=2097152 --use_existing_db strace -ttfe read,write ./db_bench --benchmarks=restore -db=/dev/shm/test_rocksdb --restore_rate_limit=2097152 --use_existing_db ``` - db bench on backup and restore to ensure no performance regression. - backup (avg over 50 runs): pre-change: 1.90443e+06 micros/op; post-change: 1.8993e+06 micros/op (improve by 0.2%) - restore (avg over 50 runs): pre-change: 1.79105e+06 micros/op; post-change: 1.78192e+06 micros/op (improve by 0.5%) ``` # Set up ./db_bench --benchmarks=fillrandom -db=/tmp/test_rocksdb -num=10000000 # benchmark TEST_TMPDIR=/tmp/test_rocksdb NUM_RUN=50 for ((j=0;j<$NUM_RUN;j++)) do ./db_bench -db=$TEST_TMPDIR -num=10000000 -benchmarks=backup -use_existing_db | egrep 'backup' # Restore #./db_bench -db=$TEST_TMPDIR -num=10000000 -benchmarks=restore -use_existing_db done > rate_limit.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' rate_limit.txt >> rate_limit_2.txt ``` Reviewed By: hx235 Differential Revision: D36327418 Pulled By: cbi42 fbshipit-source-id: e75d4307cff815945482df5ba630c1e88d064691 |
2 years ago |
|
XieJiSS
|
8b1df101da |
fix: build on risc-v (#9215)
Summary:
Patch is modified from ~~https://reviews.llvm.org/file/data/du5ol5zctyqw53ma7dwz/PHID-FILE-knherxziu4tl4erti5ab/file~~
Tested on Arch Linux riscv64gc (qemu)
UPDATE: Seems like the above link is broken, so I tried to search for a link pointing to the original merge request. It turned out to me that the LLVM guys are cherry-picking from `google/benchmark`, and the upstream should be this:
|
2 years ago |
|
mrambacher
|
b11ff347b4 |
Use STATIC_AVOID_DESTRUCTION for static objects with non-trivial destructors (#9958)
Summary: Changed the static objects that had non-trivial destructors to use the STATIC_AVOID_DESTRUCTION construct. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9958 Reviewed By: pdillinger Differential Revision: D36442982 Pulled By: mrambacher fbshipit-source-id: 029d47b1374d30d198bfede369a4c0ae7a4eb519 |
2 years ago |
|
Hui Xiao
|
e66e6d2faa |
Use SpecialEnv to speed up some slow BackupEngineRateLimitingTestWithParam (#9974)
Summary: **Context:** `BackupEngineRateLimitingTestWithParam.RateLimiting` and `BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup` involve creating backup and restoring of a big database with rate-limiting. Using the normal env with a normal clock requires real elapse of time (13702 - 19848 ms/per test). As suggested in https://github.com/facebook/rocksdb/pull/8722#discussion_r703698603, this PR is to speed it up with SpecialEnv (`time_elapse_only_sleep=true`) where its clock accepts fake elapse of time during rate-limiting (100 - 600 ms/per test) **Summary:** - Added TEST_ function to set clock of the default rate limiters in backup engine - Shrunk testdb by 10 times while keeping it big enough for testing - Renamed some test variables and reorganized some if-else branch for clarity without changing the test Pull Request resolved: https://github.com/facebook/rocksdb/pull/9974 Test Plan: - Run tests pre/post PR the same time to verify the tests are sped up by 90 - 95% `BackupEngineRateLimitingTestWithParam.RateLimiting` Pre: ``` [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/0 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/0 (11123 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/1 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/1 (9441 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/2 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/2 (11096 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/3 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/3 (9339 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/4 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/4 (11121 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/5 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/5 (9413 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/6 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/6 (11185 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/7 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/7 (9511 ms) [----------] 8 tests from RateLimiting/BackupEngineRateLimitingTestWithParam (82230 ms total) ``` Post: ``` [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/0 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/0 (395 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/1 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/1 (564 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/2 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/2 (358 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/3 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/3 (567 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/4 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/4 (173 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/5 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/5 (176 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/6 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/6 (191 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/7 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/7 (177 ms) [----------] 8 tests from RateLimiting/BackupEngineRateLimitingTestWithParam (2601 ms total) ``` `BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup` Pre: ``` [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/0 