Tag:
Branch:
Tree:
5cbee1f609
main
oxigraph-8.1.1
oxigraph-8.3.2
oxigraph-main
${ noResults }
1279 Commits (5cbee1f6097a93214e37c1bce0a796ae96825401)
| Author | SHA1 | Message | Date |
|---|---|---|---|
Yanqin Jin
|
d739de63e5 |
Fix a bug in WAL tracking (#10087)
Summary: Closing https://github.com/facebook/rocksdb/issues/10080 When `SyncWAL()` calls `MarkLogsSynced()`, even if there is only one active WAL file, this event should still be added to the MANIFEST. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10087 Test Plan: make check Reviewed By: ajkr Differential Revision: D36797580 Pulled By: riversand963 fbshipit-source-id: 24184c9dd606b3939a454ed41de6e868d1519999 |
2 years ago |
|
Gang Liao
|
e6432dfd4c |
Make it possible to enable blob files starting from a certain LSM tree level (#10077)
Summary: Currently, if blob files are enabled (i.e. `enable_blob_files` is true), large values are extracted both during flush/recovery (when SST files are written into level 0 of the LSM tree) and during compaction into any LSM tree level. For certain use cases that have a mix of short-lived and long-lived values, it might make sense to support extracting large values only during compactions whose output level is greater than or equal to a specified LSM tree level (e.g. compactions into L1/L2/... or above). This could reduce the space amplification caused by large values that are turned into garbage shortly after being written at the price of some write amplification incurred by long-lived values whose extraction to blob files is delayed. In order to achieve this, we would like to do the following: - Add a new configuration option `blob_file_starting_level` (default: 0) to `AdvancedColumnFamilyOptions` (and `MutableCFOptions` and extend the related logic) - Instantiate `BlobFileBuilder` in `BuildTable` (used during flush and recovery, where the LSM tree level is L0) and `CompactionJob` iff `enable_blob_files` is set and the LSM tree level is `>= blob_file_starting_level` - Add unit tests for the new functionality, and add the new option to our stress tests (`db_stress` and `db_crashtest.py` ) - Add the new option to our benchmarking tool `db_bench` and the BlobDB benchmark script `run_blob_bench.sh` - Add the new option to the `ldb` tool (see https://github.com/facebook/rocksdb/wiki/Administration-and-Data-Access-Tool) - Ideally extend the C and Java bindings with the new option - Update the BlobDB wiki to document the new option. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10077 Reviewed By: ltamasi Differential Revision: D36884156 Pulled By: gangliao fbshipit-source-id: 942bab025f04633edca8564ed64791cb5e31627d |
2 years ago |
|
Gang Liao
|
3dc6ebaf74 |
Support specifying blob garbage collection parameters when CompactRange() (#10073)
Summary: Garbage collection is generally controlled by the BlobDB configuration options `enable_blob_garbage_collection` and `blob_garbage_collection_age_cutoff`. However, there might be use cases where we would want to temporarily override these options while performing a manual compaction. (One use case would be doing a full key-space manual compaction with full=100% garbage collection age cutoff in order to minimize the space occupied by the database.) Our goal here is to make it possible to override the configured GC parameters when using the `CompactRange` API to perform manual compactions. This PR would involve: - Extending the `CompactRangeOptions` structure so clients can both force-enable and force-disable GC, as well as use a different cutoff than what's currently configured - Storing whether blob GC should actually be enabled during a certain manual compaction and the cutoff to use in the `Compaction` object (considering the above overrides) and passing it to `CompactionIterator` via `CompactionProxy` - Updating the BlobDB wiki to document the new options. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10073 Test Plan: Adding unit tests and adding the new options to the stress test tool. Reviewed By: ltamasi Differential Revision: D36848700 Pulled By: gangliao fbshipit-source-id: c878ef101d1c612429999f513453c319f75d78e9 |
2 years ago |
|
Akanksha Mahajan
|
45b1c788c4 |
Update History.md for #9922 (#10092)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10092 Reviewed By: riversand963 Differential Revision: D36832311 Pulled By: akankshamahajan15 fbshipit-source-id: 8fb1cf90b1d4dddebbfbeebeddb15f6905968e9b |
2 years ago |
|
Jay Zhuang
|
5864900cf4 |
Get current LogFileNumberSize the same as log_writer (#10086)
Summary: `db_impl.alive_log_files_` is used to track the WAL size in `db_impl.logs_`. Get the `LogFileNumberSize` obj in `alive_log_files_` the same time as `log_writer` to keep them consistent. For this issue, it's not safe to do `deque::reverse_iterator::operator*` and `deque::pop_front()` concurrently, so remove the tail cache. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10086 Test Plan: ``` # on Windows gtest-parallel ./db_test --gtest_filter=DBTest.FileCreationRandomFailure -r 1000 -w 100 ``` Reviewed By: riversand963 Differential Revision: D36822373 Pulled By: jay-zhuang fbshipit-source-id: 5e738051dfc7bcf6a15d85ba25e6365df6b6a6af |
2 years ago |
|
Changyu Bi
|
463873f1bb |
Add bug fix to HISTORY.md (#10091)
Summary: Add to HISTORY.md the bug fixed in https://github.com/facebook/rocksdb/issues/10051 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10091 Reviewed By: ajkr Differential Revision: D36821861 Pulled By: cbi42 fbshipit-source-id: 598812fab88f65c0147ece53cff55cf4ea73aac6 |
2 years ago |
|
Peter Dillinger
|
a00cffaf69 |
Reduce risk of backup or checkpoint missing a WAL file (#10083)
Summary: We recently saw a case in crash test in which a WAL file in the middle of the list of live WALs was not included in the backup, so the DB was not openable due to missing WAL. We are not sure why, but this change should at least turn that into a backup-time failure by ensuring all the WAL files expected by the manifest (according to VersionSet) are included in `GetSortedWalFiles()` (used by `GetLiveFilesStorageInfo()`, `BackupEngine`, and `Checkpoint`) Related: to maximize the effectiveness of track_and_verify_wals_in_manifest with GetSortedWalFiles() during checkpoint/backup, we will now sync WAL in GetLiveFilesStorageInfo() when track_and_verify_wals_in_manifest=true. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10083 Test Plan: added new unit test for the check in GetSortedWalFiles() Reviewed By: ajkr Differential Revision: D36791608 Pulled By: pdillinger fbshipit-source-id: a27bcf0213fc7ab177760fede50d4375d579afa6 |
2 years ago |
|
Yanqin Jin
|
514f0b0937 |
Fail DB::Open() if logger cannot be created (#9984)
Summary:
For regular db instance and secondary instance, we return error and refuse to open DB if Logger creation fails.
