Summary:
Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter.
Speed
The improved speed, at least on recent x86_64, comes from
* Using fastrange instead of modulo (%)
* Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row.
* Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc.
* Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes.
Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed):
$ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter
Build avg ns/key: 47.7135
Mixed inside/outside queries...
Single filter net ns/op: 26.2825
Random filter net ns/op: 150.459
Average FP rate %: 0.954651
$ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter
Build avg ns/key: 47.2245
Mixed inside/outside queries...
Single filter net ns/op: 63.2978
Random filter net ns/op: 188.038
Average FP rate %: 1.13823
Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected.
The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome.
Accuracy
The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices
within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments.
Accuracy data (generalizes, except old impl gets worse with millions of keys):
Memory bits per key: FP rate percent old impl -> FP rate percent new impl
6: 5.70953 -> 5.69888
8: 2.45766 -> 2.29709
10: 1.13977 -> 0.959254
12: 0.662498 -> 0.411593
16: 0.353023 -> 0.0873754
24: 0.261552 -> 0.0060971
50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP)
Fixes https://github.com/facebook/rocksdb/issues/5857
Fixes https://github.com/facebook/rocksdb/issues/4120
Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized.
Compatibility
Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007
Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version).
Differential Revision: D18294749
Pulled By: pdillinger
fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
Summary:
- Updated our included xxhash implementation to version 0.7.2 (== the latest dev version as of 2019-10-09).
- Using XXH_NAMESPACE (like other fb projects) to avoid potential name collisions.
- Added fastrange64, and unit tests for it and fastrange32. These are faster alternatives to hash % range.
- Use preview version of XXH3 instead of MurmurHash64A for NPHash64
-- Had to update cache_test to increase probability of passing for any given hash function.
- Use fastrange64 instead of % with uses of NPHash64
-- Had to fix WritePreparedTransactionTest.CommitOfDelayedPrepared to avoid deadlock apparently caused by new hash collision.
- Set default seed for NPHash64 because specifying a seed rarely makes sense for it.
- Removed unnecessary include xxhash.h in a popular .h file
- Rename preview version of XXH3 to XXH3p for clarity and to ease backward compatibility in case final version of XXH3 is integrated.
Relying on existing unit tests for NPHash64-related changes. Each new implementation of fastrange64 passed unit tests when manipulating my local build to select it. I haven't done any integration performance tests, but I consider the improved performance of the pieces being swapped in to be well established.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5909
Differential Revision: D18125196
Pulled By: pdillinger
fbshipit-source-id: f6bf83d49d20cbb2549926adf454fd035f0ecc0d
Summary:
It's useful to be able to (optionally) associate key-value pairs with user-provided timestamps. This PR is an early effort towards this goal and continues the work of facebook#4942. A suite of new unit tests exist in DBBasicTestWithTimestampWithParam. Support for timestamp requires the user to provide timestamp as a slice in `ReadOptions` and `WriteOptions`. All timestamps of the same database must share the same length, format, etc. The format of the timestamp is the same throughout the same database, and the user is responsible for providing a comparator function (Comparator) to order the <key, timestamp> tuples. Once created, the format and length of the timestamp cannot change (at least for now).
Test plan (on devserver):
```
$COMPILE_WITH_ASAN=1 make -j32 all
$./db_basic_test --gtest_filter=Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/*
$make check
```
All tests must pass.
We also run the following db_bench tests to verify whether there is regression on Get/Put while timestamp is not enabled.
```
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillseq,readrandom -num=1000000
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=1000000
```
Repeat for 6 times for both versions.
Results are as follows:
```
| | readrandom | fillrandom |
| master | 16.77 MB/s | 47.05 MB/s |
| PR5079 | 16.44 MB/s | 47.03 MB/s |
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5079
Differential Revision: D15132946
Pulled By: riversand963
fbshipit-source-id: 833a0d657eac21182f0f206c910a6438154c742c
Summary:
Introducing Periodic Compactions.
