Summary:
The primary purpose of the FactoryFunc was to support LITE mode where the ObjectRegistry was not available. With the removal of LITE mode, the function was no longer required.
Note that the MergeOperator had some private classes defined in header files. To gain access to their constructors (and name methods), the class definitions were moved into header files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11203
Reviewed By: cbi42
Differential Revision: D43160255
Pulled By: pdillinger
fbshipit-source-id: f3a465fd5d1a7049b73ecf31e4b8c3762f6dae6c
Summary:
The new `MultiGetEntity` API can be used to get a consistent view of
a batch of keys, with the results presented as wide-column entities.
Similarly to `GetEntity` and the iterator's `columns` API, if the entry
corresponding to the key is a wide-column entity to start with, it is
returned as-is, and if it is a plain key-value, it is wrapped into an entity
with a single default column.
Implementation-wise, the new API shares the logic of the batched `MultiGet`
API (via the `MultiGetCommon` methods). Both single-CF and multi-CF
`MultiGetEntity` APIs are provided, and blobs are also supported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11222
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D43256950
Pulled By: ltamasi
fbshipit-source-id: 47fb2cb7e2d0470e3580f43fdb2fe9e51f0e7005
Summary:
The definition of the Cache class should not be needed by the vast majority of RocksDB users, so I think it is just distracting to include it in cache.h, which is primarily needed for configuring and creating caches. This change moves the class to a new header advanced_cache.h. It is just cut-and-paste except for modifying the class API comment.
In general, operations on shared_ptr<Cache> should continue to work when only a forward declaration of Cache is available, as long as all the Cache instances provided are already shared_ptr. See https://stackoverflow.com/a/17650101/454544
Also, the most common way to customize a Cache is by wrapping an existing implementation, so it makes sense to provide CacheWrapper in the public API. This was a cut-and-paste job except removing the implementation of Name() so that derived classes must provide it.
Intended follow-up: consolidate Release() into one function to reduce customization bugs / confusion
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11192
Test Plan: `make check`
Reviewed By: anand1976
Differential Revision: D43055487
Pulled By: pdillinger
fbshipit-source-id: 7b05492df35e0f30b581b4c24c579bc275b6d110
Summary:
**Context/Summary:**
As instructed by convenience.h comments, a few deprecated APIs are removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11120
Test Plan:
- make check & CI
- eyeball check on test semantics.
Reviewed By: pdillinger
Differential Revision: D42937507
Pulled By: hx235
fbshipit-source-id: a9e4709387da01b1d0e9148c2e210f02e9746ee1
Summary:
We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support.
Most of changes were done through following comments:
unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'`
by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147
Test Plan: See CI
Reviewed By: pdillinger
Differential Revision: D42796341
fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2
Summary:
Like other versions before, gcc 13 moved some includes around and as a result <cstdint> is no longer transitively included [1]. Explicitly include it for uint{32,64}_t.
[1] https://gcc.gnu.org/gcc-13/porting_to.html#header-dep-changes
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11118
Reviewed By: cbi42
Differential Revision: D42711356
Pulled By: ajkr
fbshipit-source-id: 5ea257b85b7017f40fd8fdbce965336da95c55b2
Summary:
Compressed block cache is replaced by compressed secondary cache. Remove the feature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11117
Test Plan: See CI passes
Reviewed By: pdillinger
Differential Revision: D42700164
fbshipit-source-id: 6cbb24e460da29311150865f60ecb98637f9f67d
Summary:
This is several refactorings bundled into one to avoid having to incrementally re-modify uses of Cache several times. Overall, there are breaking changes to Cache class, and it becomes more of low-level interface for implementing caches, especially block cache. New internal APIs make using Cache cleaner than before, and more insulated from block cache evolution. Hopefully, this is the last really big block cache refactoring, because of rather effectively decoupling the implementations from the uses. This change also removes the EXPERIMENTAL designation on the SecondaryCache support in Cache. It seems reasonably mature at this point but still subject to change/evolution (as I warn in the API docs for Cache).
The high-level motivation for this refactoring is to minimize code duplication / compounding complexity in adding SecondaryCache support to HyperClockCache (in a later PR). Other benefits listed below.
* static_cast lines of code +29 -35 (net removed 6)
* reinterpret_cast lines of code +6 -32 (net removed 26)
## cache.h and secondary_cache.h
* Always use CacheItemHelper with entries instead of just a Deleter. There are several motivations / justifications:
* Simpler for implementations to deal with just one Insert and one Lookup.
* Simpler and more efficient implementation because we don't have to track which entries are using helpers and which are using deleters
* Gets rid of hack to classify cache entries by their deleter. Instead, the CacheItemHelper includes a CacheEntryRole. This simplifies a lot of code (cache_entry_roles.h almost eliminated). Fixes https://github.com/facebook/rocksdb/issues/9428.
* Makes it trivial to adjust SecondaryCache behavior based on kind of block (e.g. don't re-compress filter blocks).
* It is arguably less convenient for many direct users of Cache, but direct users of Cache are now rare with introduction of typed_cache.h (below).
* I considered and rejected an alternative approach in which we reduce customizability by assuming each secondary cache compatible value starts with a Slice referencing the uncompressed block contents (already true or mostly true), but we apparently intend to stack secondary caches. Saving an entry from a compressed secondary to a lower tier requires custom handling offered by SaveToCallback, etc.
* Make CreateCallback part of the helper and introduce CreateContext to work with it (alternative to https://github.com/facebook/rocksdb/issues/10562). This cleans up the interface while still allowing context to be provided for loading/parsing values into primary cache. This model works for async lookup in BlockBasedTable reader (reader owns a CreateContext) under the assumption that it always waits on secondary cache operations to finish. (Otherwise, the CreateContext could be destroyed while async operation depending on it continues.) This likely contributes most to the observed performance improvement because it saves an std::function backed by a heap allocation.
* Use char* for serialized data, e.g. in SaveToCallback, where void* was confusingly used. (We use `char*` for serialized byte data all over RocksDB, with many advantages over `void*`. `memcpy` etc. are legacy APIs that should not be mimicked.)
