Tag:
Branch:
Tree:
570248aeff
main
oxigraph-8.1.1
oxigraph-8.3.2
oxigraph-main
${ noResults }
10107 Commits (570248aeff8873acdc8ebbad57962d02a1078aeb)
| Author | SHA1 | Message | Date |
|---|---|---|---|
Jay Zhuang
|
6c86543590 |
Fix manual compaction `max_compaction_bytes` under-calculated issue (#8269)
Summary: Fix a bug that for manual compaction, `max_compaction_bytes` is only limit the SST files from input level, but not overlapped files on output level. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8269 Test Plan: `make check` Reviewed By: ajkr Differential Revision: D28231044 Pulled By: jay-zhuang fbshipit-source-id: 9d7d03004f30cc4b1b9819830141436907554b7c |
4 years ago |
|
sdong
|
bd3d080ef8 |
Try to build with liburing by default. (#8322)
Summary: By default, try to build with liburing. For make, if ROCKSDB_USE_IO_URING is not set, treat as 1, which means RocksDB will try to build with liburing. For cmake, add WITH_LIBURING to control it, with default on. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8322 Test Plan: Build using cmake and make. Reviewed By: anand1976 Differential Revision: D28586498 fbshipit-source-id: cfd39159ab697f4b93a9293a59c07f839b1e7ed5 |
4 years ago |
|
sdong
|
2f1984dd45 |
Compare memtable insert and flush count (#8288)
Summary: When a memtable is flushed, it will validate number of entries it reads, and compare the number with how many entries inserted into memtable. This serves as one sanity c\ heck against memory corruption. This change will also allow more counters to be added in the future for better validation. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8288 Test Plan: Pass all existing tests Reviewed By: ajkr Differential Revision: D28369194 fbshipit-source-id: 7ff870380c41eab7f99eee508550dcdce32838ad |
4 years ago |
|
Jay Zhuang
|
94b4faa0f1 |
Deflake ExternalSSTFileTest.PickedLevelBug (#8307)
Summary: The test want to make sure these's no compaction during `AddFile` (between `DBImpl::AddFile:MutexLock` and `DBImpl::AddFile:MutexUnlock`) but the mutex could be unlocked by `EnterUnbatched()`. Move the lock start point after bumping the ingest file number. Also fix the dead lock when ASSERT fails. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8307 Reviewed By: ajkr Differential Revision: D28479849 Pulled By: jay-zhuang fbshipit-source-id: b3c50f66aa5d5f59c5c27f815bfea189c4cd06cb |
4 years ago |
|
dependabot[bot]
|
f76326e370 |
Bump nokogiri from 1.11.1 to 1.11.4 in /docs (#8318)
Summary: Bumps [nokogiri](https://github.com/sparklemotion/nokogiri) from 1.11.1 to 1.11.4. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/sparklemotion/nokogiri/releases">nokogiri's releases</a>.</em></p> <blockquote> <h2>1.11.4 / 2021-05-14</h2> <h3>Security</h3> <p>[CRuby] Vendored libxml2 upgraded to v2.9.12 which addresses:</p> <ul> <li><a href="https://security.archlinux.org/CVE-2019-20388">CVE-2019-20388</a></li> <li><a href="https://security.archlinux.org/CVE-2020-24977">CVE-2020-24977</a></li> <li><a href="https://security.archlinux.org/CVE-2021-3517">CVE-2021-3517</a></li> <li><a href="https://security.archlinux.org/CVE-2021-3518">CVE-2021-3518</a></li> <li><a href="https://security.archlinux.org/CVE-2021-3537">CVE-2021-3537</a></li> <li><a href="https://security.archlinux.org/CVE-2021-3541">CVE-2021-3541</a></li> </ul> <p>Note that two additional CVEs were addressed upstream but are not relevant to this release. <a href="https://security.archlinux.org/CVE-2021-3516">CVE-2021-3516</a> via <code>xmllint</code> is not present in Nokogiri, and <a href="https://security.archlinux.org/CVE-2020-7595">CVE-2020-7595</a> has been patched in Nokogiri since v1.10.8 (see <a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/1992">https://github.com/facebook/rocksdb/issues/1992</a>).</p> <p>Please see <a href="https://github.com/sparklemotion/nokogiri/security/advisories/GHSA-7rrm-v45f-jp64">nokogiri/GHSA-7rrm-v45f-jp64 </a> or <a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/2233">https://github.com/facebook/rocksdb/issues/2233</a> for a more complete analysis of these CVEs and patches.</p> <h3>Dependencies</h3> <ul> <li>[CRuby] vendored libxml2 is updated from 2.9.10 to 2.9.12. (Note that 2.9.11 was skipped because it was superseded by 2.9.12 a few hours after its release.)</li> </ul> <h2>1.11.3 / 2021-04-07</h2> <h3>Fixed</h3> <ul> <li>[CRuby] Passing non-<code>Node</code> objects to <code>Document#root=</code> now raises an <code>ArgumentError</code> exception. Previously this likely segfaulted. [<a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/1900">https://github.com/facebook/rocksdb/issues/1900</a>]</li> <li>[JRuby] Passing non-<code>Node</code> objects to <code>Document#root=</code> now raises an <code>ArgumentError</code> exception. Previously this raised a <code>TypeError</code> exception.</li> <li>[CRuby] arm64/aarch64 systems (like Apple's M1) can now compile libxml2 and libxslt from source (though we continue to strongly advise users to install the native gems for the best possible experience)</li> </ul> <h2>1.11.2 / 2021-03-11</h2> <h3>Fixed</h3> <ul> <li>[CRuby] <code>NodeSet</code> may now safely contain <code>Node</code> objects from multiple documents. Previously the GC lifecycle of the parent <code>Document</code> objects could lead to nodes being GCed while still in scope. [<a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/1952#issuecomment-770856928">https://github.com/facebook/rocksdb/issues/1952</a>]</li> <li>[CRuby] Patch libxml2 to avoid "huge input lookup" errors on large CDATA elements. (See upstream <a href="https://gitlab.gnome.org/GNOME/libxml2/-/issues/200">GNOME/libxml2#200</a> and <a href="https://gitlab.gnome.org/GNOME/libxml2/-/merge_requests/100">GNOME/libxml2!100</a>.) [<a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/2132">https://github.com/facebook/rocksdb/issues/2132</a>].</li> <li>[CRuby+Windows] Enable Nokogumbo (and other downstream gems) to compile and link against <code>nokogiri.so</code> by including <code>LDFLAGS</code> in <code>Nokogiri::VERSION_INFO</code>. [<a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/2167">https://github.com/facebook/rocksdb/issues/2167</a>]</li> <li>[CRuby] <code>{XML,HTML}::Document.parse</code> now invokes <code>#initialize</code> exactly once. Previously <code>#initialize</code> was invoked twice on each object.</li> <li>[JRuby] <code>{XML,HTML}::Document.parse</code> now invokes <code>#initialize</code> exactly once. Previously <code>#initialize</code> was not called, which was a problem for subclassing such as done by <code>Loofah</code>.</li> </ul> <h3>Improved</h3> <ul> <li>Reduce the number of object allocations needed when parsing an HTML::DocumentFragment. [<a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/2087">https://github.com/facebook/rocksdb/issues/2087</a>] (Thanks, <a href="https://github.com/ashmaroli"><code>@ashmaroli</code></a>!)