Summary:
Changes the API of the MemPurge process: the `bool experimental_allow_mempurge` and `experimental_mempurge_policy` flags have been replaced by a `double experimental_mempurge_threshold` option.
This change of API reflects another major change introduced in this PR: the MemPurgeDecider() function now works by sampling the memtables being flushed to estimate the overall amount of useful payload (payload minus the garbage), and then compare this useful payload estimate with the `double experimental_mempurge_threshold` value.
Therefore, when the value of this flag is `0.0` (default value), mempurge is simply deactivated. On the other hand, a value of `DBL_MAX` would be equivalent to always going through a mempurge regardless of the garbage ratio estimate.
At the moment, a `double experimental_mempurge_threshold` value else than 0.0 or `DBL_MAX` is opnly supported`with the `SkipList` memtable representation.
Regarding the sampling, this PR includes the introduction of a `MemTable::UniqueRandomSample` function that collects (approximately) random entries from the memtable by using the new `SkipList::Iterator::RandomSeek()` under the hood, or by iterating through each memtable entry, depending on the target sample size and the total number of entries.
The unit tests have been readapted to support this new API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8628
Reviewed By: pdillinger
Differential Revision: D30149315
Pulled By: bjlemaire
fbshipit-source-id: 1feef5390c95db6f4480ab4434716533d3947f27
Summary:
PR https://github.com/facebook/rocksdb/issues/5908 added `flush_jobs_info_` to `FlushJob` to make sure
`OnFlushCompleted()` is called after committing flush results to
MANIFEST. However, `flush_jobs_info_` is not updated in atomic
flush, causing `NotifyOnFlushCompleted()` to skip `OnFlushCompleted()`.
This PR fixes this, in a similar way to https://github.com/facebook/rocksdb/issues/5908 that handles regular flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8585
Test Plan: make check
Reviewed By: jay-zhuang
Differential Revision: D29913720
Pulled By: riversand963
fbshipit-source-id: 4ff023c98372fa2c93188d4a5c8a4e9ffa0f4dda
Summary:
The db_stress crash was caused by a call to `IsFlushPending()` made by a stats function which triggered an `assert([false])`, which I didn't plan when I created the `trigger_flush` bool. It turns out that this bool variable is not useful: I created it because I thought the `imm_flush_needed` atomic bool would actually trigger a flush.
It turns out that this bool is only checked in `IsFlushPending` - this is its only use - and a flush is triggered by either a background thread checking on the imm array, or by an explicit call to `SchedulePendingFlush` which creates a flush request, that is then added to a flush request queue.
In this PR, I reverted the MemtableList::Add function to what it was before my changes.
I tested the fix by running the exact command line that deterministically triggered the assert error (see below), which confirmed that this is where the error was coming from.
I also run `db_crashtest.py whitebox` and `blackbox` for a couple hours locally before committing this PR.
Experiment run:
```./db_stress --acquire_snapshot_one_in=0 --allow_concurrent_memtable_write=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=1 --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=76.90653425292307 --bottommost_compression_type=disable --cache_index_and_filter_blocks=1 --cache_size=1048576 --checkpoint_one_in=1000000 --checksum_type=kCRC32c --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=1000000 --compact_range_one_in=0 --compaction_ttl=2 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 --compression_type=zstd --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --db=/dev/shm/rocksdb/rocksdb_crashtest_blackbox --db_write_buffer_size=0 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --enable_compaction_filter=1 --enable_pipelined_write=0 --expected_values_path=/dev/shm/rocksdb/rocksdb_crashtest_expected --experimental_allow_mempurge=1 --experimental_mempurge_policy=kAlternate --fail_if_options_file_error=1 --file_checksum_impl=none --flush_one_in=1000000 --format_version=2 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=14 --index_type=0 --iterpercent=0 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=False --long_running_snapshots=1 --mark_for_compaction_one_file_in=10 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=100000000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtablerep=skip_list --mmap_read=0 --mock_direct_io=True --nooverwritepercent=1 --open_files=-1 --open_metadata_write_fault_one_in=8 --open_read_fault_one_in=32 --open_write_fault_one_in=16 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=0 --partition_filters=0 --partition_pinning=0 --pause_background_one_in=1000000 --periodic_compaction_seconds=1000 --prefix_size=-1 --prefixpercent=0 --progress_reports=0 --read_fault_one_in=0 --readpercent=60 --recycle_log_file_num=1 --reopen=20 --set_options_one_in=0 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=0 --subcompactions=3 --sync=1 --sync_fault_injection=False --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=1 --unpartitioned_pinning=3 --use_clock_cache=0 --use_direct_io_for_flush_and_compaction=1 --use_direct_reads=0 --use_full_merge_v1=1 --use_merge=0 --use_multiget=0 --use_ribbon_filter=1 --user_timestamp_size=0 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --write_buffer_size=33554432 --write_dbid_to_manifest=1 --writepercent=35```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8604
Reviewed By: pdillinger
Differential Revision: D30047295
Pulled By: bjlemaire
fbshipit-source-id: b9e379bfa3d6b9bd2b275725fb0bca4bd81a3dbe
Summary:
Add `experimental_mempurge_policy` option flag and introduce two new `MemPurge` (Memtable Garbage Collection) policies: 'ALWAYS' and 'ALTERNATE'. Default value: ALTERNATE.
