Summary: GetCurrentMutableCFOptions() can only be called when DB mutex is held so we cannot call it in CompactionJob::ProcessKeyValueCompaction() since it's not holding the db mutex
Test Plan: make check -j64
Reviewers: sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57471
Summary: Added EventListener::OnTableFileCreationStarted. EventListener::OnTableFileCreated will be called on failure case. User can check creation status via TableFileCreationInfo::status.
Test Plan: unit test.
Reviewers: dhruba, yhchiang, ott, sdong
Reviewed By: sdong
Subscribers: sdong, kradhakrishnan, IslamAbdelRahman, andrewkr, yhchiang, leveldb, ott, dhruba
Differential Revision: https://reviews.facebook.net/D56337
Summary:
This adds a new metablock containing a shared dictionary that is used
to compress all data blocks in the SST file. The size of the shared dictionary
is configurable in CompressionOptions and defaults to 0. It's currently only
used for zlib/lz4/lz4hc, but the block will be stored in the SST regardless of
the compression type if the user chooses a nonzero dictionary size.
During compaction, computes the dictionary by randomly sampling the first
output file in each subcompaction. It pre-computes the intervals to sample
by assuming the output file will have the maximum allowable length. In case
the file is smaller, some of the pre-computed sampling intervals can be beyond
end-of-file, in which case we skip over those samples and the dictionary will
be a bit smaller. After the dictionary is generated using the first file in a
subcompaction, it is loaded into the compression library before writing each
block in each subsequent file of that subcompaction.
On the read path, gets the dictionary from the metablock, if it exists. Then,
loads that dictionary into the compression library before reading each block.
Test Plan: new unit test
Reviewers: yhchiang, IslamAbdelRahman, cyan, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52287
Summary:
In some case, it is possible to have two concesutive SST files might sharing
same boundary keys. However, in the assertion in Compaction::ShouldStopBefore,
it exclude such possibility.
This patch fix this issue by relaxing the assertion to allow the equal case.
Test Plan: rocksdb tests
Reviewers: IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55875
Summary:
Added the column family name to the properties block. This property
is omitted only if the property is unavailable, such as when RepairDB()
writes SST files.
In a next diff, I will change RepairDB to use this new property for
deciding to which column family an existing SST file belongs. If this
property is missing, it will add it to the "unknown" column family (same
as its existing behavior).
Test Plan:
New unit test:
$ ./db_table_properties_test --gtest_filter=DBTablePropertiesTest.GetColumnFamilyNameProperty
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55605
Summary:
When subcompaction is used, all subcompactions share the same Compaction
pointer in CompactionJob while each subcompaction all keeps their mutable
stats in SubcompactionState. However, there're still some mutable part
that is currently store in the shared Compaction pointer.
This patch makes two changes:
1. Make the shared Compaction pointer const so that it can never be modified
during the compaction.
2. Move necessary states from Compaction to SubcompactionState.
3. Make functions of Compaction const if the function does not modify
its internal state.
Test Plan: rocksdb and MyRocks test
Reviewers: sdong, kradhakrishnan, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, yoshinorim, gunnarku, leveldb
Differential Revision: https://reviews.facebook.net/D55923
Summary: Now we skip to add boundary keys to subcompaction candidates since we see an empty level. This makes subcompaction almost disabled for universal compaction. We should consider all files instead.
Test Plan: Run existing tests.
Reviewers: IslamAbdelRahman, andrewkr, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D55005
Summary:
Introude SstFileManager::SetMaxAllowedSpaceUsage() that can be used to limit the maximum space usage allowed for RocksDB.
When this limit is exceeded WriteImpl() will fail and return Status::Aborted()
Test Plan: unit testing
Reviewers: yhchiang, anthony, andrewkr, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53763
Summary:
Add a new class SstFileTracker that will be notified whenever a DB add/delete/move and sst file, it will also replace DeleteScheduler
SstFileTracker can be used later to abort writes when we exceed a specific size
Test Plan: unit tests
Reviewers: rven, anthony, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, lovro, march, dhruba
Differential Revision: https://reviews.facebook.net/D50469
Summary:
We can avoid the dependency by forward-declaring ColumnFamilyData and
then treating it as a black box. That means callers of ThreadStatusUtil need to
explicitly provide more options, even if they can be derived from the
ColumnFamilyData, since ThreadStatusUtil doesn't include the definition.
