Summary:
Try avoid expensive updating options operation if
`SetDBOptions()` does not change any option value.
Skip updating is not guaranteed, for example, changing `bytes_per_sync`
to `0` may still trigger updating, as the value could be sanitized.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8518
Test Plan: added unittest
Reviewed By: riversand963
Differential Revision: D29672639
Pulled By: jay-zhuang
fbshipit-source-id: b7931de62ceea6f1bdff0d1209adf1197d3ed1f4
Summary:
If we want to check whether a Status s is NoSpace() or not, we should check the subcode instread of using s==Status::NoSpace(). Fix some of the incorrect check in the ErrorHandler.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8504
Test Plan: make check
Reviewed By: anand1976
Differential Revision: D29601764
Pulled By: zhichao-cao
fbshipit-source-id: cdab56a827891c23746bba9cbb53f169fe35f086
Summary:
Currently, the code shows that we delete memtables immedately after it is trimmed from history. Although it should never happen as the super version still holds the memtable, which is only switched after it, it feels a good practice not to do it, but use clean it up in the standard way: put it to WriteContext and clean it after DB mutex.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8530
Test Plan: Run all existing tests.
Reviewed By: ajkr
Differential Revision: D29703410
fbshipit-source-id: 21d8068ac6377de4b6fa7a89697195742659fde4
Summary:
I previously didn't notice the DB mutex was being held during
block cache entry stat scans, probably because I primarily checked for
read performance regressions, because they require the block cache and
are traditionally latency-sensitive.
This change does some refactoring to avoid holding DB mutex and to
avoid triggering and waiting for a scan in GetProperty("rocksdb.cfstats").
Some tests have to be updated because now the stats collector is
populated in the Cache aggressively on DB startup rather than lazily.
(I hope to clean up some of this added complexity in the future.)
This change also ensures proper treatment of need_out_of_mutex for
non-int DB properties.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8538
Test Plan:
Added unit test logic that uses sync points to fail if the DB mutex
is held during a scan, covering the various ways that a scan might be
triggered.
Performance test - the known impact to holding the DB mutex is on
TransactionDB, and the easiest way to see the impact is to hack the
scan code to almost always miss and take an artificially long time
scanning. Here I've injected an unconditional 5s sleep at the call to
ApplyToAllEntries.
Before (hacked):
$ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 433.219 micros/op 2308 ops/sec; 0.1 MB/s ( transactions:78999 aborts:0)
rocksdb.db.write.micros P50 : 16.135883 P95 : 36.622503 P99 : 66.036115 P100 : 5000614.000000 COUNT : 149677 SUM : 8364856
$ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 448.802 micros/op 2228 ops/sec; 0.1 MB/s ( transactions:75999 aborts:0)
rocksdb.db.write.micros P50 : 16.629221 P95 : 37.320607 P99 : 72.144341 P100 : 5000871.000000 COUNT : 143995 SUM : 13472323
Notice the 5s P100 write time.
After (hacked):
$ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 303.645 micros/op 3293 ops/sec; 0.1 MB/s ( transactions:98999 aborts:0)
rocksdb.db.write.micros P50 : 16.061871 P95 : 33.978834 P99 : 60.018017 P100 : 616315.000000 COUNT : 187619 SUM : 4097407
$ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 310.383 micros/op 3221 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0)
rocksdb.db.write.micros P50 : 16.270026 P95 : 35.786844 P99 : 64.302878 P100 : 603088.000000 COUNT : 183819 SUM : 4095918
P100 write is now ~0.6s. Not good, but it's the same even if I completely bypass all the scanning code:
$ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 311.365 micros/op 3211 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0)
rocksdb.db.write.micros P50 : 16.274362 P95 : 36.221184 P99 : 68.809783 P100 : 649808.000000 COUNT : 183819 SUM : 4156767
$ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 308.395 micros/op 3242 ops/sec; 0.1 MB/s ( transactions:97999 aborts:0)
rocksdb.db.write.micros P50 : 16.106222 P95 : 37.202403 P99 : 67.081875 P100 : 598091.000000 COUNT : 185714 SUM : 4098832
No substantial difference.
