Tag:
Branch:
Tree:
6cac4c79d4
main
oxigraph-8.1.1
oxigraph-8.3.2
oxigraph-main
${ noResults }
1504 Commits (6cac4c79d457f199271e05caca07539fc588e7d0)
| Author | SHA1 | Message | Date |
|---|---|---|---|
Yueh-Hsuan Chiang
|
e267909ecf |
Enable a multi-level db to smoothly migrate to FIFO via DB::Open (#10348)
Summary: FIFO compaction can theoretically open a DB with any compaction style. However, the current code only allows FIFO compaction to open a DB with a single level. This PR relaxes the limitation of FIFO compaction and allows it to open a DB with multiple levels. Below is the read / write / compaction behavior: * The read behavior is untouched, and it works like a regular rocksdb instance. * The write behavior is untouched as well. When a FIFO compacted DB is opened with multiple levels, all new files will still be in level 0, and no files will be moved to a different level. * Compaction logic is extended. It will first identify the bottom-most non-empty level. Then, it will delete the oldest file in that level. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10348 Test Plan: Added a new test to verify the migration from level to FIFO where the db has multiple levels. Extended existing test cases in db_test and db_basic_test to also verify all entries of a key after reopening the DB with FIFO compaction. Reviewed By: jay-zhuang Differential Revision: D40233744 fbshipit-source-id: 6cc011d6c3467e6bfb9b6a4054b87619e69815e1 |
2 years ago |
|
Jay Zhuang
|
5a5f21c489 |
Allow the last level data moving up to penultimate level (#10782)
Summary: Lock the penultimate level for the whole compaction inputs range, so any key in that compaction is safe to move up from the last level to penultimate level. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10782 Reviewed By: siying Differential Revision: D40231540 Pulled By: siying fbshipit-source-id: ca115cc8b4018b35d797329fa85a19b06cc8c13e |
2 years ago |
|
Peter Dillinger
|
2d0380adbe |
Allow manifest fix-up without requiring prior state (#10796)
Summary: This change is motivated by ensuring that `ldb update_manifest` or `UpdateManifestForFilesState` can run without expecting files to open when the old temperature is provided (in case the FileSystem strictly interprets non-kUnknown), but ended up fixing a problem in `OfflineManifestWriter` (used by `ldb unsafe_remove_sst_file`) where it would open some SST files during recovery and expect them to match the prior manifest state, even if not required by the intended new state. Also update BackupEngine to retry with Temperature kUnknown when reading file with potentially "wrong" temperature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10796 Test Plan: tests added/updated, that fail before the change(s) and now pass Reviewed By: jay-zhuang Differential Revision: D40232645 Pulled By: jay-zhuang fbshipit-source-id: b5aa2688aecfe0c320b80a7da689b315414c20be |
2 years ago |
|
akankshamahajan
|
ebf8c454fd |
Provide support for async_io with tailing iterators (#10781)
Summary: Provide support for async_io if ReadOptions.tailing is set true. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10781 Test Plan: - Update unit tests - Ran db_bench: ./db_bench --benchmarks="readrandom" --use_existing_db --use_tailing_iterator=1 --async_io=1 Reviewed By: anand1976 Differential Revision: D40128882 Pulled By: anand1976 fbshipit-source-id: 55e17855536871a5c47e2de92d238ae005c32d01 |
2 years ago |
|
Jay Zhuang
|
c401f285c3 |
Add option `preserve_internal_time_seconds` to preserve the time info (#10747)
Summary: Add option `preserve_internal_time_seconds` to preserve the internal time information. It's mostly for the migration of the existing data to tiered storage ( `preclude_last_level_data_seconds`). When the tiering feature is just enabled, the existing data won't have the time information to decide if it's hot or cold. Enabling this feature will start collect and preserve the time information for the new data. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10747 Reviewed By: siying Differential Revision: D39910141 Pulled By: siying fbshipit-source-id: 25c21638e37b1a7c44006f636b7d714fe7242138 |
2 years ago |
|
Peter Dillinger
|
b205c6d029 |
Fix bug in HyperClockCache ApplyToEntries; cleanup (#10768)
Summary: We have seen some rare crash test failures in HyperClockCache, and the source could certainly be a bug fixed in this change, in ClockHandleTable::ConstApplyToEntriesRange. It wasn't properly accounting for the fact that incrementing the acquire counter could be ineffective, due to parallel updates. (When incrementing the acquire counter is ineffective, it is incorrect to then decrement it.) This change includes some other minor clean-up in HyperClockCache, and adds stats_dump_period_sec with a much lower period to the crash test. This should be the primary caller of ApplyToEntries, in collecting cache entry stats. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10768 Test Plan: haven't been able to reproduce the failure, but should be in a better state (bug fix and improved crash test) Reviewed By: anand1976 Differential Revision: D40034747 Pulled By: anand1976 fbshipit-source-id: a06fcefe146e17ee35001984445cedcf3b63eb68 |
2 years ago |
|
Yanqin Jin
|
4d82b94896 |
Sanitize min_write_buffer_number_to_merge to 1 with atomic_flush (#10773)
Summary: With current implementation, within the same RocksDB instance, all column families with non-empty memtables will be scheduled for flush if RocksDB determines that any column family needs to be flushed, e.g. memtable full, write buffer manager, etc., if atomic flush is enabled. Not doing so can lead to data loss and inconsistency when WAL is disabled, which is a common setting when atomic flush is enabled. Therefore, setting a per-column-family knob, min_write_buffer_number_to_merge to a value greater than 1 is not compatible with atomic flush, and should be sanitized during column family creation and db open. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10773 Test Plan: Reproduce: D39993203 has detailed steps. Run the test with and without the fix. Reviewed By: cbi42 Differential Revision: D40077955 Pulled By: cbi42 fbshipit-source-id: 451a9179eb531ac42eaccf40b451b9dec4085240 |
2 years ago |
|
Changyu Bi
|
eca47fb696 |
Ignore kBottommostFiles compaction logic when allow_ingest_behind (#10767)
Summary: fix for https://github.com/facebook/rocksdb/issues/10752 where RocksDB could be in an infinite compaction loop (with compaction reason kBottommostFiles) if allow_ingest_behind is enabled and the bottommost level is unfilled. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10767 Test Plan: Added a unit test to reproduce the compaction loop. Reviewed By: ajkr Differential Revision: D40031861 Pulled By: ajkr fbshipit-source-id: 71c4b02931fbe507a847632905404c9b8fa8c96b |
2 years ago |
|
Changyu Bi
|
ffde463a5f |
Cleanup SuperVersion in Iterator::Refresh() (#10770)
Summary: Fix a bug in Iterator::Refresh() where the local SV it obtained could be obsolete upon return, and should be cleaned up. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10770 Test Plan: added a unit test to reproduce the issue. Reviewed By: ajkr Differential Revision: D40063809 Pulled By: ajkr fbshipit-source-id: 619e728eb0f1ac9540b4d0ad38e43acc37a514b2 |
2 years ago |
|
Yanqin Jin
|
edda219fc3 |
Manual flush with `wait=false` should not stall when writes stopped (#10001)
Summary: When `FlushOptions::wait` is set to false, manual flush should not stall forever. If the database has already stopped writes, then the thread calling `DB::Flush()` with `FlushOptions::wait=false` should not enter the `DBImpl::write_thread_`. To prevent this, we should do a check at the beginning and return `TryAgain()` Resolves: https://github.com/facebook/rocksdb/issues/9892 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10001 Reviewed By: siying Differential Revision: D36422303 Pulled By: siying fbshipit-source-id: 723bd3065e8edc4f17c82449d0d6b95a2381ac0a |
