Summary:
Up until this point we had DbOptions.num_subcompactions, but
it is semantically more correct to call this max_subcompactions since
we will schedule *up to* DbOptions.max_subcompactions smaller compactions
at a time during a compaction job.
I also added a --subcompactions option to db_bench
Test Plan: make all make check
Reviewers: sdong, igor, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D45069
Summary: Add more test cases of data race causing wrong iterating results. Tag tests not passing as DISABLED_
Test Plan: Run the tests
Reviewers: igor, rven, IslamAbdelRahman, anthony, kradhakrishnan, yhchiang
Reviewed By: yhchiang
Subscribers: tnovak, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44907
Summary: Currently compaction inputs share the same file descriptor and table reader as other foreground threads. It makes fadvise works less predictable. Add options.new_table_reader_for_compaction_inputs to enforce to create a new file descriptor and new table reader for it.
Test Plan: Add the option.
Reviewers: rven, anthony, kradhakrishnan, IslamAbdelRahman, igor, yhchiang
Reviewed By: igor
Subscribers: igor, MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43311
Summary:
Add a counter of estimated bytes the DB needs to compact for all the compactions to finish. Expose it as a DB Property.
In the future, we can use threshold of this counter to replace soft rate limit and hard rate limit. A single threshold of estimated compaction debt in bytes will be easier for users to reason about when should slow down and stopping than more abstract soft and hard rate limits.
Test Plan: Add unit tests
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44205
Summary:
Currently, ThreadStatusFlush uses two sync-points to ensure
there's a flush currently running when calling GetThreadList().
However, one of the sync-point is inside db-mutex, which could
cause deadlock in case there's a DB::Get() call.
This patch fix this issue by moving the sync-point to a better
place where the flush job does not hold the mutex.
Test Plan: db_test
Reviewers: igor, sdong, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45045
Summary: Add a new DB property that calculate the total size of files used by all RocksDB Versions
Test Plan: Unittests for the new property
Reviewers: igor, yhchiang, anthony, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D44799
Summary: Removing two unused variables that prevented compilation.
Test Plan: make all
Reviewers: rven, sdong, yhchiang, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D44991
Summary:
This diff improves the memory utilization for tailing iterators RocksDB,
by freeing file iterators which are over the upper bound.
It is an updating on Siying's original diff for improving the memory usage for
tailing iterators. The changes for the seek and next path are now complete
and a test has been added to exercise these paths while deleting file iterators
which are above the upper bound.
Test Plan: db_tailing_iter_test.TailingIteratorTrimSeekToNext
Reviewers: march, tnovak, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D43833
Summary: Update DestroyDB so that all SST files in the first path id go through DeleteScheduler instead of being deleted immediately
Test Plan: added a unittest
Reviewers: igor, yhchiang, anthony, kradhakrishnan, rven, sdong
Reviewed By: sdong
Subscribers: jeanxu2012, dhruba
Differential Revision: https://reviews.facebook.net/D44955
Summary:
Currently, GetIntProperty("rocksdb.cur-size-all-mem-tables") only returns
the memory usage by those memtables which have not yet been flushed.
This patch introduces GetIntProperty("rocksdb.size-all-mem-tables"),
which includes the memory usage by all the memtables, includes those
have been flushed but pinned by iterators.
Test Plan: Added a test in db_test
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D44229
Summary: There is a check to fail the iterator if prefix extractor is specified but upper bound is out of the prefix for the seek key. Relax this constraint to allow users to set upper bound to the next prefix of the current one.
Test Plan: make commit-prereq
Reviewers: igor, anthony, kradhakrishnan, yhchiang, rven
Reviewed By: rven
Subscribers: tnovak, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44949
Summary:
A couple variables were declared but only used in assertions
which causes issues when building in fbcode.
Test Plan: make dbg and make release
Reviewers: yhchiang, sdong, igor, anthony, MarkCallaghan
Reviewed By: MarkCallaghan
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D44937
Summary:
In D43239 (https://reviews.facebook.net/D43239) the number
of subcompactions is set based on the number of L1 files with
unique starting keys. In certain cases when this number is very large
this causes issues, particularly with the overlap between files since
very small output files can be generated. This diff bounds the number
of subcompactions to the user option DBOption.num_subcompactions.
Test Plan: ./db_test ./db_compaction_test
Reviewers: sdong, igor, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D44883
Summary:
Reseek mutable_iter if it is invalid in Next and immutable_iter
is invalid.
Test Plan: DBTestTailingIterator.TailingIteratorSeekToNext
Reviewers: tnovak, march, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D44865
Summary:
In D43239 (https://reviews.facebook.net/D43239) there is an
assertion to make sure a subcompaction's output is never empty at the
end of execution. This assertion however breaks the build because some
tests lead to exactly that scenario. So instead I have altered the logic
to handle this case instead of just failing the assertion.
