Tag:
Branch:
Tree:
707f8d168a
main
oxigraph-8.1.1
oxigraph-8.3.2
oxigraph-main
${ noResults }
1215 Commits (707f8d168a6c81b11753e07d965e54cf02ddde09)
| Author | SHA1 | Message | Date |
|---|---|---|---|
Zhichao Cao
|
a4405fd981 |
fix lru caching test and fix reference binding to null pointer (#8326)
Summary: Fix for https://github.com/facebook/rocksdb/issues/8315. Inhe lru caching test, 5100 is not enough to hold meta block and first block in some random case, increase to 6100. Fix the reference binding to null pointer, use template. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8326 Test Plan: make check Reviewed By: pdillinger Differential Revision: D28625666 Pulled By: zhichao-cao fbshipit-source-id: 97b85306ae3d09bfb74addc7c65e57fe55a976a5 |
4 years ago |
|
Zhichao Cao
|
7303d02bdf |
Use new Insert and Lookup APIs in table reader to support secondary cache (#8315)
Summary: Secondary cache is implemented to achieve the secondary cache tier for block cache. New Insert and Lookup APIs are introduced in https://github.com/facebook/rocksdb/issues/8271 . To support and use the secondary cache in block based table reader, this PR introduces the corresponding callback functions that will be used in secondary cache, and update the Insert and Lookup APIs accordingly. benchmarking: ./db_bench --benchmarks="fillrandom" -num=1000000 -key_size=32 -value_size=256 -use_direct_io_for_flush_and_compaction=true -db=/tmp/rocks_t/db -partition_index_and_filters=true ./db_bench -db=/tmp/rocks_t/db -use_existing_db=true -benchmarks=readrandom -num=1000000 -key_size=32 -value_size=256 -use_direct_reads=true -cache_size=1073741824 -cache_numshardbits=5 -cache_index_and_filter_blocks=true -read_random_exp_range=17 -statistics -partition_index_and_filters=true -stats_dump_period_sec=30 -reads=50000000 master benchmarking results: readrandom : 3.923 micros/op 254881 ops/sec; 33.4 MB/s (23849796 of 50000000 found) rocksdb.db.get.micros P50 : 2.820992 P95 : 5.636716 P99 : 16.450553 P100 : 8396.000000 COUNT : 50000000 SUM : 179947064 Current PR benchmarking results readrandom : 4.083 micros/op 244925 ops/sec; 32.1 MB/s (23849796 of 50000000 found) rocksdb.db.get.micros P50 : 2.967687 P95 : 5.754916 P99 : 15.665912 P100 : 8213.000000 COUNT : 50000000 SUM : 187250053 About 3.8% throughput reduction. P50: 5.2% increasing, P95, 2.09% increasing, P99 4.77% improvement Pull Request resolved: https://github.com/facebook/rocksdb/pull/8315 Test Plan: added the testing case Reviewed By: anand1976 Differential Revision: D28599774 Pulled By: zhichao-cao fbshipit-source-id: 098c4df0d7327d3a546df7604b2f1602f13044ed |
4 years ago |
|
Peter Dillinger
|
3469d60fcc |
Add table properties for number of entries added to filters (#8323)
Summary: With Ribbon filter work and possible variance in actual bits per key (or prefix; general term "entry") to achieve certain FP rates, I've received a request to be able to track actual bits per key in generated filters. This change adds a num_filter_entries table property, which can be combined with filter_size to get bits per key (entry). This can vary from num_entries in at least these ways: * Different versions of same key are only counted once in filters. * With prefix filters, several user keys map to the same filter entry. * A single filter can include both prefixes and user keys. Note that FilterBlockBuilder::NumAdded() didn't do anything useful except distinguish empty from non-empty. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8323 Test Plan: basic unit test included, others updated Reviewed By: jay-zhuang Differential Revision: D28596210 Pulled By: pdillinger fbshipit-source-id: 529a111f3c84501e5a470bc84705e436ee68c376 |
4 years ago |
|
Peter Dillinger
|
311a544c2a |
Use deleters to label cache entries and collect stats (#8297)
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
|
4 years ago |
|
Levi Tamasi
|
d83542ca83 |
Make it possible to apply only a subrange of table property collectors (#8298)
Summary: This patch does two things: 1) Introduces some aliases in order to eliminate/prevent long-winded type names w/r/t the internal table property collectors (see e.g. `std::vector<std::unique_ptr<IntTblPropCollectorFactory>>`). 2) Makes it possible to apply only a subrange of table property collectors during table building by turning `TableBuilderOptions::int_tbl_prop_collector_factories` from a pointer to a `vector` into a range (i.e. a pair of iterators). Rationale: I plan to introduce a BlobDB related table property collector, which should only be applied during table creation if blob storage is enabled at the moment (which can be changed dynamically). This change will make it possible to include/ exclude the BlobDB related collector as needed without having to introduce a second `vector` of collectors in `ColumnFamilyData` with pretty much the same contents. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8298 Test Plan: `make check` Reviewed By: jay-zhuang Differential Revision: D28430910 Pulled By: ltamasi fbshipit-source-id: a81d28f2c59495865300f43deb2257d2e6977c8e |
4 years ago |
|
Jay Zhuang
|
d15fbae449 |
Refactor Option obj address from char* to void* (#8295)
Summary: And replace `reinterpret_cast` with `static_cast` or no cast. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8295 Test Plan: `make check` Reviewed By: mrambacher Differential Revision: D28420303 Pulled By: jay-zhuang fbshipit-source-id: 645be123a0df624dc2bea37cd54a35403fc494fa |
4 years ago |
|
mrambacher
|
8948dc8524 |
Make ImmutableOptions struct that inherits from ImmutableCFOptions and ImmutableDBOptions (#8262)
Summary: The ImmutableCFOptions contained a bunch of fields that belonged to the ImmutableDBOptions. This change cleans that up by introducing an ImmutableOptions struct. Following the pattern of Options struct, this class inherits from the DB and CFOption structs (of the Immutable form). Only one structural change (the ImmutableCFOptions::fs was changed to a shared_ptr from a raw one) is in this PR. All of the other changes involve moving the member variables from the ImmutableCFOptions into the ImmutableOptions and changing member variables or function parameters as required for compilation purposes. Follow-on PRs may do a further clean-up of the code, such as renaming variables (such as "ImmutableOptions cf_options") and potentially eliminating un-needed function parameters (there is no longer a need to pass both an ImmutableDBOptions and an ImmutableOptions to a function). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8262 Reviewed By: pdillinger Differential Revision: D28226540 Pulled By: mrambacher fbshipit-source-id: 18ae71eadc879dedbe38b1eb8e6f9ff5c7147dbf |
4 years ago |
|
Peter Dillinger
|
d2ca04e3ed |
Add more LSM info to FilterBuildingContext (#8246)