This is part of a series of diffs to eliminate circular dependencies between
directories (e.g., db/* files depending on util/* files and vice-versa).
Test Plan:
$ ./db_test --gtest_filter=DBTest.GetThreadStatus
$ make -j32 commit-prereq
Reviewers: sdong, yhchiang, IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53361
Summary:
D51183 was reverted due to breaking the LITE build.
This diff is the same as D51183 but with a fix for the LITE BUILD(D51693)
Test Plan: run all unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51711
Summary:
D50475 enables using SST files for transaction write-conflict checking. In order for this to work, we need to make sure not to compact out SingleDeletes when there is an earlier transaction snapshot(D50295). If there is a long-held snapshot, this could reduce the benefit of the SingleDelete optimization.
This diff allows Transactions to mark snapshots as being used for write-conflict checking. Then, during compaction, we will be able to optimize SingleDeletes better in the future.
This diff adds a flag to SnapshotImpl which is used by Transactions. This diff also passes the earliest write-conflict snapshot's sequence number to CompactionIterator. This diff does not actually change Compaction (after this diff is pushed, D50295 will be able to use this information).
Test Plan: no behavior change, ran existing tests
Reviewers: rven, kradhakrishnan, yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51183
Summary: We don't yet have a CI build for iOS, so our iOS compile gets broken sometimes. Most of the errors are from assumption that size_t is 64-bit, while it's actually 32-bit on some (all?) iOS platforms. This diff fixes the compile.
Test Plan:
TARGET_OS=IOS make static_lib
Observe there are no warnings
Reviewers: sdong, anthony, IslamAbdelRahman, kradhakrishnan, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49029
Summary:
Add kill points in:
1. after creating a file
2. before writing a manifest record
3. before syncing manifest
4. before creating a new current file
5. after creating a new current file
Test Plan: Run all current tests.
Reviewers: yhchiang, igor, anthony, IslamAbdelRahman, rven, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48855
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.
This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.
Test Plan: Run all existing tests.
Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48549
Summary: It would be nice to have and access to table properties in compaction callbacks. In MyRocks project, it will make possible to update optimizer statistics online.
Test Plan: ran the unit test. Ran myrocks with the new way of collecting stats.
Reviewers: igor, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48267
Summary: Pass column family ID through TablePropertiesCollectorFactory::CreateTablePropertiesCollector() so that users can identify which column family this file is for and handle it differently.
Test Plan: Add unit test scenarios in tests related to table properties collectors to verify the information passed in is correct.
Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48411
Summary:
Since Andres' internship is over, I took over https://reviews.facebook.net/D42555 and rebased and simplified it a bit.
The behavior in this diff is a bit simpler than in D42555:
* only merge operators are passed through FilterMergeValue(). If fitler function returns true, the merge operator is ignored
* compaction filter is *not* called on: 1) results of merge operations and 2) base values that are getting merged with merge operands (the second case was also true in previous diff)
Do we also need a compaction filter to get called on merge results?
Test Plan: make && make check
Reviewers: lovro, tnovak, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: noetzli, kolmike, leveldb, dhruba, sdong
Differential Revision: https://reviews.facebook.net/D47847
Summary:
Although compaction time is recorded in the statistics,
it is helpful to include this value in the log output corresponding
to the end of compaction.
Test Plan: make all && make check
Reviewers: yhchiang, sdong, igor, noetzli, MarkCallaghan
Reviewed By: MarkCallaghan
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D47007
Summary:
Although there are currently counters to keep track of the
stall caused by having too many L0 files, there is no distinction as
to whether when that stall occurs either (A) L0-L1 compaction is taking
place to try and mitigate it, or (B) no L0-L1 compaction has been scheduled
at the moment. This diff adds a counter for (A) so that the nature of L0
stalls can be better understood.
Test Plan: make all && make check
Reviewers: sdong, igor, anthony, noetzli, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, dhruba
Differential Revision: https://reviews.facebook.net/D46749
Summary:
Builder and CompactionJob share a lot of fairly complex code. This patch
refactors this code into a separate class, the CompactionIterator. Because the
shared code is fairly complex, this patch hopefully improves maintainability.
