Summary:
In `FileMetaData`, we keep track of the lowest-numbered blob file
referenced by the SST file in question for the purposes of BlobDB's
garbage collection in the `oldest_blob_file_number` field, which is
updated in `UpdateBoundaries`. However, with the current code,
`BlobIndex` decoding errors (or invalid blob file numbers) are swallowed
in this method. The patch changes this by propagating these errors
and failing the corresponding flush/compaction. (Note that since blob
references are generated by the BlobDB code and also parsed by
`CompactionIterator`, in reality this can only happen in the case of
memory corruption.)
This change necessitated updating some unit tests that involved
fake/corrupt `BlobIndex` objects. Some of these just used a dummy string like
`"blob_index"` as a placeholder; these were replaced with real `BlobIndex`es.
Some were relying on the earlier behavior to simulate corruption; these
were replaced with `SyncPoint`-based test code that corrupts a valid
blob reference at read time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9851
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D35683671
Pulled By: ltamasi
fbshipit-source-id: f7387af9945c48e4d5c4cd864f1ba425c7ad51f6
Summary:
**This PR does not affect the functionality of `DB` and write-committed transactions.**
`CompactionIterator` uses `KeyCommitted(seq)` to determine if a key in the database is committed.
As the name 'write-committed' implies, if write-committed policy is used, a key exists in the database only if
it is committed. In fact, the implementation of `KeyCommitted()` is as follows:
```
inline bool KeyCommitted(SequenceNumber seq) {
// For non-txn-db and write-committed, snapshot_checker_ is always nullptr.
return snapshot_checker_ == nullptr ||
snapshot_checker_->CheckInSnapshot(seq, kMaxSequence) == SnapshotCheckerResult::kInSnapshot;
}
```
With that being said, we focus on write-prepared/write-unprepared transactions.
A few notes:
- A key can exist in the db even if it's uncommitted. Therefore, we rely on `snapshot_checker_` to determine data visibility. We also require that all writes go through transaction API instead of the raw `WriteBatch` + `Write`, thus at most one uncommitted version of one user key can exist in the database.
- `CompactionIterator` outputs a key as long as the key is uncommitted.
Due to the above reasons, it is possible that `CompactionIterator` decides to output an uncommitted key without
doing further checks on the key (`NextFromInput()`). By the time the key is being prepared for output, the key becomes
committed because the `snapshot_checker_(seq, kMaxSequence)` becomes true in the implementation of `KeyCommitted()`.
Then `CompactionIterator` will try to zero its sequence number and hit assertion error if the key is a tombstone.
To fix this issue, we should make the `CompactionIterator` see a consistent view of the input keys. Note that
for write-prepared/write-unprepared, the background flush/compaction jobs already take a "job snapshot" before starting
processing keys. The job snapshot is released only after the entire flush/compaction finishes. We can use this snapshot
to determine whether a key is committed or not with minor change to `KeyCommitted()`.
```
inline bool KeyCommitted(SequenceNumber sequence) {
// For non-txn-db and write-committed, snapshot_checker_ is always nullptr.
return snapshot_checker_ == nullptr ||
snapshot_checker_->CheckInSnapshot(sequence, job_snapshot_) ==
SnapshotCheckerResult::kInSnapshot;
}
```
As a result, whether a key is committed or not will remain a constant throughout compaction, causing no trouble
for `CompactionIterator`s assertions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9830
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D35561162
Pulled By: riversand963
fbshipit-source-id: 0e00d200c195240341cfe6d34cbc86798b315b9f
Summary:
Fixes a major performance regression in 6.26, where
extra CPU is spent in SliceTransform::AsString when reads involve
a prefix_extractor (Get, MultiGet, Seek). Common case performance
is now better than 6.25.
This change creates a "fast path" for verifying that the current prefix
extractor is unchanged and compatible with what was used to
generate a table file. This fast path detects the common case by
pointer comparison on the current prefix_extractor and a "known
good" prefix extractor (if applicable) that is saved at the time the
table reader is opened. The "known good" prefix extractor is saved
as another shared_ptr copy (in an existing field, however) to ensure
the pointer is not recycled.
