Summary:
We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support.
Most of changes were done through following comments:
unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'`
by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147
Test Plan: See CI
Reviewed By: pdillinger
Differential Revision: D42796341
fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2
Summary:
Add option `preserve_internal_time_seconds` to preserve the internal
time information.
It's mostly for the migration of the existing data to tiered storage (
`preclude_last_level_data_seconds`). When the tiering feature is just
enabled, the existing data won't have the time information to decide if
it's hot or cold. Enabling this feature will start collect and preserve
the time information for the new data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10747
Reviewed By: siying
Differential Revision: D39910141
Pulled By: siying
fbshipit-source-id: 25c21638e37b1a7c44006f636b7d714fe7242138
Summary:
Try to align the compaction output file boundaries to the next level ones
(grandparent level), to reduce the level compaction write-amplification.
In level compaction, there are "wasted" data at the beginning and end of the
output level files. Align the file boundary can avoid such "wasted" compaction.
With this PR, it tries to align the non-bottommost level file boundaries to its
next level ones. It may cut file when the file size is large enough (at least
50% of target_file_size) and not too large (2x target_file_size).
db_bench shows about 12.56% compaction reduction:
```
TEST_TMPDIR=/data/dbbench2 ./db_bench --benchmarks=fillrandom,readrandom -max_background_jobs=12 -num=400000000 -target_file_size_base=33554432
# baseline:
Flush(GB): cumulative 25.882, interval 7.216
Cumulative compaction: 285.90 GB write, 162.36 MB/s write, 269.68 GB read, 153.15 MB/s read, 2926.7 seconds
# with this change:
Flush(GB): cumulative 25.882, interval 7.753
Cumulative compaction: 249.97 GB write, 141.96 MB/s write, 233.74 GB read, 132.74 MB/s read, 2534.9 seconds
```
The compaction simulator shows a similar result (14% with 100G random data).
As a side effect, with this PR, the SST file size can exceed the
target_file_size, but is capped at 2x target_file_size. And there will be
smaller files. Here are file size statistics when loading 100GB with the target
file size 32MB:
```
baseline this_PR
count 1.656000e+03 1.705000e+03
mean 3.116062e+07 3.028076e+07
std 7.145242e+06 8.046139e+06
```
The feature is enabled by default, to revert to the old behavior disable it
with `AdvancedColumnFamilyOptions.level_compaction_dynamic_file_size = false`
Also includes https://github.com/facebook/rocksdb/issues/1963 to cut file before skippable grandparent file. Which is for
use case like user adding 2 or more non-overlapping data range at the same
time, it can reduce the overlapping of 2 datasets in the lower levels.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10655
Reviewed By: cbi42
Differential Revision: D39552321
Pulled By: jay-zhuang
fbshipit-source-id: 640d15f159ab0cd973f2426cfc3af266fc8bdde2
Summary:
Change tiered compaction feature from `bottommost_temperture` to
`last_level_temperture`. The old option is kept for migration purpose only,
which is behaving the same as `last_level_temperture` and it will be removed in
the next release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10471
Test Plan: CI
Reviewed By: siying
Differential Revision: D38450621
Pulled By: jay-zhuang
fbshipit-source-id: cc1cdf8bad409376fec0152abc0a64fb72a91527
Summary:
Many workloads have temporal locality, where recently written items are read back in a short period of time. When using remote file systems, this is inefficient since it involves network traffic and higher latencies. Because of this, we would like to support prepopulating the blob cache during flush.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10298
Reviewed By: ltamasi
Differential Revision: D37908743
Pulled By: gangliao
fbshipit-source-id: 9feaed234bc719d38f0c02975c1ad19fa4bb37d1
Summary:
Which will be used for tiered storage to preclude hot data from
compacting to the cold tier (the last level).
Internally, adding seqno to time mapping. A periodic_task is scheduled
to record the current_seqno -> current_time in certain cadence. When
memtable flush, the mapping informaiton is stored in sstable property.
During compaction, the mapping information are merged and get the
approximate time of sequence number, which is used to determine if a key
is recently inserted or not and preclude it from the last level if it's
recently inserted (within the `preclude_last_level_data_seconds`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10338
Test Plan: CI
Reviewed By: siying
Differential Revision: D37810187
Pulled By: jay-zhuang
fbshipit-source-id: 6953be7a18a99de8b1cb3b162d712f79c2b4899f
Summary:
**Summary**
Make the mempurge option flag a Mutable Column Family option flag. Therefore, the mempurge feature can be dynamically toggled.