* Add a type alias Cache::ObjectPtr = void*, so that we can better indicate the intent of the void* when it is to be the object associated with a Cache entry. Related: started (but did not complete) a refactoring to move away from "value" of a cache entry toward "object" or "obj". (It is confusing to call Cache a key-value store (like DB) when it is really storing arbitrary in-memory objects, not byte strings.)
* Remove unnecessary key param from DeleterFn. This is good for efficiency in HyperClockCache, which does not directly store the cache key in memory. (Alternative to https://github.com/facebook/rocksdb/issues/10774)
* Add allocator to Cache DeleterFn. This is a kind of future-proofing change in case we get more serious about using the Cache allocator for memory tracked by the Cache. Right now, only the uncompressed block contents are allocated using the allocator, and a pointer to that allocator is saved as part of the cached object so that the deleter can use it. (See CacheAllocationPtr.) If in the future we are able to "flatten out" our Cache objects some more, it would be good not to have to track the allocator as part of each object.
* Removes legacy `ApplyToAllCacheEntries` and changes `ApplyToAllEntries` signature for Deleter->CacheItemHelper change.
## typed_cache.h
Adds various "typed" interfaces to the Cache as internal APIs, so that most uses of Cache can use simple type safe code without casting and without explicit deleters, etc. Almost all of the non-test, non-glue code uses of Cache have been migrated. (Follow-up work: CompressedSecondaryCache deserves deeper attention to migrate.) This change expands RocksDB's internal usage of metaprogramming and SFINAE (https://en.cppreference.com/w/cpp/language/sfinae).
The existing usages of Cache are divided up at a high level into these new interfaces. See updated existing uses of Cache for examples of how these are used.
* PlaceholderCacheInterface - Used for making cache reservations, with entries that have a charge but no value.
* BasicTypedCacheInterface<TValue> - Used for primary cache storage of objects of type TValue, which can be cleaned up with std::default_delete<TValue>. The role is provided by TValue::kCacheEntryRole or given in an optional template parameter.
* FullTypedCacheInterface<TValue, TCreateContext> - Used for secondary cache compatible storage of objects of type TValue. In addition to BasicTypedCacheInterface constraints, we require TValue::ContentSlice() to return persistable data. This simplifies usage for the normal case of simple secondary cache compatibility (can give you a Slice to the data already in memory). In addition to TCreateContext performing the role of Cache::CreateContext, it is also expected to provide a factory function for creating TValue.
* For each of these, there's a "Shared" version (e.g. FullTypedSharedCacheInterface) that holds a shared_ptr to the Cache, rather than assuming external ownership by holding only a raw `Cache*`.
These interfaces introduce specific handle types for each interface instantiation, so that it's easy to see what kind of object is controlled by a handle. (Ultimately, this might not be worth the extra complexity, but it seems OK so far.)
Note: I attempted to make the cache 'charge' automatically inferred from the cache object type, such as by expecting an ApproximateMemoryUsage() function, but this is not so clean because there are cases where we need to compute the charge ahead of time and don't want to re-compute it.
## block_cache.h
This header is essentially the replacement for the old block_like_traits.h. It includes various things to support block cache access with typed_cache.h for block-based table.
## block_based_table_reader.cc
Before this change, accessing the block cache here was an awkward mix of static polymorphism (template TBlocklike) and switch-case on a dynamic BlockType value. This change mostly unifies on static polymorphism, relying on minor hacks in block_cache.h to distinguish variants of Block. We still check BlockType in some places (especially for stats, which could be improved in follow-up work) but at least the BlockType is a static constant from the template parameter. (No more awkward partial redundancy between static and dynamic info.) This likely contributes to the overall performance improvement, but hasn't been tested in isolation.
The other key source of simplification here is a more unified system of creating block cache objects: for directly populating from primary cache and for promotion from secondary cache. Both use BlockCreateContext, for context and for factory functions.
## block_based_table_builder.cc, cache_dump_load_impl.cc
Before this change, warming caches was super ugly code. Both of these source files had switch statements to basically transition from the dynamic BlockType world to the static TBlocklike world. None of that mess is needed anymore as there's a new, untyped WarmInCache function that handles all the details just as promotion from SecondaryCache would. (Fixes `TODO akanksha: Dedup below code` in block_based_table_builder.cc.)
## Everything else
Mostly just updating Cache users to use new typed APIs when reasonably possible, or changed Cache APIs when not.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10975
Test Plan:
tests updated
Performance test setup similar to https://github.com/facebook/rocksdb/issues/10626 (by cache size, LRUCache when not "hyper" for HyperClockCache):
34MB 1thread base.hyper -> kops/s: 0.745 io_bytes/op: 2.52504e+06 miss_ratio: 0.140906 max_rss_mb: 76.4844
34MB 1thread new.hyper -> kops/s: 0.751 io_bytes/op: 2.5123e+06 miss_ratio: 0.140161 max_rss_mb: 79.3594
34MB 1thread base -> kops/s: 0.254 io_bytes/op: 1.36073e+07 miss_ratio: 0.918818 max_rss_mb: 45.9297
34MB 1thread new -> kops/s: 0.252 io_bytes/op: 1.36157e+07 miss_ratio: 0.918999 max_rss_mb: 44.1523
34MB 32thread base.hyper -> kops/s: 7.272 io_bytes/op: 2.88323e+06 miss_ratio: 0.162532 max_rss_mb: 516.602
34MB 32thread new.hyper -> kops/s: 7.214 io_bytes/op: 2.99046e+06 miss_ratio: 0.168818 max_rss_mb: 518.293
34MB 32thread base -> kops/s: 3.528 io_bytes/op: 1.35722e+07 miss_ratio: 0.914691 max_rss_mb: 264.926
