Tag:
Branch:
Tree:
6650ca244e
main
oxigraph-8.1.1
oxigraph-8.3.2
oxigraph-main
${ noResults }
1460 Commits (6650ca244ed27e852e8325f593faf863eaeb47da)
| Author | SHA1 | Message | Date |
|---|---|---|---|
Peter Dillinger
|
390cc0b156 |
Ensure LockWAL() stall cleared for UnlockWAL() return (#11172)
Summary: Fixes https://github.com/facebook/rocksdb/issues/11160 By counting the number of stalls placed on a write queue, we can check in UnlockWAL() whether the stall present at the start of UnlockWAL() has been cleared by the end, or wait until it's cleared. More details in code comments and new unit test. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11172 Test Plan: unit test added. Yes, it uses sleep to amplify failure on buggy behavior if present, but using a sync point to only allow new behavior would fail with the old code only because it doesn't contain the new sync point. Basically, using a sync point in UnlockWAL() could easily mask a regression by artificially limiting key behaviors. The test would only check that UnlockWAL() invokes code that *should* do the right thing, without checking that it *does* the right thing. Reviewed By: ajkr Differential Revision: D42894341 Pulled By: pdillinger fbshipit-source-id: 15c9da0ca383e6aec845b29f5447d76cecbf46c3 |
2 years ago |
|
Peter Dillinger
|
94e3beec77 |
Cleanup, improve, stress test LockWAL() (#11143)
Summary: The previous API comments for LockWAL didn't provide much about why you might want to use it, and didn't really meet what one would infer its contract was. Also, LockWAL was not in db_stress / crash test. In this change: * Implement a counting semantics for LockWAL()+UnlockWAL(), so that they can safely be used concurrently across threads or recursively within a thread. This should make the API much less bug-prone and easier to use. * Make sure no UnlockWAL() is needed after non-OK LockWAL() (to match RocksDB conventions) * Make UnlockWAL() reliably return non-OK when there's no matching LockWAL() (for debug-ability) * Clarify API comments on LockWAL(), UnlockWAL(), FlushWAL(), and SyncWAL(). Their exact meanings are not obvious, and I don't think it's appropriate to talk about implementation mutexes in the API comments, but about what operations might block each other. * Add LockWAL()/UnlockWAL() to db_stress and crash test, mostly to check for assertion failures, but also checks that latest seqno doesn't change while WAL is locked. This is simpler to add when LockWAL() is allowed in multiple threads. * Remove unnecessary use of sync points in test DBWALTest::LockWal. There was a bug during development of above changes that caused this test to fail sporadically, with and without this sync point change. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11143 Test Plan: unit tests added / updated, added to stress/crash test Reviewed By: ajkr Differential Revision: D42848627 Pulled By: pdillinger fbshipit-source-id: 6d976c51791941a31fd8fbf28b0f82e888d9f4b4 |
2 years ago |
|
sdong
|
4720ba4391 |
Remove RocksDB LITE (#11147)
Summary: We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support. Most of changes were done through following comments: unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'` by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147 Test Plan: See CI Reviewed By: pdillinger Differential Revision: D42796341 fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2 |
2 years ago |
|
Yu Zhang
|
6943ff6e50 |
Remove deprecated util functions in options_util.h (#11126)
Summary: Remove the util functions in options_util.h that have previously been marked deprecated. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11126 Test Plan: `make check` Reviewed By: ltamasi Differential Revision: D42757496 Pulled By: jowlyzhang fbshipit-source-id: 2a138a3c207d0e0e0bbb4d99548cf2cadb44bcfb |
2 years ago |
|
Peter Dillinger
|
546e213c4f |
Fix DelayWrite() calls for two_write_queues (#11130)
Summary: PR https://github.com/facebook/rocksdb/issues/11020 fixed a case where it was easy to deadlock the DB with LockWAL() but introduced a bug showing up as a rare assertion failure in the stress test. Specifically, `assert(w->state == STATE_INIT)` in `WriteThread::LinkOne()` called from `BeginWriteStall()`, `DelayWrite()`, `WriteImplWALOnly()`. I haven't been about to generate a unit test that reproduces this failure but I believe the root cause is that DelayWrite() was never meant to be re-entrant, only called from the DB's write_thread_ leader. https://github.com/facebook/rocksdb/issues/11020 introduced a call to DelayWrite() from the nonmem_write_thread_ group leader. This fix is to make DelayWrite() apply to the specific write queue that it is being called from (inject a dummy write stall entry to the head of the appropriate write queue). WriteController is re-entrant, based on polling and state changes signalled with bg_cv_, so can manage stalling two queues. The only anticipated complication (called out by Andrew in previous PR) is that we don't want timed write delays being injected in parallel for the two queues, because that dimishes the intended throttling effect. Thus, we only allow timed delays for the primary write queue. HISTORY not updated because this is intended for the same release where the bug was introduced. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11130 Test Plan: Although I was not able to reproduce the assertion failure, I was able to reproduce a distinct flaw with what I believe is the same root cause: a kind of deadlock if both write queues need to wake up from stopped writes. Only one will be waiting on bg_cv_ (the other waiting in `LinkOne()` for the write queue to open up), so a single SignalAll() will only unblock one of the queues, with the other re-instating the stop until another signal on bg_cv_. A simple unit test is added for this case. Will also run crash_test_with_multiops_wc_txn for a while looking for issues. Reviewed By: ajkr Differential Revision: D42749330 Pulled By: pdillinger fbshipit-source-id: 4317dd899a93d57c26fd5af7143038f82d4d4d1b |
2 years ago |
|
sdong
|
2800aa069a |
Remove compressed block cache (#11117)
Summary: Compressed block cache is replaced by compressed secondary cache. Remove the feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11117 Test Plan: See CI passes Reviewed By: pdillinger Differential Revision: D42700164 fbshipit-source-id: 6cbb24e460da29311150865f60ecb98637f9f67d |
2 years ago |
|
Andrew Kryczka
|
b7fbcefda8 |
Add API to limit blast radius of merge operator failure (#11092)
Summary: Prior to this PR, `FullMergeV2()` can only return `false` to indicate failure, which causes any operation invoking it to fail. During a compaction, such a failure causes the compaction to fail and causes the DB to irreversibly enter read-only mode. Some users asked for a way to allow the merge operator to fail without such widespread damage. To limit the blast radius of merge operator failures, this PR introduces the `MergeOperationOutput::op_failure_scope` API. When unpopulated (`kDefault`) or set to `kTryMerge`, the merge operator failure handling is the same as before. When set to `kMustMerge`, merge operator failure still causes failure to operations that must merge (`Get()`, iterator, `MultiGet()`, etc.). However, under `kMustMerge`, flushes/compactions can survive merge operator failures by outputting the unmerged input operands. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11092 Reviewed By: siying Differential Revision: D42525673 Pulled By: ajkr fbshipit-source-id: 951dc3bf190f86347dccf3381be967565cda52ee |
2 years ago |
|
Wenlong Zhang
|
1cfe3528a2 |
support loongarch64 for rocksdb (#10036)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10036 Reviewed By: hx235 Differential Revision: D42424074 Pulled By: ajkr fbshipit-source-id: 004adb75005a26bd01c5d568d1ec6ac442cd59dd |
2 years ago |
|
Peter Dillinger
|
9f7801c5f1 |
Major Cache refactoring, CPU efficiency improvement (#10975)
Summary: This is several refactorings bundled into one to avoid having to incrementally re-modify uses of Cache several times. Overall, there are breaking changes to Cache class, and it becomes more of low-level interface for implementing caches, especially block cache. New internal APIs make using Cache cleaner than before, and more insulated from block cache evolution. Hopefully, this is the last really big block cache refactoring, because of rather effectively decoupling the implementations from the uses. This change also removes the EXPERIMENTAL designation on the SecondaryCache support in Cache. It seems reasonably mature at this point but still subject to change/evolution (as I warn in the API docs for Cache). The high-level motivation for this refactoring is to minimize code duplication / compounding complexity in adding SecondaryCache support to HyperClockCache (in a later PR). Other benefits listed below. * static_cast lines of code +29 -35 (net removed 6) * reinterpret_cast lines of code +6 -32 (net removed 26) ## cache.h and secondary_cache.h * Always use CacheItemHelper with entries instead of just a Deleter. There are several motivations / justifications: * Simpler for implementations to deal with just one Insert and one Lookup. * Simpler and more efficient implementation because we don't have to track which entries are using helpers and which are using deleters * Gets rid of hack to classify cache entries by their deleter. Instead, the CacheItemHelper includes a CacheEntryRole. This simplifies a lot of code (cache_entry_roles.h almost eliminated). Fixes https://github.com/facebook/rocksdb/issues/9428. * Makes it trivial to adjust SecondaryCache behavior based on kind of block (e.g. don't re-compress filter blocks). * It is arguably less convenient for many direct users of Cache, but direct users of Cache are now rare with introduction of typed_cache.h (below). * I considered and rejected an alternative approach in which we reduce customizability by assuming each secondary cache compatible value starts with a Slice referencing the uncompressed block contents (already true or mostly true), but we apparently intend to stack secondary caches. Saving an entry from a compressed secondary to a lower tier requires custom handling offered by SaveToCallback, etc. * Make CreateCallback part of the helper and introduce CreateContext to work with it (alternative to https://github.com/facebook/rocksdb/issues/10562). This cleans up the interface while still allowing context to be provided for loading/parsing values into primary cache. This model works for async lookup in BlockBasedTable reader (reader owns a CreateContext) under the assumption that it always waits on secondary cache operations to finish. (Otherwise, the CreateContext could be destroyed while async operation depending on it continues.) This likely contributes most to the observed performance improvement because it saves an std::function backed by a heap allocation. * Use char* for serialized data, e.g. in SaveToCallback, where void* was confusingly used. (We use `char*` for serialized byte data all over RocksDB, with many advantages over `void*`. `memcpy` etc. are legacy APIs that should not be mimicked.) * Add a type alias Cache::ObjectPtr = void*, so that we can better indicate the intent of the void* when it is to be the object associated with a Cache entry. Related: started (but did not complete) a refactoring to move away from "value" of a cache entry toward "object" or "obj". (It is confusing to call Cache a key-value store (like DB) when it is really storing arbitrary in-memory objects, not byte strings.) * Remove unnecessary key param from DeleterFn. This is good for efficiency in HyperClockCache, which does not directly store the cache key in memory. (Alternative to https://github.com/facebook/rocksdb/issues/10774) * Add allocator to Cache DeleterFn. This is a kind of future-proofing change in case we get more serious about using the Cache allocator for memory tracked by the Cache. Right now, only the uncompressed block contents are allocated using the allocator, and a pointer to that allocator is saved as part of the cached object so that the deleter can use it. (See CacheAllocationPtr.) If in the future we are able to "flatten out" our Cache