`ALWAYS`: every flush will first go through a `MemPurge` process. If the output is too big to fit into a single memtable, then the mempurge is aborted and a regular flush process carries on. `ALWAYS` is designed for user that need to reduce the number of L0 SST file created to a strict minimum, and can afford a small dent in performance (possibly hits to CPU usage, read efficiency, and maximum burst write throughput).
`ALTERNATE`: a flush is transformed into a `MemPurge` except if one of the memtables being flushed is the product of a previous `MemPurge`. `ALTERNATE` is a good tradeoff between reduction in number of L0 SST files created and performance. `ALTERNATE` perform particularly well for completely random garbage ratios, or garbage ratios anywhere in (0%,50%], and even higher when there is a wild variability in garbage ratios.
This PR also includes support for `experimental_mempurge_policy` in `db_bench`.
Testing was done locally by replacing all the `MemPurge` policies of the unit tests with `ALTERNATE`, as well as local testing with `db_crashtest.py` `whitebox` and `blackbox`. Overall, if an `ALWAYS` mempurge policy passes the tests, there is no reasons why an `ALTERNATE` policy would fail, and therefore the mempurge policy was set to `ALWAYS` for all mempurge unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8583
Reviewed By: pdillinger
Differential Revision: D29888050
Pulled By: bjlemaire
fbshipit-source-id: e2cf26646d66679f6f5fb29842624615610759c1
Summary:
The main challenge to make the memtable garbage collection prototype (nicknamed `mempurge`) was to not get rid of WAL files that contain unflushed (but mempurged) data. That was successfully guaranteed by not writing the VersionEdit to the MANIFEST file after a successful mempurge.
By not writing VersionEdits to the `MANIFEST` file after a succesful mempurge operation, we do not change the earliest log file number that contains unflushed data: `cfd->GetLogNumber()` (`cfd->SetLogNumber()` is only called in `VersionSet::ProcessManifestWrites`). As a result, a number of functions introduced earlier just for the mempurge operation are not obscolete/redundant. (e.g.: `FlushJob::ExtractEarliestLogFileNumber`), and this PR aims at cleaning up all these now-unnecessary functions. In particular, we no longer need to store the earliest log file number in the `MemTable` struct itself. This PR therefore also reverts the `MemTable` struct to its original form.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8558
Test Plan: Already included in `db_flush_test.cc`.
Reviewed By: anand1976
Differential Revision: D29764351
Pulled By: bjlemaire
fbshipit-source-id: 0f43b260fa270251862512f397d3f24ee62e8437
Summary:
In this PR, `mempurge` is made compatible with the Write Ahead Log: in case of recovery, the DB is now capable of recovering the data that was "mempurged" and kept in the `imm()` list of immutable memtables.
The twist was to add a uint64_t to the `memtable` struct to store the number of the earliest log file containing entries from the `memtable`. When a `Flush` operation is replaced with a `MemPurge`, the `VersionEdit` (which usually contains the new min log file number to pick up for recovery and the level 0 file path of the newly created SST file) is no longer appended to the manifest log, and every time the `deleteWal` method is called, a check is made on the list of immutable memtables.
This PR also includes a unit test that verifies that no data is lost upon Reopening of the database when the mempurge feature is activated. This extensive unit test includes two column families, with valid data contained in the imm() at time of "crash"/reopening (recovery).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8528
Reviewed By: pdillinger
Differential Revision: D29701097
Pulled By: bjlemaire
fbshipit-source-id: 072a900fb6ccc1edcf5eef6caf88f3060238edf9
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
Summary:
The patch adds initial support for reading blobs to the batched `MultiGet` API.
