158 Commits (749b849a34c4b0c4aa359ef5c4fc7cde64854ef0)

Author	SHA1	Message	Date
Peter Dillinger	5724348689	Revamp, optimize new experimental clock cache (#10626) ... Summary: * Consolidates most metadata into a single word per slot so that more can be accomplished with a single atomic update. In the common case, Lookup was previously about 4 atomic updates, now just 1 atomic update. Common case Release was previously 1 atomic read + 1 atomic update, now just 1 atomic update. * Eliminate spins / waits / yields, which likely threaten some "lock free" benefits. Compare-exchange loops are only used in explicit Erase, and strict_capacity_limit=true Insert. Eviction uses opportunistic compare- exchange. * Relaxes some aggressiveness and guarantees. For example, * Duplicate Inserts will sometimes go undetected and the shadow duplicate will age out with eviction. * In many cases, the older Inserted value for a given cache key will be kept (i.e. Insert does not support overwrite). * Entries explicitly erased (rather than evicted) might not be freed immediately in some rare cases. * With strict_capacity_limit=false, capacity limit is not tracked/enforced as precisely as LRUCache, but is self-correcting and should only deviate by a very small number of extra or fewer entries. * Use smaller "computed default" number of cache shards in many cases, because benefits to larger usage tracking / eviction pools outweigh the small cost of more lock-free atomic contention. The improvement in CPU and I/O is dramatic in some limit-memory cases. * Even without the sharding change, the eviction algorithm is likely more effective than LRU overall because it's more stateful, even though the "hot path" state tracking for it is essentially free with ref counting. It is like a generalized CLOCK with aging (see code comments). I don't have performance numbers showing a specific improvement, but in theory, for a Poisson access pattern to each block, keeping some state allows better estimation of time to next access (Poisson interval) than strict LRU. The bounded randomness in CLOCK can also reduce "cliff" effect for repeated range scans approaching and exceeding cache size. ## Hot path algorithm comparison Rough descriptions, focusing on number and kind of atomic operations: * Old `Lookup()` (2-5 atomic updates per probe): ``` Loop: Increment internal ref count at slot If possible hit: Check flags atomic (and non-atomic fields) If cache hit: Three distinct updates to 'flags' atomic Increment refs for internal-to-external Return Decrement internal ref count while atomic read 'displacements' > 0 ``` * New `Lookup()` (1-2 atomic updates per probe): ``` Loop: Increment acquire counter in meta word (optimistic) If visible entry (already read meta word): If match (read non-atomic fields): Return Else: Decrement acquire counter in meta word Else if invisible entry (rare, already read meta word): Decrement acquire counter in meta word while atomic read 'displacements' > 0 ``` * Old `Release()` (1 atomic update, conditional on atomic read, rarely more): ``` Read atomic ref count If last reference and invisible (rare): Use CAS etc. to remove Return Else: Decrement ref count ``` * New `Release()` (1 unconditional atomic update, rarely more): ``` Increment release counter in meta word If last reference and invisible (rare): Use CAS etc. to remove Return ``` ## Performance test setup Build DB with ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16 ``` Test with ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom -readonly -num=30000000 -bloom_bits=16 -cache_index_and_filter_blocks=1 -cache_size=${CACHE_MB}000000 -duration 60 -threads=$THREADS -statistics ``` Numbers on a single socket Skylake Xeon system with 48 hardware threads, DEBUG_LEVEL=0 PORTABLE=0. Very similar story on a dual socket system with 80 hardware threads. Using (every 2nd) Fibonacci MB cache sizes to sample the territory between powers of two. Configurations: base: LRUCache before this change, but with db_bench change to default cache_numshardbits=-1 (instead of fixed at 6) folly: LRUCache before this change, with folly enabled (distributed mutex) but on an old compiler (sorry) gt_clock: experimental ClockCache before this change new_clock: experimental ClockCache with this change ## Performance test results First test "hot path" read performance, with block cache large enough for whole DB: 4181MB 1thread base -> kops/s: 47.761 4181MB 1thread folly -> kops/s: 45.877 4181MB 1thread gt_clock -> kops/s: 51.092 4181MB 1thread new_clock -> kops/s: 53.944 4181MB 16thread base -> kops/s: 284.567 4181MB 16thread folly -> kops/s: 249.015 4181MB 16thread gt_clock -> kops/s: 743.762 4181MB 16thread new_clock -> kops/s: 861.821 4181MB 24thread base -> kops/s: 303.415 4181MB 24thread folly -> kops/s: 266.548 4181MB 24thread gt_clock -> kops/s: 975.706 4181MB 24thread new_clock -> kops/s: 1205.64 (~= 24 * 53.944) 4181MB 32thread base -> kops/s: 311.251 4181MB 32thread folly -> kops/s: 274.952 4181MB 32thread gt_clock -> kops/s: 1045.98 4181MB 32thread new_clock -> kops/s: 1370.38 4181MB 48thread base -> kops/s: 310.504 4181MB 48thread folly -> kops/s: 268.322 4181MB 48thread gt_clock -> kops/s: 1195.65 4181MB 48thread new_clock -> kops/s: 1604.85 (~= 24 * 1.25 * 53.944) 4181MB 64thread base -> kops/s: 307.839 4181MB 64thread folly -> kops/s: 272.172 4181MB 64thread gt_clock -> kops/s: 1204.47 4181MB 64thread new_clock -> kops/s: 1615.37 4181MB 128thread base -> kops/s: 310.934 4181MB 128thread folly -> kops/s: 267.468 4181MB 128thread gt_clock -> kops/s: 1188.75 4181MB 128thread new_clock -> kops/s: 1595.46 Whether we have just one thread on a quiet system or an overload of threads, the new version wins every time in thousand-ops per second, sometimes dramatically so. Mutex-based implementation quickly becomes contention-limited. New clock cache shows essentially perfect scaling up to number of physical cores (24), and then each hyperthreaded core adding about 1/4 the throughput of an additional physical core (see 48 thread case). Block cache miss rates (omitted above) are negligible across the board. With partitioned instead of full filters, the maximum speed-up vs. base is more like 2.5x rather than 5x. Now test a large block cache with low miss ratio, but some eviction is required: 1597MB 1thread base -> kops/s: 46.603 io_bytes/op: 1584.63 miss_ratio: 0.0201066 max_rss_mb: 1589.23 1597MB 1thread folly -> kops/s: 45.079 io_bytes/op: 1530.03 miss_ratio: 0.019872 max_rss_mb: 1550.43 1597MB 1thread gt_clock -> kops/s: 48.711 io_bytes/op: 1566.63 miss_ratio: 0.0198923 max_rss_mb: 1691.4 1597MB 1thread new_clock -> kops/s: 51.531 io_bytes/op: 1589.07 miss_ratio: 0.0201969 max_rss_mb: 1583.56 1597MB 32thread base -> kops/s: 301.174 io_bytes/op: 1439.52 miss_ratio: 0.0184218 max_rss_mb: 1656.59 1597MB 32thread folly -> kops/s: 273.09 io_bytes/op: 1375.12 miss_ratio: 0.0180002 max_rss_mb: 1586.8 1597MB 32thread gt_clock -> kops/s: 904.497 io_bytes/op: 1411.29 miss_ratio: 0.0179934 max_rss_mb: 1775.89 1597MB 32thread new_clock -> kops/s: 1182.59 io_bytes/op: 1440.77 miss_ratio: 0.0185449 max_rss_mb: 1636.45 1597MB 128thread base -> kops/s: 309.91 io_bytes/op: 1438.25 miss_ratio: 0.018399 max_rss_mb: 1689.98 1597MB 128thread folly -> kops/s: 267.605 io_bytes/op: 1394.16 miss_ratio: 0.0180286 max_rss_mb: 1631.91 1597MB 128thread gt_clock -> kops/s: 691.518 io_bytes/op: 9056.73 miss_ratio: 0.0186572 max_rss_mb: 1982.26 1597MB 128thread new_clock -> kops/s: 1406.12 io_bytes/op: 1440.82 miss_ratio: 0.0185463 max_rss_mb: 1685.63 610MB 1thread base -> kops/s: 45.511 io_bytes/op: 2279.61 miss_ratio: 0.0290528 max_rss_mb: 615.137 610MB 1thread folly -> kops/s: 43.386 io_bytes/op: 2217.29 miss_ratio: 0.0289282 max_rss_mb: 600.996 610MB 1thread gt_clock -> kops/s: 46.207 io_bytes/op: 2275.51 miss_ratio: 0.0290057 max_rss_mb: 637.934 610MB 1thread new_clock -> kops/s: 48.879 io_bytes/op: 2283.1 miss_ratio: 0.0291253 max_rss_mb: 613.5 610MB 32thread base -> kops/s: 306.59 io_bytes/op: 2250 miss_ratio: 0.0288721 max_rss_mb: 683.402 610MB 32thread folly -> kops/s: 269.176 io_bytes/op: 2187.86 miss_ratio: 0.0286938 max_rss_mb: 628.742 610MB 32thread gt_clock -> kops/s: 855.097 io_bytes/op: 2279.26 miss_ratio: 0.0288009 max_rss_mb: 733.062 610MB 32thread new_clock -> kops/s: 1121.47 io_bytes/op: 2244.29 miss_ratio: 0.0289046 max_rss_mb: 666.453 610MB 128thread base -> kops/s: 305.079 io_bytes/op: 2252.43 miss_ratio: 0.0288884 max_rss_mb: 723.457 610MB 128thread folly -> kops/s: 269.583 io_bytes/op: 2204.58 miss_ratio: 0.0287001 max_rss_mb: 676.426 610MB 128thread gt_clock -> kops/s: 53.298 io_bytes/op: 8128.98 miss_ratio: 0.0292452 max_rss_mb: 956.273 610MB 128thread new_clock -> kops/s: 