objects some more, it would be good not to have to track the allocator as part of each object. * Removes legacy `ApplyToAllCacheEntries` and changes `ApplyToAllEntries` signature for Deleter->CacheItemHelper change. ## typed_cache.h Adds various "typed" interfaces to the Cache as internal APIs, so that most uses of Cache can use simple type safe code without casting and without explicit deleters, etc. Almost all of the non-test, non-glue code uses of Cache have been migrated. (Follow-up work: CompressedSecondaryCache deserves deeper attention to migrate.) This change expands RocksDB's internal usage of metaprogramming and SFINAE (https://en.cppreference.com/w/cpp/language/sfinae). The existing usages of Cache are divided up at a high level into these new interfaces. See updated existing uses of Cache for examples of how these are used. * PlaceholderCacheInterface - Used for making cache reservations, with entries that have a charge but no value. * BasicTypedCacheInterface<TValue> - Used for primary cache storage of objects of type TValue, which can be cleaned up with std::default_delete<TValue>. The role is provided by TValue::kCacheEntryRole or given in an optional template parameter. * FullTypedCacheInterface<TValue, TCreateContext> - Used for secondary cache compatible storage of objects of type TValue. In addition to BasicTypedCacheInterface constraints, we require TValue::ContentSlice() to return persistable data. This simplifies usage for the normal case of simple secondary cache compatibility (can give you a Slice to the data already in memory). In addition to TCreateContext performing the role of Cache::CreateContext, it is also expected to provide a factory function for creating TValue. * For each of these, there's a "Shared" version (e.g. FullTypedSharedCacheInterface) that holds a shared_ptr to the Cache, rather than assuming external ownership by holding only a raw `Cache*`. These interfaces introduce specific handle types for each interface instantiation, so that it's easy to see what kind of object is controlled by a handle. (Ultimately, this might not be worth the extra complexity, but it seems OK so far.) Note: I attempted to make the cache 'charge' automatically inferred from the cache object type, such as by expecting an ApproximateMemoryUsage() function, but this is not so clean because there are cases where we need to compute the charge ahead of time and don't want to re-compute it. ## block_cache.h This header is essentially the replacement for the old block_like_traits.h. It includes various things to support block cache access with typed_cache.h for block-based table. ## block_based_table_reader.cc Before this change, accessing the block cache here was an awkward mix of static polymorphism (template TBlocklike) and switch-case on a dynamic BlockType value. This change mostly unifies on static polymorphism, relying on minor hacks in block_cache.h to distinguish variants of Block. We still check BlockType in some places (especially for stats, which could be improved in follow-up work) but at least the BlockType is a static constant from the template parameter. (No more awkward partial redundancy between static and dynamic info.) This likely contributes to the overall performance improvement, but hasn't been tested in isolation. The other key source of simplification here is a more unified system of creating block cache objects: for directly populating from primary cache and for promotion from secondary cache. Both use BlockCreateContext, for context and for factory functions. ## block_based_table_builder.cc, cache_dump_load_impl.cc Before this change, warming caches was super ugly code. Both of these source files had switch statements to basically transition from the dynamic BlockType world to the static TBlocklike world. None of that mess is needed anymore as there's a new, untyped WarmInCache function that handles all the details just as promotion from SecondaryCache would. (Fixes `TODO akanksha: Dedup below code` in block_based_table_builder.cc.) ## Everything else Mostly just updating Cache users to use new typed APIs when reasonably possible, or changed Cache APIs when not. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10975 Test Plan: tests updated Performance test setup similar to https://github.com/facebook/rocksdb/issues/10626 (by cache size, LRUCache when not "hyper" for HyperClockCache): 34MB 1thread base.hyper -> kops/s: 0.745 io_bytes/op: 2.52504e+06 miss_ratio: 0.140906 max_rss_mb: 76.4844 34MB 1thread new.hyper -> kops/s: 0.751 io_bytes/op: 2.5123e+06 miss_ratio: 0.140161 max_rss_mb: 79.3594 34MB 1thread base -> kops/s: 0.254 io_bytes/op: 1.36073e+07 miss_ratio: 0.918818 max_rss_mb: 45.9297 34MB 1thread new -> kops/s: 0.252 io_bytes/op: 1.36157e+07 miss_ratio: 0.918999 max_rss_mb: 44.1523 34MB 32thread base.hyper -> kops/s: 7.272 io_bytes/op: 2.88323e+06 miss_ratio: 0.162532 max_rss_mb: 516.602 34MB 32thread new.hyper -> kops/s: 7.214 io_bytes/op: 2.99046e+06 miss_ratio: 0.168818 max_rss_mb: 518.293 34MB 32thread base -> kops/s: 3.528 io_bytes/op: 1.35722e+07 miss_ratio: 0.914691 max_rss_mb: 264.926 34MB 32thread new -> kops/s: 3.604 io_bytes/op: 1.35744e+07 miss_ratio: 0.915054 max_rss_mb: 264.488 233MB 1thread base.hyper -> kops/s: 53.909 io_bytes/op: 2552.35 miss_ratio: 0.0440566 max_rss_mb: 241.984 233MB 1thread new.hyper -> kops/s: 62.792 io_bytes/op: 2549.79 miss_ratio: 0.044043 max_rss_mb: 241.922 233MB 1thread base -> kops/s: 1.197 io_bytes/op: 2.75173e+06 miss_ratio: 0.103093 max_rss_mb: 241.559 233MB 1thread new -> kops/s: 1.199 io_bytes/op: 2.73723e+06 miss_ratio: 0.10305 max_rss_mb: 240.93 233MB 32thread base.hyper -> kops/s: 1298.69 io_bytes/op: 2539.12 miss_ratio: 0.0440307 max_rss_mb: 371.418 233MB 32thread new.hyper -> kops/s: 1421.35 io_bytes/op: 2538.75 miss_ratio: 0.0440307 max_rss_mb: 347.273 233MB 32thread base -> kops/s: 9.693 io_bytes/op: 2.77304e+06 miss_ratio: 0.103745 max_rss_mb: 569.691 233MB 32thread new -> kops/s: 9.75 io_bytes/op: 2.77559e+06 miss_ratio: 0.103798 max_rss_mb: 552.82 1597MB 1thread base.hyper -> kops/s: 58.607 io_bytes/op: 1449.14 miss_ratio: 0.0249324 max_rss_mb: 1583.55 1597MB 1thread new.hyper -> kops/s: 69.6 io_bytes/op: 1434.89 miss_ratio: 0.0247167 max_rss_mb: 1584.02 1597MB 1thread base -> kops/s: 60.478 io_bytes/op: 1421.28 miss_ratio: 0.024452 max_rss_mb: 1589.45 1597MB 1thread new -> kops/s: 63.973 io_bytes/op: 1416.07 miss_ratio: 0.0243766 max_rss_mb: 1589.24 1597MB 32thread base.hyper -> kops/s: 1436.2 io_bytes/op: 1357.93 miss_ratio: 0.0235353 max_rss_mb: 1692.92 1597MB 32thread new.hyper -> kops/s: 1605.03 io_bytes/op: 1358.04 miss_ratio: 0.023538 max_rss_mb: 1702.78 1597MB 32thread base -> kops/s: 280.059 io_bytes/op: 1350.34 miss_ratio: 0.023289 max_rss_mb: 1675.36 1597MB 32thread new -> kops/s: 283.125 io_bytes/op: 1351.05 miss_ratio: 0.0232797 max_rss_mb: 1703.83 Almost uniformly improving over base revision, especially for hot paths with HyperClockCache, up to 12% higher throughput seen (1597MB, 32thread, hyper). The improvement for that is likely coming from much simplified code for providing context for secondary cache promotion (CreateCallback/CreateContext), and possibly from less branching in block_based_table_reader. And likely a small improvement from not reconstituting key for DeleterFn. Reviewed By: anand1976 Differential Revision: D42417818 Pulled By: pdillinger fbshipit-source-id: f86bfdd584dce27c028b151ba56818ad14f7a432 |
2 years ago |
|
Changyu Bi
|
f24ef5d6ab |
Fix BackupEngineTest.ExcludeFiles memory leak (#11066)
Summary: Valgrind was complaining about the test BackupEngineTest.ExcludeFiles. The cause is backup_engine not being freed similar to https://github.com/facebook/rocksdb/issues/9610. ``` ==18228== Command: ./backup_engine_test --gtest_filter=BackupEngineTest.ExcludeFiles ==18228== Note: Google Test filter = BackupEngineTest.ExcludeFiles [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BackupEngineTest [ RUN ] BackupEngineTest.ExcludeFiles [ OK ] BackupEngineTest.ExcludeFiles (16264 ms) [----------] 1 test from BackupEngineTest (16273 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (16306 ms total) [ PASSED ] 1 test. ==18228== ==18228== HEAP SUMMARY: ==18228== in use at exit: 14,099 bytes in 159 blocks ==18228== total heap usage: 255,328 allocs, 255,169 frees, 497,538,546 bytes allocated ==18228== ==18228== 19 bytes in 1 blocks are possibly lost in loss record 4 of 67 ==18228== at 0x483BE63: operator new(unsigned long) (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so) ==18228== by 0x1E752D: void std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_construct<char*>(char*, char*, std::forward_iterator_tag) [clone .constprop.0] (basic_string.tcc:219) ==18228== by 0x1F1898: _M_construct_aux<char*> (basic_string.h:251) ==18228== by 0x1F1898: _M_construct<char*> (basic_string.h:270) ==18228== by 0x1F1898: basic_string (basic_string.h:455) ==18228== by 0x1F1898: construct<std::__cxx11::basic_string<char>, const std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >&> (new_allocator.h:146) ==18228== by 0x1F1898: construct<std::__cxx11::basic_string<char>, const std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >&> (alloc_traits.h:483) ==18228== by 0x1F1898: push_back (stl_vector.h:1189) ==18228== by 0x1F1898: rocksdb::(anonymous namespace)::TestFs::NewWritableFile(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, rocksdb::FileOptions const&, std::unique_ptr<rocksdb::FSWritableFile, std::default_delete<rocksdb::FSWritableFile> >*, rocksdb::IODebugContext*) (backup_engine_test.cc:208) ==18228== by 0x4B3583: rocksdb::NewWritableFile(rocksdb::FileSystem*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::unique_ptr<rocksdb::FSWritableFile, std::default_delete<rocksdb::FSWritableFile> >*, rocksdb::FileOptions const&) (read_write_util.cc:23) ==18228== by 0x31C3A8: rocksdb::DBImpl::CreateWAL(unsigned long, unsigned long, unsigned long, rocksdb::log::Writer**) (db_impl_open.cc:1752) ==18228== by 0x321A8C: rocksdb::DBImpl::Open(rocksdb::DBOptions const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::vector<rocksdb::ColumnFamilyDescriptor, std::allocator<rocksdb::ColumnFamilyDescriptor> > const&, std::vector<rocksdb::ColumnFamilyHandle*, std::allocator<rocksdb::ColumnFamilyHandle*> >*, rocksdb::DB**, bool, bool) (db_impl_open.cc:1852) ==18228== by 0x322E7F: Open (db_impl_open.cc:1660) ==18228== by 0x322E7F: rocksdb::DB::Open(rocksdb::Options const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, rocksdb::DB**) (db_impl_open.cc:1637) ==18228== by 0x1EE1CD: InitializeDBAndBackupEngine (backup_engine_test.cc:724) ==18228== by 0x1EE1CD: rocksdb::(anonymous namespace)::BackupEngineTest::OpenDBAndBackupEngine(bool, bool, rocksdb::(anonymous namespace)::BackupEngineTest::ShareOption) (backup_engine_test.cc:732) ==18228== by 0x217585: rocksdb::(anonymous namespace)::BackupEngineTest_ExcludeFiles_Test::TestBody() (backup_engine_test.cc:4232) ==18228== by 0x296143: HandleSehExceptionsInMethodIfSupported<testing::Test, void> (gtest-all.cc:3899) ==18228== by 0x296143: void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(testing::Test*, void (testing::Test::*)(), char const*) (gtest-all.cc:3935) ==18228== by 0x28A0A5: testing::Test::Run() [clone .part.0] (gtest-all.cc:3973) ==18228== by 0x28A364: Run (gtest-all.cc:3965) ==18228== by 0x28A364: testing::TestInfo::Run() [clone .part.0] (gtest-all.cc:4149) ... ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11066 Test Plan: make -j24 J=24 ROCKSDBTESTS_SUBSET=backup_engine_test valgrind_check_some Reviewed By: ajkr Differential Revision: D42297791 Pulled By: cbi42 fbshipit-source-id: db67982b27b91cc78e1a9f4a96da0cba7c9785b7 |
2 years ago |
|
Peter Dillinger
|
02f2b20864 |
Add BackupEngine feature to exclude files (#11030)
Summary:
We have a request for RocksDB to essentially support
disconnected incremental backup. In other words, if there is limited
or no connectivity to the primary backup dir, we should still be able to
take an incremental backup relative to that primary backup dir,
assuming some metadata about that primary dir is available (and
obviously anticipating primary backup dir will be fully available if
restore is needed).
