Summary:
There was a race condition in the test where the rolling thread
acquired the mutex before the flush thread pinned the logger. Rather than add
more complicated synchronization to fix it, I followed Siying's suggestion to
use SyncPoint in the test code.
Comments in the LoadDependency() invocation explain the reason for each of the
sync points.
Test Plan:
Ran test 1000 times for tsan/asan. Will wait for all sandcastle tests
to finish before committing since this is a tricky test.
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54615
Summary:
Previously I just slept until the flush_thread was "probably" ready
since proper synchronization in test cases seemed like overkill. But then tsan
complained about it, so I did the synchronization (mostly) properly now.
Test Plan:
$ COMPILE_WITH_TSAN=1 make -j32 auto_roll_logger_test
$ ./auto_roll_logger_test
Reviewers: anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54399
Summary:
For GetLogFileSize() and Flush(), they previously did not follow the
synchronization pattern for accessing logger_. This meant ResetLogger() could
cause logger_ destruction while the unsynchronized functions were accessing it,
causing a segfault.
Also made the mutex instance variable mutable so we can preserve
GetLogFileSize()'s const-ness.
Test Plan:
new test case, it's quite ugly because both threads need to access
one of the functions with SyncPoints (PosixLogger::Flush()), and also special
handling is needed to prevent the mutex and sync points from conflicting.
Reviewers: kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54237
Summary:
CreateLoggerFromOptions have some parameters like db_log_dir and env, these parameters are redundant since they already exist in DBOptions
this patch remove the redundant parameters and expose CreateLoggerFromOptions to users
Test Plan: make check
Reviewers: igor, anthony, yhchiang, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D49713
Summary: Fix for universal compaction with trivial move, when the ouput level is 0. The tests where failing. Fixed by allowing normal compaction when output level is 0.
Test Plan: modified test cases run successfully.
Reviewers: sdong, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: anthony, kradhakrishnan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42933
* std::chrono does not provide enough granularity for microsecs and periodically emits
duplicates
* the bug is manifested in log rotation logic where we get duplicate
log file names and loose previous log content
* msvc does not imlement COW on std::strings adjusted the test to use
refs in the loops as auto does not retain ref info
* adjust auto_log rotation test with Windows specific command to remove
a folder. The test previously worked because we have unix utils installed
in house but this may not be the case for everyone.
Summary: Add new CheckFileExists method. Considered changing the FileExists api but didn't want to break anyone's builds.
Test Plan: unit tests
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42003
Summary: This helps Windows port to format their changes, as discussed. Might have formatted some other codes too becasue last 10 commits include more.
Test Plan: Build it.
Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D41961
Summary:
Introduced a new category in the enum InfoLogLevel in env.h.
Modifed Log() in env.cc to use the Header()
when the InfoLogLevel == HEADER_LEVEL.
Updated tests in auto_roll_logger_test to ensure
the header is handled properly in these cases.
Test Plan: Augment existing tests in auto_roll_logger_test
Reviewers: igor, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41067
Summary: Make RocksDb build and run on Windows to be functionally
complete and performant. All existing test cases run with no
regressions. Performance numbers are in the pull-request.
Test plan: make all of the existing unit tests pass, obtain perf numbers.
Co-authored-by: Praveen Rao praveensinghrao@outlook.com
Co-authored-by: Sherlock Huang baihan.huang@gmail.com
Co-authored-by: Alex Zinoviev alexander.zinoviev@me.com
Co-authored-by: Dmitri Smirnov dmitrism@microsoft.com
Summary:
Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different.
In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest.
There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides.
```lang=bash
% cat ~/transform
#!/bin/sh
files=$(git ls-files '*test\.cc')
for file in $files
do
if grep -q "rocksdb::test::RunAllTests()" $file
then
if grep -Eq '^class \w+Test {' $file
then
perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file
perl -pi -e 's/^(TEST)/${1}_F/g' $file
fi
perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file
perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file
fi
done
% sh ~/transform
% make format
```
Second iteration of this diff contains only scripted changes.
Third iteration contains manual changes to fix last errors and make it compilable.
Test Plan:
Build and notice no errors.
```lang=bash
% USE_CLANG=1 make check -j55
```
Tests are still testing.