The reason that it is possible for a subcompaction's output to be empty is
that during a sequential execution of subcompactions, if a user aborts the
compaction job then some of the later subcompactions to be executed may
have yet to process any keys and therefore have yet to generate output files.
This becomes very rare once the subcompactions are executed in parallel,
but for now they are still sequential so the case is possible when there is an
early termination, as in some of the tests.
Test Plan: ./db_test ./db_compaction_test
Reviewers: sdong, igor, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D44877
Summary:
In prepration for running multiple threads at the same time during
a compaction job, this patch assigns each subcompaction its own state
(instead of sharing the one global CompactionState). Each subcompaction then
uses this state to update its statistics, keep track of its snapshots, etc.
during the course of execution. Then at the end of all the executions the
statistics are aggregated across the subcompactions so that the final result
is the same as if only one larger compaction had run.
Test Plan: ./db_test ./db_compaction_test ./compaction_job_test
Reviewers: sdong, anthony, igor, noetzli, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43239
Summary:
While working on supporting mixing merge operators with
single deletes ( https://reviews.facebook.net/D43179 ),
I realized that returning and dealing with merge results
can be made simpler. Submitting this as a separate diff
because it is not directly related to single deletes.
Before, callers of merge helper had to retrieve the merge
result in one of two ways depending on whether the merge
was successful or not (success = result of merge was single
kTypeValue). For successful merges, the caller could query
the resulting key/value pair and for unsuccessful merges,
the result could be retrieved in the form of two deques of
keys and values. However, with single deletes, a successful merge
does not return a single key/value pair (if merge
operands are merged with a single delete, we have to generate
a value and keep the original single delete around to make
sure that we are not accidentially producing a key overwrite).
In addition, the two existing call sites of the merge
helper were taking the same actions independently from whether
the merge was successful or not, so this patch simplifies that.
Test Plan: make clean all check
Reviewers: rven, sdong, yhchiang, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43353
Summary: In internal stats, remember read latency histogram, if statistics is enabled. It can be retrieved from DB::GetProperty() with "rocksdb.dbstats" property, if it is enabled.
Test Plan: Manually run db_bench and prints out "rocksdb.dbstats" by hand and make sure it prints out as expected
Reviewers: igor, IslamAbdelRahman, rven, kradhakrishnan, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44193
Summary:
This diff allows a Writer to join the next write batch group
without acquiring any locks. Waiting is performed via a per-Writer mutex,
so all of the non-leader writers never need to acquire the db mutex.
It is now possible to join a write batch group after the leader has been
chosen but before the batch has been constructed. This diff doesn't
increase parallelism, but reduces synchronization overheads.
For some CPU-bound workloads (no WAL, RAM-sized working set) this can
substantially reduce contention on the db mutex in a multi-threaded
environment. With T=8 N=500000 in a CPU-bound scenario (see the test
plan) this is good for a 33% perf win. Not all scenarios see such a
win, but none show a loss. This code is slightly faster even for the
single-threaded case (about 2% for the CPU-bound scenario below).
Test Plan:
1. unit tests
2. COMPILE_WITH_TSAN=1 make check
3. stress high-contention scenarios with db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=0 --num=$N -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000
Reviewers: sdong, igor, rven, ljin, yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D43887
Summary:
Add options.compaction_measure_io_stats to print out / pass to listener accumulated time spent on write calls. Example outputs in info logs:
2015/08/12-16:27:59.463944 7fd428bff700 (Original Log Time 2015/08/12-16:27:59.463922) EVENT_LOG_v1 {"time_micros": 1439422079463897, "job": 6, "event": "compaction_finished", "output_level": 1, "num_output_files": 4, "total_output_size": 6900525, "num_input_records": 111483, "num_output_records": 106877, "file_write_nanos": 15663206, "file_range_sync_nanos": 649588, "file_fsync_nanos": 349614797, "file_prepare_write_nanos": 1505812, "lsm_state": [2, 4, 0, 0, 0, 0, 0]}
Add two more counters in iostats_context.
Also add a parameter of db_bench.
Test Plan: Add a unit test. Also manually verify LOG outputs in db_bench
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44115
Summary: Iterator has a bug: if a child iterator reaches its end, and user issues a Prev(), and just before SeekToLast() of the child iterator is called, some extra rows is added in the end, the position of iterator can be misplaced.
Test Plan: Run the tests with or without valgrind
Reviewers: rven, yhchiang, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: tnovak, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43671
Summary:
Initial implementation of Pessimistic Transactions. This diff contains the api changes discussed in D38913. This diff is pretty large, so let me know if people would prefer to meet up to discuss it.
MyRocks folks: please take a look at the API in include/rocksdb/utilities/transaction[_db].h and let me know if you have any issues.
