Summary:
DBTest.GroupCommitTest would often fail when run under valgrind because its sleeps were insufficient to guarantee a group commit had multiple entries. Instead we can use sync point to force a leader to wait until a non-leader thread has enqueued its work, thus guaranteeing a leader can do group commit work for multiple threads.
Closes https://github.com/facebook/rocksdb/pull/3883
Differential Revision: D8079429
Pulled By: ajkr
fbshipit-source-id: 61dc50fad29d2c85547842f681288de60fa29049
Summary:
By using WritableFileWriter rather than WritableFile directly, we can buffer multiple Append() calls to one write() file system call, which will be expensive to underlying Env without its own write buffering.
Closes https://github.com/facebook/rocksdb/pull/3882
Differential Revision: D8080673
Pulled By: siying
fbshipit-source-id: e0db900cb3c178166aa738f3985db65e3ae2cf1b
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
Change `keys_` from `set<string>` to `vector<set<string>>` so that each column
family's keys are stored in one set.
ajkr When you have a chance, can you PTAL? Thanks!
Closes https://github.com/facebook/rocksdb/pull/3871
Differential Revision: D8056447
Pulled By: riversand963
fbshipit-source-id: 650d0f9cad02b1bc005fc329ad76edbf053e6386
Summary:
`RangeDelAggregator` holds the pointers returned by `BlockIter::key()` and `BlockIter::value()` so requires the data to which they point is pinned. `BlockIter::key()` points into block memory and is guaranteed to be pinned if and only if prefix encoding is disabled (or, equivalently, restart interval is set to one). I think `BlockIter::value()` is always pinned. Added an assert for these and removed the wrong TODO about increasing restart interval, which would enable key prefix encoding and break the assertion.
Closes https://github.com/facebook/rocksdb/pull/3875
Differential Revision: D8063667
Pulled By: ajkr
fbshipit-source-id: 60b5ebcc0cdd610dd6aad9e74a23378793672c41
Summary:
Right now ReverseBytewiseComparator::FindShortestSeparator() doesn't really shorten key, and ReverseBytewiseComparator::FindShortestSuccessor() seems to return wrong results. The code is confusing too as it uses BytewiseComparatorImpl::FindShortestSeparator() but the function actually won't do anything if the the first key is larger than the second.
Implement ReverseBytewiseComparator::FindShortestSeparator() and override ReverseBytewiseComparator::FindShortestSuccessor() to be empty.
Closes https://github.com/facebook/rocksdb/pull/3836
Differential Revision: D7959762
Pulled By: siying
fbshipit-source-id: 93acb621c16ce6f23e087ae4e19f7d84d1254683
Summary:
this will fix the failing clang_check test
Closes https://github.com/facebook/rocksdb/pull/3868
Differential Revision: D8050880
Pulled By: miasantreble
fbshipit-source-id: 749932e2e4025f835c961c068d601e522a126da6
Summary:
Before this PR, Iterator/InternalIterator may simultaneously have non-ok status() and Valid() = true. That state means that the last operation failed, but the iterator is nevertheless positioned on some unspecified record. Likely intended uses of that are:
* If some sst files are corrupted, a normal iterator can be used to read the data from files that are not corrupted.
* When using read_tier = kBlockCacheTier, read the data that's in block cache, skipping over the data that is not.
However, this behavior wasn't documented well (and until recently the wiki on github had misleading incorrect information). In the code there's a lot of confusion about the relationship between status() and Valid(), and about whether Seek()/SeekToLast()/etc reset the status or not. There were a number of bugs caused by this confusion, both inside rocksdb and in the code that uses rocksdb (including ours).
This PR changes the convention to:
* If status() is not ok, Valid() always returns false.
* Any seek operation resets status. (Before the PR, it depended on iterator type and on particular error.)
This does sacrifice the two use cases listed above, but siying said it's ok.
Overview of the changes:
* A commit that adds missing status checks in MergingIterator. This fixes a bug that actually affects us, and we need it fixed. `DBIteratorTest.NonBlockingIterationBugRepro` explains the scenario.
