Summary:
The compilers we use treat char as signed. However, this is not guarantee of C standard and some compilers (for ARM platform for example), treat char as unsigned. Code that assumes that char is either signed or unsigned is wrong.
This change explicitly casts the char to signed version. This will not break any of our use cases on x86, which, I believe are all of them. In case somebody out there is using RocksDB on ARM AND using bloom filters, they're going to have a bad time. However, it is very unlikely that this is the case.
Test Plan: sanity test with previous commit (with new sanity test)
Reviewers: yhchiang, ljin, sdong
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D22767
Summary:
Introducing WriteController, which is a source of truth about per-DB write delays. Let's define an DB epoch as a period where there are no flushes and compactions (i.e. new epoch is started when flush or compaction finishes). Each epoch can either:
* proceed with all writes without delay
* delay all writes by fixed time
* stop all writes
The three modes are recomputed at each epoch change (flush, compaction), rather than on every write (which is currently the case).
When we have a lot of column families, our current pull behavior adds a big overhead, since we need to loop over every column family for every write. With new push model, overhead on Write code-path is minimal.
This is just the start. Next step is to also take care of stalls introduced by slow memtable flushes. The final goal is to eliminate function MakeRoomForWrite(), which currently needs to be called for every column family by every write.
Test Plan: make check for now. I'll add some unit tests later. Also, perf test.
Reviewers: dhruba, yhchiang, MarkCallaghan, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22791
Summary:
That way we can see when this graph goes up and be happy.
Couple of changes:
1. title
2. fix db_bench to delete column families before deleting the DB. this was asserting when compiled in debug mode
3. don't sync manifest when disableDataSync. We discussed this offline. I can move it to separate diff if you'd like
Test Plan: ran it
Reviewers: sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22815
Summary: as title
Test Plan: no
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22761
Summary: also fix HISTORY.md
Test Plan: make all check
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22437
Summary:
I will move compression related options in a separate diff since this
diff is already pretty lengthy.
I guess I will also need to change JNI accordingly :(
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21915
Summary:
Add WriteBatchWithIndex so that a user can query data out of a WriteBatch, to support MongoDB's read-its-own-write.
WriteBatchWithIndex uses a skiplist to store the binary index. The index stores the offset of the entry in the write batch. When searching for a key, the key for the entry is read by read the entry from the write batch from the offset.
Define a new iterator class for querying data out of WriteBatchWithIndex. A user can create an iterator of the write batch for one column family, seek to a key and keep calling Next() to see next entries.
I will add more unit tests if people are OK about this API.
Test Plan:
make all check
Add unit tests.
Reviewers: yhchiang, igor, MarkCallaghan, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb, xjin
Differential Revision: https://reviews.facebook.net/D21381
Summary: I was bit by this when developing SpatialDB. In case all files are at level 0, CompactRange() will output the compacted files to level 0. This is not ideal, since read amp. is much better at level 1 and higher.
Test Plan: Compacted data in SpatialDB, read manifest using ldb, verified that files are now at level 1 instead of 0.
Reviewers: sdong, ljin, yhchiang, dhruba
Reviewed By: dhruba
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20901
Summary: We have quite some properties that are integers and we are adding more. Add a function to directly return them as an integer, instead of a string
Test Plan: Add several unit test checks
Reviewers: yhchiang, igor, dhruba, haobo, ljin
Reviewed By: ljin
Subscribers: yoshinorim, leveldb
Differential Revision: https://reviews.facebook.net/D20637
Summary: Add a DB property of estimated number of live keys, by adding number of entries of all mem tables and all files, subtracted by all deletions in all files.
Test Plan: Add the case in unit tests
Reviewers: hobbymanyp, ljin
Reviewed By: ljin
Subscribers: MarkCallaghan, yoshinorim, leveldb, igor, dhruba
Differential Revision: https://reviews.facebook.net/D20631
Summary:
Make StatisticsImpl being able to forward stats to provided statistics
implementation. The main purpose is to allow us to collect internal
stats in the future even when user supplies custom statistics
implementation. It avoids intrumenting 2 sets of stats collection code.