</li> <li>[JRuby] Update the algorithm used to calculate <code>Node#line</code> to be wrong less-often. The underlying parser, Xerces, does not track line numbers, and so we've always used a hacky solution for this method. [<a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/1223">https://github.com/facebook/rocksdb/issues/1223</a>, <a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/2177">https://github.com/facebook/rocksdb/issues/2177</a>]</li> <li>Introduce <code>--enable-system-libraries</code> and <code>--disable-system-libraries</code> flags to <code>extconf.rb</code>. These flags provide the same functionality as <code>--use-system-libraries</code> and the <code>NOKOGIRI_USE_SYSTEM_LIBRARIES</code> environment variable, but are more idiomatic. [<a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/2193">https://github.com/facebook/rocksdb/issues/2193</a>] (Thanks, <a href="https://github.com/eregon"><code>@eregon</code></a>!)</li> <li>[TruffleRuby] <code>--disable-static</code> is now the default on TruffleRuby when the packaged libraries are used. This is more flexible and compiles faster. (Note, though, that the default on TR is still to use system libraries.) [<a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/2191#issuecomment-780724627">https://github.com/facebook/rocksdb/issues/2191</a>, <a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/2193">https://github.com/facebook/rocksdb/issues/2193</a>] (Thanks, <a href="https://github.com/eregon"><code>@eregon</code></a>!)</li> </ul> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/sparklemotion/nokogiri/blob/main/CHANGELOG.md">nokogiri's changelog</a>.</em></p> <blockquote> <h2>1.11.4 / 2021-05-14</h2> <h3>Security</h3> <p>[CRuby] Vendored libxml2 upgraded to v2.9.12 which addresses:</p> <ul> <li><a href="https://security.archlinux.org/CVE-2019-20388">CVE-2019-20388</a></li> <li><a href="https://security.archlinux.org/CVE-2020-24977">CVE-2020-24977</a></li> <li><a href="https://security.archlinux.org/CVE-2021-3517">CVE-2021-3517</a></li> <li><a href="https://security.archlinux.org/CVE-2021-3518">CVE-2021-3518</a></li> <li><a href="https://security.archlinux.org/CVE-2021-3537">CVE-2021-3537</a></li> <li><a href="https://security.archlinux.org/CVE-2021-3541">CVE-2021-3541</a></li> </ul> <p>Note that two additional CVEs were addressed upstream but are not relevant to this release. <a href="https://security.archlinux.org/CVE-2021-3516">CVE-2021-3516</a> via <code>xmllint</code> is not present in Nokogiri, and <a href="https://security.archlinux.org/CVE-2020-7595">CVE-2020-7595</a> has been patched in Nokogiri since v1.10.8 (see <a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/1992">https://github.com/facebook/rocksdb/issues/1992</a>).</p> <p>Please see <a href="https://github.com/sparklemotion/nokogiri/security/advisories/GHSA-7rrm-v45f-jp64">nokogiri/GHSA-7rrm-v45f-jp64 </a> or <a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/2233">https://github.com/facebook/rocksdb/issues/2233</a> for a more complete analysis of these CVEs and patches.</p> <h3>Dependencies</h3> <ul> <li>[CRuby] vendored libxml2 is updated from 2.9.10 to 2.9.12. (Note that 2.9.11 was skipped because it was superseded by 2.9.12 a few hours after its release.)</li> </ul> <h2>1.11.3 / 2021-04-07</h2> <h3>Fixed</h3> <ul> <li>[CRuby] Passing non-<code>Node</code> objects to <code>Document#root=</code> now raises an <code>ArgumentError</code> exception. Previously this likely segfaulted. [<a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/1900">https://github.com/facebook/rocksdb/issues/1900</a>]</li> <li>[JRuby] Passing non-<code>Node</code> objects to <code>Document#root=</code> now raises an <code>ArgumentError</code> exception. Previously this raised a <code>TypeError</code> exception.</li> <li>[CRuby] arm64/aarch64 systems (like Apple's M1) can now compile libxml2 and libxslt from source (though we continue to strongly advise users to install the native gems for the best possible experience)</li> </ul> <h2>1.11.2 / 2021-03-11</h2> <h3>Fixed</h3> <ul> <li>[CRuby] <code>NodeSet</code> may now safely contain <code>Node</code> objects from multiple documents. Previously the GC lifecycle of the parent <code>Document</code> objects could lead to nodes being GCed while still in scope. [<a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/1952#issuecomment-770856928">https://github.com/facebook/rocksdb/issues/1952</a>]</li> <li>[CRuby] Patch libxml2 to avoid "huge input lookup" errors on large CDATA elements. (See upstream <a href="https://gitlab.gnome.org/GNOME/libxml2/-/issues/200">GNOME/libxml2#200</a> and <a href="https://gitlab.gnome.org/GNOME/libxml2/-/merge_requests/100">GNOME/libxml2!100</a>.) [<a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/2132">https://github.com/facebook/rocksdb/issues/2132</a>].</li> <li>[CRuby+Windows] Enable Nokogumbo (and other downstream gems) to compile and link against <code>nokogiri.so</code> by including <code>LDFLAGS</code> in <code>Nokogiri::VERSION_INFO</code>. [<a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/2167">https://github.com/facebook/rocksdb/issues/2167</a>]</li> <li>[CRuby] <code>{XML,HTML}::Document.parse</code> now invokes <code>#initialize</code> exactly once. Previously <code>#initialize</code> was invoked twice on each object.</li> <li>[JRuby] <code>{XML,HTML}::Document.parse</code> now invokes <code>#initialize</code> exactly once. Previously <code>#initialize</code> was not called, which was a problem for subclassing such as done by <code>Loofah</code>.</li> </ul> <h3>Improved</h3> <ul> <li>Reduce the number of object allocations needed when parsing an <code>HTML::DocumentFragment</code>. [<a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/2087">https://github.com/facebook/rocksdb/issues/2087</a>] (Thanks, <a href="https://github.com/ashmaroli"><code>@ashmaroli</code></a>!)</li> <li>[JRuby] Update the algorithm used to calculate <code>Node#line</code> to be wrong less-often. The underlying parser, Xerces, does not track line numbers, and so we've always used a hacky solution for this method. [<a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/1223">https://github.com/facebook/rocksdb/issues/1223</a>, <a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/2177">https://github.com/facebook/rocksdb/issues/2177</a>]</li> <li>Introduce <code>--enable-system-libraries</code> and <code>--disable-system-libraries</code> flags to <code>extconf.rb</code>. These flags provide the same functionality as <code>--use-system-libraries</code> and the <code>NOKOGIRI_USE_SYSTEM_LIBRARIES</code> environment variable, but are more idiomatic. [<a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/2193">https://github.com/facebook/rocksdb/issues/2193</a>] (Thanks, <a href="https://github.com/eregon"><code>@eregon</code></a>!)</li> <li>[TruffleRuby] <code>--disable-static</code> is now the default on TruffleRuby when the packaged libraries are used. This is more flexible and compiles faster. (Note, though, that the default on TR is still to use system libraries.) [<a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/2191#issuecomment-780724627">https://github.com/facebook/rocksdb/issues/2191</a>, <a href="https://github-redirect.dependabot.com/sparklemotion/nokogiri/issues/2193">https://github.com/facebook/rocksdb/issues/2193</a>] (Thanks, <a href="https://github.com/eregon"><code>@eregon</code></a>!)</li> </ul> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