The current implementation simply retrieves the blob values as the blob indexes
are encountered; that is, reads from blob files are currently not batched. (This
will be optimized in a separate phase.) In addition, the patch removes some dead
code related to BlobDB from the batched `MultiGet` implementation, namely the
`is_blob` / `is_blob_index` flags that are passed around in `DBImpl` and `MemTable` /
`MemTableListVersion`. These were never hooked up to anything and wouldn't
work anyways, since a single flag is not sufficient to communicate the "blobness"
of multiple key-values.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7766
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D25479290
Pulled By: ltamasi
fbshipit-source-id: 7aba2d290e31876ee592bcf1adfd1018713a8000
Summary:
When 2 phase commit is enabled, if there are prepared data in a WAL, the WAL should be kept, the minimum log number for such a WAL is written to MANIFEST during flush. In atomic flush, such information is not written to MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7570
Test Plan: Added a new unit test `DBAtomicFlushTest.ManualFlushUnder2PC`, this test fails in atomic flush without this PR, after this PR, it succeeds.
Reviewed By: riversand963
Differential Revision: D24394222
Pulled By: cheng-chang
fbshipit-source-id: 60ce74b21b704804943be40c8de01b41269cf116
Summary:
https://github.com/facebook/rocksdb/issues/7340 reports and reproduces an assertion failure caused by a combination of the following:
- atomic flush is disabled.
- a column family can appear multiple times in the flush queue at the same time. This behavior was introduced in release 5.17.
Consequently, it is possible that two flushes race with each other. One bg flush thread flushes all memtables. The other thread calls `FlushMemTableToOutputFile()` afterwards, and hits the assertion error below.
```
assert(cfd->imm()->NumNotFlushed() != 0);
assert(cfd->imm()->IsFlushPending());
```
Fix this by reverting the behavior. In non-atomic-flush case, a column family can appear in the flush queue at most once at the same time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7362
Test Plan:
make check
Also run stress test successfully for 10 times.
```
make crash_test
```
Reviewed By: ajkr
Differential Revision: D25172996
Pulled By: riversand963
fbshipit-source-id: f1559b6366cc609e961e3fc83fae548f1fad08ce
Summary:
Currently, the following interleaving of events can lead to SuperVersion containing both immutable memtables as well as the resulting L0. This can cause Get to return incorrect result if there are merge operands. This may also affect other operations such as single deletes.
```
time main_thr bg_flush_thr bg_compact_thr compact_thr set_opts_thr
0 | WriteManifest:0
1 | issue compact
2 | wait
3 | Merge(counter)
4 | issue flush
5 | wait
6 | WriteManifest:1
7 | wake up
8 | write manifest
9 | wake up
10 | Get(counter)
11 | remove imm
V
```
The reason behind is that: one bg flush thread's installing new `Version` can be batched and performed by another thread that is the "leader" MANIFEST writer. This bg thread removes the memtables from current super version only after `LogAndApply` returns. After the leader MANIFEST writer signals (releasing mutex) this bg flush thread, it is possible that another thread sees this cf with both memtables (whose data have been flushed to the newest L0) and the L0 before this bg flush thread removes the memtables.
To address this issue, each bg flush thread can pass a callback function to `LogAndApply`. The callback is responsible for removing the memtables. Therefore, the leader MANIFEST writer can call this callback and remove the memtables before releasing the mutex.
Test plan (devserver)
```
$make merge_test
$./merge_test --gtest_filter=MergeTest.MergeWithCompactionAndFlush
$make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6069
Reviewed By: cheng-chang
Differential Revision: D18790894
Pulled By: riversand963
fbshipit-source-id: e41bd600c0448b4f4b2deb3f7677f95e3076b4ed
Summary:
When a memtable is trimmed in MemTableListVersion, the memtable
is only added to delete list if it is
the last reference. However it is not the last reference as it is held
by the super version. But the super version would not be switched if the
delete list is empty. So the memtable is never destroyed and memory
usage increases beyond write_buffer_size +
max_write_buffer_size_to_maintain.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7296
Test Plan:
1. ./db_bench -benchmarks=randomtransaction
-optimistic_transaction_db=1 -statistics -stats_interval_seconds=1
-duration=90 -num=500000 --max_write_buffer_size_to_maintain=16000000
--transaction_set_snapshot
Reviewed By: ltamasi
Differential Revision: D23267395
Pulled By: akankshamahajan15
fbshipit-source-id: 3a8d437fe9f4015f851ff84c0e29528aa946b650
Summary:
Confusing checks for null that are never null
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6933
Test Plan: make check
Reviewed By: cheng-chang
Differential Revision: D21885466
Pulled By: pdillinger
fbshipit-source-id: 4b48e03c2a33727f2702b0d12292f9fda5a3c475
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.
