Summary:
Call `SyncClosedLogs()` only if there are more than one column families.
Update several unit tests (in `fault_injection_test` and `db_flush_test`) correspondingly.
See #3840 for more info.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4460
Differential Revision: D12896377
Pulled By: riversand963
fbshipit-source-id: f49afdaec32568f12f001219a3aec1dfde3b32bf
Summary:
`CompactFiles` gets `SuperVersion` before `WaitForIngestFile`, while `IngestExternalFile` may add files that overlap with `input_file_names`
The timeline of execution flow is as follow:
Let's say that level N has two file [1,2] and [5,6]
```
timeline user_thread1 user_thread2
t0 | CompactFiles([1, 2], [5, 6]) begin
t1 | GetReferencedSuperVersion()
t2 | IngestExternalFile([3,4]) to level N begin
t3 | CompactFiles resume
V
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4665
Differential Revision: D13030674
Pulled By: ajkr
fbshipit-source-id: 8be19477fd6e505032267a979d32f3097cc3be51
Summary:
In the past, both `DBImpl::atomic_flush_` and
`DBImpl::immutable_db_options_.atomic_flush` exist. However, we fail to set
`immutable_db_options_.atomic_flush`, but use `DBImpl::atomic_flush_` which is
set correctly. This does not lead to incorrect behavior, but is a duplicate of
information.
Since `immutable_db_options_` is always there and has `atomic_flush`, we should
use it as source of truth and remove `DBImpl::atomic_flush_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4631
Differential Revision: D12928371
Pulled By: riversand963
fbshipit-source-id: f85a811959d3828aad4a3a1b05f71facf19c636d
Summary:
The flakyness can be reproduced with the following patch:
```
--- a/db/db_impl_compaction_flush.cc
+++ b/db/db_impl_compaction_flush.cc
@@ -2013,6 +2013,9 @@ void DBImpl::BackgroundCallFlush() {
if (job_context.HaveSomethingToDelete()) {
PurgeObsoleteFiles(job_context);
}
+ static int f_count = 0;
+ printf("clean flush job context %d\n", ++f_count);
+ env_->SleepForMicroseconds(1000000);
job_context.Clean();
mutex_.Lock();
}
```
The issue is that FlushMemtable with opt.wait=true does not wait for `OnStallConditionsChanged` being called. The event listener is triggered on `JobContext::Clean`, which happens after flush result is installed. At the time we check for stall condition after flushing memtable, the job context cleanup may not be finished.
To fix the flaykyness, we use sync point to create a custom WaitForFlush that waits for context cleanup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4658
Differential Revision: D13007301
Pulled By: yiwu-arbug
fbshipit-source-id: d98395ee7b0ad4c62e83e8d0e9b6028058c61712
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
The logic to wait for stall conditions to clear before beginning a manual flush didn't take into account whether the DB was in read-only mode. In read-only mode the stall conditions would never clear since no background work is happening, so the wait would be never-ending. It's probably better to return an error to the user.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4615
Differential Revision: D12888008
Pulled By: ajkr
fbshipit-source-id: 1c474b42a7ac38d9fd0d0e2340ff1d53e684d83c
Summary:
A background compaction with pre-picked files (i.e., either a manual compaction or a bottom-pri compaction) fails when the DB is in read-only mode. In the failure handling, we forgot to unregister the compaction and the files it covered. Then subsequent manual compactions could conflict with this zombie compaction (possibly Halloween related) and wait forever for it to finish.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4611
Differential Revision: D12871217
Pulled By: ajkr
fbshipit-source-id: 9d24e921d5bbd2ee8c2c9536a30abfa42a220c6e
Summary:
Leverage existing `FlushJob` to implement atomic flush of multiple column families.
This PR depends on other PRs and is a subset of #3752 . This PR itself is not sufficient in fulfilling atomic flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4262
Differential Revision: D9283109
Pulled By: riversand963
fbshipit-source-id: 65401f913e4160b0a61c0be6cd02adc15dad28ed
Summary:
fix#4288
Add `OnCompactionBegin` support to `rocksdb::EventListener`.
