Summary:
The compaction process deletes a large number of files. This takes
quite a bit of time and is best done outside the mutex lock.
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D6123
Summary:
The compaction process deletes a large number of files. This takes
quite a bit of time and is best done outside the mutex lock.
Test Plan:
Reviewers:
CC:
Task ID: #
Blame Rev:
Summary:
Leveldb code already calculates checksums for each block. There
is no need to generate checksums inside zlib. This patch switches-off checksum generation/checking in zlib library.
(The Inno support for zlib uses windowsBits=14 as well.)
pfabricator marks this file as binary. But here is the diff
diff --git a/port/port_posix.h b/port/port_posix.h
index 86a0927..db4e0b8 100644
--- a/port/port_posix.h
+++ b/port/port_posix.h
@@ -163,7 +163,7 @@ inline bool Snappy_Uncompress(const char* input, size_t length,
}
inline bool Zlib_Compress(const char* input, size_t length,
- ::std::string* output, int windowBits = 15, int level = -1,
+ ::std::string* output, int windowBits = -14, int level = -1,
int strategy = 0) {
#ifdef ZLIB
// The memLevel parameter specifies how much memory should be allocated for
@@ -223,7 +223,7 @@ inline bool Zlib_Compress(const char* input, size_t length,
}
inline char* Zlib_Uncompress(const char* input_data, size_t input_length,
- int* decompress_size, int windowBits = 15) {
+ int* decompress_size, int windowBits = -14) {
#ifdef ZLIB
z_stream _stream;
memset(&_stream, 0, sizeof(z_stream));
Test Plan: run db_bench with zlib compression.
Reviewers: heyongqiang, MarkCallaghan
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D6105
Summary:
The parameter delete_obsolete_files_period_micros controls the
periodicity of deleting obsolete files. db_bench was reading in
this parameter intoa local variable called 'l' but was incorrectly
using another local variable called 'n' while setting it in the
db.options data structure.
This patch also logs the value of delete_obsolete_files_period_micros
in the LOG file at db startup time.
I am hoping that this will improve the overall write throughput drastically.
Test Plan: run db_bench
Reviewers: MarkCallaghan, heyongqiang
Reviewed By: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6099
published in https://reviews.facebook.net/D5997.
Summary:
This patch allows compaction to occur in multiple background threads
concurrently.
If a manual compaction is issued, the system falls back to a
single-compaction-thread model. This is done to ensure correctess
and simplicity of code. When the manual compaction is finished,
the system resumes its concurrent-compaction mode automatically.
The updates to the manifest are done via group-commit approach.
Test Plan: run db_bench
Summary:
fbcode build now support SSE instructions.
Delete older version of the compile-helper fbcode.sh. This is
subsumed by fbcode.gcc471.sh.
Test Plan: run make check
Reviewers: heyongqiang, MarkCallaghan
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D6057
Summary:
The method DeleteObsolete files is a very costly methind, especially
when the number of files in a system is large. It makes a list of
all live-files and then scans the directory to compute the diff.
By default, this method is executed after every compaction run.
This patch makes it such that DeleteObsolete files is never
invoked twice within a configured period.
Test Plan: run all unit tests
Reviewers: heyongqiang, MarkCallaghan
Reviewed By: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6045
Summary: Enhance db_bench to allow setting the number of levels in a database.
Test Plan: run db_bench and look at LOG
Reviewers: heyongqiang, MarkCallaghan
Reviewed By: MarkCallaghan
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6027
Summary:
Created a tool that runs multiple threads that concurrently read and write to levelDB.
All writes to the DB are stored in an in-memory hashtable and verified at the end of the
test. All writes for a given key are serialzied.
Test Plan:
- Verified by writing only a few keys and logging all writes and verifying that values read and written are correct.
- Verified correctness of value generator.
- Ran with various parameters of number of keys, locks, and threads.
Reviewers: dhruba, MarkCallaghan, heyongqiang
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D5829
Summary: This implement the Java interface by using JNI
Test Plan: compile test
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D5925
Summary:
Each assoc is identified by (id1, assocType). This is the rowkey.
Each row has a read/write rowlock. There is statically allocated array
of 2000 read/write locks. A rowkey is murmur-hashed to one of the
read/write locks.
assocPut and assocDelete acquires the rowlock in Write mode.
The key-updates are done within the rowlock with a atomic nosync
batch write to leveldb. Then the rowlock is released and
a write-with-sync is done to sync leveldb transaction log.
Test Plan: added unit test
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5859
Summary:
We have seen that reading data via the pread call (instead of
mmap) is much faster on Linux 2.6.x kernels. This patch makes
an equivalent option to switch off mmaps for the write path
as well.
db_bench --mmap_write=0 will use write() instead of mmap() to
write data to a file.
This change is backward compatible, the default
option is to continue using mmap for writing to a file.
Test Plan: "make check all"
Differential Revision: https://reviews.facebook.net/D5781
Summary:
The option is zero by default and in that case reporting is unchanged.
By unchanged, the interval at which stats are reported is scaled after each
report and newline is not issued after each report so one line is rewritten.
When non-zero it specifies the constant interval (in operations) at which
statistics are reported and the stats include the rate per interval. This
makes it easier to determine whether QPS changes over the duration of the test.