**Motivation**
RocksDB users prefer having the ability to switch features on and off without having to close and reopen the DB. This is particularly important if the feature causes issues and needs to be turned off. Dynamically changing a DB option flag does not seem currently possible.
Moreover, with this new change, the MemPurge feature can be toggled on or off independently between column families, which we see as a major improvement.
**Content of this PR**
This PR includes removal of the `experimental_mempurge_threshold` flag as a DB option flag, and its re-introduction as a `MutableCFOption` flag. I updated the code to handle dynamic changes of the flag (in particular inside the `FlushJob` file). Additionally, this PR includes a new test to demonstrate the capacity of the code to toggle the MemPurge feature on and off, as well as the addition in the `db_stress` module of 2 different mempurge threshold values (0.0 and 1.0) that can be randomly changed with the `set_option_one_in` flag. This is useful to stress test the dynamic changes.
**Benchmarking**
I will add numbers to prove that there is no performance impact within the next 12 hours.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10011
Reviewed By: pdillinger
Differential Revision: D36462357
Pulled By: bjlemaire
fbshipit-source-id: 5e3d63bdadf085c0572ecc2349e7dd9729ce1802
Summary:
There is currently no caching mechanism for blobs, which is not ideal especially when the database resides on remote storage (where we cannot rely on the OS page cache). As part of this task, we would like to make it possible for the application to configure a blob cache.
This PR is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10155
Reviewed By: ltamasi
Differential Revision: D37150819
Pulled By: gangliao
fbshipit-source-id: b807c7916ea5d411588128f8e22a49f171388fe2
Summary:
Currently, if blob files are enabled (i.e. `enable_blob_files` is true), large values are extracted both during flush/recovery (when SST files are written into level 0 of the LSM tree) and during compaction into any LSM tree level. For certain use cases that have a mix of short-lived and long-lived values, it might make sense to support extracting large values only during compactions whose output level is greater than or equal to a specified LSM tree level (e.g. compactions into L1/L2/... or above). This could reduce the space amplification caused by large values that are turned into garbage shortly after being written at the price of some write amplification incurred by long-lived values whose extraction to blob files is delayed.
In order to achieve this, we would like to do the following:
- Add a new configuration option `blob_file_starting_level` (default: 0) to `AdvancedColumnFamilyOptions` (and `MutableCFOptions` and extend the related logic)
- Instantiate `BlobFileBuilder` in `BuildTable` (used during flush and recovery, where the LSM tree level is L0) and `CompactionJob` iff `enable_blob_files` is set and the LSM tree level is `>= blob_file_starting_level`
- Add unit tests for the new functionality, and add the new option to our stress tests (`db_stress` and `db_crashtest.py` )
- Add the new option to our benchmarking tool `db_bench` and the BlobDB benchmark script `run_blob_bench.sh`
- Add the new option to the `ldb` tool (see https://github.com/facebook/rocksdb/wiki/Administration-and-Data-Access-Tool)
- Ideally extend the C and Java bindings with the new option
- Update the BlobDB wiki to document the new option.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10077
Reviewed By: ltamasi
Differential Revision: D36884156
Pulled By: gangliao
fbshipit-source-id: 942bab025f04633edca8564ed64791cb5e31627d
Summary:
These methods allow for more thorough testing of the ObjectRegistry and Customizable infrastructure in a simpler manner. With this change, the Customizable tests can now check what factories are registered and attempt to create each of them in a systematic fashion.
With this change, I think all of the factories registered with the ObjectRegistry/CreateFromString are now tested via the customizable_test classes.
Note that there were a few other minor changes. There was a "posix://*" register with the ObjectRegistry which was missed during the PatternEntry conversion -- these changes found that. The nickname and default names for the FileSystem classes was also inverted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9358
Reviewed By: pdillinger
Differential Revision: D33433542
Pulled By: mrambacher
fbshipit-source-id: 9a32da74e6620745b4eeffb2712be70eeeadfa7e
Summary:
Add methods to set the various functions (Parse, Serialize, Equals) to the OptionTypeInfo. These methods simplify the number of constructors required for OptionTypeInfo and make the code a little clearer.