Currently, we only have these three callbacks:
- OnFlushBegin
- OnFlushCompleted
- OnCompactionCompleted
As paolococchi requested in #4288 , and ajkr agreed, we should also support `OnCompactionBegin`.
This PR is a try to implement the support of `OnCompactionBegin`.
Hope it is useful to you.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4431
Differential Revision: D10055515
Pulled By: yiwu-arbug
fbshipit-source-id: 39c0f95f8e9ff1c7ca3a10787502a17f258d2334
Summary:
this avoids a few copies of std::string and other structs
in the context of range-based for loops. instead of copying
the values for each iteration, use a const reference to avoid
copying.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4459
Differential Revision: D10282045
Pulled By: sagar0
fbshipit-source-id: 5012e910dca279abd2be847e1fb432d96274edfb
Summary:
Currently statistics are supposed to be dumped to info log at intervals of `options.stats_dump_period_sec`. However the implementation choice was to bind it with compaction thread, meaning if the database has been serving very light traffic, the stats may not get dumped at all.
We decided to separate stats dumping into a new timed thread using `TimerQueue`, which is already used in blob_db. This will allow us schedule new timed tasks with more deterministic behavior.
Tested with db_bench using `--stats_dump_period_sec=20` in command line:
> LOG:2018/09/17-14:07:45.575025 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
LOG:2018/09/17-14:08:05.643286 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
LOG:2018/09/17-14:08:25.691325 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
LOG:2018/09/17-14:08:45.740989 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
LOG content:
> 2018/09/17-14:07:45.575025 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
2018/09/17-14:07:45.575080 7fe99fbfe700 [WARN] [db/db_impl.cc:606]
** DB Stats **
Uptime(secs): 20.0 total, 20.0 interval
Cumulative writes: 4447K writes, 4447K keys, 4447K commit groups, 1.0 writes per commit group, ingest: 5.57 GB, 285.01 MB/s
Cumulative WAL: 4447K writes, 0 syncs, 4447638.00 writes per sync, written: 5.57 GB, 285.01 MB/s
Cumulative stall: 00:00:0.012 H:M:S, 0.1 percent
Interval writes: 4447K writes, 4447K keys, 4447K commit groups, 1.0 writes per commit group, ingest: 5700.71 MB, 285.01 MB/s
Interval WAL: 4447K writes, 0 syncs, 4447638.00 writes per sync, written: 5.57 MB, 285.01 MB/s
Interval stall: 00:00:0.012 H:M:S, 0.1 percent
** Compaction Stats [default] **
Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4382
Differential Revision: D9933051
Pulled By: miasantreble
fbshipit-source-id: 6d12bb1e4977674eea4bf2d2ac6d486b814bb2fa
Summary:
The controller you requested could not be found. PTAL
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4466
Differential Revision: D10241358
Pulled By: yiwu-arbug
fbshipit-source-id: 99664eb286860a6c8844d50efeb0ef6f0e10dd1e
Summary:
This commit implements automatic recovery from a Status::NoSpace() error
during background operations such as write callback, flush and
compaction. The broad design is as follows -
1. Compaction errors are treated as soft errors and don't put the
database in read-only mode. A compaction is delayed until enough free
disk space is available to accomodate the compaction outputs, which is
estimated based on the input size. This means that users can continue to
write, and we rely on the WriteController to delay or stop writes if the
compaction debt becomes too high due to persistent low disk space
condition
2. Errors during write callback and flush are treated as hard errors,
i.e the database is put in read-only mode and goes back to read-write
only fater certain recovery actions are taken.