2 years ago |
|
Jay Zhuang
|
f007ad8b4f |
RoundRobin TTL compaction (#10725)
Summary: For RoundRobin compaction, the data should be mostly sorted per level and within level. Use normal compaction picker for RR until all expired data is compacted. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10725 Reviewed By: ajkr Differential Revision: D39771069 Pulled By: jay-zhuang fbshipit-source-id: 7ccf88d7c093fad5673bda73a7b08cc4757780cd |
2 years ago |
|
akankshamahajan
|
ae0f9c3339 |
Add new property in IOOptions to skip recursing through directories and list only files during GetChildren. (#10668)
Summary: Add new property "do_not_recurse" in IOOptions for underlying file system to skip iteration of directories during DB::Open if there are no sub directories and list only files. By default this property is set to false. This property is set true currently in the code where RocksDB is sure only files are needed during DB::Open. Provided support in PosixFileSystem to use "do_not_recurse". TestPlan: - Existing tests Pull Request resolved: https://github.com/facebook/rocksdb/pull/10668 Reviewed By: anand1976 Differential Revision: D39471683 Pulled By: akankshamahajan15 fbshipit-source-id: 90e32f0b86d5346d53bc2714d3a0e7002590527f |
2 years ago |
|
Changyu Bi
|
9f2363f4c4 |
User-defined timestamp support for `DeleteRange()` (#10661)
Summary: Add user-defined timestamp support for range deletion. The new API is `DeleteRange(opt, cf, begin_key, end_key, ts)`. Most of the change is to update the comparator to compare without timestamp. Other than that, major changes are - internal range tombstone data structures (`FragmentedRangeTombstoneList`, `RangeTombstone`, etc.) to store timestamps. - Garbage collection of range tombstones and range tombstone covered keys during compaction. - Get()/MultiGet() to return the timestamp of a range tombstone when needed. - Get/Iterator with range tombstones bounded by readoptions.timestamp. - timestamp crash test now issues DeleteRange by default. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10661 Test Plan: - Added unit test: `make check` - Stress test: `python3 tools/db_crashtest.py --enable_ts whitebox --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4` - Ran `db_bench` to measure regression when timestamp is not enabled. The tests are for write (with some range deletion) and iterate with DB fitting in memory: `./db_bench--benchmarks=fillrandom,seekrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=500000 --seek_nexts=10 --disable_auto_compactions -disable_wal=true --max_num_range_tombstones=1000`. Did not see consistent regression in no timestamp case. | micros/op | fillrandom | seekrandom | | --- | --- | --- | |main| 2.58 |10.96| |PR 10661| 2.68 |10.63| Reviewed By: riversand963 Differential Revision: D39441192 Pulled By: cbi42 fbshipit-source-id: f05aca3c41605caf110daf0ff405919f300ddec2 |
2 years ago |
|
Jay Zhuang
|
f3cc66632b |
Align compaction output file boundaries to the next level ones (#10655)
Summary:
Try to align the compaction output file boundaries to the next level ones
(grandparent level), to reduce the level compaction write-amplification.
In level compaction, there are "wasted" data at the beginning and end of the
output level files. Align the file boundary can avoid such "wasted" compaction.
With this PR, it tries to align the non-bottommost level file boundaries to its
next level ones. It may cut file when the file size is large enough (at least
50% of target_file_size) and not too large (2x target_file_size).
db_bench shows about 12.56% compaction reduction:
```
TEST_TMPDIR=/data/dbbench2 ./db_bench --benchmarks=fillrandom,readrandom -max_background_jobs=12 -num=400000000 -target_file_size_base=33554432
# baseline:
Flush(GB): cumulative 25.882, interval 7.216
Cumulative compaction: 285.90 GB write, 162.36 MB/s write, 269.68 GB read, 153.15 MB/s read, 2926.7 seconds
# with this change:
Flush(GB): cumulative 25.882, interval 7.753
Cumulative compaction: 249.97 GB write, 141.96 MB/s write, 233.74 GB read, 132.74 MB/s read, 2534.9 seconds
```
The compaction simulator shows a similar result (14% with 100G random data).
As a side effect, with this PR, the SST file size can exceed the
target_file_size, but is capped at 2x target_file_size. And there will be
smaller files. Here are file size statistics when loading 100GB with the target
file size 32MB:
```
baseline this_PR
count 1.656000e+03 1.705000e+03
mean 3.116062e+07 3.028076e+07
std 7.145242e+06 8.046139e+06
```
The feature is enabled by default, to revert to the old behavior disable it
with `AdvancedColumnFamilyOptions.level_compaction_dynamic_file_size = false`
Also includes https://github.com/facebook/rocksdb/issues/1963 to cut file before skippable grandparent file. Which is for
use case like user adding 2 or more non-overlapping data range at the same
time, it can reduce the overlapping of 2 datasets in the lower levels.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10655
Reviewed By: cbi42
Differential Revision: D39552321
Pulled By: jay-zhuang
fbshipit-source-id: 640d15f159ab0cd973f2426cfc3af266fc8bdde2
|
2 years ago |
|
Changyu Bi
|
df492791b6 |
Fix segfault in Iterator::Refresh() (#10739)
Summary: when a new internal iterator is constructed during iterator refresh, pointer to the previous memtable range tombstone iterator was not cleared. This could cause segfault for future `Refresh()` calls when they try to free the memtable range tombstones. This PR fixes this issue. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10739 Test Plan: added a unit test in db_range_del_test.cc to reproduce this issue. Reviewed By: ajkr, riversand963 Differential Revision: D39825283 Pulled By: cbi42 fbshipit-source-id: 3b59a2b73865aed39e28cdd5c1b57eed7991b94c |
2 years ago |
|
Yanqin Jin
|
52f2411722 |
Update HISTORY to mention PR #10724 (#10737)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10737 Reviewed By: cbi42 Differential Revision: D39825386 Pulled By: riversand963 fbshipit-source-id: a3c55f2777e034d6ae6ff44ef0219d9fbbf1cc96 |
2 years ago |
|
Changyu Bi
|
93f46da1fa |
Mention in HISTORY.md the fix in #10705 (#10720)
Summary: Mention in HISTORY.md the fix in https://github.com/facebook/rocksdb/issues/10705. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10720 Reviewed By: riversand963 Differential Revision: D39709455 Pulled By: cbi42 fbshipit-source-id: 1a2c9dd8425c73f7095ddb1d0b1cca8ed35b7ef2 |
2 years ago |
|
Akanksha Mahajan
|
0f4978d34f |
Fix sqe->addr passed in cancel request in io_uring (#10644)
Summary: Update io_uring_prep_cancel as it is now backward compatible. Also, io_uring_prep_cancel expects sqe->addr to match with read request submitted. It's being set wrong which is now fixed in this PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10644 Test Plan: - Ran internally with lastest liburing package and on RocksDB github repo with older version. - Ran seekrandom regression to confirm there is no regression. Reviewed By: anand1976 Differential Revision: D39284229 Pulled By: akankshamahajan15 fbshipit-source-id: fd52cdf23d676da114896163626b75c8ae09c980 |
2 years ago |
|
Yanqin Jin
|
2b6f3510c2 |
Update version number and HISTORY in main branch (#10694)
Summary: This PR bumps up version number from 7.7 to 7.8 in main branch, indicating that next release will be 7.8. We are going to release 7.7 soon. Since 7.7.fb branch has been created, we can land this to main. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10694 Reviewed By: gitbw95 Differential Revision: D39581577 Pulled By: riversand963 fbshipit-source-id: 84f3fecf25fd9ac96e46b4cd6d50ddb6edc89427 |
2 years ago |
|
gitbw95
|
2cc5b39560 |
Add enable_split_merge option for CompressedSecondaryCache (#10690)