Add functions to the OptionTypeInfo for Prepare and Validate. These methods allow types other than Configurable and Customizable to have Prepare and Validate logic. These methods could be used by an option to guarantee that its settings were in a range or that a value was initialized.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9411
Reviewed By: pdillinger
Differential Revision: D36174849
Pulled By: mrambacher
fbshipit-source-id: 72517d8c6bab4723788a4c1a9e16590bff870125
Summary:
Right now we still don't fully use std::numeric_limits but use a macro, mainly for supporting VS 2013. Right now we only support VS 2017 and up so it is not a problem. The code comment claims that MinGW still needs it. We don't have a CI running MinGW so it's hard to validate. since we now require C++17, it's hard to imagine MinGW would still build RocksDB but doesn't support std::numeric_limits<>.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9954
Test Plan: See CI Runs.
Reviewed By: riversand963
Differential Revision: D36173954
fbshipit-source-id: a35a73af17cdcae20e258cdef57fcf29a50b49e0
Summary:
- Make `compression_per_level` dynamical changeable with `SetOptions`;
- Fix a bug that `compression_per_level` is not used for flush;
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9658
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D34700749
Pulled By: jay-zhuang
fbshipit-source-id: a23b9dfa7ad03d393c1d71781d19e91de796f49c
Summary:
After https://github.com/facebook/rocksdb/issues/9515 added a unique_ptr to Status, we see some
warnings-as-error in some internal builds like this:
```
stderr: rocksdb/src/db/compaction/compaction_job.cc:2839:7: error:
offset of on non-standard-layout type 'struct CompactionServiceResult'
[-Werror,-Winvalid-offsetof]
{offsetof(struct CompactionServiceResult, status),
^ ~~~~~~
```
I see three potential solutions to resolving this:
* Expand our use of an idiom that works around the warning (see offset_of
functions removed in this change, inspired by
https://gist.github.com/graphitemaster/494f21190bb2c63c5516) However,
this construction is invoking undefined behavior that assumes consistent
layout with no compiler-introduced indirection. A compiler incompatible
with our assumptions will likely compile the code and exhibit undefined
behavior.
* Migrate to something in place of offset, like a function mapping
CompactionServiceResult* to Status* (for the `status` field). This might
be required in the long term.
* **Selected:** Use our new C++17 dependency to use offsetof in a well-defined way
when the compiler allows it. From a comment on
https://gist.github.com/graphitemaster/494f21190bb2c63c5516:
> A final note: in C++17, offsetof is conditionally supported, which
> means that you can use it on any type (not just standard layout
> types) and the compiler will error if it can't compile it correctly.
> That appears to be the best option if you can live with C++17 and
> don't need constexpr support.
The C++17 semantics are confirmed on
https://en.cppreference.com/w/cpp/types/offsetof, so we can suppress the
warning as long as we accept that we might run into a compiler that
rejects the code, and at that point we will find a solution, such as
the more intrusive "migrate" solution above.
Although this is currently only showing in our buck build, it will
surely show up also with make and cmake, so I have updated those
configurations as well.
Also in the buck build, -Wno-expansion-to-defined does not appear to be
needed anymore (both current compiler configurations) so I
removed it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9563
Test Plan: Tried out buck builds with both current compiler configurations
Reviewed By: riversand963
Differential Revision: D34220931
Pulled By: pdillinger
fbshipit-source-id: d39436008259bd1eaaa87c77be69fb2a5b559e1f
Summary:
In RocksDB, this option was already marked as "NOT SUPPORTED" for a long time, and setting this option does not have any effect on the behavior of RocksDB library. Therefore, we are removing it in the preparations of the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9446
Reviewed By: ajkr
Differential Revision: D33793048
Pulled By: bjlemaire
fbshipit-source-id: 73316efdb194e90225005246673dae99e65577ae
Summary:
If ignore_unsupported_options=true, then it is possible for MemTableRepFactory::CreateFromString to succeed without setting a result (result=nullptr). This would cause the original value to be overwritten with null and an error would be raised later when PrepareOptions is invoked.
