Summary:
PreReleaseCallback meant to be called before the writes are visible to the readers. Since the sequence number is known after the WAL write, there is no reason to delay calling PreReleaseCallback to after the memtable write, which would complicates the reader's logic in presence of our memtable writes that are made visible by the other write thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5015
Differential Revision: D14221670
Pulled By: maysamyabandeh
fbshipit-source-id: a504dd665cf923226d7af09cc8e9c7739a25edc6
Summary:
Statistics cost too much CPU for some use cases. Add two stats levels
so that people can choose to skip two types of expensive stats, timers and
histograms.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5027
Differential Revision: D14252765
Pulled By: siying
fbshipit-source-id: 75ecec9eaa44c06118229df4f80c366115346592
Summary:
Measure CPU time consumed for a compaction and report it in the stats report
Enable NowCPUNanos() to work for MacOS
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4889
Differential Revision: D13701276
Pulled By: zinoale
fbshipit-source-id: 5024e5bbccd4dd10fd90d947870237f436445055
Summary:
The original implementation has two problems:
1. f0dda35d7d/db/db_impl_write.cc (L478)f0dda35d7d/db/write_thread.h (L231)
If the callback status of leader of the write_group fails, then the whole write_group will not write to WAL, this may cause data loss.
2. f0dda35d7d/db/write_thread.h (L130)
The annotation says that Writer.status is the status of memtable inserter, but the original implementation use it for another case which is not consistent with the original design. Looks like we can still reuse Writer.status, but we should modify the annotation, so Writer.status is not only the status of memtable inserter.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4838
Differential Revision: D13574070
Pulled By: yiwu-arbug
fbshipit-source-id: a2a2aefcfd329c4c6a91652bf090aaf1ce119c4b
Summary:
In the past, both `DBImpl::atomic_flush_` and
`DBImpl::immutable_db_options_.atomic_flush` exist. However, we fail to set
`immutable_db_options_.atomic_flush`, but use `DBImpl::atomic_flush_` which is
set correctly. This does not lead to incorrect behavior, but is a duplicate of
information.
Since `immutable_db_options_` is always there and has `atomic_flush`, we should
use it as source of truth and remove `DBImpl::atomic_flush_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4631
Differential Revision: D12928371
Pulled By: riversand963
fbshipit-source-id: f85a811959d3828aad4a3a1b05f71facf19c636d
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
For flush triggered by RocksDB due to memory usage approaching certain
threshold (WriteBufferManager or Memtable full), we should cut the memtable
only when the current active memtable is not empty, i.e. contains data. This is
what we do for non-atomic flush. If we always cut memtable even when the active
memtable is empty, we will generate extra, empty immutable memtable.
This is not ideal since it may cause write stall. It also causes some
DBAtomicFlushTest to fail because cfd->imm()->NumNotFlushed() is different from
expectation.
Test plan
```
$make clean && make J=1 -j32 all check
$make clean && OPT="-DROCKSDB_LITE -g" make J=1 -j32 all check
$make clean && TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make J=1 -j32 valgrind_test
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4595
Differential Revision: D12818520
Pulled By: riversand963
fbshipit-source-id: d867bdbeacf4199fdd642debb085f94703c41a18
Summary:
We would like to collect file-system-level statistics including file name, offset, length, return code, latency, etc., which requires to add callbacks to intercept file IO function calls when RocksDB is running.
To collect file-system-level statistics, users can inherit the class `EventListener`, as in `TestFileOperationListener `. Note that `TestFileOperationListener::ShouldBeNotifiedOnFileIO()` returns true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3933
Differential Revision: D10219571
Pulled By: riversand963
fbshipit-source-id: 7acc577a2d31097766a27adb6f78eaf8b1e8ff15
Summary:
There is a bug when the write queue leader is blocked on a write
delay/stop, and the queue has writers with WriteOptions::no_slowdown set
to true. They are not woken up until the write stall is cleared.
The fix introduces a dummy writer inserted at the tail to indicate a
write stall and prevent further inserts into the queue, and a condition
variable that writers who can tolerate slowdown wait on before adding
themselves to the queue. The leader calls WriteThread::BeginWriteStall()
to add the dummy writer and then walk the queue to fail any writers with
no_slowdown set. Once the stall clears, the leader calls
WriteThread::EndWriteStall() to remove the dummy writer and signal the
condition variable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4475
Differential Revision: D10285827
Pulled By: anand1976
fbshipit-source-id: 747465e5e7f07a829b1fb0bc1afcd7b93f4ab1a9
Summary:
This commit implements automatic recovery from a Status::NoSpace() error
during background operations such as write callback, flush and
compaction. The broad design is as follows -
1. Compaction errors are treated as soft errors and don't put the
database in read-only mode. A compaction is delayed until enough free
disk space is available to accomodate the compaction outputs, which is
estimated based on the input size. This means that users can continue to
write, and we rely on the WriteController to delay or stop writes if the
compaction debt becomes too high due to persistent low disk space
condition
2. Errors during write callback and flush are treated as hard errors,
i.e the database is put in read-only mode and goes back to read-write
only fater certain recovery actions are taken.
