Summary:
Although the tags for `WalAddition`, `WalDeletion` are after `kTagSafeIgnoreMask`, to actually be able to skip these entries in older versions of RocksDB, we require that they are encoded with their encoded size as the prefix. This requirement is not met in the current codebase, so a downgraded DB may fail to open if these entries exist in the MANIFEST.
If a DB wants to downgrade, and its MANIFEST contains `WalAddition` or `WalDeletion`, it can set `track_and_verify_wals_in_manifest` to `false`, then restart twice, then downgrade. On the first restart, a new MANIFEST will be created with a `WalDeletion` indicating that all previously tracked WALs are removed from MANIFEST. On the second restart, since there is no tracked WALs in MANIFEST now, a new MANIFEST will be created with neither `WalAddition` nor `WalDeletion`. Then the DB can downgrade.
Tags for `BlobFileAddition`, `BlobFileGarbage` also have the same problem, but this PR focuses on solving the problem for WAL edits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7873
Test Plan: Added a `VersionEditTest::IgnorableTags` unit test to verify all entries with tags larger than `kTagSafeIgnoreMask` can actually be skipped and won't affect parsing of other entries.
Reviewed By: ajkr
Differential Revision: D25935930
Pulled By: cheng-chang
fbshipit-source-id: 7a02fdba4311d6084328c14aed110a26d08c3efb
Summary:
Following https://github.com/facebook/rocksdb/issues/7655 and https://github.com/facebook/rocksdb/issues/7657, this PR adds `full_history_ts_low_` to `ColumnFamilyData`.
`ColumnFamilyData::full_history_ts_low_` will be used to create `FlushJob` and `CompactionJob`.
`ColumnFamilyData::full_history_ts_low` is persisted to the MANIFEST file. An application can only
increase its value. Consider the following case:
>
> The database has a key at ts=950. `full_history_ts_low` is first set to 1000, and then a GC is triggered
> and cleans up all data older than 1000. If the application sets `full_history_ts_low` to 900 afterwards,
> and tries to read at ts=960, the key at 950 is not seen. From the perspective of the read, the result
> is hard to reason. For simplicity, we just do now allow decreasing full_history_ts_low for now.
>
During recovery, the value of `full_history_ts_low` is restored for each column family if applicable. Note that
version edits in the MANIFEST file for the same column family may have `full_history_ts_low` unsorted due
to the potential interleaving of `LogAndApply` calls. Only the max will be used to restore the state of the
column family.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7740
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D25296217
Pulled By: riversand963
fbshipit-source-id: 24acda1df8262cd7cfdc6ce7b0ec56438abe242a
Summary:
When a WAL is synced, an edit is written to MANIFEST.
After flushing memtables, the obsoleted WALs are piggybacked to MANIFEST while writing the new L0 files to MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7601
Test Plan:
`track_and_verify_wals_in_manifest` is enabled by default for all tests extending `DBBasicTest`, and in db_stress_test.
Unit test `wal_edit_test`, `version_edit_test`, and `version_set_test` are also updated.
Watch all tests to pass.
Reviewed By: ltamasi
Differential Revision: D24553957
Pulled By: cheng-chang
fbshipit-source-id: 66a569ff1bdced38e22900bd240b73113906e040
Summary:
This PR makes it able to `LogAndApply` `VersionEdit`s related to WALs, and also be able to `Recover` from MANIFEST with WAL related `VersionEdit`s.
The `VersionEdit`s related to WAL are treated similarly as those related to column family operations, they are not applied to versions, but can be in a commit group. Mixing WAL related `VersionEdit`s with other types of edits will make logic in `ProcessManifestWrite` more complicated, so `VersionEdit`s related to WAL can either be WAL additions or deletions, like column family add and drop.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7256
Test Plan: a set of unit tests are added in `version_set_test.cc`
Reviewed By: riversand963
Differential Revision: D23123238
Pulled By: cheng-chang
fbshipit-source-id: 246be2ed4744fd03fa2738aba408aaa611d0379c
Summary:
There are some tricky behaviors related to WAL sync:
- When creating a WAL, the WAL might not be synced, if the WAL directory is not synced, the WAL file's metadata may not even be synced to disk, so during recovery, when listing the WAL directory, the WAL may not even show up.