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/0 (7275 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/1 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/1 (3961 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/2 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/2 (7117 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/3 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/3 (3921 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/4 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/4 (19862 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/5 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/5 (10231 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/6 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/6 (19848 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/7 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/7 (10372 ms) [----------] 8 tests from RateLimiting/BackupEngineRateLimitingTestWithParam (82587 ms total) ``` Post: ``` [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/0 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/0 (157 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/1 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/1 (152 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/2 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/2 (160 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/3 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/3 (158 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/4 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/4 (155 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/5 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/5 (151 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/6 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/6 (146 ms) [ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/7 [ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/7 (153 ms) [----------] 8 tests from RateLimiting/BackupEngineRateLimitingTestWithParam (1232 ms total) ``` Reviewed By: pdillinger Differential Revision: D36336345 Pulled By: hx235 fbshipit-source-id: 724c6ba745f95f56d4440a6d2f1e4512a2987589 |
2 years ago |
|
mrambacher
|
204a42ca97 |
Added GetFactoryCount/Names/Types to ObjectRegistry (#9358)
Summary: These methods allow for more thorough testing of the ObjectRegistry and Customizable infrastructure in a simpler manner. With this change, the Customizable tests can now check what factories are registered and attempt to create each of them in a systematic fashion. With this change, I think all of the factories registered with the ObjectRegistry/CreateFromString are now tested via the customizable_test classes. Note that there were a few other minor changes. There was a "posix://*" register with the ObjectRegistry which was missed during the PatternEntry conversion -- these changes found that. The nickname and default names for the FileSystem classes was also inverted. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9358 Reviewed By: pdillinger Differential Revision: D33433542 Pulled By: mrambacher fbshipit-source-id: 9a32da74e6620745b4eeffb2712be70eeeadfa7e |
2 years ago |
|
sdong
|
736a7b5433 |
Remove own ToString() (#9955)
Summary: ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString(). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955 Test Plan: Watch CI tests Reviewed By: riversand963 Differential Revision: D36176799 fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471 |
2 years ago |
|
Andrew Kryczka
|
a62506aee2 |
Enable unsynced data loss in crash test (#9947)
Summary:
`db_stress` already tracks expected state history to verify prefix-recoverability when `sync_fault_injection` is enabled. This PR enables `sync_fault_injection` in `db_crashtest.py`.
Previously enabling `sync_fault_injection` would cause whole unsynced files to be dropped. This PR adds a more interesting case of losing only the tail of unsynced data by implementing `TestFSWritableFile::RangeSync()` and enabling `{wal_,}bytes_per_sync`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9947
Test Plan:
- regular blackbox, blackbox --simple
- various commands to stress this new case, such as `TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox --max_key=100000 --write_buffer_size=2097152 --avoid_flush_during_recovery=1 --disable_wal=0 --interval=10 --db_write_buffer_size=0 --sync_fault_injection=1 --wal_compression=none --delpercent=0 --delrangepercent=0 --prefixpercent=0 --iterpercent=0 --writepercent=100 --readpercent=0 --wal_bytes_per_sync=131072 --duration=36000 --sync=0 --open_write_fault_one_in=16`
Reviewed By: riversand963
Differential Revision: D36152775
Pulled By: ajkr
fbshipit-source-id: 44b68a7fad0a4cf74af9fe1f39be01baab8141d8
|
2 years ago |
|
sdong
|
49628c9a83 |
Use std::numeric_limits<> (#9954)
Summary: Right now we still don't fully use std::numeric_limits but use a macro, mainly for supporting VS 2013. Right now we only support VS 2017 and up so it is not a problem. The code comment claims that MinGW still needs it. We don't have a CI running MinGW so it's hard to validate. since we now require C++17, it's hard to imagine MinGW would still build RocksDB but doesn't support std::numeric_limits<>. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9954 Test Plan: See CI Runs. Reviewed By: riversand963 Differential Revision: D36173954 fbshipit-source-id: a35a73af17cdcae20e258cdef57fcf29a50b49e0 |