1301.09 io_bytes/op: 2246.04 miss_ratio: 0.0289171 max_rss_mb: 788.812 The new version is still winning every time, sometimes dramatically so, and we can tell from the maximum resident memory numbers (which contain some noise, by the way) that the new cache is not cheating on memory usage. IMPORTANT: The previous generation experimental clock cache appears to hit a serious bottleneck in the higher thread count configurations, presumably due to some of its waiting functionality. (The same bottleneck is not seen with partitioned index+filters.) Now we consider even smaller cache sizes, with higher miss ratios, eviction work, etc. 233MB 1thread base -> kops/s: 10.557 io_bytes/op: 227040 miss_ratio: 0.0403105 max_rss_mb: 247.371 233MB 1thread folly -> kops/s: 15.348 io_bytes/op: 112007 miss_ratio: 0.0372238 max_rss_mb: 245.293 233MB 1thread gt_clock -> kops/s: 6.365 io_bytes/op: 244854 miss_ratio: 0.0413873 max_rss_mb: 259.844 233MB 1thread new_clock -> kops/s: 47.501 io_bytes/op: 2591.93 miss_ratio: 0.0330989 max_rss_mb: 242.461 233MB 32thread base -> kops/s: 96.498 io_bytes/op: 363379 miss_ratio: 0.0459966 max_rss_mb: 479.227 233MB 32thread folly -> kops/s: 109.95 io_bytes/op: 314799 miss_ratio: 0.0450032 max_rss_mb: 400.738 233MB 32thread gt_clock -> kops/s: 2.353 io_bytes/op: 385397 miss_ratio: 0.048445 max_rss_mb: 500.688 233MB 32thread new_clock -> kops/s: 1088.95 io_bytes/op: 2567.02 miss_ratio: 0.0330593 max_rss_mb: 303.402 233MB 128thread base -> kops/s: 84.302 io_bytes/op: 378020 miss_ratio: 0.0466558 max_rss_mb: 1051.84 233MB 128thread folly -> kops/s: 89.921 io_bytes/op: 338242 miss_ratio: 0.0460309 max_rss_mb: 812.785 233MB 128thread gt_clock -> kops/s: 2.588 io_bytes/op: 462833 miss_ratio: 0.0509158 max_rss_mb: 1109.94 233MB 128thread new_clock -> kops/s: 1299.26 io_bytes/op: 2565.94 miss_ratio: 0.0330531 max_rss_mb: 361.016 89MB 1thread base -> kops/s: 0.574 io_bytes/op: 5.35977e+06 miss_ratio: 0.274427 max_rss_mb: 91.3086 89MB 1thread folly -> kops/s: 0.578 io_bytes/op: 5.16549e+06 miss_ratio: 0.27276 max_rss_mb: 96.8984 89MB 1thread gt_clock -> kops/s: 0.512 io_bytes/op: 4.13111e+06 miss_ratio: 0.242817 max_rss_mb: 119.441 89MB 1thread new_clock -> kops/s: 48.172 io_bytes/op: 2709.76 miss_ratio: 0.0346162 max_rss_mb: 100.754 89MB 32thread base -> kops/s: 5.779 io_bytes/op: 6.14192e+06 miss_ratio: 0.320399 max_rss_mb: 311.812 89MB 32thread folly -> kops/s: 5.601 io_bytes/op: 5.83838e+06 miss_ratio: 0.313123 max_rss_mb: 252.418 89MB 32thread gt_clock -> kops/s: 0.77 io_bytes/op: 3.99236e+06 miss_ratio: 0.236296 max_rss_mb: 396.422 89MB 32thread new_clock -> kops/s: 1064.97 io_bytes/op: 2687.23 miss_ratio: 0.0346134 max_rss_mb: 155.293 89MB 128thread base -> kops/s: 4.959 io_bytes/op: 6.20297e+06 miss_ratio: 0.323945 max_rss_mb: 823.43 89MB 128thread folly -> kops/s: 4.962 io_bytes/op: 5.9601e+06 miss_ratio: 0.319857 max_rss_mb: 626.824 89MB 128thread gt_clock -> kops/s: 1.009 io_bytes/op: 4.1083e+06 miss_ratio: 0.242512 max_rss_mb: 1095.32 89MB 128thread new_clock -> kops/s: 1224.39 io_bytes/op: 2688.2 miss_ratio: 0.0346207 max_rss_mb: 218.223 ^ Now something interesting has happened: the new clock cache has gained a dramatic lead in the single-threaded case, and this is because the cache is so small, and full filters are so big, that dividing the cache into 64 shards leads to significant (random) imbalances in cache shards and excessive churn in imbalanced shards. This new clock cache only uses two shards for this configuration, and that helps to ensure that entries are part of a sufficiently big pool that their eviction order resembles the single-shard order. (This effect is not seen with partitioned index+filters.) Even smaller cache size: 34MB 1thread base -> kops/s: 0.198 io_bytes/op: 1.65342e+07 miss_ratio: 0.939466 max_rss_mb: 48.6914 34MB 1thread folly -> kops/s: 0.201 io_bytes/op: 1.63416e+07 miss_ratio: 0.939081 max_rss_mb: 45.3281 34MB 1thread gt_clock -> kops/s: 0.448 io_bytes/op: 4.43957e+06 miss_ratio: 0.266749 max_rss_mb: 100.523 34MB 1thread new_clock -> kops/s: 1.055 io_bytes/op: 1.85439e+06 miss_ratio: 0.107512 max_rss_mb: 75.3125 34MB 32thread base -> kops/s: 3.346 io_bytes/op: 1.64852e+07 miss_ratio: 0.93596 max_rss_mb: 180.48 34MB 32thread folly -> kops/s: 3.431 io_bytes/op: 1.62857e+07 miss_ratio: 0.935693 max_rss_mb: 137.531 34MB 32thread gt_clock -> kops/s: 1.47 io_bytes/op: 4.89704e+06 miss_ratio: 0.295081 max_rss_mb: 392.465 34MB 32thread new_clock -> kops/s: 8.19 io_bytes/op: 3.70456e+06 miss_ratio: 0.20826 max_rss_mb: 519.793 34MB 128thread base -> kops/s: 2.293 io_bytes/op: 1.64351e+07 miss_ratio: 0.931866 max_rss_mb: 449.484 34MB 128thread folly -> kops/s: 2.34 io_bytes/op: 1.6219e+07 miss_ratio: 0.932023 max_rss_mb: 396.457 34MB 128thread gt_clock -> kops/s: 1.798 io_bytes/op: 5.4241e+06 miss_ratio: 0.324881 max_rss_mb: 1104.41 34MB 128thread new_clock -> kops/s: 10.519 io_bytes/op: 2.39354e+06 miss_ratio: 0.136147 max_rss_mb: 1050.52 As the miss ratio gets higher (say, above 10%), the CPU time spent in eviction starts to erode the advantage of using fewer shards (13% miss rate much lower than 94%). LRU's O(1) eviction time can eventually pay off when there's enough block cache churn: 13MB 1thread base -> kops/s: 0.195 io_bytes/op: 1.65732e+07 miss_ratio: 0.946604 max_rss_mb: 45.6328 13MB 1thread folly -> kops/s: 0.197 io_bytes/op: 1.63793e+07 miss_ratio: 0.94661 max_rss_mb: 33.8633 13MB 1thread gt_clock -> kops/s: 0.519 io_bytes/op: 4.43316e+06 miss_ratio: 0.269379 max_rss_mb: 100.684 13MB 1thread new_clock -> kops/s: 0.176 io_bytes/op: 1.54148e+07 miss_ratio: 0.91545 max_rss_mb: 66.2383 13MB 32thread base -> kops/s: 3.266 io_bytes/op: 1.65544e+07 miss_ratio: 0.943386 max_rss_mb: 132.492 13MB 32thread folly -> kops/s: 3.396 io_bytes/op: 1.63142e+07 miss_ratio: 0.943243 max_rss_mb: 101.863 13MB 32thread gt_clock -> kops/s: 2.758 io_bytes/op: 5.13714e+06 miss_ratio: 0.310652 max_rss_mb: 396.121 13MB 32thread new_clock -> kops/s: 3.11 io_bytes/op: 1.23419e+07 miss_ratio: 0.708425 max_rss_mb: 321.758 13MB 128thread base -> kops/s: 2.31 io_bytes/op: 1.64823e+07 miss_ratio: 0.939543 max_rss_mb: 425.539 13MB 128thread folly -> kops/s: 2.339 io_bytes/op: 1.6242e+07 miss_ratio: 0.939966 max_rss_mb: 346.098 13MB 128thread gt_clock -> kops/s: 3.223 io_bytes/op: 5.76928e+06 miss_ratio: 0.345899 max_rss_mb: 1087.77 13MB 128thread new_clock -> kops/s: 2.984 io_bytes/op: 1.05341e+07 miss_ratio: 0.606198 max_rss_mb: 898.27 gt_clock is clearly blowing way past its memory budget for lower miss rates and best throughput. new_clock also seems to be exceeding budgets, and this warrants more investigation but is not the use case we are targeting with the new cache. With partitioned index+filter, the miss ratio is much better, and although still high enough that the eviction CPU time is definitely offsetting mutex contention: 13MB 1thread base -> kops/s: 16.326 io_bytes/op: 23743.9 miss_ratio: 0.205362 max_rss_mb: 65.2852 13MB 1thread folly -> kops/s: 15.574 io_bytes/op: 19415 miss_ratio: 0.184157 max_rss_mb: 56.3516 13MB 1thread gt_clock -> kops/s: 14.459 io_bytes/op: 22873 miss_ratio: 0.198355 max_rss_mb: 63.9688 13MB 1thread new_clock -> kops/s: 16.34 io_bytes/op: 24386.5 miss_ratio: 0.210512 max_rss_mb: 61.707 13MB 128thread base -> kops/s: 289.786 io_bytes/op: 23710.9 miss_ratio: 0.205056 max_rss_mb: 103.57 13MB 128thread folly -> kops/s: 185.282 io_bytes/op: 19433.1 miss_ratio: 0.184275 max_rss_mb: 116.219 13MB 128thread gt_clock -> kops/s: 354.451 io_bytes/op: 23150.6 miss_ratio: 0.200495 max_rss_mb: 102.871 13MB 128thread new_clock -> kops/s: 295.359 io_bytes/op: 24626.4 miss_ratio: 0.212452 max_rss_mb: 121.109 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10626 Test Plan: updated unit tests, stress/crash test runs including with TSAN, ASAN, UBSAN Reviewed By: anand1976 Differential Revision: D39368406 Pulled By: pdillinger fbshipit-source-id: 5afc44da4c656f8f751b44552bbf27bd3ca6fef9	2 years ago
Jay Zhuang	d9e71fb2c5	Fix periodic_task unable to re-register the same task type (#10379) ... Summary: Timer has a limitation that it cannot re-register a task with the same name, because the cancel only mark the task as invalid and wait for the Timer thread to clean it up later, before the task is cleaned up, the same task name cannot be added. Which makes the task option update likely to fail, which basically cancel and re-register the same task name. Change the periodic task name to a random unique id and store it in periodic_task_scheduler. Also refactor the `periodic_work` to `periodic_task` to make each job function as a `task`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10379 Test Plan: unittests Reviewed By: ajkr Differential Revision: D38000615 Pulled By: jay-zhuang fbshipit-source-id: e4135f9422e3b53aaec8eda54f4e18ce633a279e	2 years ago