* Changes to lots of iterator types to make all of them conform to the new convention. Some bug fixes along the way. By far the biggest changes are in DBIter, which is a big messy piece of code; I tried to make it less big and messy but mostly failed.
* A stress-test for DBIter, to gain some confidence that I didn't break it. It does a few million random operations on the iterator, while occasionally modifying the underlying data (like ForwardIterator does) and occasionally returning non-ok status from internal iterator.
To find the iterator types that needed changes I searched for "public .*Iterator" in the code. Here's an overview of all 27 iterator types:
Iterators that didn't need changes:
* status() is always ok(), or Valid() is always false: MemTableIterator, ModelIter, TestIterator, KVIter (2 classes with this name anonymous namespaces), LoggingForwardVectorIterator, VectorIterator, MockTableIterator, EmptyIterator, EmptyInternalIterator.
* Thin wrappers that always pass through Valid() and status(): ArenaWrappedDBIter, TtlIterator, InternalIteratorFromIterator.
Iterators with changes (see inline comments for details):
* DBIter - an overhaul:
- It used to silently skip corrupted keys (`FindParseableKey()`), which seems dangerous. This PR makes it just stop immediately after encountering a corrupted key, just like it would for other kinds of corruption. Let me know if there was actually some deeper meaning in this behavior and I should put it back.
- It had a few code paths silently discarding subiterator's status. The stress test caught a few.
- The backwards iteration code path was expecting the internal iterator's set of keys to be immutable. It's probably always true in practice at the moment, since ForwardIterator doesn't support backwards iteration, but this PR fixes it anyway. See added DBIteratorTest.ReverseToForwardBug for an example.
- Some parts of backwards iteration code path even did things like `assert(iter_->Valid())` after a seek, which is never a safe assumption.
- It used to not reset status on seek for some types of errors.
- Some simplifications and better comments.
- Some things got more complicated from the added error handling. I'm open to ideas for how to make it nicer.
* MergingIterator - check status after every operation on every subiterator, and in some places assert that valid subiterators have ok status.
* ForwardIterator - changed to the new convention, also slightly simplified.
* ForwardLevelIterator - fixed some bugs and simplified.
* LevelIterator - simplified.
* TwoLevelIterator - changed to the new convention. Also fixed a bug that would make SeekForPrev() sometimes silently ignore errors from first_level_iter_.
* BlockBasedTableIterator - minor changes.
* BlockIter - replaced `SetStatus()` with `Invalidate()` to make sure non-ok BlockIter is always invalid.
* PlainTableIterator - some seeks used to not reset status.
* CuckooTableIterator - tiny code cleanup.
* ManagedIterator - fixed some bugs.
* BaseDeltaIterator - changed to the new convention and fixed a bug.
* BlobDBIterator - seeks used to not reset status.
* KeyConvertingIterator - some small change.
Closes https://github.com/facebook/rocksdb/pull/3810
Differential Revision: D7888019
Pulled By: al13n321
fbshipit-source-id: 4aaf6d3421c545d16722a815b2fa2e7912bc851d
Summary:
log_ contract specifies that it should not be modified unless both mutex_ and log_write_mutex_ are held. log_.erase however does that with only holding mutex_. This causes a race condition with two_write_queues since logs_.back is read with holding only log_write_mutex_ (which is correct according to logs_ contract) but logs_.erase is called concurrently. This is probably the cause of logs_.back returning nullptr in https://github.com/facebook/rocksdb/issues/3852 although I could not reproduce it.
Fixes https://github.com/facebook/rocksdb/issues/3852
Closes https://github.com/facebook/rocksdb/pull/3859
Differential Revision: D8026103
Pulled By: maysamyabandeh
fbshipit-source-id: ee394e00fe4aa520d884c5ef87981e9d6b5ccb28
Summary:
TSAN reports a false alarm for lock-order-inversion in DBWriteTest.IOErrorOnWALWritePropagateToWriteThreadFollower but Open and FlushWAL are not run concurrently. Suppressing the error by skipping FlushWAL in the test until TSAN is fixed.