2 years ago |
|
Yanqin Jin
|
2b5df21e95 |
Remove ifdef for try_emplace after upgrading to c++17 (#9932)
Summary: Test plan make check Pull Request resolved: https://github.com/facebook/rocksdb/pull/9932 Reviewed By: ajkr Differential Revision: D36085404 Pulled By: riversand963 fbshipit-source-id: 2ece14ca0e2e4c1288339ff79e7e126b76eaf786 |
2 years ago |
|
Yanqin Jin
|
2b5c29f9f3 |
Enforce the contract of SingleDelete (#9888)
Summary: Enforce the contract of SingleDelete so that they are not mixed with Delete for the same key. Otherwise, it will lead to undefined behavior. See https://github.com/facebook/rocksdb/wiki/Single-Delete#notes. Also fix unit tests and write-unprepared. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9888 Test Plan: make check Reviewed By: ajkr Differential Revision: D35837817 Pulled By: riversand963 fbshipit-source-id: acd06e4dcba8cb18df92b44ed18c57e10e5a7635 |
2 years ago |
|
Anvesh Komuravelli
|
aafb377bb5 |
Update protection info on recovered logs data (#9875)
Summary: Update protection info on recovered logs data Pull Request resolved: https://github.com/facebook/rocksdb/pull/9875 Test Plan: - Benchmark setup: `TEST_TMPDIR=/dev/shm/100MB_WAL_DB/ ./db_bench -benchmarks=fillrandom -write_buffer_size=1048576000` - Benchmark command: `TEST_TMPDIR=/dev/shm/100MB_WAL_DB/ /usr/bin/time ./db_bench -use_existing_db=true -benchmarks=overwrite -write_buffer_size=1048576000 -writes=1 -report_open_timing=true` - Results before this PR ``` OpenDb: 2350.14 milliseconds OpenDb: 2296.94 milliseconds OpenDb: 2184.29 milliseconds OpenDb: 2167.59 milliseconds OpenDb: 2231.24 milliseconds OpenDb: 2109.57 milliseconds OpenDb: 2197.71 milliseconds OpenDb: 2120.8 milliseconds OpenDb: 2148.12 milliseconds OpenDb: 2207.95 milliseconds ``` - Results after this PR ``` OpenDb: 2424.52 milliseconds OpenDb: 2359.84 milliseconds OpenDb: 2317.68 milliseconds OpenDb: 2339.4 milliseconds OpenDb: 2325.36 milliseconds OpenDb: 2321.06 milliseconds OpenDb: 2353.98 milliseconds OpenDb: 2344.64 milliseconds OpenDb: 2384.09 milliseconds OpenDb: 2428.58 milliseconds ``` Mean regressed 7.2% (2201.4 -> 2359.9) Reviewed By: ajkr Differential Revision: D36012787 Pulled By: akomurav fbshipit-source-id: d2aba09f29c6beb2fd0fe8e1e359be910b4ef02a |
2 years ago |
|
Yanqin Jin
|
94e245a14d |
Improve stress test for MultiOpsTxnsStressTest (#9829)
Summary: Adds more coverage to `MultiOpsTxnsStressTest` with a focus on write-prepared transactions. 1. Add a hack to manually evict commit cache entries. We currently cannot assign small values to `wp_commit_cache_bits` because it requires a prepared transaction to commit within a certain range of sequence numbers, otherwise it will throw. 2. Add coverage for commit-time-write-batch. If write policy is write-prepared, we need to set `use_only_the_last_commit_time_batch_for_recovery` to true. 3. After each flush/compaction, verify data consistency. This is possible since data size can be small: default numbers of primary/secondary keys are just 1000. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9829 Test Plan: ``` TEST_TMPDIR=/dev/shm/rocksdb_crashtest_blackbox/ make blackbox_crash_test_with_multiops_wp_txn ``` Reviewed By: pdillinger Differential Revision: D35806678 Pulled By: riversand963 fbshipit-source-id: d7fde7a29fda0fb481a61f553e0ca0c47da93616 |
2 years ago |
|
Herman Lee
|
d9d456de49 |
Fix locktree accesses to PessimisticTransactions (#9898)
Summary: The current locktree implementation stores the address of the PessimisticTransactions object as the TXNID. However, when a transaction is blocked on a lock, it records the list of waitees with conflicting locks using the rocksdb assigned TransactionID. This is performed by calling GetID() on PessimisticTransactions objects of the waitees, and then recorded in the waiter's list. However, there is no guarantee the objects are valid when recording the waitee list during the conflict callbacks because the waitee could have released the lock and freed the PessimisticTransactions object. The waitee/txnid values are only valid PessimisticTransaction objects while the mutex for the root of the locktree is held. The simplest fix for this problem is to use the address of the PessimisticTransaction as the TransactionID so that it is consistent with its usage in the locktree. The TXNID is only converted back to a PessimisticTransaction for the report_wait callbacks. Since these callbacks are now all made within the critical section where the lock_request queue mutx is held, these conversions will be safe. Otherwise, only the uint64_t TXNID of the waitee is registerd with the waiter transaction. The PessimisitcTransaction object of the waitee is never referenced. The main downside of this approach is the TransactionID will not change if the PessimisticTransaction object is reused for new transactions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9898 Test Plan: Add a new test case and run unit tests. Also verified with MyRocks workloads using range locks that the crash no longer happens. Reviewed By: riversand963 Differential Revision: D35950376 Pulled By: hermanlee fbshipit-source-id: 8c9cae272e23e487fc139b6a8ed5b8f8f24b1570 |
2 years ago |
|
Yanqin Jin
|
d13825e586 |
Add rollback_deletion_type_callback to TxnDBOptions (#9873)
Summary:
This PR does not affect write-committed.