Gang Liao	d7ebb58cb5	Add blob cache tickers, perf context statistics, and DB properties (#10203) ... Summary: In order to be able to monitor the performance of the new blob cache, we made the follow changes: - Add blob cache hit/miss/insertion tickers (see https://github.com/facebook/rocksdb/wiki/Statistics) - Extend the perf context similarly (see https://github.com/facebook/rocksdb/wiki/Perf-Context-and-IO-Stats-Context) - Implement new DB properties (see e.g. https://github.com/facebook/rocksdb/blob/main/include/rocksdb/db.h#L1042-L1051) that expose the capacity and current usage of the blob cache. This PR is a part of https://github.com/facebook/rocksdb/issues/10156 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10203 Reviewed By: ltamasi Differential Revision: D37478658 Pulled By: gangliao fbshipit-source-id: d8ee3f41d47315ef725e4551226330b4b6832e40	2 years ago
sdong	736a7b5433	Remove own ToString() (#9955) ... Summary: ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString(). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955 Test Plan: Watch CI tests Reviewed By: riversand963 Differential Revision: D36176799 fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471	3 years ago
Andrew Kryczka	d6e016be6d	Expose `CacheEntryRole` and map keys for block cache stat collections (#9838) ... Summary: This gives users the ability to examine the map populated by `GetMapProperty()` with property `kBlockCacheEntryStats`. It also sets us up for a possible future where cache reservations are configured according to `CacheEntryRole`s rather than flags coupled to roles. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9838 Test Plan: - migrated test DBBlockCacheTest.CacheEntryRoleStats to use this API. That test verifies some of the contents are as expected - added a DBPropertiesTest to verify the public map keys are present, and nothing else Reviewed By: hx235 Differential Revision: D35629493 Pulled By: ajkr fbshipit-source-id: 5c4356b8560e85d1f881fd32c44c15960b02fc68	3 years ago
Levi Tamasi	5645207758	Expose the amount of garbage in live blob files as a dedicated DB property (#9835) ... Summary: This information has been already available as part of the `rocksdb.blob-stats` string property. The patch adds a dedicated integer property to make it easier to surface this information in monitoring systems. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9835 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D35619495 Pulled By: ltamasi fbshipit-source-id: 03fb0b228aa27d3859a1e3783bcb7eca095607f8	3 years ago
Peter Dillinger	efd035164b	Meta-internal folly integration with F14FastMap (#9546) ... Summary: Especially after updating to C++17, I don't see a compelling case for *requiring* any folly components in RocksDB. I was able to purge the existing hard dependencies, and it can be quite difficult to strip out non-trivial components from folly for use in RocksDB. (The prospect of doing that on F14 has changed my mind on the best approach here.) But this change creates an optional integration where we can plug in components from folly at compile time, starting here with F14FastMap to replace std::unordered_map when possible (probably no public APIs for example). I have replaced the biggest CPU users of std::unordered_map with compile-time pluggable UnorderedMap which will use F14FastMap when USE_FOLLY is set. USE_FOLLY is always set in the Meta-internal buck build, and a simulation of that is in the Makefile for public CI testing. A full folly build is not needed, but checking out the full folly repo is much simpler for getting the dependency, and anything else we might want to optionally integrate in the future. Some picky details: * I don't think the distributed mutex stuff is actually used, so it was easy to remove. * I implemented an alternative to `folly::constexpr_log2` (which is much easier in C++17 than C++11) so that I could pull out the hard dependencies on `ConstexprMath.h` * I had to add noexcept move constructors/operators to some types to make F14's complainUnlessNothrowMoveAndDestroy check happy, and I added a macro to make that easier in some common cases. * Updated Meta-internal buck build to use folly F14Map (always) No updates to HISTORY.md nor INSTALL.md as this is not (yet?) considered a production integration for open source users. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9546 Test Plan: CircleCI tests updated so that a couple of them use folly. Most internal unit & stress/crash tests updated to use Meta-internal latest folly. (Note: they should probably use buck but they currently use Makefile.) Example performance improvement: when filter partitions are pinned in cache, they are tracked by PartitionedFilterBlockReader::filter_map_ and we can build a test that exercises that heavily. Build DB with ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters ``` and test with (simultaneous runs with & without folly, ~20 times each to see convergence) ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench_folly -readonly -use_existing_db -benchmarks=readrandom -num=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters -duration=40 -pin_l0_filter_and_index_blocks_in_cache ``` Average ops/s no folly: 26229.2 Average ops/s with folly: 26853.3 (+2.4%) Reviewed By: ajkr Differential Revision: D34181736 Pulled By: pdillinger fbshipit-source-id: ffa6ad5104c2880321d8a1aa7187e00ab0d02e94	3 years ago
Peter Dillinger	a8a422e962	Add manifest fix-up utility for file temperatures (#9683) ... Summary: The goal of this change is to allow changes to the "current" (in FileSystem) file temperatures to feed back into DB metadata, so that they can inform decisions and stats reporting. In part because of modular code factoring, it doesn't seem easy to do this automagically, where opening an SST file and observing current Temperature different from expected would trigger a change in metadata and DB manifest write (essentially giving the deep read path access to the write path). It is also difficult to do this while the DB is open because of the limitations of LogAndApply. This change allows updating file temperature metadata on a closed DB using an experimental utility function UpdateManifestForFilesState() or `ldb update_manifest --update_temperatures`. This should suffice for "migration" scenarios where outside tooling has placed or re-arranged DB files into a (different) tiered configuration without going through RocksDB itself (currently, only compaction can change temperature metadata). Some details: * Refactored and added unit test for `ldb unsafe_remove_sst_file` because of shared functionality * Pulled in autovector.h changes from https://github.com/facebook/rocksdb/issues/9546 to fix SuperVersionContext move constructor (related to an older draft of this change) Possible follow-up work: * Support updating manifest with file checksums, such as when a new checksum function is used and want existing DB metadata updated for it. * It's possible that for some repair scenarios, lighter weight than full repair, we might want to support UpdateManifestForFilesState() to modify critical file details like size or checksum using same algorithm. But let's make sure these are differentiated from modifying file details in ways that don't suspect corruption (or require extreme trust). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9683 Test Plan: unit tests added Reviewed By: jay-zhuang Differential Revision: D34798828 Pulled By: pdillinger fbshipit-source-id: cfd83e8fb10761d8c9e7f9c020d68c9106a95554	3 years ago
Levi Tamasi	073ac54739	Log blob file space amp and expose it via the rocksdb.blob-stats DB property (#9538) ... Summary: Extend the periodic statistics in the info log with the total amount of garbage in blob files and the space amplification pertaining to blob files, where the latter is defined as `total_blob_file_size / (total_blob_file_size - total_blob_garbage_size)`. Also expose the space amp via the `rocksdb.blob-stats` DB property. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9538 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D34126855 Pulled By: ltamasi fbshipit-source-id: 3153e7a0fe0eca440322db273f4deaabaccc51b2	3 years ago