When the prefix_extractor has changed to a different instance but
same compatible configuration (rare, odd), performance is still a
regression compared to 6.25, but this is likely acceptable because
of the oddity of such a case. The performance of incompatible
prefix_extractor is essentially unchanged.
Also fixed a minor case (ForwardIterator) where a prefix_extractor
could be used via a raw pointer after being freed as a shared_ptr,
if replaced via SetOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9407
Test Plan:
## Performance
Populate DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`
Running head-to-head comparisons simultaneously with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=seekrandom -num=10000000 -duration=20 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`
Below each is compared by ops/sec vs. baseline which is version 6.25 (multiple baseline runs because of variable machine load)
v6.26: 4833 vs. 6698 (<- major regression!)
v6.27: 4737 vs. 6397 (still)
New: 6704 vs. 6461 (better than baseline in common case)
Disabled fastpath: 4843 vs. 6389 (e.g. if prefix extractor instance changes but is still compatible)
Changed prefix size (no usable filter) in new: 787 vs. 5927
Changed prefix size (no usable filter) in new & baseline: 773 vs. 784
Reviewed By: mrambacher
Differential Revision: D33677812
Pulled By: pdillinger
fbshipit-source-id: 571d9711c461fb97f957378a061b7e7dbc4d6a76
Summary:
Fix a bug that causes file temperature not preserved after DB is restarted, or options.max_manifest_file_size is hit.
Also, pass temperature information to NewRandomAccessFile() to allow users to hack a solution where they don't preserve tiering information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9242
Test Plan: Add a unit test that would fail without the fix.
Reviewed By: jay-zhuang
Differential Revision: D32818150
fbshipit-source-id: 36aa3f148c60107f7b8e9d65b63b039f9e1a1eec
Summary:
Track per-SST user-defined timestamp information in MANIFEST https://github.com/facebook/rocksdb/issues/8957
Rockdb has supported user-defined timestamp feature. Application can specify a timestamp
when writing each k-v pair. When data flush from memory to disk file called SST files, file
creation activity will commit to MANIFEST. This commit is for tracking timestamp info in the
MANIFEST for each file. The changes involved are as follows:
1) Track max/min timestamp in FileMetaData, and fix invoved codes.
2) Add NewFileCustomTag::kMinTimestamp and NewFileCustomTag::kMinTimestamp in
NewFileCustomTag ( in the kNewFile4 part ), and support invoved codes such as
VersionEdit Encode and Decode etc.
3) Add unit test code for VersionEdit EncodeDecodeNewFile4, and fix invoved test codes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9092
Reviewed By: ajkr, akankshamahajan15
Differential Revision: D32252323
Pulled By: riversand963
fbshipit-source-id: d2642898d6e3ad1fef0eb866b98045408bd4e162
Summary:
This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead.
Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing.
Hopefully, this sort of code hygiene cleanup will speed up the builds...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930
Reviewed By: pdillinger
Differential Revision: D31142788
Pulled By: mrambacher
fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d
Summary:
1. Extend FlushJobInfo and CompactionJobInfo with information about the blob files generated by flush/compaction jobs. This PR add two structures BlobFileInfo and BlobFileGarbageInfo that contains the required information of blob files.
2. Notify the creation and deletion of blob files through OnBlobFileCreationStarted, OnBlobFileCreated, and OnBlobFileDeleted.
3. Test OnFile*Finish operations notifications with Blob Files.
4. Log the blob file creation/deletion events through EventLogger in Log file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8675
Test Plan: Add new unit tests in listener_test
Reviewed By: ltamasi
Differential Revision: D30412613
Pulled By: akankshamahajan15
fbshipit-source-id: ca51b63c6e8c8d0485a38c503572bc5a82bd5d07
Summary:
Extends https://github.com/facebook/rocksdb/issues/8659 to work for ingested external SST files, even
the same file ingested into different DBs sharing a block cache.