Add a member, `rollback_deletion_type_callback` to TransactionDBOptions
so that a write-prepared transaction, when rolling back, can call this
callback to decide if a `Delete` or `SingleDelete` should be used to
cancel a prior `Put` written to the database during prepare phase.
The purpose of this PR is to prevent mixing `Delete` and `SingleDelete`
for the same key, causing undefined behaviors. Without this PR, the
following can happen:
```
// The application always issues SingleDelete when deleting keys.
txn1->Put('a');
txn1->Prepare(); // writes to memtable and potentially gets flushed/compacted to Lmax
txn1->Rollback(); // inserts DELETE('a')
txn2->Put('a');
txn2->Commit(); // writes to memtable and potentially gets flushed/compacted
```
In the database, we may have
```
L0: [PUT('a', s=100)]
L1: [DELETE('a', s=90)]
Lmax: [PUT('a', s=0)]
```
If a compaction compacts L0 and L1, then we have
```
L1: [PUT('a', s=100)]
Lmax: [PUT('a', s=0)]
```
If a future transaction issues a SingleDelete, we have
```
L0: [SD('a', s=110)]
L1: [PUT('a', s=100)]
Lmax: [PUT('a', s=0)]
```
Then, a compaction including L0, L1 and Lmax leads to
```
Lmax: [PUT('a', s=0)]
```
which is incorrect.
Similar bugs reported and addressed in
https://github.com/cockroachdb/pebble/issues/1255. Based on our team's
current priority, we have decided to take this approach for now. We may
come back and revisit in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9873
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D35762170
Pulled By: riversand963
fbshipit-source-id: b28d56eefc786b53c9844b9ef4a7807acdd82c8d
|
2 years ago |
|
sdong
|
4f9c0fd083 |
Add Aggregation Merge Operator (#9780)
Summary: Add a merge operator that allows users to register specific aggregation function so that they can does aggregation based per key using different aggregation types. See comments of function CreateAggMergeOperator() for actual usage. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9780 Test Plan: Add a unit test to coverage various cases. Reviewed By: ltamasi Differential Revision: D35267444 fbshipit-source-id: 5b02f31c4f3e17e96dd4025cdc49fca8c2868628 |
2 years ago |
|
Levi Tamasi
|
db536ee045 |
Propagate errors from UpdateBoundaries (#9851)
Summary: In `FileMetaData`, we keep track of the lowest-numbered blob file referenced by the SST file in question for the purposes of BlobDB's garbage collection in the `oldest_blob_file_number` field, which is updated in `UpdateBoundaries`. However, with the current code, `BlobIndex` decoding errors (or invalid blob file numbers) are swallowed in this method. The patch changes this by propagating these errors and failing the corresponding flush/compaction. (Note that since blob references are generated by the BlobDB code and also parsed by `CompactionIterator`, in reality this can only happen in the case of memory corruption.) This change necessitated updating some unit tests that involved fake/corrupt `BlobIndex` objects. Some of these just used a dummy string like `"blob_index"` as a placeholder; these were replaced with real `BlobIndex`es. Some were relying on the earlier behavior to simulate corruption; these were replaced with `SyncPoint`-based test code that corrupts a valid blob reference at read time. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9851 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D35683671 Pulled By: ltamasi fbshipit-source-id: f7387af9945c48e4d5c4cd864f1ba425c7ad51f6 |
2 years ago |
|
Peter Dillinger
|
efd035164b |
Meta-internal folly integration with F14FastMap (#9546)
Summary: Especially after updating to C++17, I don't see a compelling case for *requiring* any folly components in RocksDB. I was able to purge the existing hard dependencies, and it can be quite difficult to strip out non-trivial components from folly for use in RocksDB. (The prospect of doing that on F14 has changed my mind on the best approach here.) But this change creates an optional integration where we can plug in components from folly at compile time, starting here with F14FastMap to replace std::unordered_map when possible (probably no public APIs for example). I have replaced the biggest CPU users of std::unordered_map with compile-time pluggable UnorderedMap which will use F14FastMap when USE_FOLLY is set. USE_FOLLY is always set in the Meta-internal buck build, and a simulation of that is in the Makefile for public CI testing. A full folly build is not needed, but checking out the full folly repo is much simpler for getting