The alternative would be to use
```
TSAN_OPTIONS="suppressions=tsan-suppressions.txt" ./db_write_test
```
but it does not seem straightforward to integrate it to our test infra.
Closes https://github.com/facebook/rocksdb/pull/3854
Differential Revision: D8000202
Pulled By: maysamyabandeh
fbshipit-source-id: fde33483d963a7ad84d3145123821f64960a4802
Summary:
This feature was introduced for universal compaction in cc01985d. At that point we thought it'd be used only to prevent long-running universal full compactions from blocking short-lived upper-level compactions. Now we have a level compaction user who could benefit from it since they use more expensive compression algorithm in the bottom level. So enable it for level.
Closes https://github.com/facebook/rocksdb/pull/3835
Differential Revision: D7957179
Pulled By: ajkr
fbshipit-source-id: 177285d2cef3b650b6a4d81dc5db84bc441c9fe4
Summary:
Currently manual_wal_flush if set in the options will be used only for the wal files created during wal switch. The configuration thus does not affect the first wal file. The patch fixes that and also update the related unit tests.
This PR is built on top of https://github.com/facebook/rocksdb/pull/3756
Closes https://github.com/facebook/rocksdb/pull/3824
Differential Revision: D7909153
Pulled By: maysamyabandeh
fbshipit-source-id: 024ed99d2555db06bf096c902b998e432bb7b9ce
Summary:
Previously `DBOptions::use_direct_io_for_flush_and_compaction=true` combined with `DBOptions::use_direct_reads=false` could cause RocksDB to simultaneously read from two file descriptors for the same file, where background reads used direct I/O and foreground reads used buffered I/O. Our measurements found this mixed-mode I/O negatively impacted foreground read perf, compared to when only buffered I/O was used.
This PR makes the mixed-mode I/O situation impossible by repurposing `DBOptions::use_direct_io_for_flush_and_compaction` to only apply to background writes, and `DBOptions::use_direct_reads` to apply to all reads. There is no risk of direct background direct writes happening simultaneously with buffered reads since we never read from and write to the same file simultaneously.
Closes https://github.com/facebook/rocksdb/pull/3829
Differential Revision: D7915443
Pulled By: ajkr
fbshipit-source-id: 78bcbf276449b7e7766ab6b0db246f789fb1b279
Summary:
`ReadaheadRandomAccessFile` had an unwritten assumption, which was that its wrapped file's `Read()` function always copies into the provided scratch buffer. Actually this was not true when the wrapped file was `PosixMmapReadableFile`, whose `Read()` implementation does no copying and instead returns a `Slice` pointing directly into the `mmap`'d memory region. This PR:
- prevents `ReadaheadRandomAccessFile` from ever wrapping mmap readable files
- adds an assert for the assumption `ReadaheadRandomAccessFile` makes about the wrapped file's use of scratch buffer
Closes https://github.com/facebook/rocksdb/pull/3813
Differential Revision: D7891513
Pulled By: ajkr
fbshipit-source-id: dc64a55222d6af280c39a1852ee39e9e9d7cde7d
Summary:
tsan flavor of this test occasionally times out in our test infra. The patch split the test to two, each working on half of the option range.
Before:
[ OK ] FaultTest/FaultInjectionTest.FaultTest/0 (5918 ms)
[ OK ] FaultTest/FaultInjectionTest.FaultTest/1 (5336 ms)
After:
[ OK ] FaultTest/FaultInjectionTestSplitted.FaultTest/0 (2930 ms)
[ OK ] FaultTest/FaultInjectionTestSplitted.FaultTest/1 (2676 ms)
[ OK ] FaultTest/FaultInjectionTestSplitted.FaultTest/2 (2759 ms)
[ OK ] FaultTest/FaultInjectionTestSplitted.FaultTest/3 (2546 ms)
Closes https://github.com/facebook/rocksdb/pull/3819
Differential Revision: D7894975
Pulled By: maysamyabandeh
fbshipit-source-id: 809f1411cbcc27f8aa71a6b29a16b039f51b67c9
Summary:
The origin commit #3635 will hurt performance for users who aren't using range deletions， because unneeded std::set operations, so it was reverted by commit 44653c7b7a. (see #3672)
To fix this, move the set to and add a check in , i.e., file will be added only if is non-nullptr.