The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487
Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check
Reviewed By: anand1976
Differential Revision: D20685017
Pulled By: zhichao-cao
fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
Summary:
In the current code base, we can use Directory from Env to manage directory (e.g, Fsync()). The PR https://github.com/facebook/rocksdb/issues/5761 introduce the File System as a new Env API. So we further replace the Directory class in DB with FSDirectory such that we can have more IO information from IOStatus returned by FSDirectory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6468
Test Plan: pass make asan_check
Differential Revision: D20195261
Pulled By: zhichao-cao
fbshipit-source-id: 93962cb9436852bfcfb76e086d9e7babd461cbe1
Summary:
Added new Get() methods that return timestamp. Dummy implementation is given so that classes derived from DB don't need to be touched to provide their implementation. MultiGet is not included.
ReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks.
base line (commit 72ee067b9):
101.712 micros/op 314602 ops/sec; 36.0 MB/s (5658999 of 5658999 found)
This PR:
100.288 micros/op 319071 ops/sec; 36.5 MB/s (5674999 of 5674999 found)
./db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=readrandom --use_existing_db=1 --num=25000000 --threads=32
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6409
Differential Revision: D20200086
Pulled By: riversand963
fbshipit-source-id: 490edd74d924f62bd8ae9c29c2a6bbbb8410ca50
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
https://github.com/facebook/rocksdb/pull/6177 introduced a data race
involving `MemTableList::InstallNewVersion` and `MemTableList::NumFlushed`.
The patch fixes this by caching whether the current version has any
memtable history (i.e. flushed memtables that are kept around for
transaction conflict checking) in an `std::atomic<bool>` member called
`current_has_history_`, similarly to how `current_memory_usage_excluding_last_`
is handled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6187
Test Plan:
```
make clean
COMPILE_WITH_TSAN=1 make db_test -j24
./db_test
```
Differential Revision: D19084059
Pulled By: ltamasi
fbshipit-source-id: 327a5af9700fb7102baea2cc8903c085f69543b9
Summary:
We have observed an increase in CPU load caused by frequent calls to
`ColumnFamilyData::InstallSuperVersion` from `DBImpl::TrimMemtableHistory`
when using `max_write_buffer_size_to_maintain` to limit the amount of
memtable history maintained for transaction conflict checking. Part of the issue
is that trimming can potentially be scheduled even if there is no memtable
history. The patch adds a check that fixes this.
See also https://github.com/facebook/rocksdb/pull/6169.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6177
Test Plan:
Compared `perf` output for
```
./db_bench -benchmarks=randomtransaction -optimistic_transaction_db=1 -statistics -stats_interval_seconds=1 -duration=90 -num=500000 --max_write_buffer_size_to_maintain=16000000 --transaction_set_snapshot=1 --threads=32
```
before and after the change. There is a significant reduction for the call chain
`rocksdb::DBImpl::TrimMemtableHistory` -> `rocksdb::ColumnFamilyData::InstallSuperVersion` ->
`rocksdb::ThreadLocalPtr::StaticMeta::Scrape` even without https://github.com/facebook/rocksdb/pull/6169.
Differential Revision: D19057445
Pulled By: ltamasi
fbshipit-source-id: dff81882d7b280e17eda7d9b072a2d4882c50f79
Summary:
When there are concurrent flush job on the same CF, `OnFlushCompleted` can be called before the flush result being install to LSM. Fixing the issue by passing `FlushJobInfo` through `MemTable`, and the thread who commit the flush result can fetch the `FlushJobInfo` and fire `OnFlushCompleted` on behave of the thread actually writing the SST.
Fix https://github.com/facebook/rocksdb/issues/5892
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5908
Test Plan: Add new test. The test will fail without the fix.