Summary: `enable_custom_split_merge` is added for enabling the custom split and merge feature, which split the compressed value into chunks so that they may better fit jemalloc bins. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10690 Test Plan: Unit Tests Stress Tests Reviewed By: anand1976 Differential Revision: D39567604 Pulled By: gitbw95 fbshipit-source-id: f6d1d46200f365220055f793514601dcb0edc4b7 |
2 years ago |
|
Peter Dillinger
|
0f91c72adc |
Call experimental new clock cache HyperClockCache (#10684)
Summary: This change establishes a distinctive name for the experimental new lock-free clock cache (originally developed by guidotag and revamped in PR https://github.com/facebook/rocksdb/issues/10626). A few reasons: * We want to make it clear that this is a fundamentally different implementation vs. the old clock cache, to avoid people saying "I already tried clock cache." * We want to highlight the key feature: it's fast (especially under parallel load) * Because it requires an estimated charge per entry, it is not drop-in API compatible with old clock cache. This estimate might always be required for highest performance, and giving it a distinct name should reduce confusion about the distinct API requirements. * We might develop a variant requiring the same estimate parameter but with LRU eviction. In that case, using the name HyperLRUCache should make things more clear. (FastLRUCache is just a prototype that might soon be removed.) Some API detail: * To reduce copy-pasting parameter lists, etc. as in LRUCache construction, I have a `MakeSharedCache()` function on `HyperClockCacheOptions` instead of `NewHyperClockCache()`. * Changes -cache_type=clock_cache to -cache_type=hyper_clock_cache for applicable tools. I think this is more consistent / sustainable for reasons already stated. For performance tests see https://github.com/facebook/rocksdb/pull/10626 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10684 Test Plan: no interesting functional changes; tests updated Reviewed By: anand1976 Differential Revision: D39547800 Pulled By: pdillinger fbshipit-source-id: 5c0fe1b5cf3cb680ab369b928c8569682b9795bf |
2 years ago |
|
anand76
|
37b75e1364 |
Fix some MultiGet stats (#10673)
Summary: The stats were not accurate for the coroutine version of MultiGet. This PR fixes it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10673 Reviewed By: akankshamahajan15 Differential Revision: D39492615 Pulled By: anand1976 fbshipit-source-id: b46c04e15ea27e66f4c31f00c66497aa283bf9d3 |
2 years ago |
|
anand76
|
7b11d48444 |
Change MultiGet multi-level optimization to default on (#10671)
Summary: Change the ```ReadOptions.optimize_multiget_for_io``` flag to default on. It doesn't impact regular MultiGet users as its only applicable when ```ReadOptions.async_io``` is also set to true. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10671 Reviewed By: akankshamahajan15 Differential Revision: D39477439 Pulled By: anand1976 fbshipit-source-id: 47abcdbfa69f9bc60422ab68a238b232e085d4ba |
2 years ago |
|
Changyu Bi
|
f291eefb02 |
Cache fragmented range tombstone list for mutable memtables (#10547)
Summary: Each read from memtable used to read and fragment all the range tombstones into a `FragmentedRangeTombstoneList`. https://github.com/facebook/rocksdb/issues/10380 improved the inefficient here by caching a `FragmentedRangeTombstoneList` with each immutable memtable. This PR extends the caching to mutable memtables. The fragmented range tombstone can be constructed in either read (This PR) or write path (https://github.com/facebook/rocksdb/issues/10584). With both implementation, each `DeleteRange()` will invalidate the cache, and the difference is where the cache is re-constructed.`CoreLocalArray` is used to store the cache with each memtable so that multi-threaded reads can be efficient. More specifically, each core will have a shared_ptr to a shared_ptr pointing to the current cache. Each read thread will only update the reference count in its core-local shared_ptr, and this is only needed when reading from mutable memtables. The choice between write path and read path is not an easy one: they are both improvement compared to no caching in the current implementation, but they favor different operations and could cause regression in the other operation (read vs write). The write path caching in (https://github.com/facebook/rocksdb/issues/10584) leads to a cleaner implementation, but I chose the read path caching here to avoid significant regression in write performance when there is a considerable amount of range tombstones in a single memtable (the number from the benchmark below suggests >1000 with concurrent writers). Note that even though the fragmented range tombstone list is only constructed in `DeleteRange()` operations, it could block other writes from proceeding, and hence affects overall write performance. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10547 Test Plan: - TestGet() in stress test is updated in https://github.com/facebook/rocksdb/issues/10553 to compare Get() result against expected state: `./db_stress_branch --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4` - Perf benchmark: tested read and write performance where a memtable has 0, 1, 10, 100 and 1000 range tombstones. ``` ./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=200000 --reads=100000 --disable_auto_compactions --max_num_range_tombstones=1000 ``` Write perf regressed since the cost of constructing fragmented range tombstone list is shifted from every read to a single write. 6cbe5d8e172dc5f1ef65c9d0a6eedbd9987b2c72 is included in the last column as a reference to see performance impact on multi-thread reads if `CoreLocalArray` is not used. micros/op averaged over 5 runs: first 4 columns are for fillrandom, last 4 columns are for readrandom. | |fillrandom main | write path caching | read path caching |memtable V3 (https://github.com/facebook/rocksdb/issues/10308) | readrandom main | write path caching | read path caching |memtable V3 | |--- |--- |--- |--- |--- | --- | --- | --- | --- | | 0 |6.35 |6.15 |5.82 |6.12 |2.24 |2.26 |2.03 |2.07 | | 1 |5.99 |5.88 |5.77 |6.28 |2.65 |2.27 |2.24 |2.5 | | 10 |6.15 |6.02 |5.92 |5.95 |5.15 |2.61 |2.31 |2.53 | | 100 |5.95 |5.78 |5.88 |6.23 |28.31 |2.34 |2.45 |2.94 | | 100 25 threads |52.01 |45.85 |46.18 |47.52 |35.97 |3.34 |3.34 |3.56 | | 1000 |6.0 |7.07 |5.98 |6.08 |333.18 |2.86 |2.7 |3.6 | | 1000 25 threads |52.6 |148.86 |79.06 |45.52 |473.49 |3.66 |3.48 |4.38 | - Benchmark performance of`readwhilewriting` from https://github.com/facebook/rocksdb/issues/10552, 100 range tombstones are written: `./db_bench --benchmarks=readwhilewriting --writes_per_range_tombstone=500 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=100000 --reads=500000 --disable_auto_compactions --max_num_range_tombstones=10000 --finish_after_writes` readrandom micros/op: | |main |write path caching |read path caching |memtable V3 | |---|---|---|---|---| | single thread |48.28 |1.55 |1.52 |1.96 | | 25 threads |64.3 |2.55 |2.67 |2.64 | Reviewed By: ajkr Differential Revision: D38895410 Pulled By: cbi42 fbshipit-source-id: 930bfc309dd1b2f4e8e9042f5126785bba577559 |
2 years ago |
|
Akanksha Mahajan
|
03fc43976d |
Async optimization in scan path (#10602)