34MB 32thread new -> kops/s: 3.604 io_bytes/op: 1.35744e+07 miss_ratio: 0.915054 max_rss_mb: 264.488
233MB 1thread base.hyper -> kops/s: 53.909 io_bytes/op: 2552.35 miss_ratio: 0.0440566 max_rss_mb: 241.984
233MB 1thread new.hyper -> kops/s: 62.792 io_bytes/op: 2549.79 miss_ratio: 0.044043 max_rss_mb: 241.922
233MB 1thread base -> kops/s: 1.197 io_bytes/op: 2.75173e+06 miss_ratio: 0.103093 max_rss_mb: 241.559
233MB 1thread new -> kops/s: 1.199 io_bytes/op: 2.73723e+06 miss_ratio: 0.10305 max_rss_mb: 240.93
233MB 32thread base.hyper -> kops/s: 1298.69 io_bytes/op: 2539.12 miss_ratio: 0.0440307 max_rss_mb: 371.418
233MB 32thread new.hyper -> kops/s: 1421.35 io_bytes/op: 2538.75 miss_ratio: 0.0440307 max_rss_mb: 347.273
233MB 32thread base -> kops/s: 9.693 io_bytes/op: 2.77304e+06 miss_ratio: 0.103745 max_rss_mb: 569.691
233MB 32thread new -> kops/s: 9.75 io_bytes/op: 2.77559e+06 miss_ratio: 0.103798 max_rss_mb: 552.82
1597MB 1thread base.hyper -> kops/s: 58.607 io_bytes/op: 1449.14 miss_ratio: 0.0249324 max_rss_mb: 1583.55
1597MB 1thread new.hyper -> kops/s: 69.6 io_bytes/op: 1434.89 miss_ratio: 0.0247167 max_rss_mb: 1584.02
1597MB 1thread base -> kops/s: 60.478 io_bytes/op: 1421.28 miss_ratio: 0.024452 max_rss_mb: 1589.45
1597MB 1thread new -> kops/s: 63.973 io_bytes/op: 1416.07 miss_ratio: 0.0243766 max_rss_mb: 1589.24
1597MB 32thread base.hyper -> kops/s: 1436.2 io_bytes/op: 1357.93 miss_ratio: 0.0235353 max_rss_mb: 1692.92
1597MB 32thread new.hyper -> kops/s: 1605.03 io_bytes/op: 1358.04 miss_ratio: 0.023538 max_rss_mb: 1702.78
1597MB 32thread base -> kops/s: 280.059 io_bytes/op: 1350.34 miss_ratio: 0.023289 max_rss_mb: 1675.36
1597MB 32thread new -> kops/s: 283.125 io_bytes/op: 1351.05 miss_ratio: 0.0232797 max_rss_mb: 1703.83
Almost uniformly improving over base revision, especially for hot paths with HyperClockCache, up to 12% higher throughput seen (1597MB, 32thread, hyper). The improvement for that is likely coming from much simplified code for providing context for secondary cache promotion (CreateCallback/CreateContext), and possibly from less branching in block_based_table_reader. And likely a small improvement from not reconstituting key for DeleterFn.
Reviewed By: anand1976
Differential Revision: D42417818
Pulled By: pdillinger
fbshipit-source-id: f86bfdd584dce27c028b151ba56818ad14f7a432
Summary:
Reading uncompression dict block always uses sync reads, while data blocks may use async reads and prefetching. This causes problems in FilePrefetchBuffer. So avoid mixing the two by reading the uncompression dict straight from the file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11050
Test Plan: Crash test
Reviewed By: akankshamahajan15
Differential Revision: D42194682
Pulled By: anand1976
fbshipit-source-id: aaa8b396fdfe966b157e210f5ef8501c45b7b69e
Summary:
Previously, you could get a format_version error if SST file size was too small in manifest, or a weird "too short" error if too big in manifest. Now we ensure:
* Magic number error is reported first if we attempt to open an SST file and the footer is completely bad.
* Footer errors are reported with affected file.
* If manifest file size doesn't match actual, then the error includes expected and actual sizes (if an error is reported; in some cases we allow the file to be too big)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11009
Test Plan:
unit tests added, some manual
Previously, the code for "file too short" in footer processing was only covered by some tests attempting to verify SST checksums on non-SST files (fixed).
Reviewed By: siying
Differential Revision: D41656272
Pulled By: pdillinger
fbshipit-source-id: 3da32702eb5aaedbea0e5e74742ad57edd7ad3df
Summary:
Compressed block cache depends on reading the block compression marker beyond the payload block size. Only the payload bytes were being saved and loaded from SecondaryCache -> boom!
This removes some unnecessary code attempting to combine these two competing features. Note that BlockContents was previously used for block-based filter in block cache, but that support has been removed.
Also marking block_cache_compressed as deprecated in this commit as we expect it to be replaced with SecondaryCache.
This problem was discovered during refactoring but didn't want to combine bug fix with that refactoring.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10944
Test Plan: test added that fails on base revision (at least with ASAN)
Reviewed By: akankshamahajan15
Differential Revision: D41205578
Pulled By: pdillinger
fbshipit-source-id: 1b29d36c7a6552355ac6511fcdc67038ef4af29f
Summary:
Currently, a memtable's stats `num_deletes_` is incremented only if the entry is a regular delete (kTypeDeletion). We need to fix it by accounting for kTypeSingleDeletion and kTypeDeletionWithTimestamp.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10886
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D40740754
Pulled By: riversand963
fbshipit-source-id: 7bde62cd6df136585bc5bfb1c426c7a8276c08e1
Summary:
Add some extra information in outputs of "sst_dump --command=raw" to help debug some issues. Right now, encoded block handle is printed out. It is more useful to directly print out offset and size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10873
Test Plan: Manually run it against a file and check the output.
Reviewed By: anand1976
Differential Revision: D40742289
fbshipit-source-id: 04d7de26e7f27e1595a7cc3ac1c1082e4e835b93
Summary:
FragmentedRangeTombstoneList has a member variable `seq_set_` that contains the sequence numbers of all range tombstones in a set. The set is constructed in `FragmentTombstones()` and is used only in `FragmentedRangeTombstoneList::ContainsRange()` which only happens during compaction. This PR moves the initialization of `seq_set_` to `FragmentedRangeTombstoneList::ContainsRange()`. This should speed up `FragmentTombstones()` when the range tombstone list is used for read/scan requests. Microbench shows the speed improvement to be ~45%.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10848
Test Plan:
- Existing tests and stress test: `python3 tools/db_crashtest.py whitebox --simple --verify_iterator_with_expected_state_one_in=5`.
