Summary:
For half of the crash_test run, disable fail point for file appending, in order to trigger other fail point more frequently.
Also, tune crash test parameter a little bit for it to initialize faster.
Test Plan: Run crash_test and make sure it issues db_stress commands as expected.
Reviewers: yhchiang, igor, rven, anthony, IslamAbdelRahman, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48843
Summary: Mode of data sync off is a much less used than the case of data sync on. Crash test should cover the more common case than a corner case. So turn data sync on in crash tests.
Test Plan: Run crash test and make sure it can run with expected parameters pased to db_stres.
Reviewers: IslamAbdelRahman, anthony, igor, rven, kradhakrishnan, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48729
Summary:
Give a name for every kill point, and allow users to disable some kill points based on prefixes. The kill points can be passed by db_stress through a command line paramter. This provides a way for users to boost the chance of triggering low frequency kill points
This allow follow up changes in crash test scripts to improve crash test coverage.
Test Plan:
Manually run db_stress with variable values of --kill_random_test and --kill_prefix_blacklist. Like this:
--kill_random_test=2 --kill_prefix_blacklist=Posix,WritableFileWriter::Append,WritableFileWriter::WriteBuffered,WritableFileWriter::Sync
Reviewers: igor, kradhakrishnan, rven, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48735
Summary:
This patch will block all tests (not including db_test) that don't compile / fail under ROCKSDB_LITE
Test Plan:
OPT=-DROCKSDB_LITE make db_compaction_filter_test -j64 &&
OPT=-DROCKSDB_LITE make db_compaction_test -j64 &&
OPT=-DROCKSDB_LITE make db_dynamic_level_test -j64 &&
OPT=-DROCKSDB_LITE make db_log_iter_test -j64 &&
OPT=-DROCKSDB_LITE make db_tailing_iter_test -j64 &&
OPT=-DROCKSDB_LITE make db_universal_compaction_test -j64 &&
OPT=-DROCKSDB_LITE make ldb_cmd_test -j64
make clean
make db_compaction_filter_test -j64 &&
make db_compaction_test -j64 &&
make db_dynamic_level_test -j64 &&
make db_log_iter_test -j64 &&
make db_tailing_iter_test -j64 &&
make db_universal_compaction_test -j64 &&
make ldb_cmd_test -j64
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48723
Summary: As part of cleaning up dependencies for tech debt week, we are moving ldb and sst_dump tools from util to tools, since they are tools.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48747
Summary:
Refactor dump_tool and undump_tool so that it's possible to use them with customized options
for example setting a specific comparator similar to what Dragon is doing with the LdbTool
https://phabricator.fb.com/diffusion/FBCODE/browse/master/dragon/tools/Ldb.cpp
Test Plan:
compiles
used it to dump / undump a dragon shard
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, adsharma
Differential Revision: https://reviews.facebook.net/D47853
Summary:
Fixed the following tsan warning in db_stress.cc
WARNING: ThreadSanitizer: data race (pid=3163194)
Read of size 8 at 0x7fd1797cb518 by thread T32:
#0 VerifyDb tools/db_stress.cc:1731 (db_stress+0x000000040674)
#1 rocksdb::StressTest::ThreadBody(void*) tools/db_stress.cc:1191 (db_stress+0x0000000625a9)
#2 StartThreadWrapper util/env_posix.cc:1648 (db_stress+0x00000028bbbd)
Previous write of size 8 at 0x7fd1797cb518 by thread T31:
#0 VerifyDb tools/db_stress.cc:1726 (db_stress+0x00000004072a)
#1 rocksdb::StressTest::ThreadBody(void*) tools/db_stress.cc:1191 (db_stress+0x0000000625a9)
#2 StartThreadWrapper util/env_posix.cc:1648 (db_stress+0x00000028bbbd)
The cause is that in VerifyDb(), the static local const variable long max_key
can be read and written at the same time. This patch fixed it by making it
non-static.