To support that, this feature allows the API user to "exclude" DB
files from backup. This only applies to files that can be shared
between backups (sst and blob files), and excluded files are
tracked in the backup metadata sufficiently to ensure they are
restored at restore time. At restore time, the user provides
a set of alternate backup directories (as open BackupEngines, which
can be read-only), and excluded files must be found in one of the
backup directories ("included" in some backup).
This feature depends on backup schema version 2 features, though
schema version 2.0 support is not sufficient to read / restore a
backup with exclusions. This change updates the schema version to
2.1 because of this feature, so that it's easy to recognize whether
a RocksDB release supports this feature, while backups not using the
feature are fully compatible with 2.0.
Also in this PR:
* Stacked on https://github.com/facebook/rocksdb/pull/11029
* Allow progress_callback to be empty, not just no-op function, and
recover from exceptions thrown by BackupEngine callbacks.
* The internal-only `AsBackupEngine()` function is working around the
diamond hierarchy of `BackupEngineImplThreadSafe` to get to the
internals, without using confusing features like virtual inheritance.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11030
Test Plan: unit tests added / updated
Reviewed By: ajkr
Differential Revision: D42004388
Pulled By: pdillinger
fbshipit-source-id: 31b6e533d308a5462e528d9012d650482d974077
|
2 years ago |
|
anand76
|
c3f720c60d |
Enable ReadAsync testing and fault injection in db_stress (#11037)
Summary: The db_stress code uses a wrapper Env on top of the raw/fault injection Env. The wrapper, DbStressEnvWrapper, is a legacy Env and thus has a default implementation of ReadAsync that just does a sync read. As a result, the ReadAsync implementations of PosixFileSystem and other file systems weren't being tested. Also, the ReadAsync interface wasn't implemented in FaultInjectionTestFS. This change implements the necessary interfaces in FaultInjectionTestFS and derives DbStressEnvWrapper from FileSystemWrapper rather than EnvWrapper. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11037 Test Plan: Run db_stress standalone and crash test. With this change, db_stress is able to repro the bug fixed in https://github.com/facebook/rocksdb/issues/10890. Reviewed By: akankshamahajan15 Differential Revision: D42061290 Pulled By: anand1976 fbshipit-source-id: 7f0331fd15ee33fb4f7f0f4b22b206fe801ba074 |
2 years ago |
|
Yanqin Jin
|
c93ba7db5d |
Revise LockWAL/UnlockWAL implementation (#11020)
Summary: RocksDB has two public APIs: `DB::LockWAL()`/`DB::UnlockWAL()`. The current implementation acquires and releases the internal `DBImpl::log_write_mutex_`. According to the comment on `DBImpl::log_write_mutex_`: https://github.com/facebook/rocksdb/blob/7.8.fb/db/db_impl/db_impl.h#L2287:L2288 > Note: to avoid dealock, if needed to acquire both log_write_mutex_ and mutex_, the order should be first mutex_ and then log_write_mutex_. This puts limitations on how applications can use the `LockWAL()` API. After `LockWAL()` returns ok, then application should not perform any operation that acquires `mutex_`. Currently, the use case of `LockWAL()` is MyRocks implementing the MySQL storage engine handlerton `lock_hton_log` interface. The operation that MyRocks performs after `LockWAL()` is `GetSortedWalFiless()` which not only acquires mutex_, but also `log_write_mutex_`. There are two issues: 1. Applications using these two APIs may hang if one thread calls `GetSortedWalFiles()` after calling `LockWAL()` because log_write_mutex is not recursive. 2. Two threads may dead lock due to lock order inversion. To fix these issues, we can modify the implementation of LockWAL so that it does not keep `log_write_mutex_` held until UnlockWAL. To achieve the goal of locking the WAL, we can instead manually inject a write stall so that all future writes will be stopped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11020 Test Plan: make check Reviewed By: ajkr Differential Revision: D41785203 Pulled By: riversand963 fbshipit-source-id: 5ccb7a9c6eb9a2c3fa80fd2c399cc2568b8f89ce |
2 years ago |
|
Hui Xiao
|
98d5db5c2e |
Sort L0 files by newly introduced epoch_num (#10922)
Summary:
**Context:**
Sorting L0 files by `largest_seqno` has at least two inconvenience:
- File ingestion and compaction involving ingested files can create files of overlapping seqno range with the existing files. `force_consistency_check=true` will catch such overlap seqno range even those harmless overlap.
- For example, consider the following sequence of events ("key@n" indicates key at seqno "n")
- insert k1@1 to memtable m1
- ingest file s1 with k2@2, ingest file s2 with k3@3
- insert k4@4 to m1
- compact files s1, s2 and result in new file s3 of seqno range [2, 3]
- flush m1 and result in new file s4 of seqno range [1, 4]. And `force_consistency_check=true` will think s4 and s3 has file reordering corruption that might cause retuning an old value of k1
- However such caught corruption is a false positive since s1, s2 will not have overlapped keys with k1 or whatever inserted into m1 before ingest file s1 by the requirement of file ingestion (otherwise the m1 will be flushed first before any of the file ingestion completes). Therefore there in fact isn't any file reordering corruption.
- Single delete can decrease a file's largest seqno and ordering by `largest_seqno` can introduce a wrong ordering hence file reordering corruption
- For example, consider the following sequence of events ("key@n" indicates key at seqno "n", Credit to ajkr for this example)
- an existing SST s1 contains only k1@1
- insert k1@2 to memtable m1
- ingest file s2 with k3@3, ingest file s3 with k4@4
- insert single delete k5@5 in m1
- flush m1 and result in new file s4 of seqno range [2, 5]
- compact s1, s2, s3 and result in new file s5 of seqno range [1, 4]
- compact s4 and result in new file s6 of seqno range [2] due to single delete
- By the last step, we have file ordering by largest seqno (">" means "newer") : s5 > s6 while s6 contains a newer version of the k1's value (i.e, k1@2) than s5, which is a real reordering corruption. While this can be caught by `force_consistency_check=true`, there isn't a good way to prevent this from happening if ordering by `largest_seqno`
Therefore, we are redesigning the sorting criteria of L0 files and avoid above inconvenience. Credit to ajkr , we now introduce `epoch_num` which describes the order of a file being flushed or ingested/imported (compaction output file will has the minimum `epoch_num` among input files'). This will avoid the above inconvenience in the following ways:
- In the first case above, there will no longer be overlap seqno range check in `force_consistency_check=true` but `epoch_number` ordering check. This will result in file ordering s1 < s2 < s4 (pre-compaction) and s3 < s4 (post-compaction) which won't trigger false positive corruption. See test class `DBCompactionTestL0FilesMisorderCorruption*` for more.
- In the second case above, this will result in file ordering s1 < s2 < s3 < s4 (pre-compacting s1, s2, s3), s5 < s4 (post-compacting s1, s2, s3), s5 < s6 (post-compacting s4), which are correct file ordering without causing any corruption.
**Summary:**
- Introduce `epoch_number` stored per `ColumnFamilyData` and sort CF's L0 files by their assigned `epoch_number` instead of `largest_seqno`.
- `epoch_number` is increased and assigned upon `VersionEdit::AddFile()` for flush (or similarly for WriteLevel0TableForRecovery) and file ingestion (except for allow_behind_true, which will always get assigned as the `kReservedEpochNumberForFileIngestedBehind`)
- Compaction output file is assigned with the minimum `epoch_number` among input files'
- Refit level: reuse refitted file's epoch_number
- Other paths needing `epoch_number` treatment:
- Import column families: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`
- Repair: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`.
- Assigning new epoch_number to a file and adding this file to LSM tree should be atomic. This is guaranteed by us assigning epoch_number right upon `VersionEdit::AddFile()` where this version edit will be apply to LSM tree shape right after by holding the db mutex (e.g, flush, file ingestion, import column family) or by there is only 1 ongoing edit per CF (e.g, WriteLevel0TableForRecovery, Repair).
- Assigning the minimum input epoch number to compaction output file won't misorder L0 files (even through later `Refit(target_level=0)`). It's due to for every key "k" in the input range, a legit compaction will cover a continuous epoch number range of that key. As long as we assign the key "k" the minimum input epoch number, it won't become newer or older than the versions of this key that aren't included in this compaction hence no misorder.
- Persist `epoch_number` of each file in manifest and recover `epoch_number` on db recovery
- Backward compatibility with old db without `epoch_number` support is guaranteed by assigning `epoch_number` to recovered files by `NewestFirstBySeqno` order. See `VersionStorageInfo::RecoverEpochNumbers()` for more
- Forward compatibility with manifest is guaranteed by flexibility of `NewFileCustomTag`
- Replace `force_consistent_check` on L0 with `epoch_number` and remove false positive check like case 1 with `largest_seqno` above
- Due to backward compatibility issue, we might encounter files with missing epoch number at the beginning of db recovery. We will still use old L0 sorting mechanism (`NewestFirstBySeqno`) to check/sort them till we infer their epoch number. See usages of `EpochNumberRequirement`.
- Remove fix https://github.com/facebook/rocksdb/pull/5958#issue-511150930 and their outdated tests to file reordering corruption because such fix can be replaced by this PR.