the dependency, and anything else we might want to optionally integrate in the future. Some picky details: * I don't think the distributed mutex stuff is actually used, so it was easy to remove. * I implemented an alternative to `folly::constexpr_log2` (which is much easier in C++17 than C++11) so that I could pull out the hard dependencies on `ConstexprMath.h` * I had to add noexcept move constructors/operators to some types to make F14's complainUnlessNothrowMoveAndDestroy check happy, and I added a macro to make that easier in some common cases. * Updated Meta-internal buck build to use folly F14Map (always) No updates to HISTORY.md nor INSTALL.md as this is not (yet?) considered a production integration for open source users. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9546 Test Plan: CircleCI tests updated so that a couple of them use folly. Most internal unit & stress/crash tests updated to use Meta-internal latest folly. (Note: they should probably use buck but they currently use Makefile.) Example performance improvement: when filter partitions are pinned in cache, they are tracked by PartitionedFilterBlockReader::filter_map_ and we can build a test that exercises that heavily. Build DB with ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters ``` and test with (simultaneous runs with & without folly, ~20 times each to see convergence) ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench_folly -readonly -use_existing_db -benchmarks=readrandom -num=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters -duration=40 -pin_l0_filter_and_index_blocks_in_cache ``` Average ops/s no folly: 26229.2 Average ops/s with folly: 26853.3 (+2.4%) Reviewed By: ajkr Differential Revision: D34181736 Pulled By: pdillinger fbshipit-source-id: ffa6ad5104c2880321d8a1aa7187e00ab0d02e94 |
2 years ago |
|
mrambacher
|
b7db7eae26 |
Plugin Registry (#7949)
Summary: Added a Plugin class to the ObjectRegistry. Enabled compile-time and program-time addition of plugins to the Registry. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7949 Reviewed By: mrambacher Differential Revision: D33517674 Pulled By: pdillinger fbshipit-source-id: c3e3270aab76a489bfa9e85d78cdfca951912557 |
2 years ago |
|
gitbw95
|
f241d082b6 |
Prevent double caching in the compressed secondary cache (#9747)
Summary: ### **Summary:** When both LRU Cache and CompressedSecondaryCache are configured together, there possibly are some data blocks double cached. **Changes include:** 1. Update IS_PROMOTED to IS_IN_SECONDARY_CACHE to prevent confusions. 2. This PR updates SecondaryCacheResultHandle and use IsErasedFromSecondaryCache to determine whether the handle is erased in the secondary cache. Then, the caller can determine whether to SetIsInSecondaryCache(). 3. Rename LRUSecondaryCache to CompressedSecondaryCache. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9747 Test Plan: **Test Scripts:** 1. Populate a DB. The on disk footprint is 482 MB. The data is set to be 50% compressible, so the total decompressed size is expected to be 964 MB. ./db_bench --benchmarks=fillrandom --num=10000000 -db=/db_bench_1 2. overwrite it to a stable state: ./db_bench --benchmarks=overwrite,stats --num=10000000 -use_existing_db -duration=10 --benchmark_write_rate_limit=2000000 -db=/db_bench_1 4. Run read tests with diffeernt cache setting: T1: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=520000000 --statistics -db=/db_bench_1 T2: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=320000000 -compressed_secondary_cache_size=400000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 T3: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=520000000 -compressed_secondary_cache_size=400000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 T4: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=20000000 -compressed_secondary_cache_size=500000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 **Before this PR** | Cache Size | Compressed Secondary Cache Size | Cache Hit Rate | |------------|-------------------------------------|----------------| |520 MB | 0 MB | 85.5% | |320 MB | 400 MB | 96.2% | |520 MB | 400 MB | 98.3% | |20 MB | 500 MB | 98.8% | **Before this PR** | Cache Size | Compressed Secondary Cache Size | Cache Hit Rate | |------------|-------------------------------------|----------------| |520 MB | 0 MB | 85.5% | |320 MB | 400 MB | 99.9% | |520 MB | 400 MB | 99.9% | |20 MB | 500 MB | 99.2% | Reviewed By: anand1976 Differential Revision: D35117499 Pulled By: gitbw95 fbshipit-source-id: ea2657749fc13efebe91a8a1b56bc61d6a224a12 |