Levi Tamasi	320d9a8e8a	Use a sorted vector instead of a map to store blob file metadata (#9526) ... Summary: The patch replaces `std::map` with a sorted `std::vector` for `VersionStorageInfo::blob_files_` and preallocates the space for the `vector` before saving the `BlobFileMetaData` into the new `VersionStorageInfo` in `VersionBuilder::Rep::SaveBlobFilesTo`. These changes reduce the time the DB mutex is held while saving new `Version`s, and using a sorted `vector` also makes lookups faster thanks to better memory locality. In addition, the patch introduces helper methods `VersionStorageInfo::GetBlobFileMetaData` and `VersionStorageInfo::GetBlobFileMetaDataLB` that can be used by clients to perform lookups in the `vector`, and does some general cleanup in the parts of code where blob file metadata are used. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9526 Test Plan: Ran `make check` and the crash test script for a while. Performance was tested using a load-optimized benchmark (`fillseq` with vector memtable, no WAL) and small file sizes so that a significant number of files are produced: ``` numactl --interleave=all ./db_bench --benchmarks=fillseq --allow_concurrent_memtable_write=false --level0_file_num_compaction_trigger=4 --level0_slowdown_writes_trigger=20 --level0_stop_writes_trigger=30 --max_background_jobs=8 --max_write_buffer_number=8 --db=/data/ltamasi-dbbench --wal_dir=/data/ltamasi-dbbench --num=800000000 --num_levels=8 --key_size=20 --value_size=400 --block_size=8192 --cache_size=51539607552 --cache_numshardbits=6 --compression_max_dict_bytes=0 --compression_ratio=0.5 --compression_type=lz4 --bytes_per_sync=8388608 --cache_index_and_filter_blocks=1 --cache_high_pri_pool_ratio=0.5 --benchmark_write_rate_limit=0 --write_buffer_size=16777216 --target_file_size_base=16777216 --max_bytes_for_level_base=67108864 --verify_checksum=1 --delete_obsolete_files_period_micros=62914560 --max_bytes_for_level_multiplier=8 --statistics=0 --stats_per_interval=1 --stats_interval_seconds=20 --histogram=1 --memtablerep=skip_list --bloom_bits=10 --open_files=-1 --subcompactions=1 --compaction_style=0 --min_level_to_compress=3 --level_compaction_dynamic_level_bytes=true --pin_l0_filter_and_index_blocks_in_cache=1 --soft_pending_compaction_bytes_limit=167503724544 --hard_pending_compaction_bytes_limit=335007449088 --min_level_to_compress=0 --use_existing_db=0 --sync=0 --threads=1 --memtablerep=vector --allow_concurrent_memtable_write=false --disable_wal=1 --enable_blob_files=1 --blob_file_size=16777216 --min_blob_size=0 --blob_compression_type=lz4 --enable_blob_garbage_collection=1 --seed=<some value> ``` Final statistics before the patch: ``` Cumulative writes: 0 writes, 700M keys, 0 commit groups, 0.0 writes per commit group, ingest: 284.62 GB, 121.27 MB/s Interval writes: 0 writes, 334K keys, 0 commit groups, 0.0 writes per commit group, ingest: 139.28 MB, 72.46 MB/s ``` With the patch: ``` Cumulative writes: 0 writes, 760M keys, 0 commit groups, 0.0 writes per commit group, ingest: 308.66 GB, 131.52 MB/s Interval writes: 0 writes, 445K keys, 0 commit groups, 0.0 writes per commit group, ingest: 185.35 MB, 93.15 MB/s ``` Total time to complete the benchmark is 2611 seconds with the patch, down from 2986 secs. Reviewed By: riversand963 Differential Revision: D34082728 Pulled By: ltamasi fbshipit-source-id: fc598abf676dce436734d06bb9d2d99a26a004fc	3 years ago
leipeng	01bd86ad35	InternalStats::DumpCFMapStat: fix sum.w_amp (#9065) ... Summary: sum `w_amp` will be a very large number`(bytes_written + bytes_written_blob)` when there is no any flush and ingest. This PR set sum `w_amp` to zero if there is no any flush and ingest, this is conform to per-level `w_amp` computation. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9065 Reviewed By: ajkr Differential Revision: D31943994 Pulled By: riversand963 fbshipit-source-id: acbef5e331debebfad09e0e0d8d0885ebbc00609	3 years ago
Andrew Kryczka	4217d1bce7	Support `GetMapProperty()` with "rocksdb.dbstats" (#9057) ... Summary: This PR supports querying `GetMapProperty()` with "rocksdb.dbstats" to get the DB-level stats in a map format. It only reports cumulative stats over the DB lifetime and, as such, does not update the baseline for interval stats. Like other map properties, the string keys are not (yet) exposed in the public API. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9057 Test Plan: new unit test Reviewed By: zhichao-cao Differential Revision: D31781495 Pulled By: ajkr fbshipit-source-id: 6f77d3aee8b4b1a015061b8c260a123859ceaf9b	3 years ago
Levi Tamasi	306b779957	Use GetBlobFileSize instead of GetTotalBlobBytes in DB properties (#8902) ... Summary: The patch adjusts the definition of BlobDB's DB properties a bit by switching to `GetBlobFileSize` from `GetTotalBlobBytes`. The difference is that the value returned by `GetBlobFileSize` includes the blob file header and footer as well, and thus matches the on-disk size of blob files. In addition, the patch removes the `Version` number from the `blob_stats` property, and updates/extends the unit tests a little. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8902 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D30859542 Pulled By: ltamasi fbshipit-source-id: e3426d2d567bd1bd8c8636abdafaafa0743c854c	3 years ago
Zhiyi Zhang	0cb0fc6fd3	Add DB properties for BlobDB (#8734) ... Summary: RocksDB exposes certain internal statistics via the DB property interface. However, there are currently no properties related to BlobDB. For starters, we would like to add the following BlobDB properties: `rocksdb.num-blob-files`: number of blob files in the current Version (kind of like `num-files-at-level` but note this is not per level, since blob files are not part of the LSM tree). `rocksdb.blob-stats`: this could return the total number and size of all blob files, and potentially also the total amount of garbage (in bytes) in the blob files in the current Version. `rocksdb.total-blob-file-size`: the total size of all blob files (as a blob counterpart for `total-sst-file-size`) of all Versions. `rocksdb.live-blob-file-size`: the total size of all blob files in the current Version. `rocksdb.estimate-live-data-size`: this is actually an existing property that we can extend so it considers blob files as well. When it comes to blobs, we actually have an exact value for live bytes. Namely, live bytes can be computed simply as total bytes minus garbage bytes, summed over the entire set of blob files in the Version. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8734 Test Plan: ``` ➜ rocksdb git:(new_feature_blobDB_properties) ./db_blob_basic_test [==========] Running 16 tests from 2 test cases. [----------] Global test environment set-up. [----------] 10 tests from DBBlobBasicTest [ RUN ] DBBlobBasicTest.GetBlob [ OK ] DBBlobBasicTest.GetBlob (12 ms) [ RUN ] DBBlobBasicTest.MultiGetBlobs [ OK ] DBBlobBasicTest.MultiGetBlobs (11 ms) [ RUN ] DBBlobBasicTest.GetBlob_CorruptIndex [ OK ] DBBlobBasicTest.GetBlob_CorruptIndex (10 ms) [ RUN ] DBBlobBasicTest.GetBlob_InlinedTTLIndex [ OK ] DBBlobBasicTest.GetBlob_InlinedTTLIndex (12 ms) [ RUN ] DBBlobBasicTest.GetBlob_IndexWithInvalidFileNumber [ OK ] DBBlobBasicTest.GetBlob_IndexWithInvalidFileNumber (9 ms) [ RUN ] DBBlobBasicTest.GenerateIOTracing [ OK ] DBBlobBasicTest.GenerateIOTracing (11 ms) [ RUN ] DBBlobBasicTest.BestEffortsRecovery_MissingNewestBlobFile [ OK ] DBBlobBasicTest.BestEffortsRecovery_MissingNewestBlobFile (13 ms) [ RUN ] DBBlobBasicTest.GetMergeBlobWithPut [ OK ] DBBlobBasicTest.GetMergeBlobWithPut (11 ms) [ RUN ] DBBlobBasicTest.MultiGetMergeBlobWithPut [ OK ] DBBlobBasicTest.MultiGetMergeBlobWithPut (14 ms) [ RUN ] DBBlobBasicTest.BlobDBProperties [ OK ] DBBlobBasicTest.BlobDBProperties (21 ms) [----------] 10 tests from DBBlobBasicTest (124 ms total) [----------] 6 tests from DBBlobBasicTest/DBBlobBasicIOErrorTest [ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.GetBlob_IOError/0 [ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.GetBlob_IOError/0 (12 ms) [ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.GetBlob_IOError/1 [ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.GetBlob_IOError/1 (10 ms) [ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.MultiGetBlobs_IOError/0 [ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.MultiGetBlobs_IOError/0 (10 ms) [ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.MultiGetBlobs_IOError/1 [ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.MultiGetBlobs_IOError/1 (10 ms) [ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.CompactionFilterReadBlob_IOError/0 [ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.CompactionFilterReadBlob_IOError/0 (1011 ms) [ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.CompactionFilterReadBlob_IOError/1 [ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.CompactionFilterReadBlob_IOError/1 (1013 ms) [----------] 6 tests from DBBlobBasicTest/DBBlobBasicIOErrorTest (2066 ms total) [----------] Global test environment tear-down [==========] 16 tests from 2 test cases ran. (2190 ms total) [ PASSED ] 16 tests. ``` Reviewed By: ltamasi Differential Revision: D30690849 Pulled By: Zhiyi-Zhang fbshipit-source-id: a7567319487ad76bd1a2e24bf143afdbbd9e4346	3 years ago