Reviewed By: siying
Differential Revision: D29738847
Pulled By: pdillinger
fbshipit-source-id: 1c5c155f5a1b62e4fea0fd4eeb515a8b7474027b
Summary:
Made the EncryptionProvider and BlockCipher classes inherit from Customizable. Added/fixed the CreateFromString method to these classes to create instances from builtin or registered classes. Added tests to verify that instances can be registered and retrieved as appropriate.
Added the ability to configure the builtin (CTR, ROT13) classes from configurable properties. Added the appropriate tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8354
Reviewed By: zhichao-cao
Differential Revision: D29558949
Pulled By: mrambacher
fbshipit-source-id: c20286b32d179777e060f51a58943e9b0cf81d04
Summary:
In this PR, `mempurge` is made compatible with the Write Ahead Log: in case of recovery, the DB is now capable of recovering the data that was "mempurged" and kept in the `imm()` list of immutable memtables.
The twist was to add a uint64_t to the `memtable` struct to store the number of the earliest log file containing entries from the `memtable`. When a `Flush` operation is replaced with a `MemPurge`, the `VersionEdit` (which usually contains the new min log file number to pick up for recovery and the level 0 file path of the newly created SST file) is no longer appended to the manifest log, and every time the `deleteWal` method is called, a check is made on the list of immutable memtables.
This PR also includes a unit test that verifies that no data is lost upon Reopening of the database when the mempurge feature is activated. This extensive unit test includes two column families, with valid data contained in the imm() at time of "crash"/reopening (recovery).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8528
Reviewed By: pdillinger
Differential Revision: D29701097
Pulled By: bjlemaire
fbshipit-source-id: 072a900fb6ccc1edcf5eef6caf88f3060238edf9
Summary:
The removed function in this PR, just only have declared and dose not have any reference used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8508
Reviewed By: mrambacher
Differential Revision: D29649033
Pulled By: jay-zhuang
fbshipit-source-id: df98143b73d6c184a2a60c9f7ea2548a065ee35d
Summary:
This PR is for https://github.com/facebook/rocksdb/issues/8453
We need to update `s = biter.status();` when `biter.status().IsIncomplete()` is true. By doing this, can fix the problem in issue.
Besides, we still need to update `db_statistics` in `get_context.ReportCounters()` before return back.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8485
Reviewed By: jay-zhuang
Differential Revision: D29604835
Pulled By: ajkr
fbshipit-source-id: c7f2f1cd058223ce1b507ec05d57cf264b9c9710
Summary:
The MemPurge output status can either be an Abort if the mempurge is aborted due to the new_mem memtable reaching more than the target capacity (currently 60%), or for other reasons. As a result, in the log, we want to differentiate between an abort status, which in this PR only leads to a ROCKS_LOG_INFO, and any other status, which in this PR leads to a ROCKS_LOG_WARN.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8514
Reviewed By: pdillinger
Differential Revision: D29662446
Pulled By: bjlemaire
fbshipit-source-id: c9bec8e238ebc7ecb14fbbddf580e6887e281c16
Summary:
When db is open as secondary, there are basically 2 step process:
1) Collect column families from wal log
2) Apply changes to Memtable
In case primary db is TransactionDB instance, wal log will contain some additional data, like noop, etc. ColumnFamilyCollector doesn't implement methods to handle these, so it fails to open a wal log written by TransactionDB. (Everything works fine with standard DB::Open).