2 years ago |
|
Yanqin Jin
|
1a1c5bda23 |
Disallow commit-time-batch for write-prepared/write-unprepared txn conditionally (#9794)
Summary: For write-prepared/write-unprepared transactions, GetCommitTimeWriteBatch() can be used only if the transaction is started with `TransactionOptions::use_only_the_last_commit_time_batch_for_recovery` set to true. Otherwise, it is possible that multiple uncommitted versions of the same key exist in the database. During bottommost compaction, RocksDB may set the sequence numbers of both to zero once they become committed, causing output SST file to have two identical internal keys. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9794 Test Plan: make check pay special attention to the following ``` transaction_test --gtest_filter=MySQLStyleTransactionTest/MySQLStyleTransactionTest.TransactionStressTest/* ``` Reviewed By: lth Differential Revision: D35327214 Pulled By: riversand963 fbshipit-source-id: 3bae00a28359c10e96e4c6f676d20de5610d8a0f |
2 years ago |
|
Peter Dillinger
|
6534c6dea4 |
Fix remaining uses of "backupable" (#9792)
Summary: Various renaming and fixes to get rid of remaining uses of "backupable" which is terminology leftover from the original, flawed design of BackupableDB. Now any DB can be backed up, using BackupEngine. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9792 Test Plan: CI Reviewed By: ajkr Differential Revision: D35334386 Pulled By: pdillinger fbshipit-source-id: 2108a42b4575c8cccdfd791c549aae93ec2f3329 |
2 years ago |
|
Chen Lixiang
|
cd59b139fc |
Fix some typos in comments and HISTORY.md (#9798)
Summary: compation --> compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/9798 Reviewed By: ajkr Differential Revision: D35341611 Pulled By: jay-zhuang fbshipit-source-id: 5ea07527c311de75cade219456b6ee52b23020f6 |
2 years ago |
|
Peter Dillinger
|
40e3f30a28 |
Fix FileStorageInfo fields from GetLiveFilesMetaData (#9769)
Summary: In making `SstFileMetaData` inherit from `FileStorageInfo`, I overlooked setting some `FileStorageInfo` fields when then default `SstFileMetaData()` ctor is used. This affected `GetLiveFilesMetaData()`. Also removed some buggy `static_cast<size_t>` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9769 Test Plan: Updated tests Reviewed By: jay-zhuang Differential Revision: D35220383 Pulled By: pdillinger fbshipit-source-id: 05b4ee468258dbd3699517e1124838bf405fe7f8 |
2 years ago |
|
gitbw95
|
8102690a52 |
Update Cache::Release param from force_erase to erase_if_last_ref (#9728)
Summary: The param name force_erase may be misleading, since the handle is erased only if it has last reference even if the param is set true. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9728 Reviewed By: pdillinger Differential Revision: D35038673 Pulled By: gitbw95 fbshipit-source-id: 0d16d1e8fed17b97eba7fb53207119332f659a5f |
2 years ago |
|
Peter Dillinger
|
cff0d1e8e6 |
New backup meta schema, with file temperatures (#9660)
Summary: The primary goal of this change is to add support for backing up and restoring (applying on restore) file temperature metadata, without committing to either the DB manifest or the FS reported "current" temperatures being exclusive "source of truth". To achieve this goal, we need to add temperature information to backup metadata, which requires updated backup meta schema. Fortunately I prepared for this in https://github.com/facebook/rocksdb/issues/8069, which began forward compatibility in version 6.19.0 for this kind of schema update. (Previously, backup meta schema was not extensible! Making this schema update public will allow some other "nice to have" features like taking backups with hard links, and avoiding crc32c checksum computation when another checksum is already available.) While schema version 2 is newly public, the default schema version is still 1. Until we change the default, users will need to set to 2 to enable features like temperature data backup+restore. New metadata like temperature information will be ignored with a warning in versions before this change and since 6.19.0. The metadata is considered ignorable because a functioning DB can be restored without it. Some detail: * Some renaming because "future schema" is now just public schema 2. * Initialize some atomics in TestFs (linter reported) * Add temperature hint support to SstFileDumper (used by BackupEngine) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9660 Test Plan: related unit test majorly updated for the new functionality, including some shared testing support for tracking temperatures in a FS. Some other tests and testing hooks into production code also updated for making the backup meta schema change public. Reviewed By: ajkr Differential Revision: D34686968 Pulled By: pdillinger fbshipit-source-id: 3ac1fa3e67ee97ca8a5103d79cc87d872c1d862a |