- During each DB::Write, the WriteOption can control whether the WAL should be synced, so a WAL previously not synced on creation can be synced during Write.
For each `SyncWAL`, we'll track the synced status and the current WAL size. Previously, we only track the WAL size on closing.
During recovery, we check that the on-disk WAL size is >= the last synced size.
So this PR introduces `synced_size` and `closed` to `WalMetadata` for the above design update.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7414
Test Plan:
- updated wal_edit_test
- updated version_edit_test
Reviewed By: riversand963
Differential Revision: D23796127
Pulled By: cheng-chang
fbshipit-source-id: 5498ab80f537c48a10157e71a4745716aef5cf30
Summary:
`WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`.
`WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size).
`WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery).
`WalSet` is the set of alive WALs kept in `VersionSet`.
1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs
On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber.
But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk.
We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST.
In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs.
2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo`
`VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`.
But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s.
Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references.
So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164
Test Plan:
make version_edit_test && ./version_edit_test
make wal_edit_test && ./wal_edit_test
Reviewed By: ltamasi
Differential Revision: D22677936
Pulled By: cheng-chang
fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
Summary:
Each time RocksDB switches to a new MANIFEST file from old one, it calls WriteCurrentStateToManifest() which writes a 'snapshot' of the current in-memory state of versions to the beginning of the new manifest as a bunch of version edits. We can distinguish these version edits from other version edits written during normal operations with a custom, safe-to-ignore tag.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6530
Test Plan: added test to version_edit_test, pass make asan_check
Reviewed By: riversand963
Differential Revision: D20524516
Pulled By: zhichao-cao
fbshipit-source-id: f1de102f5499bfa88dae3caa2f32c7f42cf904db
Summary:
It's never too soon to refactor something. The patch splits the recently
introduced (`VersionEdit` related) `BlobFileState` into two classes
`BlobFileAddition` and `BlobFileGarbage`. The idea is that once blob files
are closed, they are immutable, and the only thing that changes is the
amount of garbage in them. In the new design, `BlobFileAddition` contains
the immutable attributes (currently, the count and total size of all blobs, checksum
method, and checksum value), while `BlobFileGarbage` contains the mutable
GC-related information elements (count and total size of garbage blobs). This is a
better fit for the GC logic and is more consistent with how SST files are handled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6502
Test Plan: `make check`
Differential Revision: D20348352
Pulled By: ltamasi
fbshipit-source-id: ff93f0121e80ab15e0e0a6525ba0d6af16a0e008
Summary:
BlobDB currently does not keep track of blob files: no records are written to
the manifest when a blob file is added or removed, and upon opening a database,
the list of blob files is populated simply based on the contents of the blob directory.
This means that lost blob files cannot be detected at the moment. We plan to solve
this issue by making blob files a part of `Version`; as a first step, this patch makes
it possible to store information about blob files in `VersionEdit`. Currently, this information
includes blob file number, total number and size of all blobs, and total number and size
of garbage blobs. However, the format is extensible: new fields can be added in
both a forward compatible and a forward incompatible manner if needed (similarly
to `kNewFile4`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6416
Test Plan: `make check`
Differential Revision: D19894234
Pulled By: ltamasi
fbshipit-source-id: f9753e1f2aedf6dadb70c09b345207cb9c58c329
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
In the current code base, RocksDB generate the checksum for each block and verify the checksum at usage. Current PR enable SST file checksum. After a SST file is generated by Flush or Compaction, RocksDB generate the SST file checksum and store the checksum value and checksum method name in the vs_info and MANIFEST as part for the FileMetadata.
Added the enable_sst_file_checksum to Options to enable or disable file checksum. Added sst_file_checksum to Options such that user can plugin their own SST file checksum calculate method via overriding the SstFileChecksum class. The checksum information inlcuding uint32_t checksum value and a checksum name (string). A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST. If user enables the file checksum but does not provide the sst_file_checksum instance, RocksDB will use the default crc32checksum implemented in table/sst_file_checksum_crc32c.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6216
Test Plan: Added the testing case in table_test and ldb_cmd_test to verify checksum is correct in different level. Pass make asan_check.