Summary: Add `num_levels`, `is_bottommost`, and table file creation `reason` to `FilterBuildingContext`, in anticipation of more powerful Bloom-like filter support. To support this, added `is_bottommost` and `reason` to `TableBuilderOptions`, which allowed removing `reason` parameter from `rocksdb::BuildTable`. I attempted to remove `skip_filters` from `TableBuilderOptions`, because filter construction decisions should arise from options, not one-off parameters. I could not completely remove it because the public API for SstFileWriter takes a `skip_filters` parameter, and translating this into an option change would mean awkwardly replacing the table_factory if it is BlockBasedTableFactory with new filter_policy=nullptr option. I marked this public skip_filters option as deprecated because of this oddity. (skip_filters on the read side probably makes sense.) At least `skip_filters` is now largely hidden for users of `TableBuilderOptions` and is no longer used for implementing the optimize_filters_for_hits option. Bringing the logic for that option closer to handling of FilterBuildingContext makes it more obvious that hese two are using the same notion of "bottommost." (Planned: configuration options for Bloom-like filters that generalize `optimize_filters_for_hits`) Recommended follow-up: Try to get away from "bottommost level" naming of things, which is inaccurate (see VersionStorageInfo::RangeMightExistAfterSortedRun), and move to "bottommost run" or just "bottommost." Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246 Test Plan: extended an existing unit test to exercise and check various filter building contexts. Also, existing tests for optimize_filters_for_hits validate some of the "bottommost" handling, which is now closely connected to FilterBuildingContext::is_bottommost through TableBuilderOptions::is_bottommost Reviewed By: mrambacher Differential Revision: D28099346 Pulled By: pdillinger fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a |
4 years ago |
|
Peter Dillinger
|
85becd94c1 |
Refactor: use TableBuilderOptions to reduce parameter lists (#8240)
Summary: Greatly reduced the not-quite-copy-paste giant parameter lists of rocksdb::NewTableBuilder, rocksdb::BuildTable, BlockBasedTableBuilder::Rep ctor, and BlockBasedTableBuilder ctor. Moved weird separate parameter `uint32_t column_family_id` of TableFactory::NewTableBuilder into TableBuilderOptions. Re-ordered parameters to TableBuilderOptions ctor, so that `uint64_t target_file_size` is not randomly placed between uint64_t timestamps (was easy to mix up). Replaced a couple of fields of BlockBasedTableBuilder::Rep with a FilterBuildingContext. The motivation for this change is making it easier to pass along more data into new fields in FilterBuildingContext (follow-up PR). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8240 Test Plan: ASAN make check Reviewed By: mrambacher Differential Revision: D28075891 Pulled By: pdillinger fbshipit-source-id: fddb3dbb8260a0e8bdcbb51b877ebabf9a690d4f |
4 years ago |
|
Akanksha Mahajan
|
a0e0feca62 |
Improve BlockPrefetcher to prefetch only for sequential scans (#7394)
Summary: BlockPrefetcher is used by iterators to prefetch data if they anticipate more data to be used in future and this is valid for forward sequential scans. But BlockPrefetcher tracks only num_file_reads_ and not if reads are sequential. This presents problem for MultiGet with large number of keys when it reseeks index iterator and data block. FilePrefetchBuffer can end up doing large readahead for reseeks as readahead size increases exponentially once readahead is enabled. Same issue is with BlockBasedTableIterator. Add previous length and offset read as well in BlockPrefetcher (creates FilePrefetchBuffer) and FilePrefetchBuffer (does prefetching of data) to determine if reads are sequential and then prefetch. Update the last block read after cache hit to take reads from cache also in account. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7394 Test Plan: Add new unit test case Reviewed By: anand1976 Differential Revision: D23737617 Pulled By: akankshamahajan15 fbshipit-source-id: 8e6917c25ed87b285ee495d1b68dc623d71205a3 |
4 years ago |
|
mrambacher
|
0ca6d6297f |
Rename variables in ImmutableCFOptions to avoid conflicts with ImmutableDBOptions (#8227)
Summary: Renaming ImmutableCFOptions::info_log and statistics to logger and stats. This is stage 2 in creating an ImmutableOptions class. It is necessary because the names match those in ImmutableOptions and have different types. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8227 Reviewed By: jay-zhuang Differential Revision: D28000967 Pulled By: mrambacher fbshipit-source-id: 3bf2aa04e8f1e8724d825b7deacf41080c14420b |
4 years ago |
|
mrambacher
|
6bab3a34e9 |
Move RegisterOptions into the Configurable API (#8223)
Summary: As previously coded, a Configurable extension would need access to code not in the public API. This change moves RegisterOptions into the Configurable class and therefore available to public extensions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8223 Reviewed By: anand1976 Differential Revision: D27960188 Pulled By: mrambacher fbshipit-source-id: ac88b19397183df633902def5b5701b9b65fbf40 |
4 years ago |
|
Saketh Are
|
cc1c3ee54e |
Eliminate double-buffering of keys in block_based_table_builder (#8219)
Summary: The block_based_table_builder buffers some blocks in memory to construct a good compression dictionary. Before this commit, the keys from each block were buffered separately for convenience. However, the buffered block data implicitly contains all keys. This commit eliminates the redundant key buffers and reduces memory usage. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8219 Reviewed By: ajkr Differential Revision: D27945851 Pulled By: saketh-are fbshipit-source-id: caf3cac1217201e080a1e24b542bedf20973afee |
4 years ago |
|
mrambacher
|
01e460d538 |
Make types of Immutable/Mutable Options fields match that of the underlying Option (#8176)
Summary: This PR is a first step at attempting to clean up some of the Mutable/Immutable Options code. With this change, a DBOption and a ColumnFamilyOption can be reconstructed from their Mutable and Immutable equivalents, respectively. readrandom tests do not show any performance degradation versus master (though both are slightly slower than the current 6.19 release). There are still fields in the ImmutableCFOptions that are not CF options but DB options. Eventually, I would like to move those into an ImmutableOptions (= ImmutableDBOptions+ImmutableCFOptions). But that will be part of a future PR to minimize changes and disruptions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8176 Reviewed By: pdillinger Differential Revision: D27954339 Pulled By: mrambacher fbshipit-source-id: ec6b805ba9afe6e094bffdbd76246c2d99aa9fad |
4 years ago |
|
Peter Dillinger
|
95f6add746 |
Revert Ribbon starting level support from #8198 (#8212)
Summary:
This partially reverts commit
|
4 years ago |
|
Peter Dillinger
|
10196d7edc |
Ribbon long-term support, starting level support (#8198)