Memtable recovery process knows how to handle such wal logs, so only missing piece seems to be ColumnFamilyCollector.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8456
Reviewed By: ajkr
Differential Revision: D29455945
Pulled By: mrambacher
fbshipit-source-id: 5b29560fcbc008e17e95d0dc4b07558f3d63e26f
Summary:
In ```DBImpl::WriteImpl()```, we call ```PreprocessWrite()``` which, among other things, checks the BG error and returns it set. This return status is later on passed to ```WriteStatusCheck()```, which calls ```SetBGError()```. This results in a spurious call, and info logs, on every user write request. We should avoid passing the ```PreprocessWrite()``` return status to ```WriteStatusCheck()```, as the former would have called ```SetBGError()``` already if it encountered any new errors, such as error when creating a new WAL file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8511
Test Plan: Run existing tests
Reviewed By: zhichao-cao
Differential Revision: D29639917
Pulled By: anand1976
fbshipit-source-id: 19234163969e1645dbeb273712aaf5cd9ea2b182
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
Summary:
Various tests had disabled valgrind due to it slowing down and timing
out (as is the case right now) the CI runs. Where a test was disabled with no comment,
I assumed slowness was the cause. For these tests that were slow under
valgrind, as well as the ones identified in https://github.com/facebook/rocksdb/issues/8352, this PR moves them
behind the compiler flag `-DROCKSDB_FULL_VALGRIND_RUN`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8475
Test Plan: running `make full_valgrind_test`, `make valgrind_test`, `make check`; will verify they appear working correctly
Reviewed By: jay-zhuang
Differential Revision: D29504843
Pulled By: ajkr
fbshipit-source-id: 2aac90749cfbd30d5ce11cb29a07a1b9314eeea7
Summary:
Previously, the following command:
```USE_CLANG=1 TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make -j$(nproc) analyze```
was raising an error/warning the new_mem could potentially be a `nullptr`. This error appeared due to code changes from https://github.com/facebook/rocksdb/issues/8454, including an if-statement containing "`... && new_mem != nullptr && ...`", which made the analyzer believe that past this `if`-statement, a `new_mem==nullptr` was a possible scenario.
This code patch simply introduces `assert`s and removes this condition in the `if`-statement.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8492
Reviewed By: jay-zhuang
Differential Revision: D29571275
Pulled By: bjlemaire
fbshipit-source-id: 75d72246b70ebbbae7dea11ccb5778686d8bcbea
Summary:
We ended up using a different approach for tracking the amount of
garbage in blob files (see e.g. https://github.com/facebook/rocksdb/pull/8450),
so the ability to apply only a range of table property collectors is
now unnecessary. The patch reverts this part of
https://github.com/facebook/rocksdb/pull/8298 while keeping the cleanup done
in that PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8465
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D29399921
Pulled By: ltamasi
fbshipit-source-id: af64816c357d0829b9d7ba8ca1477038138f6f0a
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
Summary:
Change the job_id for remote compaction interface, which will include
both internal compaction job_id, also a sub_compaction_job_id. It is not
a backward compatible change. The user needs to update interface during
upgrade. (We will avoid backward incompatible change after the feature is
not experimental.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8364
Reviewed By: ajkr
Differential Revision: D28917301
Pulled By: jay-zhuang
fbshipit-source-id: 6d72a21f652bb517ad6954d0387b496797fc4e11
Summary:
Added BlobMetaData to ColumnFamilyMetaData and LiveBlobMetaData and DB API GetLiveBlobMetaData to retrieve it.
First pass at struct. More tests and maybe fields to come...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8273
Reviewed By: ltamasi
Differential Revision: D29102400
Pulled By: mrambacher
fbshipit-source-id: 8a2383a4446328be6b91dced9841fdd3dfc80b73
Summary:
In PR https://github.com/facebook/rocksdb/issues/7523 , checksum handoff is introduced in RocksDB for WAL, Manifest, and SST files. When user enable checksum handoff for a certain type of file, before the data is written to the lower layer storage system, we calculate the checksum (crc32c) of each piece of data and pass the checksum down with the data, such that data verification can be down by the lower layer storage system if it has the capability. However, it cannot cover the whole lifetime of the data in the memory and also it potentially introduces extra checksum calculation overhead.