Summary: Optimizations 1. In FilePrefetchBuffer, when data is overlapping between two buffers, it copies the data from first to third buffer, then from second to third buffer to return continuous buffer. This optimization will call ReadAsync on first buffer as soon as buffer is empty instead of getting blocked by second buffer to copy the data. 2. For fixed size readahead_size, FilePrefetchBuffer will issues two async read calls. One with length + readahead_size_/2 on first buffer(if buffer is empty) and readahead_size_/2 on second buffer during seek. - Add readahead_size to db_stress for stress testing these changes in https://github.com/facebook/rocksdb/pull/10632 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10602 Test Plan: - CircleCI tests - stress_test completed successfully export CRASH_TEST_EXT_ARGS="--async_io=1" make crash_test -j32 - db_bench showed no regression With this PR: ``` ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main1 -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=50000000 -use_direct_reads=false -seek_nexts=327680 -duration=30 -ops_between_duration_checks=1 -async_io=1 Set seed to 1661876074584472 because --seed was 0 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags Integrated BlobDB: blob cache disabled RocksDB: version 7.7.0 Date: Tue Aug 30 09:14:34 2022 CPU: 32 * Intel Xeon Processor (Skylake) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 50000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 25939.9 MB (estimated) FileSize: 13732.9 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_main1] seekrandom : 270878.018 micros/op 3 ops/sec 30.068 seconds 111 operations; 618.7 MB/s (111 of 111 found) ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main1 -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=50000000 -use_direct_reads=true -seek_nexts=327680 -duration=30 -ops_between_duration_checks=1 -async_io=1 Set seed to 1661875332862922 because --seed was 0 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags Integrated BlobDB: blob cache disabled RocksDB: version 7.7.0 Date: Tue Aug 30 09:02:12 2022 CPU: 32 * Intel Xeon Processor (Skylake) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 50000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 25939.9 MB (estimated) FileSize: 13732.9 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 WARNING: Assertions are enabled; benchmarks unnecessarily slow ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_main1] seekrandom : 358352.488 micros/op 2 ops/sec 30.102 seconds 84 operations; 474.4 MB/s (84 of 84 found) ``` Without PR in main: ``` ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main1 -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=50000000 -use_direct_reads=false -seek_nexts=327680 -duration=30 -ops_between_duration_checks=1 -async_io=1 Set seed to 1661876425983045 because --seed was 0 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags Integrated BlobDB: blob cache disabled RocksDB: version 7.7.0 Date: Tue Aug 30 09:20:26 2022 CPU: 32 * Intel Xeon Processor (Skylake) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 50000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 25939.9 MB (estimated) FileSize: 13732.9 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_main1] seekrandom : 280881.953 micros/op 3 ops/sec 30.054 seconds 107 operations; 605.2 MB/s (107 of 107 found) ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main1 -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=50000000 -use_direct_reads=false -seek_nexts=327680 -duration=30 -ops_between_duration_checks=1 -async_io=0 Set seed to 1661876475267771 because --seed was 0 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags Integrated BlobDB: blob cache disabled RocksDB: version 7.7.0 Date: Tue Aug 30 09:21:15 2022 CPU: 32 * Intel Xeon Processor (Skylake) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 50000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 25939.9 MB (estimated) FileSize: 13732.9 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_main1] seekrandom : 363155.084 micros/op 2 ops/sec 30.142 seconds 83 operations; 468.1 MB/s (83 of 83 found) ``` Reviewed By: anand1976 Differential Revision: D39141328 Pulled By: akankshamahajan15 fbshipit-source-id: 560655922c1a437a8569c228abb31b8c0b413120 |
2 years ago |
|
ltamasi
|
dc7d155438 |
Mention some recent blob caching related changes in HISTORY.md (#10653)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10653 Reviewed By: riversand963 Differential Revision: D39368165 Pulled By: ltamasi fbshipit-source-id: 06cfd3c87ca90b9d07c082d5e307c0dc6a16840c |
2 years ago |
|
gitbw95
|
0148c4934d |
Add PerfContext counters for CompressedSecondaryCache (#10650)
Summary: Add PerfContext counters for CompressedSecondaryCache. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10650 Test Plan: Unit Tests. Reviewed By: anand1976 Differential Revision: D39354712 Pulled By: gitbw95 fbshipit-source-id: 1b90d3df99d08ddecd351edfd48d1e3723fdbc15 |
2 years ago |
|
Yanqin Jin
|
3d67d79154 |
Fix overlapping check by excluding timestamp (#10615)
Summary:
With user-defined timestamp, checking overlapping should exclude
timestamp part from key. This has already been done for range checking
for files in sstableKeyCompare(), but not yet done when checking with
concurrent compactions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10615
Test Plan:
(Will add more tests)
make check
(Repro seems easier with this commit sha: git checkout
|
2 years ago |
|
Peter Dillinger
|
6de7081cf3 |
Always verify SST unique IDs on SST file open (#10532)
Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2 |
2 years ago |
|
Bo Wang
|
d490bfcdb6 |
Avoid recompressing cold block in CompressedSecondaryCache (#10527)
Summary:
**Summary:**
When a block is firstly `Lookup` from the secondary cache, we just insert a dummy block in the primary cache (charging the actual size of the block) and don’t erase the block from the secondary cache. A standalone handle is returned from `Lookup`. Only if the block is hit again, we erase it from the secondary cache and add it into the primary cache.
When a block is firstly evicted from the primary cache to the secondary cache, we just insert a dummy block (size 0) in the secondary cache. When the block is evicted again, it is treated as a hot block and is inserted into the secondary cache.
**Implementation Details**
Add a new state of LRUHandle: The handle is never inserted into the LRUCache (both hash table and LRU list) and it doesn't experience the above three states. The entry can be freed when refs becomes 0. (refs >= 1 && in_cache == false && IS_STANDALONE == true)
The behaviors of `LRUCacheShard::Lookup()` are updated if the secondary_cache is CompressedSecondaryCache:
1. If a handle is found in primary cache:
1.1. If the handle's value is not nullptr, it is returned immediately.
1.2. If the handle's value is nullptr, this means the handle is a dummy one. For a dummy handle, if it was retrieved from secondary cache, it may still exist in secondary cache.
- 1.2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
- 1.2.2. If the handle from secondary cache is valid, erase it from the secondary cache and add it into the primary cache.
2. If a handle is not found in primary cache:
2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
2.2. If the handle from secondary cache is valid, insert a dummy block in the primary cache (charging the actual size of the block) and return a standalone handle.
The behaviors of `LRUCacheShard::Promote()` are updated as follows:
1. If `e->sec_handle` has value, one of the following steps can happen:
1.1. Insert a dummy handle and return a standalone handle to caller when `secondary_cache_` is `CompressedSecondaryCache` and e is a standalone handle.
1.2. Insert the item into the primary cache and return the handle to caller.
1.3. Exception handling.
3. If `e->sec_handle` has no value, mark the item as not in cache and charge the cache as its only metadata that'll shortly be released.
The behavior of `CompressedSecondaryCache::Insert()` is updated:
1. If a block is evicted from the primary cache for the first time, a dummy item is inserted.
4. If a dummy item is found for a block, the block is inserted into the secondary cache.
The behavior of `CompressedSecondaryCache:::Lookup()` is updated:
1. If a handle is not found or it is a dummy item, a nullptr is returned.
2. If `erase_handle` is true, the handle is erased.
The behaviors of `LRUCacheShard::Release()` are adjusted for the standalone handles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10527
Test Plan:
1. stress tests.
5. unit tests.