Our current code allows it, but it is really difficult to debug because
there will be no LOG files. The same for OPTIONS file, which will be explored in another PR.
Furthermore, Arena::AllocateAligned(size_t bytes, size_t huge_page_size, Logger* logger) has an
assertion as the following:
```cpp
#ifdef MAP_HUGETLB
if (huge_page_size > 0 && bytes > 0) {
assert(logger != nullptr);
}
#endif
```
It can be removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9984
Test Plan: make check
Reviewed By: jay-zhuang
Differential Revision: D36347754
Pulled By: riversand963
fbshipit-source-id: 529798c0511d2eaa2f0fd40cf7e61c4cbc6bc57e
|
2 years ago |
|
Muthu Krishnan
|
c9c58a320f |
Add C API for User Defined Timestamp (#9914)
Summary: Fixes https://github.com/facebook/rocksdb/issues/9889 Pull Request resolved: https://github.com/facebook/rocksdb/pull/9914 Reviewed By: akankshamahajan15 Differential Revision: D36599983 Pulled By: riversand963 fbshipit-source-id: 39000fb473f850d88359e90b287035257854af0d |
2 years ago |
|
Akanksha Mahajan
|
28ea1fb44a |
Provide support for IOTracing for ReadAsync API (#9833)
Summary: Same as title Pull Request resolved: https://github.com/facebook/rocksdb/pull/9833 Test Plan: Add unit test and manually check the output of tracing logs For fixed readahead_size it logs as: ``` Access Time : 193352113447923 , File Name: 000026.sst , File Operation: ReadAsync , Latency: 15075 , IO Status: OK, Length: 12288, Offset: 659456 Access Time : 193352113465232 , File Name: 000026.sst , File Operation: ReadAsync , Latency: 14425 , IO Status: OK, Length: 12288, Offset: 671744 Access Time : 193352113481539 , File Name: 000026.sst , File Operation: ReadAsync , Latency: 13062 , IO Status: OK, Length: 12288, Offset: 684032 Access Time : 193352113497692 , File Name: 000026.sst , File Operation: ReadAsync , Latency: 13649 , IO Status: OK, Length: 12288, Offset: 696320 Access Time : 193352113520043 , File Name: 000026.sst , File Operation: ReadAsync , Latency: 19384 , IO Status: OK, Length: 12288, Offset: 708608 Access Time : 193352113538401 , File Name: 000026.sst , File Operation: ReadAsync , Latency: 15406 , IO Status: OK, Length: 12288, Offset: 720896 Access Time : 193352113554855 , File Name: 000026.sst , File Operation: ReadAsync , Latency: 13670 , IO Status: OK, Length: 12288, Offset: 733184 Access Time : 193352113571624 , File Name: 000026.sst , File Operation: ReadAsync , Latency: 13855 , IO Status: OK, Length: 12288, Offset: 745472 Access Time : 193352113587924 , File Name: 000026.sst , File Operation: ReadAsync , Latency: 13953 , IO Status: OK, Length: 12288, Offset: 757760 Access Time : 193352113603285 , File Name: 000026.sst , File Operation: Prefetch , Latency: 59 , IO Status: Not implemented: Prefetch not supported, Length: 8868, Offset: 898349 ``` For implicit readahead: ``` Access Time : 193351865156587 , File Name: 000026.sst , File Operation: Prefetch , Latency: 48 , IO Status: Not implemented: Prefetch not supported, Length: 12266, Offset: 391174 Access Time : 193351865160354 , File Name: 000026.sst , File Operation: Prefetch , Latency: 51 , IO Status: Not implemented: Prefetch not supported, Length: 12266, Offset: 395248 Access Time : 193351865164253 , File Name: 000026.sst , File Operation: Prefetch , Latency: 49 , IO Status: Not implemented: Prefetch not supported, Length: 12266, Offset: 399322 Access Time : 193351865165461 , File Name: 000026.sst , File Operation: ReadAsync , Latency: 222871 , IO Status: OK, Length: 135168, Offset: 401408 ``` Reviewed By: anand1976 Differential Revision: D35601634 Pulled By: akankshamahajan15 fbshipit-source-id: 5a4f32a850af878efa0767bd5706380152a1f26e |
2 years ago |
|
sdong
|
356f8c5d81 |
FindObsoleteFiles() to directly check whether candidate files are live (#10040)
Summary: Right now, in FindObsoleteFiles() we build a list of all live SST files from all existing Versions. This is all done in DB mutex, and is O(m*n) where m is number of versions and n is number of files. In some extereme cases, it can take very long. The list is used to see whether a candidate file still shows up in a version. With this commit, every candidate file is directly check against all the versions for file existance. This operation would be O(m*k) where k is number of candidate files. Since is usually small (except perhaps full compaction in universal compaction), this is usually much faster than the previous solution. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10040 Test Plan: TBD Reviewed By: riversand963 Differential Revision: D36613391 fbshipit-source-id: 3f13b090f755d9b3ae417faec62cd6e798bac1eb |
2 years ago |
|
Yiyuan Liu
|
b71466e982 |
Improve transaction C-API (#9252)
Summary: This PR wants to improve support for transaction in C-API: * Support two-phase commit. * Support `get_pinned` and `multi_get` in transaction. * Add `rocksdb_transactiondb_flush` * Support get writebatch from transaction and rebuild transaction from writebatch. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9252 Reviewed By: jay-zhuang Differential Revision: D36459007 Pulled By: riversand963 fbshipit-source-id: 47371d527be821c496353a7fe2fd18d628069a98 |
2 years ago |
|
sdong
|
c78a87cd71 |
Avoid malloc_usable_size() call inside LRU Cache mutex (#10026)
Summary: In LRU Cache mutex, we sometimes call malloc_usable_size() to calculate memory used by the metadata object. We prevent it by saving the charge + metadata size, rather than charge, inside the metadata itself. Within the mutex, usually only total charge is needed so we don't need to repeat. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10026 Test Plan: Run existing tests. Reviewed By: pdillinger Differential Revision: D36556253 fbshipit-source-id: f60c96d13cde3af77732e5548e4eac4182fa9801 |
2 years ago |
|
Yu Zhang
|
d4081bf0be |
Add timestamp support to CompactedDBImpl (#10030)
Summary: This PR is the second and last part for adding user defined timestamp support to read only DB. Specifically, the change in this PR includes: - `options.timestamp` respected by `CompactedDBImpl::Get` and `CompactedDBImpl::MultiGet` to return results visible up till that timestamp. - `CompactedDBImpl::Get(...,std::string* timestsamp)` and `CompactedDBImpl::MultiGet(std::vector<std::string>* timestamps)` return the timestamp(s) associated with the key(s). Pull Request resolved: https://github.com/facebook/rocksdb/pull/10030 Test Plan: ``` $COMPILE_WITH_ASAN=1 make -j24 all $./db_readonly_with_timestamp_test --gtest_filter="DBReadOnlyTestWithTimestamp.CompactedDB*" $./db_basic_test --gtest_filter="DBBasicTest.CompactedDB*" $make all check ``` Reviewed By: riversand963 Differential Revision: D36613926 Pulled By: jowlyzhang fbshipit-source-id: 5b7ed7fef822708c12e2caf7a8d2deb6a696f0f0 |
2 years ago |
|
Akanksha Mahajan
|