Added unit test for this condition. Will add (in another PR unless required by reviewers) comparable tests for all of the other Customizable classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9273
Reviewed By: ltamasi
Differential Revision: D32990365
Pulled By: mrambacher
fbshipit-source-id: b150724c3f5ae7346357b3866244fd93466875c7
Summary:
The patch adds a new BlobDB configuration option `blob_compaction_readahead_size`
that can be used to enable prefetching data from blob files during compaction.
This is important when using storage with higher latencies like HDDs or remote filesystems.
If enabled, prefetching is used for all cases when blobs are read during compaction,
namely garbage collection, compaction filters (when the existing value has to be read from
a blob file), and `Merge` (when the value of the base `Put` is stored in a blob file).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9187
Test Plan: Ran `make check` and the stress/crash test.
Reviewed By: riversand963
Differential Revision: D32565512
Pulled By: ltamasi
fbshipit-source-id: 87be9cebc3aa01cc227bec6b5f64d827b8164f5d
Summary:
This commit introduces incremental compaction in univeral style for space amplification. This follows the first improvement mentioned in https://rocksdb.org/blog/2021/04/12/universal-improvements.html . The implemention simply picks up files about size of max_compaction_bytes to compact and execute if the penalty is not too big. More optimizations can be done in the future, e.g. prioritizing between this compaction and other types. But for now, the feature is supposed to be functional and can often reduce frequency of full compactions, although it can introduce penalty.
In order to add cut files more efficiently so that more files from upper levels can be included, SST file cutting threshold (for current file + overlapping parent level files) is set to 1.5X of target file size. A 2MB target file size will generate files like this: https://gist.github.com/siying/29d2676fba417404f3c95e6c013c7de8 Number of files indeed increases but it is not out of control.
Two set of write benchmarks are run:
1. For ingestion rate limited scenario, we can see full compaction is mostly eliminated: https://gist.github.com/siying/959bc1186066906831cf4c808d6e0a19 . The write amp increased from 7.7 to 9.4, as expected. After applying file cutting, the number is improved to 8.9. In another benchmark, the write amp is even better with the incremental approach: https://gist.github.com/siying/d1c16c286d7c59c4d7bba718ca198163
2. For ingestion rate unlimited scenario, incremental compaction turns out to be too expensive most of the time and is not executed, as expected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8655
Test Plan: Add unit tests to the functionality.
Reviewed By: ajkr
Differential Revision: D31787034
fbshipit-source-id: ce813e63b15a61d5a56e97bf8902a1b28e011beb
Summary:
The current BlobDB garbage collection logic works by relocating the valid
blobs from the oldest blob files as they are encountered during compaction,
and cleaning up blob files once they contain nothing but garbage. However,
with sufficiently skewed workloads, it is theoretically possible to end up in a
situation when few or no compactions get scheduled for the SST files that contain
references to the oldest blob files, which can lead to increased space amp due
to the lack of GC.
In order to efficiently handle such workloads, the patch adds a new BlobDB
configuration option called `blob_garbage_collection_force_threshold`,
which signals to BlobDB to schedule targeted compactions for the SST files
that keep alive the oldest batch of blob files if the overall ratio of garbage in
the given blob files meets the threshold *and* all the given blob files are
eligible for GC based on `blob_garbage_collection_age_cutoff`. (For example,
if the new option is set to 0.9, targeted compactions will get scheduled if the
sum of garbage bytes meets or exceeds 90% of the sum of total bytes in the
oldest blob files, assuming all affected blob files are below the age-based cutoff.)
The net result of these targeted compactions is that the valid blobs in the oldest
blob files are relocated and the oldest blob files themselves cleaned up (since
*all* SST files that rely on them get compacted away).
These targeted compactions are similar to periodic compactions in the sense
that they force certain SST files that otherwise would not get picked up to undergo
compaction and also in the sense that instead of merging files from multiple levels,
they target a single file. (Note: such compactions might still include neighboring files
from the same level due to the need of having a "clean cut" boundary but they never
include any files from any other level.)
This functionality is currently only supported with the leveled compaction style
and is inactive by default (since the default value is set to 1.0, i.e. 100%).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8994
Test Plan: Ran `make check` and tested using `db_bench` and the stress/crash tests.
Reviewed By: riversand963
Differential Revision: D31489850
Pulled By: ltamasi
fbshipit-source-id: 44057d511726a0e2a03c5d9313d7511b3f0c4eab
Summary:
This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead.
Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing.
Hopefully, this sort of code hygiene cleanup will speed up the builds...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930
Reviewed By: pdillinger
Differential Revision: D31142788
Pulled By: mrambacher
fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d
Summary:
Made SliceTransform into a Customizable class.
Would be nice to write a test that stored and used a custom transform in an SST table.
There are a set of tests (DBBlockFliterTest.PrefixExtractor*, SamePrefixTest.InDomainTest, PrefixTest.PrefixAndWholeKeyTest that run the same with or without a SliceTransform/PrefixFilter. Is this expected?
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8641
Reviewed By: zhichao-cao
Differential Revision: D31142793
Pulled By: mrambacher
fbshipit-source-id: bb08672fccbfdc263dcae21f25a62307e1facda1
Summary:
This PR does the following:
-> Makes the MemTableRepFactory into a Customizable class and creatable/configurable via CreateFromString
-> Makes the existing implementations compatible with configurations
-> Moves the "SpecialRepFactory" test class into testutil, accessible via the ObjectRegistry or a NewSpecial API
New tests were added to validate the functionality and all existing tests pass. db_bench and memtablerep_bench were hand-tested to verify the functionality in those tools.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8419
Reviewed By: zhichao-cao
Differential Revision: D29558961
Pulled By: mrambacher
fbshipit-source-id: 81b7229636e4e649a0c914e73ac7b0f8454c931c
Summary:
Old typedef syntax is confusing
Most but not all changes with
perl -pi -e 's/typedef (.*) ([a-zA-Z0-9_]+);/using $2 = $1;/g' list_of_files
make format
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8751
Test Plan: existing
Reviewed By: zhichao-cao
Differential Revision: D30745277
Pulled By: pdillinger
fbshipit-source-id: 6f65f0631c3563382d43347896020413cc2366d9
Summary:
Some FIFO users want to keep the data for longer, but the old data is rarely accessed. This feature allows users to configure FIFO compaction so that data older than a threshold is moved to a warm storage tier.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8310
Test Plan: Add several unit tests.
Reviewed By: ajkr
Differential Revision: D28493792
fbshipit-source-id: c14824ea634814dee5278b449ab5c98b6e0b5501
Summary:
- Changed MergeOperator, CompactionFilter, and CompactionFilterFactory into Customizable classes.
- Added Options/Configurable/Object Registration for TTL and Cassandra variants
- Changed the StringAppend MergeOperators to accept a string delimiter rather than a simple char. Made the delimiter into a configurable option
- Added tests for new functionality
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8481
Reviewed By: zhichao-cao
Differential Revision: D30136050
Pulled By: mrambacher
fbshipit-source-id: 271d1772835935b6773abaf018ee71e42f9491af
Summary:
If a Customizable option was not mutable, it would still appear in the list of mutable options when serialized. This meant that when the immutable options were used to configure another immutable object, an "option not changeable" status would be returned.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8457
Reviewed By: zhichao-cao
Differential Revision: D29428298
Pulled By: mrambacher
fbshipit-source-id: 3945b0b822f8e5955a7c5590fe64dfd5bc1fe6a0
Summary:
Makes the Comparator class into a Customizable object. Added/Updated the CreateFromString method to create Comparators. Added test for using the ObjectRegistry to create one.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8336
Reviewed By: jay-zhuang
Differential Revision: D28999612
Pulled By: mrambacher
fbshipit-source-id: bff2cb2814eeb9fef6a00fddc61d6e34b6fbcf2e
Summary:
Added ParseType, SerializeType, and TypesAreEqual methods to OptionTypeInfo. These methods can be used for serialization and deserialization of basic types.
Change the MutableCF/DB Options to use this format.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8249
Reviewed By: jay-zhuang
Differential Revision: D28351190
Pulled By: mrambacher
fbshipit-source-id: 72a78643b804f2f0bf59c32ffefa63346672ad16
Summary:
This change enables a couple of things:
- Different ConfigOptions can have different registry/factory associated with it, thereby allowing things like a "Test" ConfigOptions versus a "Production"
- The ObjectRegistry is created fewer times and can be re-used
The ConfigOptions can also be initialized/constructed from a DBOptions, in which case it will grab some of its settings (Env, Logger) from the DBOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8166
Reviewed By: zhichao-cao
Differential Revision: D27657952
Pulled By: mrambacher
fbshipit-source-id: ae1d6200bb7ab127405cdeefaba43c7fe694dfdd
Summary:
The ImmutableCFOptions contained a bunch of fields that belonged to the ImmutableDBOptions. This change cleans that up by introducing an ImmutableOptions struct. Following the pattern of Options struct, this class inherits from the DB and CFOption structs (of the Immutable form).