3. Both types of recovery rely on the SstFileManagerImpl to poll for
sufficient disk space. We assume that there is a 1-1 mapping between an
SFM and the underlying OS storage container. For cases where multiple
DBs are hosted on a single storage container, the user is expected to
allocate a single SFM instance and use the same one for all the DBs. If
no SFM is specified by the user, DBImpl::Open() will allocate one, but
this will be one per DB and each DB will recover independently. The
recovery implemented by SFM is as follows -
a) On the first occurance of an out of space error during compaction,
subsequent
compactions will be delayed until the disk free space check indicates
enough available space. The required space is computed as the sum of
input sizes.
b) The free space check requirement will be removed once the amount of
free space is greater than the size reserved by in progress
compactions when the first error occured
c) If the out of space error is a hard error, a background thread in
SFM will poll for sufficient headroom before triggering the recovery
of the database and putting it in write-only mode. The headroom is
calculated as the sum of the write_buffer_size of all the DB instances
associated with the SFM
4. EventListener callbacks will be called at the start and completion of
automatic recovery. Users can disable the auto recov ery in the start
callback, and later initiate it manually by calling DB::Resume()
Todo:
1. More extensive testing
2. Add disk full condition to db_stress (follow-on PR)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4164
Differential Revision: D9846378
Pulled By: anand1976
fbshipit-source-id: 80ea875dbd7f00205e19c82215ff6e37da10da4a
Summary:
RocksDB currently queues individual column family for flushing. This is not sufficient to support the needs of some applications that want to enforce order/dependency between column families, given that multiple foreground and background activities can trigger flushing in RocksDB.
This PR aims to address this limitation. Each flush request is described as a `FlushRequest` that can contain multiple column families. A background flushing thread pops one flush request from the queue at a time and processes it.
This PR does not enable atomic_flush yet, but is a subset of [PR 3752](https://github.com/facebook/rocksdb/pull/3752).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3952
Differential Revision: D8529933
Pulled By: riversand963
fbshipit-source-id: 78908a21e389a3a3f7de2a79bae0cd13af5f3539
Summary:
We want to sample the file I/O issued by RocksDB and report the function calls. This requires us to include the file paths otherwise it's hard to tell what has been going on.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4039
Differential Revision: D8670178
Pulled By: riversand963
fbshipit-source-id: 97ee806d1c583a2983e28e213ee764dc6ac28f7a
Summary:
HashMayMatch is related to AddKey() instead of CreateFilter().
Also applies some minor Fixes#4191#4200#3910
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4202
Differential Revision: D9180945
Pulled By: maysamyabandeh
fbshipit-source-id: 6f07b81c5bb9bda5c0273475b486ba8a030471e6
Summary:
A framework for tracing and replaying RocksDB operations.
A binary trace file is created by capturing the DB operations, and it can be replayed back at the same rate using db_bench.
- Column-families are supported
- Multi-threaded tracing is supported.
- TraceReader and TraceWriter are exposed to the user, so that tracing to various destinations can be enabled (say, to other messaging/logging services). By default, a FileTraceReader and FileTraceWriter are implemented to capture to a file and replay from it.
- This is not yet ideal to be enabled in production due to large performance overhead, but it can be safely tried out in a shadow setup, say, for analyzing RocksDB operations.
Currently supported DB operations:
- Writes:
-- Put
-- Merge
-- Delete
-- SingleDelete
-- DeleteRange
-- Write
- Reads:
-- Get (point lookups)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3837
Differential Revision: D7974837
Pulled By: sagar0
fbshipit-source-id: 8ec65aaf336504bc1f6ed0feae67f6ed5ef97a72
Summary:
This adds support for writing unprepared batches based on size defined in `TransactionOptions::max_write_batch_size`. This is done by overriding methods that modify data (Put/Delete/SingleDelete/Merge) and checking first if write batch size has exceeded threshold. If so, the write batch is written to DB as an unprepared batch.
