Summary:
We have recently made some stress test improvements that rely on decoding the "value base" from the values stored in the database. This logic does not currently support the case when some KVs are written by a non-batched ops run and some by a batched ops run. The patch temporarily disables mixing these two.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10821
Reviewed By: riversand963
Differential Revision: D40367326
Pulled By: ltamasi
fbshipit-source-id: 66f2e0cbc097ab6b1f9e4b39b833bd466f1aaab5
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10818
Test Plan: Tested using some simple blackbox crash test runs in the various modes (non-batched, batched, CF consistency).
Reviewed By: riversand963
Differential Revision: D40349527
Pulled By: ltamasi
fbshipit-source-id: 2918bc26adbbeac314beaa958aafe770b01e5cc6
Summary:
This reverts https://github.com/facebook/rocksdb/issues/10792 and uses a different strategy to stabilize the test: remove the unnecessary randomness by providing a constant seed for shuffling keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10816
Test Plan: `gtest-parallel ./db_bloom_filter_test -r1000 --gtest_filter=*ForHits*`
Reviewed By: jay-zhuang
Differential Revision: D40347957
Pulled By: pdillinger
fbshipit-source-id: a270e157485cbd94ed03b80cdd21b954ebd57d57
Summary:
This has several small improvements.
benchmark.sh
* add BYTES_PER_SYNC as an env variable
* use --prepopulate_block_cache when O_DIRECT is used
* use --undefok to list options that don't work for all 7.x releases
* print "failure" in report.tsv when a benchmark fails
* parse the slightly different throughput line used by db_bench for multireadrandom
* remove the trailing comma for BlobDB size before printing it in report.tsv
* use the last line of the output from /bin/time as there can be more than one line when db_bench has a non-zero exit
* fix more bash lint warnings
* add ",stats" to the --benchmark=... lines to get stats at the end of each benchmark
benchmark_compare.sh
* run revrange immediately after fillseq to let compaction debt get removed
* add --multiread_batched when --benchmarks=multireadrandom is used
* use --benchmarks=overwriteandwait when supported to get a more accurate measure of write-amp
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10803
Test Plan: Run it for leveled, universal and BlobDB
Reviewed By: jay-zhuang
Differential Revision: D40278315
Pulled By: mdcallag
fbshipit-source-id: 793134ddc7d48d05a07436cd8942c375a23983a7
Summary:
There are two places in the stress test code where we compute the CRC
for a range of KVs for the purposes of checking consistency, namely in the
CF consistency test (to make sure CFs contain the same data), and when
performing `CompactRange` (to make sure the pre- and post-compaction
states are equivalent). The patch extends the logic so that wide columns
are also considered in both cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10788
Test Plan: Tested using some simple blackbox crash test runs.
Reviewed By: riversand963
Differential Revision: D40191134
Pulled By: ltamasi
fbshipit-source-id: 542c21cac9077c6d225780deb210319bb5eee955
Summary:
Lock the penultimate level for the whole compaction inputs range, so any
key in that compaction is safe to move up from the last level to
penultimate level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10782
Reviewed By: siying
Differential Revision: D40231540
Pulled By: siying
fbshipit-source-id: ca115cc8b4018b35d797329fa85a19b06cc8c13e
Summary:
This change is motivated by ensuring that `ldb update_manifest` or `UpdateManifestForFilesState` can run without expecting files to open when the old temperature is provided (in case the FileSystem strictly interprets non-kUnknown), but ended up fixing a problem in `OfflineManifestWriter` (used by `ldb unsafe_remove_sst_file`) where it would open some SST files during recovery and expect them to match the prior manifest state, even if not required by the intended new state.