Summary: Since the Ribbon filter schema seems good (compatible back to 6.15.0), this change commits to long term support of the SST schema, even though we expect the API for enabling Ribbon to change (still called NewExperimentalRibbonFilterPolicy). This also adds support for "hybrid" configuration in which some levels use Bloom (higher levels, lower numbered) for speed and the rest use Ribbon (lower levels, higher numbered) for memory space efficiency. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8198 Test Plan: unit test added, crash test support Reviewed By: jay-zhuang Differential Revision: D27831232 Pulled By: pdillinger fbshipit-source-id: 90e528677689474d293ed6710b42ba89fbd5b5ab |
4 years ago |
|
Yanqin Jin
|
09528f9fa1 |
Fix a bug for SeekForPrev with partitioned filter and prefix (#8137)
Summary: According to https://github.com/facebook/rocksdb/issues/5907, each filter partition "should include the bloom of the prefix of the last key in the previous partition" so that SeekForPrev() in prefix mode can return correct result. The prefix of the last key in the previous partition does not necessarily have the same prefix as the first key in the current partition. Regardless of the first key in current partition, the prefix of the last key in the previous partition should be added. The existing code, however, does not follow this. Furthermore, there is another issue: when finishing current filter partition, `FullFilterBlockBuilder::AddPrefix()` is called for the first key in next filter partition, which effectively overwrites `last_prefix_str_` prematurely. Consequently, when the filter block builder proceeds to the next partition, `last_prefix_str_` will be the prefix of its first key, leaving no way of adding the bloom of the prefix of the last key of the previous partition. Prefix extractor is FixedLength.2. ``` [ filter part 1 ] [ filter part 2 ] abc d ``` When SeekForPrev("abcd"), checking the filter partition will land on filter part 2 because "abcd" > "abc" but smaller than "d". If the filter in filter part 2 happens to return false for the test for "ab", then SeekForPrev("abcd") will build incorrect iterator tree in non-total-order mode. Also fix a unit test which starts to fail following this PR. `InDomain` should not fail due to assertion error when checking on an arbitrary key. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8137 Test Plan: ``` make check ``` Without this fix, the following command will fail pretty soon. ``` ./db_stress --acquire_snapshot_one_in=10000 --avoid_flush_during_recovery=0 \ --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 \ --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=17 \ --bottommost_compression_type=disable --cache_index_and_filter_blocks=1 --cache_size=1048576 \ --checkpoint_one_in=0 --checksum_type=kxxHash64 --clear_column_family_one_in=0 \ --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_ttl=0 \ --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 \ --compression_parallel_threads=1 --compression_type=zstd --compression_zstd_max_train_bytes=0 \ --continuous_verification_interval=0 --db=/dev/shm/rocksdb/rocksdb_crashtest_whitebox \ --db_write_buffer_size=8388608 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --enable_blob_files=0 \ --enable_compaction_filter=0 --enable_pipelined_write=1 --file_checksum_impl=big --flush_one_in=1000000 \ --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 \ --get_sorted_wal_files_one_in=0 --index_block_restart_interval=4 --index_type=2 --ingest_external_file_one_in=0 \ --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True \ --log2_keys_per_lock=10 --long_running_snapshots=1 --mark_for_compaction_one_file_in=0 \ --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=100000000 --max_key_len=3 \ --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=3 \ --max_write_buffer_size_to_maintain=8388608 --memtablerep=skip_list --mmap_read=1 --mock_direct_io=False \ --nooverwritepercent=0 --open_files=500000 --ops_per_thread=20000000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=1 --partition_pinning=0 --pause_background_one_in=1000000 \ --periodic_compaction_seconds=0 --prefixpercent=5 --progress_reports=0 --read_fault_one_in=0 --read_only=0 \ --readpercent=45 --recycle_log_file_num=0 --reopen=20 --secondary_catch_up_one_in=0 \ --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 \ --sst_file_manager_bytes_per_truncate=0 --subcompactions=2 --sync=0 --sync_fault_injection=False \ --target_file_size_base=2097152 --target_file_size_multiplier=2 --test_batches_snapshots=0 --test_cf_consistency=0 \ --top_level_index_pinning=0 --unpartitioned_pinning=1 --use_blob_db=0 --use_block_based_filter=0 \ --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 \ --use_multiget=0 --use_ribbon_filter=0 --use_txn=0 --user_timestamp_size=8 --verify_checksum=1 \ --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --write_buffer_size=4194304 \ --write_dbid_to_manifest=1 --writepercent=35 ``` Reviewed By: pdillinger Differential Revision: D27553054 Pulled By: riversand963 fbshipit-source-id: 60e391e4a2d8d98a9a3172ec5d6176b90ec3de98 |
4 years ago |
|
sunby
|
c4d0e66d65 |
Remove check for status returned by `InvalidatePageCache` (#8156)
Summary: Failures in `InvalidatePageCache` will change the API contract. So we remove the status check for `InvalidatePageCache` in `SstFileWriter::Add()`, `SstFileWriter::Finish` and `Rep::DeleteRange` Pull Request resolved: https://github.com/facebook/rocksdb/pull/8156 Reviewed By: riversand963 Differential Revision: D27597012 Pulled By: ajkr fbshipit-source-id: 2872051695d50cc47ed0f2848dc582464c00076f |
4 years ago |
|
Zhichao Cao
|
17002365c1 |
Replace Status with IOStatus for block fetcher IO function (#8130)
Summary: To propagate the IOStatus from file reads to RocksDB read logic, some of the existing status needs to be replaced by IOStatus. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8130 Test Plan: make check Reviewed By: anand1976 Differential Revision: D27440188 Pulled By: zhichao-cao fbshipit-source-id: bbe7622c2106fe4e46871d60f7c26944e5030d78 |
4 years ago |
|
Andrew Kryczka
|
c43a37a922 |
Fix compression dictionary sampling with dedicated range tombstone SSTs (#8141)
Summary: Return early in case there are zero data blocks when `BlockBasedTableBuilder::EnterUnbuffered()` is called. This crash can only be triggered by applying dictionary compression to SST files that contain only range tombstones. It cannot be triggered by a low buffer limit alone since we only consider entering unbuffered mode after buffering a data block causing the limit to be breached, or `Finish()`ing the file. It also cannot be triggered by a totally empty file because those go through `Abandon()` rather than `Finish()` so unbuffered mode is never entered. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8141 Test Plan: added a unit test that repro'd the "Floating point exception" Reviewed By: riversand963 Differential Revision: D27495640 Pulled By: ajkr fbshipit-source-id: a463cfba476919dc5c5c380800a75a86c31ffa23 |
4 years ago |
|
Andrew Kryczka
|
1ba2b8a568 |
Add sample_for_compression results to table properties (#8139)
Summary:
Added `TableProperties::{fast,slow}_compression_estimated_data_size`.
