Summary:
This fixes the following scenario we've hit:
- we reached max_total_wal_size, created a new wal and scheduled flushing all memtables corresponding to the old one,
- before the last of these flushes started its column family was dropped; the last background flush call was a no-op; no one removed the old wal from alive_logs_,
- hours have passed and no flushes happened even though lots of data was written; data is written to different column families, compactions are disabled; old column families are dropped before memtable grows big enough to trigger a flush; the old wal still sits in alive_logs_ preventing max_total_wal_size limit from kicking in,
- a few more hours pass and we run out disk space because of one huge .log file.
Test Plan: `make check`; backported the new test, checked that it fails without this diff
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40893
Summary: Make RocksDb build and run on Windows to be functionally
complete and performant. All existing test cases run with no
regressions. Performance numbers are in the pull-request.
Test plan: make all of the existing unit tests pass, obtain perf numbers.
Co-authored-by: Praveen Rao praveensinghrao@outlook.com
Co-authored-by: Sherlock Huang baihan.huang@gmail.com
Co-authored-by: Alex Zinoviev alexander.zinoviev@me.com
Co-authored-by: Dmitri Smirnov dmitrism@microsoft.com
Summary: Try to allocate LevelFileIteratorState and LevelFileNumIterator from DB iterator's arena, instead of calling malloc and free.
Test Plan: valgrind check
Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40929
Summary: We have a race in the way test works. We avoided the race by adding the
wait to the counter. I thought 1s was eternity, but that is not true in some
scenarios. Increasing the timeout to 10s and adding warnings.
Also, adding nosleep to avoid the case where the wakeup thread is waiting behind
the sleeping thread for scheduling.
Test Plan: Run make check
Reviewers: siying igorcanadi
CC: leveldb@
Task ID: #7312624
Blame Rev:
Summary:
When seek target is a merge key (`kTypeMerge`), `DBIter::FindNextUserEntry()`
advances the underlying iterator _past_ the current key (`saved_key_`); see
`MergeValuesNewToOld()`. However, `FindPrevUserKey()` assumes that `iter_`
points to an entry with the same user key as `saved_key_`. As a result,
`it->Seek(key) && it->Prev()` can cause the iterator to be positioned at the
_next_, instead of the previous, entry (new test, written by @lovro, reproduces
the bug).
This diff changes `FindPrevUserKey()` to also skip keys that are _greater_ than
`saved_key_`.
Test Plan: db_test
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba, lovro
Differential Revision: https://reviews.facebook.net/D40791
Summary: Make column_family_test runnable in ROCKSDB_LITE.
Test Plan: column_family_test
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40251
Summary: It's not really nice to call user's API with garbage data in new_value. This diff makes sure that new_value is empty before calling the merge operator.
Test Plan: Added assert to Merge operator in merge_test
Reviewers: sdong, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40773
Summary:
Fixes task 7156865 where a compaction causes a hang in flush
memtable if CancelAllBackgroundWork was called prior to it.
Stack trace is in : https://phabricator.fb.com/P19848829
We end up waiting for a flush which will never happen because there are no background threads.
Test Plan: PreShutdownFlush
Reviewers: sdong, igor
Reviewed By: sdong, igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40617
Summary: #7124486: RocksDB's Iterator.SeekToLast should seek to the last key before iterate_upper_bound if presents
Test Plan: ./db_iter_test run successfully with the new testcase
Reviewers: rven, yhchiang, igor, anthony, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40425
Summary: Make table_properties_collector_test runnable in ROCKSDB_LITE
Test Plan: table_properties_collector_test
Reviewers: sdong, rven, anthony, kradhakrishnan, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40581
Summary: Replace force_bottommost_level_compaction in CompactRangeOption with an option that allow the user to (always skip, always compact, compact if compaction filter is present) the bottommost level for level based compaction.
Test Plan: make check
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40527
Summary:
Implementation of a table-level row cache.
It only caches point queries done through the `DB::Get` interface, queries done through the `Iterator` interface will completely skip the cache.
Supports snapshots and merge operations.