Also, you'll notice a couple of TODOs in the implementation of RollbackToSavePoint(). After chatting with Siying, I'm going to send out a separate diff for an alternate implementation of this feature that implements the rollback inside of WriteBatch/WriteBatchWithIndex. We can then decide which route is preferable.
Next, I'm planning on doing some perf testing and then integrating this diff into MongoRocks for further testing.
Test Plan: Unit tests, db_bench parallel testing.
Reviewers: igor, rven, sdong, yhchiang, yoshinorim
Reviewed By: sdong
Subscribers: hermanlee4, maykov, spetrunia, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40869
Summary: Add a new option that all LoadTableHandlers to use multiple threads to load files on DB Open and Recover
Test Plan:
make check -j64
COMPILE_WITH_TSAN=1 make check -j64
DISABLE_JEMALLOC=1 make all valgrind_check -j64 (still running)
Reviewers: yhchiang, anthony, rven, kradhakrishnan, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D43755
Summary:
While working on single delete support for db_bench, I realized that
db_bench/db_stress contain a bunch of duplicate code related to
copmression and found some typos. This patch removes duplicate code,
typos and a redundant #ifndef in internal_stats.cc.
Test Plan: make db_stress && make db_bench && ./db_bench --benchmarks=compress,uncompress
Reviewers: yhchiang, sdong, rven, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43965
Summary:
Key comparison is the single largest CPU user for CPU-bound
workloads. This diff reduces the number of comparisons in two ways.
The first is that it moves predecessor array gathering from
FindGreaterOrEqual to FindLessThan, so that FindGreaterOrEqual can
return immediately if compare_ returns 0. As part of this change I
moved the sequential insertion optimization into Insert, to remove the
undocumented (and smelly) requirement that prev must be equal to prev_
if it is non-null.
The second optimization is that all of the search functions skip calling
compare_ when moving to a lower level that has the same Next pointer.
With a branching factor of 4 we would expect this to happen 1/4 of
the time.
On a single-threaded CPU-bound workload (-benchmarks=fillrandom -threads=1
-batch_size=1 -memtablerep=skip_list -value_size=0 --num=1600000
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000)
on my dev server this is good for a 7% perf win.
Test Plan: unit tests
Reviewers: rven, ljin, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D43233
Summary:
Changed compaction_job_test to support better/more thorough
tests and added two tests. Also changed MockFileContents
to order using InternalKeyComparator.
Test Plan: make compaction_job_test && ./compaction_job_test; make all && make check
Reviewers: sdong, rven, igor, yhchiang, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42837
Summary: Implemented this simple wrapper for something else I was working on. Seemed like it makes sense to expose it instead of burying it in some random code.
Test Plan: added test
Reviewers: rven, kradhakrishnan, sdong, yhchiang
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43293
Summary:
Visual Studio complains about deque<LogWriterNumber> because LogWriterNumber is non-copyable for its unique_ptr member writer. Move away from it, and do explit free.
It is less safe but I can't think of a better way to unblock it.
Test Plan: valgrind check test
Reviewers: anthony, IslamAbdelRahman, kolmike, rven, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43647
Summary:
When seeking to the last occurrence of a key with sequence number 0, db_iter
ends up in an endless loop because it seeks to type kValueTypeForSeek
which is larger than kTypeDeletion/kTypeValue. Added test case that triggers
the behavior.
Test Plan: make clean all check
Reviewers: igor, rven, anthony, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43653
Summary: Update DeleteScheduler tests so that they verify the used penalties for waiting instead of measuring the time spent which is not reliable
Test Plan:
make -j64 delete_scheduler_test && ./delete_scheduler_test
COMPILE_WITH_TSAN=1 make -j64 delete_scheduler_test && ./delete_scheduler_test
COMPILE_WITH_ASAN=1 make -j64 delete_scheduler_test && ./delete_scheduler_test
make -j64 db_test && ./db_test --gtest_filter="DBTest.RateLimitedDelete:DBTest.DeleteSchedulerMultipleDBPaths"
COMPILE_WITH_TSAN=1 make -j64 db_test && ./db_test --gtest_filter="DBTest.RateLimitedDelete:DBTest.DeleteSchedulerMultipleDBPaths"
COMPILE_WITH_ASAN=1 make -j64 db_test && ./db_test --gtest_filter="DBTest.RateLimitedDelete:DBTest.DeleteSchedulerMultipleDBPaths"
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D43635
Summary: The list of info log files of a db can be obtained using the new function.
Test Plan: New test in db_test.cc passed.
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: IslamAbdelRahman, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D41715
Summary:
Add two unit tests for SyncWAL(). One makes sure SyncWAL() doesn't block writes in the other thread. Another one makes sure SyncWAL() doesn't wait ongoing writes to finish before being executed.
Create a new test file db_wal_test and move two WAL related tests from db_test to here.