These properties are present in block-based tables when
`ColumnFamilyOptions::sample_for_compression > 0` and the necessary
compression library is supported when the file is generated. They
contain estimates of what `TableProperties::data_size` would be if the
"fast"/"slow" compression library had been used instead. One
limitation is we do not record exactly which "fast" (ZSTD or Zlib)
or "slow" (LZ4 or Snappy) compression library produced the result.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8139
Test Plan:
- new unit test
- ran `db_bench` with `sample_for_compression=1`; verified the `data_size` property matches the `{slow,fast}_compression_estimated_data_size` when the same compression type is used for the output file compression and the sampled compression
Reviewed By: riversand963
Differential Revision: D27454338
Pulled By: ajkr
fbshipit-source-id: 9529293de93ddac7f03b2e149d746e9f634abac4
|
4 years ago |
|
Andrew Kryczka
|
c20a7cd6c7 |
Apply `sample_for_compression` to all block-based tables (#8105)
Summary: Previously it only applied to block-based tables generated by flush. This restriction was undocumented and blocked a new use case. Now compression sampling applies to all block-based tables we generate when it is enabled. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8105 Test Plan: new unit test Reviewed By: riversand963 Differential Revision: D27317275 Pulled By: ajkr fbshipit-source-id: cd9fcc5178d6515e8cb59c6facb5ac01893cb5b0 |
4 years ago |
|
Yanqin Jin
|
0304352882 |
Fix a bug in key comparison when index type is kBinarySearchWithFirstKey (#8062)
Summary: When timestamp is enabled, key comparison should take this into account. In `BlockBasedTableReader::Get()`, `BlockBasedTableReader::MultiGet()`, assume the target key is `key`, and the timestamp upper bound is `ts`. The highest key in current block is (key, ts1), while the lowest key in next block is (key, ts2). If ``` ts1 > ts > ts2 ``` then ``` (key, ts1) < (key, ts) < (key, ts2) ``` It can be shown that if `Compare()` is used, then we will mistakenly skip the next block. Instead, we should use `CompareWithoutTimestamp()`. The majority of this PR makes some existing tests in `db_with_timestamp_basic_test.cc` parameterized so that different index types can be tested. A new unit test is also added for more coverage. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8062 Test Plan: make check Reviewed By: ltamasi Differential Revision: D27057557 Pulled By: riversand963 fbshipit-source-id: c1062fa7c159ed600a1ad7e461531d52265021f1 |
4 years ago |
|
mrambacher
|
3dff28cf9b |
Use SystemClock* instead of std::shared_ptr<SystemClock> in lower level routines (#8033)
Summary: For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes. For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource. There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved. Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17: 6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found) 6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found) PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found) (Note that the times for 6.18 are prior to revert of the SystemClock). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033 Reviewed By: pdillinger Differential Revision: D27014563 Pulled By: mrambacher fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67 |
4 years ago |
|
Yanqin Jin
|
82b3888433 |
Enable backward iterator for keys with user-defined timestamp (#8035)
Summary: This PR does the following: - Enable backward iteration for keys with user-defined timestamp. Note that merge, single delete, range delete are not supported yet. - Introduces a new helper API `Comparator::EqualWithoutTimestamp()`. - Fix a typo in `SetTimestamp()`. - Add/update unit tests Run db_bench (built with DEBUG_LEVEL=0) to demonstrate that no overhead is introduced for CPU-intensive workloads with a lot of `Prev()`. Also provided results of iterating keys with timestamps. 1. Disable timestamp, run: ``` ./db_bench -db=/dev/shm/rocksdb -disable_wal=1 -benchmarks=fillseq,seekrandom[-W1-X6] -reverse_iterator=1 -seek_nexts=5 ``` Results: > Baseline > - seekrandom [AVG 6 runs] : 96115 ops/sec; 53.2 MB/sec > - seekrandom [MEDIAN 6 runs] : 98075 ops/sec; 54.2 MB/sec > > This PR > - seekrandom [AVG 6 runs] : 95521 ops/sec; 52.8 MB/sec > - seekrandom [MEDIAN 6 runs] : 96338 ops/sec; 53.3 MB/sec 2. Enable timestamp, run: ``` ./db_bench -user_timestamp_size=8 -db=/dev/shm/rocksdb -disable_wal=1 -benchmarks=fillseq,seekrandom[-W1-X6] -reverse_iterator=1 -seek_nexts=5 ``` Result: > Baseline: not supported > > This PR > - seekrandom [AVG 6 runs] : 90514 ops/sec; 50.1 MB/sec > - seekrandom [MEDIAN 6 runs] : 90834 ops/sec; 50.2 MB/sec Pull Request resolved: https://github.com/facebook/rocksdb/pull/8035 Reviewed By: ltamasi Differential Revision: D26926668 Pulled By: riversand963 fbshipit-source-id: 95330cc2242397c03e09d29e5417dfb0adc98ef5 |
4 years ago |
|
Peter Dillinger
|
0028e3398b |
Make format_version=5 new default (#8017)
Summary: Haven't seen any production issues with new Bloom filter and it's now > 1 year old (added in 6.6.0). Updated check_format_compatible.sh and HISTORY.md Pull Request resolved: https://github.com/facebook/rocksdb/pull/8017 Test Plan: tests updated (or prior bugs fixed) Reviewed By: ajkr Differential Revision: D26762197 Pulled By: pdillinger fbshipit-source-id: 0e755c46b443087c1544da0fd545beb9c403d1c2 |
4 years ago |
|
Peter Dillinger
|
a8b3b9a20c |
Refine Ribbon configuration, improve testing, add Homogeneous (#7879)
Summary:
This change only affects non-schema-critical aspects of the production candidate Ribbon filter. Specifically, it refines choice of internal configuration parameters based on inputs. The changes are minor enough that the schema tests in bloom_test, some of which depend on this, are unaffected. There are also some minor optimizations and refactorings.
This would be a schema change for "smash" Ribbon, to fix some known issues with small filters, but "smash" Ribbon is not accessible in public APIs. Unit test CompactnessAndBacktrackAndFpRate updated to test small and medium-large filters. Run with --thoroughness=100 or so for much better detection power (not appropriate for continuous regression testing).
Homogenous Ribbon:
This change adds internally a Ribbon filter variant we call Homogeneous Ribbon, in collaboration with Stefan Walzer. The expected "result" value for every key is zero, instead of computed from a hash. Entropy for queries not to be false positives comes from free variables ("overhead") in the solution structure, which are populated pseudorandomly. Construction is slightly faster for not tracking result values, and never fails. Instead, FP rate can jump up whenever and whereever entries are packed too tightly. For small structures, we can choose overhead to make this FP rate jump unlikely, as seen in updated unit test CompactnessAndBacktrackAndFpRate.
Unlike standard Ribbon, Homogeneous Ribbon seems to scale to arbitrary number of keys when accepting an FP rate penalty for small pockets of high FP rate in the structure. For example, 64-bit ribbon with 8 solution columns and 10% allocated space overhead for slots seems to achieve about 10.5% space overhead vs. information-theoretic minimum based on its observed FP rate with expected pockets of degradation. (FP rate is close to 1/256.) If targeting a higher FP rate with fewer solution columns, Homogeneous Ribbon can be even more space efficient, because the penalty from degradation is relatively smaller. If targeting a lower FP rate, Homogeneous Ribbon is less space efficient, as more allocated overhead is needed to keep the FP rate impact of degradation relatively under control. The new OptimizeHomogAtScale tool in ribbon_test helps to find these optimal allocation overheads for different numbers of solution columns. And Ribbon widths, with 128-bit Ribbon apparently cutting space overheads in half vs. 64-bit.
Other misc item specifics:
* Ribbon APIs in util/ribbon_config.h now provide configuration data for not just 5% construction failure rate (95% success), but also 50% and 0.1%.
* Note that the Ribbon structure does not exhibit "threshold" behavior as standard Xor filter does, so there is a roughly fixed space penalty to cut construction failure rate in half. Thus, there isn't really an "almost sure" setting.
* Although we can extrapolate settings for large filters, we don't have a good formula for configuring smaller filters (< 2^17 slots or so), and efforts to summarize with a formula have failed. Thus, small data is hard-coded from updated FindOccupancy tool.
* Enhances ApproximateNumEntries for public API Ribbon using more precise data (new API GetNumToAdd), thus a more accurate but not perfect reversal of CalculateSpace. (bloom_test updated to expect the greater precision)
* Move EndianSwapValue from coding.h to coding_lean.h to keep Ribbon code easily transferable from RocksDB
* Add some missing 'const' to member functions
* Small optimization to 128-bit BitParity
* Small refactoring of BandingStorage in ribbon_alg.h to support Homogeneous Ribbon
* CompactnessAndBacktrackAndFpRate now has an "expand" test: on construction failure, a possible alternative to re-seeding hash functions is simply to increase the number of slots (allocated space overhead) and try again with essentially the same hash values. (Start locations will be different roundings of the same scaled hash values--because fastrange not mod.) This seems to be as effective or more effective than re-seeding, as long as we increase the number of slots (m) by roughly m += m/w where w is the Ribbon width. This way, there is effectively an expansion by one slot for each ribbon-width window in the banding. (This approach assumes that getting "bad data" from your hash function is as unlikely as it naturally should be, e.g. no adversary.)