Support for Commit/Rollback for unprepared batch is added as well. This has been done by simply extending the WritePrepared Commit/Rollback logic to take care of all unprep_seq numbers either when updating prepare heap, or adding to commit map. For updating the commit map, this logic exists inside `WriteUnpreparedCommitEntryPreReleaseCallback`.
A test change was also made to have transactions unregister themselves when committing without prepare. This is because with write unprepared, there may be unprepared entries (which act similarly to prepared entries) already when a commit is done without prepare.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4104
Differential Revision: D8785717
Pulled By: lth
fbshipit-source-id: c02006e281ec1ce00f628e2a7beec0ee73096a91
Summary:
Currently, if RocksDB encounters errors during a write operation (user requested or BG operations), it sets DBImpl::bg_error_ and fails subsequent writes. This PR allows the DB to be resumed for certain classes of errors. It consists of 3 parts -
1. Introduce Status::Severity in rocksdb::Status to indicate whether a given error can be recovered from or not
2. Refactor the error handling code so that setting bg_error_ and deciding on severity is in one place
3. Provide an API for the user to clear the error and resume the DB instance
This whole change is broken up into multiple PRs. Initially, we only allow clearing the error for Status::NoSpace() errors during background flush/compaction. Subsequent PRs will expand this to include more errors and foreground operations such as Put(), and implement a polling mechanism for out-of-space errors.
Closes https://github.com/facebook/rocksdb/pull/3997
Differential Revision: D8653831
Pulled By: anand1976
fbshipit-source-id: 6dc835c76122443a7668497c0226b4f072bc6afd
Summary:
DBTest.GroupCommitTest would often fail when run under valgrind because its sleeps were insufficient to guarantee a group commit had multiple entries. Instead we can use sync point to force a leader to wait until a non-leader thread has enqueued its work, thus guaranteeing a leader can do group commit work for multiple threads.
Closes https://github.com/facebook/rocksdb/pull/3883
Differential Revision: D8079429
Pulled By: ajkr
fbshipit-source-id: 61dc50fad29d2c85547842f681288de60fa29049
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
Summary:
There's a group of stats in PerfContext for profiling the write path. They break down the write time into WAL write, memtable insert, throttling, and everything else. We use these stats a lot for figuring out the cause of slow writes.
These stats got a bit out of date and are now categorizing some interesting things as "everything else", and also do some double counting. This PR fixes it and adds two new stats: time spent waiting for other threads of the batch group, and time spent waiting for scheduling flushes/compactions. Probably these will be enough to explain all the occasional abnormally slow (multiple seconds) writes that we're seeing.
Closes https://github.com/facebook/rocksdb/pull/3602
Differential Revision: D7251562
Pulled By: al13n321
fbshipit-source-id: 0a2d0f5a4fa5677455e1f566da931cb46efe2a0d
Summary:
When using two_write_queue, the published seq and the last allocated sequence could be ahead of the LastSequence, even if both write queues are stopped as in WriteRecoverableState. The patch fixes a bug in WriteRecoverableState in which LastSequence was used as a reference but the result was applied to last fetched sequence and last published seq.
Closes https://github.com/facebook/rocksdb/pull/3665
Differential Revision: D7446099
Pulled By: maysamyabandeh
fbshipit-source-id: 1449bed9aed8e9db6af85946efd347cb8efd3c0b
Summary:
Currently if the CommitTimeWriteBatch is set to be used only as a state that is required only for recovery , the user cannot see that in DB until it is restarted. This while the state is already inserted into the DB after the memtable flush. It would be useful for debugging if make this state visible to the user after the flush by committing it. The patch does it by a invoking a callback that does the commit on the recoverable state.
Closes https://github.com/facebook/rocksdb/pull/3661
Differential Revision: D7424577
Pulled By: maysamyabandeh
fbshipit-source-id: 137f9408662f0853938b33fa440f27f04c1bbf5c
Summary:
Currently log_writer->AddRecord in WriteImpl is protected from concurrent calls via FlushWAL only if two_write_queues_ option is set. The patch fixes the problem by i) skip log_writer->AddRecord in FlushWAL if manual_wal_flush is not set, ii) protects log_writer->AddRecord in WriteImpl via log_write_mutex_ if manual_wal_flush_ is set but two_write_queues_ is not.