Test Plan: db_stress
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47703
Summary:
This patch fixes#7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
Summary:
Added tests for two LDBCommands namely i) ManifestDumpCommand and ii) ListColumnFamiliesCommand.
+ Minor fix in the sscanf formatter (along relace C cast with C++ cast) + replacing localtime with localtime_r which is thread safe.
Test Plan: make all && ./tools/ldb_test.py
Reviewers: anthony, igor, IslamAbdelRahman, kradhakrishnan, lgalanis, rven, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45819
Summary: Add ZSTD compression type. The same way as adding LZ4.
Test Plan: run all tests. Generate files in db_bench. Make sure reads succeed. But the SST files cannot be opened in older versions. Also some other adhoc tests.
Reviewers: rven, anthony, IslamAbdelRahman, kradhakrishnan, igor
Reviewed By: igor
Subscribers: MarkCallaghan, maykov, yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45747
Summary:
db_bench output now displays Percentile many times with --statistics after
read IO latency histograms were added. So I only need the last one in the report output.
Task ID: #
Blame Rev:
Test Plan:
run run_flash_bench.sh
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D45093
Summary:
Up until this point we had DbOptions.num_subcompactions, but
it is semantically more correct to call this max_subcompactions since
we will schedule *up to* DbOptions.max_subcompactions smaller compactions
at a time during a compaction job.
I also added a --subcompactions option to db_bench
Test Plan: make all make check
Reviewers: sdong, igor, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D45069
Summary:
Changes include:
* don't sync-on-commit for single writer thread in readwhile... tests
* make default block size 8kb rather than 4kb to avoid too small blocks after compression
* use snappy instead of zlib to avoid stalls from compression latency
* disable statistics
* use bytes_per_sync=8M to reduce throughput loss on disk
* use open_files=-1 to reduce mutex contention
Task ID: #
Blame Rev:
Test Plan:
run benchmark
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D44961
Summary:
In prepration for running multiple threads at the same time during
a compaction job, this patch assigns each subcompaction its own state
(instead of sharing the one global CompactionState). Each subcompaction then
uses this state to update its statistics, keep track of its snapshots, etc.
during the course of execution. Then at the end of all the executions the
statistics are aggregated across the subcompactions so that the final result
is the same as if only one larger compaction had run.
Test Plan: ./db_test ./db_compaction_test ./compaction_job_test
Reviewers: sdong, anthony, igor, noetzli, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43239
Summary:
While working on single delete support for db_bench, I realized that
db_bench/db_stress contain a bunch of duplicate code related to
copmression and found some typos. This patch removes duplicate code,
typos and a redundant #ifndef in internal_stats.cc.
Test Plan: make db_stress && make db_bench && ./db_bench --benchmarks=compress,uncompress
Reviewers: yhchiang, sdong, rven, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43965
Summary: In a recent change, crash_test can put data under TEST_TMPDIR. However, the directory is not cleaned before running the test, which may cause unexpected results. Clean it.
Test Plan: Run white and black box crash test against non-existing, or non-empty but not compactible DBs, and make sure it works as expected.
Reviewers: kradhakrishnan, rven, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43515
Summary: Currently, whitebox crash test is not really executed, because the DB is destroyed after each crash. With this fix, in the first half of the time, DB will keep opening the crashed DB and continue from there.
Test Plan: "make whitebox_crash_test" and see the same DB keeps crashing and being reopened.
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43503
Summary: Currently crash_test only puts data under /tmp. It is less flexible if we want to cover different file systems or media. Make crash_test to appreciate TEST_TMPDIR so that users can run it against another file system.
Test Plan: Run blackbox_crash_test and whitebox_crash_test with or without TEST_TMPDIR set and make sure DBs are put in the right place
Reviewers: kradhakrishnan, yhchiang, rven, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43509
Summary:
crash_test now only runs complicated options, multiple column families, prefix hash, frequently changing options, many compaction threads, etc. These options are good to cover new features but we loss coverage in most common use cases. Furthermore, by running only for multiple column families, we are not able to create LSM trees that are large enough to cover some stress cases.