In this PR, we introduce a new interface in WritableFileWriter::Append, which allows the caller be able to pass the data and the checksum (crc32c) together. In this way, WritableFileWriter can directly use the pass-in checksum (crc32c) to generate the checksum of data being passed down to the storage system. It saves the calculation overhead and achieves higher protection coverage. When a new checksum is added with the data, we use Crc32cCombine https://github.com/facebook/rocksdb/issues/8305 to combine the existing checksum and the new checksum. To avoid the segmenting of data by rate-limiter before it is stored, rate-limiter is called enough times to accumulate enough credits for a certain write. This design only support Manifest and WAL which use log_writer in the current stage.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8412
Test Plan: make check, add new testing cases.
Reviewed By: anand1976
Differential Revision: D29151545
Pulled By: zhichao-cao
fbshipit-source-id: 75e2278c5126cfd58393c67b1efd18dcc7a30772
Summary:
Provide support for Merge operation with base values during
Compaction in IntegratedBlobDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8445
Test Plan: Add new unit test
Reviewed By: ltamasi
Differential Revision: D29343949
Pulled By: akankshamahajan15
fbshipit-source-id: 844f6f02f93388a11e6e08bda7bb3a2a28e47c70
Summary:
The patch builds on `BlobGarbageMeter` and `BlobCountingIterator`
(introduced in https://github.com/facebook/rocksdb/issues/8426 and
https://github.com/facebook/rocksdb/issues/8443 respectively)
and ties it all together. It measures the amount of garbage
generated by a compaction and logs the corresponding `BlobFileGarbage`
records as part of the compaction job's `VersionEdit`. Note: in order
to have accurate results, `kRemoveAndSkipUntil` for compaction filters
is implemented using iteration.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8450
Test Plan: Ran `make check` and the crash test script.
Reviewed By: jay-zhuang
Differential Revision: D29338207
Pulled By: ltamasi
fbshipit-source-id: 4381c432ac215139439f6d6fb801a6c0e4d8c128
Summary:
`VersionSet::VerifyCompactionFileConsistency` was superseded by the LSM tree
consistency checks introduced in https://github.com/facebook/rocksdb/pull/6901,
which are more comprehensive, more efficient, and are performed unconditionally
even in release builds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8449
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D29337441
Pulled By: ltamasi
fbshipit-source-id: a05324f88e3400e27e6a00406c878a6276e0c9cc
Summary:
Follow-up to https://github.com/facebook/rocksdb/issues/8426 .
The patch adds a new kind of `InternalIterator` that wraps another one and
passes each key-value encountered to `BlobGarbageMeter` as inflow.
This iterator will be used as an input iterator for compactions when the input
SSTs reference blob files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8443
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D29311987
Pulled By: ltamasi
fbshipit-source-id: b4493b4c0c0c2e3c2ecc33c8969a5ef02de5d9d8
Summary:
This reverts commit 25be1ed66a.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8438
Test Plan: Run the impacted mysql test 40 times
Reviewed By: ajkr
Differential Revision: D29286247
Pulled By: jay-zhuang
fbshipit-source-id: d3bd056971a19a8b012d5d0295fa045c012b3c04
Summary:
Currently, blob file checksums are incorrectly dumped as raw bytes
in the `ldb manifest_dump` output (i.e. they are not printed as hex).
The patch fixes this and also updates some test cases to reflect that
the checksum value field in `BlobFileAddition` and `SharedBlobFileMetaData`
contains the raw checksum and not a hex string.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8437
Test Plan:
`make check`
Tested using `ldb manifest_dump`
Reviewed By: akankshamahajan15
Differential Revision: D29284170
Pulled By: ltamasi
fbshipit-source-id: d11cfb3435b14cd73c8a3d3eb14fa0f9fa1d2228
Summary:
`DeleteFilesInRange()` marks deleting files to `being_compacted`
before deleting, which may cause ongoing compactions report corruption
exception or ASSERT for debug build.
Adding the missing `ComputeCompactionScore()` when `being_compacted` is set.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8434
Test Plan: Unittest
Reviewed By: ajkr
Differential Revision: D29276127
Pulled By: jay-zhuang
fbshipit-source-id: f5b223e3c1fc6d821e100e3f3442bc70c1d50cf7
Summary:
This is part of an alternative approach to https://github.com/facebook/rocksdb/issues/8316.