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
CC: heyongqiang
Differential Revision: https://reviews.facebook.net/D5817
Summary:
Implement ReadWrite locks for leveldb. These will be helpful
to implement a read-modify-write operation (e.g. atomic increments).
Test Plan: does not modify any existing code
Reviewers: heyongqiang
Reviewed By: heyongqiang
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D5787
Summary:
A simple CLI which calles DB->CompactRange()
Can take String key's as range.
Test Plan:
Inserted data into a table.
Waited for a minute, used compact tool on it. File modification time's
changed so Compact did something on the files.
Existing unit tests work.
Reviewers: heyongqiang, dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D5697
Summary: Print the block cache size in the LOG.
Test Plan: run db_bench and look at LOG. This is helpful while I was debugging one use-case.
Reviewers: heyongqiang, MarkCallaghan
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5739
Summary:
In the current code, a Get() call can trigger compaction if it has to look at more than one file. This causes unnecessary compaction because looking at more than one file is a penalty only if the file is not yet in the cache. Also, th current code counts these files before the bloom filter check is applied.
This patch counts a 'seek' only if the file fails the bloom filter
check and has to read in data block(s) from the storage.
This patch also counts a 'seek' if a file is not present in the file-cache, because opening a file means that its index blocks need to be read into cache.
Test Plan: unit test attached. I will probably add one more unti tests.
Reviewers: heyongqiang
Reviewed By: heyongqiang
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D5709
Summary:
Create a tool to iterate through keys and dump values. Current options
as follows:
db_dump --start=[START_KEY] --end=[END_KEY] --max_keys=[NUM] --stats
[PATH]
START_KEY: First key to start at
END_KEY: Key to end at (not inclusive)
NUM: Maximum number of keys to dump
PATH: Path to leveldb DB
The --stats command line argument prints out the DB stats before dumping
the keys.
Test Plan:
- Tested with invalid args
- Tested with invalid path
- Used empty DB
- Used filled DB
- Tried various permutations of command line options
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D5643
Summary:
If ReadCompaction is switched off, then it is better to not even
submit background compaction jobs. I see about 3% increase in
read-throughput on a pure memory database.
Test Plan: run db_bench
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5673
Summary:
The GetLiveFiles() api lists the set of sst files and the current
MANIFEST file. But the database continues to append new data to the
MANIFEST file even when the application is backing it up to the
backup location. This means that the database-version that is
stored in the MANIFEST FILE in the backup location
does not correspond to the sst files returned by GetLiveFiles.
This API adds a new parameter to GetLiveFiles. This new parmeter
returns the current size of the MANIFEST file.
Test Plan: Unit test attached.
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5631
Summary:
Keeping symbols in the binary increases the size of the library but makes
it easier to debug. The optimization level is still -O2, so this should
have no impact on performance.
Test Plan: make all
Reviewers: heyongqiang, MarkCallaghan
Reviewed By: MarkCallaghan
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D5601
Summary:
The background threads are necessary for compaction.
For slower storage, it might be necessary to have more than
one compaction thread per DB. This patch allows creating
a configurable number of worker threads.
The default reamins at 1 (to maintain backward compatibility).
Test Plan:
run all unit tests. changes to db-bench coming in
a separate patch.
Reviewers: heyongqiang
Reviewed By: heyongqiang
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D5559
Summary: Print out the compile version in the LOG.
Test Plan: run dbbench and verify LOG
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5529
Summary: Use correct version of jemalloc.
Test Plan: run unit tests
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5487
Summary:
as subject. This diff should be good for benchmarking.
will send another diff to make it better in the case the seek compaction is enable.
In that coming diff, will not count a seek if the bloomfilter filters.
Test Plan: build
Reviewers: dhruba, MarkCallaghan
Reviewed By: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D5481
Summary:
A set of apis that allows an application to backup data from the
leveldb database based on a set of files.
Test Plan: unint test attached. more coming soon.
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5439
Summary:
as subject. this can be used for benchmarking.
If we want it for some cases, we can do more changes to make this part of the option.
Test Plan: db_test
Reviewers: dhruba
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D5451
Summary:
Reads via mmap on concurrent workloads are much slower than pread.
For example on a 24-core server with storage that can do 100k IOPS or more
I can get no more than 10k IOPS with mmap reads and 32+ threads.
Test Plan: db_bench benchmarks
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5433
Summary:
FLAGS_cache_size is a long, no need to scan %lld into a size_t
for it (which generates a compiler warning)
Test Plan: run db_bench
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: heyongqiang
Differential Revision: https://reviews.facebook.net/D5427
Summary:
This adds an option to db_bench to specify the compression algorithm to
use for LevelDB
Test Plan: ran db_bench
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D5421
Summary:
Ability to switch off filesystem read-aheads. This change is
backward-compatible: the default setting is to allow file
system read-aheads.
Test Plan: run benchmarks
Reviewers: heyongqiang, adsharma
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5391
Summary:
When posix_fadvise(offset, offset) is usedm it frees up only those
pages in that specified range. But the filesystem could have done some
read-aheads and those get cached in the OS cache.
Do not cache readahead-pages in the OS cache.
Test Plan: run db_bench benchmark.
Reviewers: vamsi, heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5379
Summary: Enable db_bench to specify block size.
Test Plan: compile and run
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5373
Dhruba Borthakur