- Microbench: update `range_del_aggregator_bench` to benchmark speed of `FragmentTombstones()`:
```
./range_del_aggregator_bench --num_range_tombstones=1000 --tombstone_start_upper_bound=50000000 --num_runs=10000 --tombstone_width_mean=200 --should_deletes_per_run=100 --use_compaction_range_del_aggregator=true
Before this PR:
=========================
Fragment Tombstones: 270.286 us
AddTombstones: 1.28933 us
ShouldDelete (first): 0.525528 us
ShouldDelete (rest): 0.0797519 us
After this PR: time to fragment tombstones is pushed to AddTombstones() which only happen during compaction.
=========================
Fragment Tombstones: 149.879 us
AddTombstones: 102.131 us
ShouldDelete (first): 0.565871 us
ShouldDelete (rest): 0.0729444 us
```
- db_bench: this should improve speed for fragmenting range tombstones for mutable memtable:
```
./db_bench --benchmarks=readwhilewriting --writes_per_range_tombstone=100 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=250000 --disable_auto_compactions --max_num_range_tombstones=100000 --finish_after_writes --write_buffer_size=1073741824 --threads=25
Before this PR:
readwhilewriting : 18.301 micros/op 1310445 ops/sec 4.769 seconds 6250000 operations; 28.1 MB/s (41001 of 250000 found)
After this PR:
readwhilewriting : 16.943 micros/op 1439376 ops/sec 4.342 seconds 6250000 operations; 23.8 MB/s (28977 of 250000 found)
```
Reviewed By: ajkr
Differential Revision: D40646227
Pulled By: cbi42
fbshipit-source-id: ea471667edb258f67d01cfd828588e80a89e4083
Summary:
The motivations for this change include
* Free up space in ClockHandle so that we can add data for secondary cache handling while still keeping within single cache line (64 byte) size.
* This change frees up space by eliminating the need for the `hash` field by making the fixed-size key itself a hash, using a 128-bit bijective (lossless) hash.
* Generally more customizability of ShardedCache (such as hashing) without worrying about virtual call overheads
* ShardedCache now uses static polymorphism (template) instead of dynamic polymorphism (virtual overrides) for the CacheShard. No obvious performance benefit is seen from the change (as mostly expected; most calls to virtual functions in CacheShard could already be optimized to static calls), but offers more flexibility without incurring the runtime cost of adhering to a common interface (without type parameters or static callbacks).
* You'll also notice less `reinterpret_cast`ing and other boilerplate in the Cache implementations, as this can go in ShardedCache.
More detail:
* Don't have LRUCacheShard maintain `std::shared_ptr<SecondaryCache>` copies (extra refcount) when LRUCache can be in charge of keeping a `shared_ptr`.
* Renamed `capacity_mutex_` to `config_mutex_` to better represent the scope of what it guards.
* Some preparation for 64-bit hash and indexing in LRUCache, but didn't include the full change because of slight performance regression.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10801
Test Plan:
Unit test updates were non-trivial because of major changes to the ClockCacheShard interface in handling of key vs. hash.
Performance:
Create with `TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16`
Test with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X1000] -readonly -num=30000000 -bloom_bits=16 -cache_index_and_filter_blocks=1 -cache_size=610000000 -duration 20 -threads=16
```
Before: `readrandom [AVG 150 runs] : 321147 (± 253) ops/sec`
After: `readrandom [AVG 150 runs] : 321530 (± 326) ops/sec`
So possibly ~0.1% improvement.
And with `-cache_type=hyper_clock_cache`:
Before: `readrandom [AVG 30 runs] : 614126 (± 7978) ops/sec`
After: `readrandom [AVG 30 runs] : 645349 (± 8087) ops/sec`
So roughly 5% improvement!
Reviewed By: anand1976
Differential Revision: D40252236
Pulled By: pdillinger
fbshipit-source-id: ff8fc70ef569585edc95bcbaaa0386f61355ae5b
Summary:
Instead of existing calls to ps from gnu_parallel, call a new wrapper that does ps, looks for unit test like processes, and uses pstack or gdb to print thread stack traces. Also, using `ps -wwf` instead of `ps -wf` ensures output is not cut off.
For security, CircleCI runs with security restrictions on ptrace (/proc/sys/kernel/yama/ptrace_scope = 1), and this change adds a work-around to `InstallStackTraceHandler()` (only used by testing tools) to allow any process from the same user to debug it. (I've also touched >100 files to ensure all the unit tests call this function.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10828
Test Plan: local manual + temporary infinite loop in a unit test to observe in CircleCI
Reviewed By: hx235
Differential Revision: D40447634
Pulled By: pdillinger
fbshipit-source-id: 718a4c4a5b54fa0f9af2d01a446162b45e5e84e1
Summary:
Add user-defined timestamp support for range deletion. The new API is `DeleteRange(opt, cf, begin_key, end_key, ts)`. Most of the change is to update the comparator to compare without timestamp. Other than that, major changes are
- internal range tombstone data structures (`FragmentedRangeTombstoneList`, `RangeTombstone`, etc.) to store timestamps.
- Garbage collection of range tombstones and range tombstone covered keys during compaction.
- Get()/MultiGet() to return the timestamp of a range tombstone when needed.
- Get/Iterator with range tombstones bounded by readoptions.timestamp.
- timestamp crash test now issues DeleteRange by default.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10661
Test Plan:
- Added unit test: `make check`
- Stress test: `python3 tools/db_crashtest.py --enable_ts whitebox --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4`
- Ran `db_bench` to measure regression when timestamp is not enabled. The tests are for write (with some range deletion) and iterate with DB fitting in memory: `./db_bench--benchmarks=fillrandom,seekrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=500000 --seek_nexts=10 --disable_auto_compactions -disable_wal=true --max_num_range_tombstones=1000`. Did not see consistent regression in no timestamp case.
| micros/op | fillrandom | seekrandom |
| --- | --- | --- |
|main| 2.58 |10.96|
|PR 10661| 2.68 |10.63|
Reviewed By: riversand963
Differential Revision: D39441192
Pulled By: cbi42
fbshipit-source-id: f05aca3c41605caf110daf0ff405919f300ddec2
Summary:
We have a lot of confusing code because of mixed, sometimes
completely opposite uses of of the term "raw block" or "raw contents",
sometimes within the same source file. For example, in `BlockBasedTableBuilder`,
`raw_block_contents` and `raw_size` generally referred to uncompressed block
contents and size, while `WriteRawBlock` referred to writing a block that
is already compressed if it is going to be. Meanwhile, in
`BlockBasedTable`, `raw_block_contents` either referred to a (maybe
compressed) block with trailer, or a maybe compressed block maybe
without trailer. (Note: left as follow-up work to use C++ typing to
better sort out the various kinds of BlockContents.)