Peter Dillinger	318fe6941a	Add port::GetProcessID() (#8693) ... Summary: Useful in some places for object uniqueness across processes. Currently used for generating a host-wide identifier of Cache objects but expected to be used soon in some unique id generation code. `int64_t` is chosen for return type because POSIX uses signed integer type, usually `int`, for `pid_t` and Windows uses `DWORD`, which is `uint32_t`. Future work: avoid copy-pasted declarations in port_*.h, perhaps with port_common.h always included from port.h Pull Request resolved: https://github.com/facebook/rocksdb/pull/8693 Test Plan: manual for now Reviewed By: ajkr, anand1976 Differential Revision: D30492876 Pulled By: pdillinger fbshipit-source-id: 39fc2788623cc9f4787866bdb67a4d183dde7eef	3 years ago
Jay Zhuang	c55460c734	Add property `LiveSstFilesSizeAtTemperature` for tiered storage (#8644) ... Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/8644 Reviewed By: siying, zhichao-cao Differential Revision: D30236535 Pulled By: jay-zhuang fbshipit-source-id: 1758d1c46d83a5087560fb63d53a016bf999da81	3 years ago
Peter Dillinger	df5dc73bec	Don't hold DB mutex for block cache entry stat scans (#8538) ... Summary: I previously didn't notice the DB mutex was being held during block cache entry stat scans, probably because I primarily checked for read performance regressions, because they require the block cache and are traditionally latency-sensitive. This change does some refactoring to avoid holding DB mutex and to avoid triggering and waiting for a scan in GetProperty("rocksdb.cfstats"). Some tests have to be updated because now the stats collector is populated in the Cache aggressively on DB startup rather than lazily. (I hope to clean up some of this added complexity in the future.) This change also ensures proper treatment of need_out_of_mutex for non-int DB properties. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8538 Test Plan: Added unit test logic that uses sync points to fail if the DB mutex is held during a scan, covering the various ways that a scan might be triggered. Performance test - the known impact to holding the DB mutex is on TransactionDB, and the easiest way to see the impact is to hack the scan code to almost always miss and take an artificially long time scanning. Here I've injected an unconditional 5s sleep at the call to ApplyToAllEntries. Before (hacked): $ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op' randomtransaction : 433.219 micros/op 2308 ops/sec; 0.1 MB/s ( transactions:78999 aborts:0) rocksdb.db.write.micros P50 : 16.135883 P95 : 36.622503 P99 : 66.036115 P100 : 5000614.000000 COUNT : 149677 SUM : 8364856 $ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op' randomtransaction : 448.802 micros/op 2228 ops/sec; 0.1 MB/s ( transactions:75999 aborts:0) rocksdb.db.write.micros P50 : 16.629221 P95 : 37.320607 P99 : 72.144341 P100 : 5000871.000000 COUNT : 143995 SUM : 13472323 Notice the 5s P100 write time. After (hacked): $ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op' randomtransaction : 303.645 micros/op 3293 ops/sec; 0.1 MB/s ( transactions:98999 aborts:0) rocksdb.db.write.micros P50 : 16.061871 P95 : 33.978834 P99 : 60.018017 P100 : 616315.000000 COUNT : 187619 SUM : 4097407 $ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op' randomtransaction : 310.383 micros/op 3221 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0) rocksdb.db.write.micros P50 : 16.270026 P95 : 35.786844 P99 : 64.302878 P100 : 603088.000000 COUNT : 183819 SUM : 4095918 P100 write is now ~0.6s. Not good, but it's the same even if I completely bypass all the scanning code: $ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op' randomtransaction : 311.365 micros/op 3211 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0) rocksdb.db.write.micros P50 : 16.274362 P95 : 36.221184 P99 : 68.809783 P100 : 649808.000000 COUNT : 183819 SUM : 4156767 $ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op' randomtransaction : 308.395 micros/op 3242 ops/sec; 0.1 MB/s ( transactions:97999 aborts:0) rocksdb.db.write.micros P50 : 16.106222 P95 : 37.202403 P99 : 67.081875 P100 : 598091.000000 COUNT : 185714 SUM : 4098832 No substantial difference. Reviewed By: siying Differential Revision: D29738847 Pulled By: pdillinger fbshipit-source-id: 1c5c155f5a1b62e4fea0fd4eeb515a8b7474027b	3 years ago
Peter Dillinger	d5a46c40e5	Pin CacheEntryStatsCollector to fix performance bug (#8385) ... Summary: If the block Cache is full with strict_capacity_limit=false, then our CacheEntryStatsCollector could be immediately evicted on release, so iterating through column families with shared block cache could trigger re-scan for each CF. This change fixes that problem by pinning the CacheEntryStatsCollector from InternalStats so that it's not evicted. I had originally thought that this object could participate in LRU like everything else, but even though a re-load+re-scan only touches memory, it can be orders of magnitude more expensive than other cache misses. One service in Facebook has scans that take ~20s over 100GB block cache that is mostly 4KB entries. (The up-side of this bug and https://github.com/facebook/rocksdb/issues/8369 is that we had a natural experiment on the effect on some service metrics even with block cache scans running continuously in the background--a kind of worst case scenario. Metrics like latency were not affected enough to trigger warnings.) Other smaller fixes: 20s is already a sizable portion of 600s stats dump period, or 180s default max age to force re-scan, so added logic to ensure that (for each block cache) we don't spend more than 0.2% of our background thread time scanning it. Nevertheless, "foreground" requests for cache entry stats (calls to `db->GetMapProperty(DB::Properties::kBlockCacheEntryStats)`) are permitted to consume more CPU. Renamed field to cache_entry_stats_ to match code style. This change is intended for patching in 6.21 release. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8385 Test Plan: unit test expanded to cover new logic (detect regression), some manual testing with db_bench Reviewed By: ajkr Differential Revision: D29042759 Pulled By: pdillinger fbshipit-source-id: 236faa902397f50038c618f50fbc8cf3f277308c	3 years ago
Peter Dillinger	2f93a3b809	Fix a major performance bug in 6.21 for cache entry stats (#8369) ... Summary: In final polishing of https://github.com/facebook/rocksdb/issues/8297 (after most manual testing), I broke my own caching layer by sanitizing an input parameter with std::min(0, x) instead of std::max(0, x). I resisted unit testing the timing part of the result caching because historically, these test are either flaky or difficult to write, and this was not a correctness issue. This bug is essentially unnoticeable with a small number of column families but can explode background work with a large number of column families. This change fixes the logical error, removes some unnecessary related optimization, and adds mock time/sleeps to the unit test to ensure we can cache hit within the age limit. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8369 Test Plan: added time testing logic to existing unit test Reviewed By: ajkr Differential Revision: D28950892 Pulled By: pdillinger fbshipit-source-id: e79cd4ff3eec68fd0119d994f1ed468c38026c3b	3 years ago
PiyushDatta	2655477c67	Fix "Interval WAL" bytes to say GB instead of MB (#8350) ... Summary: Reference: https://github.com/facebook/rocksdb/issues/7201 Before fix: `/tmp/rocksdb_test_file/LOG.old.1622492586055679:Interval WAL: 0 writes, 0 syncs, 0.00 writes per sync, written: 0.00 MB, 0.00 MB/s` After fix: `/tmp/rocksdb_test_file/LOG:Interval WAL: 0 writes, 0 syncs, 0.00 writes per sync, written: 0.00 GB, 0.00 MB/s` Tests: ``` Computer:jobs running/jobs completed/%of started jobs/Average seconds to complete ETA: 0s Left: 0 AVG: 0.05s local:0/7720/100%/0.0s rm -rf /dev/shm/rocksdb.CLRh /usr/bin/python3 tools/check_all_python.py No syntax errors in 34 .py files /usr/bin/python3 tools/ldb_test.py Running testCheckConsistency... .Running testColumnFamilies... .Running testCountDelimDump... .Running testCountDelimIDump... .Running testDumpLiveFiles... .Running testDumpLoad... Warning: 7 bad lines ignored. .Running testGetProperty... .Running testHexPutGet... .Running testIDumpBasics... .Running testIngestExternalSst... .Running testInvalidCmdLines... .Running testListColumnFamilies... .Running testManifestDump... .Running testMiscAdminTask... Sequence,Count,ByteSize,Physical Offset,Key(s) .Running testSSTDump... .Running testSimpleStringPutGet... .Running testStringBatchPut... .Running testTtlPutGet... .Running testWALDump... . ---------------------------------------------------------------------- Ran 19 tests in 15.945s OK sh tools/rocksdb_dump_test.sh make check-format make[1]: Entering directory '/home/piydatta/Documents/rocksdb' $DEBUG_LEVEL is 1 Makefile:176: Warning: Compiling in debug mode. Don't use the resulting binary in production build_tools/format-diff.sh -c Checking format of uncommitted changes... ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/8350 Reviewed By: jay-zhuang Differential Revision: D28790567 Pulled By: zhichao-cao fbshipit-source-id: dcb1e4c124361156435122f21f0a288335b2c8c8	4 years ago