- Misc:
- update existing tests with `epoch_number` so make check will pass
- update https://github.com/facebook/rocksdb/pull/5958#issue-511150930 tests to verify corruption is fixed using `epoch_number` and cover universal/fifo compaction/CompactRange/CompactFile cases
- assert db_mutex is held for a few places before calling ColumnFamilyData::NewEpochNumber()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10922
Test Plan:
- `make check`
- New unit tests under `db/db_compaction_test.cc`, `db/db_test2.cc`, `db/version_builder_test.cc`, `db/repair_test.cc`
- Updated tests (i.e, `DBCompactionTestL0FilesMisorderCorruption*`) under https://github.com/facebook/rocksdb/pull/5958#issue-511150930
- [Ongoing] Compatibility test: manually run
|
2 years ago |
|
Peter Dillinger
|
9b34c097a1 |
Fix bug updating latest backup on delete (#11029)
Summary: Previously, the "latest" valid backup would not be updated on delete. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11029 Test Plan: unit test included (added to an existing test for efficiency) Reviewed By: hx235 Differential Revision: D41967925 Pulled By: pdillinger fbshipit-source-id: ca143354d281eb979557ea421902cd26803a1137 |
2 years ago |
|
Peter Dillinger
|
e079d562af |
Add a SecondaryCache::InsertSaved() API, use in CacheDumper impl (#10945)
Summary: Can simplify some ugly code in cache_dump_load_impl.cc by having an API in SecondaryCache that can directly consume persisted data. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10945 Test Plan: existing tests for CacheDumper, added basic unit test Reviewed By: anand1976 Differential Revision: D41231497 Pulled By: pdillinger fbshipit-source-id: b8ec993ef7d3e7efd68aae8602fd3f858da58068 |
2 years ago |
|
Levi Tamasi
|
fbd9077d66 |
Fix a bug where GetContext does not update READ_NUM_MERGE_OPERANDS (#10925)
Summary: The patch fixes a bug where `GetContext::Merge` (and `MergeEntity`) does not update the ticker `READ_NUM_MERGE_OPERANDS` because it implicitly uses the default parameter value of `update_num_ops_stats=false` when calling `MergeHelper::TimedFullMerge`. Also, to prevent such issues going forward, the PR removes the default parameter values from the `TimedFullMerge` methods. In addition, it removes an unused/unnecessary parameter from `TimedFullMergeWithEntity`, and does some cleanup at the call sites of these methods. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10925 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D41096453 Pulled By: ltamasi fbshipit-source-id: fc60646d32b4d516b8fe81e265c3f020a32fd7f8 |
2 years ago |
|
Yanqin Jin
|
75aca74017 |
Replace member variable lambda with methods (#10924)
Summary: In transaction unit tests, replace a few member variable lambdas with non-static methods. It's easier for gdb to work with variables in methods than in lambdas. (Seen similar things to https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86675). Pull Request resolved: https://github.com/facebook/rocksdb/pull/10924 Test Plan: make check Reviewed By: jay-zhuang Differential Revision: D41072241 Pulled By: riversand963 fbshipit-source-id: e4fa491de573c4656225a86a75af926c1df827f6 |
2 years ago |
|
Yanqin Jin
|
0547cecb81 |
Reduce access to atomic variables in a test (#10909)
Summary: With TSAN build on CircleCI (see mini-tsan in .circleci/config). Sometimes `SeqAdvanceConcurrentTest.SeqAdvanceConcurrent` will get stuck when an experimental feature called "unordered write" is enabled. Stack trace will be the following ``` Thread 7 (Thread 0x7f2284a1c700 (LWP 481523) "write_prepared_"): #0 0x00000000004fa3f5 in __tsan_atomic64_load () at ./db/merge_context.h:15 https://github.com/facebook/rocksdb/issues/1 0x00000000005e5942 in std::__atomic_base<unsigned long>::load (this=0x7b74000012f8, __m=std::memory_order_seq_cst) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/atomic_base.h:481 https://github.com/facebook/rocksdb/issues/2 std::__atomic_base<unsigned long>::operator unsigned long (this=0x7b74000012f8) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/atomic_base.h:341 https://github.com/facebook/rocksdb/issues/3 0x00000000005bf001 in rocksdb::SeqAdvanceConcurrentTest_SeqAdvanceConcurrent_Test::TestBody()::$_9::operator()(void*) const (this=0x7b14000085e8) at utilities/transactions/write_prepared_transaction_test.cc:1702 Thread 6 (Thread 0x7f228421b700 (LWP 481521) "write_prepared_"): #0 0x000000000052178c in __tsan::MetaMap::GetAndLock(__tsan::ThreadState*, unsigned long, unsigned long, bool, bool) () at ./db/merge_context.h:15 https://github.com/facebook/rocksdb/issues/1 0x00000000004fa48e in __tsan_atomic64_load () at ./db/merge_context.h:15 https://github.com/facebook/rocksdb/issues/2 0x00000000005e5942 in std::__atomic_base<unsigned long>::load (this=0x7b74000012f8, __m=std::memory_order_seq_cst) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/atomic_base.h:481 https://github.com/facebook/rocksdb/issues/3 std::__atomic_base<unsigned long>::operator unsigned long (this=0x7b74000012f8) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/atomic_base.h:341 https://github.com/facebook/rocksdb/issues/4 0x00000000005bf001 in rocksdb::SeqAdvanceConcurrentTest_SeqAdvanceConcurrent_Test::TestBody()::$_9::operator()(void*) const (this=0x7b14000085e8) at utilities/transactions/write_prepared_transaction_test.cc:1702 ``` This is problematic and suspicious. Two threads will get stuck in the same place trying to load from an atomic variable. https://github.com/facebook/rocksdb/blob/7.8.fb/utilities/transactions/write_prepared_transaction_test.cc#L1694:L1707. Not sure why two threads can reach the same point. The stack trace shows that there may be a deadlock, since the two threads are on the same write thread (one is doing Prepare, while the other is trying to commit). Pull Request resolved: https://github.com/facebook/rocksdb/pull/10909 Test Plan: On CircleCI mini-tsan, apply a patch first so that we have a higher chance of hitting the same problematic situation, ``` diff --git a/utilities/transactions/write_prepared_transaction_test.cc b/utilities/transactions/write_prepared_transaction_test.cc index 4bc1f3744..bd5dc4924 100644 --- a/utilities/transactions/write_prepared_transaction_test.cc +++ b/utilities/transactions/write_prepared_transaction_test.cc @@ -1714,13 +1714,13 @@ TEST_P(SeqAdvanceConcurrentTest, SeqAdvanceConcurrent) { size_t d = (n % base[bi + 1]) / base[bi]; switch (d) { case 0: - threads.emplace_back(txn_t0, bi); + threads.emplace_back(txn_t3, bi); break; case 1: - threads.emplace_back(txn_t1, bi); + threads.emplace_back(txn_t3, bi); break; case 2: - threads.emplace_back(txn_t2, bi); + threads.emplace_back(txn_t3, bi); break; case 3: threads.emplace_back(txn_t3, bi); ``` then build and run tests ``` COMPILE_WITH_TSAN=1 CC=clang-13 CXX=clang++-13 ROCKSDB_DISABLE_ALIGNED_NEW=1 USE_CLANG=1 make V=1 -j32 check gtest-parallel -r 100 ./write_prepared_transaction_test --gtest_filter=TwoWriteQueues/SeqAdvanceConcurrentTest.SeqAdvanceConcurrent/19 ``` In the above, `SeqAdvanceConcurrent/19`. The tests 10 to 19 correspond to unordered write in which Prepare() and Commit() can both enter the same write thread. Before this PR, there is a high chance of hitting the deadlock. With this PR, no deadlock has been encountered so far. Reviewed By: ltamasi Differential Revision: D40869387 Pulled By: riversand963 fbshipit-source-id: 81e82a70c263e4f3417597a201b081ee54f1deab |
2 years ago |
|
Yanqin Jin
|
7d26e4c5a3 |
Basic Support for Merge with user-defined timestamp (#10819)
Summary:
This PR implements the originally disabled `Merge()` APIs when user-defined timestamp is enabled.
Simplest usage:
```cpp
// assume string append merge op is used with '.' as delimiter.
// ts1 < ts2
db->Put(WriteOptions(), "key", ts1, "v0");
db->Merge(WriteOptions(), "key", ts2, "1");
ReadOptions ro;
ro.timestamp = &ts2;
db->Get(ro, "key", &value);
ASSERT_EQ("v0.1", value);
```
Some code comments are added for clarity.
Note: support for timestamp in `DB::GetMergeOperands()` will be done in a follow-up PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10819
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D40603195
Pulled By: riversand963
fbshipit-source-id: f96d6f183258f3392d80377025529f7660503013
|
2 years ago |
|
Yanqin Jin
|
900f79126d |
Pass `const LockInfo&` to AcquireLocked() and AcquireWithTimeout (#10874)
Summary: The motivation and benefit of current behavior of passing `LockInfo&&` as argument to AcquireLocked() and AcquireWithTimeout() is not clear to me. Furthermore, in AcquireWithTimeout(), we access members of `LockInfo&&` after it is passed to AcquireLocked() as rvalue ref. In addition, we may call `AcquireLocked()` with `std::move(lock_info)` multiple times. This leads to linter warning of use-after-move. If future implementation of AcquireLocked() does something like moving-construct a new `LockedInfo` using the passed-in `LockInfo&&`, then the caller cannot use it because `LockInfo` has a member of type `autovector`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10874 Test Plan: make check Reviewed By: ltamasi Differential Revision: D40704210 Pulled By: riversand963 fbshipit-source-id: 20091df65b4fc63b072bcec9809efc49955d6d35 |
2 years ago |
|
Yanqin Jin
|
95a1935cb1 |
Run clang-format on utilities/transactions (#10871)
Summary: This PR is the result of running the following command ``` find ./utilities/transactions/ -name '*.cc' -o -name '*.h' -o -name '*.c' -o -name '*.hpp' -o -name '*.cpp' | xargs clang-format -i ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/10871 Test Plan: make check Reviewed By: cbi42 Differential Revision: D40686871 Pulled By: riversand963 fbshipit-source-id: 613738d667ec8f8e13cce4802e0e166d6be52211 |
2 years ago |
|
Levi Tamasi
|
4d9cb433fa |
Run clang-format on utilities/ (except utilities/transactions/) (#10853)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10853 Test Plan: `make check` Reviewed By: siying Differential Revision: D40651315 Pulled By: ltamasi fbshipit-source-id: 8b270ff4777a06464be86e376c2a680427866a46 |
2 years ago |
|
akankshamahajan
|
0e7b27bfcf |
Refactor block cache tracing APIs (#10811)
Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282 |
2 years ago |
|
Peter Dillinger
|
e466173d5c |
Print stack traces on frozen tests in CI (#10828)
Summary: Instead of existing calls to ps from gnu_parallel, call a new wrapper that does ps, looks for unit test like processes, and uses pstack or gdb to print thread stack traces. Also, using `ps -wwf` instead of `ps -wf` ensures output is not cut off. For security, CircleCI runs with security restrictions on ptrace (/proc/sys/kernel/yama/ptrace_scope = 1), and this change adds a work-around to `InstallStackTraceHandler()` (only used by testing tools) to allow any process from the same user to debug it. (I've also touched >100 files to ensure all the unit tests call this function.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/10828 Test Plan: local manual + temporary infinite loop in a unit test to observe in CircleCI Reviewed By: hx235 Differential Revision: D40447634 Pulled By: pdillinger fbshipit-source-id: 718a4c4a5b54fa0f9af2d01a446162b45e5e84e1 |
2 years ago |
|
Peter Dillinger
|
2d0380adbe |
Allow manifest fix-up without requiring prior state (#10796)
Summary: This change is motivated by ensuring that `ldb update_manifest` or `UpdateManifestForFilesState` can run without expecting files to open when the old temperature is provided (in case the FileSystem strictly interprets non-kUnknown), but ended up fixing a problem in `OfflineManifestWriter` (used by `ldb unsafe_remove_sst_file`) where it would open some SST files during recovery and expect them to match the prior manifest state, even if not required by the intended new state. Also update BackupEngine to retry with Temperature kUnknown when reading file with potentially "wrong" temperature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10796 Test Plan: tests added/updated, that fail before the change(s) and now pass Reviewed By: jay-zhuang Differential Revision: D40232645 Pulled By: jay-zhuang fbshipit-source-id: b5aa2688aecfe0c320b80a7da689b315414c20be |