Reviewers: meyering, sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35157
Summary:
gtest does not use exceptions to fail a unit test by design, and `ASSERT*`s are implemented using `return`. As a consequence we cannot use `ASSERT*` in a function that does not return `void` value ([[ https://code.google.com/p/googletest/wiki/AdvancedGuide#Assertion_Placement | 1]]), and have to fix our existing code. This diff does this in a generic way, with no manual changes.
In order to detect all existing `ASSERT*` that are used in functions that doesn't return void value, I change the code to generate compile errors for such cases.
In `util/testharness.h` I defined `EXPECT*` assertions, the same way as `ASSERT*`, and redefined `ASSERT*` to return `void`. Then executed:
```lang=bash
% USE_CLANG=1 make all -j55 -k 2> build.log
% perl -naF: -e 'print "-- -number=".$F[1]." ".$F[0]."\n" if /: error:/' \
build.log | xargs -L 1 perl -spi -e 's/ASSERT/EXPECT/g if $. == $number'
% make format
```
After that I reverted back change to `ASSERT*` in `util/testharness.h`. But preserved introduced `EXPECT*`, which is the same as `ASSERT*`. This will be deleted once switched to gtest.
This diff is independent and contains manual changes only in `util/testharness.h`.
Test Plan:
Make sure all tests are passing.
```lang=bash
% USE_CLANG=1 make check
```
Reviewers: igor, lgalanis, sdong, yufei.zhu, rven, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33333
Summary:
The unit test was supposed to check that the old file and the new file contains
the header message.
Test Plan: Run the unit test.
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33705
Summary:
During running AutoRollLoggerTest on FreeBSD we have found out that AutoRollLogger is not flushing correctly (test fails on FreeBSD)
This diff add Flush to AutoRollLogger to fix this problem
Test Plan:
[My machine] make all check ( all tests pass)
[FreeBSD VM] running AutoRollLoggerTest ( all tests pass )
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33633
Summary:
This change adds LogHeader provision to the logger. For the rolling logger
implementation, the headers are copied over to the new log file every time
there is a log roll over.
Test Plan: Added a unit test to test the rolling log case.
Reviewers: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D32817
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
Summary:
auto_roll_logger_test fails from time to time. I wasn't able to repro
the issue but by looking at the code, it seems like the initial ctime_
value can be set to the boundary of the second so it may still have a
chance to get rolled when interval is set to 1 second.
```
util/auto_roll_logger_test.cc:120: failed: 118 > 708
==19470== Syscall param msync(start) points to unaddressable byte(s)
==19470== at 0x4E46CE0: __msync_nocancel (in
/usr/local/fbcode/gcc-4.8.1-glibc-2.17/lib/libpthread-2.17.so)
==19470== by 0x584EFB: access_mem (Ginit.c:137)
==19470== by 0x5834E3: _ULx86_64_access_reg (libunwind_i.h:162)
==19470== by 0x585601: apply_reg_state (Gparser.c:742)
==19470== by 0x5866BE: _ULx86_64_dwarf_find_save_locs (Gparser.c:883)
==19470== by 0x584550: _ULx86_64_dwarf_step (Gstep.c:34)
==19470== by 0x583653: _ULx86_64_step (Gstep.c:71)
==19470== by 0x583FD2: _ULx86_64_tdep_trace (Gtrace.c:217)
==19470== by 0x5831C3: backtrace (backtrace.c:69)
Test Plan: ./auto_roll_logger_test
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21951
Summary:
Fix a bug causing LOG is not created when max_log_file_size is set.
This bug is reported in issue #174.
Test Plan:
Add TEST(AutoRollLoggerTest, LogFileExistence).
make auto_roll_logger_test
./auto_roll_logger_test
Reviewers: haobo, sdong, ljin, igor, igor2
Reviewed By: igor2
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D19053
Summary: XCode for some reason injects `#define DEBUG 1` into our code, which makes compile fail because we use `DEBUG` keyword for other stuff. This diff fixes the issue by renaming `DEBUG` to `DEBUG_LEVEL`.