Unlike that approach, this one relies on key-values getting processed one by one
during compaction, and does not involve persistence.
Specifically, the patch adds a class `BlobGarbageMeter` that can track the number
and total size of blobs in a (sub)compaction's input and output on a per-blob file
basis. This information can then be used to compute the amount of additional
garbage generated by the compaction for any given blob file by subtracting the
"outflow" from the "inflow."
Note: this patch only adds `BlobGarbageMeter` and associated unit tests. I plan to
hook up this class to the input and output of `CompactionIterator` in a subsequent PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8426
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D29242250
Pulled By: ltamasi
fbshipit-source-id: 597e50ad556540e413a50e804ba15bc044d809bb
Summary:
Tracing the MultiGet information including timestamp, keys, and CF_IDs to the trace file for analyzing and replay.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8421
Test Plan: make check, add test to trace_analyzer_test
Reviewed By: anand1976
Differential Revision: D29221195
Pulled By: zhichao-cao
fbshipit-source-id: 30c677d6c39ab31ef4bbdf7e0d1fa1fd79f295ff
Summary:
**Summary**:
2 new statistics counters are added to RocksDB: `MEMTABLE_PAYLOAD_BYTES_AT_FLUSH` and `MEMTABLE_GARBAGE_BYTES_AT_FLUSH`. The former tracks how many raw bytes of useful data are present on the memtable at flush time, whereas the latter is tracks how many of these raw bytes are considered garbage, meaning that they ended up not being imported on the SSTables resulting from the flush operations.
**Unit test**: run `make db_flush_test -j$(nproc); ./db_flush_test` to run the unit test.
This executable includes 3 tests, that test support and correct stat calculations for workloads with inserts, deletes, and DeleteRanges. The parameters are set such that the workloads are performed on a single memtable, and a single SSTable is created as a result of the flush operation. The flush operation is manually called in the test file. The tests verify that the values of these 2 statistics counters introduced in this PR can be exactly predicted, showing that we have a full understanding of the underlying operations.
**Performance testing**:
`./db_bench -statistics -benchmarks=fillrandom -num=10000000` repeated 10 times.
Timing done using "date" function in a bash script.
_Results_:
Original Rocksdb fork: mean 66.6 sec, std 1.18 sec.
This feature branch: mean 67.4 sec, std 1.35 sec.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8411
Reviewed By: akankshamahajan15
Differential Revision: D29150629
Pulled By: bjlemaire
fbshipit-source-id: 7b3c2e86d50c6aa34fa50fd134282eacb543a5b1
Summary:
This PR prepopulates warm/hot data blocks which are already in memory
into block cache at the time of flush. On a flush, the data block that is
in memory (in memtables) get flushed to the device. If using Direct IO,
additional IO is incurred to read this data back into memory again, which
is avoided by enabling newly added option.
Right now, this is enabled only for flush for data blocks. We plan to
expand this option to cover compactions in the future and for other types
of blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8242
Test Plan: Add new unit test
Reviewed By: anand1976
Differential Revision: D28521703
Pulled By: akankshamahajan15
fbshipit-source-id: 7219d6958821cedce689a219c3963a6f1a9d5f05
Summary:
RocksDB logs a warning if WAL truncation on DB open fails. Its possible that on some file systems, truncation is not required and they would return ```Status::NotSupported()``` for ```ReopenWritableFile```. Don't log a warning in such cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8414
Reviewed By: akankshamahajan15
Differential Revision: D29181738
Pulled By: anand1976
fbshipit-source-id: 6e01e9117e1e4c1d67daa4dcee7fa59d06e057a7
Summary:
This is the next part of the ImmutableOptions cleanup. After changing the use of ImmutableCFOptions to ImmutableOptions, there were places in the code that had did something like "ImmutableOptions* immutable_cf_options", where "cf" referred to the "old" type.
This change simply renames the variables to match the current type. No new functionality is introduced.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8409
Reviewed By: pdillinger
Differential Revision: D29166248
Pulled By: mrambacher
fbshipit-source-id: 96de97f8e743f5c5160f02246e3ed8269556dc6f
Summary:
This reverts commit 9167ece586.