6. CPU profiling for db_bench.
Reviewed By: siying
Differential Revision: D38747613
Pulled By: gitbw95
fbshipit-source-id: 74a1eba7e1957c9affb2bd2ae3e0194584fa6eca
|
2 years ago |
|
Changyu Bi
|
30bc495c03 |
Skip swaths of range tombstone covered keys in merging iterator (2022 edition) (#10449)
Summary: Delete range logic is moved from `DBIter` to `MergingIterator`, and `MergingIterator` will seek to the end of a range deletion if possible instead of scanning through each key and check with `RangeDelAggregator`. With the invariant that a key in level L (consider memtable as the first level, each immutable and L0 as a separate level) has a larger sequence number than all keys in any level >L, a range tombstone `[start, end)` from level L covers all keys in its range in any level >L. This property motivates optimizations in iterator: - in `Seek(target)`, if level L has a range tombstone `[start, end)` that covers `target.UserKey`, then for all levels > L, we can do Seek() on `end` instead of `target` to skip some range tombstone covered keys. - in `Next()/Prev()`, if the current key is covered by a range tombstone `[start, end)` from level L, we can do `Seek` to `end` for all levels > L. This PR implements the above optimizations in `MergingIterator`. As all range tombstone covered keys are now skipped in `MergingIterator`, the range tombstone logic is removed from `DBIter`. The idea in this PR is similar to https://github.com/facebook/rocksdb/issues/7317, but this PR leaves `InternalIterator` interface mostly unchanged. **Credit**: the cascading seek optimization and the sentinel key (discussed below) are inspired by [Pebble](https://github.com/cockroachdb/pebble/blob/master/merging_iter.go) and suggested by ajkr in https://github.com/facebook/rocksdb/issues/7317. The two optimizations are mostly implemented in `SeekImpl()/SeekForPrevImpl()` and `IsNextDeleted()/IsPrevDeleted()` in `merging_iterator.cc`. See comments for each method for more detail. One notable change is that the minHeap/maxHeap used by `MergingIterator` now contains range tombstone end keys besides point key iterators. This helps to reduce the number of key comparisons. For example, for a range tombstone `[start, end)`, a `start` and an `end` `HeapItem` are inserted into the heap. When a `HeapItem` for range tombstone start key is popped from the minHeap, we know this range tombstone becomes "active" in the sense that, before the range tombstone's end key is popped from the minHeap, all the keys popped from this heap is covered by the range tombstone's internal key range `[start, end)`. Another major change, *delete range sentinel key*, is made to `LevelIterator`. Before this PR, when all point keys in an SST file are iterated through in `MergingIterator`, a level iterator would advance to the next SST file in its level. In the case when an SST file has a range tombstone that covers keys beyond the SST file's last point key, advancing to the next SST file would lose this range tombstone. Consequently, `MergingIterator` could return keys that should have been deleted by some range tombstone. We prevent this by pretending that file boundaries in each SST file are sentinel keys. A `LevelIterator` now only advance the file iterator once the sentinel key is processed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10449 Test Plan: - Added many unit tests in db_range_del_test - Stress test: `./db_stress --readpercent=5 --prefixpercent=19 --writepercent=20 -delpercent=10 --iterpercent=44 --delrangepercent=2` - Additional iterator stress test is added to verify against iterators against expected state: https://github.com/facebook/rocksdb/issues/10538. This is based on ajkr's previous attempt https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913. ``` python3 ./tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --compression_type=none --max_background_compactions=8 --value_size_mult=33 --max_key=5000000 --interval=10 --duration=7200 --delrangepercent=3 --delpercent=9 --iterpercent=25 --writepercent=60 --readpercent=3 --prefixpercent=0 --num_iterations=1000 --range_deletion_width=100 --verify_iterator_with_expected_state_one_in=1 ``` - Performance benchmark: I used a similar setup as in the blog [post](http://rocksdb.org/blog/2018/11/21/delete-range.html) that introduced DeleteRange, "a database with 5 million data keys, and 10000 range tombstones (ignoring those dropped during compaction) that were written in regular intervals after 4.5 million data keys were written". As expected, the performance with this PR depends on the range tombstone width. ``` # Setup: TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=fillrandom --writes=4500000 --num=5000000 TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=overwrite --writes=500000 --num=5000000 --use_existing_db=true --writes_per_range_tombstone=50 # Scan entire DB TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=readseq[-X5] --use_existing_db=true --num=5000000 --disable_auto_compactions=true # Short range scan (10 Next()) TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=100000 --seek_nexts=10 --disable_auto_compactions=true # Long range scan(1000 Next()) TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=2500 --seek_nexts=1000 --disable_auto_compactions=true ``` Avg over of 10 runs (some slower tests had fews runs): For the first column (tombstone), 0 means no range tombstone, 100-10000 means width of the 10k range tombstones, and 1 means there is a single range tombstone in the entire DB (width is 1000). The 1 tombstone case is to test regression when there's very few range tombstones in the DB, as no range tombstone is likely to take a different code path than with range tombstones. - Scan entire DB | tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% | | ------------- | ------------- | ------------- | ------------- | | 0 range tombstone |2525600 (± 43564) |2486917 (± 33698) |-1.53% | | 100 |1853835 (± 24736) |2073884 (± 32176) |+11.87% | | 1000 |422415 (± 7466) |1115801 (± 22781) |+164.15% | | 10000 |22384 (± 227) |227919 (± 6647) |+918.22% | | 1 range tombstone |2176540 (± 39050) |2434954 (± 24563) |+11.87% | - Short range scan | tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% | | ------------- | ------------- | ------------- | ------------- | | 0 range tombstone |35398 (± 533) |35338 (± 569) |-0.17% | | 100 |28276 (± 664) |31684 (± 331) |+12.05% | | 1000 |7637 (± 77) |25422 (± 277) |+232.88% | | 10000 |1367 |28667 |+1997.07% | | 1 range tombstone |32618 (± 581) |32748 (± 506) |+0.4% | - Long range scan | tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% | | ------------- | ------------- | ------------- | ------------- | | 0 range tombstone |2262 (± 33) |2353 (± 20) |+4.02% | | 100 |1696 (± 26) |1926 (± 18) |+13.56% | | 1000 |410 (± 6) |1255 (± 29) |+206.1% | | 10000 |25 |414 |+1556.0% | | 1 range tombstone |1957 (± 30) |2185 (± 44) |+11.65% | - Microbench does not show significant regression: https://gist.github.com/cbi42/59f280f85a59b678e7e5d8561e693b61 Reviewed By: ajkr Differential Revision: D38450331 Pulled By: cbi42 fbshipit-source-id: b5ef12e8d8c289ed2e163ccdf277f5039b511fca |
2 years ago |
|
Akanksha Mahajan
|
4cd16d65ae |
Add new option num_file_reads_for_auto_readahead in BlockBasedTableOptions (#10556)
Summary: RocksDB does auto-readahead for iterators on noticing more than two reads for a table file if user doesn't provide readahead_size and reads are sequential. A new option num_file_reads_for_auto_readahead is added which can be configured and indicates after how many sequential reads prefetching should be start. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10556 Test Plan: Existing and new unit test Reviewed By: anand1976 Differential Revision: D38947147 Pulled By: akankshamahajan15 fbshipit-source-id: c9eeab495f84a8df7f701c42f04894e46440ad97 |
2 years ago |
|
anand76
|
5fbcc8c54d |
Update MULTIGET_IO_BATCH_SIZE for non-async MultiGet (#10622)
Summary: This stat was only getting updated in the async (coroutine) version of MultiGet. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10622 Reviewed By: akankshamahajan15 Differential Revision: D39188790 Pulled By: anand1976 fbshipit-source-id: 7e231507f65fc94c8a006c38f79dfba182a2c24a |
2 years ago |
|
sdong
|
9509003503 |
Option migration tool to break down files for FIFO compaction (#10600)
Summary: Right now, when the option migration tool migrates to FIFO compaction, it compacts all the data into one single SST file and move to L0. Although it creates a valid LSM-tree for FIFO, for any data to be deleted for FIFO, the giant file will be deleted, which might make the DB almost empty. There is not good solution for it, because usually we don't have enough information to reconstruct the FIFO LSM-tree. This change changes to a solution that compromises the FIFO condition. We hope the solution is more useable. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10600 Test Plan: Add unit tests for that. Reviewed By: jay-zhuang Differential Revision: D39106424 fbshipit-source-id: bdfd852c3b343373765b8d9716fefc08fd27145c |
2 years ago |
|
Hui Xiao
|
e484b81eee |
Sync dir containing CURRENT after RenameFile on CURRENT as much as possible (#10573)
Summary:
**Context:**
Below crash test revealed a bug that directory containing CURRENT file (short for `dir_contains_current_file` below) was not always get synced after a new CURRENT is created and being called with `RenameFile` as part of the creation.
This bug exposes a risk that such un-synced directory containing the updated CURRENT can’t survive a host crash (e.g, power loss) hence get corrupted. This then will be followed by a recovery from a corrupted CURRENT that we don't want.