700d597bd8 |
Expose unix time in rocksdb::Snapshot (#9923)
Summary: RocksDB snapshot already has a member unix_time_ set after snapshot is taken. It is now exposed through GetSnapshotTime() API. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9923 Test Plan: Update unit tests Reviewed By: riversand963 Differential Revision: D36048275 Pulled By: akankshamahajan15 fbshipit-source-id: 825210ec287deb0bc3aaa9b8e1f079f07ad686fa |
2 years ago |
|
Levi Tamasi
|
253ae017fa |
Update version on main to 7.4 and add 7.3 to the format compatibility checks (#10038)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10038 Reviewed By: riversand963 Differential Revision: D36604533 Pulled By: ltamasi fbshipit-source-id: 54ccd0a4b32a320b5640a658ea6846ee897065d1 |
2 years ago |
|
Levi Tamasi
|
bed40e7266 |
Update HISTORY for 7.3 release (#10031)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10031 Reviewed By: riversand963 Differential Revision: D36567741 Pulled By: ltamasi fbshipit-source-id: 058f8cc856d276db6e1aed07a89ac0b7118c4435 |
2 years ago |
|
Akanksha Mahajan
|
2db6a4a1d6 |
Seek parallelization (#9994)
Summary: The RocksDB iterator is a hierarchy of iterators. MergingIterator maintains a heap of LevelIterators, one for each L0 file and for each non-zero level. The Seek() operation naturally lends itself to parallelization, as it involves positioning every LevelIterator on the correct data block in the correct SST file. It lookups a level for a target key, to find the first key that's >= the target key. This typically involves reading one data block that is likely to contain the target key, and scan forward to find the first valid key. The forward scan may read more data blocks. In order to find the right data block, the iterator may read some metadata blocks (required for opening a file and searching the index). This flow can be parallelized. Design: Seek will be called two times under async_io option. First seek will send asynchronous request to prefetch the data blocks at each level and second seek will follow the normal flow and in FilePrefetchBuffer::TryReadFromCacheAsync it will wait for the Poll() to get the results and add the iterator to min_heap. - Status::TryAgain is passed down from FilePrefetchBuffer::PrefetchAsync to block_iter_.Status indicating asynchronous request has been submitted. - If for some reason asynchronous request returns error in submitting the request, it will fallback to sequential reading of blocks in one pass. - If the data already exists in prefetch_buffer, it will return the data without prefetching further and it will be treated as single pass of seek. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9994 Test Plan: - **Run Regressions.** ``` ./db_bench -db=/tmp/prefix_scan_prefetch_main -benchmarks="fillseq" -key_size=32 -value_size=512 -num=5000000 -use_direct_io_for_flush_and_compaction=true -target_file_size_base=16777216 ``` i) Previous release 7.0 run for normal prefetching with async_io disabled: ``` ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 7.0 Date: Thu Mar 17 13:11:34 2022 CPU: 24 * Intel Core Processor (Broadwell) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 5000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 2594.0 MB (estimated) FileSize: 1373.3 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_main] seekrandom : 483618.390 micros/op 2 ops/sec; 338.9 MB/s (249 of 249 found) ``` ii) normal prefetching after changes with async_io disable: ``` ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 Set seed to 1652922591315307 because --seed was 0 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 7.3 Date: Wed May 18 18:09:51 2022 CPU: 32 * Intel Xeon Processor (Skylake) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 5000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 2594.0 MB (estimated) FileSize: 1373.3 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_main] seekrandom : 483080.466 micros/op 2 ops/sec 120.287 seconds 249 operations; 340.8 MB/s (249 of 249 found) ``` iii) db_bench with async_io enabled completed succesfully ``` ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 -async_io=1 -adaptive_readahead=1 Set seed to 1652924062021732 because --seed was 0 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 7.3 Date: Wed May 18 18:34:22 2022 CPU: 32 * Intel Xeon Processor (Skylake) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 5000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 2594.0 MB (estimated) FileSize: 1373.3 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_main] seekrandom : 553913.576 micros/op 1 ops/sec 120.199 seconds 217 operations; 293.6 MB/s (217 of 217 found) ``` - db_stress with async_io disabled completed succesfully ``` export CRASH_TEST_EXT_ARGS=" --async_io=0" make crash_test -j ``` I**n Progress**: db_stress with async_io is failing and working on debugging/fixing it. Reviewed By: anand1976 Differential Revision: D36459323 Pulled By: akankshamahajan15 fbshipit-source-id: abb1cd944abe712bae3986ae5b16704b3338917c |
2 years ago |
|
Changyu Bi
|
cc23b46da1 |
Support using ZDICT_finalizeDictionary to generate zstd dictionary (#9857)
Summary:
An untrained dictionary is currently simply the concatenation of several samples. The ZSTD API, ZDICT_finalizeDictionary(), can improve such a dictionary's effectiveness at low cost. This PR changes how dictionary is created by calling the ZSTD ZDICT_finalizeDictionary() API instead of creating raw content dictionary (when max_dict_buffer_bytes > 0), and pass in all buffered uncompressed data blocks as samples.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9857
Test Plan:
#### db_bench test for cpu/memory of compression+decompression and space saving on synthetic data:
Set up: change the parameter [here](
|
2 years ago |
|
anand76
|
57997ddaaf |
Multi file concurrency in MultiGet using coroutines and async IO (#9968)
