Summary: There were a few narrowing conversions that clang didn't like.
Test Plan:
$ make clean && USE_CLANG=1 DISABLE_JEMALLOC=1 TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make -j32 check
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57351
Summary:
This adds a new metablock containing a shared dictionary that is used
to compress all data blocks in the SST file. The size of the shared dictionary
is configurable in CompressionOptions and defaults to 0. It's currently only
used for zlib/lz4/lz4hc, but the block will be stored in the SST regardless of
the compression type if the user chooses a nonzero dictionary size.
During compaction, computes the dictionary by randomly sampling the first
output file in each subcompaction. It pre-computes the intervals to sample
by assuming the output file will have the maximum allowable length. In case
the file is smaller, some of the pre-computed sampling intervals can be beyond
end-of-file, in which case we skip over those samples and the dictionary will
be a bit smaller. After the dictionary is generated using the first file in a
subcompaction, it is loaded into the compression library before writing each
block in each subsequent file of that subcompaction.
On the read path, gets the dictionary from the metablock, if it exists. Then,
loads that dictionary into the compression library before reading each block.
Test Plan: new unit test
Reviewers: yhchiang, IslamAbdelRahman, cyan, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52287
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
Test Plan:
'export TEST_TMPDIR=/dev/shm/ && DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32' is OK.
I didn't run the Java tests, I don't have Java set up on my devserver.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56133
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
When the table reader is destroyed, it releases the pinned blocks (if there were any). This has to happen before the cache is destroyed, so I had to introduce a TableReader::Close(), to guarantee the order of destruction.
Test Plan:
Added two unit tests for this. Existing unit tests run fine (default is pin_l0_filter_and_index_blocks_in_cache=false).
DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32
Mac: OK.
Linux: with D55287 patched in it's OK.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54801
Summary:
When we first started, max_background_flushes was 0 by default and compaction thread was executing flushes (since there was no flush thread). Then, we switched the default max_background_flushes to 1. However, we still support the case where there is no flush thread and flushes are done in compaction. This is making our code a bit more complicated. By not supporting this use-case we can make our code simpler.
We have a special case that when you set max_background_flushes to 0, we
schedule the flush to execute on the compaction thread.
Test Plan: make check (there might be some unit tests that depend on this behavior)
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41931
Summary: It has been around for a while and it looks like it never found any uses in the wild. It's also complicating our compaction_job code quite a bit. We're deprecating it in 3.13, but will put it back in 3.14 if we actually find users that need this feature.
Test Plan: make check
Reviewers: noetzli, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42405
Summary: Moved convenience.h out of utilities to remove a dependency on utilities in db.
Test Plan: unit tests. Also compiled a link to the old location to verify the _Pragma works.
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42201
Summary: This option is guarding the feature implemented 2 and a half years ago: D8991. The feature was enabled by default back then and has been running without issues. There is no reason why any client would turn this feature off. I found no reference in fbcode.
Test Plan: none
Reviewers: sdong, yhchiang, anthony, dhruba
Reviewed By: dhruba
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42063
Summary: This helps Windows port to format their changes, as discussed. Might have formatted some other codes too becasue last 10 commits include more.
Test Plan: Build it.
Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D41961
Summary: Make RocksDb build and run on Windows to be functionally
complete and performant. All existing test cases run with no
regressions. Performance numbers are in the pull-request.
Test plan: make all of the existing unit tests pass, obtain perf numbers.
Co-authored-by: Praveen Rao praveensinghrao@outlook.com
Co-authored-by: Sherlock Huang baihan.huang@gmail.com
Co-authored-by: Alex Zinoviev alexander.zinoviev@me.com
Co-authored-by: Dmitri Smirnov dmitrism@microsoft.com
Summary:
This diff update DB::CompactRange to use RangeCompactionOptions instead of using multiple parameters
Old CompactRange is still available but deprecated
Test Plan:
make all check
make rocksdbjava
USE_CLANG=1 make all
OPT=-DROCKSDB_LITE make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40209
Summary: Block c_test in ROCKSDB_LITE as it's not supported in ROCKSDB_LITE.
Test Plan: c_test
Reviewers: sdong, rven, anthony, kradhakrishnan, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40257
Summary:
For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit.
After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much.
This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit).
However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions.
Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here.
Reviewers: sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37443
Summary: It is no longer used by the implementation, so we should also remove it from the public API.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34971
Summary:
When using latest clang (3.6 or 3.7/trunck) rocksdb is failing with many errors. Almost all of them are missing override errors. This diff adds missing override keyword. No manual changes.
Prerequisites: bear and clang 3.5 build with extra tools
```lang=bash
% USE_CLANG=1 bear make all # generate a compilation database http://clang.llvm.org/docs/JSONCompilationDatabase.html
% clang-modernize -p . -include . -add-override
% make format
```
Test Plan:
Make sure all tests are passing.
```lang=bash
% #Use default fb code clang.
% make check
```
Verify less error and no missing override errors.
```lang=bash
% # Have trunk clang present in path.
% ROCKSDB_NO_FBCODE=1 CC=clang CXX=clang++ make
```
Reviewers: igor, kradhakrishnan, rven, meyering, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34077
Summary:
The "const" attribute does not make sense on a return type,
and provokes a warning/error from gcc -W -Wextra.
Test Plan:
Run "make EXTRA_CXXFLAGS='-W -Wextra'" and see fewer errors.
Reviewers: ljin, sdong, igor.sugak, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33759
Summary:
Introduces a new class for managing write buffer memory across column
families. We supplement ColumnFamilyOptions::write_buffer_size with
ColumnFamilyOptions::write_buffer, a shared pointer to a WriteBuffer
instance that enforces memory limits before flushing out to disk.
Test Plan: Added SharedWriteBuffer unit test to db_test.cc
Reviewers: sdong, rven, ljin, igor
Reviewed By: igor
Subscribers: tnovak, yhchiang, dhruba, xjin, MarkCallaghan, yoshinorim
Differential Revision: https://reviews.facebook.net/D22581
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
Summary:
1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file.
2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter.
3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type.
4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h.
5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc
Benchmark: base commit 1d23b5c470
Command:
db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1
Read QPS increase for about 30% from 2230002 to 2991411.
Test Plan:
make all check
valgrind db_test
db_stress --use_block_based_filter = 0
./auto_sanity_test.sh
Reviewers: igor, yhchiang, ljin, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20979
Summary: also fix HISTORY.md
Test Plan: make all check
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22437
Summary:
I will move compression related options in a separate diff since this
diff is already pretty lengthy.
I guess I will also need to change JNI accordingly :(
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21915
siddontang