3. Both types of recovery rely on the SstFileManagerImpl to poll for
sufficient disk space. We assume that there is a 1-1 mapping between an
SFM and the underlying OS storage container. For cases where multiple
DBs are hosted on a single storage container, the user is expected to
allocate a single SFM instance and use the same one for all the DBs. If
no SFM is specified by the user, DBImpl::Open() will allocate one, but
this will be one per DB and each DB will recover independently. The
recovery implemented by SFM is as follows -
a) On the first occurance of an out of space error during compaction,
subsequent
compactions will be delayed until the disk free space check indicates
enough available space. The required space is computed as the sum of
input sizes.
b) The free space check requirement will be removed once the amount of
free space is greater than the size reserved by in progress
compactions when the first error occured
c) If the out of space error is a hard error, a background thread in
SFM will poll for sufficient headroom before triggering the recovery
of the database and putting it in write-only mode. The headroom is
calculated as the sum of the write_buffer_size of all the DB instances
associated with the SFM
4. EventListener callbacks will be called at the start and completion of
automatic recovery. Users can disable the auto recov ery in the start
callback, and later initiate it manually by calling DB::Resume()
Todo:
1. More extensive testing
2. Add disk full condition to db_stress (follow-on PR)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4164
Differential Revision: D9846378
Pulled By: anand1976
fbshipit-source-id: 80ea875dbd7f00205e19c82215ff6e37da10da4a
Summary:
Basically at the moment it seems it's possible to cause write stall by calling flush (either manually vis DB::Flush(), or from Backup Engine directly calling FlushMemTable() while background flush may be already happening.
One of the ways to fix it is that in DBImpl::CompactRange() we already check for possible stall and delay flush if needed before we actually proceed to call FlushMemTable(). We can simply move this delay logic to separate method and call it from FlushMemTable.
This is draft patch, for first look; need to check tests/update SyncPoints and most certainly would need to add allow_write_stall method to FlushOptions().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4297
Differential Revision: D9420705
Pulled By: mikhail-antonov
fbshipit-source-id: f81d206b55e1d7b39e4dc64242fdfbceeea03fcc
Summary:
RocksDB currently queues individual column family for flushing. This is not sufficient to support the needs of some applications that want to enforce order/dependency between column families, given that multiple foreground and background activities can trigger flushing in RocksDB.
This PR aims to address this limitation. Each flush request is described as a `FlushRequest` that can contain multiple column families. A background flushing thread pops one flush request from the queue at a time and processes it.
This PR does not enable atomic_flush yet, but is a subset of [PR 3752](https://github.com/facebook/rocksdb/pull/3752).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3952
Differential Revision: D8529933
Pulled By: riversand963
fbshipit-source-id: 78908a21e389a3a3f7de2a79bae0cd13af5f3539
Summary:
In the past, we assume that a job modifies a single column family. Therefore, a job can create at most one superversion since each superversion corresponds to one column family. This assumption leads to the fact that a `JobContext` has only one member variable called `superversion_context`.
Now we want to support group flush of column families, indicating that each job can create multiple superversions. Therefore, we need to make the following change to accommodate this new feature.
Add a vector of `SuperVersionContext` to `JobContext` to support installing
superversions for multiple column families in one job context.