Make half of crash_test runs the simply tests: single column family, default mem table, one compaction thread, no change options.
Test Plan: Run crash_test
Reviewers: rven, yhchiang, IslamAbdelRahman, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43461
Summary:
Crash tests are supposed to restart the same DB after crashing, but it is now opening a different DB. Fix it.
It's probably a leftover of https://reviews.facebook.net/D17073
Test Plan: Run the test and make sure the same Db is opened.
Reviewers: kradhakrishnan, rven, igor, IslamAbdelRahman, yhchiang, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43197
Summary:
When we first started, max_background_flushes was 0 by default and compaction thread was executing flushes (since there was no flush thread). Then, we switched the default max_background_flushes to 1. However, we still support the case where there is no flush thread and flushes are done in compaction. This is making our code a bit more complicated. By not supporting this use-case we can make our code simpler.
We have a special case that when you set max_background_flushes to 0, we
schedule the flush to execute on the compaction thread.
Test Plan: make check (there might be some unit tests that depend on this behavior)
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41931
Summary: This is failing our tsan tests. Our new behavior is to fail DB::Open() if the requested compression is not available. The easiest fix is to make ldb_test not depend on compression.
Test Plan: python tools/ldb_test.py
Reviewers: sdong, yhchiang, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42075
Summary: This option is guarding the feature implemented 2 and a half years ago: D8991. The feature was enabled by default back then and has been running without issues. There is no reason why any client would turn this feature off. I found no reference in fbcode.
Test Plan: none
Reviewers: sdong, yhchiang, anthony, dhruba
Reviewed By: dhruba
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42063
Summary: Block reduce_levels_test in ROCKSDB_LITE as LDBCommand is not supported
Test Plan:
make reduce_levels_test -j64
OPT=-DROCKSDB_LITE make reduce_levels_test -j64
make check -j64
Reviewers: sdong, igor, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D41967
Summary: This helps Windows port to format their changes, as discussed. Might have formatted some other codes too becasue last 10 commits include more.
Test Plan: Build it.
Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D41961
Summary: Make RocksDb build and run on Windows to be functionally
complete and performant. All existing test cases run with no
regressions. Performance numbers are in the pull-request.
Test plan: make all of the existing unit tests pass, obtain perf numbers.
Co-authored-by: Praveen Rao praveensinghrao@outlook.com
Co-authored-by: Sherlock Huang baihan.huang@gmail.com
Co-authored-by: Alex Zinoviev alexander.zinoviev@me.com
Co-authored-by: Dmitri Smirnov dmitrism@microsoft.com
Summary: Hack up rocksdb_dump and rocksdb_undump utilities to get this task rolling/promote discussion.
Test Plan: Dump/undump databases recursively to see if nothing is lost.
Reviewers: sdong, yhchiang, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37269
Summary:
EventListener::OnFlushCompleted() now passes a structure instead
of a list of parameters. This minimizes the API change in the
future.
Test Plan:
listener_test
compact_files_test
example/compact_files_example
Reviewers: kradhakrishnan, sdong, IslamAbdelRahman, rven, igor
Reviewed By: rven, igor
Subscribers: IslamAbdelRahman, rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39543
Summary:
Add EventListener::OnTableFileCreated(), which will be called
when a table file is created. This patch is part of the
EventLogger and EventListener integration.
Test Plan: Augment existing test in db/listener_test.cc
Reviewers: anthony, kradhakrishnan, rven, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38865
Summary:
Fixed db_stress by correcting the verification of column family
names in the Listener of db_stress
Test Plan: db_stress
Reviewers: igor, sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39255
Summary: Fixed a compile warning in db_stress in NDEBUG mode.