It was found to reliably trip a compaction picking conflict assertion in a MyRocks unit test. We don't understand why yet so reverting in the meantime.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8410
Test Plan: `make check -j48`
Reviewed By: jay-zhuang
Differential Revision: D29150300
Pulled By: ajkr
fbshipit-source-id: 2de8664f355d6da015e84e5fec2e3f90f49741c8
Summary:
- Added CreateFromString method to Env and FilesSystem to replace LoadEnv/Load. This method/signature is a precursor to making these classes extend Customizable.
- Added CreateFromSystem to Env. This method standardizes creating an Env from the environment variables. Previously, some places would check TEST_ENV_URI and others would also check TEST_FS_URI. Now the code is more command/standardized.
- Added CreateFromFlags to Env. These method allows Env to be create from string options (such as GFLAGS options) in a more standard way.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8174
Reviewed By: zhichao-cao
Differential Revision: D28999603
Pulled By: mrambacher
fbshipit-source-id: 88e6911e7e91f908458a7fe10a20e93ecbc275fb
Summary:
(1)Make CompactionService derived from Customizable by defining two extra functions that are needed, as described in customizable.h comment section
(2)Revise the MyTestCompactionService class in compaction_service_test.cc to satisfy the class inheritance requirement
(3)Specify namespace of ToString() in compaction_service_test.cc to avoid function collision with CompactionService's ancestor classes
Test did:
make -j24 compaction_service_test
./compaction_service_test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8395
Reviewed By: jay-zhuang
Differential Revision: D29076068
Pulled By: hx235
fbshipit-source-id: c130100fa466939b3137e917f5fdc4b2ae8e37d4
Summary:
If the block Cache is full with strict_capacity_limit=false,
then our CacheEntryStatsCollector could be immediately evicted on
release, so iterating through column families with shared block cache
could trigger re-scan for each CF. This change fixes that problem by
pinning the CacheEntryStatsCollector from InternalStats so that it's not
evicted.
I had originally thought that this object could participate in LRU like
everything else, but even though a re-load+re-scan only touches memory,
it can be orders of magnitude more expensive than other cache misses.
One service in Facebook has scans that take ~20s over 100GB block cache
that is mostly 4KB entries. (The up-side of this bug and https://github.com/facebook/rocksdb/issues/8369 is that
we had a natural experiment on the effect on some service metrics even
with block cache scans running continuously in the background--a kind
of worst case scenario. Metrics like latency were not affected enough
to trigger warnings.)
Other smaller fixes:
20s is already a sizable portion of 600s stats dump period, or 180s
default max age to force re-scan, so added logic to ensure that (for
each block cache) we don't spend more than 0.2% of our background thread
time scanning it. Nevertheless, "foreground" requests for cache entry
stats (calls to `db->GetMapProperty(DB::Properties::kBlockCacheEntryStats)`)
are permitted to consume more CPU.
Renamed field to cache_entry_stats_ to match code style.
This change is intended for patching in 6.21 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8385
Test Plan:
unit test expanded to cover new logic (detect regression),
some manual testing with db_bench
Reviewed By: ajkr
Differential Revision: D29042759
Pulled By: pdillinger
fbshipit-source-id: 236faa902397f50038c618f50fbc8cf3f277308c
Summary:
Recalculate the total size after generate new sst files.
New generated files might have different size as the previous time which
could cause the test failed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8396
Test Plan:
```
gtest-parallel ./db_compaction_test
--gtest_filter=DBCompactionTest.ManualCompactionMax -r 1000 -w 100
```
Reviewed By: akankshamahajan15
Differential Revision: D29083299
Pulled By: jay-zhuang
fbshipit-source-id: 49d4bd619cefc0f9a1f452f8759ff4c2ba1b6fdb
Summary:
The subcompaction boundary picking logic does not currently guarantee
that all user keys that differ only by timestamp get processed by the same
subcompaction. This can cause issues with the `CompactionIterator` state
machine: for instance, one subcompaction that processes a subset of such KVs
might drop a tombstone based on the KVs it sees, while in reality the
tombstone might not have been eligible to be optimized out.
