Summary:
Enforce the contract of SingleDelete so that they are not mixed with
Delete for the same key. Otherwise, it will lead to undefined behavior.
See https://github.com/facebook/rocksdb/wiki/Single-Delete#notes.
Also fix unit tests and write-unprepared.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9888
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D35837817
Pulled By: riversand963
fbshipit-source-id: acd06e4dcba8cb18df92b44ed18c57e10e5a7635
Summary:
Adds more coverage to `MultiOpsTxnsStressTest` with a focus on write-prepared transactions.
1. Add a hack to manually evict commit cache entries. We currently cannot assign small values to `wp_commit_cache_bits` because it requires a prepared transaction to commit within a certain range of sequence numbers, otherwise it will throw.
2. Add coverage for commit-time-write-batch. If write policy is write-prepared, we need to set `use_only_the_last_commit_time_batch_for_recovery` to true.
3. After each flush/compaction, verify data consistency. This is possible since data size can be small: default numbers of primary/secondary keys are just 1000.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9829
Test Plan:
```
TEST_TMPDIR=/dev/shm/rocksdb_crashtest_blackbox/ make blackbox_crash_test_with_multiops_wp_txn
```
Reviewed By: pdillinger
Differential Revision: D35806678
Pulled By: riversand963
fbshipit-source-id: d7fde7a29fda0fb481a61f553e0ca0c47da93616
Summary:
The current locktree implementation stores the address of the
PessimisticTransactions object as the TXNID. However, when a transaction
is blocked on a lock, it records the list of waitees with conflicting
locks using the rocksdb assigned TransactionID. This is performed by
calling GetID() on PessimisticTransactions objects of the waitees,
and then recorded in the waiter's list.
However, there is no guarantee the objects are valid when recording the
waitee list during the conflict callbacks because the waitee
could have released the lock and freed the PessimisticTransactions
object.
The waitee/txnid values are only valid PessimisticTransaction objects
while the mutex for the root of the locktree is held.
The simplest fix for this problem is to use the address of the
PessimisticTransaction as the TransactionID so that it is consistent
with its usage in the locktree. The TXNID is only converted back to a
PessimisticTransaction for the report_wait callbacks. Since
these callbacks are now all made within the critical section where the
lock_request queue mutx is held, these conversions will be safe.
Otherwise, only the uint64_t TXNID of the waitee is registerd
with the waiter transaction. The PessimisitcTransaction object of the
waitee is never referenced.
The main downside of this approach is the TransactionID will not change
if the PessimisticTransaction object is reused for new transactions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9898
Test Plan:
Add a new test case and run unit tests.
Also verified with MyRocks workloads using range locks that the
crash no longer happens.
Reviewed By: riversand963
Differential Revision: D35950376
Pulled By: hermanlee
fbshipit-source-id: 8c9cae272e23e487fc139b6a8ed5b8f8f24b1570
Summary:
This PR does not affect write-committed.
Add a member, `rollback_deletion_type_callback` to TransactionDBOptions
so that a write-prepared transaction, when rolling back, can call this
callback to decide if a `Delete` or `SingleDelete` should be used to
cancel a prior `Put` written to the database during prepare phase.
The purpose of this PR is to prevent mixing `Delete` and `SingleDelete`
for the same key, causing undefined behaviors. Without this PR, the
following can happen:
```
// The application always issues SingleDelete when deleting keys.
txn1->Put('a');
txn1->Prepare(); // writes to memtable and potentially gets flushed/compacted to Lmax
txn1->Rollback(); // inserts DELETE('a')
txn2->Put('a');
txn2->Commit(); // writes to memtable and potentially gets flushed/compacted
```
In the database, we may have
```
L0: [PUT('a', s=100)]
L1: [DELETE('a', s=90)]
Lmax: [PUT('a', s=0)]
```
If a compaction compacts L0 and L1, then we have
```
L1: [PUT('a', s=100)]
Lmax: [PUT('a', s=0)]
```
If a future transaction issues a SingleDelete, we have
```
L0: [SD('a', s=110)]
L1: [PUT('a', s=100)]
Lmax: [PUT('a', s=0)]
```
Then, a compaction including L0, L1 and Lmax leads to
```
Lmax: [PUT('a', s=0)]
```
which is incorrect.
Similar bugs reported and addressed in
https://github.com/cockroachdb/pebble/issues/1255. Based on our team's
current priority, we have decided to take this approach for now. We may
come back and revisit in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9873
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D35762170
Pulled By: riversand963
fbshipit-source-id: b28d56eefc786b53c9844b9ef4a7807acdd82c8d
Summary:
Especially after updating to C++17, I don't see a compelling case for
*requiring* any folly components in RocksDB. I was able to purge the existing
hard dependencies, and it can be quite difficult to strip out non-trivial components
from folly for use in RocksDB. (The prospect of doing that on F14 has changed
my mind on the best approach here.)
But this change creates an optional integration where we can plug in
components from folly at compile time, starting here with F14FastMap to replace
std::unordered_map when possible (probably no public APIs for example). I have
replaced the biggest CPU users of std::unordered_map with compile-time
pluggable UnorderedMap which will use F14FastMap when USE_FOLLY is set.
USE_FOLLY is always set in the Meta-internal buck build, and a simulation of
that is in the Makefile for public CI testing. A full folly build is not needed, but
checking out the full folly repo is much simpler for getting the dependency,
and anything else we might want to optionally integrate in the future.