This feature allows all the files in a CF to be periodically compacted. It could help in catching any corruptions that could creep into the DB proactively as every file is constantly getting re-compacted. And also, of course, it helps to cleanup data older than certain threshold.
- Introduced a new option `periodic_compaction_time` to control how long a file can live without being compacted in a CF.
- This works across all levels.
- The files are put in the same level after going through the compaction. (Related files in the same level are picked up as `ExpandInputstoCleanCut` is used).
- Compaction filters, if any, are invoked as usual.
- A new table property, `file_creation_time`, is introduced to implement this feature. This property is set to the time at which the SST file was created (and that time is given by the underlying Env/OS).
This feature can be enabled on its own, or in conjunction with `ttl`. It is possible to set a different time threshold for the bottom level when used in conjunction with ttl. Since `ttl` works only on 0 to last but one levels, you could set `ttl` to, say, 1 day, and `periodic_compaction_time` to, say, 7 days. Since `ttl < periodic_compaction_time` all files in last but one levels keep getting picked up based on ttl, and almost never based on periodic_compaction_time. The files in the bottom level get picked up for compaction based on `periodic_compaction_time`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5166
Differential Revision: D14884441
Pulled By: sagar0
fbshipit-source-id: 408426cbacb409c06386a98632dcf90bfa1bda47
Summary:
Since we are planning to use dictionary compression and to use different compression level, it is quite useful to add compression options to TableProperties. For example, in MyRocks, if the feature is available, we can query from information_schema.rocksdb_sst_props to see if all sst files are converted to ZSTD dictionary compressions. Resolves https://github.com/facebook/rocksdb/issues/4992
With this PR, user can query table properties through `GetPropertiesOfAllTables` API and get compression options as std::string:
`window_bits=-14; level=32767; strategy=0; max_dict_bytes=0; zstd_max_train_bytes=0; enabled=0;`
or table_properties->ToString() will also contain it
`# data blocks=1; # entries=13; # deletions=0; # merge operands=0; # range deletions=0; raw key size=143; raw average key size=11.000000; raw value size=39; raw average value size=3.000000; data block size=120; index block size (user-key? 0, delta-value? 0)=27; filter block size=0; (estimated) table size=147; filter policy name=N/A; prefix extractor name=nullptr; column family ID=0; column family name=default; comparator name=leveldb.BytewiseComparator; merge operator name=nullptr; property collectors names=[]; SST file compression algo=Snappy; SST file compression options=window_bits=-14; level=32767; strategy=0; max_dict_bytes=0; zstd_max_train_bytes=0; enabled=0; ; creation time=1552946632; time stamp of earliest key=1552946632;`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5081
Differential Revision: D14716692
Pulled By: miasantreble
fbshipit-source-id: 7d2f2cf84e052bff876e71b4212cfdebf5be32dd
Summary:
Following files were run through automatic formatter:
db/db_impl.cc
db/db_impl.h
db/db_impl_compaction_flush.cc
db/db_impl_debug.cc
db/db_impl_files.cc
db/db_impl_readonly.h
db/db_impl_write.cc
db/dbformat.cc
db/dbformat.h
table/block.cc
table/block.h
table/block_based_filter_block.cc
table/block_based_filter_block.h
table/block_based_filter_block_test.cc
table/block_based_table_builder.cc
table/block_based_table_reader.cc
table/block_based_table_reader.h
table/block_builder.cc
table/block_builder.h
table/block_fetcher.cc
table/block_prefix_index.cc
table/block_prefix_index.h
table/block_test.cc
table/format.cc
table/format.h
I could easily run all the files, but I don't want people to feel that
I'm doing it for lines of code changes :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5114
Differential Revision: D14633040
Pulled By: siying
fbshipit-source-id: 3f346cb53bf21e8c10704400da548dfce1e89a52
Summary:
This is a feature to sample data-block compressibility and and report them as stats. 1 in N (tunable) blocks is sampled for compressibility using two algorithms:
1. lz4 or snappy for fast compression
2. zstd or zlib for slow but higher compression.