The db_bench command which find the performance regression:
> ./db_bench --benchmarks=fillrandom,seekrandomwhilewriting --threads=1 --num=1000000 --reads=150000 --key_size=66 > --value_size=1262 --statistics=0 --compression_ratio=0.5 --histogram=1 --seek_nexts=1 --stats_per_interval=1 > --stats_interval_seconds=600 --max_background_flushes=4 --num_multi_db=1 --max_background_compactions=16 --seed=1522388277 > -write_buffer_size=1048576 --level0_file_num_compaction_trigger=10000 --compression_type=none
Before and after the modification, I re-run this command on the machine, the results of are as follows：
**fillrandom**
Table | P50 | P75 | P99 | P99.9 | P99.99 |
---- | --- | --- | --- | ----- | ------ |
before commit | 5.92 | 8.57 | 19.63 | 980.97 | 12196.00 |
after commit | 5.91 | 8.55 | 19.34 | 965.56 | 13513.56 |
**seekrandomwhilewriting**
Table | P50 | P75 | P99 | P99.9 | P99.99 |
---- | --- | --- | --- | ----- | ------ |
before commit | 1418.62 | 1867.01 | 3823.28 | 4980.99 | 9240.00 |
after commit | 1450.54 | 1880.61 | 3962.87 | 5429.60 | 7542.86 |
Closes https://github.com/facebook/rocksdb/pull/3800
Differential Revision: D7874245
Pulled By: ajkr
fbshipit-source-id: 2e8bec781b3f7399246babd66395c88619534a17
Summary:
Delete archive directory before WAL folder
since archive may be contained as a subfolder.
Also improve loop readability.
Closes https://github.com/facebook/rocksdb/pull/3797
Differential Revision: D7866378
Pulled By: riversand963
fbshipit-source-id: 0c45d97677ce6fbefa3f8d602ef5e2a2a925e6f5
Summary:
ManualCompactionTest.Test occasionally times out in tsan flavor of our test infra. The patch reduces the number of keys to make the test run faster. The change does not seem to negatively impact the coverage of the test.
Closes https://github.com/facebook/rocksdb/pull/3802
Differential Revision: D7865596
Pulled By: maysamyabandeh
fbshipit-source-id: b4f60e32c3ae1677e25506f71c766e33fa985785
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
Summary:
When the dummy record insertion fails, there is no need to explicitly delete the block as it will be registered for cleanup regardless.
Closes https://github.com/facebook/rocksdb/pull/3688
Differential Revision: D7537741
Pulled By: miasantreble
fbshipit-source-id: fcd3a3d3d382ee8e2c7ced0a4980e683d93a16d6
Summary:
A minor change: I wrapped TransactionLogIterator for the C API.
I needed that for the golang binding.
Closes https://github.com/facebook/rocksdb/pull/3304
Differential Revision: D6628736
Pulled By: miasantreble
fbshipit-source-id: 3374f3c64b1d7b225696b8767090917761e2f30a
Summary:
Sometimes we want to compact files as fast as possible, but don't want to set a large `max_subcompactions` in the `DBOptions` by default.
I add a `max_subcompactions` options to `CompactionOptions` so that we can choose a proper concurrency dynamically.
Closes https://github.com/facebook/rocksdb/pull/3775
Differential Revision: D7792357
Pulled By: ajkr
fbshipit-source-id: 94f54c3784dce69e40a229721a79a97e80cd6a6c
Summary:
We use `queued_for_flush_` to indicate a column family has been added to the
flush queue. Similarly and to be consistent in our naming, we need to use `queued_for_compaction_` to indicate a column family has been added to the compaction queue. In the past we used
`pending_compaction_` which can also be ambiguous.