Some picky details:
* I don't think the distributed mutex stuff is actually used, so it was easy to remove.
* I implemented an alternative to `folly::constexpr_log2` (which is much easier
in C++17 than C++11) so that I could pull out the hard dependencies on
`ConstexprMath.h`
* I had to add noexcept move constructors/operators to some types to make
F14's complainUnlessNothrowMoveAndDestroy check happy, and I added a
macro to make that easier in some common cases.
* Updated Meta-internal buck build to use folly F14Map (always)
No updates to HISTORY.md nor INSTALL.md as this is not (yet?) considered a
production integration for open source users.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9546
Test Plan:
CircleCI tests updated so that a couple of them use folly.
Most internal unit & stress/crash tests updated to use Meta-internal latest folly.
(Note: they should probably use buck but they currently use Makefile.)
Example performance improvement: when filter partitions are pinned in cache,
they are tracked by PartitionedFilterBlockReader::filter_map_ and we can build
a test that exercises that heavily. Build DB with
```
TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters
```
and test with (simultaneous runs with & without folly, ~20 times each to see
convergence)
```
TEST_TMPDIR=/dev/shm/rocksdb ./db_bench_folly -readonly -use_existing_db -benchmarks=readrandom -num=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters -duration=40 -pin_l0_filter_and_index_blocks_in_cache
```
Average ops/s no folly: 26229.2
Average ops/s with folly: 26853.3 (+2.4%)
Reviewed By: ajkr
Differential Revision: D34181736
Pulled By: pdillinger
fbshipit-source-id: ffa6ad5104c2880321d8a1aa7187e00ab0d02e94
Summary:
For write-prepared/write-unprepared transactions,
GetCommitTimeWriteBatch() can be used only if the transaction is started
with `TransactionOptions::use_only_the_last_commit_time_batch_for_recovery` set
to true. Otherwise, it is possible that multiple uncommitted versions of the
same key exist in the database. During bottommost compaction, RocksDB may
set the sequence numbers of both to zero once they become committed, causing
output SST file to have two identical internal keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9794
Test Plan:
make check
pay special attention to the following
```
transaction_test --gtest_filter=MySQLStyleTransactionTest/MySQLStyleTransactionTest.TransactionStressTest/*
```
Reviewed By: lth
Differential Revision: D35327214
Pulled By: riversand963
fbshipit-source-id: 3bae00a28359c10e96e4c6f676d20de5610d8a0f
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9629
Pessimistic transactions use pessimistic concurrency control, i.e. locking. Keys are
locked upon first operation that writes the key or has the intention of writing. For example,
`PessimisticTransaction::Put()`, `PessimisticTransaction::Delete()`,
`PessimisticTransaction::SingleDelete()` will write to or delete a key, while
`PessimisticTransaction::GetForUpdate()` is used by application to indicate
to RocksDB that the transaction has the intention of performing write operation later
in the same transaction.
Pessimistic transactions support two-phase commit (2PC). A transaction can be
`Prepared()`'ed and then `Commit()`. The prepare phase is similar to a promise: once
`Prepare()` succeeds, the transaction has acquired the necessary resources to commit.
The resources include locks, persistence of WAL, etc.
Write-committed transaction is the default pessimistic transaction implementation. In
RocksDB write-committed transaction, `Prepare()` will write data to the WAL as a prepare
section. `Commit()` will write a commit marker to the WAL and then write data to the
memtables. While writing to the memtables, different keys in the transaction's write batch
will be assigned different sequence numbers in ascending order.
Until commit/rollback, the transaction holds locks on the keys so that no other transaction
can write to the same keys. Furthermore, the keys' sequence numbers represent the order
in which they are committed and should be made visible. This is convenient for us to
implement support for user-defined timestamps.
Since column families with and without timestamps can co-exist in the same database,
a transaction may or may not involve timestamps. Based on this observation, we add two
optional members to each `PessimisticTransaction`, `read_timestamp_` and
`commit_timestamp_`. If no key in the transaction's write batch has timestamp, then
setting these two variables do not have any effect. For the rest of this commit, we discuss
only the cases when these two variables are meaningful.
read_timestamp_ is used mainly for validation, and should be set before first call to
`GetForUpdate()`. Otherwise, the latter will return non-ok status. `GetForUpdate()` calls
`TryLock()` that can verify if another transaction has written the same key since
`read_timestamp_` till this call to `GetForUpdate()`. If another transaction has indeed
written the same key, then validation fails, and RocksDB allows this transaction to
refine `read_timestamp_` by increasing it. Note that a transaction can still use `Get()`
with a different timestamp to read, but the result of the read should not be used to
determine data that will be written later.
commit_timestamp_ must be set after finishing writing and before transaction commit.
This applies to both 2PC and non-2PC cases. In the case of 2PC, it's usually set after
prepare phase succeeds.
We currently require that the commit timestamp be chosen after all keys are locked. This
means we disallow the `TransactionDB`-level APIs if user-defined timestamp is used
by the transaction. Specifically, calling `PessimisticTransactionDB::Put()`,
`PessimisticTransactionDB::Delete()`, `PessimisticTransactionDB::SingleDelete()`,
etc. will return non-ok status because they specify timestamps before locking the keys.
Users are also prompted to use the `Transaction` APIs when they receive the non-ok status.