One immediate use case is tuning advisor, which needs to collect some
internal stats, users may not be interested.
Test Plan:
ran db_bench and see stats show up at the end of run
Will run make all check since some tests rely on statistics
Reviewers: yhchiang, sdong, igor
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20145
Summary:
All public headers need to be under `include/rocksdb` directory. Otherwise, clients include our header files like this:
#include <rocksdb/db.h>
#include <utilities/backupable_db.h> // still our public header!
Also, internally, we include:
#include "utilities/backupable/backupable_db.h" // internal header
#include "utilities/backupable_db.h" // public header
which is confusing.
This way, when we install rocksdb as a system library, we can just copy `include/rocksdb` directory to system's header files. We can't really copy `utilities` directory to system's header files.
Test Plan: compiles
Reviewers: dhruba, ljin, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20409
Summary: Updating HISTORY.md to reflect changes in PlainTable index
Test Plan: no need
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20229
Summary:
Since we have a lot of options for PlainTable, add a struct PlainTableOptions
to manage them
Test Plan: make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20175
Summary:
This patch adds a target size parameter in options.db_paths and universal compaction will base it to determine which DB path to place a new file.
Level-style stays the same.
Test Plan: Add new unit tests
Reviewers: ljin, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, dhruba, igor, leveldb
Differential Revision: https://reviews.facebook.net/D19869
Summary:
Seems like NewTotalOrderPlainTableFactory is useless and is semantically incorrect.
Total order mode indicator is prefix_extractor == nullptr,
but NewTotalOrderPlainTableFactory doesn't set it to be nullptr. That's why some tests
in plain_table_db_tests is incorrect.
Test Plan: make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19587
Summary:
Add option and plugin rate limiter for PosixWritableFile. The rate
limiter only applies to flush and compaction. WAL and MANIFEST are
excluded from this enforcement.
Test Plan: db_test
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19425
Summary: Update HISTORY.md to include TimeOut write API and compaction update.
Test Plan: n/a
Reviewers: ljin, sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19449
Summary:
In this patch, we enhance HashLinkList memtable to reduce performance outliers when a bucket contains too many entries. We switch to skip list for this case to enable binary search.
Add threshold_use_skiplist parameter to determine when a bucket needs to switch to skip list.
The new data structure is documented in comments in the codes.
Test Plan:
make all check
set threshold_use_skiplist in several tests
Reviewers: yhchiang, haobo, ljin
Reviewed By: yhchiang, ljin
Subscribers: nkg-, xjin, dhruba, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D19299
Summary:
Add one entry to HISTORY.md that is failed to be added.
Move two other ones to the right location.
Test Plan: Only document
Reviewers: haobo, ljin
Subscribers: dhruba, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D19233
Summary:
As discussed in our internal group, we don't get much use of seek compaction at the moment, while it's making code more complicated and slower in some cases.
This diff removes seek compaction and (hopefully) all code that was introduced to support seek compaction.
There is one test case that relied on didIO information. I'll try to find another way to implement it.
Test Plan: make check
Reviewers: sdong, haobo, yhchiang, ljin, dhruba
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19161
Summary: Add two parameters of hash linked list to log distribution of number of entries across all buckets, and a sample row when there are too many entries in one single bucket.
Test Plan: Turn it on in plain_table_db_test and see the logs.
Reviewers: haobo, ljin
Reviewed By: ljin
Subscribers: leveldb, nkg-, dhruba, yhchiang
Differential Revision: https://reviews.facebook.net/D19095
Summary: The new table factory is used if users want to convert a DB from one table format to the other. A user can use this table to open a DB written using one table format and write new files to another table format.
Test Plan: add a unit test
Reviewers: haobo, igor
Reviewed By: igor
Subscribers: dhruba, ljin, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D19017
Summary:
Introducing new compaction style -- FIFO.