Closes https://github.com/facebook/rocksdb/pull/3781
Differential Revision: D7790063
Pulled By: riversand963
fbshipit-source-id: 6786b11a4fcaea36dc9b4672233dbe042f921804
Summary:
With ColumnFamilyData::pending_flush_, we have the following code snippet in DBImpl::ScheedulePendingFlush
```
if (!cfd->pending_flush() && cfd->imm()->IsFlushPending()) {
...
}
```
`Pending` is ambiguous, and I feel `queued_for_flush` is a better name,
especially for the sake of readability.
Closes https://github.com/facebook/rocksdb/pull/3777
Differential Revision: D7783066
Pulled By: riversand963
fbshipit-source-id: f1bd8c8bfe5eafd2c94da0d8566c9b2b6bb57229
Summary:
sync parent directory after deleting a file in delete scheduler. Otherwise, trim speed may not be as smooth as what we want.
Closes https://github.com/facebook/rocksdb/pull/3767
Differential Revision: D7760136
Pulled By: siying
fbshipit-source-id: ec131d53b61953f09c60d67e901e5eeb2716b05f
Summary:
Currently, the `rocksdb_options_set_ratelimiter` in `c.cc` will change the input to nil, which make it is
not possible to use the shared rate limiter create by `rocksdb_ratelimiter_create` in different rocksdb option.
In this pr, I changed it to shared ptr.
Closes https://github.com/facebook/rocksdb/pull/3758
Differential Revision: D7749740
Pulled By: ajkr
fbshipit-source-id: c6121f8ca75402afdb4b295ce63c2338d253a1b5
Summary:
There's a group of stats in PerfContext for profiling the write path. They break down the write time into WAL write, memtable insert, throttling, and everything else. We use these stats a lot for figuring out the cause of slow writes.
These stats got a bit out of date and are now categorizing some interesting things as "everything else", and also do some double counting. This PR fixes it and adds two new stats: time spent waiting for other threads of the batch group, and time spent waiting for scheduling flushes/compactions. Probably these will be enough to explain all the occasional abnormally slow (multiple seconds) writes that we're seeing.
Closes https://github.com/facebook/rocksdb/pull/3602
Differential Revision: D7251562
Pulled By: al13n321
fbshipit-source-id: 0a2d0f5a4fa5677455e1f566da931cb46efe2a0d
Summary:
This reverts commit 73f21a7b21.
It breaks compatibility. When created a DB using a build with this new change, opening the DB and reading the data will fail with this error:
"Corruption: Can't access /000000.sst: IO error: while stat a file for size: /tmp/xxxx/000000.sst: No such file or directory"
This is because the dummy AddFile4 entry generated by the new code will be treated as a real entry by an older build. The older build will think there is a real file with number 0, but there isn't such a file.
Closes https://github.com/facebook/rocksdb/pull/3762
Differential Revision: D7730035
Pulled By: siying
fbshipit-source-id: f2051859eff20ef1837575ecb1e1bb96b3751e77
Summary:
1. Add a new ticker stat rocksdb.number.multiget.keys.found to track the
number of keys successfully read
2. Update rocksdb.memtable.hit/miss in DBImpl::MultiGet(). It was being done in
DBImpl::GetImpl(), but not MultiGet
Closes https://github.com/facebook/rocksdb/pull/3730
Differential Revision: D7677364
Pulled By: anand1976
fbshipit-source-id: af22bd0ef8ddc5cf2b4244b0a024e539fe48bca5
Summary:
The WriteBatch::Iterate will try with a larger sequence number if the memtable reports a duplicate. This status is specified with TryAgain status. So far the assumption was that the last entry in the batch will never return TryAgain, which is correct when WAL is created via WritePrepared since it always appends a batch separator if a natural one does not exist. However when reading a WAL generated by WriteCommitted this batch separator might not exist. Although WritePrepared is not supposed to be able to read the WAL generated by WriteCommitted we should avoid confusing scenarios in which the behavior becomes unpredictable. The path fixes that by allowing TryAgain even for the last entry of the write batch.