Reviewed By: ltamasi
Differential Revision: D31822445
fbshipit-source-id: b82abf8e230216dc89cc519564a588224a88fd43
Summary:
This PR supports inserting keys to a `WriteBatchWithIndex` for column families that enable user-defined timestamps
and reading the keys back. **The index does not have timestamps.**
Writing a key to WBWI is unchanged, because the underlying WriteBatch already supports it.
When reading the keys back, we need to make sure to distinguish between keys with and without timestamps before
comparison.
When user calls `GetFromBatchAndDB()`, no timestamp is needed to query the batch, but a timestamp has to be
provided to query the db. The assumption is that data in the batch must be newer than data from the db.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9603
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D34354849
Pulled By: riversand963
fbshipit-source-id: d25d1f84e2240ce543e521fa30595082fb8db9a0
Summary:
The following sequence of events can cause silent data loss for write-committed
transactions.
```
Time thread 1 bg flush
| db->Put("a")
| txn = NewTxn()
| txn->Put("b", "v")
| txn->Prepare() // writes only to 5.log
| db->SwitchMemtable() // memtable 1 has "a"
| // close 5.log,
| // creates 8.log
| trigger flush
| pick memtable 1
| unlock db mutex
| write new sst
| txn->ctwb->Put("gtid", "1") // writes 8.log
| txn->Commit() // writes to 8.log
| // writes to memtable 2
| compute min_log_number_to_keep_2pc, this
| will be 8 (incorrect).
|
| Purge obsolete wals, including 5.log
|
V
```
At this point, writes of txn exists only in memtable. Close db without flush because db thinks the data in
memtable are backed by log. Then reopen, the writes are lost except key-value pair {"gtid"->"1"},
only the commit marker of txn is in 8.log
The reason lies in `PrecomputeMinLogNumberToKeep2PC()` which calls `FindMinPrepLogReferencedByMemTable()`.
In the above example, when bg flush thread tries to find obsolete wals, it uses the information
computed by `PrecomputeMinLogNumberToKeep2PC()`. The return value of `PrecomputeMinLogNumberToKeep2PC()`
depends on three components
- `PrecomputeMinLogNumberToKeepNon2PC()`. This represents the WAL that has unflushed data. As the name of this method suggests, it does not account for 2PC. Although the keys reside in the prepare section of a previous WAL, the column family references the current WAL when they are actually inserted into the memtable during txn commit.
- `prep_tracker->FindMinLogContainingOutstandingPrep()`. This represents the WAL with a prepare section but the txn hasn't committed.
- `FindMinPrepLogReferencedByMemTable()`. This represents the WAL on which some memtables (mutable and immutable) depend for their unflushed data.
The bug lies in `FindMinPrepLogReferencedByMemTable()`. Originally, this function skips checking the column families
that are being flushed, but the unit test added in this PR shows that they should not be. In this unit test, there is
only the default column family, and one of its memtables has unflushed data backed by a prepare section in 5.log.
We should return this information via `FindMinPrepLogReferencedByMemTable()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9571
Test Plan:
```
./transaction_test --gtest_filter=*/TransactionTest.SwitchMemtableDuringPrepareAndCommit_WC/*
make check
```
Reviewed By: siying
Differential Revision: D34235236
Pulled By: riversand963
fbshipit-source-id: 120eb21a666728a38dda77b96276c6af72b008b1
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9562
With per-transaction `read_timestamp_`, it is possible to perform transaction validation after
locking a key in addition to sequence-based validation. Specifically, if a transaction has a
read_timestamp, then we perform timestamp-based validation as well after the key is locked
via `GetForUpdate()`. This is to make sure that no other transaction has modified the key and
committed successfully since the read timestamp (but before the locking operation) which
represents a consistent view of the database.
Reviewed By: ltamasi
Differential Revision: D31822034
fbshipit-source-id: c6f1828b7fc23e4f85e2d1ed73ff51464a058d91
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9537
Add `Transaction::SetReadTimestampForValidation()` and
`Transaction::SetCommitTimestamp()` APIs with default implementation
returning `Status::NotSupported()`. Currently, calling these two APIs do not
have any effect.
Also add checks to `PessimisticTransactionDB`
to enforce that column families in the same db either
- disable user-defined timestamp
- enable 64-bit timestamp
Just to clarify, a `PessimisticTransactionDB` can have some column families without
timestamps as well as column families that enable timestamp.
Each `PessimisticTransaction` can have two optional timestamps, `read_timestamp_`
used for additional validation and `commit_timestamp_` which denotes when the transaction commits.
For now, we are going to support `WriteCommittedTxn` (in a series of subsequent PRs)
Once set, we do not allow decreasing `read_timestamp_`. The `commit_timestamp_` must be
greater than `read_timestamp_` for each transaction and must be set before commit, unless
the transaction does not involve any column family that enables user-defined timestamp.
TransactionDB builds on top of RocksDB core `DB` layer. Though `DB` layer assumes
that user-defined timestamps are byte arrays, `TransactionDB` uses uint64_t to store
timestamps. When they are passed down, they are still interpreted as
byte-arrays by `DB`.
Reviewed By: ltamasi
Differential Revision: D31567959
fbshipit-source-id: b0b6b69acab5d8e340cf174f33e8b09f1c3d3502
Summary:
ajkr reminded me that we have a rule of not including per-kv related data in `WriteOptions`.
Namely, `WriteOptions` should not include information about "what-to-write", but should just
include information about "how-to-write".
According to this rule, `WriteOptions::timestamp` (experimental) is clearly a violation. Therefore,
this PR removes `WriteOptions::timestamp` for compliance.