Summary: This PR implements a coroutine version of batched MultiGet in order to concurrently read from multiple SST files in a level using async IO, thus reducing the latency of the MultiGet. The API from the user perspective is still synchronous and single threaded, with the RocksDB part of the processing happening in the context of the caller's thread. In Version::MultiGet, the decision is made whether to call synchronous or coroutine code. A good way to review this PR is to review the first 4 commits in order - de773b3, 70c2f70, 10b50e1, and 377a597 - before reviewing the rest. TODO: 1. Figure out how to build it in CircleCI (requires some dependencies to be installed) 2. Do some stress testing with coroutines enabled No regression in synchronous MultiGet between this branch and main - ``` ./db_bench -use_existing_db=true --db=/data/mysql/rocksdb/prefix_scan -benchmarks="readseq,multireadrandom" -key_size=32 -value_size=512 -num=5000000 -batch_size=64 -multiread_batched=true -use_direct_reads=false -duration=60 -ops_between_duration_checks=1 -readonly=true -adaptive_readahead=true -threads=16 -cache_size=10485760000 -async_io=false -multiread_stride=40000 -statistics ``` Branch - ```multireadrandom : 4.025 micros/op 3975111 ops/sec 60.001 seconds 238509056 operations; 2062.3 MB/s (14767808 of 14767808 found)``` Main - ```multireadrandom : 3.987 micros/op 4013216 ops/sec 60.001 seconds 240795392 operations; 2082.1 MB/s (15231040 of 15231040 found)``` More benchmarks in various scenarios are given below. The measurements were taken with ```async_io=false``` (no coroutines) and ```async_io=true``` (use coroutines). For an IO bound workload (with every key requiring an IO), the coroutines version shows a clear benefit, being ~2.6X faster. For CPU bound workloads, the coroutines version has ~6-15% higher CPU utilization, depending on how many keys overlap an SST file. 1. Single thread IO bound workload on remote storage with sparse MultiGet batch keys (~1 key overlap/file) - No coroutines - ```multireadrandom : 831.774 micros/op 1202 ops/sec 60.001 seconds 72136 operations; 0.6 MB/s (72136 of 72136 found)``` Using coroutines - ```multireadrandom : 318.742 micros/op 3137 ops/sec 60.003 seconds 188248 operations; 1.6 MB/s (188248 of 188248 found)``` 2. Single thread CPU bound workload (all data cached) with ~1 key overlap/file - No coroutines - ```multireadrandom : 4.127 micros/op 242322 ops/sec 60.000 seconds 14539384 operations; 125.7 MB/s (14539384 of 14539384 found)``` Using coroutines - ```multireadrandom : 4.741 micros/op 210935 ops/sec 60.000 seconds 12656176 operations; 109.4 MB/s (12656176 of 12656176 found)``` 3. Single thread CPU bound workload with ~2 key overlap/file - No coroutines - ```multireadrandom : 3.717 micros/op 269000 ops/sec 60.000 seconds 16140024 operations; 139.6 MB/s (16140024 of 16140024 found)``` Using coroutines - ```multireadrandom : 4.146 micros/op 241204 ops/sec 60.000 seconds 14472296 operations; 125.1 MB/s (14472296 of 14472296 found)``` 4. CPU bound multi-threaded (16 threads) with ~4 key overlap/file - No coroutines - ```multireadrandom : 4.534 micros/op 3528792 ops/sec 60.000 seconds 211728728 operations; 1830.7 MB/s (12737024 of 12737024 found) ``` Using coroutines - ```multireadrandom : 4.872 micros/op 3283812 ops/sec 60.000 seconds 197030096 operations; 1703.6 MB/s (12548032 of 12548032 found) ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9968 Reviewed By: akankshamahajan15 Differential Revision: D36348563 Pulled By: anand1976 fbshipit-source-id: c0ce85a505fd26ebfbb09786cbd7f25202038696 |
2 years ago |
|
Bo Wang
|
5be1579ead |
Address comments for PR #9988 and #9996 (#10020)
Summary: 1. The latest change of DecideRateLimiterPriority in https://github.com/facebook/rocksdb/pull/9988 is reverted. 2. For https://github.com/facebook/rocksdb/blob/main/db/builder.cc#L345-L349 2.1. Remove `we will regrad this verification as user reads` from the comments. 2.2. `Do not set` the read_options.rate_limiter_priority to Env::IO_USER . Flush should be a background job. 2.3. Update db_rate_limiter_test.cc. 3. In IOOptions, mark `prio` as deprecated for future removal. 4. In `file_system.h`, mark `IOPriority` as deprecated for future removal. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10020 Test Plan: Unit tests. Reviewed By: ajkr Differential Revision: D36525317 Pulled By: gitbw95 fbshipit-source-id: 011ba421822f8a124e6d25a2661c4e242df6ad36 |
2 years ago |
|
Jay Zhuang
|
c6d326d3d7 |
Track SST unique id in MANIFEST and verify (#9990)
Summary: Start tracking SST unique id in MANIFEST, which is used to verify with SST properties to make sure the SST file is not overwritten or misplaced. A DB option `try_verify_sst_unique_id` is introduced to enable/disable the verification, if enabled, it opens all SST files during DB-open to read the unique_id from table properties (default is false), so it's recommended to use it with `max_open_files = -1` to pre-open the files. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9990 Test Plan: unittests, format-compatible test, mini-crash Reviewed By: anand1976 Differential Revision: D36381863 Pulled By: jay-zhuang fbshipit-source-id: 89ea2eb6b35ed3e80ead9c724eb096083eaba63f |
2 years ago |
|
gitbw95
|
4da34b97ee |
Set Read rate limiter priority dynamically and pass it to FS (#9996)
Summary: ### Context: Background compactions and flush generate large reads and writes, and can be long running, especially for universal compaction. In some cases, this can impact foreground reads and writes by users. ### Solution User, Flush, and Compaction reads share some code path. For this task, we update the rate_limiter_priority in ReadOptions for code paths (e.g. FindTable (mainly in BlockBasedTable::Open()) and various iterators), and eventually update the rate_limiter_priority in IOOptions for FSRandomAccessFile. **This PR is for the Read path.** The **Read:** dynamic priority for different state are listed as follows: | State | Normal | Delayed | Stalled | | ----- | ------ | ------- | ------- | | Flush (verification read in BuildTable()) | IO_USER | IO_USER | IO_USER | | Compaction | IO_LOW | IO_USER | IO_USER | | User | User provided | User provided | User provided | We will respect the read_options that the user provided and will not set it. The only sst read for Flush is the verification read in BuildTable(). It claims to be "regard as user read". **Details** 1. Set read_options.rate_limiter_priority dynamically: - User: Do not update the read_options. Use the read_options that the user provided. - Compaction: Update read_options in CompactionJob::ProcessKeyValueCompaction(). - Flush: Update read_options in BuildTable(). 2. Pass the rate limiter priority to FSRandomAccessFile functions: - After calling the FindTable(), read_options is passed through GetTableReader(table_cache.cc), BlockBasedTableFactory::NewTableReader(block_based_table_factory.cc), and BlockBasedTable::Open(). The Open() needs some updates for the ReadOptions variable and the updates are also needed for the called functions, including PrefetchTail(), PrepareIOOptions(), ReadFooterFromFile(), ReadMetaIndexblock(), ReadPropertiesBlock(), PrefetchIndexAndFilterBlocks(), and ReadRangeDelBlock(). - In RandomAccessFileReader, the functions to be updated include Read(), MultiRead(), ReadAsync(), and Prefetch(). - Update the downstream functions of NewIndexIterator(), NewDataBlockIterator(), and BlockBasedTableIterator(). ### Test Plans Add unit tests. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9996 Reviewed By: anand1976 Differential Revision: D36452483 Pulled By: gitbw95 fbshipit-source-id: 60978204a4f849bb9261cb78d9bc1cb56d6008cf |