This PR is a subset of [PR 3752](https://github.com/facebook/rocksdb/pull/3752).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3949
Differential Revision: D8864895
Pulled By: riversand963
fbshipit-source-id: 5937a48817276370d3c8172db9c8aafc826d97ca
Summary:
RocksDB used to store global_seqno in external SST files written by
SstFileWriter. During file ingestion, RocksDB uses `pwrite` to update the
`global_seqno`. Since random write is not supported in some non-POSIX compliant
file systems, external SST file ingestion is not supported on these file
systems. To address this limitation, we no longer update `global_seqno` during
file ingestion. Later RocksDB uses the MANIFEST and other information in table
properties to deduce global seqno for externally-ingested SST files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4172
Differential Revision: D8961465
Pulled By: riversand963
fbshipit-source-id: 4382ec85270a96be5bc0cf33758ca2b167b05071
Summary:
If crash happen after a hard link established, Recover function may reuse the file number that has already assigned to the internal file, and this will overwrite the external file. To protect the external file, we have to make sure the file number will never being reused.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4099
Differential Revision: D9034092
Pulled By: riversand963
fbshipit-source-id: 3f1a737440b86aa2ef01673e5013aacbb7c33e28
Summary:
Currently, if RocksDB encounters errors during a write operation (user requested or BG operations), it sets DBImpl::bg_error_ and fails subsequent writes. This PR allows the DB to be resumed for certain classes of errors. It consists of 3 parts -
1. Introduce Status::Severity in rocksdb::Status to indicate whether a given error can be recovered from or not
2. Refactor the error handling code so that setting bg_error_ and deciding on severity is in one place
3. Provide an API for the user to clear the error and resume the DB instance
This whole change is broken up into multiple PRs. Initially, we only allow clearing the error for Status::NoSpace() errors during background flush/compaction. Subsequent PRs will expand this to include more errors and foreground operations such as Put(), and implement a polling mechanism for out-of-space errors.
Closes https://github.com/facebook/rocksdb/pull/3997
Differential Revision: D8653831
Pulled By: anand1976
fbshipit-source-id: 6dc835c76122443a7668497c0226b4f072bc6afd
Summary:
This feature was introduced for universal compaction in cc01985d. At that point we thought it'd be used only to prevent long-running universal full compactions from blocking short-lived upper-level compactions. Now we have a level compaction user who could benefit from it since they use more expensive compression algorithm in the bottom level. So enable it for level.
Closes https://github.com/facebook/rocksdb/pull/3835
Differential Revision: D7957179
Pulled By: ajkr
fbshipit-source-id: 177285d2cef3b650b6a4d81dc5db84bc441c9fe4
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
Summary:
Sometimes we want to compact files as fast as possible, but don't want to set a large `max_subcompactions` in the `DBOptions` by default.
I add a `max_subcompactions` options to `CompactionOptions` so that we can choose a proper concurrency dynamically.
Closes https://github.com/facebook/rocksdb/pull/3775
Differential Revision: D7792357
Pulled By: ajkr
fbshipit-source-id: 94f54c3784dce69e40a229721a79a97e80cd6a6c
Summary:
We use `queued_for_flush_` to indicate a column family has been added to the
flush queue. Similarly and to be consistent in our naming, we need to use `queued_for_compaction_` to indicate a column family has been added to the compaction queue. In the past we used
`pending_compaction_` which can also be ambiguous.
Closes https://github.com/facebook/rocksdb/pull/3781
Differential Revision: D7790063
Pulled By: riversand963
fbshipit-source-id: 6786b11a4fcaea36dc9b4672233dbe042f921804
Summary:
With ColumnFamilyData::pending_flush_, we have the following code snippet in DBImpl::ScheedulePendingFlush
```
if (!cfd->pending_flush() && cfd->imm()->IsFlushPending()) {
...
}
```
`Pending` is ambiguous, and I feel `queued_for_flush` is a better name,
especially for the sake of readability.
Closes https://github.com/facebook/rocksdb/pull/3777
Differential Revision: D7783066
Pulled By: riversand963
fbshipit-source-id: f1bd8c8bfe5eafd2c94da0d8566c9b2b6bb57229
Summary:
sync parent directory after deleting a file in delete scheduler. Otherwise, trim speed may not be as smooth as what we want.
Closes https://github.com/facebook/rocksdb/pull/3767
Differential Revision: D7760136
Pulled By: siying
fbshipit-source-id: ec131d53b61953f09c60d67e901e5eeb2716b05f
Summary:
Right now in `SyncClosedLogs`, `CopyFile`, and `AddRecord`, where `Sync` and `Append` are invoked in a loop, the error status are not checked. This could lead to potential corruption as later calls will overwrite the error status.