After the removal, we need to pass timestamp info via another set of APIs. This PR proposes a set
of overloaded functions `Put(write_opts, key, value, ts)`, `Delete(write_opts, key, ts)`, and
`SingleDelete(write_opts, key, ts)`. Planned to add `Write(write_opts, batch, ts)`, but its complexity
made me reconsider doing it in another PR (maybe).
For better checking and returning error early, we also add a new set of APIs to `WriteBatch` that take
extra `timestamp` information when writing to `WriteBatch`es.
These set of APIs in `WriteBatchWithIndex` are currently not supported, and are on our TODO list.
Removed `WriteBatch::AssignTimestamps()` and renamed `WriteBatch::AssignTimestamp()` to
`WriteBatch::UpdateTimestamps()` since this method require that all keys have space for timestamps
allocated already and multiple timestamps can be updated.
The constructor of `WriteBatch` now takes a fourth argument `default_cf_ts_sz` which is the timestamp
size of the default column family. This will be used to allocate space when calling APIs that do not
specify a column family handle.
Also, updated `DB::Get()`, `DB::MultiGet()`, `DB::NewIterator()`, `DB::NewIterators()` methods, replacing
some assertions about timestamp to returning Status code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8946
Test Plan:
make check
./db_bench -benchmarks=fillseq,fillrandom,readrandom,readseq,deleterandom -user_timestamp_size=8
./db_stress --user_timestamp_size=8 -nooverwritepercent=0 -test_secondary=0 -secondary_catch_up_one_in=0 -continuous_verification_interval=0
Make sure there is no perf regression by running the following
```
./db_bench_opt -db=/dev/shm/rocksdb -use_existing_db=0 -level0_stop_writes_trigger=256 -level0_slowdown_writes_trigger=256 -level0_file_num_compaction_trigger=256 -disable_wal=1 -duration=10 -benchmarks=fillrandom
```
Before this PR
```
DB path: [/dev/shm/rocksdb]
fillrandom : 1.831 micros/op 546235 ops/sec; 60.4 MB/s
```
After this PR
```
DB path: [/dev/shm/rocksdb]
fillrandom : 1.820 micros/op 549404 ops/sec; 60.8 MB/s
```
Reviewed By: ltamasi
Differential Revision: D33721359
Pulled By: riversand963
fbshipit-source-id: c131561534272c120ffb80711d42748d21badf09
Summary:
Range Locking supports Lock Escalation. Lock Escalation is invoked when
lock memory is nearly exhausted and it reduced the amount of memory used
by joining adjacent locks.
Bridging the gap between certain locks has adverse effects. For example,
in MyRocks it is not a good idea to bridge the gap between locks in
different indexes, as that get the lock to cover large portions of
indexes, or even entire indexes.
Resolve this by introducing Escalation Barrier. The escalation process
will call the user-provided barrier callback function:
bool(const Endpoint& a, const Endpoint& b)
If the function returns true, there's a barrier between a and b and Lock
Escalation will not try to bridge the gap between a and b.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9290
Reviewed By: akankshamahajan15
Differential Revision: D33486753
Pulled By: riversand963
fbshipit-source-id: f97910b67aba0579ea1d35f523ca6863d3dd018e
Summary:
As title.
This is part of an fb-internal task.
First, remove all `using namespace` statements if applicable.
Next, utilize multiple build platforms and see if anything is broken.
Should anything become broken, fix the compilation errors with as little extra change as possible.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9369
Test Plan:
internal build and make check
make clean && make static_lib && cd examples && make all
Reviewed By: pdillinger
Differential Revision: D33517260
Pulled By: riversand963
fbshipit-source-id: 3fc4ce6402a073421dfd9a9b2d1c79441dca7a40
Summary:
locktree is a module providing Range Locking. It has a counter for
the number of times a lock acquisition request was blocked by an
existing conflicting lock and had to wait for it to be released.
Expose this counter in RangeLockManagerHandle::Counters::lock_wait_count.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9289
Reviewed By: jay-zhuang
Differential Revision: D33079182
Pulled By: riversand963
fbshipit-source-id: 25b1a362d9da247536ab5007bd15900b319f139e
Summary:
Context:
[Rapid thread creation and deletion](https://github.com/facebook/rocksdb/blob/6.27.fb/utilities/transactions/write_prepared_transaction_test.cc#L439-L444) in `SnapshotConcurrentAccessTest.SnapshotConcurrentAcces` inside a [potentially big loop](https://github.com/facebook/rocksdb/blob/6.27.fb/utilities/transactions/write_prepared_transaction_test.cc#L1238-L1248) can lead to heavy-loading the system with many threads due to delay in actually cleaning up thread's resource in the kernel sometime. We ran into some [flaky failure](https://app.circleci.com/pipelines/github/facebook/rocksdb/10383/workflows/136f1005-80a9-4515-aee9-fe36ac6462a1/jobs/253289) in CI and reproduced it by below:
- Command
```
Added `ROCKSDB_NAMESPACE::port::InstallStackTraceHandler();` like https://github.com/facebook/rocksdb/pull/9276
DEBUG_LEVEL=2 make -j56 write_prepared_transaction_test
GTEST_CATCH_EXCEPTIONS=0 ~/gtest-parallel/gtest-parallel -r 200 -w 200 ./write_prepared_transaction_test --gtest_filter=TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1
```
- Stack, where `write_prepared_transaction_test.cc:442` in `https://github.com/facebook/rocksdb/issues/9` points to thread creation
```
[ RUN ] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1
....terminate called after throwing an instance of 'std::system_error'
what(): Resource temporarily unavailable
Received signal 6 (Aborted)
#0 /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x38) [0x7fc114f39438]
...