2 years ago |
|
Yanqin Jin
|
565fcead22 |
Fix clang-analyze by adding assertion (#9682)
Summary: Clang-analyze complains about potential nullptr dereference. Fix by adding an assertion to make clang happy. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9682 Test Plan: USE_CLANG=1 make -j20 analyze_incremental Reviewed By: ltamasi Differential Revision: D34755210 Pulled By: riversand963 fbshipit-source-id: 948e1899846ee1aa05a1b500a11ff43b0b412e0a |
2 years ago |
|
Yanqin Jin
|
3b6dc049f7 |
Support user-defined timestamps in write-committed txns (#9629)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9629 Pessimistic transactions use pessimistic concurrency control, i.e. locking. Keys are locked upon first operation that writes the key or has the intention of writing. For example, `PessimisticTransaction::Put()`, `PessimisticTransaction::Delete()`, `PessimisticTransaction::SingleDelete()` will write to or delete a key, while `PessimisticTransaction::GetForUpdate()` is used by application to indicate to RocksDB that the transaction has the intention of performing write operation later in the same transaction. Pessimistic transactions support two-phase commit (2PC). A transaction can be `Prepared()`'ed and then `Commit()`. The prepare phase is similar to a promise: once `Prepare()` succeeds, the transaction has acquired the necessary resources to commit. The resources include locks, persistence of WAL, etc. Write-committed transaction is the default pessimistic transaction implementation. In RocksDB write-committed transaction, `Prepare()` will write data to the WAL as a prepare section. `Commit()` will write a commit marker to the WAL and then write data to the memtables. While writing to the memtables, different keys in the transaction's write batch will be assigned different sequence numbers in ascending order. Until commit/rollback, the transaction holds locks on the keys so that no other transaction can write to the same keys. Furthermore, the keys' sequence numbers represent the order in which they are committed and should be made visible. This is convenient for us to implement support for user-defined timestamps. Since column families with and without timestamps can co-exist in the same database, a transaction may or may not involve timestamps. Based on this observation, we add two optional members to each `PessimisticTransaction`, `read_timestamp_` and `commit_timestamp_`. If no key in the transaction's write batch has timestamp, then setting these two variables do not have any effect. For the rest of this commit, we discuss only the cases when these two variables are meaningful. read_timestamp_ is used mainly for validation, and should be set before first call to `GetForUpdate()`. Otherwise, the latter will return non-ok status. `GetForUpdate()` calls `TryLock()` that can verify if another transaction has written the same key since `read_timestamp_` till this call to `GetForUpdate()`. If another transaction has indeed written the same key, then validation fails, and RocksDB allows this transaction to refine `read_timestamp_` by increasing it. Note that a transaction can still use `Get()` with a different timestamp to read, but the result of the read should not be used to determine data that will be written later. commit_timestamp_ must be set after finishing writing and before transaction commit. This applies to both 2PC and non-2PC cases. In the case of 2PC, it's usually set after prepare phase succeeds. We currently require that the commit timestamp be chosen after all keys are locked. This means we disallow the `TransactionDB`-level APIs if user-defined timestamp is used by the transaction. Specifically, calling `PessimisticTransactionDB::Put()`, `PessimisticTransactionDB::Delete()`, `PessimisticTransactionDB::SingleDelete()`, etc. will return non-ok status because they specify timestamps before locking the keys. Users are also prompted to use the `Transaction` APIs when they receive the non-ok status. Reviewed By: ltamasi Differential Revision: D31822445 fbshipit-source-id: b82abf8e230216dc89cc519564a588224a88fd43 |
2 years ago |