This change primarily tries to apply some consistent terminology around
the kinds of block representations, avoiding the unclear "raw". (Any
meaning of "raw" assumes some bias toward the storage layer or toward
the logical data layer.) Preferred terminology:
* **Serialized block** - bytes that go into storage. For block-based table
(usually the case) this includes the block trailer. WART: block `size` may or
may not include the trailer; need to be clear about whether it does or not.
* **Maybe compressed block** - like a serialized block, but without the
trailer (or no promise of including a trailer). Must be accompanied by a
CompressionType.
* **Uncompressed block** - "payload" bytes that are either stored with no
compression, used as input to compression function, or result of
decompression function.
* **Parsed block** - an in-memory form of a block in block cache, as it is
used by the table reader. Different C++ types are used depending on the
block type (see block_like_traits.h).
Other refactorings:
* Misc corrections/improvements of internal API comments
* Remove a few misleading / unhelpful / redundant comments.
* Use move semantics in some places to simplify contracts
* Use better parameter names to indicate which parameters are used for
outputs
* Remove some extraneous `extern`
* Various clean-ups to `CacheDumperImpl` (mostly unnecessary code)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10408
Test Plan: existing tests
Reviewed By: akankshamahajan15
Differential Revision: D38172617
Pulled By: pdillinger
fbshipit-source-id: ccb99299f324ac5ca46996d34c5089621a4f260c
Summary:
Sanitize initial_auto_readahead_size if its greater than max_auto_readahead_size in case of async_io
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10660
Test Plan: Ran db_stress with intitial_auto_readahead_size greater than max_auto_readahead_size.
Reviewed By: anand1976
Differential Revision: D39408095
Pulled By: akankshamahajan15
fbshipit-source-id: 07f933242f636cfbc7ccf042e0c8b959a8ec5f3a
Summary:
Although we've been tracking SST unique IDs in the DB manifest
unconditionally, checking has been opt-in and with an extra pass at DB::Open
time. This changes the behavior of `verify_sst_unique_id_in_manifest` to
check unique ID against manifest every time an SST file is opened through
table cache (normal DB operations), replacing the explicit pass over files
at DB::Open time. This change also enables the option by default and
removes the "EXPERIMENTAL" designation.
One possible criticism is that the option no longer ensures the integrity
of a DB at Open time. This is far from an all-or-nothing issue. Verifying
the IDs of all SST files hardly ensures all the data in the DB is readable.
(VerifyChecksum is supposed to do that.) Also, with
max_open_files=-1 (default, extremely common), all SST files are
opened at DB::Open time anyway.
Implementation details:
* `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass
that is now removed.
* Unit tests that manipulate/corrupt table properties have to opt out of
this check, because that corrupts the "actual" unique id. (And even for
testing we don't currently have a mechanism to set "no unique id"
in the in-memory file metadata for new files.)
* A lot of other unit test churn relates to (a) default checking on, and
(b) checking on SST open even without DB::Open (e.g. on flush)
* Use `FileMetaData` for more `TableCache` operations (in place of
`FileDescriptor`) so that we have access to the unique_id whenever
we might need to open an SST file. **There is the possibility of
performance impact because we can no longer use the more
localized `fd` part of an `FdWithKeyRange` but instead follow the
`file_metadata` pointer. However, this change (possible regression)
is only done for `GetMemoryUsageByTableReaders`.**
* Removed a completely unnecessary constructor overload of
`TableReaderOptions`
Possible follow-up:
* Verification only happens when opening through table cache. Are there
more places where this should happen?
* Improve error message when there is a file size mismatch vs. manifest
(FIXME added in the appropriate place).
* I'm not sure there's a justification for `FileDescriptor` to be distinct from
`FileMetaData`.
* I'm skeptical that `FdWithKeyRange` really still makes sense for
optimizing some data locality by duplicating some data in memory, but I
could be wrong.
* An unnecessary overload of NewTableReader was recently added, in
the public API nonetheless (though unusable there). It should be cleaned
up to put most things under `TableReaderOptions`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532
Test Plan:
updated unit tests
Performance test showing no significant difference (just noise I think):
`./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000`
Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec
After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec
Reviewed By: jay-zhuang
Differential Revision: D38765551
Pulled By: pdillinger
fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
Summary:
RocksDB does auto-readahead for iterators on noticing more
than two reads for a table file if user doesn't provide readahead_size and reads are sequential.
A new option num_file_reads_for_auto_readahead is added which can be
configured and indicates after how many sequential reads prefetching should
be start.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10556
Test Plan: Existing and new unit test
Reviewed By: anand1976
Differential Revision: D38947147
Pulled By: akankshamahajan15
fbshipit-source-id: c9eeab495f84a8df7f701c42f04894e46440ad97
Summary:
The patch adds a new API `GetEntity` that can be used to perform
wide-column point lookups. It also extends the `Get` code path and
the `MemTable` / `MemTableList` and `Version` / `GetContext` logic
accordingly so that wide-column entities can be served from both
memtables and SSTs. If the result of a lookup is a wide-column entity
(`kTypeWideColumnEntity`), it is passed to the application in deserialized
form; if it is a plain old key-value (`kTypeValue`), it is presented as a
wide-column entity with a single default (anonymous) column.
(In contrast, regular `Get` returns plain old key-values as-is, and
returns the value of the default column for wide-column entities, see
https://github.com/facebook/rocksdb/issues/10483 .)