Only one structural change (the ImmutableCFOptions::fs was changed to a shared_ptr from a raw one) is in this PR. All of the other changes involve moving the member variables from the ImmutableCFOptions into the ImmutableOptions and changing member variables or function parameters as required for compilation purposes.
Follow-on PRs may do a further clean-up of the code, such as renaming variables (such as "ImmutableOptions cf_options") and potentially eliminating un-needed function parameters (there is no longer a need to pass both an ImmutableDBOptions and an ImmutableOptions to a function).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8262
Reviewed By: pdillinger
Differential Revision: D28226540
Pulled By: mrambacher
fbshipit-source-id: 18ae71eadc879dedbe38b1eb8e6f9ff5c7147dbf
Summary:
Renaming ImmutableCFOptions::info_log and statistics to logger and stats. This is stage 2 in creating an ImmutableOptions class. It is necessary because the names match those in ImmutableOptions and have different types.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8227
Reviewed By: jay-zhuang
Differential Revision: D28000967
Pulled By: mrambacher
fbshipit-source-id: 3bf2aa04e8f1e8724d825b7deacf41080c14420b
Summary:
As previously coded, a Configurable extension would need access to code not in the public API. This change moves RegisterOptions into the Configurable class and therefore available to public extensions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8223
Reviewed By: anand1976
Differential Revision: D27960188
Pulled By: mrambacher
fbshipit-source-id: ac88b19397183df633902def5b5701b9b65fbf40
Summary:
This PR is a first step at attempting to clean up some of the Mutable/Immutable Options code. With this change, a DBOption and a ColumnFamilyOption can be reconstructed from their Mutable and Immutable equivalents, respectively.
readrandom tests do not show any performance degradation versus master (though both are slightly slower than the current 6.19 release).
There are still fields in the ImmutableCFOptions that are not CF options but DB options. Eventually, I would like to move those into an ImmutableOptions (= ImmutableDBOptions+ImmutableCFOptions). But that will be part of a future PR to minimize changes and disruptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8176
Reviewed By: pdillinger
Differential Revision: D27954339
Pulled By: mrambacher
fbshipit-source-id: ec6b805ba9afe6e094bffdbd76246c2d99aa9fad
Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes.
For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.
There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved.
Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:
6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found)
6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found)
PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found)
(Note that the times for 6.18 are prior to revert of the SystemClock).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033
Reviewed By: pdillinger
Differential Revision: D27014563
Pulled By: mrambacher
fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
Summary:
For dictionary compression, we need to collect some representative samples of the data to be compressed, which we use to either generate or train (when `CompressionOptions::zstd_max_train_bytes > 0`) a dictionary. Previously, the strategy was to buffer all the data blocks during flush, and up to the target file size during compaction. That strategy allowed us to randomly pick samples from as wide a range as possible that'd be guaranteed to land in a single output file.
However, some users try to make huge files in memory-constrained environments, where this strategy can cause OOM. This PR introduces an option, `CompressionOptions::max_dict_buffer_bytes`, that limits how much data blocks are buffered before we switch to unbuffered mode (which means creating the per-SST dictionary, writing out the buffered data, and compressing/writing new blocks as soon as they are built). It is not strict as we currently buffer more than just data blocks -- also keys are buffered. But it does make a step towards giving users predictable memory usage.
Related changes include:
- Changed sampling for dictionary compression to select unique data blocks when there is limited availability of data blocks
- Made use of `BlockBuilder::SwapAndReset()` to save an allocation+memcpy when buffering data blocks for building a dictionary
- Changed `ParseBoolean()` to accept an input containing characters after the boolean. This is necessary since, with this PR, a value for `CompressionOptions::enabled` is no longer necessarily the final component in the `CompressionOptions` string.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7970
Test Plan:
- updated `CompressionOptions` unit tests to verify limit is respected (to the extent expected in the current implementation) in various scenarios of flush/compaction to bottommost/non-bottommost level
- looked at jemalloc heap profiles right before and after switching to unbuffered mode during flush/compaction. Verified memory usage in buffering is proportional to the limit set.