Closes https://github.com/facebook/rocksdb/pull/3747
Differential Revision: D7708391
Pulled By: maysamyabandeh
fbshipit-source-id: bfaddaa9b14a4cdaff6977f6f63c789a6ab1ee0d
Summary:
Fix the following gcc-8 warnings:
- conflicting C language linkage declaration [-Werror]
- writing to an object with no trivial copy-assignment [-Werror=class-memaccess]
- array subscript -1 is below array bounds [-Werror=array-bounds]
Solves https://github.com/facebook/rocksdb/issues/3716
Closes https://github.com/facebook/rocksdb/pull/3736
Differential Revision: D7684161
Pulled By: yiwu-arbug
fbshipit-source-id: 47c0423d26b74add251f1d3595211eee1e41e54a
Summary:
Right now in `SyncClosedLogs`, `CopyFile`, and `AddRecord`, where `Sync` and `Append` are invoked in a loop, the error status are not checked. This could lead to potential corruption as later calls will overwrite the error status.
Closes https://github.com/facebook/rocksdb/pull/3740
Differential Revision: D7678848
Pulled By: miasantreble
fbshipit-source-id: 4b0b412975989dfe80348f73217b9c4122a4bd77
Summary:
The reason for this initialization is that LLVM UBSAN check will fail due to
uninitialized bool. [StackOverflow post](https://stackoverflow.com/questions/31420154/runtime-error-load-of-value-127-which-is-not-a-valid-value-for-type-bool).
UBSAN log:
> ===== Running external_sst_file_basic_test
[==========] Running 7 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 7 tests from ExternalSSTFileBasicTest
[ RUN ] ExternalSSTFileBasicTest.Basic
[ OK ] ExternalSSTFileBasicTest.Basic (6 ms)
[ RUN ] ExternalSSTFileBasicTest.NoCopy
db/external_sst_file_ingestion_job.h:23:8: runtime error: load of value 253, which is not a valid value for type 'bool'
miasantreble I've tested this locally using the following command.
```
TEST_TMPDIR=/dev/shm/rocksdb COMPILE_WITH_UBSAN=1 OPT=-g make J=1 -j8 ubsan_check
```
ajkr This PR is related to your review comment in [PR](https://github.com/facebook/rocksdb/pull/3713/). It turns out that, with UBSAN enabled, we must provide a default value for boolean member variables.
Closes https://github.com/facebook/rocksdb/pull/3728
Differential Revision: D7642476
Pulled By: riversand963
fbshipit-source-id: 4c09a4b8d271151cb99ae7393db9e4ad9f29762e
Summary:
this PR fixes a few failed contbuild:
1. ASAN memory leak in Block::NewIterator (table/block.cc:429). the proper destruction of first_level_iter_ and second_level_iter_ of two_level_iterator.cc is missing from the code after the refactoring in https://github.com/facebook/rocksdb/pull/3406
2. various unused param errors introduced by https://github.com/facebook/rocksdb/pull/3662
3. updated comment for `ForceReleaseCachedEntry` to emphasize the use of `force_erase` flag.
Closes https://github.com/facebook/rocksdb/pull/3718
Reviewed By: maysamyabandeh
Differential Revision: D7621192
Pulled By: miasantreble
fbshipit-source-id: 476c94264083a0730ded957c29de7807e4f5b146
Summary:
When there are many range deletions in a range, we want to trigger manual compaction on this range to reclaim disk space as soon as possible and speed up read.
After this change, we can collect informations of range deletions and store them into user properties which can guide our manual compaction.