* 32-bit and 16-bit Ribbon configurations are added to ribbon_test for understanding their behavior, e.g. with FindOccupancy. They are not considered useful at this time and not tested with CompactnessAndBacktrackAndFpRate.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7879
Test Plan: unit test updates included
Reviewed By: jay-zhuang
Differential Revision: D26371245
Pulled By: pdillinger
fbshipit-source-id: da6600d90a3785b99ad17a88b2a3027710b4ea3a
|
4 years ago |
|
xinyuliu
|
b085ee13e0 |
Append all characters not captured by xsputn() in overflow() function (#7991)
Summary:
In the adapter class `WritableFileStringStreamAdapter`, which wraps WritableFile to be used for std::ostream, previouly only `std::endl` is considered a special case because `endl` is written by `os.put()` directly without going through `xsputn()`. `os.put()` will call `sputc()` and if we further check the internal implementation of `sputc()`, we will see it is
```
int_type __CLR_OR_THIS_CALL sputc(_Elem _Ch) { // put a character
return 0 < _Pnavail() ? _Traits::to_int_type(*_Pninc() = _Ch) : overflow(_Traits::to_int_type(_Ch));
```
As we explicitly disabled buffering, _Pnavail() is always 0. Thus every write, not captured by xsputn, becomes an overflow.
When I run tests on Windows, I found not only `std::endl` will drop into this case, writing an unsigned long long will also call `os.put()` then followed by `sputc()` and eventually call `overflow()`. Therefore, instead of only checking `std::endl`, we should try to append other characters as well unless the appending operation fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7991
Reviewed By: jay-zhuang
Differential Revision: D26615692
Pulled By: ajkr
fbshipit-source-id: 4c0003de1645b9531545b23df69b000e07014468
|
4 years ago |
|
Akanksha Mahajan
|
cd79a00903 |
Make BlockBasedTable::kMaxAutoReadAheadSize configurable (#7951)
Summary: RocksDB does auto-readahead for iterators on noticing more than two reads for a table file. The readahead starts at 8KB and doubles on every additional read upto BlockBasedTable::kMaxAutoReadAheadSize which is 256*1024. This PR adds a new option BlockBasedTableOptions::max_auto_readahead_size which replaces BlockBasedTable::kMaxAutoReadAheadSize and the new option can be configured. If max_auto_readahead_size is set 0 then no implicit auto prefetching will be done. If max_auto_readahead_size provided is less than 8KB (which is initial readahead size used by rocksdb in case of auto-readahead), readahead size will remain same as max_auto_readahead_size. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7951 Test Plan: Add new unit test case. Reviewed By: anand1976 Differential Revision: D26568085 Pulled By: akankshamahajan15 fbshipit-source-id: b6543520fc74e97d859f2002328d4c5254d417af |
4 years ago |
|
sherriiiliu
|
e017af15c1 |
Fix testcase failures on windows (#7992)
Summary: Fixed 5 test case failures found on Windows 10/Windows Server 2016 1. In `flush_job_test`, the DestroyDir function fails in deconstructor because some file handles are still being held by VersionSet. This happens on Windows Server 2016, so need to manually reset versions_ pointer to release all file handles. 2. In `StatsHistoryTest.InMemoryStatsHistoryPurging` test, the capping memory cost of stats_history_size on Windows becomes 14000 bytes with latest changes, not just 13000 bytes. 3. In `SSTDumpToolTest.RawOutput` test, the output file handle is not closed at the end. 4. In `FullBloomTest.OptimizeForMemory` test, ROCKSDB_MALLOC_USABLE_SIZE is undefined on windows so `total_mem` is always equal to `total_size`. The internal memory fragmentation assertion does not apply in this case. 5. In `BlockFetcherTest.FetchAndUncompressCompressedDataBlock` test, XPRESS cannot reach 87.5% compression ratio with original CreateTable method, so I append extra zeros to the string value to enhance compression ratio. Beside, since XPRESS allocates memory internally, thus does not support for custom allocator verification, we will skip the allocator verification for XPRESS Pull Request resolved: https://github.com/facebook/rocksdb/pull/7992 Reviewed By: jay-zhuang Differential Revision: D26615283 Pulled By: ajkr fbshipit-source-id: 3632612f84b99e2b9c77c403b112b6bedf3b125d |
4 years ago |
|
Andrew Kryczka
|
daca92c17a |
Pick samples for compression dictionary using prime number (#7987)
Summary: The sample selection technique taken in https://github.com/facebook/rocksdb/issues/7970 was problematic because it had two code paths for sample selection depending on the number of data blocks, and one of those code paths involved an allocation. Using prime numbers, we can consolidate into one code path without allocation. The downside is there will be values of N (number of data blocks buffered) that suffer from poor spread in the selected samples. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7987 Test Plan: `make check -j48` Reviewed By: pdillinger Differential Revision: D26586147 Pulled By: ajkr fbshipit-source-id: 62028e54336fadb6e2c7a7fe6747daa05a263d32 |
4 years ago |
|
Andrew Kryczka
|
d904233d2f |
Limit buffering for collecting samples for compression dictionary (#7970)
Summary: For dictionary compression, we need to collect some representative samples of the data to be compressed, which we use to either generate or train (when `CompressionOptions::zstd_max_train_bytes > 0`) a dictionary. Previously, the strategy was to buffer all the data blocks during flush, and up to the target file size during compaction. That strategy allowed us to randomly pick samples from as wide a range as possible that'd be guaranteed to land in a single output file. However, some users try to make huge files in memory-constrained environments, where this strategy can cause OOM. This PR introduces an option, `CompressionOptions::max_dict_buffer_bytes`, that limits how much data blocks are buffered before we switch to unbuffered mode (which means creating the per-SST dictionary, writing out the buffered data, and compressing/writing new blocks as soon as they are built). It is not strict as we currently buffer more than just data blocks -- also keys are buffered. But it does make a step towards giving users predictable memory usage. Related changes include: - Changed sampling for dictionary compression to select unique data blocks when there is limited availability of data blocks - Made use of `BlockBuilder::SwapAndReset()` to save an allocation+memcpy when buffering data blocks for building a dictionary - Changed `ParseBoolean()` to accept an input containing characters after the boolean. This is necessary since, with this PR, a value for `CompressionOptions::enabled` is no longer necessarily the final component in the `CompressionOptions` string. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7970 Test Plan: - updated `CompressionOptions` unit tests to verify limit is respected (to the extent expected in the current implementation) in various scenarios of flush/compaction to bottommost/non-bottommost level - looked at jemalloc heap profiles right before and after switching to unbuffered mode during flush/compaction. Verified memory usage in buffering is proportional to the limit set. Reviewed By: pdillinger Differential Revision: D26467994 Pulled By: ajkr fbshipit-source-id: 3da4ef9fba59974e4ef40e40c01611002c861465 |
4 years ago |
|
Ziyue Yang