Also update BackupEngine to retry with Temperature kUnknown when reading file with potentially "wrong" temperature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10796
Test Plan: tests added/updated, that fail before the change(s) and now pass
Reviewed By: jay-zhuang
Differential Revision: D40232645
Pulled By: jay-zhuang
fbshipit-source-id: b5aa2688aecfe0c320b80a7da689b315414c20be
Summary:
Provide support for async_io if ReadOptions.tailing is set true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10781
Test Plan:
- Update unit tests
- Ran db_bench: ./db_bench --benchmarks="readrandom" --use_existing_db --use_tailing_iterator=1 --async_io=1
Reviewed By: anand1976
Differential Revision: D40128882
Pulled By: anand1976
fbshipit-source-id: 55e17855536871a5c47e2de92d238ae005c32d01
Summary:
When the `iter_start_ts` read option is set, iterator exposes internal keys. This also includes tombstones, which by definition do not have a value (or columns). The patch makes sure we skip the wide-column consistency check in this case.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10799
Test Plan: Tested using a simple blackbox crash test with timestamps enabled.
Reviewed By: jay-zhuang, riversand963
Differential Revision: D40235628
fbshipit-source-id: 49519fb55d8fe2bb9249ced809f7a81bff2b9df2
Summary:
The test may fail because the L5 files may only cover small portion of the whole key range.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10792
Test Plan:
```
gtest-parallel ./db_bloom_filter_test --gtest_filter=DBBloomFilterTest.OptimizeFiltersForHits -r 1000 -w 100
```
Reviewed By: siying
Differential Revision: D40217600
Pulled By: siying
fbshipit-source-id: 18db549184bccf5e513eaa7e31ab17385b71ef71
Summary:
Add option `preserve_internal_time_seconds` to preserve the internal
time information.
It's mostly for the migration of the existing data to tiered storage (
`preclude_last_level_data_seconds`). When the tiering feature is just
enabled, the existing data won't have the time information to decide if
it's hot or cold. Enabling this feature will start collect and preserve
the time information for the new data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10747
Reviewed By: siying
Differential Revision: D39910141
Pulled By: siying
fbshipit-source-id: 25c21638e37b1a7c44006f636b7d714fe7242138
Summary:
When checking if a range [start, end) overlaps with a compaction whose range is [start1, end1), always exclude timestamp from start, end, start1 and end1, otherwise some versions of one user key may be compacted to bottommost layer while others remain in the original level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10787
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D40187672
Pulled By: ltamasi
fbshipit-source-id: 81226267fd3e33ffa79665c62abadf2ebec45496
Summary:
The patch adds checks to the
`{NonBatchedOps,BatchedOps,CfConsistency}StressTest::TestPrefixScan` methods
to make sure the wide columns exposed by the iterators are as expected (based on
the value base encoded into the iterator value). It also makes some code hygiene
improvements in these methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10786
Test Plan:
Ran some simple blackbox tests in the various modes (non-batched, batched,
CF consistency).
Reviewed By: riversand963
Differential Revision: D40163623
Pulled By: riversand963
fbshipit-source-id: 72f4c3b51063e48c15f974c4ec64d751d3ed0a83
Summary:
To make it consistent with the compaction picker which uses the `sstableKeyCompare()` to pick the overlap files. For example, without this change, it may cut L1 files like:
```
L1: [2-21] [22-30]
L2: [1-10] [21-30]
```
Because "21" on L1 is smaller than "21" on L2. But for compaction, these 2 files are overlapped.
`sstableKeyCompare()` also take range delete into consideration which may cut file for the same key.
It also makes the `max_compaction_bytes` calculation more accurate for cases like above, the overlapped bytes was under estimated. Also make sure the 2 keys won't be splitted to 2 files because of reaching `max_compaction_bytes`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10763
Reviewed By: cbi42
Differential Revision: D39971904
Pulled By: cbi42
fbshipit-source-id: bcc309e9c3dc61a8f50667a6f633e6132c0154a8
Summary:
As the first step of covering the wide-column functionality of iterators
in our stress tests, the patch adds verification logic to
`NonBatchedOpsStressTest::VerifyDb` that checks whether the
iterator's value and columns are in sync. Note: I plan to update the other
types of stress tests and add similar verification for prefix scans etc.
in separate PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10783
Test Plan: Ran some simple blackbox crash tests.