Note: These new cache keys are currently only enabled when FileSystem
does not provide GetUniqueId. For now, they are typically larger,
so slightly less efficient.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8669
Test Plan: Extended unit test
Reviewed By: zhichao-cao
Differential Revision: D30398532
Pulled By: pdillinger
fbshipit-source-id: 1f13e2af4b8bfff5741953a69466e9589fbc23c7
Summary:
Prior to this change, the "wal_dir" DBOption would always be set (defaults to dbname) when the DBOptions were sanitized. Because of this setitng in the options file, it was not possible to rename/relocate a database directory after it had been created and use the existing options file.
After this change, the "wal_dir" option is only set under specific circumstances. Methods were added to the ImmutableDBOptions class to see if it is set and if it is set to something other than the dbname. Additionally, a method was added to retrieve the effective value of the WAL dir (either the option or the dbname/path).
Tests were added to the core and ldb to test that a database could be created and renamed without issue. Additional tests for various permutations of wal_dir were also added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8582
Reviewed By: pdillinger, autopear
Differential Revision: D29881122
Pulled By: mrambacher
fbshipit-source-id: 67d3d033dc8813d59917b0a3fba2550c0efd6dfb
Summary:
* Basic handling of SST file with just range tombstones rather than
failing assertion about smallest_seqno <= largest_seqno
* Adds --verbose option so that there exists a way to see the INFO
output from Repairer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8544
Test Plan: unit test added, manual testing for --verbose
Reviewed By: ajkr
Differential Revision: D29954805
Pulled By: pdillinger
fbshipit-source-id: 696af25805fc36cc178b04ba6045922a22625fd9
Summary:
FileOptions has an implicit conversion from EnvOptions and some
internal APIs take `const FileOptions&` and save the reference, which is
counter to Google C++ guidelines,
> Avoid defining functions that require a const reference parameter to outlive the call, because const reference parameters bind to temporaries. Instead, find a way to eliminate the lifetime requirement (for example, by copying the parameter), or pass it by const pointer and document the lifetime and non-null requirements.
This is at least a problem for repair.cc, which passes an EnvOptions to
TableCache(), which would save a reference to the temporary copy as
FileOptions. This was unfortunately only caught as a side effect of
changes in https://github.com/facebook/rocksdb/issues/8544.
This change fixes the repair.cc case and updates the involved internal
APIs that save a reference to use `const FileOptions*` instead.
Unfortunately, I don't know how to get any of our sanitizers to reliably
report bugs like this, so I can't rule out more existing in our
codebase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8571
Test Plan:
Test that issues seen with https://github.com/facebook/rocksdb/issues/8544 are fixed (can reproduce on
AWS EC2)
Reviewed By: ajkr
Differential Revision: D29943890
Pulled By: pdillinger
fbshipit-source-id: 95f9c5251548777b4dc994c1a083dd2add5799c9
Summary:
The main challenge to make the memtable garbage collection prototype (nicknamed `mempurge`) was to not get rid of WAL files that contain unflushed (but mempurged) data. That was successfully guaranteed by not writing the VersionEdit to the MANIFEST file after a successful mempurge.
By not writing VersionEdits to the `MANIFEST` file after a succesful mempurge operation, we do not change the earliest log file number that contains unflushed data: `cfd->GetLogNumber()` (`cfd->SetLogNumber()` is only called in `VersionSet::ProcessManifestWrites`). As a result, a number of functions introduced earlier just for the mempurge operation are not obscolete/redundant. (e.g.: `FlushJob::ExtractEarliestLogFileNumber`), and this PR aims at cleaning up all these now-unnecessary functions. In particular, we no longer need to store the earliest log file number in the `MemTable` struct itself. This PR therefore also reverts the `MemTable` struct to its original form.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8558
Test Plan: Already included in `db_flush_test.cc`.
Reviewed By: anand1976
Differential Revision: D29764351
Pulled By: bjlemaire
fbshipit-source-id: 0f43b260fa270251862512f397d3f24ee62e8437
Summary:
In this PR, `mempurge` is made compatible with the Write Ahead Log: in case of recovery, the DB is now capable of recovering the data that was "mempurged" and kept in the `imm()` list of immutable memtables.