Differential Revision: D19171461
Pulled By: zhichao-cao
fbshipit-source-id: b2e53479eefc5bb0437189eaa1941670e5ba8b87
Summary:
This is a bunch of small improvements to `VersionEdit`. Namely, the patch
* Makes the names and order of variables, methods, and code chunks related
to the various information elements more consistent, and adds missing
getters for the sake of completeness.
* Initializes previously uninitialized stack variables.
* Marks all getters const to improve const correctness.
* Adds in-class initializers and removes the default ctor that would
create an object with uninitialized built-in fields and call `Clear`
afterwards.
* Adds a new type alias for new files and changes the existing `typedef`
for deleted files into a type alias as well.
* Makes the helper method `DecodeNewFile4From` private.
* Switches from long-winded iterator syntax to range based loops in a
couple of places.
* Fixes a couple of assignments where an integer 0 was assigned to
boolean members.
* Fixes a getter which used to return a `const std::string` instead of
the intended `const std::string&`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6383
Test Plan: make check
Differential Revision: D19780537
Pulled By: ltamasi
fbshipit-source-id: b0b4f09fee0ec0e7c7b7a6d76bfe5346e91824d0
Summary:
options.periodic_compaction_seconds isn't supported when options.max_open_files != -1. It's because that the information of file creation time is stored in table properties and are not guaranteed to be loaded unless options.max_open_files = -1. Relax this constraint by storing the information in manifest.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6090
Test Plan: Pass all existing tests; Modify an existing test to force the manifest value to take 0 to simulate backward compatibility case; manually open the DB generated with the change by release 4.2.
Differential Revision: D18702268
fbshipit-source-id: 13e0bd94f546498a04f3dc5fc0d9dff5125ec9eb
Summary:
Previously, options.ttl cannot be set with options.max_open_files = -1, because it makes use of creation_time field in table properties, which is not available unless max_open_files = -1. With this commit, the information will be stored in manifest and when it is available, will be used instead.
Note that, this change will break forward compatibility for release 5.1 and older.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6060
Test Plan: Extend existing test case to options.max_open_files != -1, and simulate backward compatility in one test case by forcing the value to be 0.
Differential Revision: D18631623
fbshipit-source-id: 30c232a8672de5432ce9608bb2488ecc19138830
Summary:
This is groundwork for adding garbage collection support to BlobDB. The
patch adds logic that keeps track of the oldest blob file referred to by
each SST file. The oldest blob file is identified during flush/
compaction (similarly to how the range of keys covered by the SST is
identified), and persisted in the manifest as a custom field of the new
file edit record. Blob indexes with TTL are ignored for the purposes of
identifying the oldest blob file (since such blob files are cleaned up by the
TTL logic in BlobDB).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5903
Test Plan:
Added new unit tests; also ran db_bench in BlobDB mode, inspected the
manifest using ldb, and confirmed (by scanning the SST files using
sst_dump) that the value of the oldest blob file number field matches
the contents of the file for each SST.
Differential Revision: D17859997
Pulled By: ltamasi
fbshipit-source-id: 21662c137c6259a6af70446faaf3a9912c550e90
Summary:
Each DB has a globally unique ID. A DB can be physically copied around, or backed-up and restored, and the users should be identify the same DB. This unique ID right now is stored as plain text in file IDENTITY under the DB directory. This approach introduces at least two problems: (1) the file is not checksumed; (2) the source of truth of a DB is the manifest file, which can be copied separately from IDENTITY file, causing the DB ID to be wrong.
The goal of this PR is solve this problem by moving the DB ID to manifest. To begin with we will write to both identity file and manifest. Write to Manifest is controlled via the flag write_dbid_to_manifest in Options and default is false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5725
Test Plan: Added unit tests.