Reviewed By: riversand963
Differential Revision: D40152370
Pulled By: riversand963
fbshipit-source-id: 8f9d17d7af5da58ccf1bd2057cab53cc9645ac35
Summary:
We have seen some rare crash test failures in HyperClockCache, and the source could certainly be a bug fixed in this change, in ClockHandleTable::ConstApplyToEntriesRange. It wasn't properly accounting for the fact that incrementing the acquire counter could be ineffective, due to parallel updates. (When incrementing the acquire counter is ineffective, it is incorrect to then decrement it.)
This change includes some other minor clean-up in HyperClockCache, and adds stats_dump_period_sec with a much lower period to the crash test. This should be the primary caller of ApplyToEntries, in collecting cache entry stats.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10768
Test Plan: haven't been able to reproduce the failure, but should be in a better state (bug fix and improved crash test)
Reviewed By: anand1976
Differential Revision: D40034747
Pulled By: anand1976
fbshipit-source-id: a06fcefe146e17ee35001984445cedcf3b63eb68
Summary:
With current implementation, within the same RocksDB instance, all column families with non-empty memtables will be scheduled for flush if RocksDB determines that any column family needs to be flushed, e.g. memtable full, write buffer manager, etc., if atomic flush is enabled. Not doing so can lead to data loss and inconsistency when WAL is disabled, which is a common setting when atomic flush is enabled. Therefore, setting a per-column-family knob, min_write_buffer_number_to_merge to a value greater than 1 is not compatible with atomic flush, and should be sanitized during column family creation and db open.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10773
Test Plan:
Reproduce: D39993203 has detailed steps.
Run the test with and without the fix.
Reviewed By: cbi42
Differential Revision: D40077955
Pulled By: cbi42
fbshipit-source-id: 451a9179eb531ac42eaccf40b451b9dec4085240
Summary:
fix for https://github.com/facebook/rocksdb/issues/10752 where RocksDB could be in an infinite compaction loop (with compaction reason kBottommostFiles) if allow_ingest_behind is enabled and the bottommost level is unfilled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10767
Test Plan: Added a unit test to reproduce the compaction loop.
Reviewed By: ajkr
Differential Revision: D40031861
Pulled By: ajkr
fbshipit-source-id: 71c4b02931fbe507a847632905404c9b8fa8c96b
Summary:
Fix a bug in Iterator::Refresh() where the local SV it obtained could be obsolete upon return, and should be cleaned up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10770
Test Plan: added a unit test to reproduce the issue.
Reviewed By: ajkr
Differential Revision: D40063809
Pulled By: ajkr
fbshipit-source-id: 619e728eb0f1ac9540b4d0ad38e43acc37a514b2
Summary:
When `FlushOptions::wait` is set to false, manual flush should not stall forever.
If the database has already stopped writes, then the thread calling `DB::Flush()` with
`FlushOptions::wait=false` should not enter the `DBImpl::write_thread_`.
To prevent this, we should do a check at the beginning and return `TryAgain()`
Resolves: https://github.com/facebook/rocksdb/issues/9892
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10001
Reviewed By: siying
Differential Revision: D36422303
Pulled By: siying
fbshipit-source-id: 723bd3065e8edc4f17c82449d0d6b95a2381ac0a
Summary:
For RoundRobin compaction, the data should be mostly sorted per level and within level. Use normal compaction picker for RR until all expired data is compacted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10725
Reviewed By: ajkr
Differential Revision: D39771069
Pulled By: jay-zhuang
fbshipit-source-id: 7ccf88d7c093fad5673bda73a7b08cc4757780cd
Summary:
This is intended as a step toward possibly separating secondary cache integration from the
Cache implementation as much as possible, to (hopefully) minimize code duplication in
adding secondary cache support to HyperClockCache.
* Major clarifications to API docs of secondary cache compatible parts of Cache. For example, previously the docs seemed to suggest that Wait() was not needed if IsReady()==true. And it wasn't clear what operations were actually supported on pending handles.
* Add some assertions related to these requirements, such as that we don't Release() before Wait() (which would leak a secondary cache handle).
