Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803
Test Plan: Build whole project using make and cmake.
Differential Revision: D17374550
fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
Following files were run through automatic formatter:
db/db_impl.cc
db/db_impl.h
db/db_impl_compaction_flush.cc
db/db_impl_debug.cc
db/db_impl_files.cc
db/db_impl_readonly.h
db/db_impl_write.cc
db/dbformat.cc
db/dbformat.h
table/block.cc
table/block.h
table/block_based_filter_block.cc
table/block_based_filter_block.h
table/block_based_filter_block_test.cc
table/block_based_table_builder.cc
table/block_based_table_reader.cc
table/block_based_table_reader.h
table/block_builder.cc
table/block_builder.h
table/block_fetcher.cc
table/block_prefix_index.cc
table/block_prefix_index.h
table/block_test.cc
table/format.cc
table/format.h
I could easily run all the files, but I don't want people to feel that
I'm doing it for lines of code changes :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5114
Differential Revision: D14633040
Pulled By: siying
fbshipit-source-id: 3f346cb53bf21e8c10704400da548dfce1e89a52
Summary:
Right now, users can change statistics.stats_level while DB is running, but TSAN may report
data race. We make stats_level_ to be atomic, and access them using accessors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5030
Differential Revision: D14267519
Pulled By: siying
fbshipit-source-id: 37d7ebeff7a43a406230143422a16af899163f73
Summary:
Statistics cost too much CPU for some use cases. Add two stats levels
so that people can choose to skip two types of expensive stats, timers and
histograms.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5027
Differential Revision: D14252765
Pulled By: siying
fbshipit-source-id: 75ecec9eaa44c06118229df4f80c366115346592
Summary:
This is essentially a re-submission of #4251 with a few improvements:
- Split `CompressionDict` into two separate classes: `CompressionDict` and `UncompressionDict`
- Eliminated `Init` functions. Instead do all initialization work in constructors.
- Added test case for parallel DB open, which is the scenario where #4251 failed under TSAN.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4849
Differential Revision: D13606039
Pulled By: ajkr
fbshipit-source-id: 08c236059798c710db9cbf545fce0f371232d447
Summary:
We carry compression type and "cachable" variables for every block in the block cache, while they take well-known values. 8-byte is wasted for each block (2-byte for useful information but it takes 8 bytes because of padding). With this change, these two variables are removed.
The cachable information is only useful in the process of reading the block. We use other information to infer from it. For compressed blocks, the compression type is a part of the block content itself so we can get it from there.
Some code is slightly refactored so that the cachable information can flow better.
Another change is to only use class BlockContents for compressed block, and narrow the class Block to only be used for uncompressed blocks, including blocks in compressed block cache. This can make the Block class less confusing. It also saves tens of bytes for each block in compressed block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4650
Differential Revision: D12969070
Pulled By: siying
fbshipit-source-id: 548b62724e9eb66993026429fd9c7c3acd1f95ed
Summary:
Rename the interface, as it is mean to be a generic interface for memory allocation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4590
Differential Revision: D10866340
Pulled By: yiwu-arbug
fbshipit-source-id: 85cb753351a40cb856c046aeaa3f3b369eef3d16
Summary:
This is a conceptually simple change, but it touches many files to
pass the allocator through function calls.
We introduce CacheAllocator, which can be used by clients to configure
custom allocator for cache blocks. Our motivation is to hook this up
with folly's `JemallocNodumpAllocator`
(f43ce6d686/folly/experimental/JemallocNodumpAllocator.h),
but there are many other possible use cases.
Additionally, this commit cleans up memory allocation in
`util/compression.h`, making sure that all allocations are wrapped in a
unique_ptr as soon as possible.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4437
Differential Revision: D10132814
Pulled By: yiwu-arbug
fbshipit-source-id: be1343a4b69f6048df127939fea9bbc96969f564
Summary:
Value delta encoding in format_version 4 requires the differences between the size of two consecutive handles to be sent to BlockBuilder::Add. This applies not only to indexes on blocks but also the indexes on indexes and filters in partitioned indexes and filters respectively. The patch fixes a bug where the partitioned filters would encode the entire size of the handle rather than the difference of the size with the last size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4381
Differential Revision: D9879505
Pulled By: maysamyabandeh
fbshipit-source-id: 27a22e49b482b927fbd5629dc310c46d63d4b6d1
Summary:
Reverting is needed to unblock a user building against master, who is blocked for multiple days due to a thread-safety issue in `GetEmptyDict`. We haven't been able to fix it quickly, so reverting.