The result of `GetEntity` is a self-contained `PinnableWideColumns` object.
`PinnableWideColumns` contains a `PinnableSlice`, which either stores the
underlying data in its own buffer or holds on to a cache handle. It also contains
a `WideColumns` instance, which indexes the contents of the `PinnableSlice`,
so applications can access the values of columns efficiently.
There are several pieces of functionality which are currently not supported
for wide-column entities: there is currently no `MultiGetEntity` or wide-column
iterator; also, `Merge` and `GetMergeOperands` are not supported, and there
is no `GetEntity` implementation for read-only and secondary instances.
We plan to implement these in future PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10540
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D38847474
Pulled By: ltamasi
fbshipit-source-id: 42311a34ccdfe88b3775e847a5e2a5296e002b5b
Summary:
This reverts commit 0d885e80d4. The original commit causes a ASAN stack-use-after-return failure due to the `CreateCallback` being allocated on stack and then used in another thread when a secondary cache object is promoted to the primary cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10541
Reviewed By: gitbw95
Differential Revision: D38850039
Pulled By: anand1976
fbshipit-source-id: 810c592b7de2523693f5bb267159b23b0ee9132c
Summary:
RocksDB's `Cache` abstraction currently supports two priority levels for items: high (used for frequently accessed/highly valuable SST metablocks like index/filter blocks) and low (used for SST data blocks). Blobs are typically lower-value targets for caching than data blocks, since 1) with BlobDB, data blocks containing blob references conceptually form an index structure which has to be consulted before we can read the blob value, and 2) cached blobs represent only a single key-value, while cached data blocks generally contain multiple KVs. Since we would like to make it possible to use the same backing cache for the block cache and the blob cache, it would make sense to add a new, lower-than-low cache priority level (bottom level) for blobs so data blocks are prioritized over them.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10461
Reviewed By: siying
Differential Revision: D38672823
Pulled By: ltamasi
fbshipit-source-id: 90cf7362036563d79891f47be2cc24b827482743
Summary:
... so that cache keys can be derived from DB manifest data
before reading the file from storage--so that every part of the file
can potentially go in a persistent cache.
See updated comments in cache_key.cc for technical details. Importantly,
the new cache key encoding uses some fancy but efficient math to pack
data into the cache key without depending on the sizes of the various
pieces. This simplifies some existing code creating cache keys, like
cache warming before the file size is known.
This should provide us an essentially permanent mapping between SST
unique IDs and base cache keys, with the ability to "upgrade" SST
unique IDs (and thus cache keys) with new SST format_versions.
These cache keys are of similar, perhaps indistinguishable quality to
the previous generation. Before this change (see "corrected" days
between collision):
```
./cache_bench -stress_cache_key -sck_keep_bits=43
18 collisions after 2 x 90 days, est 10 days between (1.15292e+19 corrected)
```
After this change (keep 43 bits, up through 50, to validate "trajectory"
is ok on "corrected" days between collision):
```
19 collisions after 3 x 90 days, est 14.2105 days between (1.63836e+19 corrected)
16 collisions after 5 x 90 days, est 28.125 days between (1.6213e+19 corrected)
15 collisions after 7 x 90 days, est 42 days between (1.21057e+19 corrected)
15 collisions after 17 x 90 days, est 102 days between (1.46997e+19 corrected)
15 collisions after 49 x 90 days, est 294 days between (2.11849e+19 corrected)
15 collisions after 62 x 90 days, est 372 days between (1.34027e+19 corrected)
15 collisions after 53 x 90 days, est 318 days between (5.72858e+18 corrected)
15 collisions after 309 x 90 days, est 1854 days between (1.66994e+19 corrected)
```
However, the change does modify (probably weaken) the "guaranteed unique" promise from this
> SST files generated in a single process are guaranteed to have unique cache keys, unless/until number session ids * max file number = 2**86
to this (see https://github.com/facebook/rocksdb/issues/10388)
> With the DB id limitation, we only have nice guaranteed unique cache keys for files generated in a single process until biggest session_id_counter and offset_in_file reach combined 64 bits
I don't think this is a practical concern, though.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10394
Test Plan: unit tests updated, see simulation results above
Reviewed By: jay-zhuang
Differential Revision: D38667529
Pulled By: pdillinger
fbshipit-source-id: 49af3fe7f47e5b61162809a78b76c769fd519fba
Summary:
Some files miss headers. Also some headers are irregular. Fix them to make an internal checkup tool happy.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10519
Reviewed By: jay-zhuang
Differential Revision: D38603291
fbshipit-source-id: 13b1bbd6d48f5ee15ba20da67544396de48238f1
Summary:
A flag in WritableFileWriter is introduced to remember error has happened. Subsequent operations will fail with an assertion. Those operations, except Close() are not supposed to be called anyway. This change will help catch bug in tests and stress tests and limit damage of a potential bug of continue writing to a file after a failure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10489
Test Plan: Fix existing unit tests and watch crash tests for a while.
Reviewed By: anand1976
Differential Revision: D38473277
fbshipit-source-id: 09aafb971e56cfd7f9ef92ad15b883f54acf1366
Summary:
lambda function dynamicly allocates memory from heap if it needs to
capture multiple values, which could be expensive.