Closes https://github.com/facebook/rocksdb/pull/3740
Differential Revision: D7678848
Pulled By: miasantreble
fbshipit-source-id: 4b0b412975989dfe80348f73217b9c4122a4bd77
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662
Differential Revision: D7426121
Pulled By: Dayvedde
fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
Summary:
1. Remove redundant text.
2. Make terminology consistent across all comments and doc of RocksDB. Also do
our best to conform to conventions. Specifically, use 'callback' instead of
'call-back' [wikipedia](https://en.wikipedia.org/wiki/Callback_(computer_programming)).
Closes https://github.com/facebook/rocksdb/pull/3693
Differential Revision: D7560396
Pulled By: riversand963
fbshipit-source-id: ba8c251c487f4e7d1872a1a8dc680f9e35a6ffb8
Summary:
In this change, an option to set different paths for different column families is added.
This option is set via cf_paths setting of ColumnFamilyOptions. This option will work in a similar fashion to db_paths setting. Cf_paths is a vector of Dbpath values which contains a pair of the absolute path and target size. Multiple levels in a Column family can go to different paths if cf_paths has more than one path.
To maintain backward compatibility, if cf_paths is not specified for a column family, db_paths setting will be used. Note that, if db_paths setting is also not specified, RocksDB already has code to use db_name as the only path.
Changes :
1) A new member "cf_paths" is added to ImmutableCfOptions. This is set, based on cf_paths setting of ColumnFamilyOptions and db_paths setting of ImmutableDbOptions. This member is used to identify the path information whenever files are accessed.
2) Validation checks are added for cf_paths setting based on existing checks for db_paths setting.
3) DestroyDB, PurgeObsoleteFiles etc. are edited to support multiple cf_paths.
4) Unit tests are added appropriately.
Closes https://github.com/facebook/rocksdb/pull/3102
Differential Revision: D6951697
Pulled By: ajkr
fbshipit-source-id: 60d2262862b0a8fd6605b09ccb0da32bb331787d
Summary:
Manual compactions should be cancelled, just like scheduled compactions are cancelled, if sfm->EnoughRoomForCompaction is not true.
Closes https://github.com/facebook/rocksdb/pull/3670
Differential Revision: D7457683
Pulled By: amytai
fbshipit-source-id: 669b02fdb707f75db576d03d2c818fb98d1876f5
Summary:
Possible interleaved execution of background compaction thread calling `FindObsoleteFiles (no full scan) / PurgeObsoleteFiles` and user thread calling `FindObsoleteFiles (full scan) / PurgeObsoleteFiles` can lead to race condition on which RocksDB attempts to delete a file twice. The second attempt will fail and return `IO error`. This may occur to other files, but this PR targets sst.
Also add a unit test to verify that this PR fixes the issue.
The newly added unit test `obsolete_files_test` has a test case for this scenario, implemented in `ObsoleteFilesTest#RaceForObsoleteFileDeletion`. `TestSyncPoint`s are used to coordinate the interleaving the `user_thread` and background compaction thread. They execute as follows
```
timeline user_thread background_compaction thread
t1 | FindObsoleteFiles(full_scan=false)
t2 | FindObsoleteFiles(full_scan=true)
t3 | PurgeObsoleteFiles
t4 | PurgeObsoleteFiles
V
```
When `user_thread` invokes `FindObsoleteFiles` with full scan, it collects ALL files in RocksDB directory, including the ones that background compaction thread have collected in its job context. Then `user_thread` will see an IO error when trying to delete these files in `PurgeObsoleteFiles` because background compaction thread has already deleted the file in `PurgeObsoleteFiles`.
To fix this, we make RocksDB remember which (SST) files have been found by threads after calling `FindObsoleteFiles` (see `DBImpl#files_grabbed_for_purge_`). Therefore, when another thread calls `FindObsoleteFiles` with full scan, it will not collect such files.
ajkr could you take a look and comment? Thanks!