Closes https://github.com/facebook/rocksdb/pull/3695
Differential Revision: D7570322
Pulled By: ajkr
fbshipit-source-id: c358fa43b0aac6cc954d2eadc7d3bd8015373369
Summary:
RocksDB supports ingestion of external ssts. If ingestion_options.move_files is true, when performing ingestion, RocksDB first tries to link external ssts. If external SST file resides on a different FS, or the underlying FS does not support hard link, then RocksDB performs actual file copy. However, no matter which choice is made, current code increase bytes-written when updating compaction stats, which is inaccurate when RocksDB does NOT copy file.
Rename a sync point.
Closes https://github.com/facebook/rocksdb/pull/3713
Differential Revision: D7604151
Pulled By: riversand963
fbshipit-source-id: dd0c0d9b9a69c7d9ffceafc3d9c23371aa413586
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662
Differential Revision: D7426121
Pulled By: Dayvedde
fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
Summary:
Add `compaction_reason` as part of event log for event `compaction started`.
Add counters for each `CompactionReason`.
Closes https://github.com/facebook/rocksdb/pull/3679
Differential Revision: D7550348
Pulled By: riversand963
fbshipit-source-id: a19cff3a678c785aa5ef41aac78b9a5968fcc34d
Summary:
In `cf_options_type_info`, the deprecated options are all considered to have offset zero in the `MutableCFOptions` struct. Previously we weren't checking in `GetMutableOptionsFromStrings` whether the provided option was deprecated or not and simply writing the provided value to the offset specified by `cf_options_type_info`. That meant setting any deprecated option would overwrite the first element in the struct, which is `write_buffer_size`. `db_stress` hit this often since it calls `SetOptions` with `soft_rate_limit=0` and `hard_rate_limit=0`, which are both deprecated so cause `write_buffer_size` to be set to zero, which causes it to crash on the following assertion:
```
db_stress: db/memtable.cc:106: rocksdb::MemTable::MemTable(const rocksdb::InternalKeyComparator&, const rocksdb::ImmutableCFOptions&, const rocksdb::MutableCFOptions&, rocksdb::WriteBufferManager*, rocksdb::SequenceNumber, uint32_t): Assertion `!ShouldScheduleFlush()' failed.
```
We fix it by skipping deprecated options (and logging a warning) when users provide them to `SetOptions`. I didn't want to fail the call for compatibility reasons.
Closes https://github.com/facebook/rocksdb/pull/3700
Differential Revision: D7572596
Pulled By: ajkr
fbshipit-source-id: bd5d84e14c0c39f30c5d4c6df7c1503d2c28ecf1
Summary:
1. Remove redundant text.
2. Make terminology consistent across all comments and doc of RocksDB. Also do
our best to conform to conventions. Specifically, use 'callback' instead of
'call-back' [wikipedia](https://en.wikipedia.org/wiki/Callback_(computer_programming)).
Closes https://github.com/facebook/rocksdb/pull/3693
Differential Revision: D7560396
Pulled By: riversand963
fbshipit-source-id: ba8c251c487f4e7d1872a1a8dc680f9e35a6ffb8
Summary:
In this case, we add input files of compaction, not outputs.
Closes https://github.com/facebook/rocksdb/pull/3686
Differential Revision: D7556781
Pulled By: ajkr
fbshipit-source-id: ae135bb6eda60db8f275a9ba2d21c18aaadef5b7
Summary:
- inflate the argument passed as `max_compact_bytes_per_del_file` by a bit (10%). The intent of this argument is prevent L0 files from being intra-L0 compacted multiple times. Without compression, some intra-L0 compactions exceed this limit (and thus aren't executed), even though none of their files have gone through intra-L0 before.
- fix `FindIntraL0Compaction` as it was rejecting some valid intra-L0 compactions. In particular, `compact_bytes_per_del_file` is the work-per-deleted-file for the span [0, span_len), whereas `new_compact_bytes_per_del_file` is the work-per-deleted-file for the span [0, span_len+1). The former is more correct for checking whether we've found an eligible span.
Closes https://github.com/facebook/rocksdb/pull/3684
Differential Revision: D7530396
Pulled By: ajkr
fbshipit-source-id: cad4f50902bdc428ac9ff6fffb13eb288648d85e
Andrew Kryczka