Switch to explictly use local functor from stack.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10453
Test Plan:
CI
db_bench shows ~2-3% read improvement:
```
# before the change
TEST_TMPDIR=/tmp/dbbench4 ./db_bench_main --benchmarks=filluniquerandom,readrandom -compression_type=none -max_background_jobs=12 -num=10000000
readrandom : 8.528 micros/op 117265 ops/sec 85.277 seconds 10000000 operations; 13.0 MB/s (10000000 of 10000000 found)
# after the change
TEST_TMPDIR=/tmp/dbbench5 ./db_bench_new --benchmarks=filluniquerandom,readrandom -compression_type=none -max_background_jobs=12 -num=10000000
readrandom : 8.263 micros/op 121015 ops/sec 82.634 seconds 10000000 operations; 13.4 MB/s (10000000 of 10000000 found)
```
details: https://gist.github.com/jay-zhuang/5ac0628db8fc9cbcb499e056d4cb5918
Micro-benchmark shows a similar improvement ~1-2%:
before the change:
https://gist.github.com/jay-zhuang/9dc0ebf51bbfbf4af82f6193d43cf75b
after the change:
https://gist.github.com/jay-zhuang/fc061f1813cd8f441109ad0b0fe7c185
Reviewed By: ajkr
Differential Revision: D38345056
Pulled By: jay-zhuang
fbshipit-source-id: f3597aeeee338a804d37bf2e81386d5a100665e0
Summary:
This PR is the first step in enhancing the coroutines MultiGet to be able to lookup a batch in parallel across levels. By having a separate TableReader function for probing the bloom filters, we can quickly figure out which overlapping keys from a batch are definitely not in the file and can move on to the next level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10432
Reviewed By: akankshamahajan15
Differential Revision: D38245910
Pulled By: anand1976
fbshipit-source-id: 3d20db2350378c3fe6f086f0c7ba5ff01d7f04de
Summary:
If a secondary cache is configured, its possible that a cache lookup will get a hit in the secondary cache. In that case, the ```LRUCacheShard::Lookup``` doesn't immediately update the ```total_charge``` for the item handle if the ```wait``` parameter is false (i.e caller will call later to check the completeness). However, ```BlockBasedTable::GetEntryFromCache``` assumes the handle is complete and calls ```UpdateCacheHitMetrics```, which checks the usage of the cache item and fails the assert in https://github.com/facebook/rocksdb/blob/main/cache/lru_cache.h#L237 (```assert(total_charge >= meta_charge)```).
To fix this, we call ```UpdateCacheHitMetrics``` later in ```MultiGet```, after waiting for all cache lookup completions.
Test plan -
Run crash test with changes from https://github.com/facebook/rocksdb/issues/10160
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10440
Reviewed By: gitbw95
Differential Revision: D38283968
Pulled By: anand1976
fbshipit-source-id: 31c54ef43517726c6e5fdda81899b364241dd7e1
Summary:
RocksDB's `Cache` abstraction currently supports two priority levels for items: high (used for frequently accessed/highly valuable SST metablocks like index/filter blocks) and low (used for SST data blocks). Blobs are typically lower-value targets for caching than data blocks, since 1) with BlobDB, data blocks containing blob references conceptually form an index structure which has to be consulted before we can read the blob value, and 2) cached blobs represent only a single key-value, while cached data blocks generally contain multiple KVs. Since we would like to make it possible to use the same backing cache for the block cache and the blob cache, it would make sense to add a new, lower-than-low cache priority level (bottom level) for blobs so data blocks are prioritized over them.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10309
Reviewed By: ltamasi
Differential Revision: D38211655
Pulled By: gangliao
fbshipit-source-id: 65ef33337db4d85277cc6f9782d67c421ad71dd5
Summary:
Unit tests still haven't been fixed. Also need to add more tests. But I ran some simple fillrandom db_bench and the partitioning feels reasonable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10393
Test Plan:
1. Make sure existing tests pass. This should cover some basic sub compaction logic to be correct and the partitioning result is reasonable;
2. Add a new unit test to ApproximateKeyAnchors()
3. Run some db_bench with max_subcompaction = 4 and watch the compaction is indeed partitioned evenly.
Reviewed By: jay-zhuang
Differential Revision: D38043783
fbshipit-source-id: 085008e0f85f9b7c5abff7800307618320efb19f
Summary:
To help service owners to manage their memory budget effectively, we have been working towards counting all major memory users inside RocksDB towards a single global memory limit (see e.g. https://github.com/facebook/rocksdb/wiki/Write-Buffer-Manager#cost-memory-used-in-memtable-to-block-cache). The global limit is specified by the capacity of the block-based table's block cache, and is technically implemented by inserting dummy entries ("reservations") into the block cache. The goal of this task is to support charging the memory usage of the new blob cache against this global memory limit when the backing cache of the blob cache and the block cache are different.
This PR is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10321
Reviewed By: ltamasi
Differential Revision: D37913590
Pulled By: gangliao
fbshipit-source-id: eaacf23907f82dc7d18964a3f24d7039a2937a72
Summary:
Which will be used for tiered storage to preclude hot data from
compacting to the cold tier (the last level).
Internally, adding seqno to time mapping. A periodic_task is scheduled
to record the current_seqno -> current_time in certain cadence. When
memtable flush, the mapping informaiton is stored in sstable property.
During compaction, the mapping information are merged and get the
approximate time of sequence number, which is used to determine if a key
is recently inserted or not and preclude it from the last level if it's
recently inserted (within the `preclude_last_level_data_seconds`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10338
Test Plan: CI
Reviewed By: siying
Differential Revision: D37810187
Pulled By: jay-zhuang
fbshipit-source-id: 6953be7a18a99de8b1cb3b162d712f79c2b4899f
Summary:
InternalKeyComparator is an internal class which is a simple wrapper of Comparator. https://github.com/facebook/rocksdb/pull/8336 made Comparator customizeable. As a side effect, internal key comparator was made configurable too. This introduces overhead to this simple wrapper. For example, every InternalKeyComparator will have an std::vector attached to it, which consumes memory and possible allocation overhead too.
We remove InternalKeyComparator from being customizable by making InternalKeyComparator not a subclass of Comparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10342
Test Plan: Run existing CI tests and make sure it doesn't fail
Reviewed By: riversand963
Differential Revision: D37771351
fbshipit-source-id: 917256ee04b2796ed82974549c734fb6c4d8ccee
Summary:
InternalKeyComparator is a thin wrapper around user comparator. Storing a string for name is relatively expensive to this small wrapper for both CPU and memory usage. Try to remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10343
Test Plan: Run existing tests
Reviewed By: ajkr
Differential Revision: D37772469
fbshipit-source-id: d2d106a8d022193058fd7f6b220108e3d94aca34
Summary:
I noticed it would clean up some things to have Cache::Insert()
return our MemoryLimit Status instead of Incomplete for the case in
which the capacity limit is reached. I suspect this fixes some existing but
unknown bugs where this Incomplete could be confused with other uses
of Incomplete, especially no_io cases. This is the most suspicious case I
noticed, but was not able to reproduce a bug, in part because the existing
code is not covered by unit tests (FIXME added): 57adbf0e91/table/get_context.cc (L397)
I audited all the existing uses of IsIncomplete and updated those that
seemed relevant.