2 years ago |
|
gitbw95
|
47b57a3731 |
add SetCapacity and GetCapacity for secondary cache (#10712)
Summary: To support tuning secondary cache dynamically, add `SetCapacity()` and `GetCapacity()` for CompressedSecondaryCache. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10712 Test Plan: Unit Tests Reviewed By: anand1976 Differential Revision: D39685212 Pulled By: gitbw95 fbshipit-source-id: 19573c67237011927320207732b5de083cb87240 |
2 years ago |
|
Yanqin Jin
|
7045b74b47 |
Remove timestamp before inserting to WBWI's index (#10742)
Summary: Currently, this original behavior should not lead to incorrect result, but will violate the contract of CompareWithTimestamp() that when a_has_ts or b_has_ts is false, the slice does not include timestamp. Resolves https://github.com/facebook/rocksdb/issues/10709 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10742 Test Plan: make check Reviewed By: ltamasi Differential Revision: D39834096 Pulled By: riversand963 fbshipit-source-id: c597600f5a7820734f07d0926cdc224cea5eabe1 |
2 years ago |
|
Yanqin Jin
|
07249fea8f |
Fix DBImpl::GetLatestSequenceForKey() for Merge (#10724)
Summary: Currently, without this fix, DBImpl::GetLatestSequenceForKey() may not return the latest sequence number for merge operands of the key. This can cause conflict checking during optimistic transaction commit phase to fail. Fix it by always returning the latest sequence number of the key, also considering range tombstones. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10724 Test Plan: make check Reviewed By: cbi42 Differential Revision: D39756847 Pulled By: riversand963 fbshipit-source-id: 0764c3dd4cb24960b37e18adccc6e7feed0e6876 |
2 years ago |
|
Peter Dillinger
|
ef443cead4 |
Refactor to avoid confusing "raw block" (#10408)
Summary: We have a lot of confusing code because of mixed, sometimes completely opposite uses of of the term "raw block" or "raw contents", sometimes within the same source file. For example, in `BlockBasedTableBuilder`, `raw_block_contents` and `raw_size` generally referred to uncompressed block contents and size, while `WriteRawBlock` referred to writing a block that is already compressed if it is going to be. Meanwhile, in `BlockBasedTable`, `raw_block_contents` either referred to a (maybe compressed) block with trailer, or a maybe compressed block maybe without trailer. (Note: left as follow-up work to use C++ typing to better sort out the various kinds of BlockContents.) This change primarily tries to apply some consistent terminology around the kinds of block representations, avoiding the unclear "raw". (Any meaning of "raw" assumes some bias toward the storage layer or toward the logical data layer.) Preferred terminology: * **Serialized block** - bytes that go into storage. For block-based table (usually the case) this includes the block trailer. WART: block `size` may or may not include the trailer; need to be clear about whether it does or not. * **Maybe compressed block** - like a serialized block, but without the trailer (or no promise of including a trailer). Must be accompanied by a CompressionType. * **Uncompressed block** - "payload" bytes that are either stored with no compression, used as input to compression function, or result of decompression function. * **Parsed block** - an in-memory form of a block in block cache, as it is used by the table reader. Different C++ types are used depending on the block type (see block_like_traits.h). Other refactorings: * Misc corrections/improvements of internal API comments * Remove a few misleading / unhelpful / redundant comments. * Use move semantics in some places to simplify contracts * Use better parameter names to indicate which parameters are used for outputs * Remove some extraneous `extern` * Various clean-ups to `CacheDumperImpl` (mostly unnecessary code) Pull Request resolved: https://github.com/facebook/rocksdb/pull/10408 Test Plan: existing tests Reviewed By: akankshamahajan15 Differential Revision: D38172617 Pulled By: pdillinger fbshipit-source-id: ccb99299f324ac5ca46996d34c5089621a4f260c |
2 years ago |
|
Bo Wang
|
b418ace352 |
Disable PersistentCacheTierTest.BasicTest (#10683)
Summary: Disable this flaky test since PersistentCache is not used. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10683 Test Plan: Unit Tests Reviewed By: cbi42 Differential Revision: D39545974 Pulled By: gitbw95 fbshipit-source-id: ac53e96f6ba880e7612e325eb5ff22ee2799efed |
2 years ago |
|
Yanqin Jin
|
832fd644fc |
Reset pessimistic transaction's read/commit timestamps during Initialize() (#10677)
Summary:
RocksDB allows reusing old `Transaction` objects when creating new ones. Therefore, we need to
reset the transaction's read and commit timestamps back to default values `kMaxTxnTimestamp`.
Otherwise, `CommitAndTryCreateSnapshot()` may fail with "Status::InvalidArgument("Different commit ts specified")".
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10677
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D39513543
Pulled By: riversand963
fbshipit-source-id: bea01cac149bff3a23a2978fc0c3b198243a6291
|
2 years ago |
|
Peter Dillinger
|
6de7081cf3 |
Always verify SST unique IDs on SST file open (#10532)
Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2 |
2 years ago |
|
Bo Wang
|
d490bfcdb6 |
Avoid recompressing cold block in CompressedSecondaryCache (#10527)
Summary:
**Summary:**
When a block is firstly `Lookup` from the secondary cache, we just insert a dummy block in the primary cache (charging the actual size of the block) and don’t erase the block from the secondary cache. A standalone handle is returned from `Lookup`. Only if the block is hit again, we erase it from the secondary cache and add it into the primary cache.
When a block is firstly evicted from the primary cache to the secondary cache, we just insert a dummy block (size 0) in the secondary cache. When the block is evicted again, it is treated as a hot block and is inserted into the secondary cache.
**Implementation Details**
Add a new state of LRUHandle: The handle is never inserted into the LRUCache (both hash table and LRU list) and it doesn't experience the above three states. The entry can be freed when refs becomes 0. (refs >= 1 && in_cache == false && IS_STANDALONE == true)
The behaviors of `LRUCacheShard::Lookup()` are updated if the secondary_cache is CompressedSecondaryCache:
1. If a handle is found in primary cache:
1.1. If the handle's value is not nullptr, it is returned immediately.
1.2. If the handle's value is nullptr, this means the handle is a dummy one. For a dummy handle, if it was retrieved from secondary cache, it may still exist in secondary cache.
- 1.2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
- 1.2.2. If the handle from secondary cache is valid, erase it from the secondary cache and add it into the primary cache.
2. If a handle is not found in primary cache:
2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
2.2. If the handle from secondary cache is valid, insert a dummy block in the primary cache (charging the actual size of the block) and return a standalone handle.
The behaviors of `LRUCacheShard::Promote()` are updated as follows:
1. If `e->sec_handle` has value, one of the following steps can happen:
1.1. Insert a dummy handle and return a standalone handle to caller when `secondary_cache_` is `CompressedSecondaryCache` and e is a standalone handle.
1.2. Insert the item into the primary cache and return the handle to caller.
1.3. Exception handling.
3. If `e->sec_handle` has no value, mark the item as not in cache and charge the cache as its only metadata that'll shortly be released.
The behavior of `CompressedSecondaryCache::Insert()` is updated:
1. If a block is evicted from the primary cache for the first time, a dummy item is inserted.
4. If a dummy item is found for a block, the block is inserted into the secondary cache.
The behavior of `CompressedSecondaryCache:::Lookup()` is updated:
1. If a handle is not found or it is a dummy item, a nullptr is returned.
2. If `erase_handle` is true, the handle is erased.
The behaviors of `LRUCacheShard::Release()` are adjusted for the standalone handles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10527
Test Plan:
1. stress tests.
5. unit tests.
6. CPU profiling for db_bench.
Reviewed By: siying
Differential Revision: D38747613
Pulled By: gitbw95
fbshipit-source-id: 74a1eba7e1957c9affb2bd2ae3e0194584fa6eca
|
2 years ago |
|
Changyu Bi
|
30bc495c03 |
Skip swaths of range tombstone covered keys in merging iterator (2022 edition) (#10449)
Summary: Delete range logic is moved from `DBIter` to `MergingIterator`, and `MergingIterator` will seek to the end of a range deletion if possible instead of scanning through each key and check with `RangeDelAggregator`. With the invariant that a key in level L (consider memtable as the first level, each immutable and L0 as a separate level) has a larger sequence number than all keys in any level >L, a range tombstone `[start, end)` from level L covers all keys in its range in any level >L. This property motivates optimizations in iterator: - in `Seek(target)`, if level L has a range tombstone `[start, end)` that covers `target.UserKey`, then for all levels > L, we can do Seek() on `end` instead of `target` to skip some range tombstone covered keys. - in `Next()/Prev()`, if the current key is covered by a range tombstone `[start, end)` from level L, we can do `Seek` to `end` for all levels > L. This PR implements the above optimizations in `MergingIterator`. As all range tombstone covered keys are now skipped in `MergingIterator`, the range tombstone logic is removed from `DBIter`. The idea in this PR is similar to https://github.com/facebook/rocksdb/issues/7317, but this PR leaves `InternalIterator` interface mostly unchanged. **Credit**: the cascading seek optimization and the sentinel key (discussed below) are inspired by [Pebble](https://github.com/cockroachdb/pebble/blob/master/merging_iter.go) and suggested by ajkr in https://github.com/facebook/rocksdb/issues/7317. The two optimizations are mostly implemented in `SeekImpl()/SeekForPrevImpl()` and `IsNextDeleted()/IsPrevDeleted()` in `merging_iterator.cc`. See comments for each method for more detail. One notable change is that the minHeap/maxHeap used by `MergingIterator` now contains range tombstone end keys besides point key iterators. This helps to reduce the number of key comparisons. For example, for a range tombstone `[start, end)`, a `start` and an `end` `HeapItem` are inserted into the heap. When a `HeapItem` for range tombstone start key is popped from the minHeap, we know this range tombstone becomes "active" in the sense that, before the range tombstone's end key is popped from the minHeap, all the keys popped from this heap is covered by the range tombstone's internal key range `[start, end)`. Another major change, *delete range sentinel key*, is made to `LevelIterator`. Before this PR, when all point keys in an SST file are iterated through in `MergingIterator`, a level iterator would advance to the next SST file in its level. In the case when an SST file has a range tombstone that covers keys beyond the SST file's last point key, advancing to the next SST file would lose this range tombstone. Consequently, `MergingIterator` could return keys that should have been deleted by some range tombstone. We prevent