Simply ran `git revert 6c40806e51a89386d2b066fddf73d3fd03a36f65`. There were no merge conflicts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4347
Differential Revision: D9668365
Pulled By: ajkr
fbshipit-source-id: 0c56334f0a23cf5ee0233d4e4679eae6709739cd
Summary:
In RocksDB, for a given SST file, all data blocks are compressed with the same dictionary. When we compress a block using the dictionary's raw bytes, the compression library first has to digest the dictionary to get it into a usable form. This digestion work is redundant and ideally should be done once per file.
ZSTD offers APIs for the caller to create and reuse a digested dictionary object (`ZSTD_CDict`). In this PR, we call `ZSTD_createCDict` once per file to digest the raw bytes. Then we use `ZSTD_compress_usingCDict` to compress each data block using the pre-digested dictionary. Once the file's created `ZSTD_freeCDict` releases the resources held by the digested dictionary.
There are a couple other changes included in this PR:
- Changed the parameter object for (un)compression functions from `CompressionContext`/`UncompressionContext` to `CompressionInfo`/`UncompressionInfo`. This avoids the previous pattern, where `CompressionContext`/`UncompressionContext` had to be mutated before calling a (un)compression function depending on whether dictionary should be used. I felt that mutation was error-prone so eliminated it.
- Added support for digested uncompression dictionaries (`ZSTD_DDict`) as well. However, this PR does not support reusing them across uncompression calls for the same file. That work is deferred to a later PR when we will store the `ZSTD_DDict` objects in block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4251
Differential Revision: D9257078
Pulled By: ajkr
fbshipit-source-id: 21b8cb6bbdd48e459f1c62343780ab66c0a64438
Summary:
Given that index value is a BlockHandle, which is basically an <offset, size> pair we can apply delta encoding on the values. The first value at each index restart interval encoded the full BlockHandle but the rest encode only the size. Refer to IndexBlockIter::DecodeCurrentValue for the detail of the encoding. This reduces the index size which helps using the block cache more efficiently. The feature is enabled with using format_version 4.
The feature comes with a bit of cpu overhead which should be paid back by the higher cache hits due to smaller index block size.
Results with sysbench read-only using 4k blocks and using 16 index restart interval:
Format 2:
19585 rocksdb read-only range=100
Format 3:
19569 rocksdb read-only range=100
Format 4:
19352 rocksdb read-only range=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3983
Differential Revision: D8361343
Pulled By: maysamyabandeh
fbshipit-source-id: f882ee082322acac32b0072e2bdbb0b5f854e651
Summary:
PR https://github.com/facebook/rocksdb/pull/3838 made some changes that triggers lint warnings.
Run `make format` to fix formatting as suggested by siying .
Also piggyback two changes:
1) fix singleton destruction order for windows and posix env
2) fix two clang warnings
Closes https://github.com/facebook/rocksdb/pull/3954
Differential Revision: D8272041
Pulled By: miasantreble
fbshipit-source-id: 7c4fd12bd17aac13534520de0c733328aa3c6c9f
Summary:
Windows does not have LD_PRELOAD mechanism to override all memory allocation functions and ZSTD makes use of C-tuntime calloc. During flushes and compactions default system allocator fragments and the system slows down considerably.
For builds with jemalloc we employ an advanced ZSTD context creation API that re-directs memory allocation to jemalloc. To reduce the cost of context creation on each block we cache ZSTD context within the block based table builder while a new SST file is being built, this will help all platform builds including those w/o jemalloc. This avoids system allocator fragmentation and improves the performance.
The change does not address random reads and currently on Windows reads with ZSTD regress as compared with SNAPPY compression.
Closes https://github.com/facebook/rocksdb/pull/3838
Differential Revision: D8229794
Pulled By: miasantreble
fbshipit-source-id: 719b622ab7bf4109819bc44f45ec66f0dd3ee80d
Summary:
- removed a few unneeded variables
- fused some variable declarations and their assignments
- fixed right-trimming code in string_util.cc to not underflow
- simplifed an assertion
- move non-nullptr check assertion before dereferencing of that pointer
- pass an std::string function parameter by const reference instead of by value (avoiding potential copy)
Closes https://github.com/facebook/rocksdb/pull/3507
Differential Revision: D7004679
Pulled By: sagar0
fbshipit-source-id: 52944952d9b56dfcac3bea3cd7878e315bb563c4
Summary:
NUMBER_BLOCK_DECOMPRESSED and NUMBER_BLOCK_COMPRESSED are not reported unless the stats level contain detailed timers, which is wrong. They are normal counters. Fix it.
Closes https://github.com/facebook/rocksdb/pull/3263
Differential Revision: D6552519
Pulled By: siying
fbshipit-source-id: 40899ccea7b2856bb39752616657c0bfd432f6f9
Summary:
Divide ReadBlockContents() to multiple sub-functions. Maintaining the input and intermediate data in a new class BlockFetcher.