Peter Dillinger	311a544c2a	Use deleters to label cache entries and collect stats (#8297) ... Summary: This change gathers and publishes statistics about the kinds of items in block cache. This is especially important for profiling relative usage of cache by index vs. filter vs. data blocks. It works by iterating over the cache during periodic stats dump (InternalStats, stats_dump_period_sec) or on demand when DB::Get(Map)Property(kBlockCacheEntryStats), except that for efficiency and sharing among column families, saved data from the last scan is used when the data is not considered too old. The new information can be seen in info LOG, for example: Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0 Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%) And also through DB::GetProperty and GetMapProperty (here using ldb just for demonstration): $ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats rocksdb.block-cache-entry-stats.bytes.data-block: 0 rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0 rocksdb.block-cache-entry-stats.bytes.filter-block: 0 rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0 rocksdb.block-cache-entry-stats.bytes.index-block: 178992 rocksdb.block-cache-entry-stats.bytes.misc: 0 rocksdb.block-cache-entry-stats.bytes.other-block: 0 rocksdb.block-cache-entry-stats.bytes.write-buffer: 0 rocksdb.block-cache-entry-stats.capacity: 8388608 rocksdb.block-cache-entry-stats.count.data-block: 0 rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0 rocksdb.block-cache-entry-stats.count.filter-block: 0 rocksdb.block-cache-entry-stats.count.filter-meta-block: 0 rocksdb.block-cache-entry-stats.count.index-block: 215 rocksdb.block-cache-entry-stats.count.misc: 1 rocksdb.block-cache-entry-stats.count.other-block: 0 rocksdb.block-cache-entry-stats.count.write-buffer: 0 rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290 rocksdb.block-cache-entry-stats.percent.data-block: 0.000000 rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000 rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000 rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000 rocksdb.block-cache-entry-stats.percent.index-block: 2.133751 rocksdb.block-cache-entry-stats.percent.misc: 0.000000 rocksdb.block-cache-entry-stats.percent.other-block: 0.000000 rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000 rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052 rocksdb.block-cache-entry-stats.secs_since_last_collection: 0 Solution detail - We need some way to flag what kind of blocks each entry belongs to, preferably without changing the Cache API. One of the complications is that Cache is a general interface that could have other users that don't adhere to whichever convention we decide on for keys and values. Or we would pay for an extra field in the Handle that would only be used for this purpose. This change uses a back-door approach, the deleter, to indicate the "role" of a Cache entry (in addition to the value type, implicitly). This has the added benefit of ensuring proper code origin whenever we recognize a particular role for a cache entry; if the entry came from some other part of the code, it will use an unrecognized deleter, which we simply attribute to the "Misc" role. An internal API makes for simple instantiation and automatic registration of Cache deleters for a given value type and "role". Another internal API, CacheEntryStatsCollector, solves the problem of caching the results of a scan and sharing them, to ensure scans are neither excessive nor redundant so as not to harm Cache performance. Because code is added to BlocklikeTraits, it is pulled out of block_based_table_reader.cc into its own file. This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option (could still be added), and with actual stat gathering. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297 Test Plan: manual testing with db_bench, and a couple of basic unit tests Reviewed By: ltamasi Differential Revision: D28488721 Pulled By: pdillinger fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb	4 years ago
mrambacher	01e460d538	Make types of Immutable/Mutable Options fields match that of the underlying Option (#8176) ... Summary: This PR is a first step at attempting to clean up some of the Mutable/Immutable Options code. With this change, a DBOption and a ColumnFamilyOption can be reconstructed from their Mutable and Immutable equivalents, respectively. readrandom tests do not show any performance degradation versus master (though both are slightly slower than the current 6.19 release). There are still fields in the ImmutableCFOptions that are not CF options but DB options. Eventually, I would like to move those into an ImmutableOptions (= ImmutableDBOptions+ImmutableCFOptions). But that will be part of a future PR to minimize changes and disruptions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8176 Reviewed By: pdillinger Differential Revision: D27954339 Pulled By: mrambacher fbshipit-source-id: ec6b805ba9afe6e094bffdbd76246c2d99aa9fad	4 years ago
Levi Tamasi	0c6e4674a6	Fix a data race related to DB properties (#8206) ... Summary: Historically, the DB properties `rocksdb.cur-size-active-mem-table`, `rocksdb.cur-size-all-mem-tables`, and `rocksdb.size-all-mem-tables` called the method `MemTable::ApproximateMemoryUsage` for mutable memtables, which is not safe without synchronization. This resulted in data races with memtable inserts. The patch changes the code handling these properties to use `MemTable::ApproximateMemoryUsageFast` instead, which returns a cached value backed by an atomic variable. Two test cases had to be updated for this change. `MemoryTest.MemTableAndTableReadersTotal` was fixed by increasing the value size used so each value ends up in its own memtable, which was the original intention (note: the test has been broken in the sense that the test code didn't consider that memtable sizes below 64 KB get increased to 64 KB by `SanitizeOptions`, and has been passing only by accident). `DBTest.MemoryUsageWithMaxWriteBufferSizeToMaintain` relies on completely up-to-date values and thus was changed to use `ApproximateMemoryUsage` directly instead of going through the DB properties. Note: this should be safe in this case since there's only a single thread involved. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8206 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D27866811 Pulled By: ltamasi fbshipit-source-id: 7bd754d0565e0a65f1f7f0e78ffc093beef79394	4 years ago
Levi Tamasi	cb25bc1128	Update compaction statistics to include the amount of data read from blob files (#8022) ... Summary: The patch does the following: 1) Exposes the amount of data (number of bytes) read from blob files from `BlobFileReader::GetBlob` / `Version::GetBlob`. 2) Tracks the total number and size of blobs read from blob files during a compaction (due to garbage collection or compaction filter usage) in `CompactionIterationStats` and propagates this data to `InternalStats::CompactionStats` / `CompactionJobStats`. 3) Updates the formulae for write amplification calculations to include the amount of data read from blob files. 4) Extends the compaction stats dump with a new column `Rblob(GB)` and a new line containing the total number and size of blob files in the current `Version` to complement the information about the shape and size of the LSM tree that's already there. 5) Updates `CompactionJobStats` so that the number of files and amount of data written by a compaction are broken down per file type (i.e. table/blob file). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8022 Test Plan: Ran `make check` and `db_bench`. Reviewed By: riversand963 Differential Revision: D26801199 Pulled By: ltamasi fbshipit-source-id: 28a5f072048a702643b28cb5971b4099acabbfb2	4 years ago