2 years ago |
|
gitbw95
|
05c678e135 |
Set Write rate limiter priority dynamically and pass it to FS (#9988)
Summary: ### Context: Background compactions and flush generate large reads and writes, and can be long running, especially for universal compaction. In some cases, this can impact foreground reads and writes by users. From the RocksDB perspective, there can be two kinds of rate limiters, the internal (native) one and the external one. - The internal (native) rate limiter is introduced in [the wiki](https://github.com/facebook/rocksdb/wiki/Rate-Limiter). Currently, only IO_LOW and IO_HIGH are used and they are set statically. - For the external rate limiter, in FSWritableFile functions, IOOptions is open for end users to set and get rate_limiter_priority for their own rate limiter. Currently, RocksDB doesn’t pass the rate_limiter_priority through IOOptions to the file system. ### Solution During the User Read, Flush write, Compaction read/write, the WriteController is used to determine whether DB writes are stalled or slowed down. The rate limiter priority (Env::IOPriority) can be determined accordingly. We decided to always pass the priority in IOOptions. What the file system does with it should be a contract between the user and the file system. We would like to set the rate limiter priority at file level, since the Flush/Compaction job level may be too coarse with multiple files and block IO level is too granular. **This PR is for the Write path.** The **Write:** dynamic priority for different state are listed as follows: | State | Normal | Delayed | Stalled | | ----- | ------ | ------- | ------- | | Flush | IO_HIGH | IO_USER | IO_USER | | Compaction | IO_LOW | IO_USER | IO_USER | Flush and Compaction writes share the same call path through BlockBaseTableWriter, WritableFileWriter, and FSWritableFile. When a new FSWritableFile object is created, its io_priority_ can be set dynamically based on the state of the WriteController. In WritableFileWriter, before the call sites of FSWritableFile functions, WritableFileWriter::DecideRateLimiterPriority() determines the rate_limiter_priority. The options (IOOptions) argument of FSWritableFile functions will be updated with the rate_limiter_priority. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9988 Test Plan: Add unit tests. Reviewed By: anand1976 Differential Revision: D36395159 Pulled By: gitbw95 fbshipit-source-id: a7c82fc29759139a1a07ec46c37dbf7e753474cf |
2 years ago |
|
Jay Zhuang
|
b84e3363f5 |
Add table_properties_collector_factories override (#9995)
Summary: Add table_properties_collector_factories override on the remote side. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9995 Test Plan: unittest added Reviewed By: ajkr Differential Revision: D36392623 Pulled By: jay-zhuang fbshipit-source-id: 3ba031294d90247ca063d7de7b43178d38e3f66a |
2 years ago |
|
Peter Dillinger
|
0070680cfd |
Adjust public APIs to prefer 128-bit SST unique ID (#10009)
Summary: 128 bits should suffice almost always and for tracking in manifest. Note that this changes the output of sst_dump --show_properties to only show 128 bits. Also introduces InternalUniqueIdToHumanString for presenting internal IDs for debugging purposes. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10009 Test Plan: unit tests updated Reviewed By: jay-zhuang Differential Revision: D36458189 Pulled By: pdillinger fbshipit-source-id: 93ebc4a3b6f9c73ee154383a1f8b291a5d6bbef5 |
2 years ago |
|
Hui Xiao
|
3573558ec5 |
Rewrite memory-charging feature's option API (#9926)
Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af |
2 years ago |
|
Yanqin Jin
|
3f263ef536 |
Add a temporary option for user to opt-out enforcement of SingleDelete contract (#9983)
Summary: PR https://github.com/facebook/rocksdb/issues/9888 started to enforce the contract of single delete described in https://github.com/facebook/rocksdb/wiki/Single-Delete. For some of existing use cases, it is desirable to have a transition during which compaction will not fail if the contract is violated. Therefore, we add a temporary option `enforce_single_del_contracts` to allow application to opt out from this new strict behavior. Once transition completes, the flag can be set to `true` again. In a future release, the option will be removed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9983 Test Plan: make check Reviewed By: ajkr Differential Revision: D36333672 Pulled By: riversand963 fbshipit-source-id: dcb703ea0ed08076a1422f1bfb9914afe3c2caa2 |
2 years ago |
|
sdong
|
c4cd8e1acc |
Fix a bug handling multiget index I/O error. (#9993)
Summary: In one path of BlockBasedTable::MultiGet(), Next() is directly called after calling Seek() against the index iterator. This might cause crash if an I/O error happens in Seek(). The bug is discovered in crash test. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9993 Test Plan: See existing CI tests pass. Reviewed By: anand1976 Differential Revision: D36381758 fbshipit-source-id: a11e0aa48dcee168c2554c33b532646ffdb68877 |
2 years ago |
|
mrambacher
|
bfc6a8ee4a |
Option type info functions (#9411)
Summary: Add methods to set the various functions (Parse, Serialize, Equals) to the OptionTypeInfo. These methods simplify the number of constructors required for OptionTypeInfo and make the code a little clearer. Add functions to the OptionTypeInfo for Prepare and Validate. These methods allow types other than Configurable and Customizable to have Prepare and Validate logic. These methods could be used by an option to guarantee that its settings were in a range or that a value was initialized. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9411 Reviewed By: pdillinger Differential Revision: D36174849 Pulled By: mrambacher fbshipit-source-id: 72517d8c6bab4723788a4c1a9e16590bff870125 |
2 years ago |
|
Yanqin Jin
|
9d634dd5b6 |
Rename kRemoveWithSingleDelete to kPurge (#9951)
Summary: PR 9929 adds a new CompactionFilter::Decision, i.e. kRemoveWithSingleDelete so that CompactionFilter can indicate to CompactionIterator that a PUT can only be removed with SD. However, how CompactionIterator handles such a key is implementation detail which should not be implied in the public API. In fact, such a PUT can just be dropped. This is an optimization which we will apply in the near future. Discussion thread: https://github.com/facebook/rocksdb/pull/9929#discussion_r863198964 Pull Request resolved: https://github.com/facebook/rocksdb/pull/9951 Test Plan: make check Reviewed By: ajkr Differential Revision: D36156590 Pulled By: riversand963 fbshipit-source-id: 7b7d01f47bba4cad7d9cca6ca52984f27f88b372 |
2 years ago |
|
Jay Zhuang
|
270179bb12 |
Default `try_load_options` to true when DB is specified (#9937)