The root-cause is that a nullptr `FSDirectory* dir_contains_current_file` sometimes gets passed-down to `SetCurrentFile()` hence in those case `dir_contains_current_file->FSDirectory::FsyncWithDirOptions()` will be skipped (which otherwise will internally call`Env/FS::SyncDic()` )
```
./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --allow_data_in_errors=True --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=8 --block_size=16384 --bloom_bits=134.8015470676662 --bottommost_compression_type=disable --cache_size=8388608 --checkpoint_one_in=1000000 --checksum_type=kCRC32c --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=2 --compaction_ttl=100 --compression_max_dict_buffer_bytes=511 --compression_max_dict_bytes=16384 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=65536 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --expected_values_dir=$exp --fail_if_options_file_error=1 --file_checksum_impl=none --flush_one_in=1000000 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=4 --ingest_external_file_one_in=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --mark_for_compaction_one_file_in=10 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=16384 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.001 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --mmap_read=1 --nooverwritepercent=1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_pinning=2 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=5 --prefixpercent=5 --prepopulate_block_cache=1 --progress_reports=0 --read_fault_one_in=1000 --readpercent=45 --recycle_log_file_num=0 --reopen=0 --ribbon_starting_level=999 --secondary_cache_fault_one_in=32 --secondary_cache_uri=compressed_secondary_cache://capacity=8388608 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --subcompactions=3 --sync_fault_injection=1 --target_file_size_base=2097 --target_file_size_multiplier=2 --test_batches_snapshots=1 --top_level_index_pinning=1 --use_full_merge_v1=1 --use_merge=1 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --write_buffer_size=4194 --writepercent=35
```
```
stderr:
WARNING: prefix_size is non-zero but memtablerep != prefix_hash
db_stress: utilities/fault_injection_fs.cc:748: virtual rocksdb::IOStatus rocksdb::FaultInjectionTestFS::RenameFile(const std::string &, const std::string &, const rocksdb::IOOptions &, rocksdb::IODebugContext *): Assertion `tlist.find(tdn.second) == tlist.end()' failed.`
```
**Summary:**
The PR ensured the non-test path pass down a non-null dir containing CURRENT (which is by current RocksDB assumption just db_dir) by doing the following:
- Renamed `directory_to_fsync` as `dir_contains_current_file` in `SetCurrentFile()` to tighten the association between this directory and CURRENT file
- Changed `SetCurrentFile()` API to require `dir_contains_current_file` being passed-in, instead of making it by default nullptr.
- Because `SetCurrentFile()`'s `dir_contains_current_file` is passed down from `VersionSet::LogAndApply()` then `VersionSet::ProcessManifestWrites()` (i.e, think about this as a chain of 3 functions related to MANIFEST update), these 2 functions also got refactored to require `dir_contains_current_file`
- Updated the non-test-path callers of these 3 functions to obtain and pass in non-nullptr `dir_contains_current_file`, which by current assumption of RocksDB, is the `FSDirectory* db_dir`.
- `db_impl` path will obtain `DBImpl::directories_.getDbDir()` while others with no access to such `directories_` are obtained on the fly by creating such object `FileSystem::NewDirectory(..)` and manage it by unique pointers to ensure short life time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10573
Test Plan:
- `make check`
- Passed the repro db_stress command
- For future improvement, since we currently don't assert dir containing CURRENT to be non-nullptr due to https://github.com/facebook/rocksdb/pull/10573#pullrequestreview-1087698899, there is still chances that future developers mistakenly pass down nullptr dir containing CURRENT thus resulting skipped sync dir and cause the bug again. Therefore a smarter test (e.g, such as quoted from ajkr "(make) unsynced data loss to be dropping files corresponding to unsynced directory entries") is still needed.
Reviewed By: ajkr
Differential Revision: D39005886
Pulled By: hx235
fbshipit-source-id: 336fb9090d0cfa6ca3dd580db86268007dde7f5a
|
2 years ago |
|
anand76
|
72a3fb3424 |
Update statistics for async scan readaheads (#10585)
Summary: Imported a fix to "rocksdb.prefetched.bytes.discarded" stat from https://github.com/facebook/rocksdb/issues/10561, and added a new stat "rocksdb.async.prefetch.abort.micros" to measure time spent waiting for async reads to abort. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10585 Reviewed By: akankshamahajan15 Differential Revision: D39067000 Pulled By: anand1976 fbshipit-source-id: d7cda71abb48017239bd5fd832345a16c7024faf |
2 years ago |
|
Peter Dillinger
|
c5afbbfe4b |
Don't wait for indirect flush in read-only DB (#10569)
Summary: Some APIs for getting live files, which are used by Checkpoint and BackupEngine, can optionally trigger and wait for a flush. These would deadlock when used on a read-only DB. Here we fix that by assuming the user wants the overall operation to succeed and is OK without flushing (because the DB is read-only). Follow-up work: the same or other issues can be hit by directly invoking some DB functions that are clearly not appropriate for read-only instance, but are not covered by overrides in DBImplReadOnly and CompactedDBImpl. These should be fixed to avoid similar problems on accidental misuse. (Long term, it would be nice to have a DBReadOnly class without those members, like BackupEngineReadOnly.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/10569 Test Plan: tests updated to catch regression (hang before the fix) Reviewed By: riversand963 Differential Revision: D38995759 Pulled By: pdillinger fbshipit-source-id: f5f8bc7123e13cb45bd393dd974d7d6eda20bc68 |
2 years ago |
|
Levi Tamasi
|
64e74723f7 |
Use the default metadata charge policy when creating an LRU cache via the Java API (#10577)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10577 Reviewed By: akankshamahajan15 Differential Revision: D39035884 Pulled By: ltamasi fbshipit-source-id: 48f116f8ca172b7eb5eb3651f39ddb891a7ffade |
2 years ago |
|
Jay Zhuang
|
d9e71fb2c5 |
Fix periodic_task unable to re-register the same task type (#10379)
Summary: Timer has a limitation that it cannot re-register a task with the same name, because the cancel only mark the task as invalid and wait for the Timer thread to clean it up later, before the task is cleaned up, the same task name cannot be added. Which makes the task option update likely to fail, which basically cancel and re-register the same task name. Change the periodic task name to a random unique id and store it in periodic_task_scheduler. Also refactor the `periodic_work` to `periodic_task` to make each job function as a `task`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10379 Test Plan: unittests Reviewed By: ajkr Differential Revision: D38000615 Pulled By: jay-zhuang fbshipit-source-id: e4135f9422e3b53aaec8eda54f4e18ce633a279e |
2 years ago |
|
Brendan MacDonell
|
418b36a9bc |
Support CompactionPri::kRoundRobin in RocksJava (#10572)
Summary: Pretty trivial — this PR just adds the new compaction priority to the Java API. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10572 Reviewed By: hx235 Differential Revision: D39006523 Pulled By: ajkr fbshipit-source-id: ea8d665817e7b05826c397afa41c3abcda81484e |
2 years ago |
|
Andrew Kryczka
|
7ad4b38617 |
Ensure writes to WAL tail during `FlushWAL(true /* sync */)` will be synced (#10560)
Summary: WAL append and switch can both happen between `FlushWAL(true /* sync */)`'s sync operations and its call to `MarkLogsSynced()`. We permit this since locks need to be released for the sync operations. Such an appended/switched WAL is both inactive and incompletely synced at the time `MarkLogsSynced()` processes it. Prior to this PR, `MarkLogsSynced()` assumed all inactive WALs were fully synced and removed them from consideration for future syncs. That was wrong in the scenario described above and led to the latest append(s) never being synced. This PR changes `MarkLogsSynced()` to only remove inactive WALs from consideration for which all flushed data has been synced. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10560 Test Plan: repro unit test for the scenario described above. Without this PR, it fails on "key2" not found Reviewed By: riversand963 Differential Revision: D38957391 Pulled By: ajkr fbshipit-source-id: da77175eba97ff251a4219b227b3bb2d4843ed26 |