Test Plan: Run the new tests
Reviewers: IslamAbdelRahman, rven, kradhakrishnan, kolmike, tnovak, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43605
Summary: Measure read latency histogram and put in statistics. Compaction inputs are excluded from it when possible (unfortunately usually no possible as we usually take table reader from table cache.
Test Plan:
Run db_bench and it shows the stats, like:
rocksdb.sst.read.micros statistics Percentiles :=> 50 : 1.238522 95 : 2.529740 99 : 3.912180
Reviewers: kradhakrishnan, rven, anthony, IslamAbdelRahman, MarkCallaghan, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43275
Summary: This patch will fix the false positive of DBTest.FlushSchedule under TSAN, we dont need to disable this test
Test Plan: COMPILE_WITH_TSAN=1 make -j64 db_test && ./db_test --gtest_filter="DBTest.FlushSchedule"
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D43599
Summary:
While doing forward iterating, if current key is merge, internal iterator position is placed to the next key. If Prev() is called now, needs to do extra Prev() to recover the location.
This is second attempt of fixing after reverting ec70fea4c4. This time shrink the fix to only merge key is the current key and avoid the reseeking logic for max_iterating skipping
Test Plan: enable the two disabled tests and make sure they pass
Reviewers: rven, IslamAbdelRahman, kradhakrishnan, tnovak, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43557
Summary:
While working on https://reviews.facebook.net/D43179 , I found
duplicate code in the tests. This patch removes it.
Test Plan: make clean all check
Reviewers: igor, sdong, rven, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43263
Summary:
Subj. We really need this feature.
Previous diff D40899 has most of the changes to make this possible, this diff just adds the method.
Test Plan: `make check`, the new test fails without this diff; ran with ASAN, TSAN and valgrind.
Reviewers: igor, rven, IslamAbdelRahman, anthony, kradhakrishnan, tnovak, yhchiang, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, maykov, hermanlee4, yoshinorim, tnovak, dhruba
Differential Revision: https://reviews.facebook.net/D40905
Summary:
Updated DBTest DBCompactionTest and CompactionJobStatsTest
to run compaction-related tests once with subcompactions enabled and
once disabled using the TEST_P test type in the Google Test suite.
Test Plan: ./db_test ./db_compaction-test ./compaction_job_stats_test
Reviewers: sdong, igor, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43443
Summary:
Introduce DeleteScheduler that allow enforcing a rate limit on file deletion
Instead of deleting files immediately, files are moved to trash directory and deleted in a background thread that apply sleep penalty between deletes if needed.
I have updated PurgeObsoleteFiles and PurgeObsoleteWALFiles to use the delete_scheduler instead of env_->DeleteFile
Test Plan:
added delete_scheduler_test
existing unit tests
Reviewers: kradhakrishnan, anthony, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D43221
Summary:
Make DBCompactionTest.SkipStatsUpdateTest more stable by
removing flaky but unnecessary assertion on the size of db
as simply checking the random file open count is suffice.
Test Plan: db_compaction_test
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43533
Summary:
UpdateAccumulatedStats() is used to optimize compaction decision
esp. when the number of deletion entries are high, but this function
can slowdown DBOpen esp. in disk environment.
This patch adds DBOptions::skip_sats_update_on_db_open, which skips
UpdateAccumulatedStats() in DB::Open() time when it's set to true.
Test Plan: Add DBCompactionTest.SkipStatsUpdateTest
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: tnovak, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42843
Summary:
The compact files API had a bug where some overlapping files
are not added. These are files which overlap with files which were
added to the compaction input files, but not to the original set of
input files. This happens only when there are more than two levels
involved in the compaction. An example will illustrate this better.
Level 2 has 1 input file 1.sst which spans [20,30].
Level 3 has added file 2.sst which spans [10,25]
Level 4 has file 3.sst which spans [35,40] and
input file 4.sst which spans [46,50].
The existing code would not add 3.sst to the set of input_files because
it only becomes an overlapping file in level 4 and it wasn't one in
level 3.
When installing the results of the compaction, 3.sst would overlap with
output file from the compact files and result in the assertion in
version_set.cc:1130
// Must not overlap
assert(level <= 0 || level_files->empty() ||
internal_comparator_->Compare(
(*level_files)[level_files->size() - 1]->largest, f->smallest) <
0);
This change now adds overlapping files from the current level to the set
of input files also so that we don't hit the assertion above.
Test Plan:
d=/tmp/j; rm -rf $d; seq 1000 | parallel --gnu --eta
'd=/tmp/j/d-{}; mkdir -p $d; TEST_TMPDIR=$d ./db_compaction_test
--gtest_filter=*CompactilesOnLevel* --gtest_also_run_disabled_tests >&
'$d'/log-{}'
Reviewers: igor, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43437
Ari Ekmekji