The twist was to add a uint64_t to the `memtable` struct to store the number of the earliest log file containing entries from the `memtable`. When a `Flush` operation is replaced with a `MemPurge`, the `VersionEdit` (which usually contains the new min log file number to pick up for recovery and the level 0 file path of the newly created SST file) is no longer appended to the manifest log, and every time the `deleteWal` method is called, a check is made on the list of immutable memtables.
This PR also includes a unit test that verifies that no data is lost upon Reopening of the database when the mempurge feature is activated. This extensive unit test includes two column families, with valid data contained in the imm() at time of "crash"/reopening (recovery).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8528
Reviewed By: pdillinger
Differential Revision: D29701097
Pulled By: bjlemaire
fbshipit-source-id: 072a900fb6ccc1edcf5eef6caf88f3060238edf9
Summary:
Currently, we either use the file system inode or a monotonically incrementing runtime ID as the block cache key prefix. However, if we use a monotonically incrementing runtime ID (in the case that the file system does not support inode id generation), in some cases, it cannot ensure uniqueness (e.g., we have secondary cache migrated from host to host). We use DbSessionID (20 bytes) + current file number (at most 10 bytes) as the new cache block key prefix when the secondary cache is enabled. So can accommodate scenarios such as transfer of cache state across hosts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8360
Test Plan: add the test to lru_cache_test
Reviewed By: pdillinger
Differential Revision: D29006215
Pulled By: zhichao-cao
fbshipit-source-id: 6cff686b38d83904667a2bd39923cd030df16814
Summary:
The ImmutableCFOptions contained a bunch of fields that belonged to the ImmutableDBOptions. This change cleans that up by introducing an ImmutableOptions struct. Following the pattern of Options struct, this class inherits from the DB and CFOption structs (of the Immutable form).
Only one structural change (the ImmutableCFOptions::fs was changed to a shared_ptr from a raw one) is in this PR. All of the other changes involve moving the member variables from the ImmutableCFOptions into the ImmutableOptions and changing member variables or function parameters as required for compilation purposes.
Follow-on PRs may do a further clean-up of the code, such as renaming variables (such as "ImmutableOptions cf_options") and potentially eliminating un-needed function parameters (there is no longer a need to pass both an ImmutableDBOptions and an ImmutableOptions to a function).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8262
Reviewed By: pdillinger
Differential Revision: D28226540
Pulled By: mrambacher
fbshipit-source-id: 18ae71eadc879dedbe38b1eb8e6f9ff5c7147dbf
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
Summary:
Greatly reduced the not-quite-copy-paste giant parameter lists
of rocksdb::NewTableBuilder, rocksdb::BuildTable,
BlockBasedTableBuilder::Rep ctor, and BlockBasedTableBuilder ctor.
Moved weird separate parameter `uint32_t column_family_id` of
TableFactory::NewTableBuilder into TableBuilderOptions.
Re-ordered parameters to TableBuilderOptions ctor, so that `uint64_t
target_file_size` is not randomly placed between uint64_t timestamps
(was easy to mix up).
Replaced a couple of fields of BlockBasedTableBuilder::Rep with a
FilterBuildingContext. The motivation for this change is making it
easier to pass along more data into new fields in FilterBuildingContext
(follow-up PR).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8240
Test Plan: ASAN make check
Reviewed By: mrambacher
Differential Revision: D28075891
Pulled By: pdillinger
fbshipit-source-id: fddb3dbb8260a0e8bdcbb51b877ebabf9a690d4f
Summary:
Previously it only applied to block-based tables generated by flush. This restriction
was undocumented and blocked a new use case. Now compression sampling
applies to all block-based tables we generate when it is enabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8105
Test Plan: new unit test
Reviewed By: riversand963
Differential Revision: D27317275
Pulled By: ajkr
fbshipit-source-id: cd9fcc5178d6515e8cb59c6facb5ac01893cb5b0
Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes.
For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.
There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved.
Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:
6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found)
6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found)
PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found)
(Note that the times for 6.18 are prior to revert of the SystemClock).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033
Reviewed By: pdillinger
Differential Revision: D27014563
Pulled By: mrambacher
fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
Summary:
Removed the uses of the Legacy FileWrapper classes from the source code. The wrappers were creating an additional layer of indirection/wrapping, as the Env already has a FileSystem.