Levi Tamasi	a46f080cce	Break down the amount of data written during flushes/compactions per file type (#8013) ... Summary: The patch breaks down the "bytes written" (as well as the "number of output files") compaction statistics into two, so the values are logged separately for table files and blob files in the info log, and are shown in separate columns (`Write(GB)` for table files, `Wblob(GB)` for blob files) when the compaction statistics are dumped. This will also come in handy for fixing the write amplification statistics, which currently do not consider the amount of data read from blob files during compaction. (This will be fixed by an upcoming patch.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8013 Test Plan: Ran `make check` and `db_bench`. Reviewed By: riversand963 Differential Revision: D26742156 Pulled By: ltamasi fbshipit-source-id: 31d18ee8f90438b438ca7ed1ea8cbd92114442d5	4 years ago
mrambacher	12f1137355	Add a SystemClock class to capture the time functions of an Env (#7858) ... Summary: Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock. Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock. There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc). Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858 Reviewed By: pdillinger Differential Revision: D26006406 Pulled By: mrambacher fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90	4 years ago
Peter Dillinger	4d1ac19e3d	aggregated-table-properties with GetMapProperty (#7779) ... Summary: So that we can more easily get aggregate live table data such as total filter, index, and data sizes. Also adds ldb support for getting properties Also fixed some missing/inaccurate related comments in db.h For example: $ ./ldb --db=testdb get_property rocksdb.aggregated-table-properties rocksdb.aggregated-table-properties.data_size: 102871 rocksdb.aggregated-table-properties.filter_size: 0 rocksdb.aggregated-table-properties.index_partitions: 0 rocksdb.aggregated-table-properties.index_size: 2232 rocksdb.aggregated-table-properties.num_data_blocks: 100 rocksdb.aggregated-table-properties.num_deletions: 0 rocksdb.aggregated-table-properties.num_entries: 15000 rocksdb.aggregated-table-properties.num_merge_operands: 0 rocksdb.aggregated-table-properties.num_range_deletions: 0 rocksdb.aggregated-table-properties.raw_key_size: 288890 rocksdb.aggregated-table-properties.raw_value_size: 198890 rocksdb.aggregated-table-properties.top_level_index_size: 0 $ ./ldb --db=testdb get_property rocksdb.aggregated-table-properties-at-level1 rocksdb.aggregated-table-properties-at-level1.data_size: 80909 rocksdb.aggregated-table-properties-at-level1.filter_size: 0 rocksdb.aggregated-table-properties-at-level1.index_partitions: 0 rocksdb.aggregated-table-properties-at-level1.index_size: 1787 rocksdb.aggregated-table-properties-at-level1.num_data_blocks: 81 rocksdb.aggregated-table-properties-at-level1.num_deletions: 0 rocksdb.aggregated-table-properties-at-level1.num_entries: 12466 rocksdb.aggregated-table-properties-at-level1.num_merge_operands: 0 rocksdb.aggregated-table-properties-at-level1.num_range_deletions: 0 rocksdb.aggregated-table-properties-at-level1.raw_key_size: 238210 rocksdb.aggregated-table-properties-at-level1.raw_value_size: 163414 rocksdb.aggregated-table-properties-at-level1.top_level_index_size: 0 $ Pull Request resolved: https://github.com/facebook/rocksdb/pull/7779 Test Plan: Added a test to ldb_test.py Reviewed By: jay-zhuang Differential Revision: D25653103 Pulled By: pdillinger fbshipit-source-id: 2905469a08a64dd6b5510cbd7be2e64d3234d6d3	4 years ago
Akanksha Mahajan	20c7d7c58a	Handling misuse of snprintf return value (#7686) ... Summary: Handle misuse of snprintf return value to avoid Out of bound read/write. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7686 Test Plan: make check -j64 Reviewed By: riversand963 Differential Revision: D25030831 Pulled By: akankshamahajan15 fbshipit-source-id: 1a1d181c067c78b94d720323ae00b79566b57cfa	4 years ago
Levi Tamasi	bb69b4ce7f	Fix InternalStats::DumpCFStats (#7666) ... Summary: https://github.com/facebook/rocksdb/pull/7461 accidentally broke `InternalStats::DumpCFStats` by making `DumpCFFileHistogram` overwrite the output of `DumpCFStatsNoFileHistogram` instead of appending to it, resulting in only the file histogram related information getting logged. The patch fixes this by reverting to appending in `DumpCFFileHistogram`. Fixes https://github.com/facebook/rocksdb/issues/7664 . Pull Request resolved: https://github.com/facebook/rocksdb/pull/7666 Test Plan: Ran `make check` and checked the info log of `db_bench`. Reviewed By: riversand963 Differential Revision: D24929051 Pulled By: ltamasi fbshipit-source-id: 636a3d5ebb5ce23de4f3fe4f03ad3f16cb2858f8	4 years ago
Levi Tamasi	22655a398b	Introduce a blob file reader class (#7461) ... Summary: The patch adds a class called `BlobFileReader` that can be used to retrieve blobs using the information available in blob references (e.g. blob file number, offset, and size). This will come in handy when implementing blob support for `Get`, `MultiGet`, and iterators, and also for compaction/garbage collection. When a `BlobFileReader` object is created (using the factory method `Create`), it first checks whether the specified file is potentially valid by comparing the file size against the combined size of the blob file header and footer (files smaller than the threshold are considered malformed). Then, it opens the file, and reads and verifies the header and footer. The verification involves magic number/CRC checks as well as checking for unexpected header/footer fields, e.g. incorrect column family ID or TTL blob files. Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression type passed by the caller (because of the presence of the header and footer, the specified offset cannot be too close to the start/end of the file; also, the compression type has to match the one in the blob file header), and retrieves and potentially verifies and uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set, `BlobFileReader` reads the blob record header as well (as opposed to just the blob itself) and verifies the key/value size, the key itself, as well as the CRC of the blob record header and the key/value pair. In addition, the patch exposes the compression type from `BlobIndex` (both using an accessor and via `DebugString`), and adds a blob file read latency histogram to `InternalStats` that can be used with `BlobFileReader`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D23999219 Pulled By: ltamasi fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e	4 years ago
mrambacher	7d472accdc	Bring the Configurable options together (#5753) ... Summary: This PR merges the functionality of making the ColumnFamilyOptions, TableFactory, and DBOptions into Configurable into a single PR, resolving any merge conflicts Pull Request resolved: https://github.com/facebook/rocksdb/pull/5753 Reviewed By: ajkr Differential Revision: D23385030 Pulled By: zhichao-cao fbshipit-source-id: 8b977a7731556230b9b8c5a081b98e49ee4f160a	4 years ago
Yanqin Jin	e66199d848	First step towards handling MANIFEST write error (#6949) ... Summary: This PR provides preliminary support for handling IO error during MANIFEST write. File write/sync is not guaranteed to be atomic. If we encounter an IOError while writing/syncing to the MANIFEST file, we cannot be sure about the state of the MANIFEST file. The version edits may or may not have reached the file. During cleanup, if we delete the newly-generated SST files referenced by the pending version edit(s), but the version edit(s) actually are persistent in the MANIFEST, then next recovery attempt will process the version edits(s) and then fail since the SST files have already been deleted. One approach is to truncate the MANIFEST after write/sync error, so that it is safe to delete the SST files. However, file truncation may not be supported on certain file systems. Therefore, we take the following approach. If an IOError is detected during MANIFEST write/sync, we disable file deletions for the faulty database. Depending on whether the IOError is retryable (set by underlying file system), either RocksDB or application can call `DB::Resume()`, or simply shutdown and restart. During `Resume()`, RocksDB will try to switch to a new MANIFEST and write all existing in-memory version storage in the new file. If this succeeds, then RocksDB may proceed. If all recovery is completed, then file deletions will be re-enabled. Note that multiple threads can call `LogAndApply()` at the same time, though only one of them will be going through the process MANIFEST write, possibly batching the version edits of other threads. When the leading MANIFEST writer finishes, all of the MANIFEST writing threads in this batch will have the same IOError. They will all call `ErrorHandler::SetBGError()` in which file deletion will be disabled. Possible future directions: - Add an `ErrorContext` structure so that it is easier to pass more info to `ErrorHandler`. Currently, as in this example, a new `BackgroundErrorReason` has to be added. Test plan (dev server): make check Pull Request resolved: https://github.com/facebook/rocksdb/pull/6949 Reviewed By: anand1976 Differential Revision: D22026020 Pulled By: riversand963 fbshipit-source-id: f3c68a2ef45d9b505d0d625c7c5e0c88495b91c8	4 years ago