2 years ago |
|
Changyu Bi
|
d140fbfd7d |
Add Iterator test against expected state to stress test (#10538)
Summary: As mentioned in https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913, `db_stress` does not have much verification for iterator correctness. It has a `TestIterate()` function, but that is mainly for comparing results between two iterators, one with `total_order_seek` and the other optionally sets auto_prefix, upper/lower bounds. Commit 49a0581ad2462e31aa3f768afa769e0d33390f33 added a new `TestIterateAgainstExpected()` function that compares iterator against expected state. It locks a range of keys, creates an iterator, does a random sequence of `Next/Prev` and compares against expected state. This PR is based on that commit, the main changes include some logs (for easier debugging if a test fails), a forward and backward scan to cover the entire locked key range, and a flag for optionally turning on this version of Iterator testing. Added constraint that the checks against expected state in `TestIterateAgainstExpected()` and in `TestGet()` are only turned on when `--skip_verifydb` flag is not set. Remove the change log introduced in https://github.com/facebook/rocksdb/issues/10553. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10538 Test Plan: Run `db_stress` with `--verify_iterator_with_expected_state_one_in=1`, and a large `--iterpercent` and `--num_iterations`. Checked `op_logs` manually to ensure expected coverage. Tweaked part of the code in https://github.com/facebook/rocksdb/issues/10449 and stress test was able to catch it. - internally run various flavor of crash test Reviewed By: ajkr Differential Revision: D38847269 Pulled By: cbi42 fbshipit-source-id: 8b4402a9bba9f6cfa08051943cd672579d489599 |
2 years ago |
|
muthukrishnan.s
|
79ed4be80f |
Add get_name, get_id for column family handle in C API (#10499)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10499 Reviewed By: hx235 Differential Revision: D38523859 Pulled By: ajkr fbshipit-source-id: 268bba1fcce4a3e20c51e498a79d7b476f663aea |
2 years ago |
|
Changyu Bi
|
198e5d8ee9 |
Update `TestGet()` to verify against expected state (#10553)
Summary: updated `TestGet()` in `no_batched_op_stress` to check the result of `Get()` operations against expected state (`expected_state_manager_`). More specifically, if `Get()` finds a key, expected state should not have `DELETION_SENTINEL` for the same key, and if `Get()` returns NotFound for a key, expected state should not have the key. One intention for this change it to verify correctness of code path change regarding range tombstones. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10553 Test Plan: run db_stress with nonzero readpercent: `./db_stress_branch --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4`. When I initially used wrong column family in `thread->shared->Get`, the test reported inconsistencies. Reviewed By: ajkr Differential Revision: D38927007 Pulled By: cbi42 fbshipit-source-id: f9f61b312ad0b4c21a799329609ba8526169b048 |
2 years ago |
|
Peter Dillinger
|
db7606a41a |
Fix "Behavior Changes" in 7.6 HISTORY.md (#10557)
Summary: see diff Pull Request resolved: https://github.com/facebook/rocksdb/pull/10557 Test Plan: no functional change Reviewed By: gitbw95 Differential Revision: D38950531 Pulled By: pdillinger fbshipit-source-id: af72e80a31d7df38f6e633fa7115984c2274ed60 |
2 years ago |
|
gitbw95
|
a9c2c7778d |
Update HISTORY.md for the upcoming 7.6 release (#10543)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10543 Reviewed By: anand1976 Differential Revision: D38877168 Pulled By: gitbw95 fbshipit-source-id: d6888f7dbb1f2a5bef144ad2443429a61663c1e8 |
2 years ago |
|
anand76
|
35cdd3e71e |
MultiGet async IO across multiple levels (#10535)
Summary: This PR exploits parallelism in MultiGet across levels. It applies only to the coroutine version of MultiGet. Previously, MultiGet file reads from SST files in the same level were parallelized. With this PR, MultiGet batches with keys distributed across multiple levels are read in parallel. This is accomplished by splitting the keys not present in a level (determined by bloom filtering) into a separate batch, and processing the new batch in parallel with the original batch. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10535 Test Plan: 1. Ensure existing MultiGet unit tests pass, updating them as necessary 2. New unit tests - TODO 3. Run stress test - TODO No noticeable regression (<1%) without async IO - Without PR: `multireadrandom : 7.261 micros/op 1101724 ops/sec 60.007 seconds 66110936 operations; 571.6 MB/s (8168992 of 8168992 found)` With PR: `multireadrandom : 7.305 micros/op 1095167 ops/sec 60.007 seconds 65717936 operations; 568.2 MB/s (8271992 of 8271992 found)` For a fully cached DB, but with async IO option on, no regression observed (<1%) - Without PR: `multireadrandom : 5.201 micros/op 1538027 ops/sec 60.005 seconds 92288936 operations; 797.9 MB/s (11540992 of 11540992 found) ` With PR: `multireadrandom : 5.249 micros/op 1524097 ops/sec 60.005 seconds 91452936 operations; 790.7 MB/s (11649992 of 11649992 found) ` Reviewed By: akankshamahajan15 Differential Revision: D38774009 Pulled By: anand1976 fbshipit-source-id: c955e259749f1c091590ade73105b3ee46cd0007 |
2 years ago |
|
anand76
|
2553d1efa1 |
Revert "Avoid dynamic memory allocation on read path (#10453)" (#10541)
Summary:
This reverts commit
|
2 years ago |
|
Bo Wang
|
13cb7a84b6 |
Fix the memory leak in db_stress tests that are caused by `FaultInjectionSecondaryCache` and add `CompressedSecondaryCache` into stress tests. (#10523)
Summary:
1. Fix the memory leak in db_stress tests that are caused by `FaultInjectionSecondaryCache`. To address the test requirements for both CompressedSecondaryCache and CachlibWrapper, a new class variable `base_is_compressed_sec_cache_` is added to determine the different behaviors in `Lookup()` and `WaitAll()`.
2. Add `CompressedSecondaryCache` into stress tests.
Before this PR, memory leak is reported during crash tests if `CompressedSecondaryCache` is in stress tests. One example is shown as follows:
```
==70722==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 6648240 byte(s) in 83103 object(s) allocated from:
#0 0x13de9d7 in operator new(unsigned long) (/data/sandcastle/boxes/eden-trunk-hg-fbcode-fbsource/fbcode/buck-out/dbgo/gen/aab7ed39/internal_repo_rocksdb/repo/db_stress+0x13de9d7)
https://github.com/facebook/rocksdb/issues/1 0x9084c7 in rocksdb::BlocklikeTraits<rocksdb::Block>::Create(rocksdb::BlockContents&&, unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*) internal_repo_rocksdb/repo/table/block_based/block_like_traits.h:128
https://github.com/facebook/rocksdb/issues/2 0x9084c7 in std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)::operator()(void const*, unsigned long, void**, unsigned long*) const internal_repo_rocksdb/repo/table/block_based/block_like_traits.h:34
https://github.com/facebook/rocksdb/issues/3 0x9082c9 in rocksdb::Block std::__invoke_impl<rocksdb::Status, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*, unsigned long, void**, unsigned long*>(std::__invoke_other, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*&&, unsigned long&&, void**&&, unsigned long*&&) third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/invoke.h:61
https://github.com/facebook/rocksdb/issues/4 0x90825d in std::enable_if<is_invocable_r_v<rocksdb::Block, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*, unsigned long, void**, unsigned long*>, rocksdb::Block>::type std::__invoke_r<rocksdb::Status, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*, unsigned long, void**, unsigned long*>(std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*&&, unsigned long&&, void**&&, unsigned long*&&) third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/invoke.h:114
https://github.com/facebook/rocksdb/issues/5 0x9081b0 in std::_Function_handler<rocksdb::Status (void const*, unsigned long, void**, unsigned long*), std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)>::_M_invoke(std::_Any_data const&, void const*&&, unsigned long&&, void**&&, unsigned long*&&) third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/std_function.h:291