4 years ago |
|
Jay Zhuang
|
3786181a90 |
Add remote compaction public API (#8300)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/8300 Reviewed By: ajkr Differential Revision: D28464726 Pulled By: jay-zhuang fbshipit-source-id: 49e9f4fb791808a6cbf39a7b1a331373f645fc5e |
4 years ago |
|
Peter Dillinger
|
311a544c2a |
Use deleters to label cache entries and collect stats (#8297)
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
|
4 years ago |
|
Glebanister
|
748e3acc11 |
Add StartThread type checking wrapper (#8303)
Summary: - Add class `FunctorWrapper` to invoke the function with given parameters - Implement `StartThreadTyped` which wraps `StartThread` with type checking cover - Demonstrate `StartThreadTyped` in test `util/thread_local_test.cc` https://github.com/facebook/rocksdb/issues/8285 Pull Request resolved: https://github.com/facebook/rocksdb/pull/8303 Reviewed By: ajkr Differential Revision: D28539318 Pulled By: pdillinger fbshipit-source-id: 624789c236bde31163deda95c1e1471aee68933e |
4 years ago |
|
anand76
|
13232e11d4 |
Allow cache_bench/db_bench to use a custom secondary cache (#8312)
Summary: This PR adds a ```-secondary_cache_uri``` option to the cache_bench and db_bench tools to allow the user to specify a custom secondary cache URI. The object registry is used to create an instance of the ```SecondaryCache``` object of the type specified in the URI. The main cache_bench code is packaged into a separate library, similar to db_bench. An example invocation of db_bench with a secondary cache URI - ```db_bench --env_uri=ws://ws.flash_sandbox.vll1_2/ -db=anand/nvm_cache_2 -use_existing_db=true -benchmarks=readrandom -num=30000000 -key_size=32 -value_size=256 -use_direct_reads=true -cache_size=67108864 -cache_index_and_filter_blocks=true -secondary_cache_uri='cachelibwrapper://filename=/home/anand76/nvm_cache/cache_file;size=2147483648;regionSize=16777216;admPolicy=random;admProbability=1.0;volatileSize=8388608;bktPower=20;lockPower=12' -partition_index_and_filters=true -duration=1800``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/8312 Reviewed By: zhichao-cao Differential Revision: D28544325 Pulled By: anand1976 fbshipit-source-id: 8f209b9af900c459dc42daa7a610d5f00176eeed |
4 years ago |
|
sdong
|
871a2cb292 |
Fix test issue in new env_test tests (#8319)
Summary: The two new tests added to env_test don't clear sync points, so if tests are run in continuous mode, rather than parallel mode, the next test will trigger previous sync point and fail. Fix it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8319 Test Plan: Run the tests in continuous mode which used to fail and see them passing. Reviewed By: pdillinger Differential Revision: D28542562 fbshipit-source-id: 4052d487635188fe68a2a9df4b03d97b23f96720 |
4 years ago |
|
sdong
|
ce0fc71adf |
Minor improvements in env_test (#8317)
Summary: Fix typo in comments in env_test and add PermitUncheckedError() to two statuses. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8317 Reviewed By: jay-zhuang Differential Revision: D28525093 fbshipit-source-id: 7a1ed3e45b6f500b8d2ae19fa339c9368111e922 |
4 years ago |
|
anand76
|
9d61a0856d |
Sync ingested files only if reopen is supported by the FS (#8296)
Summary: Some file systems (especially distributed FS) do not support reopening a file for writing. The ExternalSstFileIngestionJob calls ReopenWritableFile in order to sync the ingested file, which typically makes sense only on a local file system with a page cache (i.e Posix). So this change tries to sync the ingested file only if ReopenWritableFile doesn't return Status::NotSupported(). Tests: Add a new unit test in external_sst_file_basic_test Pull Request resolved: https://github.com/facebook/rocksdb/pull/8296 Reviewed By: jay-zhuang Differential Revision: D28420865 Pulled By: anand1976 fbshipit-source-id: 380e7f5ff95324997f7a59864a9ac96ebbd0100c |
4 years ago |
|
sdong
|
60e5af83c1 |
Handle return code by io_uring_submit_and_wait() and io_uring_wait_cqe() (#8311)
Summary: Right now return codes by io_uring_submit_and_wait() and io_uring_wait_cqe() are not handled. It is not the good practice. Although these two functions are not supposed to return non-0 values in normal exeuction, people suspect that they might return non-0 value when an interruption happens, and the code might cause hanging. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8311 Test Plan: Make sure at least normal test cases still pass. Reviewed By: anand1976 Differential Revision: D28500828 fbshipit-source-id: 8a76cea9cafbd041102e0b6a8eef9d0bfed7c211 |
4 years ago |
|
mrambacher
|
6b0a22a4b0 |
Fix MultiGet with PinnableSlices and Merge for WBWI (#8299)
Summary: The MultiGetFromBatchAndDB would fail if the PinnableSlice value being returned was pinned. This could happen if the value was retrieved from the DB (not memtable) or potentially if the values were reused (and a previous iteration returned a slice that was pinned). This change resets the pinnable value to clear it prior to attempting to use it, thereby eliminating the problem with the value already being pinned. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8299 Reviewed By: jay-zhuang Differential Revision: D28455426 Pulled By: mrambacher fbshipit-source-id: a34d7d983ec9b6bb4c8a2b4892f72858d43e6972 |
4 years ago |
|
Stanislav Tkach
|
83d1a66598 |
Expose CompressionOptions::parallel_threads through C API (#8302)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/8302 Reviewed By: jay-zhuang Differential Revision: D28499262 Pulled By: ajkr fbshipit-source-id: 7b17b79af871d874dfca76db9bca0d640a6cd854 |
4 years ago |
|
Levi Tamasi
|
d83542ca83 |
Make it possible to apply only a subrange of table property collectors (#8298)
Summary: This patch does two things: 1) Introduces some aliases in order to eliminate/prevent long-winded type names w/r/t the internal table property collectors (see e.g. `std::vector<std::unique_ptr<IntTblPropCollectorFactory>>`). 2) Makes it possible to apply only a subrange of table property collectors during table building by turning `TableBuilderOptions::int_tbl_prop_collector_factories` from a pointer to a `vector` into a range (i.e. a pair of iterators). Rationale: I plan to introduce a BlobDB related table property collector, which should only be applied during table creation if blob storage is enabled at the moment (which can be changed dynamically). This change will make it possible to include/ exclude the BlobDB related collector as needed without having to introduce a second `vector` of collectors in `ColumnFamilyData` with pretty much the same contents. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8298 Test Plan: `make check` Reviewed By: jay-zhuang Differential Revision: D28430910 Pulled By: ltamasi fbshipit-source-id: a81d28f2c59495865300f43deb2257d2e6977c8e |
4 years ago |
|
sdong
|
0ed8cb666d |
Write file temperature information to manifest (#8284)