* Fix a leaky abstraction with dummy handles, which are supposed to be internal to the Cache. Previously, these just used value=nullptr to indicate dummy handle, which meant that they could be confused with legitimate value=nullptr cases like cache reservations. Also fixed blob_source_test which was relying on this leaky abstraction.
* Drop "incomplete" terminology, which was another name for "pending".
* Split handle flags into "mutable" ones requiring mutex and "immutable" ones which do not. Because of single-threaded access to pending handles, the "Is Pending" flag can be in the "immutable" set. This allows removal of a TSAN work-around and removing a mutex acquire-release in IsReady().
* Remove some unnecessary handling of charges on handles of failed lookups. Keeping total_charge=0 means no special handling needed. (Removed one unnecessary mutex acquire/release.)
* Simplify handling of dummy handle in Lookup(). There is no need to explicitly Ref & Release w/Erase if we generally overwrite the dummy anyway. (Removed one mutex acquire/release, a call to Release().)
Intended follow-up:
* Clarify APIs in secondary_cache.h
* Doesn't SecondaryCacheResultHandle transfer ownership of the Value() on success (implementations should not release the value in destructor)?
* Does Wait() need to be called if IsReady() == true? (This would be different from Cache.)
* Do Value() and Size() have undefined behavior if IsReady() == false?
* Why have a custom API for what is essentially a std::future<std::pair<void*, size_t>>?
* Improve unit testing of standalone handle case
* Apparent null `e` bug in `free_standalone_handle` case
* Clean up secondary cache testing in lru_cache_test
* Why does TestSecondaryCacheResultHandle hold on to a Cache::Handle?
* Why does TestSecondaryCacheResultHandle::Wait() do nothing? Shouldn't it establish the post-condition IsReady() == true?
* (Assuming that is sorted out...) Shouldn't TestSecondaryCache::WaitAll simply wait on each handle in order (no casting required)? How about making that the default implementation?
* Why does TestSecondaryCacheResultHandle::Size() check Value() first? If the API is intended to be returning 0 before IsReady(), then that is weird but should at least be documented. Otherwise, if it's intended to be undefined behavior, we should assert IsReady().
* Consider replacing "standalone" and "dummy" entries with a single kind of "weak" entry that deletes its value when it reaches zero refs. Suppose you are using compressed secondary cache and have two iterators at similar places. It will probably common for one iterator to have standalone results pinned (out of cache) when the second iterator needs those same blocks and has to re-load them from secondary cache and duplicate the memory. Combining the dummy and the standalone should fix this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10730
Test Plan:
existing tests (minor update), and crash test with sanitizers and secondary cache
Performance test for any regressions in LRUCache (primary only):
Create DB with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16
```
Test before & after (run at same time) with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X100] -readonly -num=30000000 -bloom_bits=16 -cache_index_and_filter_blocks=1 -cache_size=233000000 -duration 30 -threads=16
```
Before: readrandom [AVG 100 runs] : 22234 (± 63) ops/sec; 1.6 (± 0.0) MB/sec
After: readrandom [AVG 100 runs] : 22197 (± 64) ops/sec; 1.6 (± 0.0) MB/sec
That's within 0.2%, which is not significant by the confidence intervals.
Reviewed By: anand1976
Differential Revision: D39826010
Pulled By: anand1976
fbshipit-source-id: 3202b4a91f673231c97648ae070e502ae16b0f44
Summary:
`SstFileWriter` currently does not support the `PutEntity` API, so in `TestIngestExternalFile` all key-values are written using regular `Put`s. This violates the assumption that whether or not a key corresponds to a plain old key-value or a wide-column entity can be determined by solely looking at the "value base" used when generating the value. The patch fixes this issue by disabling ingestion when `PutEntity` is enabled in the stress tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10769
Test Plan: Ran a simple blackbox stress test.