this by pretending that file boundaries in each SST file are sentinel keys. A `LevelIterator` now only advance the file iterator once the sentinel key is processed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10449 Test Plan: - Added many unit tests in db_range_del_test - Stress test: `./db_stress --readpercent=5 --prefixpercent=19 --writepercent=20 -delpercent=10 --iterpercent=44 --delrangepercent=2` - Additional iterator stress test is added to verify against iterators against expected state: https://github.com/facebook/rocksdb/issues/10538. This is based on ajkr's previous attempt https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913. ``` python3 ./tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --compression_type=none --max_background_compactions=8 --value_size_mult=33 --max_key=5000000 --interval=10 --duration=7200 --delrangepercent=3 --delpercent=9 --iterpercent=25 --writepercent=60 --readpercent=3 --prefixpercent=0 --num_iterations=1000 --range_deletion_width=100 --verify_iterator_with_expected_state_one_in=1 ``` - Performance benchmark: I used a similar setup as in the blog [post](http://rocksdb.org/blog/2018/11/21/delete-range.html) that introduced DeleteRange, "a database with 5 million data keys, and 10000 range tombstones (ignoring those dropped during compaction) that were written in regular intervals after 4.5 million data keys were written". As expected, the performance with this PR depends on the range tombstone width. ``` # Setup: TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=fillrandom --writes=4500000 --num=5000000 TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=overwrite --writes=500000 --num=5000000 --use_existing_db=true --writes_per_range_tombstone=50 # Scan entire DB TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=readseq[-X5] --use_existing_db=true --num=5000000 --disable_auto_compactions=true # Short range scan (10 Next()) TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=100000 --seek_nexts=10 --disable_auto_compactions=true # Long range scan(1000 Next()) TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=2500 --seek_nexts=1000 --disable_auto_compactions=true ``` Avg over of 10 runs (some slower tests had fews runs): For the first column (tombstone), 0 means no range tombstone, 100-10000 means width of the 10k range tombstones, and 1 means there is a single range tombstone in the entire DB (width is 1000). The 1 tombstone case is to test regression when there's very few range tombstones in the DB, as no range tombstone is likely to take a different code path than with range tombstones. - Scan entire DB | tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% | | ------------- | ------------- | ------------- | ------------- | | 0 range tombstone |2525600 (± 43564) |2486917 (± 33698) |-1.53% | | 100 |1853835 (± 24736) |2073884 (± 32176) |+11.87% | | 1000 |422415 (± 7466) |1115801 (± 22781) |+164.15% | | 10000 |22384 (± 227) |227919 (± 6647) |+918.22% | | 1 range tombstone |2176540 (± 39050) |2434954 (± 24563) |+11.87% | - Short range scan | tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% | | ------------- | ------------- | ------------- | ------------- | | 0 range tombstone |35398 (± 533) |35338 (± 569) |-0.17% | | 100 |28276 (± 664) |31684 (± 331) |+12.05% | | 1000 |7637 (± 77) |25422 (± 277) |+232.88% | | 10000 |1367 |28667 |+1997.07% | | 1 range tombstone |32618 (± 581) |32748 (± 506) |+0.4% | - Long range scan | tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% | | ------------- | ------------- | ------------- | ------------- | | 0 range tombstone |2262 (± 33) |2353 (± 20) |+4.02% | | 100 |1696 (± 26) |1926 (± 18) |+13.56% | | 1000 |410 (± 6) |1255 (± 29) |+206.1% | | 10000 |25 |414 |+1556.0% | | 1 range tombstone |1957 (± 30) |2185 (± 44) |+11.65% | - Microbench does not show significant regression: https://gist.github.com/cbi42/59f280f85a59b678e7e5d8561e693b61 Reviewed By: ajkr Differential Revision: D38450331 Pulled By: cbi42 fbshipit-source-id: b5ef12e8d8c289ed2e163ccdf277f5039b511fca |
2 years ago |
|
sdong
|
9509003503 |
Option migration tool to break down files for FIFO compaction (#10600)
Summary: Right now, when the option migration tool migrates to FIFO compaction, it compacts all the data into one single SST file and move to L0. Although it creates a valid LSM-tree for FIFO, for any data to be deleted for FIFO, the giant file will be deleted, which might make the DB almost empty. There is not good solution for it, because usually we don't have enough information to reconstruct the FIFO LSM-tree. This change changes to a solution that compromises the FIFO condition. We hope the solution is more useable. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10600 Test Plan: Add unit tests for that. Reviewed By: jay-zhuang Differential Revision: D39106424 fbshipit-source-id: bdfd852c3b343373765b8d9716fefc08fd27145c |
2 years ago |
|
Peter Dillinger
|
c5afbbfe4b |
Don't wait for indirect flush in read-only DB (#10569)
Summary: Some APIs for getting live files, which are used by Checkpoint and BackupEngine, can optionally trigger and wait for a flush. These would deadlock when used on a read-only DB. Here we fix that by assuming the user wants the overall operation to succeed and is OK without flushing (because the DB is read-only). Follow-up work: the same or other issues can be hit by directly invoking some DB functions that are clearly not appropriate for read-only instance, but are not covered by overrides in DBImplReadOnly and CompactedDBImpl. These should be fixed to avoid similar problems on accidental misuse. (Long term, it would be nice to have a DBReadOnly class without those members, like BackupEngineReadOnly.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/10569 Test Plan: tests updated to catch regression (hang before the fix) Reviewed By: riversand963 Differential Revision: D38995759 Pulled By: pdillinger fbshipit-source-id: f5f8bc7123e13cb45bd393dd974d7d6eda20bc68 |
2 years ago |
|
Hui Xiao
|
b16655a547 |
Add missing synchronization in TestFSWritableFile (#10544)
Summary: **Context:** ajkr's command revealed an existing TSAN data race between `TestFSWritableFile::Append` and `TestFSWritableFile::Sync` on `TestFSWritableFile::state_` ``` $ make clean && COMPILE_WITH_TSAN=1 make -j56 db_stress $ python3 tools/db_crashtest.py blackbox --simple --duration=3600 --interval=10 --sync_fault_injection=1 --disable_wal=0 --max_key=10000 --checkpoint_one_in=1000 ``` The race is due to concurrent access from [checkpoint's WAL sync](https://github.com/facebook/rocksdb/blob/7.4.fb/utilities/fault_injection_fs.cc#L324) and [db put's WAL write when ‘sync_fault_injection=1 ‘](https://github.com/facebook/rocksdb/blob/7.4.fb/utilities/fault_injection_fs.cc#L208) to the `state_` on the same WAL `TestFSWritableFile` under the missing synchronization. ``` WARNING: ThreadSanitizer: data race (pid=11275) Write of size 8 at 0x7b480003d850 by thread T23 (mutexes: write M69230): #0 rocksdb::TestFSWritableFile::Sync(rocksdb::IOOptions const&, rocksdb::IODebugContext*) internal_repo_rocksdb/repo/utilities/fault_injection_fs.cc:297 (db_stress+0x716004) https://github.com/facebook/rocksdb/issues/1 rocksdb::(anonymous namespace)::CompositeWritableFileWrapper::Sync() internal_repo_rocksdb/repo/env/composite_env.cc:154 (db_stress+0x4dfa78) https://github.com/facebook/rocksdb/issues/2 rocksdb::(anonymous namespace)::LegacyWritableFileWrapper::Sync(rocksdb::IOOptions const&, rocksdb::IODebugContext*) internal_repo_rocksdb/repo/env/env.cc:280 (db_stress+0x6dfd24) https://github.com/facebook/rocksdb/issues/3 rocksdb::WritableFileWriter::SyncInternal(bool) internal_repo_rocksdb/repo/file/writable_file_writer.cc:460 (db_stress+0xa1b98c) https://github.com/facebook/rocksdb/issues/4 rocksdb::WritableFileWriter::SyncWithoutFlush(bool) internal_repo_rocksdb/repo/file/writable_file_writer.cc:435 (db_stress+0xa1e441) https://github.com/facebook/rocksdb/issues/5 rocksdb::DBImpl::SyncWAL() internal_repo_rocksdb/repo/db/db_impl/db_impl.cc:1385 (db_stress+0x529458) https://github.com/facebook/rocksdb/issues/6 rocksdb::DBImpl::FlushWAL(bool) internal_repo_rocksdb/repo/db/db_impl/db_impl.cc:1339 (db_stress+0x54f82a) https://github.com/facebook/rocksdb/issues/7 rocksdb::DBImpl::GetLiveFilesStorageInfo(rocksdb::LiveFilesStorageInfoOptions const&, std::vector<rocksdb::LiveFileStorageInfo, std::allocator<rocksdb::LiveFileStorageInfo> >*) internal_repo_rocksdb/repo/db/db_filesnapshot.cc:387 (db_stress+0x5c831d) https://github.com/facebook/rocksdb/issues/8 rocksdb::CheckpointImpl::CreateCustomCheckpoint(std::function<rocksdb::Status (std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, rocksdb::FileType)>, std::function<rocksdb::Status (std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, unsigned long, rocksdb::FileType, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, rocksdb::Temperature)>, std::function<rocksdb::Status (std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, rocksdb::FileType)>, unsigned long*, unsigned long, bool) internal_repo_rocksdb/repo/utilities/checkpoint/checkpoint_impl.cc:214 (db_stress+0x4c0343) https://github.com/facebook/rocksdb/issues/9 rocksdb::CheckpointImpl::CreateCheckpoint(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, unsigned long, unsigned long*) internal_repo_rocksdb/repo/utilities/checkpoint/checkpoint_impl.cc:123 (db_stress+0x4c237e) https://github.com/facebook/rocksdb/issues/10 rocksdb::StressTest::TestCheckpoint(rocksdb::ThreadState*, std::vector<int, std::allocator<int> > const&, std::vector<long, std::allocator<long> > const&) internal_repo_rocksdb/repo/db_stress_tool/db_stress_test_base.cc:1699 (db_stress+0x328340) https://github.com/facebook/rocksdb/issues/11 rocksdb::StressTest::OperateDb(rocksdb::ThreadState*) internal_repo_rocksdb/repo/db_stress_tool/db_stress_test_base.cc:825 (db_stress+0x33921f) https://github.com/facebook/rocksdb/issues/12 rocksdb::ThreadBody(void*) internal_repo_rocksdb/repo/db_stress_tool/db_stress_driver.cc:33 (db_stress+0x354857) https://github.com/facebook/rocksdb/issues/13 rocksdb::(anonymous namespace)::StartThreadWrapper(void*) internal_repo_rocksdb/repo/env/env_posix.cc:447 (db_stress+0x6eb2ad) Previous read of size 8 at 0x7b480003d850 by thread T64 (mutexes: write M980798978697532600, write M253744503184415024, write M1262): #0 memcpy <null> (db_stress+0xbc9696) https://github.com/facebook/rocksdb/issues/1 operator= internal_repo_rocksdb/repo/utilities/fault_injection_fs.h:35 (db_stress+0x70d5f1) https://github.com/facebook/rocksdb/issues/2 rocksdb::FaultInjectionTestFS::WritableFileAppended(rocksdb::FSFileState const&) internal_repo_rocksdb/repo/utilities/fault_injection_fs.cc:827 (db_stress+0x70d5f1) https://github.com/facebook/rocksdb/issues/3 rocksdb::TestFSWritableFile::Append(rocksdb::Slice const&, rocksdb::IOOptions const&, rocksdb::IODebugContext*) internal_repo_rocksdb/repo/utilities/fault_injection_fs.cc:173 (db_stress+0x7143af) https://github.com/facebook/rocksdb/issues/4 rocksdb::(anonymous namespace)::CompositeWritableFileWrapper::Append(rocksdb::Slice const&) internal_repo_rocksdb/repo/env/composite_env.cc:115 (db_stress+0x4de3ab) https://github.com/facebook/rocksdb/issues/5 rocksdb::(anonymous namespace)::LegacyWritableFileWrapper::Append(rocksdb::Slice const&, rocksdb::IOOptions const&, rocksdb::IODebugContext*) internal_repo_rocksdb/repo/env/env.cc:248 (db_stress+0x6df44b) https://github.com/facebook/rocksdb/issues/6 rocksdb::WritableFileWriter::WriteBuffered(char const*, unsigned long, rocksdb::Env::IOPriority) internal_repo_rocksdb/repo/file/writable_file_writer.cc:551 (db_stress+0xa1a953) https://github.com/facebook/rocksdb/issues/7 