Closes https://github.com/facebook/rocksdb/pull/3638
Differential Revision: D7384372
Pulled By: riversand963
fbshipit-source-id: 01489516d60012e722ee65a80e1449e589ce26d3
Summary:
Currently AddPrepared is performed only on the first sub-batch if there are duplicate keys in the write batch. This could cause a problem if the transaction takes too long to commit and the seq number of the first sub-patch moved to old_prepared_ but not the seq of the later ones. The patch fixes this by calling AddPrepared for all sub-patches.
Closes https://github.com/facebook/rocksdb/pull/3651
Differential Revision: D7388635
Pulled By: maysamyabandeh
fbshipit-source-id: 0ccd80c150d9bc42fe955e49ddb9d7ca353067b4
Summary:
This is a small API extension to allow the CompactFiles method to return the names of files that were created during the compaction.
Closes https://github.com/facebook/rocksdb/pull/3608
Differential Revision: D7275789
Pulled By: siying
fbshipit-source-id: 1ec0c3954a0f10cd877efb5f29f9be6c7b59e9ba
Summary:
Added a stat that counts the number of cancelled compactions.
Closes https://github.com/facebook/rocksdb/pull/3574
Differential Revision: D7190259
Pulled By: amytai
fbshipit-source-id: d5ce82dc9398da6d6d34023ad4ed8cec909852a3
Summary:
This diff handles cases where compaction causes an ENOSPC error.
This does not handle corner cases where another background job is started while compaction is running, and the other background job triggers ENOSPC, although we do allow the user to provision for these background jobs with SstFileManager::SetCompactionBufferSize.
It also does not handle the case where compaction has finished and some other background job independently triggers ENOSPC.
Usage: Functionality is inside SstFileManager. In particular, users should set SstFileManager::SetMaxAllowedSpaceUsage, which is the reference highwatermark for determining whether to cancel compactions.
Closes https://github.com/facebook/rocksdb/pull/3449
Differential Revision: D7016941
Pulled By: amytai
fbshipit-source-id: 8965ab8dd8b00972e771637a41b4e6c645450445
Summary:
CompactRange has a call to Flush because we guarantee that, at the time it's called, all existing keys in the range will be pushed through the user's compaction filter. However, previously the flush was done blindly, so it'd happen even if the memtable does not contain keys in the range specified by the user. This caused unnecessarily many L0 files to be created, leading to write stalls in some cases. This PR checks the memtable's contents, and decides to flush only if it overlaps with `CompactRange`'s range.
- Move the memtable overlap check logic from `ExternalSstFileIngestionJob` to `ColumnFamilyData::RangesOverlapWithMemtables`
- Reuse the above logic in `CompactRange` and skip flushing if no overlap
Closes https://github.com/facebook/rocksdb/pull/3520
Differential Revision: D7018897
Pulled By: ajkr
fbshipit-source-id: a3c6b1cfae56687b49dd89ccac7c948e53545934
Summary:
- Refactored logic for checking write stall condition to a helper function: `GetWriteStallConditionAndCause`. Now it is decoupled from the logic for updating WriteController / stats in `RecalculateWriteStallConditions`, so we can reuse it for predicting whether write stall will occur.
- Updated `CompactRange` to first check whether the one additional immutable memtable / L0 file would cause stalling before it flushes. If so, it waits until that is no longer true.
- Updated `bg_cv_` to be signaled on `SetOptions` calls. The stall conditions `CompactRange` cares about can change when (1) flush finishes, (2) compaction finishes, or (3) options dynamically change. The cv was already signaled for (1) and (2) but not yet for (3).
Closes https://github.com/facebook/rocksdb/pull/3381
Differential Revision: D6754983
Pulled By: ajkr
fbshipit-source-id: 5613e03f1524df7192dc6ae885d40fd8f091d972
Summary:
It's always a mystery from the logs why flush was triggered -- user triggered it manually, WriteBufferManager triggered it, logs were full, write buffer was full, etc.