Reviewed By: akankshamahajan15
Differential Revision: D40042132
Pulled By: ltamasi
fbshipit-source-id: 93e75ff55545b7b69fa4ddef1d96093c961158a0
Summary:
added calls to `Iterator::Refresh()` in `NonBatchedOpsStressTest::TestIterateAgainstExpected()`. The testing key range is locked in `TestIterateAgainstExpected` so I do not expect this change to provide thorough stress test to `Iterator::Refresh()`. However, it can still be helpful for catching bugs like https://github.com/facebook/rocksdb/issues/10739. Will add calls to refresh in `TestIterate` once we support iterator refresh with snapshots.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10766
Test Plan: `python3 tools/db_crashtest.py whitebox --simple --verify_iterator_with_expected_state_one_in=2`
Reviewed By: ajkr
Differential Revision: D40008320
Pulled By: ajkr
fbshipit-source-id: cec93b07f915ef6476d41c1fee9b23c115188085
Summary:
Add new property "do_not_recurse" in IOOptions for underlying file system to skip iteration of directories during DB::Open if there are no sub directories and list only files.
By default this property is set to false. This property is set true currently in the code where RocksDB is sure only files are needed during DB::Open.
Provided support in PosixFileSystem to use "do_not_recurse".
TestPlan:
- Existing tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10668
Reviewed By: anand1976
Differential Revision: D39471683
Pulled By: akankshamahajan15
fbshipit-source-id: 90e32f0b86d5346d53bc2714d3a0e7002590527f
Summary:
Add user-defined timestamp support for range deletion. The new API is `DeleteRange(opt, cf, begin_key, end_key, ts)`. Most of the change is to update the comparator to compare without timestamp. Other than that, major changes are
- internal range tombstone data structures (`FragmentedRangeTombstoneList`, `RangeTombstone`, etc.) to store timestamps.
- Garbage collection of range tombstones and range tombstone covered keys during compaction.
- Get()/MultiGet() to return the timestamp of a range tombstone when needed.
- Get/Iterator with range tombstones bounded by readoptions.timestamp.
- timestamp crash test now issues DeleteRange by default.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10661
Test Plan:
- Added unit test: `make check`
- Stress test: `python3 tools/db_crashtest.py --enable_ts whitebox --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4`
- Ran `db_bench` to measure regression when timestamp is not enabled. The tests are for write (with some range deletion) and iterate with DB fitting in memory: `./db_bench--benchmarks=fillrandom,seekrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=500000 --seek_nexts=10 --disable_auto_compactions -disable_wal=true --max_num_range_tombstones=1000`. Did not see consistent regression in no timestamp case.
| micros/op | fillrandom | seekrandom |
| --- | --- | --- |
|main| 2.58 |10.96|
|PR 10661| 2.68 |10.63|
Reviewed By: riversand963
Differential Revision: D39441192
Pulled By: cbi42
fbshipit-source-id: f05aca3c41605caf110daf0ff405919f300ddec2
Summary:
**Context/Summary:**
Introduce `manual_wal_flush_one_in` as titled.
- When `manual_wal_flush_one_in > 0`, we also need tracing to correctly verify recovery because WAL data can be lost in this case when `FlushWAL()` is not explicitly called by users of RocksDB (in our case, db stress) and the recovery from such potential WAL data loss is a prefix recovery that requires tracing to verify. As another consequence, we need to disable features can't run under unsync data loss with `manual_wal_flush_one_in`
Incompatibilities fixed along the way:
```
db_stress: db/db_impl/db_impl_open.cc:2063: static rocksdb::Status rocksdb::DBImpl::Open(const rocksdb::DBOptions&, const string&, const std::vector<rocksdb::ColumnFamilyDescriptor>&, std::vector<rocksdb::ColumnFamilyHandle*>*, rocksdb::DB**, bool, bool): Assertion `impl->TEST_WALBufferIsEmpty()' failed.
```
- It turns out that `Writer::AddCompressionTypeRecord` before this assertion `EmitPhysicalRecord(kSetCompressionType, encode.data(), encode.size());` but do not trigger flush if `manual_wal_flush` is set . This leads to `impl->TEST_WALBufferIsEmpty()' is false.