sdong	fdf882ded2	Replace namespace name "rocksdb" with ROCKSDB_NAMESPACE (#6433) ... Summary: When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433 Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag. Differential Revision: D19977691 fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e	5 years ago
Yanqin Jin	cfd9732f65	Remove inaccurate code comment (#6274) ... Summary: Remove a comment. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6274 Differential Revision: D19323151 Pulled By: riversand963 fbshipit-source-id: d0d804d6882edcd94e35544ef45578b32ff1caae	5 years ago
Connor1996	3e26a94ba1	Add oldest snapshot sequence property (#6228) ... Summary: Add oldest snapshot sequence property, so we can use `db.GetProperty("rocksdb.oldest-snapshot-sequence")` to get the sequence number of the oldest snapshot. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6228 Differential Revision: D19264145 Pulled By: maysamyabandeh fbshipit-source-id: 67fbe5304d89cbc475bd404e30d1299f7b11c010	5 years ago
sdong	e8263dbdaa	Apply formatter to recent 200+ commits. (#5830) ... Summary: Further apply formatter to more recent commits. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5830 Test Plan: Run all existing tests. Differential Revision: D17488031 fbshipit-source-id: 137458fd94d56dd271b8b40c522b03036943a2ab	5 years ago
sdong	adbc25a4c8	Rename InternalDBStatsType enum names (#5779) ... Summary: When building with clang 9, warning is reported for InternalDBStatsType type names shadowed the one for statistics. Rename them. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5779 Test Plan: Build with clang 9 and see it passes. Differential Revision: D17239378 fbshipit-source-id: af28fb42066c738cd1b841f9fe21ab4671dafd18	5 years ago
Zhongyi Xie	d68f9f4580	simplify include directive involving inttypes (#5402) ... Summary: When using `PRIu64` type of printf specifier, current code base does the following: ``` #ifndef __STDC_FORMAT_MACROS #define __STDC_FORMAT_MACROS #endif #include <inttypes.h> ``` However, this can be simplified to ``` #include <cinttypes> ``` as long as flag `-std=c++11` is used. This should solve issues like https://github.com/facebook/rocksdb/issues/5159 Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402 Differential Revision: D15701195 Pulled By: miasantreble fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03	6 years ago
Vijay Nadimpalli	49c5a12dbe	Organizing rocksdb/db directory ... Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/5390 Differential Revision: D15579388 Pulled By: vjnadimpalli fbshipit-source-id: 5bfc95e31554b8ff05b97b76d6534113f527f366	6 years ago
Vijay Nadimpalli	50e470791d	Organizing rocksdb/table directory by format ... Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/5373 Differential Revision: D15559425 Pulled By: vjnadimpalli fbshipit-source-id: 5d6d6d615582bedd96a4b879bb25d429a6de8b55	6 years ago
Fosco Marotto	6c2bf9e916	Add copyright headers per FB open-source checkup tool. (#5199) ... Summary: internal task: T35568575 Pull Request resolved: https://github.com/facebook/rocksdb/pull/5199 Differential Revision: D14962794 Pulled By: gfosco fbshipit-source-id: 93838ede6d0235eaecff90d200faed9a8515bbbe	6 years ago
Zhongyi Xie	a291f3a1e5	Collect compaction stats by priority and dump to info LOG (#5050) ... Summary: In order to better understand compaction done by different priority thread pool, we now collect compaction stats by priority and also print them to info LOG through stats dump. ``` ** Compaction Stats [default] ** Priority Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Low 0/0 0.00 KB 0.0 16.8 11.3 5.5 5.6 0.1 0.0 0.0 406.4 136.1 42.24 34.96 45 0.939 13M 8865K High 0/0 0.00 KB 0.0 0.0 0.0 0.0 11.4 11.4 0.0 0.0 0.0 76.2 153.00 35.74 12185 0.013 0 0 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/5050 Differential Revision: D14408583 Pulled By: miasantreble fbshipit-source-id: e53746586ea27cb8abc9fec35805bd80ed30f608	6 years ago
Alexander Zinoviev	32a6dd9a41	Add a new CPU time counter to compaction report (#4889) ... Summary: Measure CPU time consumed for a compaction and report it in the stats report Enable NowCPUNanos() to work for MacOS Pull Request resolved: https://github.com/facebook/rocksdb/pull/4889 Differential Revision: D13701276 Pulled By: zinoale fbshipit-source-id: 5024e5bbccd4dd10fd90d947870237f436445055	6 years ago
Andrew Kryczka	fffac43cfb	Add DB property for SST files kept from deletion (#4618) ... Summary: This property can help debug why SST files aren't being deleted. Previously we only had the property "rocksdb.is-file-deletions-enabled". However, even when that returned true, obsolete SSTs may still not be deleted due to the coarse-grained mechanism we use to prevent newly created SSTs from being accidentally deleted. That coarse-grained mechanism uses a lower bound file number for SSTs that should not be deleted, and this property exposes that lower bound. Pull Request resolved: https://github.com/facebook/rocksdb/pull/4618 Differential Revision: D12898179 Pulled By: ajkr fbshipit-source-id: fe68acc041ddbcc9276bbd48976524d95aafc776	6 years ago
zhichao-cao	3fbc865cd5	Add kOptionsStatistics to GetProperty() (#3966) ... Summary: Add a new DB property to DB::GetProperty(), which returns the option.statistics. Test is updated to pass. Closes https://github.com/facebook/rocksdb/pull/3966 Differential Revision: D8311139 Pulled By: zhichao-cao fbshipit-source-id: ea78f4727358c807b0e5a0ea62e09defb10ad9ac	7 years ago
奏之章	1c1bafa668	Fix VersionStorageInfo::EstimateLiveDataSize seg fault ... Summary: `HandleEstimateLiveDataSize`'s `need_out_of_mutex` is true 402b7aa07f/db/internal_stats.cc (L412-L413) so , is will ref a `SuperVersion` 402b7aa07f/db/db_impl.cc (L1896-L1908) so , the param `version` of `InternalStats::HandleEstimateLiveDataSize` is safe , but `cfd_->current()` is not safe ! 402b7aa07f/db/internal_stats.cc (L790-L795) the `cfd_->current()` maybe invalid ... here's mongo-rocks crash backtrace ``` mongod(mongo::printStackTrace(std::basic_ostream<char, std::char_traits<char> >&)+0x41) [0x7fe3a3137c51] mongod(+0x2152E89) [0x7fe3a3136e89] mongod(+0x21534F6) [0x7fe3a31374f6] libpthread.so.0(+0xF5E0) [0x7fe39f5e45e0] mongod(rocksdb::InternalKeyComparator::Compare(rocksdb::Slice const&, rocksdb::Slice const&) const+0x17) [0x7fe3a22375a7] mongod(rocksdb::VersionStorageInfo::EstimateLiveDataSize() const+0x3AA) [0x7fe3a228daba] mongod(rocksdb::InternalStats::HandleEstimateLiveDataSize(unsigned long*, rocksdb::DBImpl*, rocksdb::Version*)+0x20) [0x7fe3a2250d70] mongod(rocksdb::DBImpl::GetIntPropertyInternal(rocksdb::ColumnFamilyData*, rocksdb::DBPropertyInfo const&, bool, unsigned long*)+0xEF) [0x7fe3a21e3dbf] ``` Closes https://github.com/facebook/rocksdb/pull/3912 Differential Revision: D8179944 Pulled By: yiwu-arbug fbshipit-source-id: 26f314a8f98f4c2dc4348745d759f26f0e8d95e1	7 years ago
Maysam Yabandeh	171f415b30	Rename vars to satisfy unity built ... Summary: Tested by "make unity_test" Closes https://github.com/facebook/rocksdb/pull/3807 Differential Revision: D7882657 Pulled By: maysamyabandeh fbshipit-source-id: 84862c18d7f2fc762bd96ad070eaeb6936e45159	7 years ago
Yi Wu	ad511684b2	Add block cache related DB properties ... Summary: Add DB properties "rocksdb.block-cache-capacity", "rocksdb.block-cache-usage", "rocksdb.block-cache-pinned-usage" to show block cache usage. Closes https://github.com/facebook/rocksdb/pull/3734 Differential Revision: D7657180 Pulled By: yiwu-arbug fbshipit-source-id: dd34a019d5878dab539c51ee82669e97b2b745fd	7 years ago
David Lai	3be9b36453	comment unused parameters to turn on -Wunused-parameter flag ... Summary: This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557. Closes https://github.com/facebook/rocksdb/pull/3662 Differential Revision: D7426121 Pulled By: Dayvedde fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352	7 years ago
Yanqin Jin	d42bd041c5	Improve visibility into the reasons for compaction. ... Summary: Add `compaction_reason` as part of event log for event `compaction started`. Add counters for each `CompactionReason`. Closes https://github.com/facebook/rocksdb/pull/3679 Differential Revision: D7550348 Pulled By: riversand963 fbshipit-source-id: a19cff3a678c785aa5ef41aac78b9a5968fcc34d	7 years ago