https://github.com/facebook/rocksdb/issues/7 /usr/lib/x86_64-linux-gnu/libstdc++.so.6(+0xb8e73) [0x7fc1158a5e73] ?? ??:0
https://github.com/facebook/rocksdb/issues/8 ./write_prepared_transaction_test() [0x4ca86c] std:🧵:thread<rocksdb::WritePreparedTransactionTestBase::SnapshotConcurrentAccessTestInternal(rocksdb::WritePreparedTxnDB*, std::vector<unsigned long, std::allocator<unsigned long> > const&, std::vector<unsigned long, std::allocator<unsigned long> const&, rocksdb::WritePreparedTxnDB::CommitEntry&, unsigned long&, unsigned long, unsigned long, unsigned long, unsigned long)::{lambda()https://github.com/facebook/rocksdb/issues/1}>(rocksdb::WritePreparedTransactionTestBase::SnapshotConcurrentAccessTestInternal(rocksdb::WritePreparedTxnDB*, s d::vector<unsigned long, std::allocator<unsigned long> > const&, std::vector<unsigned long, std::allocator<unsigned long> > const&, rocksdb::WritePreparedTxnDB::CommitEntry&, unsigned long&, unsigned long, unsigned long, unsigned long, unsigned long)::{l mbda()https://github.com/facebook/rocksdb/issues/1}&&) /usr/include/c++/5/thread:137 (discriminator 4)
https://github.com/facebook/rocksdb/issues/9 ./write_prepared_transaction_test() [0x4bb80c] rocksdb::WritePreparedTransactionTestBase::SnapshotConcurrentAccessTestInternal(rocksdb::WritePreparedTxnDB*, std::vector<unsigned long, std::allocator<unsigned long> > const&, std::vector<unsigned long, std::allocator<unsigned long> > const&, rocksdb::W itePreparedTxnDB::CommitEntry&, unsigned long&, unsigned long, unsigned long, unsigned long, unsigned long) /home/circleci/project/utilities/transactions/write_prepared_transaction_test.cc:442
https://github.com/facebook/rocksdb/issues/10 ./write_prepared_transaction_test() [0x4407b6] rocksdb::SnapshotConcurrentAccessTest_SnapshotConcurrentAccess_Test::TestBody() /home/circleci/project/utilities/transactions/write_prepared_transaction_test.cc:1244
...
[109/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 returned/aborted with exit code -6 (34462 ms)
```
- Move thread 2's work into current thread to avoid half of the thread creation cuz there is no difference in doing so. We expect this can make the thread-creation error less often, even though we can't gurantee it from happening again. Considering this is a trivial change with positive impact, it's still worth landing and monitor if it's enough to solve the problem in reality.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9281
Test Plan:
Before the change, repeating the test 200 times with 200 workers failed
`~/gtest-parallel/gtest-parallel -r 200 -w 200 ./write_prepared_transaction_test --gtest_filter=TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1`
```
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from TwoWriteQueues/SnapshotConcurrentAccessTest
[ RUN ] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1
..unknown file: Failure
C++ exception with description "Resource temporarily unavailable" thrown in the test body.
[ FAILED ] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1, where GetParam() = (false, true, 1, 0, 1, 20) (11882 ms)
[----------] 1 test from TwoWriteQueues/SnapshotConcurrentAccessTest (11882 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (11882 ms total)
[ PASSED ] 0 tests.
[ FAILED ] 1 test, listed below:
[ FAILED ] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1, where GetParam() = (false, true, 1, 0, 1, 20)
```
After the change: repeating the test 200 times with 200 workers didn't fail, even with repeating the "repeating" for 10 times like below
`for i in {1..10}; do ~/gtest-parallel/gtest-parallel -r 200 -w 200 ./write_prepared_transaction_test --gtest_filter=TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1; done`
```
[200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1
[200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1
[200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1
[200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1
[200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1
[200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1
[200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1
[200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1
[200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1
[200/200] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1
```
It does failed when repeating the test 400 times with 400 workers
`~/project$ ~/gtest-parallel/gtest-parallel -r 400 -w 400 ./write_prepared_transaction_test --gtest_filter=TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1`
```
[1/400] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1 (2928 ms)
Note: Google Test filter = TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from TwoWriteQueues/SnapshotConcurrentAccessTest
[ RUN ] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1
unknown file: Failure
C++ exception with description "std::bad_alloc" thrown in the test body.
[ FAILED ] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/1, where GetParam() = (false, true, 1, 0, 1, 20) (2597 ms)
[----------] 1 test from TwoWriteQueues/SnapshotConcurrentAccessTest (2597 ms total)
```
Reviewed By: ajkr
Differential Revision: D33026776
Pulled By: hx235
fbshipit-source-id: 509f57126392821e835e48396e5bf224f4f5dcac
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9266
This diff adds a new tag `CommitWithTimestamp`. Currently, there is no API to trigger writing
this tag to WAL, thus it is unavailable to users.
This is an ongoing effort to add user-defined timestamp support to write-committed transactions.
This diff also indicates all column families that may potentially participate in the same
transaction must either disable timestamp or have the same timestamp format, since
`CommitWithTimestamp` tag is followed by a single byte-array denoting the commit
timestamp of the transaction. We will enforce this checking in a future diff. We keep this
diff small.