|
0c2d71edba |
Fix typo: replace readadhead with readahead (#7953)
Summary: This PR replaces several "readadhead" typos with "readahead". Pull Request resolved: https://github.com/facebook/rocksdb/pull/7953 Reviewed By: ajkr Differential Revision: D26518903 Pulled By: jay-zhuang fbshipit-source-id: 6f7dece0e39ec4f71c4a936399bcb2e02574f42a |
4 years ago |
|
Zhichao Cao
|
d1c510baec |
Handoff checksum Implementation (#7523)
Summary: in PR https://github.com/facebook/rocksdb/issues/7419 , we introduce the new Append and PositionedAppend APIs to WritableFile at File System, which enable RocksDB to pass the data verification information (e.g., checksum of the data) to the lower layer. In this PR, we use the new API in WritableFileWriter, such that the file created via WritableFileWrite can pass the checksum to the storage layer. To control which types file should apply the checksum handoff, we add checksum_handoff_file_types to DBOptions. User can use this option to control which file types (Currently supported file tyes: kLogFile, kTableFile, kDescriptorFile.) should use the new Append and PositionedAppend APIs to handoff the verification information. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7523 Test Plan: add new unit test, pass make check/ make asan_check Reviewed By: pdillinger Differential Revision: D24313271 Pulled By: zhichao-cao fbshipit-source-id: aafd69091ae85c3318e3e17cbb96fe7338da11d0 |
4 years ago |
|
Peter Dillinger
|
e4f1e64c30 |
Add prefetching (batched MultiGet) for experimental Ribbon filter (#7889)
Summary: Adds support for prefetching data in Ribbon queries, which especially optimizes batched Ribbon queries for MultiGet (~222ns/key to ~97ns/key) but also single key queries on cold memory (~333ns to ~226ns) because many queries span more than one cache line. This required some refactoring of the query algorithm, and there does not appear to be a noticeable regression in "hot memory" query times (perhaps from 48ns to 50ns). Pull Request resolved: https://github.com/facebook/rocksdb/pull/7889 Test Plan: existing unit tests, plus performance validation with filter_bench: Each data point is the best of two runs. I saturated the machine CPUs with other filter_bench runs in the background. Before: $ ./filter_bench -impl=3 -m_keys_total_max=200 -average_keys_per_filter=100000 -m_queries=50 WARNING: Assertions are enabled; benchmarks unnecessarily slow Building... Build avg ns/key: 125.86 Number of filters: 1993 Total size (MB): 168.166 Reported total allocated memory (MB): 183.211 Reported internal fragmentation: 8.94626% Bits/key stored: 7.05341 Prelim FP rate %: 0.951827 ---------------------------- Mixed inside/outside queries... Single filter net ns/op: 48.0111 Batched, prepared net ns/op: 222.384 Batched, unprepared net ns/op: 343.908 Skewed 50% in 1% net ns/op: 252.916 Skewed 80% in 20% net ns/op: 320.579 Random filter net ns/op: 332.957 After: $ ./filter_bench -impl=3 -m_keys_total_max=200 -average_keys_per_filter=100000 -m_queries=50 WARNING: Assertions are enabled; benchmarks unnecessarily slow Building... Build avg ns/key: 128.117 Number of filters: 1993 Total size (MB): 168.166 Reported total allocated memory (MB): 183.211 Reported internal fragmentation: 8.94626% Bits/key stored: 7.05341 Prelim FP rate %: 0.951827 ---------------------------- Mixed inside/outside queries... Single filter net ns/op: 49.8812 Batched, prepared net ns/op: 97.1514 Batched, unprepared net ns/op: 222.025 Skewed 50% in 1% net ns/op: 197.48 Skewed 80% in 20% net ns/op: 212.457 Random filter net ns/op: 226.464 Bloom comparison, for reference: $ ./filter_bench -impl=2 -m_keys_total_max=200 -average_keys_per_filter=100000 -m_queries=50 WARNING: Assertions are enabled; benchmarks unnecessarily slow Building... Build avg ns/key: 35.3042 Number of filters: 1993 Total size (MB): 238.488 Reported total allocated memory (MB): 262.875 Reported internal fragmentation: 10.2255% Bits/key stored: 10.0029 Prelim FP rate %: 0.965327 ---------------------------- Mixed inside/outside queries... Single filter net ns/op: 9.09931 Batched, prepared net ns/op: 34.21 Batched, unprepared net ns/op: 88.8564 Skewed 50% in 1% net ns/op: 139.75 Skewed 80% in 20% net ns/op: 181.264 Random filter net ns/op: 173.88 Reviewed By: jay-zhuang Differential Revision: D26378710 Pulled By: pdillinger fbshipit-source-id: 058428967c55ed763698284cd3b4bbe3351b6e69 |
4 years ago |
|
Andrew Kryczka
|
78ee8564ad |
Integrity protection for live updates to WriteBatch (#7748)
Summary: This PR adds the foundation classes for key-value integrity protection and the first use case: protecting live updates from the source buffers added to `WriteBatch` through the destination buffer in `MemTable`. The width of the protection info is not yet configurable -- only eight bytes per key is supported. This PR allows users to enable protection by constructing `WriteBatch` with `protection_bytes_per_key == 8`. It does not yet expose a way for users to get integrity protection via other write APIs (e.g., `Put()`, `Merge()`, `Delete()`, etc.). The foundation classes (`ProtectionInfo.*`) embed the coverage info in their type, and provide `Protect.*()` and `Strip.*()` functions to navigate between types with different coverage. For making bytes per key configurable (for powers of two up to eight) in the future, these classes are templated on the unsigned integer type used to store the protection info. That integer contains the XOR'd result of hashes with independent seeds for all covered fields. For integer fields, the hash is computed on the raw unadjusted bytes, so the result is endian-dependent. The most significant bytes are truncated when the hash value (8 bytes) is wider than the protection integer. When `WriteBatch` is constructed with `protection_bytes_per_key == 8`, we hold a `ProtectionInfoKVOTC` (i.e., one that covers key, value, optype aka `ValueType`, timestamp, and CF ID) for each entry added to the batch. The protection info is generated from the original buffers passed by the user, as well as the original metadata generated internally. When writing to memtable, each entry is transformed to a `ProtectionInfoKVOTS` (i.e., dropping coverage of CF ID and adding coverage of sequence number), since at that point we know the sequence number, and have already selected a memtable corresponding to a particular CF. This protection info is verified once the entry is encoded in the `MemTable` buffer. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7748 Test Plan: - an integration test to verify a wide variety of single-byte changes to the encoded `MemTable` buffer are caught - add to stress/crash test to verify it works in variety of configs/operations without intentional corruption - [deferred] unit tests for `ProtectionInfo.*` classes for edge cases like KV swap, `SliceParts` and `Slice` APIs are interchangeable, etc. Reviewed By: pdillinger Differential Revision: D25754492 Pulled By: ajkr fbshipit-source-id: e481bac6c03c2ab268be41359730f1ceb9964866 |
4 years ago |
|
mrambacher
|
4a09d632c4 |
Remove Legacy and Custom FileWrapper classes from header files (#7851)