Differential Revision: D16963840
Pulled By: vjnadimpalli
fbshipit-source-id: 8a86a4c8c82c716003c40fd6b9d2d758030d92e9
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
During recovery, RocksDB is able to handle version edits that belong to group commits.
This PR is a subset of [PR 3752](https://github.com/facebook/rocksdb/pull/3752)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3945
Differential Revision: D8529122
Pulled By: riversand963
fbshipit-source-id: 57cb0f9cc55ecca684a837742d6626dc9c07f37e
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
Summary:
This reverts commit 73f21a7b21.
It breaks compatibility. When created a DB using a build with this new change, opening the DB and reading the data will fail with this error:
"Corruption: Can't access /000000.sst: IO error: while stat a file for size: /tmp/xxxx/000000.sst: No such file or directory"
This is because the dummy AddFile4 entry generated by the new code will be treated as a real entry by an older build. The older build will think there is a real file with number 0, but there isn't such a file.
Closes https://github.com/facebook/rocksdb/pull/3762
Differential Revision: D7730035
Pulled By: siying
fbshipit-source-id: f2051859eff20ef1837575ecb1e1bb96b3751e77
Summary:
This patch record the deleted WAL numbers in the manifest to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Closes https://github.com/facebook/rocksdb/pull/3488
Differential Revision: D6967893
Pulled By: maysamyabandeh
fbshipit-source-id: 13119feb155a08ab6d4909f437c7a750480dc8a1
Summary: With this commit, we add a new format in manifest when adding a new file. Now path ID and need-compaction hint are first two customized fields.
Test Plan: Add a test case in version_edit_test to verify the encoding and decoding logic. Add a unit test in db_test to verify need compaction is persistent after DB restarting.
Reviewers: kradhakrishnan, anthony, IslamAbdelRahman, yhchiang, rven, igor
Reviewed By: igor
Subscribers: javigon, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48123
Summary:
It is experimental. Allow users to return from a call back function TablePropertiesCollector::NeedCompact(), based on the data in the file.
It can be used to allow users to suggest DB to clear up delete tombstones faster.
Test Plan: Add a unit test.
Reviewers: igor, yhchiang, kradhakrishnan, rven
Reviewed By: rven
Subscribers: yoshinorim, MarkCallaghan, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39585
Summary:
Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different.
In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest.
There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides.
```lang=bash
% cat ~/transform
#!/bin/sh
files=$(git ls-files '*test\.cc')
for file in $files
do
if grep -q "rocksdb::test::RunAllTests()" $file
then
if grep -Eq '^class \w+Test {' $file
then
perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file
perl -pi -e 's/^(TEST)/${1}_F/g' $file
fi
perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file
perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file
fi
done
% sh ~/transform
% make format
```
Second iteration of this diff contains only scripted changes.
Third iteration contains manual changes to fix last errors and make it compilable.
Test Plan:
Build and notice no errors.
```lang=bash
% USE_CLANG=1 make check -j55
```
Tests are still testing.
Reviewers: meyering, sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35157
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
Summary:
This diff has two fixes.
1. Fix the bug where compaction does not fail when RocksDB can't create a new file.
2. When NewWritableFiles() fails in OpenCompactionOutputFiles(), previously such fail-to-created file will be still be included as a compaction output. This patch also fixes this bug.
3. Allow VersionEdit::EncodeTo() to return Status and add basic check.
Test Plan:
./version_edit_test
export ROCKSDB_TESTS=FileCreationRandomFailure
./db_test
Reviewers: ljin, sdong, nkg-, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D25581
Summary:
In this patch, we allow RocksDB to support multiple DB paths internally.
No user interface is supported yet so this patch is silent to users.
Test Plan: make all check
Reviewers: igor, haobo, ljin, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18921
Summary:
Column family IDs should be unique, even if column family is dropped. To achieve this, we save max column family in manifest.
Note that the diff is still not ready. I'm only using differential to move the patch to my Mac machine.