rocksdb::WritableFileWriter::Flush(rocksdb::Env::IOPriority) internal_repo_rocksdb/repo/file/writable_file_writer.cc:327 (db_stress+0xa16ee8) https://github.com/facebook/rocksdb/issues/8 rocksdb::log::Writer::AddRecord(rocksdb::Slice const&, rocksdb::Env::IOPriority) internal_repo_rocksdb/repo/db/log_writer.cc:147 (db_stress+0x7f121f) https://github.com/facebook/rocksdb/issues/9 rocksdb::DBImpl::WriteToWAL(rocksdb::WriteBatch const&, rocksdb::log::Writer*, unsigned long*, unsigned long*, rocksdb::Env::IOPriority, rocksdb::DBImpl::LogFileNumberSize&) internal_repo_rocksdb/repo/db/db_impl/db_impl_write.cc:1285 (db_stress+0x695042) https://github.com/facebook/rocksdb/issues/10 rocksdb::DBImpl::WriteToWAL(rocksdb::WriteThread::WriteGroup const&, rocksdb::log::Writer*, unsigned long*, bool, bool, unsigned long, rocksdb::DBImpl::LogFileNumberSize&) internal_repo_rocksdb/repo/db/db_impl/db_impl_write.cc:1328 (db_stress+0x6907e8) https://github.com/facebook/rocksdb/issues/11 rocksdb::DBImpl::PipelinedWriteImpl(rocksdb::WriteOptions const&, rocksdb::WriteBatch*, rocksdb::WriteCallback*, unsigned long*, unsigned long, bool, unsigned long*) internal_repo_rocksdb/repo/db/db_impl/db_impl_write.cc:731 (db_stress+0x68e8a7) https://github.com/facebook/rocksdb/issues/12 rocksdb::DBImpl::WriteImpl(rocksdb::WriteOptions const&, rocksdb::WriteBatch*, rocksdb::WriteCallback*, unsigned long*, unsigned long, bool, unsigned long*, unsigned long, rocksdb::PreReleaseCallback*, rocksdb::PostMemTableCallback*) internal_repo_rocksdb/repo/db/db_impl/db_impl_write.cc:283 (db_stress+0x688370) https://github.com/facebook/rocksdb/issues/13 rocksdb::DBImpl::Write(rocksdb::WriteOptions const&, rocksdb::WriteBatch*) internal_repo_rocksdb/repo/db/db_impl/db_impl_write.cc:126 (db_stress+0x69a7b5) https://github.com/facebook/rocksdb/issues/14 rocksdb::DB::Put(rocksdb::WriteOptions const&, rocksdb::ColumnFamilyHandle*, rocksdb::Slice const&, rocksdb::Slice const&, rocksdb::Slice const&) internal_repo_rocksdb/repo/db/db_impl/db_impl_write.cc:2247 (db_stress+0x698634) https://github.com/facebook/rocksdb/issues/15 rocksdb::DBImpl::Put(rocksdb::WriteOptions const&, rocksdb::ColumnFamilyHandle*, rocksdb::Slice const&, rocksdb::Slice const&, rocksdb::Slice const&) internal_repo_rocksdb/repo/db/db_impl/db_impl_write.cc:37 (db_stress+0x699868) https://github.com/facebook/rocksdb/issues/16 rocksdb::NonBatchedOpsStressTest::TestPut(rocksdb::ThreadState*, rocksdb::WriteOptions&, rocksdb::ReadOptions const&, std::vector<int, std::allocator<int> > const&, std::vector<long, std::allocator<long> > const&, char (&) [100], std::unique_ptr<rocksdb::MutexLock, std::default_delete<rocksdb::MutexLock> >&) internal_repo_rocksdb/repo/db_stress_tool/no_batched_ops_stress.cc:681 (db_stress+0x38d20c) https://github.com/facebook/rocksdb/issues/17 rocksdb::StressTest::OperateDb(rocksdb::ThreadState*) internal_repo_rocksdb/repo/db_stress_tool/db_stress_test_base.cc:897 (db_stress+0x3399ec) https://github.com/facebook/rocksdb/issues/18 rocksdb::ThreadBody(void*) internal_repo_rocksdb/repo/db_stress_tool/db_stress_driver.cc:33 (db_stress+0x354857) https://github.com/facebook/rocksdb/issues/19 rocksdb::(anonymous namespace)::StartThreadWrapper(void*) internal_repo_rocksdb/repo/env/env_posix.cc:447 (db_stress+0x6eb2ad) Location is heap block of size 352 at 0x7b480003d800 allocated by thread T23: #0 operator new(unsigned long) <null> (db_stress+0xb685dc) https://github.com/facebook/rocksdb/issues/1 rocksdb::FaultInjectionTestFS::NewWritableFile(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, rocksdb::FileOptions const&, std::unique_ptr<rocksdb::FSWritableFile, std::default_delete<rocksdb::FSWritableFile> >*, rocksdb::IODebugContext*) internal_repo_rocksdb/repo/utilities/fault_injection_fs.cc:506 (db_stress+0x711192) https://github.com/facebook/rocksdb/issues/2 rocksdb::CompositeEnv::NewWritableFile(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::unique_ptr<rocksdb::WritableFile, std::default_delete<rocksdb::WritableFile> >*, rocksdb::EnvOptions const&) internal_repo_rocksdb/repo/env/composite_env.cc:329 (db_stress+0x4d33fa) https://github.com/facebook/rocksdb/issues/3 rocksdb::EnvWrapper::NewWritableFile(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::unique_ptr<rocksdb::WritableFile, std::default_delete<rocksdb::WritableFile> >*, rocksdb::EnvOptions const&) internal_repo_rocksdb/repo/include/rocksdb/env.h:1425 (db_stress+0x300662) ... ``` **Summary:** - Added the missing lock in functions mentioned above along with three other functions with a similar need in TestFSWritableFile - Added clarification comment Pull Request resolved: https://github.com/facebook/rocksdb/pull/10544 Test Plan: - Past the above race condition repro Reviewed By: ajkr Differential Revision: D38886634 Pulled By: hx235 fbshipit-source-id: 0571bae9615f35b16fbd8168204607e306b1b486 |
2 years ago |
|
Bo Wang
|
13cb7a84b6 |
Fix the memory leak in db_stress tests that are caused by `FaultInjectionSecondaryCache` and add `CompressedSecondaryCache` into stress tests. (#10523)
Summary:
1. Fix the memory leak in db_stress tests that are caused by `FaultInjectionSecondaryCache`. To address the test requirements for both CompressedSecondaryCache and CachlibWrapper, a new class variable `base_is_compressed_sec_cache_` is added to determine the different behaviors in `Lookup()` and `WaitAll()`.
2. Add `CompressedSecondaryCache` into stress tests.
Before this PR, memory leak is reported during crash tests if `CompressedSecondaryCache` is in stress tests. One example is shown as follows:
```
==70722==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 6648240 byte(s) in 83103 object(s) allocated from:
#0 0x13de9d7 in operator new(unsigned long) (/data/sandcastle/boxes/eden-trunk-hg-fbcode-fbsource/fbcode/buck-out/dbgo/gen/aab7ed39/internal_repo_rocksdb/repo/db_stress+0x13de9d7)
https://github.com/facebook/rocksdb/issues/1 0x9084c7 in rocksdb::BlocklikeTraits<rocksdb::Block>::Create(rocksdb::BlockContents&&, unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*) internal_repo_rocksdb/repo/table/block_based/block_like_traits.h:128
https://github.com/facebook/rocksdb/issues/2 0x9084c7 in std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)::operator()(void const*, unsigned long, void**, unsigned long*) const internal_repo_rocksdb/repo/table/block_based/block_like_traits.h:34
https://github.com/facebook/rocksdb/issues/3 0x9082c9 in rocksdb::Block std::__invoke_impl<rocksdb::Status, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*, unsigned long, void**, unsigned long*>(std::__invoke_other, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*&&, unsigned long&&, void**&&, unsigned long*&&) third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/invoke.h:61
https://github.com/facebook/rocksdb/issues/4 0x90825d in std::enable_if<is_invocable_r_v<rocksdb::Block, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*, unsigned long, void**, unsigned long*>, rocksdb::Block>::type std::__invoke_r<rocksdb::Status, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*, unsigned long, void**, unsigned long*>(std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*&&, unsigned long&&, void**&&, unsigned long*&&) third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/invoke.h:114
https://github.com/facebook/rocksdb/issues/5 0x9081b0 in std::_Function_handler<rocksdb::Status (void const*, unsigned long, void**, unsigned long*), std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)>::_M_invoke(std::_Any_data const&, void const*&&, unsigned long&&, void**&&, unsigned long*&&) third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/std_function.h:291
https://github.com/facebook/rocksdb/issues/6 0x991f2c in std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)>::operator()(void const*, unsigned long, void**, unsigned long*) const third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/std_function.h:560
https://github.com/facebook/rocksdb/issues/7 0x990277 in rocksdb::CompressedSecondaryCache::Lookup(rocksdb::Slice const&, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, bool, bool&) internal_repo_rocksdb/repo/cache/compressed_secondary_cache.cc:77
https://github.com/facebook/rocksdb/issues/8 0xd3aa4d in rocksdb::FaultInjectionSecondaryCache::Lookup(rocksdb::Slice const&, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, bool, bool&) internal_repo_rocksdb/repo/utilities/fault_injection_secondary_cache.cc:92
https://github.com/facebook/rocksdb/issues/9 0xeadaab in rocksdb::lru_cache::LRUCacheShard::Lookup(rocksdb::Slice const&, unsigned int, rocksdb::Cache::CacheItemHelper const*, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, rocksdb::Cache::Priority, bool, rocksdb::Statistics*) internal_repo_rocksdb/repo/cache/lru_cache.cc:445
https://github.com/facebook/rocksdb/issues/10 0x1064573 in rocksdb::ShardedCache::Lookup(rocksdb::Slice const&, rocksdb::Cache::CacheItemHelper const*, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, rocksdb::Cache::Priority, bool, rocksdb::Statistics*) internal_repo_rocksdb/repo/cache/sharded_cache.cc:89
https://github.com/facebook/rocksdb/issues/11 0x8be0df in rocksdb::BlockBasedTable::GetEntryFromCache(rocksdb::CacheTier const&, rocksdb::Cache*, rocksdb::Slice const&, rocksdb::BlockType, bool, rocksdb::GetContext*, rocksdb::Cache::CacheItemHelper const*, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, rocksdb::Cache::Priority) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader.cc:389
https://github.com/facebook/rocksdb/issues/12 0x905790 in rocksdb::Status rocksdb::BlockBasedTable::GetDataBlockFromCache<rocksdb::Block>(rocksdb::Slice const&, rocksdb::Cache*, rocksdb::Cache*, rocksdb::ReadOptions const&, rocksdb::CachableEntry<rocksdb::Block>*, rocksdb::UncompressionDict const&, rocksdb::BlockType, bool, rocksdb::GetContext*) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader.cc:1263
https://github.com/facebook/rocksdb/issues/13 0x8b9259 in rocksdb::Status rocksdb::BlockBasedTable::MaybeReadBlockAndLoadToCache<rocksdb::Block>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, bool, bool, rocksdb::CachableEntry<rocksdb::Block>*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::BlockContents*, bool) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader.cc:1559
https://github.com/facebook/rocksdb/issues/14 0x8b710c in rocksdb::Status rocksdb::BlockBasedTable::RetrieveBlock<rocksdb::Block>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, rocksdb::CachableEntry<rocksdb::Block>*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, bool, bool, bool, bool) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader.cc:1726
https://github.com/facebook/rocksdb/issues/15 0x8c329f in rocksdb::DataBlockIter* rocksdb::BlockBasedTable::NewDataBlockIterator<rocksdb::DataBlockIter>(rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::DataBlockIter*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::FilePrefetchBuffer*, bool, bool, rocksdb::Status&) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader_impl.h:58
https://github.com/facebook/rocksdb/issues/16 0x920117 in rocksdb::BlockBasedTableIterator::InitDataBlock() internal_repo_rocksdb/repo/table/block_based/block_based_table_iterator.cc:262
https://github.com/facebook/rocksdb/issues/17 0x920d42 in rocksdb::BlockBasedTableIterator::MaterializeCurrentBlock() internal_repo_rocksdb/repo/table/block_based/block_based_table_iterator.cc:332
https://github.com/facebook/rocksdb/issues/18 0xc6a201 in rocksdb::IteratorWrapperBase<rocksdb::Slice>::PrepareValue() internal_repo_rocksdb/repo/table/iterator_wrapper.h:78
https://github.com/facebook/rocksdb/issues/19 0xc6a201 in rocksdb::IteratorWrapperBase<rocksdb::Slice>::PrepareValue() internal_repo_rocksdb/repo/table/iterator_wrapper.h:78