Test Plan: Ran `make valgrind_check commit-prereq`
Reviewers: igor, philipp, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39849
Summary:
The "one size fits all" approach with WAL recovery will only introduce inconvenience for our varied clients as we go forward. The current recovery is a bit heuristic. We introduce the following levels of consistency while replaying the WAL.
1. RecoverAfterRestart (kTolerateCorruptedTailRecords)
This mocks the current recovery mode.
2. RecoverAfterCleanShutdown (kAbsoluteConsistency)
This is ideal for unit test and cases where the store is shutdown cleanly. We tolerate no corruption or incomplete writes.
3. RecoverPointInTime (kPointInTimeRecovery)
This is ideal when using devices with controller cache or file systems which can loose data on restart. We recover upto the point were is no corruption or incomplete write.
4. RecoverAfterDisaster (kSkipAnyCorruptRecord)
This is ideal mode to recover data. We tolerate corruption and incomplete writes, and we hop over those sections that we cannot make sense of salvaging as many records as possible.
Test Plan:
(1) Run added unit test to cover all levels.
(2) Run make check.
Reviewers: leveldb, sdong, igor
Subscribers: yoshinorim, dhruba
Differential Revision: https://reviews.facebook.net/D38487
Summary: Fixing bad merge
Test Plan: make -j64 check (this is not enough to verify the fix)
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40521
Summary:
When there are multiple column families, the flush in
GetLiveFiles is not atomic, so that there are entries in the wal files
which are needed to get a consisten RocksDB. We now add the log files to
the checkpoint.
Test Plan:
CheckpointCF - This test forces more data to be written to
the other column families after the flush of the first column family but
before the second.
Reviewers: igor, yhchiang, IslamAbdelRahman, anthony, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40323
Summary: CompressLevelCompaction() depends on Zlib. We should skip it when zlib is not present.
Test Plan: `make check` without zlib
Reviewers: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40401
Summary:
Currently RocksDB silently ignores this issue and doesn't compress the data. Based on discussion, we agree that this is pretty bad because it can cause confusion for our users.
This patch fails DB::Open() if we don't support the compression that is specified in the options.
Test Plan: make check with LZ4 not present. If Snappy is not present all tests will just fail because Snappy is our default library. We should make Snappy the requirement, since without it our default DB::Open() fails.
Reviewers: sdong, MarkCallaghan, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39687
Summary:
This is https://reviews.facebook.net/D39999 but after introducing an option to force compaction the bottom most level
Changes in this patch
- Introduce force_bottommost_level_compaction to CompactRangeOptions that force compacting bottommost level during compaction
- Skip bottommost level compaction if we dont have a compaction filter and force_bottommost_level_compaction options is not set
Although tests pass on my machine but I suspect that there maybe some tests that I am not aware of that should use force_bottommost_level_compaction to pass in a deterministic way
Test Plan:
make check
adding new tests
Reviewers: igor, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40059
Summary: Currently we dump DBOptions for each column family options we dump. This leads to duplicate lines in our LOG file. This diff fixes that.
Test Plan: Check out the LOG
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: IslamAbdelRahman, yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39729
Summary:
Universal compaction can involves in multiple levels. However,
the current implementation of bytes_readn and bytes_readnp1
(and some other stats with postfix `n` and `np1`) assumes compaction
can only have two levels.
This patch fixes this bug and redefines bytes_readn and bytes_readnp1:
* bytes_readnp1: the number of bytes read in the compaction output level.
* bytes_readn: the total number of bytes read minus bytes_readnp1
Test Plan: Add a test in compaction_job_stats_test
Reviewers: igor, sdong, rven, anthony, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40239
Summary:
So far, we benchmarked RocksDB by writing as fast as possible. With this change, we're able to limit our write throughput, which should help us better understand how RocksDB performes under varying write workloads.
Specifically, I'm currently interested in the shape of the graph that has write throughput on one axis and write rate on another. This should help us with designing our stall system, as we have started to do with D36351.