The stats are reported to the caller as raw-bytes and compressed-bytes. The block continues to be compressed for storage using the specified CompressionType.
The db_bench_tool how has a command line option for specifying the sampling rate. It's default value is 0 (no sampling). To test the overhead for a certain value, users can compare the performance of db_bench_tool, varying the sampling rate. It is unlikely to have a noticeable impact for high values like 20.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4842
Differential Revision: D13629011
Pulled By: shobhitdayal
fbshipit-source-id: 14ca668bcab6499b2a1734edf848eb62a4f4fafa
Summary:
Statistics cost too much CPU for some use cases. Add two stats levels
so that people can choose to skip two types of expensive stats, timers and
histograms.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5027
Differential Revision: D14252765
Pulled By: siying
fbshipit-source-id: 75ecec9eaa44c06118229df4f80c366115346592
Summary:
MyRocks calls `GetForUpdate` on `INSERT`, for unique key check, and in almost all cases GetForUpdate returns empty result. For such cases, whole key bloom filter is helpful.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4985
Differential Revision: D14118257
Pulled By: miasantreble
fbshipit-source-id: d35cb7109c62fd5ad541a26968e3a3e16d3e85ea
Summary:
If `CompressionOptions::max_dict_bytes` and/or `CompressionOptions::zstd_max_train_bytes` are set, `SstFileWriter` will now generate files respecting those options.
I refactored the logic a bit for deciding when to use dictionary compression. Previously we plumbed `is_bottommost_level` down to the table builder and used that. However it was kind of confusing in `SstFileWriter`'s context since we don't know what level the file will be ingested to. Instead, now the higher-level callers (e.g., flush, compaction, file writer) are responsible for building the right `CompressionOptions` to give the table builder.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4978
Differential Revision: D14060763
Pulled By: ajkr
fbshipit-source-id: dc802c327896df2b319dc162d6acc82b9cdb452a
Summary:
Our previous approach was to train one compression dictionary per compaction, using the first output SST to train a dictionary, and then applying it on subsequent SSTs in the same compaction. While this was great for minimizing CPU/memory/I/O overhead, it did not achieve good compression ratios in practice. In our most promising potential use case, moderate reductions in a dictionary's scope make a major difference on compression ratio.
So, this PR changes compression dictionary to be scoped per-SST. It accepts the tradeoff during table building to use more memory and CPU. Important changes include:
- The `BlockBasedTableBuilder` has a new state when dictionary compression is in-use: `kBuffered`. In that state it accumulates uncompressed data in-memory whenever `Add` is called.
- After accumulating target file size bytes or calling `BlockBasedTableBuilder::Finish`, a `BlockBasedTableBuilder` moves to the `kUnbuffered` state. The transition (`EnterUnbuffered()`) involves sampling the buffered data, training a dictionary, and compressing/writing out all buffered data. In the `kUnbuffered` state, a `BlockBasedTableBuilder` behaves the same as before -- blocks are compressed/written out as soon as they fill up.
- Samples are now whole uncompressed data blocks, except the final sample may be a partial data block so we don't breach the user's configured `max_dict_bytes` or `zstd_max_train_bytes`. The dictionary trainer is supposed to work better when we pass it real units of compression. Previously we were passing 64-byte KV samples which was not realistic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4952
Differential Revision: D13967980
Pulled By: ajkr
fbshipit-source-id: 82bea6f7537e1529c7a1a4cdee84585f5949300f
Summary:
Always enable properties block checksum verification for block-based table. For external SST file ingested with 'write_global_seqno==true', we use 'DecodeEntrySlow' to parse its blocks' contents so that the process will not die upon failing the assertion possibly caused by corruption.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4956
Differential Revision: D14012741
Pulled By: riversand963
fbshipit-source-id: 8b766e6f54b36f8f9e074c0e19e0926ec3cce186
Summary:
before file ingestion (in preparation phase), verify the checksums of
the blocks of the external SST file, including properties block with global
seqno.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4916
Differential Revision: D13863501
Pulled By: riversand963
fbshipit-source-id: dc54697f970e3807832e2460f7228fcc7efe81ee
Summary:
- If block cache disabled or not used for meta-blocks, `BlockBasedTableReader::Rep::uncompression_dict` owns the `UncompressionDict`. It is preloaded during `PrefetchIndexAndFilterBlocks`.