(See also https://github.com/facebook/rocksdb/issues/6645, which adjusted the way compaction inputs are picked for the
same reason.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8393
Test Plan: Ran `make check` and the crash test script with timestamps enabled.
Reviewed By: jay-zhuang
Differential Revision: D29071635
Pulled By: ltamasi
fbshipit-source-id: f6c72442122b4e581871e096fabe3876a9e8a5a6
Summary:
DBImpl::DumpStats is supposed to do this:
Dump DB stats to LOG
For each CF, dump CFStatsNoFileHistogram to LOG
For each CF, dump CFFileHistogram to LOG
Instead, due to a longstanding bug from 2017 (https://github.com/facebook/rocksdb/issues/2126), it would dump
CFStats, which includes both CFStatsNoFileHistogram and CFFileHistogram,
in both loops, resulting in near-duplicate output.
This fixes the bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8380
Test Plan: Manual inspection of LOG after db_bench
Reviewed By: jay-zhuang
Differential Revision: D29017535
Pulled By: pdillinger
fbshipit-source-id: 3010604c4a629a80347f129cd746ce9b0d0cbda6
Summary:
In the current logic, any IO Error with retryable flag == true will be handled by the special logic and in most cases, StartRecoverFromRetryableBGIOError will be called to do the auto resume. If the NoSpace error with retryable flag is set during WAL write, it is mapped as a hard error, which will trigger the auto recovery. During the recover process, if write continues and append to the WAL, the write process sees that bg_error is set to HardError and it calls WriteStatusCheck(), which calls SetBGError() with Status (not IOStatus). This will redirect to the regular SetBGError interface, in which recovery_error_ will be set to the corresponding error. With the recovery_error_ set, the auto resume thread created in StartRecoverFromRetryableBGIOError will keep failing as long as user keeps trying to write.
To fix this issue. All the NoSpace error (no matter retryable flag is set or not) will be redirect to the regular SetBGError, and RecoverFromNoSpace() will do the recovery job which calls SstFileManager::StartErrorRecovery().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8376
Test Plan: make check and added the new testing case
Reviewed By: anand1976
Differential Revision: D29071828
Pulled By: zhichao-cao
fbshipit-source-id: 7171d7e14cc4620fdab49b7eff7a2fe9a89942c2
Summary:
This PR add support for Merge operation in Integrated BlobDB with base values(i.e DB::Put). Merged values can be retrieved through DB::Get, DB::MultiGet, DB::GetMergeOperands and Iterator operation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8292
Test Plan: Add new unit tests
Reviewed By: ltamasi
Differential Revision: D28415896
Pulled By: akankshamahajan15
fbshipit-source-id: e9b3478bef51d2f214fb88c31ed3c8d2f4a531ff
Summary:
Changed fprintf function to fputc in ApplyVersionEdit, and replaced null characters with whitespaces.
Added unit test in ldb_test.py - verifies that manifest_dump --verbose output is correct when keys and values containing null characters are inserted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8378
Reviewed By: pdillinger
Differential Revision: D29034584
Pulled By: bjlemaire
fbshipit-source-id: 50833687a8a5f726e247c38457eadc3e6dbab862
Summary:
Currently, we either use the file system inode or a monotonically incrementing runtime ID as the block cache key prefix. However, if we use a monotonically incrementing runtime ID (in the case that the file system does not support inode id generation), in some cases, it cannot ensure uniqueness (e.g., we have secondary cache migrated from host to host). We use DbSessionID (20 bytes) + current file number (at most 10 bytes) as the new cache block key prefix when the secondary cache is enabled. So can accommodate scenarios such as transfer of cache state across hosts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8360
Test Plan: add the test to lru_cache_test
Reviewed By: pdillinger
Differential Revision: D29006215
Pulled By: zhichao-cao
fbshipit-source-id: 6cff686b38d83904667a2bd39923cd030df16814
Jay Zhuang