Summary:
Adding largest sequence number to FlushJobInfo
and passing flushed file metadata to NotifyOnFlushCompleted which include alot of other values that we may want to expose in FlushJobInfo
Test Plan: make check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39927
Summary:
Add Env::GetThreadID(), which returns the ID of the current thread.
In addition, make GetThreadList() and InfoLog use same unique ID for the same thread.
Test Plan:
db_test
listener_test
Reviewers: igor, rven, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39735
Summary:
Right now the level we pass to ReFitLevel is the maximum level with files (before compaction), there are multiple cases where this maximum level have changed after compaction
- all files where in L0 (now maximum level is L1)
- using kCompactionStyleUniversal (now maximum level in the last level)
- level_compaction_dynamic_level_bytes ??
We can handle each of these cases individually, but I felt it's safer to calculate max_level_with_files again if we want to do a ReFitLevel
Test Plan:
adding some tests
make -j64 check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: ott, dhruba
Differential Revision: https://reviews.facebook.net/D39663
Summary:
There is a hang during DB close in the following scenario:
a) a load with WAL disabled was done,
b) CancelAllBackgroundWork was called,
c) DB Close was called
This was because in that we will wait for a flush but we cannot do a
background flush because we have called CancelAllBackgroundWork which
marks the DB as shutting downn.
Test Plan: Added DBTest FlushOnDestroy
Reviewers: sdong
Reviewed By: sdong
Subscribers: yoshinorim, hermanlee4, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39747
Summary: We currently issue malloc and free inside DB mutex in GetSnapshot() and ReleaseSnapshot(). Move them out.
Test Plan:
Go through all tests
make valgrind_check
Reviewers: yhchiang, rven, IslamAbdelRahman, anthony, igor
Reviewed By: igor
Subscribers: maykov, hermanlee4, MarkCallaghan, yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39753
Summary:
It is experimental. Allow users to return from a call back function TablePropertiesCollector::NeedCompact(), based on the data in the file.
It can be used to allow users to suggest DB to clear up delete tombstones faster.
Test Plan: Add a unit test.
Reviewers: igor, yhchiang, kradhakrishnan, rven
Reviewed By: rven
Subscribers: yoshinorim, MarkCallaghan, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39585
Summary:
EventListener::OnFlushCompleted() now passes a structure instead
of a list of parameters. This minimizes the API change in the
future.
Test Plan:
listener_test
compact_files_test
example/compact_files_example
Reviewers: kradhakrishnan, sdong, IslamAbdelRahman, rven, igor
Reviewed By: rven, igor
Subscribers: IslamAbdelRahman, rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39543
Summary: I encountered an issue where the database hang, it looks like the mutex is not unlocked on return in ReFitLevel function
Test Plan: make -j64 check
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39609
Summary:
The type of smallest_output_key_prefix and largest_output_key_prefix
have been changed to std::string in https://reviews.facebook.net/D39537.
As a result, we shouldn't do smallest_output_key_prefix[0] = 0 in the
initialization.
Test Plan: compile db_test with tsan enabled and repeat DBTest.CompactionDeletionTrigger test to verify the tsan issue has been gone.