https://github.com/facebook/rocksdb/issues/6 0x991f2c in std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)>::operator()(void const*, unsigned long, void**, unsigned long*) const third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/std_function.h:560
https://github.com/facebook/rocksdb/issues/7 0x990277 in rocksdb::CompressedSecondaryCache::Lookup(rocksdb::Slice const&, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, bool, bool&) internal_repo_rocksdb/repo/cache/compressed_secondary_cache.cc:77
https://github.com/facebook/rocksdb/issues/8 0xd3aa4d in rocksdb::FaultInjectionSecondaryCache::Lookup(rocksdb::Slice const&, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, bool, bool&) internal_repo_rocksdb/repo/utilities/fault_injection_secondary_cache.cc:92
https://github.com/facebook/rocksdb/issues/9 0xeadaab in rocksdb::lru_cache::LRUCacheShard::Lookup(rocksdb::Slice const&, unsigned int, rocksdb::Cache::CacheItemHelper const*, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, rocksdb::Cache::Priority, bool, rocksdb::Statistics*) internal_repo_rocksdb/repo/cache/lru_cache.cc:445
https://github.com/facebook/rocksdb/issues/10 0x1064573 in rocksdb::ShardedCache::Lookup(rocksdb::Slice const&, rocksdb::Cache::CacheItemHelper const*, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, rocksdb::Cache::Priority, bool, rocksdb::Statistics*) internal_repo_rocksdb/repo/cache/sharded_cache.cc:89
https://github.com/facebook/rocksdb/issues/11 0x8be0df in rocksdb::BlockBasedTable::GetEntryFromCache(rocksdb::CacheTier const&, rocksdb::Cache*, rocksdb::Slice const&, rocksdb::BlockType, bool, rocksdb::GetContext*, rocksdb::Cache::CacheItemHelper const*, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, rocksdb::Cache::Priority) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader.cc:389
https://github.com/facebook/rocksdb/issues/12 0x905790 in rocksdb::Status rocksdb::BlockBasedTable::GetDataBlockFromCache<rocksdb::Block>(rocksdb::Slice const&, rocksdb::Cache*, rocksdb::Cache*, rocksdb::ReadOptions const&, rocksdb::CachableEntry<rocksdb::Block>*, rocksdb::UncompressionDict const&, rocksdb::BlockType, bool, rocksdb::GetContext*) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader.cc:1263
https://github.com/facebook/rocksdb/issues/13 0x8b9259 in rocksdb::Status rocksdb::BlockBasedTable::MaybeReadBlockAndLoadToCache<rocksdb::Block>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, bool, bool, rocksdb::CachableEntry<rocksdb::Block>*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::BlockContents*, bool) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader.cc:1559
https://github.com/facebook/rocksdb/issues/14 0x8b710c in rocksdb::Status rocksdb::BlockBasedTable::RetrieveBlock<rocksdb::Block>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, rocksdb::CachableEntry<rocksdb::Block>*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, bool, bool, bool, bool) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader.cc:1726
https://github.com/facebook/rocksdb/issues/15 0x8c329f in rocksdb::DataBlockIter* rocksdb::BlockBasedTable::NewDataBlockIterator<rocksdb::DataBlockIter>(rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::DataBlockIter*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::FilePrefetchBuffer*, bool, bool, rocksdb::Status&) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader_impl.h:58
https://github.com/facebook/rocksdb/issues/16 0x920117 in rocksdb::BlockBasedTableIterator::InitDataBlock() internal_repo_rocksdb/repo/table/block_based/block_based_table_iterator.cc:262
https://github.com/facebook/rocksdb/issues/17 0x920d42 in rocksdb::BlockBasedTableIterator::MaterializeCurrentBlock() internal_repo_rocksdb/repo/table/block_based/block_based_table_iterator.cc:332
https://github.com/facebook/rocksdb/issues/18 0xc6a201 in rocksdb::IteratorWrapperBase<rocksdb::Slice>::PrepareValue() internal_repo_rocksdb/repo/table/iterator_wrapper.h:78
https://github.com/facebook/rocksdb/issues/19 0xc6a201 in rocksdb::IteratorWrapperBase<rocksdb::Slice>::PrepareValue() internal_repo_rocksdb/repo/table/iterator_wrapper.h:78
https://github.com/facebook/rocksdb/issues/20 0xef9f6c in rocksdb::MergingIterator::PrepareValue() internal_repo_rocksdb/repo/table/merging_iterator.cc:260
https://github.com/facebook/rocksdb/issues/21 0xc6a201 in rocksdb::IteratorWrapperBase<rocksdb::Slice>::PrepareValue() internal_repo_rocksdb/repo/table/iterator_wrapper.h:78
https://github.com/facebook/rocksdb/issues/22 0xc67bcd in rocksdb::DBIter::FindNextUserEntryInternal(bool, rocksdb::Slice const*) internal_repo_rocksdb/repo/db/db_iter.cc:326
https://github.com/facebook/rocksdb/issues/23 0xc66d36 in rocksdb::DBIter::FindNextUserEntry(bool, rocksdb::Slice const*) internal_repo_rocksdb/repo/db/db_iter.cc:234
https://github.com/facebook/rocksdb/issues/24 0xc7ab47 in rocksdb::DBIter::Next() internal_repo_rocksdb/repo/db/db_iter.cc:161
https://github.com/facebook/rocksdb/issues/25 0x70d938 in rocksdb::BatchedOpsStressTest::TestPrefixScan(rocksdb::ThreadState*, rocksdb::ReadOptions const&, std::vector<int, std::allocator<int> > const&, std::vector<long, std::allocator<long> > const&) internal_repo_rocksdb/repo/db_stress_tool/batched_ops_stress.cc:320
https://github.com/facebook/rocksdb/issues/26 0x6dc6a8 in rocksdb::StressTest::OperateDb(rocksdb::ThreadState*) internal_repo_rocksdb/repo/db_stress_tool/db_stress_test_base.cc:907
https://github.com/facebook/rocksdb/issues/27 0x6867de in rocksdb::ThreadBody(void*) internal_repo_rocksdb/repo/db_stress_tool/db_stress_driver.cc:33
https://github.com/facebook/rocksdb/issues/28 0xce4cc2 in rocksdb::(anonymous namespace)::StartThreadWrapper(void*) internal_repo_rocksdb/repo/env/env_posix.cc:461
https://github.com/facebook/rocksdb/issues/29 0x7f23f9068c0e in start_thread /home/engshare/third-party2/glibc/2.34/src/glibc-2.34/nptl/pthread_create.c:434:8
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10523
Test Plan:
```
$COMPILE_WITH_ASAN=1 make -j 24
$db_stress J=40 crash_test_with_txn
```
Reviewed By: anand1976
Differential Revision: D38646839
Pulled By: gitbw95
fbshipit-source-id: 9452895c7dc95481a9d7afe83b15193cf5b1c43e
|
2 years ago |
|
Andrew Kryczka
|
91166012c8 |
Prevent a case of WriteBufferManager flush thrashing (#6364)
Summary: Previously, the flushes triggered by `WriteBufferManager` could affect the same CF repeatedly if it happens to get consecutive writes. Such flushes are not particularly useful for reducing memory usage since they switch nearly-empty memtables to immutable while they've just begun filling their first arena block. In fact they may not even reduce the mutable memory count if they involve replacing one mutable memtable containing one arena block with a new mutable memtable containing one arena block. Further, if such switches happen even a few times before a flush finishes, the immutable memtable limit will be reached and writes will stall. This PR adds a heuristic to not switch memtables to immutable for CFs that already have one or more immutable memtables awaiting flush. There is a memory usage regression if the user continues writing to the same CF, that DB does not have any CFs eligible for switching, flushes are not finishing, and the `WriteBufferManager` was constructed with `allow_stall=false`. Before, it would grow by switching nearly empty memtables until writes stall. Now, it would grow by filling memtables until writes stall. This feels like an acceptable behavior change because users who prefer to stall over violate the memory limit should be using `allow_stall=true`, which is unaffected by this PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6364 Test Plan: - Command: `rm -rf /dev/shm/dbbench/ && TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num_multi_db=8 -num_column_families=2 -write_buffer_size=4194304 -db_write_buffer_size=16777216 -compression_type=none -statistics=true -target_file_size_base=4194304 -max_bytes_for_level_base=16777216` - `rocksdb.db.write.stall` count before this PR: 175 - `rocksdb.db.write.stall` count after this PR: 0 Reviewed By: jay-zhuang Differential Revision: D20167197 Pulled By: ajkr fbshipit-source-id: 4a64064e9bc33d57c0a35f15547542d0191d0cb7 |
2 years ago |