Fixes#3599
Closes https://github.com/facebook/rocksdb/pull/3656
Differential Revision: D7405608
Pulled By: maysamyabandeh
fbshipit-source-id: d6cc265051c77ae49c7c6df4f427350baaf46934
Summary:
Currently AddPrepared is performed only on the first sub-batch if there are duplicate keys in the write batch. This could cause a problem if the transaction takes too long to commit and the seq number of the first sub-patch moved to old_prepared_ but not the seq of the later ones. The patch fixes this by calling AddPrepared for all sub-patches.
Closes https://github.com/facebook/rocksdb/pull/3651
Differential Revision: D7388635
Pulled By: maysamyabandeh
fbshipit-source-id: 0ccd80c150d9bc42fe955e49ddb9d7ca353067b4
Summary:
It was misnamed. It actually updates `bg_error_` if `PreprocessWrite()` or `WriteToWAL()` fail, not related to the user callback.
Closes https://github.com/facebook/rocksdb/pull/3485
Differential Revision: D6955787
Pulled By: ajkr
fbshipit-source-id: bd7afc3fdb7a52830c021cbfc25fcbc3ab7d5e10
Summary:
This commit fixes a race condition on calling SetLastPublishedSequence. The function must be called only from the 2nd write queue when two_write_queues is enabled. However there was a bug that would also call it from the main write queue if CommitTimeWriteBatch is provided to the commit request and yet use_only_the_last_commit_time_batch_for_recovery optimization is not enabled. To fix that we penalize the commit request in such cases by doing an additional write solely to publish the seq number from the 2nd queue.
Closes https://github.com/facebook/rocksdb/pull/3641
Differential Revision: D7361508
Pulled By: maysamyabandeh
fbshipit-source-id: bf8f7a27e5cccf5425dccbce25eb0032e8e5a4d7
Summary:
In attempting to build a static lib for use in iOS, I ran in to lots of type errors between uint64_t and size_t. This PR contains the changes I made to get `TARGET_OS=IOS make static_lib` to succeed while also getting Xcode to build successfully with the resulting `librocksdb.a` library imported.
This also compiles for me on macOS and tests fine, but I'm really not sure if I made the correct decisions about where to `static_cast` and where to change types.
Also up for discussion: is iOS worth supporting? Getting the static lib is just part one, we aren't providing any bridging headers or wrappers like the ObjectiveRocks project, it won't be a great experience.
Closes https://github.com/facebook/rocksdb/pull/3503
Differential Revision: D7106457
Pulled By: gfosco
fbshipit-source-id: 82ac2073de7e1f09b91f6b4faea91d18bd311f8e
Summary:
Right now, users will encounter unexpected bahavior if they use key or value larger than 4GB. We should explicitly fail the queriers.
Closes https://github.com/facebook/rocksdb/pull/3484
Differential Revision: D6953895
Pulled By: siying
fbshipit-source-id: b60491e1af064fc5d52971956661f6c18ceac24f
Summary:
It's always a mystery from the logs why flush was triggered -- user triggered it manually, WriteBufferManager triggered it, logs were full, write buffer was full, etc.
This PR logs Flush reason whenever a flush is scheduled.
Closes https://github.com/facebook/rocksdb/pull/3401
Differential Revision: D6788142
Pulled By: miasantreble
fbshipit-source-id: a867e54d493c06adf5172bd36a180fb3faae3511
Summary:
This patch takes advantage of memtable being able to detect duplicate <key,seq> and returning TryAgain to handle duplicate keys in WritePrepared Txns. Through WriteBatchWithIndex's index it detects existence of at least a duplicate key in the write batch. If duplicate key was reported, it then pays the cost of counting the number of sub-patches by iterating over the write batch and pass it to DBImpl::Write. DB will make use of the provided batch_count to assign proper sequence numbers before sending them to the WAL. When later inserting the batch to the memtable, it increases the seq each time memtbale reports a duplicate (a sub-patch in our counting) and tries again.
Closes https://github.com/facebook/rocksdb/pull/3455
Differential Revision: D6873699
Pulled By: maysamyabandeh
fbshipit-source-id: db8487526c3a5dc1ddda0ea49f0f979b26ae648d
Summary:
There are a couple of places where we swallow any error from
WriteBuffer() - in SwitchMemtable() and DBImpl::CloseImpl(). Propagate
the error up in those cases rather than ignoring it.
Closes https://github.com/facebook/rocksdb/pull/3404
Differential Revision: D6879954
Pulled By: anand1976
fbshipit-source-id: 2ef88b554be5286b0a8bad7384ba17a105395bdb
Summary:
got confused while reading `FindObsoleteFiles` due to thinking it's a local variable, so renamed it properly
Closes https://github.com/facebook/rocksdb/pull/3342
Differential Revision: D6684797
Pulled By: ajkr
fbshipit-source-id: a4df0aae1cccce99d4dd4d164aadc85b17707132
Summary:
When there is a background error PreprocessWrite returns without marking the logs synced. If we keep need_log_sync to true, it would try to sync them at the end, which would break the logic. The patch would unset need_log_sync if the logs end up not being marked for sync in PreprocessWrite.