Summary: If the DB path is specified, the user would expect ldb loads the options from the path, but it's not: ``` $ ldb list_live_files_metadata --db=`pwd` ``` Default `try_load_options` to true in that case. The user can still disable that by: ``` $ ldb list_live_files_metadata --db=`pwd` --try_load_options=false ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9937 Test Plan: `ldb list_live_files_metadata --db=`pwd`` is able to work for a db generated with different options.num_levels. Reviewed By: ajkr Differential Revision: D36106708 Pulled By: jay-zhuang fbshipit-source-id: 2732fdc027a4d172436b2c9b6a9787b56b10c710 |
2 years ago |
|
Yanqin Jin
|
06394ff4e7 |
Fix a bug of CompactionIterator/CompactionFilter using `Delete` (#9929)
Summary: When compaction filter determines that a key should be removed, it updates the internal key's type to `Delete`. If this internal key is preserved in current compaction but seen by a later compaction together with `SingleDelete`, it will cause compaction iterator to return Corruption. To fix the issue, compaction filter should return more information in addition to the intention of removing a key. Therefore, we add a new `kRemoveWithSingleDelete` to `CompactionFilter::Decision`. Seeing `kRemoveWithSingleDelete`, compaction iterator will update the op type of the internal key to `kTypeSingleDelete`. In addition, I updated db_stress_shared_state.[cc|h] so that `no_overwrite_ids_` becomes `const`. It is easier to reason about thread-safety if accessed from multiple threads. This information is passed to `PrepareTxnDBOptions()` when calling from `Open()` so that we can set up the rollback deletion type callback for transactions. Finally, disable compaction filter for multiops_txn because the key removal logic of `DbStressCompactionFilter` does not quite work with `MultiOpsTxnsStressTest`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9929 Test Plan: make check make crash_test make crash_test_with_txn Reviewed By: anand1976 Differential Revision: D36069678 Pulled By: riversand963 fbshipit-source-id: cedd2f1ba958af59ad3916f1ba6f424307955f92 |
2 years ago |
|
Yanqin Jin
|
2b5c29f9f3 |
Enforce the contract of SingleDelete (#9888)
Summary: Enforce the contract of SingleDelete so that they are not mixed with Delete for the same key. Otherwise, it will lead to undefined behavior. See https://github.com/facebook/rocksdb/wiki/Single-Delete#notes. Also fix unit tests and write-unprepared. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9888 Test Plan: make check Reviewed By: ajkr Differential Revision: D35837817 Pulled By: riversand963 fbshipit-source-id: acd06e4dcba8cb18df92b44ed18c57e10e5a7635 |
2 years ago |
|
Akanksha Mahajan
|
fce65e7e4f |
Fix bug in async_io path which reads incorrect length (#9916)
Summary: In FilePrefetchBuffer, in case data is overlapping between two buffers and more data is required to read and copy that to third buffer, incorrect length was updated resulting in ``` Iterator diverged from control iterator which has value 00000000000310C3000000000000012B0000000000000274 total_order_seek: 1 auto_prefix_mode: 0 S 000000000002C37F000000000000012B000000000000001C NNNPPPPPNN; total_order_seek: 1 auto_prefix_mode: 0 S 000000000002F10B00000000000000BF78787878787878 NNNPNNNNPN; total_order_seek: 1 auto_prefix_mode: 0 S 00000000000310C3000000000000012B000000000000026B iterator is not valid Control CF default db_stress: db_stress_tool/db_stress_test_base.cc:1388: void rocksdb::StressTest::VerifyIterator(rocksdb::ThreadState*, rocksdb::ColumnFamilyHandle*, const rocksdb::ReadOptions&, rocksdb::Iterator*, rocksdb::Iterator*, rocksdb::StressTest::LastIterateOp, const rocksdb::Slice&, const string&, bool*): Assertion `false' failed. Aborted (core dumped) ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9916 Test Plan: ``` - CircleCI jobs - Ran db_stress with OPTIONS file which caught the bug ./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=0 --async_io=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=1 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=42.26248932628998 --bottommost_compression_type=disable --cache_index_and_filter_blocks=0 --cache_size=8388608 --checkpoint_one_in=0 --checksum_type=kxxHash --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_ttl=0 --compression_max_dict_buffer_bytes=1073741823 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=zstd --compression_zstd_max_train_bytes=65536 --continuous_verification_interval=0 --db=/dev/shm/rocksdb/ --db_write_buffer_size=134217728 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=0 --enable_blob_files=0 --enable_compaction_filter=0 --enable_pipelined_write=0 --fail_if_options_file_error=0 --file_checksum_impl=none --flush_one_in=1000000 --format_version=4 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=12 --index_type=2 --ingest_external_file_one_in=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --long_running_snapshots=0 --mark_for_compaction_one_file_in=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=25000000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=1048576 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=8388608 --memtable_prefix_bloom_size_ratio=0.001 --memtable_whole_key_filtering=1 --memtablerep=skip_list --mmap_read=0 --mock_direct_io=False --nooverwritepercent=1 --open_files=100 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=16 --ops_per_thread=100000000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=1 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=-1 --prefixpercent=0 --prepopulate_block_cache=0 --progress_reports=0 --read_fault_one_in=0 --read_only=0 --readpercent=50 --recycle_log_file_num=1 --reopen=0 --reserve_table_reader_memory=0 --ribbon_starting_level=999 --secondary_cache_fault_one_in=0 --secondary_catch_up_one_in=0 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=0 --subcompactions=2 --sync=0 --sync_fault_injection=False --target_file_size_base=2097152 --target_file_size_multiplier=2 --test_batches_snapshots=0 --test_cf_consistency=0 --top_level_index_pinning=3 --unpartitioned_pinning=3 --use_blob_db=0 --use_block_based_filter=0 --use_clock_cache=0 --use_direct_io_for_flush_and_compaction=1 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 --use_multiget=0 --use_txn=0 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --wal_compression=zstd --write_buffer_size=4194304 --write_dbid_to_manifest=0 --writepercent=35 --options_file=/home/akankshamahajan/OPTIONS.orig -column_families=1 db_bench with async_io enabled to make sure db_bench completes successfully without any failure. - ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 -async_io=1 ``` crash_test in progress Reviewed By: anand1976 Differential Revision: D35985789 Pulled By: akankshamahajan15 fbshipit-source-id: 5abe185f34caa99ca587d4bdc8954bd0802b1bf9 |
2 years ago |
|