HISTORY updated with a clear warning to users of strict_capacity_limit=true
to update uses of `IsIncomplete()`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10262
Test Plan: updated unit tests
Reviewed By: hx235
Differential Revision: D37473155
Pulled By: pdillinger
fbshipit-source-id: 4bd9d9353ccddfe286b03ebd0652df8ce20f99cb
Summary:
…ta blocks
During MyShadow testing, ajkr helped me find out that with partitioned index and dictionary compression enabled, `PartitionedIndexIterator::InitPartitionedIndexBlock()` spent considerable amount of time (1-2% CPU) on fetching uncompression dictionary. Fetching uncompression dict was not needed since the index blocks were not compressed (and even if they were, they use empty dictionary). This should only affect use cases with partitioned index, dictionary compression and without uncompression dictionary pinned. This PR updates NewDataBlockIterator to not fetch uncompression dictionary when it is not for data blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10310
Test Plan:
1. `make check`
2. Perf benchmark: 1.5% (143950 -> 146176) improvement in op/sec for partitioned index + dict compression benchmark.
For default config without partitioned index and without dict compression, there is no regression in readrandom perf from multiple runs of db_bench.
```
# Set up for partitioned index with dictionary compression
TEST_TMPDIR=/dev/shm ./db_bench_main -benchmarks=filluniquerandom,compact -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -partition_index=true -compression_max_dict_bytes=16384 -compression_zstd_max_train_bytes=1638400
# Pre PR
TEST_TMPDIR=/dev/shm ./db_bench_main -use_existing_db=true -benchmarks=readrandom[-X50] -partition_index=true
readrandom [AVG 50 runs] : 143950 (± 1108) ops/sec; 15.9 (± 0.1) MB/sec
readrandom [MEDIAN 50 runs] : 144406 ops/sec; 16.0 MB/sec
# Post PR
TEST_TMPDIR=/dev/shm ./db_bench_opt -use_existing_db=true -benchmarks=readrandom[-X50] -partition_index=true
readrandom [AVG 50 runs] : 146176 (± 1121) ops/sec; 16.2 (± 0.1) MB/sec
readrandom [MEDIAN 50 runs] : 146014 ops/sec; 16.2 MB/sec
# Set up for no partitioned index and no dictionary compression
TEST_TMPDIR=/dev/shm/baseline ./db_bench_main -benchmarks=filluniquerandom,compact -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false
# Pre PR
TEST_TMPDIR=/dev/shm/baseline/ ./db_bench_main --use_existing_db=true "--benchmarks=readrandom[-X50]"
readrandom [AVG 50 runs] : 158546 (± 1000) ops/sec; 17.5 (± 0.1) MB/sec
readrandom [MEDIAN 50 runs] : 158280 ops/sec; 17.5 MB/sec
# Post PR
TEST_TMPDIR=/dev/shm/baseline/ ./db_bench_opt --use_existing_db=true "--benchmarks=readrandom[-X50]"
readrandom [AVG 50 runs] : 161061 (± 1520) ops/sec; 17.8 (± 0.2) MB/sec
readrandom [MEDIAN 50 runs] : 161596 ops/sec; 17.9 MB/sec
```
Reviewed By: ajkr
Differential Revision: D37631358
Pulled By: cbi42
fbshipit-source-id: 6ca2665e270e63871968e061ba4a99d3136785d9
Summary:
The patch builds on https://github.com/facebook/rocksdb/pull/9915 and adds
a new API called `PutEntity` that can be used to write a wide-column entity
to the database. The new API is added to both `DB` and `WriteBatch`. Note
that currently there is no way to retrieve these entities; more precisely, all
read APIs (`Get`, `MultiGet`, and iterator) return `NotSupported` when they
encounter a wide-column entity that is required to answer a query. Read-side
support (as well as other missing functionality like `Merge`, compaction filter,
and timestamp support) will be added in later PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10242
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D37369748
Pulled By: ltamasi
fbshipit-source-id: 7f5e412359ed7a400fd80b897dae5599dbcd685d
Summary:
With https://github.com/facebook/rocksdb/pull/9996 , we can pass the rate_limiter_priority to FS for most cases. This PR is to update the code path for filter block reader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10251
Test Plan: Current unit tests should pass.
Reviewed By: pdillinger
Differential Revision: D37427667
Pulled By: gitbw95
fbshipit-source-id: 1ce5b759b136efe4cfa48a6b97e2f837ff087433
Summary:
There was a bug in the MultiGet enhancement in https://github.com/facebook/rocksdb/issues/9899 with data
block hash index, which was not caught because data block hash index was
never added to stress tests. This change fixes both issues.
Fixes https://github.com/facebook/rocksdb/issues/10186
I intend to pick this into the 7.4.0 release candidate
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10220
Test Plan:
Failure quickly reproduces in crash test with
kDataBlockBinaryAndHash, and does not seem to with the fix. Reproducing
the failure with a unit test I believe would be too tricky and fragile
to be worthwhile.
Reviewed By: anand1976
Differential Revision: D37315647
Pulled By: pdillinger
fbshipit-source-id: 9f648265bba867275edc752f7a56611a59401cba
Summary:
There was an interesting code path not covered by testing that
is difficult to replicate in a unit test, which is now covered using a
sync point. Specifically, the case of table_prefix_extractor == null and
!need_upper_bound_check in `BlockBasedTable::PrefixMayMatch`, which
can happen if table reader is open before extractor is registered with global
object registry, but is later registered and re-set with SetOptions. (We
don't have sufficient testing control over object registry to set that up
repeatedly.)
Also, this function has been renamed to `PrefixRangeMayMatch` for clarity
vs. other functions that are not the same.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10122
Test Plan: unit tests expanded
Reviewed By: siying
Differential Revision: D36944834
Pulled By: pdillinger
fbshipit-source-id: 9e52d9da1929a3e42bbc230fcdc3599949de7bdb
mrambacher