Closes https://github.com/facebook/rocksdb/pull/3293
Differential Revision: D6602347
Pulled By: maysamyabandeh
fbshipit-source-id: 37ee04209e8dcfd78de891654ce50d0954abeb38
Summary:
Currently WriteImplWALOnly simply returns when disableWAL is set. This is an incorrect behavior since it does not allocated the sequence number, which is a side-effect of writing to the WAL. This patch fixes the issue.
Closes https://github.com/facebook/rocksdb/pull/3262
Differential Revision: D6550974
Pulled By: maysamyabandeh
fbshipit-source-id: 745a83ae8f04e7ca6c8ffb247d6ef16c287c52e7
Summary:
Add PreReleaseCallback to be called at the end of WriteImpl but before publishing the sequence number. The callback is used in WritePrepareTxn to i) update the commit map, ii) update the last published sequence number in the 2nd write queue. It also ensures that all the commits will go to the 2nd queue.
These changes will ensure that the commit map is updated before the sequence number is published and used by reading snapshots. If we use two write queues, the snapshots will use the seq number published by the 2nd queue. If we use one write queue (the default, the snapshots will use the last seq number in the memtable, which also indicates the last published seq number.
Closes https://github.com/facebook/rocksdb/pull/3205
Differential Revision: D6438959
Pulled By: maysamyabandeh
fbshipit-source-id: f8b6c434e94bc5f5ab9cb696879d4c23e2577ab9
Summary:
This is a simpler version of #3097 by removing all unrelated changes.
Fixing the bug where concurrent writes may get Status::OK while it actually gets IOError on WAL write. This happens when multiple writes form a write batch group, and the leader get an IOError while writing to WAL. The leader failed to pass the error to followers in the group, and the followers end up returning Status::OK() while actually writing nothing. The bug only affect writes in a batch group. Future writes after the batch group will correctly return immediately with the IOError.
Closes https://github.com/facebook/rocksdb/pull/3201
Differential Revision: D6421644
Pulled By: yiwu-arbug
fbshipit-source-id: 1c2a455c5b73f6842423785eb8a9dbfbb191dc0e
Summary:
Refactor the logic around WriteCallback in the write path to clarify when and how exactly we advance the sequence number and making sure it is consistent across the code.
Closes https://github.com/facebook/rocksdb/pull/3168
Differential Revision: D6324312
Pulled By: maysamyabandeh
fbshipit-source-id: 9a34f479561fdb2a5d01ef6d37a28908d03bbe33
Summary:
Add a simple policy for NVMe write time life hint
Closes https://github.com/facebook/rocksdb/pull/3095
Differential Revision: D6298030
Pulled By: shligit
fbshipit-source-id: 9a72a42e32e92193af11599eb71f0cf77448e24d
Summary:
GetCommitTimeWriteBatch is currently used to store some state as part of commit in 2PC. In MyRocks it is specifically used to store some data that would be needed only during recovery. So it is not need to be stored in memtable right after each commit.
This patch enables an optimization to write the GetCommitTimeWriteBatch only to the WAL. The batch will be written to memtable during recovery when the WAL is replayed. To cover the case when WAL is deleted after memtable flush, the batch is also buffered and written to memtable right before each memtable flush.
Closes https://github.com/facebook/rocksdb/pull/3071
Differential Revision: D6148023
Pulled By: maysamyabandeh
fbshipit-source-id: 2d09bae5565abe2017c0327421010d5c0d55eaa7
Summary:
write_options.sync = true and write_options.disableWAL is incompatible. When WAL is disabled, we are not able to persist the write immediately. Return an error in this case to avoid misuse of the options.
Closes https://github.com/facebook/rocksdb/pull/3086
Differential Revision: D6176822
Pulled By: yiwu-arbug
fbshipit-source-id: 1eb10028c14fe7d7c13c8bc12c0ef659f75aa071
Summary:
Add a new function in Listener to let the caller know when rocksdb
is stalling writes.
Closes https://github.com/facebook/rocksdb/pull/2897
Differential Revision: D5860124
Pulled By: schischi
fbshipit-source-id: ee791606169aa64f772c86f817cebf02624e05e1
Maysam Yabandeh