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39645
Summary:
This diff updates the logic of how we do trivial move, now trivial move can run on any number of files in input level as long as they are not overlapping
The conditions for trivial move have been updated
Introduced conditions:
- Trivial move cannot happen if we have a compaction filter (except if the compaction is not manual)
- Input level files cannot be overlapping
Removed conditions:
- Trivial move only run when the compaction is not manual
- Input level should can contain only 1 file
More context on what tests failed because of Trivial move
```
DBTest.CompactionsGenerateMultipleFiles
This test is expecting compaction on a file in L0 to generate multiple files in L1, this test will fail with trivial move because we end up with one file in L1
```
```
DBTest.NoSpaceCompactRange
This test expect compaction to fail when we force environment to report running out of space, of course this is not valid in trivial move situation
because trivial move does not need any extra space, and did not check for that
```
```
DBTest.DropWrites
Similar to DBTest.NoSpaceCompactRange
```
```
DBTest.DeleteObsoleteFilesPendingOutputs
This test expect that a file in L2 is deleted after it's moved to L3, this is not valid with trivial move because although the file was moved it is now used by L3
```
```
CuckooTableDBTest.CompactionIntoMultipleFiles
Same as DBTest.CompactionsGenerateMultipleFiles
```
This diff is based on a work by @sdonghttps://reviews.facebook.net/D34149
Test Plan: make -j64 check
Reviewers: rven, sdong, igor
Reviewed By: igor
Subscribers: yhchiang, ott, march, dhruba, sdong
Differential Revision: https://reviews.facebook.net/D34797
Summary:
Add EventListener::OnTableFileDeletion(), which will be
called when a table file is deleted.
Test Plan: Extend three existing tests in db_test to verify the deleted files.
Reviewers: rven, anthony, kradhakrishnan, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38931
Summary:
Allow EventListener::OnCompactionCompleted to return CompactionJobStats,
which contains useful information about a compaction.
Example CompactionJobStats returned by OnCompactionCompleted():
smallest_output_key_prefix 05000000
largest_output_key_prefix 06990000
elapsed_time 42419
num_input_records 300
num_input_files 3
num_input_files_at_output_level 2
num_output_records 200
num_output_files 1
actual_bytes_input 167200
actual_bytes_output 110688
total_input_raw_key_bytes 5400
total_input_raw_value_bytes 300000
num_records_replaced 100
is_manual_compaction 1
Test Plan: Developed a mega test in db_test which covers 20 variables in CompactionJobStats.
Reviewers: rven, igor, anthony, sdong
Reviewed By: sdong
Subscribers: tnovak, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38463
Summary:
Add EventListener::OnTableFileCreated(), which will be called
when a table file is created. This patch is part of the
EventLogger and EventListener integration.
Test Plan: Augment existing test in db/listener_test.cc
Reviewers: anthony, kradhakrishnan, rven, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38865
Summary: Add a stats counter for DB_WRITE back which was mistakenly removed.
Test Plan: augment GroupCommitTest
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39399
Summary:
We occasionally get write stalls (>1s Write() calls) on HDD under read load. The following timers explain almost all of the stalls:
- perf_context.db_mutex_lock_nanos
- perf_context.db_condition_wait_nanos
- iostats_context.open_time
- iostats_context.allocate_time
- iostats_context.write_time
- iostats_context.range_sync_time
- iostats_context.logger_time
In my experiments each of these occasionally takes >1s on write path under some workload. There are rare cases when Write() takes long but none of these takes long.
Test Plan: Added code to our application to write the listed timings to log for slow writes. They usually add up to almost exactly the time Write() call took.
Reviewers: rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: march, dhruba, tnovak
Differential Revision: https://reviews.facebook.net/D39177
Summary: In DB::CompactRange(), change parameter "reduce_level" to "change_level". Users can compact all data to the last level if needed. By doing it, users can migrate the DB to options.level_compaction_dynamic_level_bytes=true.
Test Plan: Add a unit test for it.
Reviewers: yhchiang, anthony, kradhakrishnan, igor, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39099
Summary:
DBImpl::notifying_events_ is a internal counter in DBImpl which is
used to prevent DB close when DB is notifying events. However, as
the current events all rely on either compaction or flush which
already have similar counters to prevent DB close, it is safe to
remove notifying_events_.
Test Plan:
listener_test
examples/compact_files_example
Reviewers: igor, anthony, kradhakrishnan, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39315
Summary: Broken by optimistic transaction diff. (I only built 'release' not 'static_lib' when testing).