Reviewed By: ltamasi
Differential Revision: D31721350
fbshipit-source-id: e1450811443647feb6ca01adec4c8aaae270ffc6
Summary:
This changes write_prepared_transaction_test under CircleCI to
print a stack trace on unhandled exception, so that we can debug rare
exceptions seen in CircleCI:
[ RUN ] TwoWriteQueues/SnapshotConcurrentAccessTest.SnapshotConcurrentAccess/24
.......unknown file: Failure
C++ exception with description "Resource temporarily unavailable" thrown in the test body.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9276
Test Plan:
manual run test with seeded 'throw', with and without
CIRCLECI=true environment variable
Reviewed By: ajkr, hx235
Differential Revision: D32996993
Pulled By: pdillinger
fbshipit-source-id: e790408ce204b676d3d84a290e41be511b203bfa
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9162
Existing TransactionUtil::CheckKeyForConflict() performs only seq-based
conflict checking. If user-defined timestamp is enabled, it should perform
conflict checking based on timestamps too.
Update TransactionUtil::CheckKey-related methods to verify the timestamp of the
latest version of a key is smaller than the read timestamp. Note that
CheckKeysForConflict() is not updated since it's used only by optimistic
transaction, and we do not plan to update it in this upcoming batch of diffs.
Existing GetLatestSequenceForKey() returns the sequence of the latest
version of a specific user key. Since we support user-defined timestamp, we
need to update this method to also return the timestamp (if enabled) of the
latest version of the key. This will be needed for snapshot validation.
Reviewed By: ltamasi
Differential Revision: D31567960
fbshipit-source-id: 2e4a14aed267435a9aa91bc632d2411c01946d44
Summary:
The individual commits in this PR should be self-explanatory.
All small and _very_ low-priority changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5896
Reviewed By: riversand963
Differential Revision: D18065108
Pulled By: mrambacher
fbshipit-source-id: 236b1a1d9d21f982cc08aa67027108dde5eaf280
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9105
The user contract of SingleDelete is that: a SingleDelete can only be issued to
a key that exists and has NOT been updated. For example, application can insert
one key `key`, and uses a SingleDelete to delete it in the future. The `key`
cannot be updated or removed using Delete.
In reality, especially when write-prepared transaction is being used, things
can get tricky. For example, a prepared transaction already writes `key` to the
memtable after a successful Prepare(). Afterwards, should the transaction
rollback, it will insert a Delete into the memtable to cancel out the prior
Put. Consider the following sequence of operations.
```
// operation sequence 1
Begin txn
Put(key)
Prepare()
Flush()
Rollback txn
Flush()
```
There will be two SSTs resulting from above. One of the contains a PUT, while
the second one contains a Delete. It is also known that releasing a snapshot
can lead to an L0 containing only a SD for a particular key. Consider the
following operations following the above block.
```
// operation sequence 2
db->Put(key)
db->SingleDelete(key)
Flush()
```
The operation sequence 2 can result in an L0 with only the SD.
Should there be a snapshot for conflict checking created before operation
sequence 1, then an attempt to compact the db may hit the assertion failure
below, because ikey_.type is Delete (from a rollback).
```
else if (clear_and_output_next_key_) {
assert(ikey_.type == kTypeValue || ikey_.type == kTypeBlobIndex);
}
```
To fix the assertion failure, we can skip the SingleDelete if we detect an
earlier Delete in the same snapshot interval.
Reviewed By: ltamasi
Differential Revision: D32056848
fbshipit-source-id: 23620a91e28562d91c45cf7e95f414b54b729748
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9060
RocksDB bottommost level compaction may zero out an internal key's sequence if
the key's sequence is in the earliest_snapshot.
In write-prepared transaction, checking the visibility of a certain sequence in
a specific released snapshot may return a "snapshot released" result.
Therefore, it is possible, after a certain sequence of events, a PUT has its
sequence zeroed out, but a subsequent SingleDelete of the same key will still
be output with its original sequence. This violates the ascending order of
keys and leads to incorrect result.
The solution is to use an extra variable `last_key_seq_zeroed_` to track the
information about visibility in earliest snapshot. With this variable, we can
know for sure that a SingleDelete is in the earliest snapshot even if the said
snapshot is released during compaction before processing the SD.
Reviewed By: ltamasi
Differential Revision: D31813016
fbshipit-source-id: d8cff59d6f34e0bdf282614034aaea99be9174e1
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9061
In write-prepared txn, checking a sequence's visibility in a released (old)
snapshot may return "Snapshot released". Suppose we have two snapshots:
```
earliest_snap < earliest_write_conflict_snap
```
If we release `earliest_write_conflict_snap` but keep `earliest_snap` during
bottommost level compaction, then it is possible that certain sequence of
events can lead to a PUT being seq-zeroed followed by a SingleDelete of the
same key. This violates the ascending order of keys, and will cause data
inconsistency.
Reviewed By: ltamasi
Differential Revision: D31813017
fbshipit-source-id: dc68ba2541d1228489b93cf3edda5f37ed06f285
Summary:
This PR adds support for building on s390x including updating travis CI. It uses the previous work in https://github.com/facebook/rocksdb/pull/6168 and adds some more changes to get all current tests (make check and jni tests) to pass. The tests were run with snappy, lz4, bzip2 and zstd all compiled in.