Differential Revision: D17916144
Pulled By: riversand963
fbshipit-source-id: e18df67d9533b5baee52ae3605026cdeb05cbe10
Summary:
RocksDB has a MultiGet() API that implements batched key lookup for higher performance (https://github.com/facebook/rocksdb/blob/master/include/rocksdb/db.h#L468). Currently, batching is implemented in BlockBasedTableReader::MultiGet() for SST file lookups. One of the ways it improves performance is by pipelining bloom filter lookups (by prefetching required cachelines for all the keys in the batch, and then doing the probe) and thus hiding the cache miss latency. The same concept can be extended to the memtable as well. This PR involves implementing a pipelined bloom filter lookup in DynamicBloom, and implementing MemTable::MultiGet() that can leverage it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5818
Test Plan:
Existing tests
Performance Test:
Ran the below command which fills up the memtable and makes sure there are no flushes and then call multiget. Ran it on master and on the new change and see atleast 1% performance improvement across all the test runs I did. Sometimes the improvement was upto 5%.
TEST_TMPDIR=/data/users/$USER/benchmarks/feature/ numactl -C 10 ./db_bench -benchmarks="fillseq,multireadrandom" -num=600000 -compression_type="none" -level_compaction_dynamic_level_bytes -write_buffer_size=200000000 -target_file_size_base=200000000 -max_bytes_for_level_base=16777216 -reads=90000 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4 -statistics -memtable_whole_key_filtering=true -memtable_bloom_size_ratio=10
Differential Revision: D17578869
Pulled By: vjnadimpalli
fbshipit-source-id: 23dc651d9bf49db11d22375bf435708875a1f192
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
const ReadOptions& options, ColumnFamilyHandle* column_family,
const Slice& key, PinnableSlice* merge_operands,
GetMergeOperandsOptions* get_merge_operands_options,
int* number_of_operands)
Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);
Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604
Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist
Differential Revision: D16657366
Pulled By: vjnadimpalli
fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
util/ means for lower level libraries, so it's a good idea to move the files which requires knowledge to DB out. Create a file/ and move some files there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5375
Differential Revision: D15550935
Pulled By: siying
fbshipit-source-id: 61a9715dcde5386eebfb43e93f847bba1ae0d3f2
Summary:
RocksDB secondary can replay both MANIFEST and WAL now.
On the one hand, the memory usage by memtables will grow after replaying WAL for sometime. On the other hand, replaying the MANIFEST can bring the database persistent data to a more recent point in time, giving us the opportunity to discard some memtables containing out-dated data.
This PR coordinates the MANIFEST and WAL replay, using the updates from MANIFEST replay to update the active memtable and immutable memtable list of each column family.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5305
Differential Revision: D15386512
Pulled By: riversand963
fbshipit-source-id: a3ea6fc415f8382d8cf624f52a71ebdcffa3e355
Summary:
1. this commit fixes our handling of a combination of two separate edge
cases. If a flush job does not pick any memtable to flush (because another
flush job has already picked the same memtables), and the column family
assigned to the flush job is dropped right before RocksDB calls
rocksdb::InstallMemtableAtomicFlushResults, our original code passes
a FileMetaData object whose file number is 0, failing the assertion in
rocksdb::InstallMemtableAtomicFlushResults (assert(m->GetFileNumber() > 0)).
2. Also piggyback a small change: since we already create a local copy of column family's mutable CF options to eliminate potential race condition with `SetOptions` call, we might as well use the local copy in other function calls in the same scope.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4932
Differential Revision: D13901322
Pulled By: riversand963
fbshipit-source-id: b936580af7c127ea0c6c19ea10cd5fcede9fb0f9
Summary:
as titled.
Since different bg flush threads can flush different sets of column families
(due to column family creation and drop), we decide not to let one thread
perform atomic flush result installation for other threads. Bg flush threads
will install their atomic flush results sequentially to MANIFEST, using
a conditional variable, i.e. atomic_flush_install_cv_ to coordinate.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4791
Differential Revision: D13498930
Pulled By: riversand963
fbshipit-source-id: dd7482fc41f4bd22dad1e1ef7d4764ef424688d7
Summary:
Now that v2 is fully functional, the v1 aggregator is removed.
The v2 aggregator has been renamed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4778
Differential Revision: D13495930
Pulled By: abhimadan
fbshipit-source-id: 9d69500a60a283e79b6c4fa938fc68a8aa4d40d6
Summary:
Removed `one_time_use` flag, which removed the need for some
tests, and changed all `NewRangeTombstoneIterator` methods to return
`FragmentedRangeTombstoneIterators`.