Test Plan:
$ ./db_bench --benchmarks=fillrandom --benchmark_write_rate_limit=1000000
fillrandom : 118.523 micros/op 8437 ops/sec; 0.9 MB/s
$ ./db_bench --benchmarks=fillrandom --benchmark_write_rate_limit=2000000
fillrandom : 59.136 micros/op 16910 ops/sec; 1.9 MB/s
Reviewers: MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39759
Summary:
This diff update DB::CompactRange to use RangeCompactionOptions instead of using multiple parameters
Old CompactRange is still available but deprecated
Test Plan:
make all check
make rocksdbjava
USE_CLANG=1 make all
OPT=-DROCKSDB_LITE make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40209
Summary:
We go to great lengths to make sure MaybeScheduleFlushOrCompaction() is called outside of write thread. But anyway, it's still called in the mutex, so it's not that much cheaper.
This diff removes the "optimization" and cleans up the code a bit.
Test Plan: make check
Reviewers: rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40113
Summary: Block c_test in ROCKSDB_LITE as it's not supported in ROCKSDB_LITE.
Test Plan: c_test
Reviewers: sdong, rven, anthony, kradhakrishnan, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40257
Summary:
Add an option in GetApproximateSize() so that the result will include estimated sizes in mem tables.
To implement it, implement an estimated count from the beginning to a key in skip list. The approach is to count to find the entry, how many Next() is issued from each level, and sum them with a weight that is <branching factor> ^ <level>.
Test Plan: Add a test case
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40119
Summary:
This is part of an effort to better understand and optimize RocksDB stalls under high load. I added a feature to db_bench to periodically write QPS to CSV files. That way we can nicely see how our QPS changes in time (especially when DB is stalled) and can do a better job of evaluating our stall system (i.e. we want the QPS to be as constant as possible, as opposed to having bunch of stalls)
Cool part of CSV files is that we can easily graph them -- there are a bunch of tools available.
Test Plan:
Ran ./db_bench --report_interval_seconds=10 --benchmarks=fillrandom --num=10000000
and observed this in report.csv:
secs_elapsed,interval_qps
10,2725860
20,1980480
30,1863456
40,1454359
50,1460389
Reviewers: sdong, MarkCallaghan, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40047
Summary: Fixed false alarm of size comparison in compaction_job_stats_test
Test Plan: compaction_job_stats_test
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39921
Summary:
Reverting this diff https://reviews.facebook.net/D39999
Will add an option to force bottom most level compaction and then re submit it
Test Plan: make check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40041
Summary: If we don't have a compaction filter then we can skip compacting the bottom most level
Test Plan:
make check
added unit tests
Reviewers: yhchiang, sdong, igor
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39999
Summary:
We slow down data into the database to the rate of options.delayed_write_rate (a new option) with this patch.
The thread synchronization approach I take is to still synchronize write controller by DB mutex and GetDelay() is inside DB mutex. Try to minimize the frequency of getting time in GetDelay(). I verified it through db_bench and it seems to work
hard_rate_limit is deprecated.
options.delayed_write_rate is still not dynamically changeable. Need to work on it as a follow-up.
Test Plan: Add new unit tests in db_test
Reviewers: yhchiang, rven, kradhakrishnan, anthony, MarkCallaghan, igor
Reviewed By: igor
Subscribers: ikabiljo, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36351
Summary: With experimental feature SuggestCompactRange() we don't restrict running two L0->L1 compactions in parallel. This diff fixes this.
Test Plan: added a unit test to reproduce the failure. fixed the unit test
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39981
Summary:
Adding largest sequence number to FlushJobInfo
and passing flushed file metadata to NotifyOnFlushCompleted which include alot of other values that we may want to expose in FlushJobInfo
Test Plan: make check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39927
Summary:
Add Env::GetThreadID(), which returns the ID of the current thread.
In addition, make GetThreadList() and InfoLog use same unique ID for the same thread.
Test Plan:
db_test
listener_test
Reviewers: igor, rven, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39735
Summary:
Right now the level we pass to ReFitLevel is the maximum level with files (before compaction), there are multiple cases where this maximum level have changed after compaction
- all files where in L0 (now maximum level is L1)
- using kCompactionStyleUniversal (now maximum level in the last level)
- level_compaction_dynamic_level_bytes ??