Summary: As a part of tiered storage, writing tempeature information to manifest is needed so that after DB recovery, RocksDB still has the tiering information, to implement some further necessary functionalities. Also fix some issues in simulated hybrid FS. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8284 Test Plan: Add a new unit test to validate that the information is indeed written and read back. Reviewed By: zhichao-cao Differential Revision: D28335801 fbshipit-source-id: 56aeb2e6ea090be0200181dd968c8a7278037def |
4 years ago |
|
anand76
|
feb06e83b2 |
Initial support for secondary cache in LRUCache (#8271)
Summary: Defined the abstract interface for a secondary cache in include/rocksdb/secondary_cache.h, and updated LRUCacheOptions to take a std::shared_ptr<SecondaryCache>. An item is initially inserted into the LRU (primary) cache. When it ages out and evicted from memory, its inserted into the secondary cache. On a LRU cache miss and successful lookup in the secondary cache, the item is promoted to the LRU cache. Only support synchronous lookup currently. The secondary cache would be used to implement a persistent (flash cache) or compressed cache. Tests: Results from cache_bench and db_bench don't show any regression due to these changes. cache_bench results before and after this change - Command ```./cache_bench -ops_per_thread=10000000 -threads=1``` Before ```Complete in 40.688 s; QPS = 245774``` ```Complete in 40.486 s; QPS = 246996``` ```Complete in 42.019 s; QPS = 237989``` After ```Complete in 40.672 s; QPS = 245869``` ```Complete in 44.622 s; QPS = 224107``` ```Complete in 42.445 s; QPS = 235599``` db_bench results before this change, and with this change + https://github.com/facebook/rocksdb/issues/8213 and https://github.com/facebook/rocksdb/issues/8191 - Commands ```./db_bench --benchmarks="fillseq,compact" -num=30000000 -key_size=32 -value_size=256 -use_direct_io_for_flush_and_compaction=true -db=/home/anand76/nvm_cache/db -partition_index_and_filters=true``` ```./db_bench -db=/home/anand76/nvm_cache/db -use_existing_db=true -benchmarks=readrandom -num=30000000 -key_size=32 -value_size=256 -use_direct_reads=true -cache_size=1073741824 -cache_numshardbits=6 -cache_index_and_filter_blocks=true -read_random_exp_range=17 -statistics -partition_index_and_filters=true -threads=16 -duration=300``` Before ``` DB path: [/home/anand76/nvm_cache/db] readrandom : 80.702 micros/op 198104 ops/sec; 54.4 MB/s (3708999 of 3708999 found) ``` ``` DB path: [/home/anand76/nvm_cache/db] readrandom : 87.124 micros/op 183625 ops/sec; 50.4 MB/s (3439999 of 3439999 found) ``` After ``` DB path: [/home/anand76/nvm_cache/db] readrandom : 77.653 micros/op 206025 ops/sec; 56.6 MB/s (3866999 of 3866999 found) ``` ``` DB path: [/home/anand76/nvm_cache/db] readrandom : 84.962 micros/op 188299 ops/sec; 51.7 MB/s (3535999 of 3535999 found) ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/8271 Reviewed By: zhichao-cao Differential Revision: D28357511 Pulled By: anand1976 fbshipit-source-id: d1cfa236f00e649a18c53328be10a8062a4b6da2 |
4 years ago |
|
Jay Zhuang
|
d15fbae449 |
Refactor Option obj address from char* to void* (#8295)
Summary: And replace `reinterpret_cast` with `static_cast` or no cast. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8295 Test Plan: `make check` Reviewed By: mrambacher Differential Revision: D28420303 Pulled By: jay-zhuang fbshipit-source-id: 645be123a0df624dc2bea37cd54a35403fc494fa |
4 years ago |
|
Andrew Kryczka
|
d76c46e6a0 |
Deflake TransactionStressTest.ExpiredTransactionDataRace1 (#8258)
Summary: We saw the `Commit()` fail with "Operation expired" so apparently the expiration time is too short. Increased the magnitude of the times in this test to make flakiness less likely. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8258 Reviewed By: jay-zhuang Differential Revision: D28177033 Pulled By: ajkr fbshipit-source-id: 0357acee6cc14c104b6ccd39231a683a606ab130 |
4 years ago |
|
Jay Zhuang
|
a79b46c503 |
Add De/Serialization for CompactionInput/Result (#8247)
Summary: The functions will be used for remote compaction parameter input and result. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8247 Test Plan: `make check` Reviewed By: ajkr Differential Revision: D28104680 Pulled By: jay-zhuang fbshipit-source-id: c0a5178e6277125118384278efea2acbf90aa6cb |
4 years ago |
|
Jay Zhuang
|
e9a0bc14dd |
Fix cmake failed to build db_bench (#8289)
Summary: And change the cmake build on macos with GFLAGS on to cover more cases. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8289 Reviewed By: zhichao-cao Differential Revision: D28372467 Pulled By: jay-zhuang fbshipit-source-id: ad7fbe523c3fb135ef5281adbaf2070ca5d0873d |
4 years ago |
|
Jay Zhuang
|
a6e425dc44 |
Fix a minor clang release build failure (#8290)
Summary:
Error message:
```
cache/clock_cache.cc:434:14: error: implicit conversion loses integer precision: 'size_t' (aka 'unsigned long') to 'uint32_t' (aka 'unsigned int') [-Werror,-Wshorten-64-to-32]
*state = end_idx;
~ ^~~~~~~
```
Make circleci to cover this case by install tbb.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8290
Test Plan: `USE_CLANG=1 make -j1 release`
Reviewed By: akankshamahajan15
Differential Revision: D28374672
Pulled By: jay-zhuang
fbshipit-source-id: e8c3ee46f2a008e8a599413292e5a4b5151365df
|
4 years ago |
|
Peter Dillinger
|
78a309bf86 |
New Cache API for gathering statistics (#8225)
Summary: Adds a new Cache::ApplyToAllEntries API that we expect to use (in follow-up PRs) for efficiently gathering block cache statistics. Notable features vs. old ApplyToAllCacheEntries: * Includes key and deleter (in addition to value and charge). We could have passed in a Handle but then more virtual function calls would be needed to get the "fields" of each entry. We expect to use the 'deleter' to identify the origin of entries, perhaps even more. * Heavily tuned to minimize latency impact on operating cache. It does this by iterating over small sections of each cache shard while cycling through the shards. * Supports tuning roughly how many entries to operate on for each lock acquire and release, to control the impact on the latency of other operations without excessive lock acquire & release. The right balance can depend on the cost of the callback. Good default seems to be around 256. * There should be no need to disable thread safety. (I would expect uncontended locks to be sufficiently fast.) I have enhanced cache_bench to validate this approach: * Reports a histogram of ns per operation, so we can look at the ditribution of times, not just throughput (average). * Can add a thread for simulated "gather stats" which calls ApplyToAllEntries at a specified interval. We also generate a histogram of time to run ApplyToAllEntries. To make the iteration over some entries of each shard work as cleanly as possible, even with resize between next set of entries, I have re-arranged which hash bits are used for sharding and which for indexing within a shard. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8225 Test Plan: A couple of unit tests are added, but primary validation is manual, as the primary risk is to performance. The primary validation is using cache_bench to ensure that neither the minor hashing changes nor the simulated stats gathering significantly impact QPS or latency distribution. Note that adding op latency histogram seriously impacts the benchmark QPS, so for a fair baseline, we need the cache_bench changes (except remove simulated stat gathering to make it compile). In short, we don't see any reproducible difference in ops/sec or op latency unless we are gathering stats nearly continuously. Test uses 10GB block cache with 8KB values to be somewhat realistic in the number of items to iterate over. Baseline typical output: ``` Complete in 92.017 s; Rough parallel ops/sec = 869401 Thread ops/sec = 54662 Operation latency (ns): Count: 80000000 Average: 11223.9494 StdDev: 29.61 Min: 0 Median: 7759.3973 Max: 9620500 Percentiles: P50: 7759.40 P75: 14190.73 P99: 46922.75 P99.9: 77509.84 P99.99: 217030.58 ------------------------------------------------------ [ 0, 1 ] 68 0.000% 0.000% ( 2900, 4400 ] 89 0.000% 0.000% ( 4400, 6600 ] 33630240 42.038% 42.038% ######## ( 6600, 9900 ] 18129842 22.662% 64.700% ##### ( 9900, 14000 ] 7877533 9.847% 74.547% ## ( 14000, 22000 ] 15193238 18.992% 93.539% #### ( 22000, 33000 ] 3037061 3.796% 97.335% # ( 33000, 50000 ] 1626316 2.033% 99.368% ( 50000, 75000 ] 421532 0.527% 99.895% ( 75000, 110000 ] 56910 0.071% 99.966% ( 110000, 170000 ] 16134 0.020% 99.986% ( 170000, 250000 ] 5166 0.006% 99.993% ( 250000, 380000 ] 3017 0.004% 99.996% ( 380000, 570000 ] 1337 0.002% 99.998% ( 570000, 860000 ] 805 0.001% 99.999% ( 860000, 1200000 ] 319 0.000% 100.000% ( 1200000, 1900000 ] 231 0.000% 100.000% ( 1900000, 2900000 ] 100 0.000% 100.000% ( 2900000, 4300000 ] 39 0.000% 100.000% ( 4300000, 6500000 ] 16 0.000% 100.000% ( 6500000, 9800000 ] 7 0.000% 100.000% ``` New, gather_stats=false. Median thread ops/sec of 5 runs: ``` Complete in 92.030 s; Rough parallel ops/sec = 869285 Thread ops/sec = 54458 Operation latency (ns): Count: 80000000 Average: 11298.1027 StdDev: 42.18 Min: 0 Median: 7722.0822 Max: 6398720 Percentiles: P50: 7722.08 P75: 14294.68 P99: 47522.95 P99.9: 85292.16 P99.99: 228077.78 ------------------------------------------------------ [ 0, 1 ] 109 0.000% 0.000% ( 2900, 4400 ] 793 0.001% 0.001% ( 4400, 6600 ] 34054563 42.568% 42.569% ######### ( 6600, 9900 ] 17482646 21.853% 64.423% #### ( 9900, 14000 ] 7908180 9.885% 74.308% ## ( 14000, 22000 ] 15032072 18.790% 93.098% #### ( 22000, 33000 ] 3237834 4.047% 97.145% # ( 33000, 50000 ] 1736882 2.171% 99.316% ( 50000, 75000 ] 446851 0.559% 99.875% ( 75000, 110000 ] 68251 0.085% 99.960% ( 110000, 170000 ] 18592 0.023% 99.983% ( 170000, 250000 ] 7200 0.009% 99.992% ( 250000, 380000 ] 3334 0.004% 99.997% ( 380000, 570000 ] 1393 0.002% 99.998% ( 570000, 860000 ] 700 0.001% 99.999% ( 860000, 1200000 ] 293 0.000% 100.000% ( 1200000, 1900000 ] 196 0.000% 100.000% ( 1900000, 2900000 ] 69 0.000% 100.000% ( 2900000, 4300000 ] 32 0.000% 100.000% ( 4300000, 6500000 ] 10 0.000% 100.000% ``` New, gather_stats=true, 1 second delay between scans. Scans take about 1 second here so it's spending about 50% time scanning. Still the effect on ops/sec and latency seems to be in the noise. Median thread ops/sec of 5 runs: ``` Complete in 91.890 s; Rough parallel ops/sec = 870608 Thread ops/sec = 54551 Operation latency (ns): Count: 80000000 Average: 11311.2629 StdDev: 45.28 Min: 0 Median: 7686.5458 Max: 10018340 Percentiles: P50: 7686.55 P75: 14481.95 P99: 47232.60 P99.9: 79230.18 P99.99: 232998.86 ------------------------------------------------------ [ 0, 1 ] 71 0.000% 0.000% ( 2900, 4400 ] 291 0.000% 0.000% ( 4400, 6600 ] 34492060 43.115% 43.116% ######### ( 6600, 9900 ] 16727328 20.909% 64.025% #### ( 9900, 14000 ] 7845828 9.807% 73.832% ## ( 14000, 22000 ] 15510654 19.388% 93.220% #### ( 22000, 33000 ] 3216533 4.021% 97.241% # ( 33000, 50000 ] 1680859 2.101% 99.342% ( 50000, 75000 ] 439059 0.549% 99.891% ( 75000, 110000 ] 60540 0.076% 99.967% ( 110000, 170000 ] 14649 0.018% 99.985% ( 170000, 250000 ] 5242 0.007% 99.991% ( 250000, 380000 ] 3260 0.004% 99.995% ( 380000, 570000 ] 1599 0.002% 99.997% ( 570000, 860000 ] 1043 0.001% 99.999% ( 860000, 1200000 ] 471 0.001% 99.999% ( 1200000, 1900000 ] 275 0.000% 100.000% ( 1900000, 2900000 ] 143 0.000% 100.000% ( 2900000, 4300000 ] 60 0.000% 100.000% ( 4300000, 6500000 ] 27 0.000% 100.000% ( 6500000, 9800000 ] 7 0.000% 100.000% ( 9800000, 14000000 ] 1 0.000% 100.000% Gather stats latency (us): Count: 46 Average: 980387.5870 StdDev: 60911.18 Min: 879155 Median: 1033777.7778 Max: 1261431 Percentiles: P50: 1033777.78 P75: 1120666.67 P99: 1261431.00 P99.9: 1261431.00 P99.99: 1261431.00 ------------------------------------------------------ ( 860000, 1200000 ] 45 97.826% 97.826% #################### ( 1200000, 1900000 ] 1 2.174% 100.000% Most recent cache entry stats: Number of entries: 1295133 Total charge: 9.88 GB Average key size: 23.4982 Average charge: 8.00 KB Unique deleters: 3 ``` Reviewed By: mrambacher Differential Revision: D28295742 Pulled By: pdillinger fbshipit-source-id: bbc4a552f91ba0fe10e5cc025c42cef5a81f2b95 |
4 years ago |
|
mrambacher
|
78e82410eb |
Added static methods for simple types to OptionTypeInfo (#8249)
Summary: Added ParseType, SerializeType, and TypesAreEqual methods to OptionTypeInfo. These methods can be used for serialization and deserialization of basic types. Change the MutableCF/DB Options to use this format. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8249 Reviewed By: jay-zhuang Differential Revision: D28351190 Pulled By: mrambacher fbshipit-source-id: 72a78643b804f2f0bf59c32ffefa63346672ad16 |
4 years ago |
|
mrambacher
|
9f2d255aed |
Add ObjectRegistry to ConfigOptions (#8166)
Summary: This change enables a couple of things: - Different ConfigOptions can have different registry/factory associated with it, thereby allowing things like a "Test" ConfigOptions versus a "Production" - The ObjectRegistry is created fewer times and can be re-used The ConfigOptions can also be initialized/constructed from a DBOptions, in which case it will grab some of its settings (Env, Logger) from the DBOptions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8166 Reviewed By: zhichao-cao Differential Revision: D27657952 Pulled By: mrambacher fbshipit-source-id: ae1d6200bb7ab127405cdeefaba43c7fe694dfdd |
4 years ago |
|
mrambacher
|
ff463742b5 |
Add Merge Operator support to WriteBatchWithIndex (#8135)
Summary:
The WBWI has two differing modes of operation dependent on the value
of the constructor parameter `overwrite_key`.
Currently, regardless of the parameter, neither mode performs as
expected when using Merge. This PR remedies this by correctly invoking
the appropriate Merge Operator before returning results from the WBWI.
Examples of issues that exist which are solved by this PR:
## Example 1 with `overwrite_key=false`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
Get('k1')
```
Incorrectly yields `v2`, that is to say that the Merge behaves like a Put.