- If block cache is enabled and used for meta-blocks, block cache owns the `UncompressionDict`, which holds dictionary and digested dictionary when needed. It is never prefetched though there is a TODO for this in the code. The cache key is simply the compression dictionary block handle.
- New stats for compression dictionary accesses in block cache: "BLOCK_CACHE_COMPRESSION_DICT_*" and "compression_dict_block_read_count"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4881
Differential Revision: D13663801
Pulled By: ajkr
fbshipit-source-id: bdcc54044e180855cdcc57639b493b0e016c9a3f
Summary:
This is essentially a re-submission of #4251 with a few improvements:
- Split `CompressionDict` into two separate classes: `CompressionDict` and `UncompressionDict`
- Eliminated `Init` functions. Instead do all initialization work in constructors.
- Added test case for parallel DB open, which is the scenario where #4251 failed under TSAN.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4849
Differential Revision: D13606039
Pulled By: ajkr
fbshipit-source-id: 08c236059798c710db9cbf545fce0f371232d447
Summary:
- To be consistent with the accounting of other optypes in `TableProperties`, we should count range tombstones in `TableProperties::num_entries` and `TableProperties::num_deletions`.
- Updated assertions in stress test's `OnTableFileCreated` handler to accept files with range tombstones only.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4841
Differential Revision: D13568424
Pulled By: ajkr
fbshipit-source-id: 0139d7806494eda20ece67ec460d2458dbbf6026
Summary:
Refactored and simplified `BlockBasedTable::Open` to be similar to `BlockBasedTableBuilder::Finish` as both these functions complement each other. Also added `BlockBasedTableBuilder::WriteFooter` along the way.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4636
Differential Revision: D12933319
Pulled By: sagar0
fbshipit-source-id: 1ff1d02f6d80a63b5ba720a1fc75e71c7344137b
Summary:
…ons (#4676)"
This reverts commit b32d087dbb.
`MemoryAllocator` needs to be with `Cache`, since cache entry can
outlive DB and block based table. The cache needs to hold reference to
memory allocator when deleting cache entry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4697
Differential Revision: D13133490
Pulled By: yiwu-arbug
fbshipit-source-id: 8ef7e8a51263bfd929f892fd062665ff4ce9ce5a
Summary:
We carry compression type and "cachable" variables for every block in the block cache, while they take well-known values. 8-byte is wasted for each block (2-byte for useful information but it takes 8 bytes because of padding). With this change, these two variables are removed.
The cachable information is only useful in the process of reading the block. We use other information to infer from it. For compressed blocks, the compression type is a part of the block content itself so we can get it from there.
Some code is slightly refactored so that the cachable information can flow better.
Another change is to only use class BlockContents for compressed block, and narrow the class Block to only be used for uncompressed blocks, including blocks in compressed block cache. This can make the Block class less confusing. It also saves tens of bytes for each block in compressed block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4650
Differential Revision: D12969070
Pulled By: siying
fbshipit-source-id: 548b62724e9eb66993026429fd9c7c3acd1f95ed
Summary:
Per offline discussion with siying, `MemoryAllocator` and `Cache` should be decouple. The idea is that memory allocator handles memory allocation, while cache handle cache policy.