Moved the Custom FileWrapper classes into the CustomEnv, as these classes are really for the private use the the CustomEnv class.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7851
Reviewed By: anand1976
Differential Revision: D26114816
Pulled By: mrambacher
fbshipit-source-id: db32840e58d969d3a0fa6c25aaf13d6dcdc74150
Summary:
This PR does the following:
-> Creates a WinFileSystem class. This class is the Windows equivalent of the PosixFileSystem and will be used on Windows systems.
-> Introduces a CustomEnv class. A CustomEnv is an Env that takes a FileSystem as constructor argument. I believe there will only ever be two implementations of this class (PosixEnv and WinEnv). There is still a CustomEnvWrapper class that takes an Env and a FileSystem and wraps the Env calls with the input Env but uses the FileSystem for the FileSystem calls
-> Eliminates the public uses of the LegacyFileSystemWrapper.
With this change in place, there are effectively the following patterns of Env:
- "Base Env classes" (PosixEnv, WinEnv). These classes implement the core Env functions (e.g. Threads) and have a hard-coded input FileSystem. These classes inherit from CompositeEnv, implement the core Env functions (threads) and delegate the FileSystem-like calls to the input file system.
- Wrapped Composite Env classes (MemEnv). These classes take in an Env and a FileSystem. The core env functions are re-directed to the wrapped env. The file system calls are redirected to the input file system
- Legacy Wrapped Env classes. These classes take in an Env input (but no FileSystem). The core env functions are re-directed to the wrapped env. A "Legacy File System" is created using this env and the file system calls directed to the env itself.
With these changes in place, the PosixEnv becomes a singleton -- there is only ever one created. Any other use of the PosixEnv is via another wrapped env. This cleans up some of the issues with the env construction and destruction.
Additionally, there were places in the code that required had an Env when they required a FileSystem. Many of these places would wrap the Env with a LegacyFileSystemWrapper instead of using the env->GetFileSystem(). These places were changed, thereby removing layers of additional redirection (LegacyFileSystem --> Env --> Env::FileSystem).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7703
Reviewed By: zhichao-cao
Differential Revision: D25762190
Pulled By: anand1976
fbshipit-source-id: 1a088e97fc916f28ac69c149cd1dcad0ab31704b
Summary:
https://github.com/facebook/rocksdb/issues/7556 enables `CompactionIterator` to perform garbage collection during compaction according
to a lower bound (user-defined) timestamp `full_history_ts_low_`.
This PR adds a data member `full_history_ts_low_` of type `std::string` to `FlushJob`, and
`full_history_ts_low_` does not change during flush. `FlushJob` will pass a pointer to this data member
to the `CompactionIterator` used during flush.
Also refactored flush_job_test.cc to re-use some existing code, which is actually the majority of this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7655
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D24933340
Pulled By: riversand963
fbshipit-source-id: 2e584bfd0cf6e5c295ab1af264e68e9d6a12fca3
Summary:
Fixes Issue https://github.com/facebook/rocksdb/issues/7497
When allow_data_in_errors db_options is set, log error key details in `ParseInternalKey()`
Have fixed most of the calls. Have few TODOs still pending - because have to make more deeper changes to pass in the allow_data_in_errors flag. Will do those in a separate PR later.