## Example 2 with o`verwrite_key=true`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
Get('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
## Example 3 with `overwrite_key=false`
Currently, with a database containing `('k1' -> 'v1')`, the following sequence:
```
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `v1,v2`
## Example 4 with `overwrite_key=true`
Currently, with a database containing `('k1' -> 'v1')`, the following sequence:
```
Merge('k1', 'v1')
GetFromBatchAndDB('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
## Example 5 with `overwrite_key=false`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `v1,v2`
## Example 6 with `overwrite_key=true`
Currently, from an empty database, `('k1' -> 'v1')`, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8135
Reviewed By: pdillinger
Differential Revision: D27657938
Pulled By: mrambacher
fbshipit-source-id: 0fbda6bbc66bedeba96a84786d90141d776297df
|
4 years ago |
|
sdong
|
f89a53655d |
Change date format in HISTORY.md (#8278)
Summary: Per previous discussion, change date format in HISTORY.md to follow ISO 8601. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8278 Reviewed By: jay-zhuang Differential Revision: D28294022 fbshipit-source-id: 563f29c56143519b4a871df82a17dd0a168a578c |
4 years ago |
|
Andrew Kryczka
|
a639c02f8e |
Allow applying `CompactionFilter` outside of compaction (#8243)
Summary: From HISTORY.md release note: - Allow `CompactionFilter`s to apply in more table file creation scenarios such as flush and recovery. For compatibility, `CompactionFilter`s by default apply during compaction. Users can customize this behavior by overriding `CompactionFilterFactory::ShouldFilterTableFileCreation()`. - Removed unused structure `CompactionFilterContext` Pull Request resolved: https://github.com/facebook/rocksdb/pull/8243 Test Plan: added unit tests Reviewed By: pdillinger Differential Revision: D28088089 Pulled By: ajkr fbshipit-source-id: 0799be7908e3b39fea09fc3f1ab00e13ad817fae |
4 years ago |
|
dependabot[bot]
|
242ac6c17c |
Bump rexml from 3.2.4 to 3.2.5 in /docs (#8251)
Summary: Bumps [rexml](https://github.com/ruby/rexml) from 3.2.4 to 3.2.5. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/ruby/rexml/blob/master/NEWS.md">rexml's changelog</a>.</em></p> <blockquote> <h2>3.2.5 - 2021-04-05 {#version-3-2-5}</h2> <h3>Improvements</h3> <ul> <li> <p>Add more validations to XPath parser.</p> </li> <li> <p><code>require "rexml/document"</code> by default. [GitHub#36][Patch by Koichi ITO]</p> </li> <li> <p>Don't add <code>#dcloe</code> method to core classes globally. [GitHub#37][Patch by Akira Matsuda]</p> </li> <li> <p>Add more documentations. [Patch by Burdette Lamar]</p> </li> <li> <p>Added <code>REXML::Elements#parent</code>. [GitHub#52][Patch by Burdette Lamar]</p> </li> </ul> <h3>Fixes</h3> <ul> <li> <p>Fixed a bug that <code>REXML::DocType#clone</code> doesn't copy external ID information.</p> </li> <li> <p>Fixed round-trip vulnerability bugs. See also: <a href="https://www.ruby-lang.org/en/news/2021/04/05/xml-round-trip-vulnerability-in-rexml-cve-2021-28965/">https://www.ruby-lang.org/en/news/2021/04/05/xml-round-trip-vulnerability-in-rexml-cve-2021-28965/</a> [HackerOne#1104077][CVE-2021-28965][Reported by Juho Nurminen]</p> </li> </ul> <h3>Thanks</h3> <ul> <li> <p>Koichi ITO</p> </li> <li> <p>Akira Matsuda</p> </li> <li> <p>Burdette Lamar</p> </li> <li> <p>Juho Nurminen</p> </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
4 years ago |
|
Peter Dillinger
|
c26b75baa5 |
Deprecate obsolete "backupable db" from public APIs (#8274)
Summary: An early design of BackupEngine used stackable DB, so I guess a DB had to opt-in to being backupable. Unfortunately the naming of that obsolete design still infects our public API and implementation. This change fixes the public API, with a deprecated backward-compatibility header. `BackupableDBOptions` is renamed to `BackupEngineOptions` (copy-replace in the public header) and backup_engine.h replaces backupable_db.h (present for backward compatibility). The only other change in backupable_db.h -> backup_engine.h is cleaning up headers. Later changes will fix the internal implementation. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8274 Test Plan: The internal implementation of BackupEngine uses the name BackupEngineOptions, while the unit tests use the old name BackupableDBOptions. This gives me confidence that both still work. Reviewed By: mrambacher Differential Revision: D28259471 Pulled By: pdillinger fbshipit-source-id: a25dbe327b9772143488e7bb0ec7139ee42d0613 |
4 years ago |
|
sdong
|
a4919d6b62 |
Cap automatic arena block size to 1 MB (#7907)
Summary: Larger arena block size does provide the benefit of reducing allocation overhead, however it may cause other troubles. For example, allocator is more likely not to allocate them to physical memory and trigger page fault. Weighing the risk, we cap the arena block size to 1MB. Users can always use a larger value if they want. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7907 Test Plan: Run all existing tests Reviewed By: pdillinger Differential Revision: D26135269 fbshipit-source-id: b7f55afd03e6ee1d8715f90fa11b6c33944e9ea8 |
4 years ago |
|
Peter Dillinger
|
ecd63b9262 |
Revert accidental enabling broken ClockCache in stress test (#8277)
Summary: From https://github.com/facebook/rocksdb/issues/8261 Pull Request resolved: https://github.com/facebook/rocksdb/pull/8277 Test Plan: briefly make blackbox_crash_test Reviewed By: zhichao-cao Differential Revision: D28270648 Pulled By: pdillinger fbshipit-source-id: 9bfd46c5a1a449165f6597bddb17af910331773f |
4 years ago |
|
Andrew Kryczka
|
b71b4597e7 |
Permit stdout "fail"/"error" in whitebox crash test (#8272)
Summary: In https://github.com/facebook/rocksdb/issues/8268, the `db_stress` stdout began containing both the strings "fail" and "error" (case-insensitive). The whitebox crash test failed upon seeing either of those strings. I checked that all other occurrences of "fail" and "error" (case-insensitive) that `db_stress` produces are printed to `stderr`. So this PR separates the handling of `db_stress`'s stdout and stderr, and only fails when one those bad strings are found in stderr. The downside of this PR is `db_stress`'s original interleaving of stdout/stderr is not preserved in `db_crashtest.py`'s output. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8272 Test Plan: run it; see it succeeds for several runs until encountering a real error ``` $ python3 tools/db_crashtest.py whitebox --simple --random_kill_odd=8887 --max_key=1000000 --value_size_mult=33 ... db_stress: cache/clock_cache.cc:483: bool rocksdb::{anonymous}::ClockCacheShard::Unref(rocksdb::{anonymous}::CacheHandle*, bool, rocksdb::{anonymous}::CleanupContext*): Assertion `CountRefs(flags) > 0' failed. TEST FAILED. Output has 'fail'!!! ``` Reviewed By: zhichao-cao Differential Revision: D28239233 Pulled By: ajkr fbshipit-source-id: 3b8602a0d570466a7e2c81bb9c49468f7716091e |
4 years ago |
|
sdong
|
7f3a0f5bc6 |
db_stress: wait for compaction to finish after open with failure injection (#8270)