These changes also led to removing `RangeDelAggregatorV2::AddUnfragmentedTombstones`
and one of the `MemTableListVersion::AddRangeTombstoneIterators` methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4692
Differential Revision: D13106570
Pulled By: abhimadan
fbshipit-source-id: cbab5432d7fc2d9cdfd8d9d40361a1bffaa8f845
Summary:
The old RangeDelAggregator did expensive pre-processing work
to create a collapsed, binary-searchable representation of range
tombstones. With FragmentedRangeTombstoneIterator, much of this work is
now unnecessary. RangeDelAggregatorV2 takes advantage of this by seeking
in each iterator to find a covering tombstone in ShouldDelete, while
doing minimal work in AddTombstones. The old RangeDelAggregator is still
used during flush/compaction for now, though RangeDelAggregatorV2 will
support those uses in a future PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4649
Differential Revision: D13146964
Pulled By: abhimadan
fbshipit-source-id: be29a4c020fc440500c137216fcc1cf529571eb3
Summary:
Previously, range tombstones were accumulated from every level, which
was necessary if a range tombstone in a higher level covered a key in a lower
level. However, RangeDelAggregator::AddTombstones's complexity is based on
the number of tombstones that are currently stored in it, which is wasteful in
the Get case, where we only need to know the highest sequence number of range
tombstones that cover the key from higher levels, and compute the highest covering
sequence number at the current level. This change introduces this optimization, and
removes the use of RangeDelAggregator from the Get path.
In the benchmark results, the following command was used to initialize the database:
```
./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8
```
...and the following command was used to measure read throughput:
```
./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32
```
The filluniquerandom command was only run once, and the resulting database was used
to measure read performance before and after the PR. Both binaries were compiled with
`DEBUG_LEVEL=0`.
Readrandom results before PR:
```
readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found)
```
Readrandom results after PR:
```
readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found)
```
So it's actually slower right now, but this PR paves the way for future optimizations (see #4493).
----
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449
Differential Revision: D10370575
Pulled By: abhimadan
fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
Summary:
Leverage existing `FlushJob` to implement atomic flush of multiple column families.
This PR depends on other PRs and is a subset of #3752 . This PR itself is not sufficient in fulfilling atomic flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4262
Differential Revision: D9283109
Pulled By: riversand963
fbshipit-source-id: 65401f913e4160b0a61c0be6cd02adc15dad28ed
Summary:
It also renames InstallMemtableFlushResults to MaybeInstallMemtableFlushResults to clarify its contract.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4464
Differential Revision: D10224918
Pulled By: maysamyabandeh
fbshipit-source-id: 04e3f2d8542002cb9f8010cb436f5152751b3cbe
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
Summary:
Flush() call could be waiting indefinitely if min_write_buffer_number_to_merge is used. Consider the sequence:
1. User call Flush() with flush_options.wait = true
2. The manual flush started in the background
3. New memtable become immutable because of writes. The new memtable will not trigger flush if min_write_buffer_number_to_merge is not reached.
4. The manual flush finish.
Because of the new memtable created at step 3 not being flush, previous logic of WaitForFlushMemTable() keep waiting, despite the memtables it intent to flush has been flushed.
Here instead of checking if there are any more memtables to flush, WaitForFlushMemTable() also check the id of the earliest memtable. If the id is larger than that of latest memtable at the time flush was initiated, it means all the memtable at the time of flush start has all been flush.
Closes https://github.com/facebook/rocksdb/pull/3378
Differential Revision: D6746789
Pulled By: yiwu-arbug
fbshipit-source-id: 35e698f71c7f90b06337a93e6825f4ea3b619bfa
Summary:
With FIFO compaction we would like to get the oldest data time for monitoring. The problem is we don't have timestamp for each key in the DB. As an approximation, we expose the earliest of sst file "creation_time" property.
My plan is to override the property with a more accurate value with blob db, where we actually have timestamp.
Closes https://github.com/facebook/rocksdb/pull/2842
Differential Revision: D5770600
Pulled By: yiwu-arbug
fbshipit-source-id: 03833c8f10bbfbee62f8ea5c0d03c0cafb5d853a
Summary:
Blob db insert blob index to base db as kTypeBlobIndex type, to tell apart values written by plain rocksdb or blob db. This is to make it possible to migrate from existing rocksdb to blob db.