Test Plan: make OPT=-DNDEBUG db_stress
Reviewers: sdong, anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39213
Summary: Optimistic transactions supporting begin/commit/rollback semantics. Currently relies on checking the memtable to determine if there are any collisions at commit time. Not yet implemented would be a way of enuring the memtable has some minimum amount of history so that we won't fail to commit when the memtable is empty. You should probably start with transaction.h to get an overview of what is currently supported.
Test Plan: Added a new test, but still need to look into stress testing.
Reviewers: yhchiang, igor, rven, sdong
Reviewed By: sdong
Subscribers: adamretter, MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D33435
Summary:
Fixed the following compile warning in db_stress:
error: 'OnCompactionCompleted' overrides a member function but is not marked 'override' [-Werror,-Winconsistent-missing-override]
Test Plan: make db_stress
Reviewers: sdong, igor, anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39207
Summary:
For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit.
After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much.
This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit).
However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions.
Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here.
Reviewers: sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37443
Summary:
This runs a benchmark for LevelDB similar to what we have
in tools/run_flash_bench.sh. It requires changes to db_bench that I published
in a LevelDB fork on github. Some results are at:
http://smalldatum.blogspot.com/2015/04/comparing-leveldb-and-rocksdb-take-2.html
Sample output:
ops/sec mb/sec usec/op avg p50 Test
525 16.4 1904.5 1904.5 111.0 fillseq.v32768
75187 15.5 13.3 13.3 4.4 fillseq.v200
28328 5.8 35.3 35.3 4.7 overwrite.t1.s0
175438 0.0 5.7 5.7 4.4 readrandom.t1
28490 5.9 35.1 35.1 4.7 overwrite.t1.s0
121951 0.0 8.2 8.2 5.7 readwhilewriting.t1
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37749
Summary:
This is done to avoid having each thread use the same seed between runs
of db_bench. Without this we can inflate the OS filesystem cache hit rate on
reads for read heavy tests and generally see the same key sequences get generated
between teste runs.
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37563
Summary:
This adds:
1) use of --level_compaction_dynamic_level_bytes=true
2) use of --bytes_per_sync=2M
The second is a big win for disks. The first helps in general.
This also adds a new test, fillseq with 32kb values to increase the peak
ingest and make it more likely that storage limits throughput.
Sample outpout from the first 3 tests - https://gist.github.com/mdcallag/e793bd3038e367b05d6f
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37509
Summary:
This changes loads to use vector memtable and disable the WAL. This also
increases the chance we will see IO bottlenecks during loads which is good to stress
test HW. But I also think it is a good way to load data quickly as this is a bulk
operation and the WAL isn't needed.
The two numbers below are the MB/sec rates for fillseq, bulkload using a skiplist
or vector memtable and the WAL enabled or disabled. There is a big benefit from
using the vector memtable and WAL disabled. Alas there is also a perf bug in
the use of std::sort for ordered input when the vector is flushed. Task is open
for that.
112, 66 - skiplist with wal
250, 116 - skiplist without wal
110, 108 - vector with wal
232, 370 - vector without wal
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36957
Summary: Add a script, which checks out changes from a list of tags, build them and load the same data into it. In the last, checkout the target build and make sure it can successfully open DB and read all the data. It is implemented through ldb tool, because ldb tool is available from all previous builds so that we don't have to cross build anything.
Test Plan: Run the script.
Reviewers: yhchiang, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36639
Summary:
This adds p99.9 and p99.99 response times to the benchmark report and
adds a second report, report2.txt that has tests listed in test order rather
than the time in which they were run, so overwrite tests are listed for
all thread counts, then update etc.
Also changes fillseq to compress all levels to avoid write-amp from rewriting
uncompressed files when they reach the first level to compress.
Increase max_write_buffer_number to avoid stalls during fillseq and make
max_background_flushes agree with max_write_buffer_number.
See https://gist.github.com/mdcallag/297ff4316a25cb2988f7 for an example
of the new report (report2.txt)
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36537
sdong