Test Plan: added a test to column_family_test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16581
Summary: The only thing we do with compaction pointers is set them to some values, we never actually read them. I don't know what we used them for, but it doesn't look like we use them anymore.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15225
Summary:
I will submit a sequence of diffs that are preparing master branch for column families. There are a lot of implicit assumptions in the code that are making column family implementation hard. If I make the change only in column family branch, it will make merging back to master impossible.
Most of the diffs will be simple code refactorings, so I hope we can have fast turnaround time. Feel free to grab me in person to discuss any of them.
This diff removes number of level check from VersionEdit. It is used only when VersionEdit is read, not written, but has to be set when it is written. I believe it is a right thing to make VersionEdit dumb and check consistency on the caller side. This will also make it much easier to implement Column Families, since different column families can have different number of levels.
Test Plan: make check
Reviewers: dhruba, haobo, sdong, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15159
Summary:
<This diff is for Column Family branch>
Added fields in manifest file to support adding and deleting column families.
Pretty simple change, each version edit record can be:
1. add column family
2. drop column family
3. add and delete N files from a single column family (compactions and flushes will generate such records)
Test Plan: make check works, the code is backward compatible
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14733
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.
Test Plan: compile rocksdb
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13287
Summary:
There is a new option called hybrid_mode which, when switched on,
causes HBase style compactions. Files from L0 are
compacted back into L0. This meat of this compaction algorithm
is in PickCompactionHybrid().
All files reside in L0. That means all files have overlapping
keys. Each file has a time-bound, i.e. each file contains a
range of keys that were inserted around the same time. The
start-seqno and the end-seqno refers to the timeframe when
these keys were inserted. Files that have contiguous seqno
are compacted together into a larger file. All files are
ordered from most recent to the oldest.
The current compaction algorithm starts to look for
candidate files starting from the most recent file. It continues to
add more files to the same compaction run as long as the
sum of the files chosen till now is smaller than the next
candidate file size. This logic needs to be debated
and validated.
The above logic should reduce write amplification to a
large extent... will publish numbers shortly.
Test Plan: dbstress runs for 6 hours with no data corruption (tested so far).
Differential Revision: https://reviews.facebook.net/D11289
Summary:
There is a new option called hybrid_mode which, when switched on,
causes HBase style compactions. Files from L0 are
compacted back into L0. This meat of this compaction algorithm
is in PickCompactionHybrid().
All files reside in L0. That means all files have overlapping
keys. Each file has a time-bound, i.e. each file contains a
range of keys that were inserted around the same time. The
start-seqno and the end-seqno refers to the timeframe when
these keys were inserted. Files that have contiguous seqno
are compacted together into a larger file. All files are
ordered from most recent to the oldest.
The current compaction algorithm starts to look for
candidate files starting from the most recent file. It continues to
add more files to the same compaction run as long as the
sum of the files chosen till now is smaller than the next
candidate file size. This logic needs to be debated
and validated.
The above logic should reduce write amplification to a
large extent... will publish numbers shortly.
Test Plan: dbstress runs for 6 hours with no data corruption (tested so far).
Differential Revision: https://reviews.facebook.net/D11289
- Replace raw slice comparison with a call to user comparator.
Added test for custom comparators.
- Fix end of namespace comments.
- Fixed bug in picking inputs for a level-0 compaction.
When finding overlapping files, the covered range may expand
as files are added to the input set. We now correctly expand
the range when this happens instead of continuing to use the
old range. For example, suppose L0 contains files with the
following ranges:
F1: a .. d
F2: c .. g
F3: f .. j
and the initial compaction target is F3. We used to search
for range f..j which yielded {F2,F3}. However we now expand
the range as soon as another file is added. In this case,
when F2 is added, we expand the range to c..j and restart the
search. That picks up file F1 as well.
This change fixes a bug related to deleted keys showing up
incorrectly after a compaction as described in Issue 44.
(Sync with upstream @25072954)
* env_chromium.cc should not export symbols.
* Fix MSVC warnings.
* Removed large value support.
* Fix broken reference to documentation file
git-svn-id: https://leveldb.googlecode.com/svn/trunk@24 62dab493-f737-651d-591e-8d6aee1b9529
Cheng Chang