Also with the patch blob db garbage collection get away from OptimisticTransaction. Instead it use a custom write callback to achieve similar behavior as OptimisticTransaction. This is because we need to pass the is_blob_index flag to DBImpl::Get but OptimisticTransaction don't support it.
Closes https://github.com/facebook/rocksdb/pull/3000
Differential Revision: D6050044
Pulled By: yiwu-arbug
fbshipit-source-id: 61dc72ab9977625e75f78cd968e7d8a3976e3632
Summary:
Add kTypeBlobIndex value type, which will be used by blob db only, to insert a (key, blob_offset) KV pair. The purpose is to
1. Make it possible to open existing rocksdb instance as blob db. Existing value will be of kTypeIndex type, while value inserted by blob db will be of kTypeBlobIndex.
2. Make rocksdb able to detect if the db contains value written by blob db, if so return error.
3. Make it possible to have blob db optionally store value in SST file (with kTypeValue type) or as a blob value (with kTypeBlobIndex type).
The root db (DBImpl) basically pretended kTypeBlobIndex are normal value on write. On Get if is_blob is provided, return whether the value read is of kTypeBlobIndex type, or return Status::NotSupported() status if is_blob is not provided. On scan allow_blob flag is pass and if the flag is true, return wether the value is of kTypeBlobIndex type via iter->IsBlob().
Changes on blob db side will be in a separate patch.
Closes https://github.com/facebook/rocksdb/pull/2886
Differential Revision: D5838431
Pulled By: yiwu-arbug
fbshipit-source-id: 3c5306c62bc13bb11abc03422ec5cbcea1203cca
Summary:
This patch instruments the read path to verify each read value against an optional ReadCallback class. If the value is rejected, the reader moves on to the next value. The WritePreparedTxn makes use of this feature to skip sequence numbers that are not in the read snapshot.
Closes https://github.com/facebook/rocksdb/pull/2850
Differential Revision: D5787375
Pulled By: maysamyabandeh
fbshipit-source-id: 49d808b3062ab35e7ae98ad388f659757794184c
Summary:
The range deletion meta-block iterators weren't getting cleaned up properly since they don't support arena allocation. I didn't implement arena support since, in the general case, each iterator is used only once and separately from all other iterators, so there should be no benefit to data locality.
Anyways, this diff fixes up #2370 by treating range deletion iterators as non-arena-allocated.
Closes https://github.com/facebook/rocksdb/pull/2399
Differential Revision: D5171119
Pulled By: ajkr
fbshipit-source-id: bef6f5c4c5905a124f4993945aed4bd86e2807d8
Summary:
Previously we returned NotSupported when ingesting files into a database containing any range deletions. This diff adds the support.
- Flush if any memtable contains range deletions overlapping the to-be-ingested file
- Place to-be-ingested file before any level that contains range deletions overlapping it.
- Added support for `Version` to return iterators over range deletions in a given level. Previously, we piggybacked getting range deletions onto `Version`'s `Get()` / `AddIterator()` functions by passing them a `RangeDelAggregator*`. But file ingestion needs to get iterators over range deletions, not populate an aggregator (since the aggregator does collapsing and doesn't expose the actual ranges).
Closes https://github.com/facebook/rocksdb/pull/2370
Differential Revision: D5127648
Pulled By: ajkr
fbshipit-source-id: 816faeb9708adfa5287962bafdde717db56e3f1a
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
It is confusing to have auto_roll_logger to stay under db/, which has nothing to do with database. Move filename together as it is a dependency.
Closes https://github.com/facebook/rocksdb/pull/2080
Differential Revision: D4821141
Pulled By: siying
fbshipit-source-id: ca7d768
Summary:
Added method that returns approx num of entries as well as size for memtables.
Closes https://github.com/facebook/rocksdb/pull/1841
Differential Revision: D4511990
Pulled By: VitaliyLi
fbshipit-source-id: 9a4576e
Summary:
Consider the following single column family scenario:
prepare in log A
commit in log B
*WAL is too large, flush all CFs to releast log A*
*CFA is on log B so we do not see CFA is depending on log A so no flush is requested*
To fix this we must also consider the log containing the prepare section when determining what log a CF is dependent on.
Closes https://github.com/facebook/rocksdb/pull/1768
Differential Revision: D4403265
Pulled By: reidHoruff
fbshipit-source-id: ce800ff
Baptiste Lemaire