Peter Dillinger
|
9d0cae7104 |
Eliminate unnecessary (slow) block cache Ref()ing in MultiGet (#9899)
Summary: When MultiGet() determines that multiple query keys can be served by examining the same data block in block cache (one Lookup()), each PinnableSlice referring to data in that data block needs to hold on to the block in cache so that they can be released at arbitrary times by the API user. Historically this is accomplished with extra calls to Ref() on the Handle from Lookup(), with each PinnableSlice cleanup calling Release() on the Handle, but this creates extra contention on the block cache for the extra Ref()s and Release()es, especially because they hit the same cache shard repeatedly. In the case of merge operands (possibly more cases?), the problem was compounded by doing an extra Ref()+eventual Release() for each merge operand for a key reusing a block (which could be the same key!), rather than one Ref() per key. (Note: the non-shared case with `biter` was already one per key.) This change optimizes MultiGet not to rely on these extra, contentious Ref()+Release() calls by instead, in the shared block case, wrapping the cache Release() cleanup in a refcounted object referenced by the PinnableSlices, such that after the last wrapped reference is released, the cache entry is Release()ed. Relaxed atomic refcounts should be much faster than mutex-guarded Ref() and Release(), and much less prone to a performance cliff when MultiGet() does a lot of block sharing. Note that I did not use std::shared_ptr, because that would require an extra indirection object (shared_ptr itself new/delete) in order to associate a ref increment/decrement with a Cleanable cleanup entry. (If I assumed it was the size of two pointers, I could do some hackery to make it work without the extra indirection, but that's too fragile.) Some details: * Fixed (removed) extra block cache tracing entries in cases of cache entry reuse in MultiGet, but it's likely that in some other cases traces are missing (XXX comment inserted) * Moved existing implementations for cleanable.h from iterator.cc to new cleanable.cc * Improved API comments on Cleanable * Added a public SharedCleanablePtr class to cleanable.h in case others could benefit from the same pattern (potentially many Cleanables and/or smart pointers referencing a shared Cleanable) * Add a typedef for MultiGetContext::Mask * Some variable renaming for clarity Pull Request resolved: https://github.com/facebook/rocksdb/pull/9899 Test Plan: Added unit tests for SharedCleanablePtr. Greatly enhanced ability of existing tests to detect cache use-after-free. * Release PinnableSlices from MultiGet as they are read rather than in bulk (in db_test_util wrapper). * In ASAN build, default to using a trivially small LRUCache for block_cache so that entries are immediately erased when unreferenced. (Updated two tests that depend on caching.) New ASAN testsuite running time seems OK to me. If I introduce a bug into my implementation where we skip the shared cleanups on block reuse, ASAN detects the bug in `db_basic_test *MultiGet*`. If I remove either of the above testing enhancements, the bug is not detected. Consider for follow-up work: manipulate or randomize ordering of PinnableSlice use and release from MultiGet db_test_util wrapper. But in typical cases, natural ordering gives pretty good functional coverage. Performance test: In the extreme (but possible) case of MultiGetting the same or adjacent keys in a batch, throughput can improve by an order of magnitude. `./db_bench -benchmarks=multireadrandom -db=/dev/shm/testdb -readonly -num=5 -duration=10 -threads=20 -multiread_batched -batch_size=200` Before ops/sec, num=5: 1,384,394 Before ops/sec, num=500: 6,423,720 After ops/sec, num=500: 10,658,794 After ops/sec, num=5: 16,027,257 Also note that previously, with high parallelism, having query keys concentrated in a single block was worse than spreading them out a bit. Now concentrated in a single block is faster than spread out, which is hopefully consistent with natural expectation. Random query performance: with num=1000000, over 999 x 10s runs running before & after simultaneously (each -threads=12): Before: multireadrandom [AVG 999 runs] : 1088699 (± 7344) ops/sec; 120.4 (± 0.8 ) MB/sec After: multireadrandom [AVG 999 runs] : 1090402 (± 7230) ops/sec; 120.6 (± 0.8 ) MB/sec Possibly better, possibly in the noise. Reviewed By: anand1976 Differential Revision: D35907003 Pulled By: pdillinger fbshipit-source-id: bbd244d703649a8ca12d476f2d03853ed9d1a17e |
2 years ago |
|
Andrew Kryczka
|
c5d367f472 |
Revert open logic changes in #9634 (#9906)
Summary: Left HISTORY.md and unit tests. Added a new unit test to repro the corruption scenario that this PR fixes, and HISTORY.md line for that. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9906 Reviewed By: riversand963 Differential Revision: D35940093 Pulled By: ajkr fbshipit-source-id: 9816f99e1ce405ba36f316beb4f6378c37c8c86b |
2 years ago |
|
Akanksha Mahajan
|
3653029dda |
Add stats related to async prefetching (#9845)
Summary: Add stats PREFETCHED_BYTES_DISCARDED and POLL_WAIT_MICROS. PREFETCHED_BYTES_DISCARDED records number of prefetched bytes discarded by FilePrefetchBuffer. POLL_WAIT_MICROS records the time taken by underling file_system Poll API. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9845 Test Plan: Update existing tests Reviewed By: anand1976 Differential Revision: D35909694 Pulled By: akankshamahajan15 fbshipit-source-id: e009ef940bb9ed72c9446f5529095caabb8a1e36 |
2 years ago |
|
RoeyMaor
|
6d2577e567 |
Bugfix/fix manual flush blocking bug (#9893)
Summary: Fix https://github.com/facebook/rocksdb/issues/9892 Pull Request resolved: https://github.com/facebook/rocksdb/pull/9893 Reviewed By: jay-zhuang Differential Revision: D35880959 Pulled By: ajkr fbshipit-source-id: dad1139ad0983cfbd5c5cd6fa6b71022f889735a |
2 years ago |
|
Akanksha Mahajan
|
5bd374b392 |
Add experimental new FS API AbortIO to cancel read request (#9901)
Summary: Add experimental new API AbortIO in FileSystem to abort the read requests submitted asynchronously through ReadAsync API. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9901 Test Plan: Existing tests Reviewed By: anand1976 Differential Revision: D35885591 Pulled By: akankshamahajan15 fbshipit-source-id: df3944e6e9e6e487af1fa688376b4abb6837fb02 |
2 years ago |
|
Yanqin Jin
|
d13825e586 |
Add rollback_deletion_type_callback to TxnDBOptions (#9873)
Summary:
This PR does not affect write-committed.
Add a member, `rollback_deletion_type_callback` to TransactionDBOptions
so that a write-prepared transaction, when rolling back, can call this
callback to decide if a `Delete` or `SingleDelete` should be used to
cancel a prior `Put` written to the database during prepare phase.