I hope in general it makes the code easier to maintain.
Another motivation to do it is to clearly divide the logic before file reading and after file reading. The refactor will help us evaluate how can we make I/O async in the future.
Closes https://github.com/facebook/rocksdb/pull/3244
Differential Revision: D6520983
Pulled By: siying
fbshipit-source-id: 338d90bc0338472d46be7a7682028dc9114b12e9
Summary:
store a zero as the checksum when disabled since it's easier to keep block trailer a fixed length.
Closes https://github.com/facebook/rocksdb/pull/2781
Differential Revision: D5694702
Pulled By: ajkr
fbshipit-source-id: 69cea9da415778ba2b600dfd9d0dfc8cb5188ecd
Summary:
Right now, if direct I/O is enabled, prefetching the last 512KB cannot be applied, except compaction inputs or readahead is enabled for iterators. This can create a lot of I/O for HDD cases. To solve the problem, the 512KB is prefetched in block based table if direct I/O is enabled. The prefetched buffer is passed in totegher with random access file reader, so that we try to read from the buffer before reading from the file. This can be extended in the future to support flexible user iterator readahead too.
Closes https://github.com/facebook/rocksdb/pull/2708
Differential Revision: D5593091
Pulled By: siying
fbshipit-source-id: ee36ff6d8af11c312a2622272b21957a7b5c81e7
Summary:
We've got some DBs where iterators return Status with message "Corruption: block checksum mismatch" all the time. That's not very informative. It would be much easier to investigate if the error message contained the file name - then we would know e.g. how old the corrupted file is, which would be very useful for finding the root cause. This PR adds file name, offset and other stuff to some block corruption-related status messages.
It doesn't improve all the error messages, just a few that were easy to improve. I'm mostly interested in "block checksum mismatch" and "Bad table magic number" since they're the only corruption errors that I've ever seen in the wild.
Closes https://github.com/facebook/rocksdb/pull/2507
Differential Revision: D5345702
Pulled By: al13n321
fbshipit-source-id: fc8023d43f1935ad927cef1b9c55481ab3cb1339
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
This handles two issues: (1) range deletion iterator sometimes outlives
the table reader that created it, in which case the block must not be destroyed
during table reader destruction; and (2) we prefer to read these range tombstone
meta-blocks from file fewer times.
- Extracted cache-populating logic from NewDataBlockIterator() into a separate function: MaybeLoadDataBlockToCache()
- Use MaybeLoadDataBlockToCache() to load range deletion meta-block and pin it through the reader's lifetime. This code reuse works since range deletion meta-block has same format as data blocks.
- Use NewDataBlockIterator() to create range deletion iterators, which uses block cache if enabled, otherwise reads the block from file. Either way, the underlying block won't disappear until after the iterator is destroyed.
Closes https://github.com/facebook/rocksdb/pull/1459
Differential Revision: D4123175
Pulled By: ajkr
fbshipit-source-id: 8f64281
Summary:
ZSTD 1.0.0 is coming. We can finally add a support of ZSTD without worrying about compatibility.
Still keep ZSTDNotFinal for compatibility reason.
Test Plan: Run all tests. Run db_bench with ZSTD version with RocksDB built with ZSTD 1.0 and older.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: cyan, igor, IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63141
* Added new statistics and refactored to allow ioptions to be passed around as required to access environment and statistics pointers (and, as a convenient side effect, info_log pointer).
* Prevent incrementing compression counter when compression is turned off in options.
* Prevent incrementing compression counter when compression is turned off in options.
* Added two more supported compression types to test code in db_test.cc
* Prevent incrementing compression counter when compression is turned off in options.
* Added new StatsLevel that excludes compression timing.
* Fixed casting error in coding.h
* Fixed CompressionStatsTest for new StatsLevel.
* Removed unused variable that was breaking the Linux build
Summary:
I was investigating performance issues in the SstFileWriter and found all of the following:
- The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time. Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function.
- In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key.
- The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed. I added the move constructor which also required a copy constructor and assignment operator.
- The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added. I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value.
- The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function.
- BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key). It is more efficient just to copy the whole new key over.
- Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on.
- FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time.
- Each PutVarint??() function has a buffer and calls std::string::append(). Two or three calls in a row could share a buffer and a single call to std::string::append().
Some of these will be helpful outside of the SstFileWriter. I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility? I tried it on gcc 4.8 and 4.9.
Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added. The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas.
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59607
Summary:
Try to decompress compressed blocks when a special flag is set.
assert and crash in debug builds if we can't decompress the just-compressed input.
Test Plan: Run unit-tests.
Reviewers: dhruba, andrewkr, sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59145
Summary:
Added a new abstraction to cache page to RocksDB designed for the read
cache use.