This PR logs Flush reason whenever a flush is scheduled.
Closes https://github.com/facebook/rocksdb/pull/3401
Differential Revision: D6788142
Pulled By: miasantreble
fbshipit-source-id: a867e54d493c06adf5172bd36a180fb3faae3511
Summary:
In the test, there can be a dead lock between background flush thread and foreground main thread as following:
* background flush thread:
- holding db mutex, while
- waiting on "DBImpl::FlushMemTableToOutputFile:BeforeInstallSV" sync point.
* foreground thread:
- waiting for db mutex to write "key2"
Fixing by let background flush thread wait without holding db mutex.
Closes https://github.com/facebook/rocksdb/pull/3436
Differential Revision: D6841334
Pulled By: yiwu-arbug
fbshipit-source-id: b020768ac94e166e40953c5d09e505515a5f244d
Summary:
Flush() call could be waiting indefinitely if min_write_buffer_number_to_merge is used. Consider the sequence:
1. User call Flush() with flush_options.wait = true
2. The manual flush started in the background
3. New memtable become immutable because of writes. The new memtable will not trigger flush if min_write_buffer_number_to_merge is not reached.
4. The manual flush finish.
Because of the new memtable created at step 3 not being flush, previous logic of WaitForFlushMemTable() keep waiting, despite the memtables it intent to flush has been flushed.
Here instead of checking if there are any more memtables to flush, WaitForFlushMemTable() also check the id of the earliest memtable. If the id is larger than that of latest memtable at the time flush was initiated, it means all the memtable at the time of flush start has all been flush.
Closes https://github.com/facebook/rocksdb/pull/3378
Differential Revision: D6746789
Pulled By: yiwu-arbug
fbshipit-source-id: 35e698f71c7f90b06337a93e6825f4ea3b619bfa
Summary:
When calling `DisableFileDeletions` followed by `GetSortedWalFiles`, we guarantee the files returned by the latter call won't be deleted until after file deletions are re-enabled. However, `GetSortedWalFiles` didn't omit files already planned for deletion via `PurgeObsoleteFiles`, so the guarantee could be broken.
We fix it by making `GetSortedWalFiles` wait for the number of pending purges to hit zero if file deletions are disabled. This condition is eventually met since `PurgeObsoleteFiles` is guaranteed to be called for the existing pending purges, and new purges cannot be scheduled while file deletions are disabled. Once the condition is met, `GetSortedWalFiles` simply returns the content of DB and archive directories, which nobody can delete (except for deletion scheduler, for which I plan to fix this bug later) until deletions are re-enabled.
Closes https://github.com/facebook/rocksdb/pull/3341
Differential Revision: D6681131
Pulled By: ajkr
fbshipit-source-id: 90b1e2f2362ea9ef715623841c0826611a817634
Summary:
After af92d4ad11, only exclusive manual compaction can have conflict. dc360df81e updated the conflict-checking test case accordingly. But we missed the point that exclusive manual compaction can only conflict with automatic compactions scheduled after it, since it waits on pending automatic compactions before it begins running.
This PR updates the test case to ensure the automatic compactions are scheduled after the manual compaction starts but before it finishes, thus ensuring a conflict. I also cleaned up the test case to use less space as I saw it cause out-of-space error on travis.
Closes https://github.com/facebook/rocksdb/pull/3375
Differential Revision: D6735162
Pulled By: ajkr
fbshipit-source-id: 020530a4e150a4786792dce7cec5d66b420cb884
Summary:
If there's manual compaction in the queue, then "HaveManualCompaction(compaction_queue_.front())" will return true, and this cause too frequent MaybeScheduleFlushOrCompaction().
https://github.com/facebook/rocksdb/issues/3198
Closes https://github.com/facebook/rocksdb/pull/3366
Differential Revision: D6729575
Pulled By: ajkr
fbshipit-source-id: 96da04f8fd33297b1ccaec3badd9090403da29b0
Soli