It is normal that external cache libraries pack couple the two components for better optimization. If we want to integrate with such library in the future, we can make a wrapper of the library implementing both `Cache` and `MemoryAllocator` interface.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4676
Differential Revision: D13047662
Pulled By: yiwu-arbug
fbshipit-source-id: cd42e246d80ab600b4de47d073f7d2db308ce6dd
Summary:
Since the number of range deletions are reported in
TableProperties, it is confusing to not report the number of merge
operands and point deletions as top-level properties; they are
accessible through the public API, but since they are not the "main"
properties, they do not appear in aggregated table properties, or the
string representation of table properties.
This change promotes those two property keys to
`rocksdb/table_properties.h`, adds corresponding uint64 members for
them, deprecates the old access methods `GetDeletedKeys()` and
`GetMergeOperands()` (though they are still usable for now), and removes
`InternalKeyPropertiesCollector`. The property key strings are the same
as before this change, so this should be able to read DBs written from older
versions (though I haven't tested this yet).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4594
Differential Revision: D12826893
Pulled By: abhimadan
fbshipit-source-id: 9e4e4fbdc5b0da161c89582566d184101ba8eb68
Summary:
Rename the interface, as it is mean to be a generic interface for memory allocation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4590
Differential Revision: D10866340
Pulled By: yiwu-arbug
fbshipit-source-id: 85cb753351a40cb856c046aeaa3f3b369eef3d16
Summary:
This is a conceptually simple change, but it touches many files to
pass the allocator through function calls.
We introduce CacheAllocator, which can be used by clients to configure
custom allocator for cache blocks. Our motivation is to hook this up
with folly's `JemallocNodumpAllocator`
(f43ce6d686/folly/experimental/JemallocNodumpAllocator.h),
but there are many other possible use cases.
Additionally, this commit cleans up memory allocation in
`util/compression.h`, making sure that all allocations are wrapped in a
unique_ptr as soon as possible.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4437
Differential Revision: D10132814
Pulled By: yiwu-arbug
fbshipit-source-id: be1343a4b69f6048df127939fea9bbc96969f564
Summary:
Reverting is needed to unblock a user building against master, who is blocked for multiple days due to a thread-safety issue in `GetEmptyDict`. We haven't been able to fix it quickly, so reverting.
Simply ran `git revert 6c40806e51a89386d2b066fddf73d3fd03a36f65`. There were no merge conflicts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4347
Differential Revision: D9668365
Pulled By: ajkr
fbshipit-source-id: 0c56334f0a23cf5ee0233d4e4679eae6709739cd
Summary:
In RocksDB, for a given SST file, all data blocks are compressed with the same dictionary. When we compress a block using the dictionary's raw bytes, the compression library first has to digest the dictionary to get it into a usable form. This digestion work is redundant and ideally should be done once per file.
ZSTD offers APIs for the caller to create and reuse a digested dictionary object (`ZSTD_CDict`). In this PR, we call `ZSTD_createCDict` once per file to digest the raw bytes. Then we use `ZSTD_compress_usingCDict` to compress each data block using the pre-digested dictionary. Once the file's created `ZSTD_freeCDict` releases the resources held by the digested dictionary.
There are a couple other changes included in this PR:
- Changed the parameter object for (un)compression functions from `CompressionContext`/`UncompressionContext` to `CompressionInfo`/`UncompressionInfo`. This avoids the previous pattern, where `CompressionContext`/`UncompressionContext` had to be mutated before calling a (un)compression function depending on whether dictionary should be used. I felt that mutation was error-prone so eliminated it.