- As suggested, assertion is removed and violation case is handled by `FlushWAL(sync=true)` along with refactoring `TEST_WALBufferIsEmpty()` to be `WALBufferIsEmpty()` since it is used in prod code now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10698
Test Plan:
- Locally running `python3 tools/db_crashtest.py blackbox --manual_wal_flush_one_in=1 --manual_wal_flush=1 --sync_wal_one_in=100 --atomic_flush=1 --flush_one_in=100 --column_families=3`
- Joined https://github.com/facebook/rocksdb/pull/10624 in auto CI testings with all RocksDB stress/crash test jobs
Reviewed By: ajkr
Differential Revision: D39593752
Pulled By: ajkr
fbshipit-source-id: 3a2135bb792c52d2ffa60257d4fbc557fb04d2ce
Summary:
If the `-expected_values_dir` argument to db_stress is empty, then verification against expected state is effectively disabled. But `RunStressTest` still calls `TrackExpectedState`, which returns `NotSupported` causing a the crash test to fail with a false alarm. Fix it by only calling `TrackExpectedState` if necessary.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10764
Reviewed By: ajkr
Differential Revision: D39980129
Pulled By: anand1976
fbshipit-source-id: d02651746fe3a297877a4b2b2fbcb7274860f49c
Summary:
The patch adds the `PutEntity` API to the non-batched, batched, and
CF consistency stress tests. Namely, when the new `db_stress` command
line parameter `use_put_entity_one_in` is greater than zero, one in
N writes on average is performed using `PutEntity` rather than `Put`.
The wide-column entity written has the generated value in its default
column; in addition, it contains up to three additional columns where
the original generated value is divided up between the column name and the
column value (with the column name containing the first k characters of
the generated value, and the column value containing the rest). Whether
`PutEntity` is used (and if so, how many columns the entity has) is completely
determined by the "value base" used to generate the value (that is, there is
no randomness involved). Assuming the same `use_put_entity_one_in` setting
is used across `db_stress` invocations, this enables us to reconstruct and
validate the entity during subsequent `db_stress` runs.
Note that `PutEntity` is currently incompatible with `Merge`, transactions, and
user-defined timestamps; these combinations are currently disabled/disallowed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10760
Test Plan: Ran some batched, non-batched, and CF consistency stress tests using the script.
Reviewed By: riversand963
Differential Revision: D39939032
Pulled By: ltamasi
fbshipit-source-id: eafdf124e95993fb7d73158e3b006d11819f7fa9
Summary:
currently, there are places in compaction_picker where we add up `compensated_file_size` of files being compacted and limit the sum to be under `max_compaction_bytes`. `compensated_file_size` contains booster for point tombstones and should be used only for determining file's compaction priority. This PR replaces `compensated_file_size` with actual file size in such places.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10728
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D39789427
Pulled By: cbi42
fbshipit-source-id: 1f89fb6c0159c53bf01d8dc783f465959f442c81
Summary:
Try to align the compaction output file boundaries to the next level ones
(grandparent level), to reduce the level compaction write-amplification.
In level compaction, there are "wasted" data at the beginning and end of the
output level files. Align the file boundary can avoid such "wasted" compaction.
With this PR, it tries to align the non-bottommost level file boundaries to its
next level ones. It may cut file when the file size is large enough (at least
50% of target_file_size) and not too large (2x target_file_size).
db_bench shows about 12.56% compaction reduction:
```
TEST_TMPDIR=/data/dbbench2 ./db_bench --benchmarks=fillrandom,readrandom -max_background_jobs=12 -num=400000000 -target_file_size_base=33554432
# baseline:
Flush(GB): cumulative 25.882, interval 7.216
Cumulative compaction: 285.90 GB write, 162.36 MB/s write, 269.68 GB read, 153.15 MB/s read, 2926.7 seconds
# with this change:
Flush(GB): cumulative 25.882, interval 7.753
Cumulative compaction: 249.97 GB write, 141.96 MB/s write, 233.74 GB read, 132.74 MB/s read, 2534.9 seconds
```
The compaction simulator shows a similar result (14% with 100G random data).