RocksDB current block cache is more of an object cache. For the persistent read cache
project, what we need is a page cache equivalent. This changes adds a cache
abstraction to RocksDB to cache pages called PersistentCache. PersistentCache can cache
uncompressed pages or raw pages (content as in filesystem). The user can
choose to operate PersistentCache either in COMPRESSED or UNCOMPRESSED mode.
Blame Rev:
Test Plan: Run unit tests
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55707
Summary:
This adds a new metablock containing a shared dictionary that is used
to compress all data blocks in the SST file. The size of the shared dictionary
is configurable in CompressionOptions and defaults to 0. It's currently only
used for zlib/lz4/lz4hc, but the block will be stored in the SST regardless of
the compression type if the user chooses a nonzero dictionary size.
During compaction, computes the dictionary by randomly sampling the first
output file in each subcompaction. It pre-computes the intervals to sample
by assuming the output file will have the maximum allowable length. In case
the file is smaller, some of the pre-computed sampling intervals can be beyond
end-of-file, in which case we skip over those samples and the dictionary will
be a bit smaller. After the dictionary is generated using the first file in a
subcompaction, it is loaded into the compression library before writing each
block in each subsequent file of that subcompaction.
On the read path, gets the dictionary from the metablock, if it exists. Then,
loads that dictionary into the compression library before reading each block.
Test Plan: new unit test
Reviewers: yhchiang, IslamAbdelRahman, cyan, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52287
Comparable with Snappy on comp ratio.
Implemented using Windows API, does not require external package.
Avaiable since Windows 8 and server 2012.
Use -DXPRESS=1 with CMake to enable.
Summary:
Expose the inverse of ToString(hex=true) on Slice: Slice::DecodeHex
Refactor the other implementation of to/from hex in ldb_cmd.h to use the Slice
version
(Difference between the 2 is whether 0x is expected/produced in front of the hex
string or not)
Eliminated support for invalid odd length hex string - this is now invalid
instead of having 1/2 byte set
Added (inverse of HexToString) test for LDBCommand::StringToHex which also
indirectly tests Slice::ToString(true)
After moving the original implementation from ldb_cmd.h, updated it to much simpler/efficient version
(originally/inspired from https://github.com/facebook/wdt/blob/master/util/EncryptionUtils.cpp#L140-L169 )
Test Plan: run tests
Reviewers: uddipta, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56121
Summary: Add ZSTD compression type. The same way as adding LZ4.
Test Plan: run all tests. Generate files in db_bench. Make sure reads succeed. But the SST files cannot be opened in older versions. Also some other adhoc tests.
Reviewers: rven, anthony, IslamAbdelRahman, kradhakrishnan, igor
Reviewed By: igor
Subscribers: MarkCallaghan, maykov, yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45747
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
Summary:
Make it build for CYGWIN.
Need to define "-std=gnu++11" instead of "-std=c++11" and use some replacement functions.
Test Plan: Build it and run some unit tests in CYGWIN
Reviewers: yhchiang, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37605
Summary:
This diff adds BlockBasedTable format_version = 2. New format version brings better compressed block format for these compressions:
1) Zlib -- encode decompressed size in compressed block header
2) BZip2 -- encode decompressed size in compressed block header
3) LZ4 and LZ4HC -- instead of doing memcpy of size_t encode size as varint32. memcpy is very bad because the DB is not portable accross big/little endian machines or even platforms where size_t might be 8 or 4 bytes.
It does not affect format for snappy.
If you write a new database with format_version = 2, it will not be readable by RocksDB versions before 3.10. DB::Open() will return corruption in that case.
Test Plan:
Added a new test in db_test.
I will also run db_bench and verify VSIZE when block_cache == 1GB
Reviewers: yhchiang, rven, MarkCallaghan, dhruba, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31461
Summary:
In this diff I add another parameter to BlockBasedTableOptions that will let users specify block based table's format. This will greatly simplify block based table's format changes in the future.
First format change that this will support is encoding decompressed size in Zlib and BZip2 blocks. This diff is blocking https://reviews.facebook.net/D31311.
Test Plan: Added a unit tests. More tests to come as part of https://reviews.facebook.net/D31311.
Reviewers: dhruba, MarkCallaghan, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31383
Summary: We keep checksum functions in util/, there is no reason for compression to be in port/
Test Plan: compiles
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31281
Summary: So iOS size_t is 32-bit, so we need to static_cast<size_t> any uint64_t :(
Test Plan: TARGET_OS=IOS make static_lib
Reviewers: dhruba, ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28743
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
Summary: It turns out that -Wshadow has different rules for gcc than clang. Previous commit fixed clang. This commits fixes the rest of the warnings for gcc.
Test Plan: compiles
Reviewers: ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28131
sdong