The purpose of this PR is to prevent mixing `Delete` and `SingleDelete`
for the same key, causing undefined behaviors. Without this PR, the
following can happen:
```
// The application always issues SingleDelete when deleting keys.
txn1->Put('a');
txn1->Prepare(); // writes to memtable and potentially gets flushed/compacted to Lmax
txn1->Rollback(); // inserts DELETE('a')
txn2->Put('a');
txn2->Commit(); // writes to memtable and potentially gets flushed/compacted
```
In the database, we may have
```
L0: [PUT('a', s=100)]
L1: [DELETE('a', s=90)]
Lmax: [PUT('a', s=0)]
```
If a compaction compacts L0 and L1, then we have
```
L1: [PUT('a', s=100)]
Lmax: [PUT('a', s=0)]
```
If a future transaction issues a SingleDelete, we have
```
L0: [SD('a', s=110)]
L1: [PUT('a', s=100)]
Lmax: [PUT('a', s=0)]
```
Then, a compaction including L0, L1 and Lmax leads to
```
Lmax: [PUT('a', s=0)]
```
which is incorrect.
Similar bugs reported and addressed in
https://github.com/cockroachdb/pebble/issues/1255. Based on our team's
current priority, we have decided to take this approach for now. We may
come back and revisit in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9873
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D35762170
Pulled By: riversand963
fbshipit-source-id: b28d56eefc786b53c9844b9ef4a7807acdd82c8d
|
2 years ago |
|
Peter Dillinger
|
1bac873fcf |
Mark GetLiveFilesStorageInfo ready for production use (#9868)
Summary: ... by filling out remaining testing hole: handling of db_pathsi+cf_paths. (Note that while GetLiveFilesStorageInfo works with db_paths / cf_paths, Checkpoint and BackupEngine do not and are marked appropriately.) Also improved comments for "live files" APIs, and grouped them together in db.h. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9868 Test Plan: Adding to existing unit tests Reviewed By: jay-zhuang Differential Revision: D35752254 Pulled By: pdillinger fbshipit-source-id: c70eb67748fad61826e2f554b674638700abefb2 |
2 years ago |
|
Jay Zhuang
|
2ea4205a69 |
Add 7.2 to compatible check (#9858)
Summary: Add 7.2 to compatible check (should change it with version update). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9858 Reviewed By: riversand963 Differential Revision: D35722897 Pulled By: jay-zhuang fbshipit-source-id: 08c782b9344599d7296543eb0c61afcd9a869a1a |
2 years ago |
|
Bo Wang
|
01fdec23fe |
Add release note for #9747 (#9874)
Summary: Add release note for CompressedSecondaryCache and the update of SecondaryCache::Lookup(). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9874 Reviewed By: jay-zhuang Differential Revision: D35765973 Pulled By: gitbw95 fbshipit-source-id: 98232508c4f2047216def9c11a038cfb98709690 |
2 years ago |
|
Peter Dillinger
|
682fc8ba6a |
Release note for #9546 (#9872)
Summary: We don't really have a mechanism for internal-only release notes, so adding this to the standard release notes. For picking into 7.2 release. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9872 Test Plan: release note only Reviewed By: jay-zhuang Differential Revision: D35761307 Pulled By: pdillinger fbshipit-source-id: 5d1932767fff48456323df948604dbb956ac27b2 |
2 years ago |
|
Jay Zhuang
|
673ada8225 |
Update HISTORY.md for 7.2 release (#9848)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9848 Reviewed By: riversand963 Differential Revision: D35677606 Pulled By: jay-zhuang fbshipit-source-id: 8a597ea47f302a6f51fb6672a33c848d613bccfc |
2 years ago |
|
sdong
|
4f9c0fd083 |
Add Aggregation Merge Operator (#9780)
Summary: Add a merge operator that allows users to register specific aggregation function so that they can does aggregation based per key using different aggregation types. See comments of function CreateAggMergeOperator() for actual usage. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9780 Test Plan: Add a unit test to coverage various cases. Reviewed By: ltamasi Differential Revision: D35267444 fbshipit-source-id: 5b02f31c4f3e17e96dd4025cdc49fca8c2868628 |
2 years ago |
|
Yanqin Jin
|
be81609b43 |
Add a `fail_if_not_bottommost_level` to IngestExternalFileOptions (#9849)
Summary: This new options allows application to specify that files must be ingested to bottommost level, otherwise the ingestion will fail instead of silently ingesting to a non-bottommost level. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9849 Test Plan: make check Reviewed By: ajkr Differential Revision: D35680307 Pulled By: riversand963 fbshipit-source-id: 01cf54ef6c76198f7654dc06b5544631dea1be1e |
2 years ago |
|
Akanksha Mahajan
|
0c7f455f85 |
Make initial auto readahead_size configurable (#9836)
Summary: Make initial auto readahead_size configurable Pull Request resolved: https://github.com/facebook/rocksdb/pull/9836 Test Plan: Added new unit test Ran regression: Without change: ``` ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 7.0 Date: Thu Mar 17 13:11:34 2022 CPU: 24 * Intel Core Processor (Broadwell) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 5000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 2594.0 MB (estimated) FileSize: 1373.3 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_main] seekrandom : 483618.390 micros/op 2 ops/sec; 338.9 MB/s (249 of 249 found) ``` With this change: ``` ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 Set seed to 1649895440554504 because --seed was 0 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 7.2 Date: Wed Apr 13 17:17:20 2022 CPU: 24 * Intel Core Processor (Broadwell) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 5000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 2594.0 MB (estimated) FileSize: 1373.3 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_main] ... finished 100 ops seekrandom : 476892.488 micros/op 2 ops/sec; 344.6 MB/s (252 of 252 found) ``` Reviewed By: anand1976 Differential Revision: D35632815 Pulled By: akankshamahajan15 fbshipit-source-id: c8057a88f9294c9d03b1d434b03affe02f74d796 |
2 years ago |
|
Yanqin Jin
|
fe63899d1a |
Add checks to GetUpdatesSince (#9459)
Summary: Make `DB::GetUpdatesSince` return early if told to scan WALs generated by transactions with write-prepared or write-unprepared policies (`seq_per_batch` is true), as indicated by API comment. Also add checks to `TransactionLogIterator` to clarify some conditions. No API change. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9459 Test Plan: make check Closing https://github.com/facebook/rocksdb/issues/1565 Reviewed By: akankshamahajan15 Differential Revision: D33821243 Pulled By: riversand963 fbshipit-source-id: c8b155d020ce0980e2d3b3b1da40b96e65b48d79 |
2 years ago |