Summary: Removed the uses of the Legacy FileWrapper classes from the source code. The wrappers were creating an additional layer of indirection/wrapping, as the Env already has a FileSystem. Moved the Custom FileWrapper classes into the CustomEnv, as these classes are really for the private use the the CustomEnv class. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7851 Reviewed By: anand1976 Differential Revision: D26114816 Pulled By: mrambacher fbshipit-source-id: db32840e58d969d3a0fa6c25aaf13d6dcdc74150 |
4 years ago |
|
mrambacher
|
12f1137355 |
Add a SystemClock class to capture the time functions of an Env (#7858)
Summary: Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock. Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock. There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc). Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858 Reviewed By: pdillinger Differential Revision: D26006406 Pulled By: mrambacher fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90 |
4 years ago |
|
Adam Retter
|
6e0f62f2b6 |
Add more tests to ASSERT_STATUS_CHECKED (3), API change (#7715)
Summary: Third batch of adding more tests to ASSERT_STATUS_CHECKED. * db_compaction_filter_test * db_compaction_test * db_dynamic_level_test * db_inplace_update_test * db_sst_test * db_tailing_iter_test * db_io_failure_test Also update GetApproximateSizes APIs to all return Status. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7715 Reviewed By: jay-zhuang Differential Revision: D25806896 Pulled By: pdillinger fbshipit-source-id: 6cb9d62ba5a756c645812754c596ad3995d7c262 |
4 years ago |
|
mrambacher
|
c1a65a4de4 |
Make StringEnv, StringSink, StringSource use FS classes (#7786)
Summary: Change the StringEnv and related classes to be based on FileSystem APIs rather than the corresponding Env ones. The StringSink and StringSource classes were changed to be based on the corresponding FS file classes. Part of a cleanup to use the newer interfaces. This change also eliminates some of the casts/wrappers to LegacyFile classes. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7786 Reviewed By: jay-zhuang Differential Revision: D25761460 Pulled By: anand1976 fbshipit-source-id: 428ae8e32b3db97dbeeca08c9d3bb0d9d4d3a38f |
4 years ago |
|
anand76
|
01298c8ff7 |
Return Status from FilePrefetchBuffer::TryReadFromCache() (#7816)
Summary: Return the Status from TryReadFromCache() in an argument to make it easier to report prefetch errors to the user. Tests: make crash_test make check Pull Request resolved: https://github.com/facebook/rocksdb/pull/7816 Reviewed By: akankshamahajan15 Differential Revision: D25717222 Pulled By: anand1976 fbshipit-source-id: c320d3c12d4146bda16df78ff6927eee584c1810 |
4 years ago |
|
mrambacher
|
55e99688cc |
No elide constructors (#7798)
Summary: Added "no-elide-constructors to the ASSERT_STATUS_CHECK builds. This flag gives more errors/warnings for some of the Status checks where an inner class checks a Status and later returns it. In this case, without the elide check on, the returned status may not have been checked in the caller, thereby bypassing the checked code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7798 Reviewed By: jay-zhuang Differential Revision: D25680451 Pulled By: pdillinger fbshipit-source-id: c3f14ed9e2a13f0a8c54d839d5fb4d1fc1e93917 |
4 years ago |
|
Akanksha Mahajan
|
30a5ed9c53 |
Update "num_data_read" stat in RetrieveMultipleBlocks (#7770)
Summary: RetrieveMultipleBlocks which is used by MultiGet to read data blocks is not updating num_data_read stat in GetContextStats. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7770 Test Plan: make check -j64 Reviewed By: anand1976 Differential Revision: D25538982 Pulled By: akankshamahajan15 fbshipit-source-id: e3daedb035b1be8ab6af6f115cb3793ccc7b1ec6 |
4 years ago |
|
mrambacher
|
02418194d7 |
Add more tests for assert status checked (#7524)
Summary: Added 10 more tests that pass the ASSERT_STATUS_CHECKED test. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7524 Reviewed By: akankshamahajan15 Differential Revision: D24323093 Pulled By: ajkr fbshipit-source-id: 28d4106d0ca1740c3b896c755edf82d504b74801 |
4 years ago |
|
Peter Dillinger
|
4d897e51df |
Migrate away from Travis+Linux+amd64 (#7791)
Summary: This disables Linux/amd64 builds in Travis for PRs, and adds a gcc-10+c++20 build in CircleCI, which should fill out sufficient coverage vs. what we had in Travis Fixed a use of std::is_pod, which is deprecated in c++20 Fixed ++ on a volatile in db_repl_stress.cc, with bigger refactoring. Although ++ on this volatile was probably ok with one thread writer and one thread reader, the code was still overly complex. There was a deadcode check for error `if (replThread.no_read < dataPump.no_records)` which can be proven never to happen based on the structure of the code. It infinite loops instead for the case intended to be checked. I just simplified the code for what should be the same checking power. Also most configurations seem to be using make parallelism = 2 * vcores, so fixing / using that. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7791 Test Plan: CI and `while ./db_repl_stress; do echo again; done` for a while Reviewed By: siying Differential Revision: D25669834 Pulled By: pdillinger fbshipit-source-id: b2c688053d0b1d52c989903449d3cd27a04130d6 |
4 years ago |
|
Peter Dillinger
|
4d1ac19e3d |
aggregated-table-properties with GetMapProperty (#7779)
Summary:
So that we can more easily get aggregate live table data such
as total filter, index, and data sizes.
Also adds ldb support for getting properties
Also fixed some missing/inaccurate related comments in db.h
For example:
$ ./ldb --db=testdb get_property rocksdb.aggregated-table-properties
rocksdb.aggregated-table-properties.data_size: 102871
rocksdb.aggregated-table-properties.filter_size: 0
rocksdb.aggregated-table-properties.index_partitions: 0
rocksdb.aggregated-table-properties.index_size: 2232
rocksdb.aggregated-table-properties.num_data_blocks: 100
rocksdb.aggregated-table-properties.num_deletions: 0
rocksdb.aggregated-table-properties.num_entries: 15000
rocksdb.aggregated-table-properties.num_merge_operands: 0
rocksdb.aggregated-table-properties.num_range_deletions: 0
rocksdb.aggregated-table-properties.raw_key_size: 288890
rocksdb.aggregated-table-properties.raw_value_size: 198890
rocksdb.aggregated-table-properties.top_level_index_size: 0
$ ./ldb --db=testdb get_property rocksdb.aggregated-table-properties-at-level1
rocksdb.aggregated-table-properties-at-level1.data_size: 80909
rocksdb.aggregated-table-properties-at-level1.filter_size: 0
rocksdb.aggregated-table-properties-at-level1.index_partitions: 0
rocksdb.aggregated-table-properties-at-level1.index_size: 1787
rocksdb.aggregated-table-properties-at-level1.num_data_blocks: 81
rocksdb.aggregated-table-properties-at-level1.num_deletions: 0
rocksdb.aggregated-table-properties-at-level1.num_entries: 12466
rocksdb.aggregated-table-properties-at-level1.num_merge_operands: 0
rocksdb.aggregated-table-properties-at-level1.num_range_deletions: 0
rocksdb.aggregated-table-properties-at-level1.raw_key_size: 238210
rocksdb.aggregated-table-properties-at-level1.raw_value_size: 163414
rocksdb.aggregated-table-properties-at-level1.top_level_index_size: 0
$
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7779
Test Plan: Added a test to ldb_test.py
Reviewed By: jay-zhuang
Differential Revision: D25653103
Pulled By: pdillinger
fbshipit-source-id: 2905469a08a64dd6b5510cbd7be2e64d3234d6d3
|
4 years ago |
|
Peter Dillinger
|
239d17a19c |
Support optimize_filters_for_memory for Ribbon filter (#7774)