There are a few pieces still needed to get the travis build working that I don't think I can do. adamretter is this something you could help with?
1. A prebuilt https://rocksdb-deps.s3-us-west-2.amazonaws.com/cmake/cmake-3.14.5-Linux-s390x.deb package
2. A https://hub.docker.com/r/evolvedbinary/rocksjava s390x image
Not sure if there is more required for travis. Happy to help in any way I can.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8962
Reviewed By: mrambacher
Differential Revision: D31802198
Pulled By: pdillinger
fbshipit-source-id: 683511466fa6b505f85ba5a9964a268c6151f0c2
Summary:
This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead.
Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing.
Hopefully, this sort of code hygiene cleanup will speed up the builds...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930
Reviewed By: pdillinger
Differential Revision: D31142788
Pulled By: mrambacher
fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d
Summary:
There is a corner case when using WriteUnprepared transactions when
`WriteUnpreparedTxn::Get` returns `Status::TryAgain` instead of
propagating the result of `GetFromBatchAndDB`. The patch adds
`PermitUncheckedError` to make the `ASSERT_STATUS_CHECKED` build pass in
this case as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8947
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D31125422
Pulled By: ltamasi
fbshipit-source-id: 42de51dcfa9384e032244c2b4d3f40e9a4111194
Summary:
Old typedef syntax is confusing
Most but not all changes with
perl -pi -e 's/typedef (.*) ([a-zA-Z0-9_]+);/using $2 = $1;/g' list_of_files
make format
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8751
Test Plan: existing
Reviewed By: zhichao-cao
Differential Revision: D30745277
Pulled By: pdillinger
fbshipit-source-id: 6f65f0631c3563382d43347896020413cc2366d9
Summary:
In debug mode, we are seeing assertion failure as follows
```
db/compaction/compaction_iterator.cc:980: void rocksdb::CompactionIterator::PrepareOutput(): \
Assertion `ikey_.type != kTypeDeletion && ikey_.type != kTypeSingleDeletion' failed.
```
It is caused by releasing earliest snapshot during compaction between the execution of
`NextFromInput()` and `PrepareOutput()`.
In one case, as demonstrated in unit test `WritePreparedTransaction.ReleaseEarliestSnapshotDuringCompaction_WithSD2`,
incorrect result may be returned by a following range scan if we disable assertion, as in opt compilation
level: the SingleDelete marker's sequence number is zeroed out, but the preceding PUT is also
outputted to the SST file after compaction. Due to the logic of DBIter, the PUT will not be
skipped and will be returned by iterator in range scan. https://github.com/facebook/rocksdb/issues/8661 illustrates what happened.
Fix by taking a more conservative approach: make compaction zero out sequence number only
if key is in the earliest snapshot when the compaction starts.
Another assertion failure is
```
Assertion `current_user_key_snapshot_ == last_snapshot' failed.
```
It's caused by releasing the snapshot between the PUT and SingleDelete during compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8608
Test Plan: make check
Reviewed By: jay-zhuang
Differential Revision: D30145645
Pulled By: riversand963
fbshipit-source-id: 699f58e66faf70732ad53810ccef43935d3bbe81
Summary:
This PR tries to remove some unnecessary checks as well as unreachable code blocks to
improve readability. An obvious non-public API method naming typo is also corrected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8565
Test Plan: make check
Reviewed By: lth
Differential Revision: D29963984
Pulled By: riversand963
fbshipit-source-id: cc96e8f09890e5cfe9b20eadb63bdca5484c150a
Summary:
- Added Type/CreateFromString
- Added ability to load EventListeners to DBOptions
- Since EventListeners did not previously have a Name(), defaulted to "". If there is no name, the listener cannot be loaded from the ObjectRegistry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8473
Reviewed By: zhichao-cao
Differential Revision: D29901488
Pulled By: mrambacher
fbshipit-source-id: 2d3a4aa6db1562ac03e7ad41b360e3521d486254
Summary:
Various tests had disabled valgrind due to it slowing down and timing
out (as is the case right now) the CI runs. Where a test was disabled with no comment,
I assumed slowness was the cause. For these tests that were slow under
valgrind, as well as the ones identified in https://github.com/facebook/rocksdb/issues/8352, this PR moves them
behind the compiler flag `-DROCKSDB_FULL_VALGRIND_RUN`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8475
Test Plan: running `make full_valgrind_test`, `make valgrind_test`, `make check`; will verify they appear working correctly
Reviewed By: jay-zhuang
Differential Revision: D29504843
Pulled By: ajkr
fbshipit-source-id: 2aac90749cfbd30d5ce11cb29a07a1b9314eeea7
Summary:
This reverts commit 25be1ed66a.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8438
Test Plan: Run the impacted mysql test 40 times
Reviewed By: ajkr
Differential Revision: D29286247
Pulled By: jay-zhuang
fbshipit-source-id: d3bd056971a19a8b012d5d0295fa045c012b3c04
Summary:
This reverts commit 9167ece586.
It was found to reliably trip a compaction picking conflict assertion in a MyRocks unit test. We don't understand why yet so reverting in the meantime.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8410
Test Plan: `make check -j48`
Reviewed By: jay-zhuang
Differential Revision: D29150300
Pulled By: ajkr
fbshipit-source-id: 2de8664f355d6da015e84e5fec2e3f90f49741c8
Summary:
This is a duplicate of https://github.com/facebook/rocksdb/issues/4948 by mzhaom to fix tests after rebase.