- Added support for digested uncompression dictionaries (`ZSTD_DDict`) as well. However, this PR does not support reusing them across uncompression calls for the same file. That work is deferred to a later PR when we will store the `ZSTD_DDict` objects in block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4251
Differential Revision: D9257078
Pulled By: ajkr
fbshipit-source-id: 21b8cb6bbdd48e459f1c62343780ab66c0a64438
Summary:
Add hash index support to data blocks, which helps to reduce the CPU utilization of point-lookup operations. This feature is backward compatible with the data block created without the hash index. It is disabled by default unless `BlockBasedTableOptions::data_block_index_type` is set to `data_block_index_type = kDataBlockBinaryAndHash.`
The DB size would be bigger with the hash index option as a hash table is added at the end of each data block. If the hash utilization ratio is 1:1, the space overhead is one byte per key. The hash table utilization ratio is adjustable using `BlockBasedTableOptions::data_block_hash_table_util_ratio`. A lower utilization ratio will improve more on the point-lookup efficiency, but take more space too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4174
Differential Revision: D8965914
Pulled By: fgwu
fbshipit-source-id: 1c6bae5d1fc39c80282d8890a72e9e67bc247198
Summary:
After refactoring in https://github.com/facebook/rocksdb/pull/4158 the properties block is written after the index block. This breaks the existing logic in estimating the index size in partitioned indexes. The patch fixes that by using the accurate index block size, which is available since by the time we write the properties block, the index block is already written.
The patch also fixes an issue in estimating the partition size with format_version=3 which was resulting into partitions smaller than the configured metadata_block_size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4259
Differential Revision: D9274454
Pulled By: maysamyabandeh
fbshipit-source-id: c82d045505cca3e7ed1a44ee1eaa26e4f25a4272
Summary:
Given that index value is a BlockHandle, which is basically an <offset, size> pair we can apply delta encoding on the values. The first value at each index restart interval encoded the full BlockHandle but the rest encode only the size. Refer to IndexBlockIter::DecodeCurrentValue for the detail of the encoding. This reduces the index size which helps using the block cache more efficiently. The feature is enabled with using format_version 4.
The feature comes with a bit of cpu overhead which should be paid back by the higher cache hits due to smaller index block size.
Results with sysbench read-only using 4k blocks and using 16 index restart interval:
Format 2:
19585 rocksdb read-only range=100
Format 3:
19569 rocksdb read-only range=100
Format 4:
19352 rocksdb read-only range=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3983
Differential Revision: D8361343
Pulled By: maysamyabandeh
fbshipit-source-id: f882ee082322acac32b0072e2bdbb0b5f854e651
Summary:
Lint is not happy with some new code recently committed. Format them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4161
Differential Revision: D8940582
Pulled By: siying
fbshipit-source-id: c9b43b1ef8c88b5e923911058b44eb77234b36b7
Summary:
The properties meta-block should come at the end since we always need to
read it when opening a file, unlike index/filter/other meta-blocks, which
are sometimes read depending on the user's configuration. This ordering
will allow us to (in a future PR) do a small readahead on the end of the file
to read properties and meta-index blocks with one I/O.
The bulk of this PR is a refactoring of the `BlockBasedTableBuilder::Finish`
function. It was previously too large with inconsistent error handling, which
made it difficult to change. So I broke it up into one function per meta-block
write, and tried to make error handling consistent within those functions.
Then reordering the metablocks was trivial -- just reorder the calls to these
helper functions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4158
Differential Revision: D8921705
Pulled By: ajkr
fbshipit-source-id: 96c9cc3182eb1adf11af46adab79dbeba7b12fcc
Summary:
Currently the block cache is charged only by the size of the raw data block and excludes the overhead of the c++ objects that contain the raw data block. The patch improves the accuracy of the charge by including the c++ object overhead into it.
Closes https://github.com/facebook/rocksdb/pull/4073
Differential Revision: D8686552
Pulled By: maysamyabandeh
fbshipit-source-id: 8472f7fc163c0644533bc6942e20cdd5725f520f
Summary:
Add a new table property, rocksdb.num.range-deletions, which tracks the
number of range deletions in a block-based table. Range deletions are no
longer counted in rocksdb.num.entries; as discovered in PR #3778, there
are various code paths that implicitly assume that rocksdb.num.entries
counts only true keys, not range deletions.