Summary: When injecting in DB open, error can happen in background threads, causing DB open succeed, but DB is soon made read-only and subsequence writes will fail, which is not expected. To prevent it from happening, wait for compaction to finish before serving the traffic. If there is a failure, reopen. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8270 Test Plan: Run the test. Reviewed By: ajkr Differential Revision: D28230537 fbshipit-source-id: e2e97888904f9b9bb50c35ccf95b88c2319ef5c3 |
4 years ago |
|
sdong
|
e19908cba6 |
Refactor kill point (#8241)
Summary: Refactor kill point to one single class, rather than several extern variables. The intention was to drop unflushed data before killing to simulate some job, and I tried to a pointer to fault ingestion fs to the killing class, but it ended up with harder than I thought. Perhaps we'll need to do this in another way. But I thought the refactoring itself is good so I send it out. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8241 Test Plan: make release and run crash test for a while. Reviewed By: anand1976 Differential Revision: D28078486 fbshipit-source-id: f9182c1455f52e6851c13f88a21bade63bcec45f |
4 years ago |
|
mrambacher
|
8948dc8524 |
Make ImmutableOptions struct that inherits from ImmutableCFOptions and ImmutableDBOptions (#8262)
Summary: The ImmutableCFOptions contained a bunch of fields that belonged to the ImmutableDBOptions. This change cleans that up by introducing an ImmutableOptions struct. Following the pattern of Options struct, this class inherits from the DB and CFOption structs (of the Immutable form). Only one structural change (the ImmutableCFOptions::fs was changed to a shared_ptr from a raw one) is in this PR. All of the other changes involve moving the member variables from the ImmutableCFOptions into the ImmutableOptions and changing member variables or function parameters as required for compilation purposes. Follow-on PRs may do a further clean-up of the code, such as renaming variables (such as "ImmutableOptions cf_options") and potentially eliminating un-needed function parameters (there is no longer a need to pass both an ImmutableDBOptions and an ImmutableOptions to a function). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8262 Reviewed By: pdillinger Differential Revision: D28226540 Pulled By: mrambacher fbshipit-source-id: 18ae71eadc879dedbe38b1eb8e6f9ff5c7147dbf |
4 years ago |
|
Andrew Kryczka
|
0f42e50fec |
Fix `GetLiveFiles()` returning OPTIONS-000000 (#8268)
Summary: See release note in HISTORY.md. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8268 Test Plan: unit test repro Reviewed By: siying Differential Revision: D28227901 Pulled By: ajkr fbshipit-source-id: faf61d13b9e43a761e3d5dcf8203923126b51339 |
4 years ago |
|
Peter Dillinger
|
3b981eaa1d |
Fix use-after-free threading bug in ClockCache (#8261)
Summary: In testing for https://github.com/facebook/rocksdb/issues/8225 I found cache_bench would crash with -use_clock_cache, as well as db_bench -use_clock_cache, but not single-threaded. Smaller cache size hits failure much faster. ASAN reported the failuer as calling malloc_usable_size on the `key` pointer of a ClockCache handle after it was reportedly freed. On detailed inspection I found this bad sequence of operations for a cache entry: state=InCache=1,refs=1 [thread 1] Start ClockCacheShard::Unref (from Release, no mutex) [thread 1] Decrement ref count state=InCache=1,refs=0 [thread 1] Suspend before CalcTotalCharge (no mutex) [thread 2] Start UnsetInCache (from Insert, mutex held) [thread 2] clear InCache bit state=InCache=0,refs=0 [thread 2] Calls RecycleHandle (based on pre-updated state) [thread 2] Returns to Insert which calls Cleanup which deletes `key` [thread 1] Resume ClockCacheShard::Unref [thread 1] Read `key` in CalcTotalCharge To fix this, I've added a field to the handle to store the metadata charge so that we can efficiently remember everything we need from the handle in Unref. We must not read from the handle again if we decrement the count to zero with InCache=1, which means we don't own the entry and someone else could eject/overwrite it immediately. Note before this change, on amd64 sizeof(Handle) == 56 even though there are only 48 bytes of data. Grouping together the uint32_t fields would cut it down to 48, but I've added another uint32_t, which takes it back up to 56. Not a big deal. Also fixed DisownData to cooperate with ASAN as in LRUCache. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8261 Test Plan: Manual + adding use_clock_cache to db_crashtest.py Base performance ./cache_bench -use_clock_cache Complete in 17.060 s; QPS = 2458513 New performance ./cache_bench -use_clock_cache Complete in 17.052 s; QPS = 2459695 Any difference is easily buried in small noise. Crash test shows still more bug(s) in ClockCache, so I'm expecting to disable ClockCache from production code in a follow-up PR (if we can't find and fix the bug(s)) Reviewed By: mrambacher Differential Revision: D28207358 Pulled By: pdillinger fbshipit-source-id: aa7a9322afc6f18f30e462c75dbbe4a1206eb294 |
4 years ago |
|
Andrew Kryczka
|
c70bae1b05 |
Fix ConcurrentTaskLimiter token release for shutdown (#8253)
Summary:
Previously the shutdown process did not properly wait for all
`compaction_thread_limiter` tokens to be released before proceeding to
delete the DB's C++ objects. When this happened, we saw tests like
"DBCompactionTest.CompactionLimiter" flake with the following error:
```
virtual
rocksdb::ConcurrentTaskLimiterImpl::~ConcurrentTaskLimiterImpl():
Assertion `outstanding_tasks_ == 0' failed.
```
There is a case where a token can still be alive even after the shutdown
process has waited for BG work to complete. In particular, this happens
because the shutdown process only waits for flush/compaction scheduled/unscheduled counters to all
reach zero. These counters are decremented in `BackgroundCallCompaction()`
functions. However, tokens are released in `BGWork*Compaction()` functions, which
actually wrap the `BackgroundCallCompaction()` function.
A simple sleep could repro the race condition:
```
$ diff --git a/db/db_impl/db_impl_compaction_flush.cc
b/db/db_impl/db_impl_compaction_flush.cc
index 806bc548a..ba59efa89 100644
--- a/db/db_impl/db_impl_compaction_flush.cc
+++ b/db/db_impl/db_impl_compaction_flush.cc
@@ -2442,6 +2442,7 @@ void DBImpl::BGWorkCompaction(void* arg) {
static_cast<PrepickedCompaction*>(ca.prepicked_compaction);
static_cast_with_check<DBImpl>(ca.db)->BackgroundCallCompaction(
prepicked_compaction, Env::Priority::LOW);
+ sleep(1);
delete prepicked_compaction;
}
$ ./db_compaction_test --gtest_filter=DBCompactionTest.CompactionLimiter
db_compaction_test: util/concurrent_task_limiter_impl.cc:24: virtual rocksdb::ConcurrentTaskLimiterImpl::~ConcurrentTaskLimiterImpl(): Assertion `outstanding_tasks_ == 0' failed.
Received signal 6 (Aborted)
#0 /usr/local/fbcode/platform007/lib/libc.so.6(gsignal+0xcf) [0x7f02673c30ff] ?? ??:0
https://github.com/facebook/rocksdb/issues/1 /usr/local/fbcode/platform007/lib/libc.so.6(abort+0x134) [0x7f02673ac934] ?? ??:0
...