Tests:
- make check
- some of the existing tests that exercise the "internal key too small" condition are: dbformat_test, cuckoo_table_builder_test
- some of the existing tests that exercise the corrupted key path are: corruption_test, merge_helper_test, compaction_iterator_test
Example of new status returns:
- Key too small - `Corrupted Key: Internal Key too small. Size=5`
- Corrupt key with allow_data_in_errors option set to false: `Corrupted Key: '<redacted>' seq:3, type:3`
- Corrupt key with allow_data_in_errors option set to true: `Corrupted Key: '61' seq:3, type:3`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7515
Reviewed By: ajkr
Differential Revision: D24240264
Pulled By: ramvadiv
fbshipit-source-id: bc48f5d4475ac19d7713e16df37505b31aac42e7
Summary:
As suggested by pdillinger ,The name of kLogFile is misleading, in some tests, kLogFile is defined as info log. Replace it with kWalFile and move it to public, which will be used in https://github.com/facebook/rocksdb/issues/7523
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7580
Test Plan: make check
Reviewed By: riversand963
Differential Revision: D24485420
Pulled By: zhichao-cao
fbshipit-source-id: 955e3dacc1021bb590fde93b0a568ffe9ad80799
Summary:
The patch adds support for writing blob files during flush by integrating
`BlobFileBuilder` with the flush logic, most importantly, `BuildTable` and
`CompactionIterator`. If `enable_blob_files` is set, large values are extracted
to blob files and replaced with references. The resulting blob files are then
logged to the MANIFEST as part of the flush job's `VersionEdit` and
added to the `Version`, similarly to table files. Errors related to writing
blob files fail the flush, and any blob files written by such jobs are immediately
deleted (again, similarly to how SST files are handled). In addition, the patch
extends the logging and statistics around flushes to account for the presence
of blob files (e.g. `InternalStats::CompactionStats::bytes_written`, which is
used for calculating write amplification, now considers the blob files as well).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7345
Test Plan: Tested using `make check` and `db_bench`.
Reviewed By: riversand963
Differential Revision: D23506369
Pulled By: ltamasi
fbshipit-source-id: 646885f22dfbe063f650d38a1fedc132f499a159
Summary:
Replace FSWritableFile pointer with FSWritableFilePtr
object in WritableFileWriter.
This new object wraps FSWritableFile pointer.
Objective: If tracing is enabled, FSWritableFile Ptr returns
FSWritableFileTracingWrapper pointer that includes all necessary
information in IORecord and calls underlying FileSystem and invokes
IOTracer to dump that record in a binary file. If tracing is disabled
then, underlying FileSystem pointer is returned directly.
FSWritableFilePtr wrapper class is added to bypass the
FSWritableFileWrapper when
tracing is disabled.
Test Plan: make check -j64
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7193
Reviewed By: anand1976
Differential Revision: D23355915
Pulled By: akankshamahajan15
fbshipit-source-id: e62a27a13c1fd77e36a6dbafc7006d969bed25cf
Summary:
Replace FSRandomAccessFile pointer with FSRandomAccessFilePtr
object in RandomAccessFileReader.
This new object wraps FSRandomAccessFile pointer.
Objective: If tracing is enabled, FSRandomAccessFile Ptr returns
FSRandomAccessFileTracingWrapper pointer that includes all necessary
information in IORecord and calls underlying FileSystem and invokes
IOTracer to dump that record in a binary file. If tracing is disabled
then, underlying FileSystem pointer is returned directly.
FSRandomAccessFilePtr wrapper class is added to bypass the FSRandomAccessFileWrapper when
tracing is disabled.
Test Plan: make check -j64
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7192
Reviewed By: anand1976
Differential Revision: D23356867
Pulled By: akankshamahajan15
fbshipit-source-id: 48f31168166a17a7444b40be44a9a9d4a5c7182c
Summary:
As part of the IOTracing project, this PR
1. Caches "FileSystemPtr" object(wrapper class that returns file system pointer based on tracing enabled) instead of "FileSystem" pointer.
2. FileSystemPtr object is created using FileSystem pointer and IOTracer
pointer.
3. IOTracer shared_ptr is created in DBImpl and it is passed to different classes through constructor.
4. When tracing is enabled through DB::StartIOTrace, FileSystemPtr
returns FileSystemTracingWrapper pointer for tracing purpose and when
it is disabled underlying FileSystem pointer is returned.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7180
Test Plan:
make check -j64
COMPILE_WITH_TSAN=1 make check -j64
Reviewed By: anand1976
Differential Revision: D22987117
Pulled By: akankshamahajan15
fbshipit-source-id: 6073617e4c2d5bc363914f3a1f55ae3b0a58fbf1
Summary:
There currently exist multiple `GetChildren()` calls in `DBImpl::Recover()`, which can be expensive in cases of distributed file systems.