Test Plan: build
Reviewers: yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39219
Summary: Optimistic transactions supporting begin/commit/rollback semantics. Currently relies on checking the memtable to determine if there are any collisions at commit time. Not yet implemented would be a way of enuring the memtable has some minimum amount of history so that we won't fail to commit when the memtable is empty. You should probably start with transaction.h to get an overview of what is currently supported.
Test Plan: Added a new test, but still need to look into stress testing.
Reviewers: yhchiang, igor, rven, sdong
Reviewed By: sdong
Subscribers: adamretter, MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D33435
Summary:
For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit.
After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much.
This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit).
However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions.
Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here.
Reviewers: sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37443
Summary:
Rename EventLoggerHelpers EventHelpers, as it's going to include
all event-related helper functions instead of EventLogger only stuffs.
Test Plan: make
Reviewers: sdong, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39093
Summary: Removed an unused private variable in db_impl.h
Test Plan: make db_test
Reviewers: sdong, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38925
Summary:
This patch fixes the following two bugs on logging file deletion.
1. Previously, file deletion failure was only logged in INFO_LEVEL.
This patch changes it to ERROR_LEVEL and does some code clean.
2. EventLogger previously will always generate the same log on
table file deletion even when file deletion is not successful.
Now the resulting status of file deletion will also be logged.
Test Plan: make all check
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38817
Summary: Avoid logging under mutex in DBImpl::WriteLevel0TableForRecovery().
Test Plan: make all check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38823
Summary: Dump db stats in WARN level
Test Plan: run db_bench and verify the LOG
Reviewers: igor, MarkCallaghan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38691
Summary:
sync_file_range is not always asyncronous and thus can block writes if we do this for WAL in the foreground thread. See more here: http://yoshinorimatsunobu.blogspot.com/2014/03/how-syncfilerange-really-works.html
Some users don't want us to call sync_file_range on WALs. Some other do.
Thus, I'm adding a separate option wal_bytes_per_sync to control calling
sync_file_range on WAL files. bytes_per_sync will apply only to table
files now.
Test Plan: no more sync_file_range for WAL as evidenced by strace
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38253
Summary: As title. I spent some time thinking about it and I don't think there should be any issue with running manual compaction and flushes in parallel
Test Plan: make check works
Reviewers: rven, yhchiang, sdong
Reviewed By: yhchiang, sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38355
Summary: CompactRange() now is much more expensive for dynamic level base size as it goes through all the levels. Skip those not used levels between level 0 an base level.
Test Plan: Run all unit tests
Reviewers: yhchiang, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37125
Summary:
Added a couple functions to WriteBatchWithIndex to make it easier to query the value of a key including reading pending writes from a batch. (This is needed for transactions).
I created write_batch_with_index_internal.h to use to store an internal-only helper function since there wasn't a good place in the existing class hierarchy to store this function (and it didn't seem right to stick this function inside WriteBatchInternal::Rep).
Since I needed to access the WriteBatchEntryComparator, I moved some helper classes from write_batch_with_index.cc into write_batch_with_index_internal.h/.cc. WriteBatchIndexEntry, ReadableWriteBatch, and WriteBatchEntryComparator are all unchanged (just moved to a different file(s)).
Test Plan: Added new unit tests.
Reviewers: rven, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38037
Summary:
Couple changes:
1. instead of SnapshotList, just take a vector of snapshots
2. don't take a separate parameter is_snapshots_supported. If there are snapshots in the list, that means they are supported. I actually think we should get rid of this notion of snapshots not being supported.
3. don't pass in mutable_cf_options as a parameter. Lifetime of mutable_cf_options is a bit tricky to maintain, so it's better to not pass it in for the whole compaction job. We only really need it when we install the compaction results.
Test Plan: make check
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36627
Summary:
CPU profiling reveals GetApproximateSizes as a bottleneck for performance. The current implementation is sub-optimal, it scans every file in every level to compute the result.
We can take advantage of the fact that all levels above 0 are sorted in the increasing order of key ranges and use binary search to locate the starting index. This can reduce the number of comparisons required to compute the result.