While there are is a lot of potential for further improvements, the patch is
intentionally pretty close to the original structure because the change is
already complex enough.
Test Plan: make clean all check && ./db_stress
Reviewers: rven, anthony, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46197
Summary:
Up to this point, the subcompactions that make up a compaction
job have been divided based on the key range of the L1 files, and each
subcompaction has handled the key range of only one file. However
DBOption.max_subcompactions allows the user to designate how many
subcompactions at most to perform. This patch updates the
CompactionJob::GetSubcompactionBoundaries() to determine these
divisions accordingly based on that option and other input/system factors.
The current approach orders the starting and/or ending keys of certain
compaction input files and then generates a histogram to approximate the
size covered by the key range between each consecutive pair of keys. Then
it groups these ranges into groups so that the sizes are approximately equal
to one another. The approach has also been adapted to work for universal
compaction as well instead of just for level-based compaction as it was before.
These subcompactions are then executed in parallel by locally spawning
threads, one for each. The results are then aggregated and the compaction
completed.
Test Plan: make all && make check
Reviewers: yhchiang, anthony, igor, noetzli, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43269
Summary:
In some cases, equality comparisons can be done more efficiently than three-way
comparisons. There are quite a few places in the code where we only care about
equality. This patch adds an Equal() method that defaults to using the
Compare() method.
Test Plan: make clean all check
Reviewers: rven, anthony, yhchiang, igor, sdong
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46233
Summary:
It was pointed out to me that the members of SubCompactionState
'earliest_snapshot', 'latest_snapshot' and 'visible_at_tip' are never
modified by the subcompactions, so they can stay as global varaibles
instead to make things simpler.
Test Plan: make all && make check
Reviewers: sdong, igor, noetzli, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D45477
Summary:
Up until this point we had DbOptions.num_subcompactions, but
it is semantically more correct to call this max_subcompactions since
we will schedule *up to* DbOptions.max_subcompactions smaller compactions
at a time during a compaction job.
I also added a --subcompactions option to db_bench
Test Plan: make all make check
Reviewers: sdong, igor, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D45069
Summary: Add more test cases of data race causing wrong iterating results. Tag tests not passing as DISABLED_
Test Plan: Run the tests
Reviewers: igor, rven, IslamAbdelRahman, anthony, kradhakrishnan, yhchiang
Reviewed By: yhchiang
Subscribers: tnovak, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44907
Summary:
A couple variables were declared but only used in assertions
which causes issues when building in fbcode.
Test Plan: make dbg and make release
Reviewers: yhchiang, sdong, igor, anthony, MarkCallaghan
Reviewed By: MarkCallaghan
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D44937
Summary:
In D43239 (https://reviews.facebook.net/D43239) the number
of subcompactions is set based on the number of L1 files with
unique starting keys. In certain cases when this number is very large
this causes issues, particularly with the overlap between files since
very small output files can be generated. This diff bounds the number
of subcompactions to the user option DBOption.num_subcompactions.
Test Plan: ./db_test ./db_compaction_test
Reviewers: sdong, igor, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D44883
Summary:
In D43239 (https://reviews.facebook.net/D43239) there is an
assertion to make sure a subcompaction's output is never empty at the
end of execution. This assertion however breaks the build because some
tests lead to exactly that scenario. So instead I have altered the logic
to handle this case instead of just failing the assertion.
The reason that it is possible for a subcompaction's output to be empty is
that during a sequential execution of subcompactions, if a user aborts the
compaction job then some of the later subcompactions to be executed may
have yet to process any keys and therefore have yet to generate output files.
This becomes very rare once the subcompactions are executed in parallel,
but for now they are still sequential so the case is possible when there is an
early termination, as in some of the tests.
Test Plan: ./db_test ./db_compaction_test
Reviewers: sdong, igor, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D44877
Summary:
In prepration for running multiple threads at the same time during
a compaction job, this patch assigns each subcompaction its own state
(instead of sharing the one global CompactionState). Each subcompaction then
uses this state to update its statistics, keep track of its snapshots, etc.
during the course of execution. Then at the end of all the executions the
statistics are aggregated across the subcompactions so that the final result
is the same as if only one larger compaction had run.