This pull request try to call `DBImpl::Recover()` of each necessary directory only _once_ and reuse the results in the places of repeated calls in current code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7044
Test Plan:
Run `make check` and use the default test suite. The modified code should be semantically identical to the current code. As a proof of this solution, we may optionally deploy the system onto a (real or simulated) distributed system and expect reduced latency caused by manifest fetching.
(WIP)
Reviewed By: riversand963
Differential Revision: D22419925
Pulled By: roghnin
fbshipit-source-id: d3774fbfbc246c5527101bc16747eb5c90919886
Summary:
`db_id` and `db_session_id` are now part of the table properties for all formats and stored in SST files. This adds about 99 bytes to each new SST file.
The `TablePropertiesNames` for these two identifiers are `rocksdb.creating.db.identity` and `rocksdb.creating.session.identity`.
In addition, SST files generated from SstFileWriter and Repairer have DB identity “SST Writer” and “DB Repairer”, respectively. Their DB session IDs are generated in the same way as `DB::GetDbSessionId`.
A table property test is added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6983
Test Plan: make check and some manual tests.
Reviewed By: zhichao-cao
Differential Revision: D22048826
Pulled By: gg814
fbshipit-source-id: afdf8c11424a6f509b5c0b06dafad584a80103c9
Summary:
Memory pinned by `pin_l0_filter_and_index_blocks_in_cache` needs to be predictable based on user config. This PR makes sure
we do not pin extra memory for large files generated by intra-L0 (see https://github.com/facebook/rocksdb/issues/6889).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6911
Test Plan: unit test
Reviewed By: siying
Differential Revision: D21835818
Pulled By: ajkr
fbshipit-source-id: a11a088549d06bed8aacc2548d266e5983f0ead4
Summary:
Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype.
Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling.
It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas.
Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621
Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats.
Reviewed By: siying
Differential Revision: D20786930
Pulled By: al13n321
fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.
The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487
Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check
Reviewed By: anand1976
Differential Revision: D20685017
Pulled By: zhichao-cao
fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
Summary:
The current Env/FileSystem API separation has a couple of issues -
1. It requires the user to specify 2 options - ```Options::env``` and ```Options::file_system``` - which means they have to make code changes to benefit from the new APIs. Furthermore, there is a risk of accessing the same APIs in two different ways, through Env in the old way and through FileSystem in the new way. The two may not always match, for example, if env is ```PosixEnv``` and FileSystem is a custom implementation. Any stray RocksDB calls to env will use the ```PosixEnv``` implementation rather than the file_system implementation.
2. There needs to be a simple way for the FileSystem developer to instantiate an Env for backward compatibility purposes.
This PR solves the above issues and simplifies the migration in the following ways -
1. Embed a shared_ptr to the ```FileSystem``` in the ```Env```, and remove ```Options::file_system``` as a configurable option. This way, no code changes will be required in application code to benefit from the new API. The default Env constructor uses a ```LegacyFileSystemWrapper``` as the embedded ```FileSystem```.
1a. - This also makes it more robust by ensuring that even if RocksDB
has some stray calls to Env APIs rather than FileSystem, they will go
through the same object and thus there is no risk of getting out of
sync.
2. Provide a ```NewCompositeEnv()``` API that can be used to construct a
PosixEnv with a custom FileSystem implementation. This eliminates an
indirection to call Env APIs, and relieves the FileSystem developer of
the burden of having to implement wrappers for the Env APIs.
3. Add a couple of missing FileSystem APIs - ```SanitizeEnvOptions()``` and
```NewLogger()```
Tests:
1. New unit tests
2. make check and make asan_check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6552
Reviewed By: riversand963
Differential Revision: D20592038
Pulled By: anand1976
fbshipit-source-id: c3801ad4153f96d21d5a3ae26c92ba454d1bf1f7
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
In the current code base, RocksDB generate the checksum for each block and verify the checksum at usage. Current PR enable SST file checksum. After a SST file is generated by Flush or Compaction, RocksDB generate the SST file checksum and store the checksum value and checksum method name in the vs_info and MANIFEST as part for the FileMetadata.