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8253
Test Plan: sleeps to expose race conditions
Reviewed By: akankshamahajan15
Differential Revision: D28168064
Pulled By: ajkr
fbshipit-source-id: 9e5167c74398d323e7975980c5cc00f450631160
|
4 years ago |
|
Andrew Kryczka
|
c2a3424de5 |
Deflake DBTest.L0L1L2AndUpHitCounter (#8259)
Summary: Previously we saw flakes on platforms like arm on CircleCI, such as the following: ``` Note: Google Test filter = DBTest.L0L1L2AndUpHitCounter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from DBTest [ RUN ] DBTest.L0L1L2AndUpHitCounter db/db_test.cc:5345: Failure Expected: (TestGetTickerCount(options, GET_HIT_L0)) > (100), actual: 30 vs 100 [ FAILED ] DBTest.L0L1L2AndUpHitCounter (150 ms) [----------] 1 test from DBTest (150 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (150 ms total) [ PASSED ] 0 tests. [ FAILED ] 1 test, listed below: [ FAILED ] DBTest.L0L1L2AndUpHitCounter ``` The test was totally non-deterministic, e.g., flush/compaction timing would affect how many files on each level. Furthermore, it depended heavily on platform-specific details, e.g., by having a 32KB memtable, it could become full with a very different number of entries depending on the platform. This PR rewrites the test to build a deterministic LSM with one file per level. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8259 Reviewed By: mrambacher Differential Revision: D28178100 Pulled By: ajkr fbshipit-source-id: 0a03b26e8d23c29d8297c1bccb1b115dce33bdcd |
4 years ago |
|
Jay Zhuang
|
8a92564a82 |
Update CircleCI MacOS Xcode version to 11.3.0 (#8256)
Summary: To fix CircleCI pyenv installation failure. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8256 Reviewed By: ajkr Differential Revision: D28191772 Pulled By: jay-zhuang fbshipit-source-id: 2bbb1d5ded473e510c11c8ed27884c4ad073973f |
4 years ago |
|
sdong
|
c3ff14e2c1 |
Hint temperature of bottommost level files to FileSystem (#8222)
Summary: As the first part of the effort of having placing different files on different storage types, this change introduces several things: (1) An experimental interface in FileSystem that specify temperature to a new file created. (2) A test FileSystemWrapper, SimulatedHybridFileSystem, that simulates HDD for a file of "warm" temperature. (3) A simple experimental feature ColumnFamilyOptions.bottommost_temperature. RocksDB would pass this value to FileSystem when creating any bottommost file. (4) A db_bench parameter that applies the (2) and (3) to db_bench. The motivation of the change is to introduce minimal changes that allow us to evolve tiered storage development. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8222 Test Plan: ./db_bench --benchmarks=fillrandom --write_buffer_size=2000000 -max_bytes_for_level_base=20000000 -level_compaction_dynamic_level_bytes --reads=100 -compaction_readahead_size=20000000 --reads=100000 -num=10000000 followed by ./db_bench --benchmarks=readrandom,stats --write_buffer_size=2000000 -max_bytes_for_level_base=20000000 -simulate_hybrid_fs_file=/tmp/warm_file_list -level_compaction_dynamic_level_bytes -compaction_readahead_size=20000000 --reads=500 --threads=16 -use_existing_db --num=10000000 and see results as expected. Reviewed By: ajkr Differential Revision: D28003028 fbshipit-source-id: 4724896d5205730227ba2f17c3fecb11261744ce |
4 years ago |
|
Peter Dillinger
|
d2ca04e3ed |
Add more LSM info to FilterBuildingContext (#8246)
Summary: Add `num_levels`, `is_bottommost`, and table file creation `reason` to `FilterBuildingContext`, in anticipation of more powerful Bloom-like filter support. To support this, added `is_bottommost` and `reason` to `TableBuilderOptions`, which allowed removing `reason` parameter from `rocksdb::BuildTable`. I attempted to remove `skip_filters` from `TableBuilderOptions`, because filter construction decisions should arise from options, not one-off parameters. I could not completely remove it because the public API for SstFileWriter takes a `skip_filters` parameter, and translating this into an option change would mean awkwardly replacing the table_factory if it is BlockBasedTableFactory with new filter_policy=nullptr option. I marked this public skip_filters option as deprecated because of this oddity. (skip_filters on the read side probably makes sense.) At least `skip_filters` is now largely hidden for users of `TableBuilderOptions` and is no longer used for implementing the optimize_filters_for_hits option. Bringing the logic for that option closer to handling of FilterBuildingContext makes it more obvious that hese two are using the same notion of "bottommost." (Planned: configuration options for Bloom-like filters that generalize `optimize_filters_for_hits`) Recommended follow-up: Try to get away from "bottommost level" naming of things, which is inaccurate (see VersionStorageInfo::RangeMightExistAfterSortedRun), and move to "bottommost run" or just "bottommost." Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246 Test Plan: extended an existing unit test to exercise and check various filter building contexts. Also, existing tests for optimize_filters_for_hits validate some of the "bottommost" handling, which is now closely connected to FilterBuildingContext::is_bottommost through TableBuilderOptions::is_bottommost Reviewed By: mrambacher Differential Revision: D28099346 Pulled By: pdillinger fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a |
4 years ago |
|
Peter Dillinger
|
85becd94c1 |
Refactor: use TableBuilderOptions to reduce parameter lists (#8240)
Summary: Greatly reduced the not-quite-copy-paste giant parameter lists of rocksdb::NewTableBuilder, rocksdb::BuildTable, BlockBasedTableBuilder::Rep ctor, and BlockBasedTableBuilder ctor. Moved weird separate parameter `uint32_t column_family_id` of TableFactory::NewTableBuilder into TableBuilderOptions. Re-ordered parameters to TableBuilderOptions ctor, so that `uint64_t target_file_size` is not randomly placed between uint64_t timestamps (was easy to mix up). Replaced a couple of fields of BlockBasedTableBuilder::Rep with a FilterBuildingContext. The motivation for this change is making it easier to pass along more data into new fields in FilterBuildingContext (follow-up PR). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8240 Test Plan: ASAN make check Reviewed By: mrambacher Differential Revision: D28075891 Pulled By: pdillinger fbshipit-source-id: fddb3dbb8260a0e8bdcbb51b877ebabf9a690d4f |
4 years ago |
|
Akanksha Mahajan
|
a0e0feca62 |
Improve BlockPrefetcher to prefetch only for sequential scans (#7394)
Summary: BlockPrefetcher is used by iterators to prefetch data if they anticipate more data to be used in future and this is valid for forward sequential scans. But BlockPrefetcher tracks only num_file_reads_ and not if reads are sequential. This presents problem for MultiGet with large number of keys when it reseeks index iterator and data block. FilePrefetchBuffer can end up doing large readahead for reseeks as readahead size increases exponentially once readahead is enabled. Same issue is with BlockBasedTableIterator. Add previous length and offset read as well in BlockPrefetcher (creates FilePrefetchBuffer) and FilePrefetchBuffer (does prefetching of data) to determine if reads are sequential and then prefetch. Update the last block read after cache hit to take reads from cache also in account. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7394 Test Plan: Add new unit test case Reviewed By: anand1976 Differential Revision: D23737617 Pulled By: akankshamahajan15 fbshipit-source-id: 8e6917c25ed87b285ee495d1b68dc623d71205a3 |
4 years ago |
|
anand76
|
0db4cde6e2 |
Fix a memory leak in c_test (#8237)
Summary: Don't call ```rocksdb_cache_disown_data()``` as it causes the memory allocated for ```shards_``` to be leaked. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8237 Reviewed By: jay-zhuang Differential Revision: D28039061 Pulled By: anand1976 fbshipit-source-id: c3464efe2c006b93b4be87030116a12a124598c4 |
4 years ago |
|
anand76
|
8fe33a0a9f |
Change CircleCI Windows to previous known good image (#8220)
Summary: This is to try to resolve the VS2015 install failure in CircleCI Windows builds. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8220 Reviewed By: jay-zhuang Differential Revision: D28061834 Pulled By: anand1976 fbshipit-source-id: b2663eb60babee603669a2c2cb55f182df1cc7b1 |
4 years ago |
|
sdong
|
cde69a7cfd |
db_stress to add --open_metadata_write_fault_one_in (#8235)
Summary: DB Stress to add --open_metadata_write_fault_one_in which would randomly fail in some file metadata modification operations during DB Open, including file creation, close, renaming and directory sync. Some operations can fail before and after the operations take place. If DB open fails, db_stress would retry without the failure ingestion, and DB is expected to open successfully. This option is enabled in crash test in half of the time. Some follow up changes would allow write failures in open time, and ingesting those failures in non-DB open cases. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8235 Test Plan: Run stress tests for a while and see failures got triggered. This can reproduce the bug fixed by https://github.com/facebook/rocksdb/pull/8192 and a similar one that fails when fsyncing parent directory. Reviewed By: anand1976 Differential Revision: D28010944 fbshipit-source-id: 36a96da4dc3633e5f7680cef3ea0a900fcdb5558 |
4 years ago |
|
Duarte Nunes
|
3949731de3 |
Add WAL flush API to C client (#8226)
Summary: The C client is missing the`manual_wal_flush` option and the `flush_wal` API. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8226 Reviewed By: ajkr Differential Revision: D28000869 Pulled By: jay-zhuang fbshipit-source-id: ed44937e7e7e75bc0dfa870a14147fbeef0c38f8 |
4 years ago |