We can handle each of these cases individually, but I felt it's safer to calculate max_level_with_files again if we want to do a ReFitLevel
Test Plan:
adding some tests
make -j64 check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: ott, dhruba
Differential Revision: https://reviews.facebook.net/D39663
Summary: Some test and benchmark codes don't build for CYGWIN. Fix it.
Test Plan: Build "make all" with TARGET_OS=Cygwin on cygwin and make sure it passes.
Reviewers: rven, yhchiang, anthony, igor, kradhakrishnan
Reviewed By: igor, kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39711
Summary:
When there are files marked for compaction after compactions, print extra messages to help debugging. Example:
2015/06/08-23:12:55.212855 7ff5013ff700 [default] [JOB 121] Generated table #75: 54 keys, 4807 bytes (need compaction)
2015/06/08-23:12:55.556194 7ff5013ff700 (Original Log Time 2015/06/08-23:12:55.556160) [default] compacted to: base level 1 max bytes base
10240 files[0 1 9 32 12 0 0 0] max score 0.96 (2 files need compaction), MB/sec: 0.0 rd, 0.1 wr, level 2, files in(1, 3) out(5) MB in(0.0,
0.0) out(0.0), read-write-amplify(11.3) write-amplify(5.7) OK, records in: 40, records dropped: 0
Test Plan:
Run test and see LOG files.
valgrind test DBTest.TablePropertiesNeedCompactTest
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39771
Summary:
There is a hang during DB close in the following scenario:
a) a load with WAL disabled was done,
b) CancelAllBackgroundWork was called,
c) DB Close was called
This was because in that we will wait for a flush but we cannot do a
background flush because we have called CancelAllBackgroundWork which
marks the DB as shutting downn.
Test Plan: Added DBTest FlushOnDestroy
Reviewers: sdong
Reviewed By: sdong
Subscribers: yoshinorim, hermanlee4, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39747
Summary: We currently issue malloc and free inside DB mutex in GetSnapshot() and ReleaseSnapshot(). Move them out.
Test Plan:
Go through all tests
make valgrind_check
Reviewers: yhchiang, rven, IslamAbdelRahman, anthony, igor
Reviewed By: igor
Subscribers: maykov, hermanlee4, MarkCallaghan, yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39753
Summary:
Replacing the default value for compaction_filter_factory and compaction_filter_factory_v2 to be nullptr instead of DefaultCompactionFilterFactory / DefaultCompactionFilterFactoryV2
The reason for this is to be able to determine easily if we have compaction filter factory or not without depending on RTTI
Test Plan: make check
Reviewers: yoshinorim, ott, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39693
Summary: key_sizes claims that 3rd key is of length 8, but it's really only 3. This diff makes it length 8.
Test Plan: asan c_test works again.
Reviewers: sdong, yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39699
Summary:
It is experimental. Allow users to return from a call back function TablePropertiesCollector::NeedCompact(), based on the data in the file.
It can be used to allow users to suggest DB to clear up delete tombstones faster.
Test Plan: Add a unit test.
Reviewers: igor, yhchiang, kradhakrishnan, rven
Reviewed By: rven
Subscribers: yoshinorim, MarkCallaghan, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39585
Summary:
EventListener::OnFlushCompleted() now passes a structure instead
of a list of parameters. This minimizes the API change in the
future.
Test Plan:
listener_test
compact_files_test
example/compact_files_example
Reviewers: kradhakrishnan, sdong, IslamAbdelRahman, rven, igor
Reviewed By: rven, igor
Subscribers: IslamAbdelRahman, rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39543
Summary: I encountered an issue where the database hang, it looks like the mutex is not unlocked on return in ReFitLevel function
Test Plan: make -j64 check
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39609
Summary:
The type of smallest_output_key_prefix and largest_output_key_prefix
have been changed to std::string in https://reviews.facebook.net/D39537.
As a result, we shouldn't do smallest_output_key_prefix[0] = 0 in the
initialization.
Test Plan: compile db_test with tsan enabled and repeat DBTest.CompactionDeletionTrigger test to verify the tsan issue has been gone.
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39645
Dmitri Smirnov