Added the enable_sst_file_checksum to Options to enable or disable file checksum. Added sst_file_checksum to Options such that user can plugin their own SST file checksum calculate method via overriding the SstFileChecksum class. The checksum information inlcuding uint32_t checksum value and a checksum name (string). A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST. If user enables the file checksum but does not provide the sst_file_checksum instance, RocksDB will use the default crc32checksum implemented in table/sst_file_checksum_crc32c.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6216
Test Plan: Added the testing case in table_test and ldb_cmd_test to verify checksum is correct in different level. Pass make asan_check.
Differential Revision: D19171461
Pulled By: zhichao-cao
fbshipit-source-id: b2e53479eefc5bb0437189eaa1941670e5ba8b87
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
Summary:
options.periodic_compaction_seconds isn't supported when options.max_open_files != -1. It's because that the information of file creation time is stored in table properties and are not guaranteed to be loaded unless options.max_open_files = -1. Relax this constraint by storing the information in manifest.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6090
Test Plan: Pass all existing tests; Modify an existing test to force the manifest value to take 0 to simulate backward compatibility case; manually open the DB generated with the change by release 4.2.
Differential Revision: D18702268
fbshipit-source-id: 13e0bd94f546498a04f3dc5fc0d9dff5125ec9eb
Summary:
Previously, options.ttl cannot be set with options.max_open_files = -1, because it makes use of creation_time field in table properties, which is not available unless max_open_files = -1. With this commit, the information will be stored in manifest and when it is available, will be used instead.
Note that, this change will break forward compatibility for release 5.1 and older.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6060
Test Plan: Extend existing test case to options.max_open_files != -1, and simulate backward compatility in one test case by forcing the value to be 0.
Differential Revision: D18631623
fbshipit-source-id: 30c232a8672de5432ce9608bb2488ecc19138830
Summary:
This is groundwork for adding garbage collection support to BlobDB. The
patch adds logic that keeps track of the oldest blob file referred to by
each SST file. The oldest blob file is identified during flush/
compaction (similarly to how the range of keys covered by the SST is
identified), and persisted in the manifest as a custom field of the new
file edit record. Blob indexes with TTL are ignored for the purposes of
identifying the oldest blob file (since such blob files are cleaned up by the
TTL logic in BlobDB).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5903
Test Plan:
Added new unit tests; also ran db_bench in BlobDB mode, inspected the
manifest using ldb, and confirmed (by scanning the SST files using
sst_dump) that the value of the oldest blob file number field matches
the contents of the file for each SST.
Differential Revision: D17859997
Pulled By: ltamasi
fbshipit-source-id: 21662c137c6259a6af70446faaf3a9912c550e90
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803
Test Plan: Build whole project using make and cmake.
Differential Revision: D17374550
fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
This PR adds more callers for table readers. These information are only used for block cache analysis so that we can know which caller accesses a block.
1. It renames the BlockCacheLookupCaller to TableReaderCaller as passing the caller from upstream requires changes to table_reader.h and TableReaderCaller is a more appropriate name.
2. It adds more table reader callers in table/table_reader_caller.h, e.g., kCompactionRefill, kExternalSSTIngestion, and kBuildTable.
This PR is long as it requires modification of interfaces in table_reader.h, e.g., NewIterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5454
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32.
Differential Revision: D15819451
Pulled By: HaoyuHuang
fbshipit-source-id: b6caa704c8fb96ddd15b9a934b7e7ea87f88092d
Summary:
This PR integrates the block cache tracer class into db_impl.cc.
db_impl.cc contains a member variable of AtomicBlockCacheTraceWriter class and passes its reference to the block_based_table_reader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5433
Differential Revision: D15728016
Pulled By: HaoyuHuang
fbshipit-source-id: 23d5659e8c82d556833dcc1a5558aac8c1f7db71
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
util/ means for lower level libraries, so it's a good idea to move the files which requires knowledge to DB out. Create a file/ and move some files there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5375
Differential Revision: D15550935
Pulled By: siying
fbshipit-source-id: 61a9715dcde5386eebfb43e93f847bba1ae0d3f2
Levi Tamasi