Test Plan: ./db_test ./db_compaction_test ./compaction_job_test
Reviewers: sdong, anthony, igor, noetzli, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43239
Summary:
While working on supporting mixing merge operators with
single deletes ( https://reviews.facebook.net/D43179 ),
I realized that returning and dealing with merge results
can be made simpler. Submitting this as a separate diff
because it is not directly related to single deletes.
Before, callers of merge helper had to retrieve the merge
result in one of two ways depending on whether the merge
was successful or not (success = result of merge was single
kTypeValue). For successful merges, the caller could query
the resulting key/value pair and for unsuccessful merges,
the result could be retrieved in the form of two deques of
keys and values. However, with single deletes, a successful merge
does not return a single key/value pair (if merge
operands are merged with a single delete, we have to generate
a value and keep the original single delete around to make
sure that we are not accidentially producing a key overwrite).
In addition, the two existing call sites of the merge
helper were taking the same actions independently from whether
the merge was successful or not, so this patch simplifies that.
Test Plan: make clean all check
Reviewers: rven, sdong, yhchiang, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43353
Summary: In internal stats, remember read latency histogram, if statistics is enabled. It can be retrieved from DB::GetProperty() with "rocksdb.dbstats" property, if it is enabled.
Test Plan: Manually run db_bench and prints out "rocksdb.dbstats" by hand and make sure it prints out as expected
Reviewers: igor, IslamAbdelRahman, rven, kradhakrishnan, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44193
Summary:
Add options.compaction_measure_io_stats to print out / pass to listener accumulated time spent on write calls. Example outputs in info logs:
2015/08/12-16:27:59.463944 7fd428bff700 (Original Log Time 2015/08/12-16:27:59.463922) EVENT_LOG_v1 {"time_micros": 1439422079463897, "job": 6, "event": "compaction_finished", "output_level": 1, "num_output_files": 4, "total_output_size": 6900525, "num_input_records": 111483, "num_output_records": 106877, "file_write_nanos": 15663206, "file_range_sync_nanos": 649588, "file_fsync_nanos": 349614797, "file_prepare_write_nanos": 1505812, "lsm_state": [2, 4, 0, 0, 0, 0, 0]}
Add two more counters in iostats_context.
Also add a parameter of db_bench.
Test Plan: Add a unit test. Also manually verify LOG outputs in db_bench
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44115
Summary:
Changed compaction_job_test to support better/more thorough
tests and added two tests. Also changed MockFileContents
to order using InternalKeyComparator.
Test Plan: make compaction_job_test && ./compaction_job_test; make all && make check
Reviewers: sdong, rven, igor, yhchiang, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42837
Summary: Measure read latency histogram and put in statistics. Compaction inputs are excluded from it when possible (unfortunately usually no possible as we usually take table reader from table cache.
Test Plan:
Run db_bench and it shows the stats, like:
rocksdb.sst.read.micros statistics Percentiles :=> 50 : 1.238522 95 : 2.529740 99 : 3.912180
Reviewers: kradhakrishnan, rven, anthony, IslamAbdelRahman, MarkCallaghan, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43275
Summary:
As of now compactions involving files from Level 0 and Level 1 are single
threaded because the files in L0, although sorted, are not range partitioned like
the other levels. This means that during L0-L1 compaction each file from L1
needs to be merged with potentially all the files from L0.
This attempt to parallelize the L0-L1 compaction assigns a thread and a
corresponding iterator to each L1 file that then considers only the key range
found in that L1 file and only the L0 files that have those keys (and only the
specific portion of those L0 files in which those keys are found). In this way
the overlap is minimized and potentially eliminated between different iterators
focusing on the same files.
The first step is to restructure the compaction logic to break L0-L1 compactions
into multiple, smaller, sequential compactions. Eventually each of these smaller
jobs will be run simultaneously. Areas to pay extra attention to are
# Correct aggregation of compaction job statistics across multiple threads
# Proper opening/closing of output files (make sure each thread's is unique)
# Keys that span multiple L1 files
# Skewed distributions of keys within L0 files
Test Plan: Make and run db_test (newer version has separate compaction tests) and compaction_job_stats_test
Reviewers: igor, noetzli, anthony, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42699
Summary:
For task #7771355, we would like to log the number of corrupt keys
during a compaction. This patch implements and tests the count
as part of CompactionJobStats.
Test Plan: make && make check
Reviewers: rven, igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42921
Aaron Gao