Reviewed By: pdillinger
Differential Revision: D26467994
Pulled By: ajkr
fbshipit-source-id: 3da4ef9fba59974e4ef40e40c01611002c861465
Summary:
Added a "only_mutable_options" flag to the ConfigOptions. When set, the Configurable methods will only look at/update options that are marked as kMutable.
Fixed DB::SetOptions to allow for the update of any mutable TableFactory options. Fixes https://github.com/facebook/rocksdb/issues/7385.
Added tests for the new flag. Updated HISTORY.md
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7936
Reviewed By: akankshamahajan15
Differential Revision: D26389646
Pulled By: mrambacher
fbshipit-source-id: 6dc247f6e999fa2814059ebbd0af8face109fea0
Summary:
in PR https://github.com/facebook/rocksdb/issues/7419 , we introduce the new Append and PositionedAppend APIs to WritableFile at File System, which enable RocksDB to pass the data verification information (e.g., checksum of the data) to the lower layer. In this PR, we use the new API in WritableFileWriter, such that the file created via WritableFileWrite can pass the checksum to the storage layer. To control which types file should apply the checksum handoff, we add checksum_handoff_file_types to DBOptions. User can use this option to control which file types (Currently supported file tyes: kLogFile, kTableFile, kDescriptorFile.) should use the new Append and PositionedAppend APIs to handoff the verification information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7523
Test Plan: add new unit test, pass make check/ make asan_check
Reviewed By: pdillinger
Differential Revision: D24313271
Pulled By: zhichao-cao
fbshipit-source-id: aafd69091ae85c3318e3e17cbb96fe7338da11d0
Summary:
This patch simply adds a couple of options that will enable users to
configure garbage collection when using the integrated BlobDB
implementation. The actual GC logic will be added in a separate step.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7661
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D24906544
Pulled By: ltamasi
fbshipit-source-id: ee0e056a712a4b4475cd90de8b27d969bd61b7e1
Summary:
The Customizable class is an extension of the Configurable class and allows instances to be created by a name/ID. Classes that extend customizable can define their Type (e.g. "TableFactory", "Cache") and a method to instantiate them (TableFactory::CreateFromString). Customizable objects can be registered with the ObjectRegistry and created dynamically.
Future PRs will make more types of objects extend Customizable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6590
Reviewed By: cheng-chang
Differential Revision: D24841553
Pulled By: zhichao-cao
fbshipit-source-id: d0c2132bd932e971cbfe2c908ca2e5db30c5e155
Summary:
This PR adds support for writing a location identifier of the DB host to SST files as a table property. By default, the hostname is used, but can be overridden by the user. There have been some recent corruptions in files written by ```SstFileWriter``` before checksumming, so this property can be used to trace it back to the writing host and checking the host for hardware isues.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7479
Test Plan: Add new unit tests
Reviewed By: pdillinger
Differential Revision: D24340671
Pulled By: anand1976
fbshipit-source-id: 2038949fd8d160c0633ccb4f9da77740f19fa2a2
Summary:
Introduce an new option options.check_flush_compaction_key_order, by default set to true, which checks key order of flush and compaction, and fail the operation if the order is violated.
Also did minor refactor hash checking code, which consolidates the hashing logic to a vlidation class, where the key ordering logic is added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7467
Test Plan: Add unit tests to validate the check can catch reordering in flush and compaction, and can be properly disabled.
Reviewed By: riversand963
Differential Revision: D24010683
fbshipit-source-id: 8dd6292d2cda8006054e9ded7cfa4bf405f0527c
Summary:
Add a new Option "allow_data_in_errors". When it's set by users, it allows them to opt-in to get error messages containing corrupted keys/values. Corrupt keys, values will be logged in the messages, logs, status etc. that will help users with the useful information regarding affected data.
By default value is set false to prevent users data to be exposed in the messages.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7420
Test Plan:
1. make check -j64
2. Add a new test case
Reviewed By: ajkr
Differential Revision: D23835028
Pulled By: akankshamahajan15
fbshipit-source-id: 8d2eba8fb898e79fcf1fccc07295065a75eb59b1
sdong