As a side effect, with this PR, the SST file size can exceed the
target_file_size, but is capped at 2x target_file_size. And there will be
smaller files. Here are file size statistics when loading 100GB with the target
file size 32MB:
```
baseline this_PR
count 1.656000e+03 1.705000e+03
mean 3.116062e+07 3.028076e+07
std 7.145242e+06 8.046139e+06
```
The feature is enabled by default, to revert to the old behavior disable it
with `AdvancedColumnFamilyOptions.level_compaction_dynamic_file_size = false`
Also includes https://github.com/facebook/rocksdb/issues/1963 to cut file before skippable grandparent file. Which is for
use case like user adding 2 or more non-overlapping data range at the same
time, it can reduce the overlapping of 2 datasets in the lower levels.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10655
Reviewed By: cbi42
Differential Revision: D39552321
Pulled By: jay-zhuang
fbshipit-source-id: 640d15f159ab0cd973f2426cfc3af266fc8bdde2
Summary:
Bringing in multiple libraries failed as they were not considered as separate arguments. In this commit we make sure to add *all* the libraries to THIRD_PARTYLIBS. Additionally we add more informative status messages for when the plugins get added.
Signed-off-by: Joel Granados <joel.granados@gmail.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10727
Reviewed By: riversand963
Differential Revision: D39778566
Pulled By: ajkr
fbshipit-source-id: 34306b26ab4c726d17353ddd765f368967a1b59f
Summary:
If all the keys in range [key_base, shared->GetMaxKey()) are non-overwritable `TestIngestExternalFile()` would attempt to ingest a file with zero keys, leading to the following error: "Cannot create sst file with no entries". This PR changes `TestIngestExternalFile()` to return early in that case instead of going through with the ingestion attempt.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10754
Reviewed By: hx235
Differential Revision: D39909195
Pulled By: ajkr
fbshipit-source-id: e06e6b9cc24826fbd450e5130885e6f07164badd
Summary:
Older versions of gflags do not have `DEFINE_uint32` and `DECLARE_uint32`. In util/gflag_compat.h, we already add a hack for `DEFINE_uint32`. This PR adds a hack for `DECLARE_uint32`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10729
Test Plan:
ROCKSDB_NO_FBCODE=1 make V=1 -j16 db_stress
make check
Resolves https://github.com/facebook/rocksdb/issues/10704
Reviewed By: pdillinger
Differential Revision: D39789183
Pulled By: riversand963
fbshipit-source-id: a58747e0163dcf55dd762733aa5c40d8f0ae70a6
Summary:
An add-on to https://github.com/facebook/rocksdb/pull/6818 to complete adding single-level universal compaction to stress/crash testing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10732
Test Plan:
- Locally run for 10 min `python3 ./tools/db_crashtest.py whitebox --simple --compaction_style=1 --num_levels=1 -max_key=1000000 -value_size_mult=33 -write_buffer_size=524288 -target_file_size_base=524288 -max_bytes_for_level_base=2097152 --duration=120 --interval=10 --ops_per_thread=1000 --random_kill_odd=887`
- Check LOG to confirm single-level universal compaction is called
- Manual testing and log checking to ensure destroy_db_initially=1 is correctly set across runs with different compaction styles (i.e, in the second half of whitebox testing).
- [ongoing]CI jobs stress test
Reviewed By: ajkr
Differential Revision: D39797612
Pulled By: ajkr
fbshipit-source-id: 16f5c40c3464c57360c06c8305f92118e426149c
Summary:
Currently, this original behavior should not lead to incorrect result, but will violate the contract of CompareWithTimestamp() that when a_has_ts or b_has_ts is false, the slice does not include timestamp.
Resolves https://github.com/facebook/rocksdb/issues/10709
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10742
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D39834096
Pulled By: riversand963
fbshipit-source-id: c597600f5a7820734f07d0926cdc224cea5eabe1
Levi Tamasi