Summary: Primarily this change refactors the optimize_filters_for_memory code for Bloom filters, based on malloc_usable_size, to also work for Ribbon filters. This change also replaces the somewhat slow but general BuiltinFilterBitsBuilder::ApproximateNumEntries with implementation-specific versions for Ribbon (new) and Legacy Bloom (based on a recently deleted version). The reason is to emphasize speed in ApproximateNumEntries rather than 100% accuracy. Justification: ApproximateNumEntries (formerly CalculateNumEntry) is only used by RocksDB for range-partitioned filters, called each time we start to construct one. (In theory, it should be possible to reuse the estimate, but the abstractions provided by FilterPolicy don't really make that workable.) But this is only used as a heuristic estimate for hitting a desired partitioned filter size because of alignment to data blocks, which have various numbers of unique keys or prefixes. The two factors lead us to prioritize reasonable speed over 100% accuracy. optimize_filters_for_memory adds extra complication, because precisely calculating num_entries for some allowed number of bytes depends on state with optimize_filters_for_memory enabled. And the allocator-agnostic implementation of optimize_filters_for_memory, using malloc_usable_size, means we would have to actually allocate memory, many times, just to precisely determine how many entries (keys) could be added and stay below some size budget, for the current state. (In a draft, I got this working, and then realized the balance of speed vs. accuracy was all wrong.) So related to that, I have made CalculateSpace, an internal-only API only used for testing, non-authoritative also if optimize_filters_for_memory is enabled. This simplifies some code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7774 Test Plan: unit test updated, and for FilterSize test, range of tested values is greatly expanded (still super fast) Also tested `db_bench -benchmarks=fillrandom,stats -bloom_bits=10 -num=1000000 -partition_index_and_filters -format_version=5 [-optimize_filters_for_memory] [-use_ribbon_filter]` with temporary debug output of generated filter sizes. Bloom+optimize_filters_for_memory: 1 Filter size: 197 (224 in memory) 134 Filter size: 3525 (3584 in memory) 107 Filter size: 4037 (4096 in memory) Total on disk: 904,506 Total in memory: 918,752 Ribbon+optimize_filters_for_memory: 1 Filter size: 3061 (3072 in memory) 110 Filter size: 3573 (3584 in memory) 58 Filter size: 4085 (4096 in memory) Total on disk: 633,021 (-30.0%) Total in memory: 634,880 (-30.9%) Bloom (no offm): 1 Filter size: 261 (320 in memory) 1 Filter size: 3333 (3584 in memory) 240 Filter size: 3717 (4096 in memory) Total on disk: 895,674 (-1% on disk vs. +offm; known tolerable overhead of offm) Total in memory: 986,944 (+7.4% vs. +offm) Ribbon (no offm): 1 Filter size: 2949 (3072 in memory) 1 Filter size: 3381 (3584 in memory) 167 Filter size: 3701 (4096 in memory) Total on disk: 624,397 (-30.3% vs. Bloom) Total in memory: 690,688 (-30.0% vs. Bloom) Note that optimize_filters_for_memory is even more effective for Ribbon filter than for cache-local Bloom, because it can close the unused memory gap even tighter than Bloom filter, because of 16 byte increments for Ribbon vs. 64 byte increments for Bloom. Reviewed By: jay-zhuang Differential Revision: D25592970 Pulled By: pdillinger fbshipit-source-id: 606fdaa025bb790d7e9c21601e8ea86e10541912 |
4 years ago |
|
Levi Tamasi
|
1afbd1948c |
Add initial blob support to batched MultiGet (#7766)
Summary: The patch adds initial support for reading blobs to the batched `MultiGet` API. The current implementation simply retrieves the blob values as the blob indexes are encountered; that is, reads from blob files are currently not batched. (This will be optimized in a separate phase.) In addition, the patch removes some dead code related to BlobDB from the batched `MultiGet` implementation, namely the `is_blob` / `is_blob_index` flags that are passed around in `DBImpl` and `MemTable` / `MemTableListVersion`. These were never hooked up to anything and wouldn't work anyways, since a single flag is not sufficient to communicate the "blobness" of multiple key-values. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7766 Test Plan: `make check` Reviewed By: jay-zhuang Differential Revision: D25479290 Pulled By: ltamasi fbshipit-source-id: 7aba2d290e31876ee592bcf1adfd1018713a8000 |
4 years ago |
|
Peter Dillinger
|
003e72b201 |
Use size_t for filter APIs, protect against overflow (#7726)
Summary: Deprecate CalculateNumEntry and replace with ApproximateNumEntries (better name) using size_t instead of int and uint32_t, to minimize confusing casts and bad overflow behavior (possible though probably not realistic). Bloom sizes are now explicitly capped at max size supported by implementations: just under 4GiB for fv=5 Bloom, and just under 512MiB for fv<5 Legacy Bloom. This hardening could help to set up for fuzzing. Also, since RocksDB only uses this information as an approximation for trying to hit certain sizes for partitioned filters, it's more important that the function be reasonably fast than for it to be completely accurate. It's hard enough to be 100% accurate for Ribbon (currently reversing CalculateSpace) that adding optimize_filters_for_memory into the mix is just not worth trying to be 100% accurate for num entries for bytes. Also: - Cleaned up filter_policy.h to remove MSVC warning handling and potentially unsafe use of exception for "not implemented" - Correct the number of entries limit beyond which current Ribbon implementation falls back on Bloom instead. - Consistently use "num_entries" rather than "num_entry" - Remove LegacyBloomBitsBuilder::CalculateNumEntry as it's essentially obsolete from general implementation BuiltinFilterBitsBuilder::CalculateNumEntries. - Fix filter_bench to skip some tests that don't make sense when only one or a small number of filters has been generated. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7726 Test Plan: expanded existing unit tests for CalculateSpace / ApproximateNumEntries. Also manually used filter_bench to verify Legacy and fv=5 Bloom size caps work (much too expensive for unit test). Note that the actual bits per key is below requested due to space cap. $ ./filter_bench -impl=0 -bits_per_key=20 -average_keys_per_filter=256000000 -vary_key_count_ratio=0 -m_keys_total_max=256 -allow_bad_fp_rate ... Total size (MB): 511.992 Bits/key stored: 16.777 ... $ ./filter_bench -impl=2 -bits_per_key=20 -average_keys_per_filter=2000000000 -vary_key_count_ratio=0 -m_keys_total_max=2000 ... Total size (MB): 4096 Bits/key stored: 17.1799 ... $ Reviewed By: jay-zhuang Differential Revision: D25239800 Pulled By: pdillinger fbshipit-source-id: f94e6d065efd31e05ec630ae1a82e6400d8390c4 |
4 years ago |
|
anand76
|
8a1488efbf |
Ensure that MultiGet works properly with compressed cache (#7756)
Summary: Ensure that when direct IO is enabled and a compressed block cache is configured, MultiGet inserts compressed data blocks into the compressed block cache. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7756 Test Plan: Add unit test to db_basic_test Reviewed By: cheng-chang Differential Revision: D25416240 Pulled By: anand1976 fbshipit-source-id: 75d57526370c9c0a45ff72651f3278dbd8a9086f |
4 years ago |