FIFO compaction style has write amplification of 1 (+1 for WAL) and it deletes the oldest files when the total DB size exceeds pre-configured values.
FIFO compaction style is suited for storing high-frequency event logs.
Test Plan: Added a unit test
Reviewers: dhruba, haobo, sdong
Reviewed By: dhruba
Subscribers: alberts, leveldb
Differential Revision: https://reviews.facebook.net/D18765
Summary:
Materialize the hash index to avoid the soaring cpu/flash usage
when initializing the database.
Test Plan: existing unit tests passed
Reviewers: sdong, haobo
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18339
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
Summary:
TLB page allocation errors are now logged to info logs, instead of stderr.
In order to do that, mem table rep's factory functions take a info logger now.
Test Plan: make all check
Reviewers: haobo, igor, yhchiang
Reviewed By: yhchiang
CC: leveldb, yhchiang, dhruba
Differential Revision: https://reviews.facebook.net/D18471
Summary:
also add an override option total_order_iteration if you want to use full
iterator with prefix_extractor
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D17805
Summary: XCode for some reason injects `#define DEBUG 1` into our code, which makes compile fail because we use `DEBUG` keyword for other stuff. This diff fixes the issue by renaming `DEBUG` to `DEBUG_LEVEL`.
Test Plan: compiles
Reviewers: dhruba, haobo, sdong, yhchiang, ljin
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17709
Summary: Update HISTORY.md to make existing items to 2.8 release and add something I think is missing.
Test Plan: N/A
Reviewers: haobo, igor, ljin, dhruba, yhchiang, xjin
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17517
Summary: The previous change D15087 changed existing compaction filter, which makes the commonly used class not backward compatible. Revert the older interface. Use a new interface for V2 instead.
Test Plan: make all check
Reviewers: haobo, yhchiang, igor
CC: danguo, dhruba, ljin, igor, leveldb
Differential Revision: https://reviews.facebook.net/D17223
Summary: Talked to <insert internal project name> folks and they found it really scary that they won't be able to roll back once they upgrade to 2.8. We should fix this.
Test Plan: make check
Reviewers: haobo, ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17343
Summary:
This diff adds a new CompactionFilterV2 API that roll up the
decisions of kv pairs during compactions. These kv pairs must share the
same key prefix. They are buffered inside the db.
typedef std::vector<Slice> SliceVector;
virtual std::vector<bool> Filter(int level,
const SliceVector& keys,
const SliceVector& existing_values,
std::vector<std::string>* new_values,
std::vector<bool>* values_changed
) const = 0;
Application can override the Filter() function to operate
on the buffered kv pairs. More details in the inline documentation.
Test Plan:
make check. Added unit tests to make sure Keep, Delete,
Change all works.
Reviewers: haobo
CCs: leveldb
Differential Revision: https://reviews.facebook.net/D15087
Summary:
Everytime a client opens a DB, we do a sanity check that:
* checks the existance of all the necessary files
* verifies that file sizes are correct
Some of the code was stolen from https://reviews.facebook.net/D16935
Test Plan: added a unit test
Reviewers: dhruba, haobo, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17097
Summary: Added a function/command to check the consistency of live files' meta data
Test Plan:
Manual test (size mismatch, file not exist).
Command test script.
Reviewers: haobo
Reviewed By: haobo
CC: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D16935
Summary:
I'm cleaning up some code preparing for the big diff review tomorrow. This is the first part of the cleanup.
Changes are mostly cosmetic. The goal is to decrease amount of code difference between columnfamilies and master branch.
This diff also fixes race condition when dropping column family.
Test Plan: Ran db_stress with variety of parameters
Reviewers: dhruba, haobo
Differential Revision: https://reviews.facebook.net/D16833
Summary: Add a function to Env so that users can query the waiting queue length of each thread pool
Test Plan: add a test in env_test
Reviewers: haobo
Reviewed By: haobo
CC: dhruba, igor, yhchiang, ljin, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D16755
Igor Canadi