Test Plan: compiles
Reviewers: dhruba, haobo, sdong, yhchiang, ljin
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17709
Summary: Compiling for iOS has by default turned on -Wmissing-prototypes, which causes rocksdb to fail compiling. This diff turns on -Wmissing-prototypes in our compile options and cleans up all functions with missing prototypes.
Test Plan: compiles
Reviewers: dhruba, haobo, ljin, sdong
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17649
Summary:
InfoLogLevel test now checks the number of lines of the output log file
instead of the number of bytes in the log file.
This diff fixes the issue that the previous InfoLogLevel test in
auto_roll_logger_test passed in make check but fails when valgrind
is used.
Test Plan: run with make check and valgrind.
Reviewers: kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16407
Summary: fix the memory leak that was captured by jenkin build.
Test Plan: ran the valgrind test locally
Reviewers: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16389
Summary:
* Now each Log related function has a variant that takes an additional
argument indicating its log level, which is one of the following:
- DEBUG, INFO, WARN, ERROR, FATAL.
* To ensure backward-compatibility, old version Log functions are kept
unchanged.
* Logger now has a member variable indicating its log level. Any incoming
Log request which log level is lower than Logger's log level will not
be output.
* The output of the newer version Log will be prefixed by its log level.
Test Plan:
Add a LogType test in auto_roll_logger_test.cc
= Sample log output =
2014/02/11-00:03:07.683895 7feded179840 [DEBUG] this is the message to be written to the log file!!
2014/02/11-00:03:07.683898 7feded179840 [INFO] this is the message to be written to the log file!!
2014/02/11-00:03:07.683900 7feded179840 [WARN] this is the message to be written to the log file!!
2014/02/11-00:03:07.683903 7feded179840 [ERROR] this is the message to be written to the log file!!
2014/02/11-00:03:07.683906 7feded179840 [FATAL] this is the message to be written to the log file!!
Reviewers: dhruba, xjin, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16071
Summary:
There are three SanitizeOption-s now : one for DBOptions, one for ColumnFamilyOptions and one for Options (which just calls the other two)
I have also reshuffled some options -- table_cache options and info_log should live in DBOptions, for example.
Test Plan: make check doesn't complain
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15873
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.
Test Plan: compile rocksdb
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13287
Summary: Replace include/leveldb with include/rocksdb.
Test Plan:
make clean; make check
make clean; make release
Differential Revision: https://reviews.facebook.net/D12489
Summary:
PosixLogger and AutoRollLogger do not seem to be thread safe.
For PosixLogger, log_size_ is not atomically updated.
For AutoRollLogger, the underlying logger_ might be deleted by
one thread while still being accessed by another.
Test Plan: make check
Reviewers: kailiu, dhruba, heyongqiang
Reviewed By: kailiu
CC: leveldb, zshao, sheki
Differential Revision: https://reviews.facebook.net/D9699
Summary: Fix for memory leaks in rocksdb tests. Also modified the variable NUM_FAILED_TESTS to print the actual number of failed tests.
Test Plan: make <test>; valgrind --leak-check=full ./<test>
Reviewers: sheki, dhruba
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9333
Summary:
I missed InitTestDb() in one of my tess. InitTestDb() initializes the test directory, without which the test will throw IO error.
This problem didn't occur before because I've already run the tests before so the test directory is already there.
Test Plan:
Reviewers: dhruba
CC:
Task ID: #
Blame Rev:
Summary: Fix the warning [-Werror=format-security] and [-Werror=unused-result].
Test Plan:
enforced the Werror and run make
Task ID: 2101673
Blame Rev:
Reviewers: heyongqiang
Differential Revision: https://reviews.facebook.net/D8553
Summary:
* Add a SplitByTTLLogger to enable this feature. In this diff I implemented generalized AutoSplitLoggerBase class to simplify the
development of such classes.
* Refactor the existing AutoSplitLogger and fix several bugs.
Test Plan:
* Added a unit tests for different types of "auto splitable" loggers individually.
* Tested the composited logger which allows the log files to be splitted by both TTL and log size.
Reviewers: heyongqiang, dhruba
Reviewed By: heyongqiang
CC: zshao, leveldb
Differential Revision: https://reviews.facebook.net/D8037
Dmitri Smirnov