Test Plan: We have good test coverage. Run the tests.
Reviewers: sdong, igor, rven, dynamike
Subscribers: dynamike, maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37755
Summary:
Added these events:
* Recovery start, finish and also when recovery creates a file
* Trivial move
* Compaction start, finish and when compaction creates a file
* Flush start, finish
Also includes small fix to EventLogger
Also added option ROCKSDB_PRINT_EVENTS_TO_STDOUT which is useful when we debug things. I've spent far too much time chasing LOG files.
Still didn't get sst table properties in JSON. They are written very deeply into the stack. I'll address in separate diff.
TODO:
* Write specification. Let's first use this for a while and figure out what's good data to put here, too. After that we'll write spec
* Write tools that parse and analyze LOGs. This can be in python or go. Good intern task.
Test Plan: Ran db_bench with ROCKSDB_PRINT_EVENTS_TO_STDOUT. Here's the output: https://phabricator.fb.com/P19811976
Reviewers: sdong, yhchiang, rven, MarkCallaghan, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37521
Summary:
CompactRange for universal compaction with num_levels > 1 seems to have a bug. The unit test also has a bug so it doesn't capture the problem.
Fix it. Revert the compact range to the logic equivalent to num_levels=1. Always compact all files together.
It should also fix DBTest.IncreaseUniversalCompactionNumLevels. The issue was that options.write_buffer_size = 100 << 10 and options.write_buffer_size = 100 << 10 are not used in later test scenarios. So write_buffer_size of 4MB was used. The compaction trigger condition is not anymore obvious as expected.
Test Plan: Run the new test and all test suites
Reviewers: yhchiang, rven, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37551
Summary:
Based on feedback from D37083.
Are all of these correct? In some spaces it seems like we're doing SetMaxPossibleForUserKey() although we want the smallest possible internal key for user key.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37341
Summary: D36669 introduces a bug that trivial moved data is not going to specific level but the next level, which will incorrectly be level 1 for level 0 compaciton if base level is not level 1. Fixing it by appreciating the output level
Test Plan: Run all tests
Reviewers: MarkCallaghan, rven, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37119
Summary:
The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong).
Here are couple of things demonstrating that Compaction class is hard to use:
1. we have two constructors of Compaction class
2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles
3. it's easy to introduce a subtle and dangerous bug like this: D36225
4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: afbafeaeae/db/compaction.cc (L236-L241). It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: afbafeaeae/db/compaction_picker.cc (L204-L210)
The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup.
My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object.
This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes:
* have one Compaction constructor instead of two.
* inputs_ is constant after construction
* MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction.
* SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input.
* CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need.
Test Plan:
make check
make asan_check
make valgrind_check
Reviewers: rven, anthony, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: sdong, yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36687
Summary:
Fix a compile error in ROCKSDB_LITE in db/db_impl.cc
related to internal_stats.
Test Plan: make OPT=-DROCKSDB_LITE shared_lib
Reviewers: sdong, igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36819
Summary: Now EnvOptions uses unsanitized DB options. bytes_per_sync is tuned off when rate_limiter is used, but this change doesn't take effort.
Test Plan: See different I/O pattern in db_bench running fillseq.
Reviewers: yhchiang, kradhakrishnan, rven, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36723
Summary: Now we add warnings when user configures compression and the compression is not supported.
Test Plan:
Configured compression to non-supported values. Observed messages in my log:
2015/03/26-12:17:57.586341 7ffb8a496840 [WARN] Compression type chosen for level 2 is not supported: LZ4. RocksDB will not compress data on level 2.
2015/03/26-12:19:10.768045 7f36f15c5840 [WARN] Compression type chosen is not supported: LZ4. RocksDB will not compress data.
Reviewers: rven, sdong, yhchiang
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35979
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
Islam AbdelRahman