/cc ajkr nvanbenschoten
Closes https://github.com/facebook/rocksdb/pull/4016
Differential Revision: D8527575
Pulled By: ajkr
fbshipit-source-id: 92e7edbe78fda53756a558013c9fb496e7764fd7
Summary:
PR https://github.com/facebook/rocksdb/pull/3838 made some changes that triggers lint warnings.
Run `make format` to fix formatting as suggested by siying .
Also piggyback two changes:
1) fix singleton destruction order for windows and posix env
2) fix two clang warnings
Closes https://github.com/facebook/rocksdb/pull/3954
Differential Revision: D8272041
Pulled By: miasantreble
fbshipit-source-id: 7c4fd12bd17aac13534520de0c733328aa3c6c9f
Summary:
Windows does not have LD_PRELOAD mechanism to override all memory allocation functions and ZSTD makes use of C-tuntime calloc. During flushes and compactions default system allocator fragments and the system slows down considerably.
For builds with jemalloc we employ an advanced ZSTD context creation API that re-directs memory allocation to jemalloc. To reduce the cost of context creation on each block we cache ZSTD context within the block based table builder while a new SST file is being built, this will help all platform builds including those w/o jemalloc. This avoids system allocator fragmentation and improves the performance.
The change does not address random reads and currently on Windows reads with ZSTD regress as compared with SNAPPY compression.
Closes https://github.com/facebook/rocksdb/pull/3838
Differential Revision: D8229794
Pulled By: miasantreble
fbshipit-source-id: 719b622ab7bf4109819bc44f45ec66f0dd3ee80d
Summary:
Index blocks have the same format as data blocks. The keys therefore similarly to the keys in the data blocks are internal keys, which means that in addition to the user key it also has 8 bytes that encodes sequence number and value type. This extra 8 bytes however is not necessary in index blocks since the index keys act as an separator between two data blocks. The only exception is when the last key of a block and the first key of the next block share the same user key, in which the sequence number is required to act as a separator.
The patch excludes the sequence from index keys only if the above special case does not happen for any of the index keys. It then records that in the property block. The reader looks at the property block to see if it should expect sequence numbers in the keys of the index block.s
Closes https://github.com/facebook/rocksdb/pull/3894
Differential Revision: D8118775
Pulled By: maysamyabandeh
fbshipit-source-id: 915479f028b5799ca91671d67455ecdefbd873bd
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
`RangeDelAggregator` holds the pointers returned by `BlockIter::key()` and `BlockIter::value()` so requires the data to which they point is pinned. `BlockIter::key()` points into block memory and is guaranteed to be pinned if and only if prefix encoding is disabled (or, equivalently, restart interval is set to one). I think `BlockIter::value()` is always pinned. Added an assert for these and removed the wrong TODO about increasing restart interval, which would enable key prefix encoding and break the assertion.
Closes https://github.com/facebook/rocksdb/pull/3875
Differential Revision: D8063667
Pulled By: ajkr
fbshipit-source-id: 60b5ebcc0cdd610dd6aad9e74a23378793672c41
Summary:
Provide a block_align option in BlockBasedTableOptions to allow
alignment of SST file data blocks. This will avoid higher
IOPS/throughput load due to < 4KB data blocks spanning 2 4KB pages.
When this option is set to true, the block alignment is set to lower of
block size and 4KB.
Closes https://github.com/facebook/rocksdb/pull/3502
Differential Revision: D7400897
Pulled By: anand1976
fbshipit-source-id: 04cc3bd144e88e3431a4f97604e63ad7a0f06d44
Summary:
- removed a few unneeded variables
- fused some variable declarations and their assignments
- fixed right-trimming code in string_util.cc to not underflow
- simplifed an assertion
- move non-nullptr check assertion before dereferencing of that pointer
- pass an std::string function parameter by const reference instead of by value (avoiding potential copy)
Closes https://github.com/facebook/rocksdb/pull/3507
Differential Revision: D7004679
Pulled By: sagar0
fbshipit-source-id: 52944952d9b56dfcac3bea3cd7878e315bb563c4
Peter Dillinger