https://github.com/facebook/rocksdb/issues/20 0xef9f6c in rocksdb::MergingIterator::PrepareValue() internal_repo_rocksdb/repo/table/merging_iterator.cc:260
https://github.com/facebook/rocksdb/issues/21 0xc6a201 in rocksdb::IteratorWrapperBase<rocksdb::Slice>::PrepareValue() internal_repo_rocksdb/repo/table/iterator_wrapper.h:78
https://github.com/facebook/rocksdb/issues/22 0xc67bcd in rocksdb::DBIter::FindNextUserEntryInternal(bool, rocksdb::Slice const*) internal_repo_rocksdb/repo/db/db_iter.cc:326
https://github.com/facebook/rocksdb/issues/23 0xc66d36 in rocksdb::DBIter::FindNextUserEntry(bool, rocksdb::Slice const*) internal_repo_rocksdb/repo/db/db_iter.cc:234
https://github.com/facebook/rocksdb/issues/24 0xc7ab47 in rocksdb::DBIter::Next() internal_repo_rocksdb/repo/db/db_iter.cc:161
https://github.com/facebook/rocksdb/issues/25 0x70d938 in rocksdb::BatchedOpsStressTest::TestPrefixScan(rocksdb::ThreadState*, rocksdb::ReadOptions const&, std::vector<int, std::allocator<int> > const&, std::vector<long, std::allocator<long> > const&) internal_repo_rocksdb/repo/db_stress_tool/batched_ops_stress.cc:320
https://github.com/facebook/rocksdb/issues/26 0x6dc6a8 in rocksdb::StressTest::OperateDb(rocksdb::ThreadState*) internal_repo_rocksdb/repo/db_stress_tool/db_stress_test_base.cc:907
https://github.com/facebook/rocksdb/issues/27 0x6867de in rocksdb::ThreadBody(void*) internal_repo_rocksdb/repo/db_stress_tool/db_stress_driver.cc:33
https://github.com/facebook/rocksdb/issues/28 0xce4cc2 in rocksdb::(anonymous namespace)::StartThreadWrapper(void*) internal_repo_rocksdb/repo/env/env_posix.cc:461
https://github.com/facebook/rocksdb/issues/29 0x7f23f9068c0e in start_thread /home/engshare/third-party2/glibc/2.34/src/glibc-2.34/nptl/pthread_create.c:434:8
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10523
Test Plan:
```
$COMPILE_WITH_ASAN=1 make -j 24
$db_stress J=40 crash_test_with_txn
```
Reviewed By: anand1976
Differential Revision: D38646839
Pulled By: gitbw95
fbshipit-source-id: 9452895c7dc95481a9d7afe83b15193cf5b1c43e
|
2 years ago |
|
sdong
|
bc575c614c |
Fix two extra headers (#10525)
Summary: Fix copyright for two more extra headers to make internal tool happy. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10525 Reviewed By: jay-zhuang Differential Revision: D38661390 fbshipit-source-id: ab2d055bfd145dfe82b5bae7a6c25cc338c8de94 |
2 years ago |
|
Peter Dillinger
|
86a1e3e0e7 |
Derive cache keys from SST unique IDs (#10394)
Summary: ... so that cache keys can be derived from DB manifest data before reading the file from storage--so that every part of the file can potentially go in a persistent cache. See updated comments in cache_key.cc for technical details. Importantly, the new cache key encoding uses some fancy but efficient math to pack data into the cache key without depending on the sizes of the various pieces. This simplifies some existing code creating cache keys, like cache warming before the file size is known. This should provide us an essentially permanent mapping between SST unique IDs and base cache keys, with the ability to "upgrade" SST unique IDs (and thus cache keys) with new SST format_versions. These cache keys are of similar, perhaps indistinguishable quality to the previous generation. Before this change (see "corrected" days between collision): ``` ./cache_bench -stress_cache_key -sck_keep_bits=43 18 collisions after 2 x 90 days, est 10 days between (1.15292e+19 corrected) ``` After this change (keep 43 bits, up through 50, to validate "trajectory" is ok on "corrected" days between collision): ``` 19 collisions after 3 x 90 days, est 14.2105 days between (1.63836e+19 corrected) 16 collisions after 5 x 90 days, est 28.125 days between (1.6213e+19 corrected) 15 collisions after 7 x 90 days, est 42 days between (1.21057e+19 corrected) 15 collisions after 17 x 90 days, est 102 days between (1.46997e+19 corrected) 15 collisions after 49 x 90 days, est 294 days between (2.11849e+19 corrected) 15 collisions after 62 x 90 days, est 372 days between (1.34027e+19 corrected) 15 collisions after 53 x 90 days, est 318 days between (5.72858e+18 corrected) 15 collisions after 309 x 90 days, est 1854 days between (1.66994e+19 corrected) ``` However, the change does modify (probably weaken) the "guaranteed unique" promise from this > SST files generated in a single process are guaranteed to have unique cache keys, unless/until number session ids * max file number = 2**86 to this (see https://github.com/facebook/rocksdb/issues/10388) > With the DB id limitation, we only have nice guaranteed unique cache keys for files generated in a single process until biggest session_id_counter and offset_in_file reach combined 64 bits I don't think this is a practical concern, though. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10394 Test Plan: unit tests updated, see simulation results above Reviewed By: jay-zhuang Differential Revision: D38667529 Pulled By: pdillinger fbshipit-source-id: 49af3fe7f47e5b61162809a78b76c769fd519fba |
2 years ago |
|
sdong
|
9277569ba3 |
Add some missing headers (#10519)
Summary: Some files miss headers. Also some headers are irregular. Fix them to make an internal checkup tool happy. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10519 Reviewed By: jay-zhuang Differential Revision: D38603291 fbshipit-source-id: 13b1bbd6d48f5ee15ba20da67544396de48238f1 |
2 years ago |
|
Jay Zhuang
|
5d3aefb682 |
Migrate to docker for CI run (#10496)
Summary: Moved linux builds to using docker to avoid CI instability caused by dependency installation site down. Added the `Dockerfile` which is used to build the image. The build time is also significantly reduced, because no dependencies installation and with using 2xlarge+ instance for slow build (like tsan test). Also fixed a few issues detected while building this: * `DestoryDB()` Status not checked for a few tests * nullptr might be used in `inlineskiplist.cc` Pull Request resolved: https://github.com/facebook/rocksdb/pull/10496 Test Plan: CI Reviewed By: ajkr Differential Revision: D38554200 Pulled By: jay-zhuang fbshipit-source-id: 16e8fb2bf07b9c84bb27fb18421c4d54f2f248fd |
2 years ago |
|
Jay Zhuang
|
3f763763aa |
Change `bottommost_temperture` to `last_level_temperture` (#10471)
Summary: Change tiered compaction feature from `bottommost_temperture` to `last_level_temperture`. The old option is kept for migration purpose only, which is behaving the same as `last_level_temperture` and it will be removed in the next release. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10471 Test Plan: CI Reviewed By: siying Differential Revision: D38450621 Pulled By: jay-zhuang fbshipit-source-id: cc1cdf8bad409376fec0152abc0a64fb72a91527 |
2 years ago |
|
Peter Dillinger
|
27f3af5966 |
Fix serious FSDirectory use-after-Close bug (missing fsync) (#10460)
Summary: TL;DR: due to a recent change, if you drop a column family, often that DB will no longer fsync after writing new SST files to remaining or new column families, which could lead to data loss on power loss. More bug detail: The intent of https://github.com/facebook/rocksdb/issues/10049 was to Close FSDirectory objects at DB::Close time rather than waiting for DB object destruction. Unfortunately, it also closes shared FSDirectory objects on DropColumnFamily (& destroy remaining handles), which can lead to use-after-Close on FSDirectory shared with remaining column families. Those "uses" are only Fsyncs (or redundant Closes). In the default Posix filesystem, an Fsync on a closed FSDirectory is a quiet no-op. Consequently (under most configurations), if you drop a column family, that DB will no longer fsync after writing new SST files to column families sharing the same directory (true under most configurations). More fix detail: Basically, this removes unnecessary Close ops on destroying ColumnFamilyData. We let `shared_ptr` take care of calling the destructor at the right time. If the intent was to require Close be called before destroying FSDirectory, that was not made clear by the author of FileSystem and was not at all enforced by https://github.com/facebook/rocksdb/issues/10049, which could have added `assert(fd_ == -1)` to `~PosixDirectory()` but did not. To keep this fix simple, we relax the unit test for https://github.com/facebook/rocksdb/issues/10049 to allow timely destruction of FSDirectory to suffice as Close (in CountedFileSystem). Added a TODO to revisit that. Also in this PR: * Added a TODO to share FSDirectory instances between DB and its column families. (Already shared among column families.) * Made DB::Close attempt to close all its open FSDirectory objects even if there is a failure in closing one. Also code clean-up around this logic. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10460 Test Plan: add an assert to check for use-after-Close. With that existing tests can detect the misuse. With fix, tests pass (except noted relaxing of unit test for https://github.com/facebook/rocksdb/issues/10049) Reviewed By: ajkr Differential Revision: D38357922 Pulled By: pdillinger fbshipit-source-id: d42079cadbedf0a969f03389bf586b3b4e1f9137 |
2 years ago |
|
Jay Zhuang
|
fcccc412d7 |
Remove Travis CI (#10407)
Summary: Travis CI is depreciated and haven't been maintained for some time. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10407 Reviewed By: ajkr Differential Revision: D38078382 Pulled By: jay-zhuang fbshipit-source-id: f42057f2f41f722bdce56bf195f67a94835191fb |
2 years ago |
|
DaPorkchop_
|
6bebe65030 |
Correctly implement Create-/DropColumnFamilies for PessimisticTransactionDB (#10332)
Summary: This overrides `CreateColumnFamilies` and `DropColumnFamilies` in `PessimisticTransactionDB` in order to add/remove the created column families to/from the lock manager. Fixes https://github.com/facebook/rocksdb/issues/10322. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10332 Reviewed By: ajkr Differential Revision: D37841079 Pulled By: riversand963 fbshipit-source-id: 854d7d9948b0089e0054a8f2875485ba44436fd2 |
2 years ago |
|
Wallace
|
1e9bf25f61 |
Do not hold mutex when write keys if not necessary (#7516)
Summary: ## Problem Summary RocksDB will acquire the global mutex of db instance for every time when user calls `Write`. When RocksDB schedules a lot of compaction jobs, it will compete the mutex with write thread and it will hurt the write performance. ## Problem Solution: I want to use log_write_mutex to replace the global mutex in most case so that we do not acquire it in write-thread unless there is a write-stall event or a write-buffer-full event occur. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7516 Test Plan: 1. make check 2. CI 3. COMPILE_WITH_TSAN=1 make db_stress make crash_test make crash_test_with_multiops_wp_txn make crash_test_with_multiops_wc_txn make crash_test_with_atomic_flush Reviewed By: siying Differential Revision: D36908702 Pulled By: riversand963 fbshipit-source-id: 59b13881f4f5c0a58fd3ca79128a396d9cd98efe |
2 years ago |
|
Andrew Kryczka
|
25cc564ff7 |
Make RateLimiter not Customizable (#10378)
Summary: (PR created for informational/testing purposes only.) - Fixes lost dynamic updates to GenericRateLimiter bandwidth using `SetBytesPerSecond()` - Benefit over #10374 is eliminating race conditions with Configurable framework. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10378 Reviewed By: pdillinger Differential Revision: D37914865 fbshipit-source-id: d4f566d60ec9726d26932388c61671adf0ee0f30 |
2 years ago |
|
Jay Zhuang
|
dcb6a3be4e |
Add helper function to get debug type name (#10243)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10243 Reviewed By: riversand963 Differential Revision: D37370236 Pulled By: jay-zhuang fbshipit-source-id: 6e7a6fadf45fdfb5afe97b3f6fe4acf1260d4a86 |
2 years ago |