This change is a follow-up to https://github.com/facebook/rocksdb/issues/4927, which made this possible by allowing tombstone dropping/seqnum zeroing optimizations on the last key in the compaction. Now the `largest_seqno != 0` condition suffices to prevent snapshot release triggered compaction from entering an infinite loop.
The issues caused by the extraneous condition `level_and_file.second->num_deletions > 1` are:
- files could have `largest_seqno > 0` forever making it impossible to tell they cannot contain any covering keys
- it doesn't trigger compaction when there are many overwritten keys. Some MyRocks use case actually doesn't use Delete but instead calls Put with empty value to "delete" keys, so we'd like to be able to trigger compaction in this case too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8357
Test Plan: - make check
Reviewed By: jay-zhuang
Differential Revision: D28855340
Pulled By: ajkr
fbshipit-source-id: a261b51eecafec492499e6d01e8e43112f801798
Summary:
We saw the `Commit()` fail with "Operation expired" so apparently the
expiration time is too short. Increased the magnitude of the times in
this test to make flakiness less likely.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8258
Reviewed By: jay-zhuang
Differential Revision: D28177033
Pulled By: ajkr
fbshipit-source-id: 0357acee6cc14c104b6ccd39231a683a606ab130
Summary:
The WBWI has two differing modes of operation dependent on the value
of the constructor parameter `overwrite_key`.
Currently, regardless of the parameter, neither mode performs as
expected when using Merge. This PR remedies this by correctly invoking
the appropriate Merge Operator before returning results from the WBWI.
Examples of issues that exist which are solved by this PR:
## Example 1 with `overwrite_key=false`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
Get('k1')
```
Incorrectly yields `v2`, that is to say that the Merge behaves like a Put.
## Example 2 with o`verwrite_key=true`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
Get('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
## Example 3 with `overwrite_key=false`
Currently, with a database containing `('k1' -> 'v1')`, the following sequence:
```
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `v1,v2`
## Example 4 with `overwrite_key=true`
Currently, with a database containing `('k1' -> 'v1')`, the following sequence:
```
Merge('k1', 'v1')
GetFromBatchAndDB('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
## Example 5 with `overwrite_key=false`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `v1,v2`
## Example 6 with `overwrite_key=true`
Currently, from an empty database, `('k1' -> 'v1')`, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8135
Reviewed By: pdillinger
Differential Revision: D27657938
Pulled By: mrambacher
fbshipit-source-id: 0fbda6bbc66bedeba96a84786d90141d776297df
Summary:
The implementation of TransactionDB::WrapDB() and
TransactionDB::WrapStackableDB() are almost identical, except for the
type of the first argument `db`. This PR adds a new template function in
anonymous namespace, and calls it in the above two functions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8079
Test Plan: make check
Reviewed By: lth
Differential Revision: D27184575
Pulled By: riversand963
fbshipit-source-id: f2855a6db3a7e897d0d611f7050ca4b696c56a7a
Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes.
For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.
There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved.
Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:
6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found)
6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found)
PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found)
(Note that the times for 6.18 are prior to revert of the SystemClock).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033
Reviewed By: pdillinger
Differential Revision: D27014563
Pulled By: mrambacher
fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
Summary:
Fix this scenario:
trx1> acquire shared lock on $key
trx2> acquire shared lock on the same $key
trx1> attempt to acquire a unique lock on $key.
Lock acquisition will fail, and deadlock detection will start.
It will call iterate_and_get_overlapping_row_locks() which will
produce a list with two locks (shared locks by trx1 and trx2).
However the code in lock_request::build_wait_graph() was not prepared
to find the lock by the same transaction in the list of conflicting
locks. Fix it to ignore it.
(One may suggest to fix iterate_and_get_overlapping_row_locks() to not
include locks by trx1. This is not a good idea, because that function
is also used to report all locks currently held)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7938
Reviewed By: zhichao-cao
Differential Revision: D26529374
Pulled By: ajkr
fbshipit-source-id: d89cbed008db1a97a8f2351b9bfb75310750d16a
Summary:
TransactionDB uses read callback to filter out un-committed data before
a snapshot. But `MultiGet()` API doesn't use that at all, which causes
returning unwanted data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7963
Test Plan: Added unittest to reproduce
Reviewed By: anand1976
Differential Revision: D26455851
Pulled By: jay-zhuang
fbshipit-source-id: 265276698cf9d8c4cd79e3250ef10d14375bac55
Summary:
Explicitly reject all range deletions on `TransactionDB` or `OptimisticTransactionDB`, except when the user provides sufficient promises that allow us to proceed safely. The necessary promises are described in the API doc for `TransactionDB::DeleteRange()`. There is currently no way to provide enough promises to make it safe in `OptimisticTransactionDB`.
Fixes https://github.com/facebook/rocksdb/issues/7913.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7929
Test Plan: unit tests covering the cases it's permitted/rejected
Reviewed By: ltamasi
Differential Revision: D26240254
Pulled By: ajkr
fbshipit-source-id: 2834a0ce64cc3e4c3799e35b885a5e79c2f4f6d9
Summary:
Memtable bloom filter is useful in many use cases. A default value on with conservative 1.5% memory can benefit more use cases than use cases impacted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6584
Test Plan: Run all existing tests.
Reviewed By: pdillinger
Differential Revision: D20626739
fbshipit-source-id: 1dd45532b932139552519b8c2682bd954550c2f9
Yanqin Jin